systems/lctr-rpi4: add new system family for the new rpi versions (RPI4)

systems/lctr-rpi4/config

@@ -0,0 +1,17 @@
+cfg_architecture='cortex-a8-hardfp'
+cfg_storage='data0:ext4:/opt'
+cfg_modules=''
+cfg_services0='network dropbear storage upgrade syslog ptpd'
+cfg_services2='dune'
+cfg_packages='dropbear rsync busybox e2fsprogs dosfstools ptpd rpcbind rpi-boot-firmware linux/rpi'
+cfg_target_linux_kernel='arch/arm/boot/zImage'
+cfg_ptpd_interface='eth0'
+cfg_eth_ext_mk='255.255.0.0'
+cfg_eth_ext_gw='10.0.0.1'
+cfg_terminal='tty1'
+cfg_partitions=\
+(
+    rpi-boot BOOT0  512B    128MiB
+    root     root0  128MiB  640MiB
+    data     data0  640MiB  -1
+)

systems/lctr-rpi4/fs/boot/config.txt

@@ -0,0 +1,13 @@
+# Core.
+arm_freq=1000
+sdram_freq=500
+core_freq=500
+over_voltage=2
+temp_limit=80 #Will throttle to default clock speed if hit.
+
+# Disable BT on Rpi3.
+dtoverlay=pi3-disable-bt
+
+# Enable RasPicam
+start_x=1
+gpu_mem=128

systems/lctr-rpi4/fs/etc/inittab

@@ -0,0 +1,4 @@
+::sysinit:/sbin/services sysinit
+::restart:/sbin/init
+::respawn:-/usr/sbin/dropbear -F
+::shutdown:/sbin/services syshalt

systems/lctr-rpi4/fs/etc/mdev.conf

@@ -0,0 +1,2 @@
+ttyAMA0         root:root  660  >terminal
+ttyUSB[0-9]*    root:root  660  */sbin/mdev-ttyusb

systems/lctr-rpi4/fs/etc/rc.d/lauv-storage-client

@@ -0,0 +1,45 @@
+mount_path()
+{
+    rpath="$cfg_lauv_storage_host:$1"
+    lpath="$1"
+
+    mkdir -p "$lpath"
+
+    mount -t nfs -o wsize=32768 "$rpath" "$lpath"
+    if [ $? -eq 0 ]; then
+        echo "* Mounted '$rpath' in '$lpath'"
+        return 0
+    fi
+
+    return 1
+}
+
+start()
+{
+    /usr/bin/rpcbind
+    if [ $? -ne 0 ]; then
+        echo "ERROR: failed to start rpcbind."
+        return 1
+    fi
+
+    for path in $cfg_lauv_storage_paths; do
+        n=0; while [ $n -lt "$cfg_lauv_storage_timeout" ]; do
+                 mount_path "$path"
+                 if [ $? -eq 0 ]; then
+                     break
+                 fi
+
+                 let n++
+                 sleep 1
+             done
+    done
+}
+
+stop()
+{
+    killall rpcbind
+
+    for path in $cfg_lauv_storage_paths; do
+        umount "$path"
+    done
+}

systems/lctr-rpi4/fs/etc/rc.d/lauv-storage-server

@@ -0,0 +1,125 @@
+mount_storage()
+{
+    echo "* Probing storage..."
+
+    bdev="$1"
+    if ! [ -b "$bdev" ]; then
+        echo "* Device $bdev does not exist."
+        return 1
+    fi
+
+    mount -o rw,relatime "$bdev" "$cfg_lauv_storage_dir" 2> /dev/null
+
+    if [ $? -ne 0 ]; then
+        echo "* Failed to mount $bdev on $cfg_lauv_storage_dir"
+        return 1
+    fi
+
+    echo "* Mounted '$bdev' on '$cfg_lauv_storage_dir'"
+    return 0
+}
+
+try_mount_storage()
+{
+    n=0; while [ $n -lt 30 ]; do
+             mount_storage "$1"
+
+             if [ $? -eq 0 ]; then
+                 return 0
+             fi
+
+             sleep 1
+             let n++
+         done
+
+    return 1
+}
+
+start_nfs_server()
+{
+    echo "* Creating NFS administrative folder..."
+    mkdir -p /var/lib/nfs
+    if ! [ -d /var/lib/nfs ]; then
+        echo "ERROR: failed to create data folder."
+        return 1
+    fi
+
+    echo "* Launching rpcbind..."
+    /usr/bin/rpcbind
+    if [ $? -ne 0 ]; then
+        echo "ERROR: failed to start rpcbind."
+        return 1
+    fi
+
+    echo "* Launching rpc.statd..."
+    /usr/bin/rpc.statd
+    if [ $? -ne 0 ]; then
+        echo "ERROR: failed to start rpc.statd."
+        return 1
+    fi
+
+    echo "* Launching rpc.nfsd..."
+    /usr/bin/rpc.nfsd
+    if [ $? -ne 0 ]; then
+        echo "ERROR: failed to start rpc.nfsd."
+        return 1
+    fi
+
+    echo "* Creating NFS filesystem table..."
+    /usr/bin/exportfs -ra
+    if [ $? -ne 0 ]; then
+        echo "ERROR: failed to create filesystem table."
+        return 1
+    fi
+
+    echo "* Launching rpc.mountd..."
+    /usr/bin/rpc.mountd
+    if [ $? -ne 0 ]; then
+        echo "ERROR: failed to start rpc.mountd."
+        return 1
+    fi
+
+    echo "* Exporting NFS filesystems..."
+    /usr/bin/exportfs \
+        -o rw,async,no_root_squash,no_subtree_check \
+        10.0.0.0/16:"$cfg_lauv_storage_dir"
+    if [ $? -ne 0 ]; then
+        echo "ERROR: failed to export filesystems."
+        return 1
+    fi
+}
+
+stop_nfs_server()
+{
+    echo "* Unexporting NFS filesystems..."
+    exportfs -au 2> /dev/null
+    echo "* Terminating rpc.mountd..."
+    killall rpc.mountd 2> /dev/null
+    echo "* Terminating rpc.statd..."
+    killall rpc.statd 2> /dev/null
+    echo "* Terminating rpc.bind..."
+    killall rpcbind 2> /dev/null
+}
+
+start()
+{
+    mkdir -p "$cfg_lauv_storage_dir"
+
+    # Removable storage.
+    if [ "$cfg_lauv_storage" != "internal" ]; then
+        try_mount_storage /dev/sda1
+    fi
+
+    # FIXME: what to do if the above fails.
+    start_nfs_server
+}
+
+stop()
+{
+    stop_nfs_server
+
+    if [ "$cfg_lauv_storage" != "internal" ]; then
+        echo "* Unmounting storage..."
+        umount "$cfg_lauv_storage_dir"
+    fi
+}

systems/lctr-rpi4/template.cfg

@@ -0,0 +1,4 @@
+cfg_hostname='template'
+cfg_eth_ext_ip='10.0.20.125'
+cfg_packages="$cfg_packages opencv"
+cfg_modules="$cfg_modules ftdi_sio rt73usb"