lctr-a9xx: update kernel configuration and patches.
This commit is contained in:
Ricardo Martins
parent
bc9064fcce
commit
26e028f142
@ -285,6 +285,7 @@ CONFIG_ARCH_MULTI_V6_V7=y
|
||||
# CONFIG_ARCH_BCM2835 is not set
|
||||
# CONFIG_ARCH_CNS3XXX is not set
|
||||
# CONFIG_GPIO_PCA953X is not set
|
||||
# CONFIG_KEYBOARD_GPIO_POLLED is not set
|
||||
# CONFIG_ARCH_HIGHBANK is not set
|
||||
# CONFIG_ARCH_KEYSTONE is not set
|
||||
# CONFIG_ARCH_MXC is not set
|
||||
@ -988,7 +989,7 @@ CONFIG_USB_NET_ZAURUS=y
|
||||
#
|
||||
CONFIG_INPUT=y
|
||||
# CONFIG_INPUT_FF_MEMLESS is not set
|
||||
CONFIG_INPUT_POLLDEV=m
|
||||
# CONFIG_INPUT_POLLDEV is not set
|
||||
# CONFIG_INPUT_SPARSEKMAP is not set
|
||||
# CONFIG_INPUT_MATRIXKMAP is not set
|
||||
|
||||
@ -1003,7 +1004,31 @@ CONFIG_INPUT_EVDEV=y
|
||||
#
|
||||
# Input Device Drivers
|
||||
#
|
||||
# CONFIG_INPUT_KEYBOARD is not set
|
||||
CONFIG_INPUT_KEYBOARD=y
|
||||
# CONFIG_KEYBOARD_ADP5588 is not set
|
||||
# CONFIG_KEYBOARD_ADP5589 is not set
|
||||
# CONFIG_KEYBOARD_ATKBD is not set
|
||||
# CONFIG_KEYBOARD_QT1070 is not set
|
||||
# CONFIG_KEYBOARD_QT2160 is not set
|
||||
# CONFIG_KEYBOARD_LKKBD is not set
|
||||
CONFIG_KEYBOARD_GPIO=y
|
||||
# CONFIG_KEYBOARD_TCA6416 is not set
|
||||
# CONFIG_KEYBOARD_TCA8418 is not set
|
||||
# CONFIG_KEYBOARD_MATRIX is not set
|
||||
# CONFIG_KEYBOARD_LM8323 is not set
|
||||
# CONFIG_KEYBOARD_LM8333 is not set
|
||||
# CONFIG_KEYBOARD_MAX7359 is not set
|
||||
# CONFIG_KEYBOARD_MCS is not set
|
||||
# CONFIG_KEYBOARD_MPR121 is not set
|
||||
# CONFIG_KEYBOARD_NEWTON is not set
|
||||
# CONFIG_KEYBOARD_OPENCORES is not set
|
||||
# CONFIG_KEYBOARD_SAMSUNG is not set
|
||||
# CONFIG_KEYBOARD_STOWAWAY is not set
|
||||
# CONFIG_KEYBOARD_SUNKBD is not set
|
||||
# CONFIG_KEYBOARD_SH_KEYSC is not set
|
||||
# CONFIG_KEYBOARD_OMAP4 is not set
|
||||
# CONFIG_KEYBOARD_TWL4030 is not set
|
||||
# CONFIG_KEYBOARD_XTKBD is not set
|
||||
# CONFIG_INPUT_MOUSE is not set
|
||||
# CONFIG_INPUT_JOYSTICK is not set
|
||||
# CONFIG_INPUT_TABLET is not set
|
||||
@ -1403,6 +1428,7 @@ CONFIG_MFD_CORE=y
|
||||
# CONFIG_MFD_SYSCON is not set
|
||||
# CONFIG_MFD_TI_AM335X_TSCADC is not set
|
||||
# CONFIG_MFD_LP8788 is not set
|
||||
CONFIG_MFD_OMAP_USB_HOST=y
|
||||
# CONFIG_MFD_PALMAS is not set
|
||||
# CONFIG_TPS6105X is not set
|
||||
# CONFIG_TPS65010 is not set
|
||||
@ -1623,24 +1649,41 @@ CONFIG_USB_DEFAULT_PERSIST=y
|
||||
#
|
||||
# CONFIG_USB_C67X00_HCD is not set
|
||||
# CONFIG_USB_XHCI_HCD is not set
|
||||
# CONFIG_USB_EHCI_HCD is not set
|
||||
CONFIG_USB_EHCI_HCD=y
|
||||
# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
|
||||
CONFIG_USB_EHCI_TT_NEWSCHED=y
|
||||
CONFIG_USB_EHCI_HCD_OMAP=y
|
||||
# CONFIG_USB_EHCI_HCD_PLATFORM is not set
|
||||
# CONFIG_USB_OXU210HP_HCD is not set
|
||||
# CONFIG_USB_ISP116X_HCD is not set
|
||||
# CONFIG_USB_ISP1760_HCD is not set
|
||||
# CONFIG_USB_ISP1362_HCD is not set
|
||||
# CONFIG_USB_FUSBH200_HCD is not set
|
||||
# CONFIG_USB_FOTG210_HCD is not set
|
||||
# CONFIG_USB_OHCI_HCD is not set
|
||||
CONFIG_USB_OHCI_HCD=y
|
||||
CONFIG_USB_OHCI_HCD_OMAP3=y
|
||||
# CONFIG_USB_OHCI_HCD_PLATFORM is not set
|
||||
# CONFIG_USB_SL811_HCD is not set
|
||||
# CONFIG_USB_R8A66597_HCD is not set
|
||||
# CONFIG_USB_HCD_TEST_MODE is not set
|
||||
# CONFIG_USB_MUSB_HDRC is not set
|
||||
CONFIG_USB_MUSB_HDRC=y
|
||||
# CONFIG_USB_MUSB_HOST is not set
|
||||
# CONFIG_USB_MUSB_GADGET is not set
|
||||
CONFIG_USB_MUSB_DUAL_ROLE=y
|
||||
CONFIG_USB_MUSB_TUSB6010=y
|
||||
# CONFIG_USB_MUSB_OMAP2PLUS is not set
|
||||
# CONFIG_USB_MUSB_AM35X is not set
|
||||
# CONFIG_USB_MUSB_DSPS is not set
|
||||
# CONFIG_USB_MUSB_UX500 is not set
|
||||
# CONFIG_USB_TI_CPPI41_DMA is not set
|
||||
# CONFIG_USB_TUSB_OMAP_DMA is not set
|
||||
CONFIG_MUSB_PIO_ONLY=y
|
||||
# CONFIG_USB_RENESAS_USBHS is not set
|
||||
|
||||
#
|
||||
# USB Device Class drivers
|
||||
#
|
||||
# CONFIG_USB_ACM is not set
|
||||
CONFIG_USB_ACM=y
|
||||
# CONFIG_USB_PRINTER is not set
|
||||
# CONFIG_USB_WDM is not set
|
||||
# CONFIG_USB_TMC is not set
|
||||
@ -1679,7 +1722,59 @@ CONFIG_USB_STORAGE=y
|
||||
#
|
||||
# USB port drivers
|
||||
#
|
||||
# CONFIG_USB_SERIAL is not set
|
||||
CONFIG_USB_SERIAL=y
|
||||
# CONFIG_USB_SERIAL_CONSOLE is not set
|
||||
# CONFIG_USB_SERIAL_GENERIC is not set
|
||||
# CONFIG_USB_SERIAL_SIMPLE is not set
|
||||
# CONFIG_USB_SERIAL_AIRCABLE is not set
|
||||
# CONFIG_USB_SERIAL_ARK3116 is not set
|
||||
# CONFIG_USB_SERIAL_BELKIN is not set
|
||||
# CONFIG_USB_SERIAL_CH341 is not set
|
||||
# CONFIG_USB_SERIAL_WHITEHEAT is not set
|
||||
# CONFIG_USB_SERIAL_DIGI_ACCELEPORT is not set
|
||||
# CONFIG_USB_SERIAL_CP210X is not set
|
||||
# CONFIG_USB_SERIAL_CYPRESS_M8 is not set
|
||||
# CONFIG_USB_SERIAL_EMPEG is not set
|
||||
# CONFIG_USB_SERIAL_FTDI_SIO is not set
|
||||
# CONFIG_USB_SERIAL_VISOR is not set
|
||||
# CONFIG_USB_SERIAL_IPAQ is not set
|
||||
# CONFIG_USB_SERIAL_IR is not set
|
||||
# CONFIG_USB_SERIAL_EDGEPORT is not set
|
||||
# CONFIG_USB_SERIAL_EDGEPORT_TI is not set
|
||||
# CONFIG_USB_SERIAL_F81232 is not set
|
||||
# CONFIG_USB_SERIAL_GARMIN is not set
|
||||
# CONFIG_USB_SERIAL_IPW is not set
|
||||
# CONFIG_USB_SERIAL_IUU is not set
|
||||
# CONFIG_USB_SERIAL_KEYSPAN_PDA is not set
|
||||
# CONFIG_USB_SERIAL_KEYSPAN is not set
|
||||
# CONFIG_USB_SERIAL_KLSI is not set
|
||||
# CONFIG_USB_SERIAL_KOBIL_SCT is not set
|
||||
# CONFIG_USB_SERIAL_MCT_U232 is not set
|
||||
# CONFIG_USB_SERIAL_METRO is not set
|
||||
# CONFIG_USB_SERIAL_MOS7720 is not set
|
||||
# CONFIG_USB_SERIAL_MOS7840 is not set
|
||||
# CONFIG_USB_SERIAL_NAVMAN is not set
|
||||
# CONFIG_USB_SERIAL_PL2303 is not set
|
||||
# CONFIG_USB_SERIAL_OTI6858 is not set
|
||||
# CONFIG_USB_SERIAL_QCAUX is not set
|
||||
# CONFIG_USB_SERIAL_QUALCOMM is not set
|
||||
# CONFIG_USB_SERIAL_SPCP8X5 is not set
|
||||
# CONFIG_USB_SERIAL_SAFE is not set
|
||||
# CONFIG_USB_SERIAL_SIERRAWIRELESS is not set
|
||||
# CONFIG_USB_SERIAL_SYMBOL is not set
|
||||
# CONFIG_USB_SERIAL_TI is not set
|
||||
# CONFIG_USB_SERIAL_CYBERJACK is not set
|
||||
# CONFIG_USB_SERIAL_XIRCOM is not set
|
||||
CONFIG_USB_SERIAL_WWAN=y
|
||||
CONFIG_USB_SERIAL_OPTION=y
|
||||
# CONFIG_USB_SERIAL_OMNINET is not set
|
||||
# CONFIG_USB_SERIAL_OPTICON is not set
|
||||
# CONFIG_USB_SERIAL_XSENS_MT is not set
|
||||
# CONFIG_USB_SERIAL_WISHBONE is not set
|
||||
# CONFIG_USB_SERIAL_ZTE is not set
|
||||
# CONFIG_USB_SERIAL_SSU100 is not set
|
||||
# CONFIG_USB_SERIAL_QT2 is not set
|
||||
# CONFIG_USB_SERIAL_DEBUG is not set
|
||||
|
||||
#
|
||||
# USB Miscellaneous drivers
|
||||
@ -1697,6 +1792,7 @@ CONFIG_USB_STORAGE=y
|
||||
# CONFIG_USB_IDMOUSE is not set
|
||||
# CONFIG_USB_FTDI_ELAN is not set
|
||||
# CONFIG_USB_APPLEDISPLAY is not set
|
||||
# CONFIG_USB_SISUSBVGA is not set
|
||||
# CONFIG_USB_LD is not set
|
||||
# CONFIG_USB_TRANCEVIBRATOR is not set
|
||||
# CONFIG_USB_IOWARRIOR is not set
|
||||
@ -1740,10 +1836,17 @@ CONFIG_USB_GADGET_STORAGE_NUM_BUFFERS=2
|
||||
# CONFIG_USB_M66592 is not set
|
||||
# CONFIG_USB_NET2272 is not set
|
||||
# CONFIG_USB_DUMMY_HCD is not set
|
||||
CONFIG_USB_LIBCOMPOSITE=y
|
||||
CONFIG_USB_U_ETHER=y
|
||||
CONFIG_USB_U_RNDIS=y
|
||||
CONFIG_USB_F_ECM=y
|
||||
CONFIG_USB_F_SUBSET=y
|
||||
# CONFIG_USB_CONFIGFS is not set
|
||||
# CONFIG_USB_ZERO is not set
|
||||
# CONFIG_USB_AUDIO is not set
|
||||
# CONFIG_USB_ETH is not set
|
||||
CONFIG_USB_ETH=y
|
||||
# CONFIG_USB_ETH_RNDIS is not set
|
||||
# CONFIG_USB_ETH_EEM is not set
|
||||
# CONFIG_USB_G_NCM is not set
|
||||
# CONFIG_USB_GADGETFS is not set
|
||||
# CONFIG_USB_FUNCTIONFS is not set
|
||||
@ -1812,7 +1915,20 @@ CONFIG_LEDS_GPIO=y
|
||||
#
|
||||
# LED Triggers
|
||||
#
|
||||
# CONFIG_LEDS_TRIGGERS is not set
|
||||
CONFIG_LEDS_TRIGGERS=y
|
||||
# CONFIG_LEDS_TRIGGER_TIMER is not set
|
||||
CONFIG_LEDS_TRIGGER_ONESHOT=y
|
||||
CONFIG_LEDS_TRIGGER_HEARTBEAT=y
|
||||
# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set
|
||||
# CONFIG_LEDS_TRIGGER_CPU is not set
|
||||
# CONFIG_LEDS_TRIGGER_GPIO is not set
|
||||
CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
|
||||
|
||||
#
|
||||
# iptables trigger is under Netfilter config (LED target)
|
||||
#
|
||||
# CONFIG_LEDS_TRIGGER_TRANSIENT is not set
|
||||
# CONFIG_LEDS_TRIGGER_CAMERA is not set
|
||||
# CONFIG_ACCESSIBILITY is not set
|
||||
# CONFIG_EDAC is not set
|
||||
CONFIG_RTC_LIB=y
|
||||
@ -1834,7 +1950,7 @@ CONFIG_RTC_INTF_DEV=y
|
||||
#
|
||||
# I2C RTC drivers
|
||||
#
|
||||
# CONFIG_RTC_DRV_DS1307 is not set
|
||||
CONFIG_RTC_DRV_DS1307=y
|
||||
# CONFIG_RTC_DRV_DS1374 is not set
|
||||
# CONFIG_RTC_DRV_DS1672 is not set
|
||||
# CONFIG_RTC_DRV_DS3232 is not set
|
||||
@ -1849,7 +1965,7 @@ CONFIG_RTC_INTF_DEV=y
|
||||
# CONFIG_RTC_DRV_PCF8583 is not set
|
||||
# CONFIG_RTC_DRV_M41T80 is not set
|
||||
# CONFIG_RTC_DRV_BQ32K is not set
|
||||
CONFIG_RTC_DRV_TWL4030=y
|
||||
# CONFIG_RTC_DRV_TWL4030 is not set
|
||||
# CONFIG_RTC_DRV_S35390A is not set
|
||||
# CONFIG_RTC_DRV_FM3130 is not set
|
||||
# CONFIG_RTC_DRV_RX8581 is not set
|
||||
@ -2002,6 +2118,7 @@ CONFIG_FS_MBCACHE=y
|
||||
# CONFIG_JFS_FS is not set
|
||||
# CONFIG_XFS_FS is not set
|
||||
# CONFIG_GFS2_FS is not set
|
||||
# CONFIG_OCFS2_FS is not set
|
||||
# CONFIG_BTRFS_FS is not set
|
||||
# CONFIG_NILFS2_FS is not set
|
||||
# CONFIG_FS_POSIX_ACL is not set
|
||||
@ -2047,7 +2164,7 @@ CONFIG_TMPFS=y
|
||||
# CONFIG_TMPFS_POSIX_ACL is not set
|
||||
# CONFIG_TMPFS_XATTR is not set
|
||||
# CONFIG_HUGETLB_PAGE is not set
|
||||
# CONFIG_CONFIGFS_FS is not set
|
||||
CONFIG_CONFIGFS_FS=y
|
||||
# CONFIG_MISC_FILESYSTEMS is not set
|
||||
# CONFIG_NETWORK_FILESYSTEMS is not set
|
||||
CONFIG_NLS=y
|
||||
@ -2101,6 +2218,7 @@ CONFIG_NLS_ISO8859_1=y
|
||||
# CONFIG_NLS_MAC_ROMANIAN is not set
|
||||
# CONFIG_NLS_MAC_TURKISH is not set
|
||||
CONFIG_NLS_UTF8=y
|
||||
# CONFIG_DLM is not set
|
||||
|
||||
#
|
||||
# Kernel hacking
|
||||
|
||||
@ -6,7 +6,7 @@ cfg_services1='huawei ntpd'
|
||||
cfg_services2='dune'
|
||||
cfg_packages='u-boot dropbear rsync busybox linux uswitch ppp iptables socat bridge-utils ntp e2fsprogs i2c-tools iperf dnsmasq'
|
||||
cfg_target_linux_kernel='arch/arm/boot/zImage'
|
||||
cfg_target_linux_dtb='arch/arm/boot/dts/omap3-igep0020.dtb'
|
||||
cfg_target_linux_dtb='arch/arm/boot/dts/omap3-igep0020-manta.dtb'
|
||||
cfg_target_uboot_config='igep0020_lsts'
|
||||
cfg_terminal='ttyO2'
|
||||
cfg_ntpd_config='/etc/ntp/server.cfg'
|
||||
|
||||
@ -0,0 +1,10 @@
|
||||
--- linux-3.13/arch/arm/boot/dts/Makefile 2014-01-20 02:40:07.000000000 +0000
|
||||
+++ linux-3.13.rasm/arch/arm/boot/dts/Makefile 2014-01-31 03:29:41.495659458 +0000
|
||||
@@ -185,6 +185,7 @@
|
||||
omap3-tobi.dtb \
|
||||
omap3-gta04.dtb \
|
||||
omap3-igep0020.dtb \
|
||||
+ omap3-igep0020-manta.dtb \
|
||||
omap3-igep0030.dtb \
|
||||
omap3-zoom3.dtb \
|
||||
omap4-panda.dtb \
|
||||
@ -0,0 +1,116 @@
|
||||
--- linux-3.13/arch/arm/boot/dts/omap3-igep0020-manta.dts 1970-01-01 01:00:00.000000000 +0100
|
||||
+++ linux-3.13.rasm/arch/arm/boot/dts/omap3-igep0020-manta.dts 2014-01-31 03:30:13.453357542 +0000
|
||||
@@ -0,0 +1,113 @@
|
||||
+/*
|
||||
+ * Copyright (C) 2014 Universidade do Porto - Faculdade de Engenharia
|
||||
+ *
|
||||
+ * This program is free software; you can redistribute it and/or modify
|
||||
+ * it under the terms of the GNU General Public License version 2 as
|
||||
+ * published by the Free Software Foundation.
|
||||
+ */
|
||||
+
|
||||
+#include <dt-bindings/input/input.h>
|
||||
+#include "omap3-igep0020.dts"
|
||||
+
|
||||
+/ {
|
||||
+ model = "Manta A2XX/A3XX";
|
||||
+ compatible = "isee,omap3-igep0020", "ti,omap3";
|
||||
+
|
||||
+ leds {
|
||||
+ boot {
|
||||
+ linux,default-trigger = "heartbeat";
|
||||
+ };
|
||||
+ };
|
||||
+
|
||||
+ gpio_keys {
|
||||
+ pinctrl-names = "default";
|
||||
+ pinctrl-0 = <&gpio_keys_pins>;
|
||||
+ compatible = "gpio-keys";
|
||||
+
|
||||
+ button0 {
|
||||
+ label = "Button 0";
|
||||
+ gpios = <&gpio5 11 GPIO_ACTIVE_HIGH>; /* gpio_139 */
|
||||
+ linux,code = <BTN_0>;
|
||||
+ debounce-interval = <5>;
|
||||
+ };
|
||||
+
|
||||
+ button1 {
|
||||
+ label = "Button 1";
|
||||
+ gpios = <&gpio5 10 GPIO_ACTIVE_HIGH>; /* gpio_138 */
|
||||
+ linux,code = <BTN_1>;
|
||||
+ debounce-interval = <5>;
|
||||
+ };
|
||||
+
|
||||
+ button2 {
|
||||
+ label = "Button 2";
|
||||
+ gpios = <&gpio5 9 GPIO_ACTIVE_HIGH>; /* gpio_137 */
|
||||
+ linux,code = <BTN_2>;
|
||||
+ debounce-interval = <5>;
|
||||
+ };
|
||||
+ };
|
||||
+
|
||||
+ pps {
|
||||
+ compatible = "pps-gpio";
|
||||
+ pinctrl-names = "default";
|
||||
+ pinctrl-0 = <&pps_pins>;
|
||||
+ gpios = <&gpio5 8 GPIO_ACTIVE_HIGH>;
|
||||
+ assert-rising-edge;
|
||||
+ };
|
||||
+};
|
||||
+
|
||||
+&omap3_pmx_core {
|
||||
+ gpio_keys_pins: pinmux_gpio_keys_pins {
|
||||
+ pinctrl-single,pins = <
|
||||
+ 0x136 (PIN_INPUT_PULLDOWN | MUX_MODE4) /* gpio_137 - button 2 */
|
||||
+ 0x138 (PIN_INPUT_PULLDOWN | MUX_MODE4) /* gpio_138 - button 1 */
|
||||
+ 0x13a (PIN_INPUT_PULLDOWN | MUX_MODE4) /* gpio_139 - button 0 */
|
||||
+ >;
|
||||
+ };
|
||||
+
|
||||
+ pps_pins: pinmux_pps_pins {
|
||||
+ pinctrl-single,pins = <
|
||||
+ 0x134 (PIN_INPUT_PULLDOWN | MUX_MODE4) /* gpio_136 */
|
||||
+ >;
|
||||
+ };
|
||||
+
|
||||
+ panel_pins: pinmux_panel_pins {
|
||||
+ pinctrl-single,pins = <
|
||||
+ 0x130 (PIN_OUTPUT | MUX_MODE4) /* gpio_133 - panel backlight */
|
||||
+ 0x132 (PIN_OUTPUT | MUX_MODE4) /* gpio_135 - panel LED */
|
||||
+ >;
|
||||
+ };
|
||||
+
|
||||
+ txd_pins: pinmux_txd_pins {
|
||||
+ pinctrl-single,pins = <
|
||||
+ 0x15e (PIN_INPUT_PULLUP | MUX_MODE4) /* gpio_157 */
|
||||
+ >;
|
||||
+ };
|
||||
+
|
||||
+ uart1_rs232_pins: pinmux_uart1_rs232_pins {
|
||||
+ pinctrl-single,pins = <
|
||||
+ 0x150 (PIN_INPUT | MUX_MODE4) /* uart1_cts.gpio_150 */
|
||||
+ 0x14e (PIN_INPUT | MUX_MODE4) /* uart1_rts.gpio_149 */
|
||||
+ >;
|
||||
+ };
|
||||
+};
|
||||
+
|
||||
+&i2c2 {
|
||||
+ rtc@68 {
|
||||
+ compatible = "dallas,ds1307";
|
||||
+ reg = <0x68>;
|
||||
+ };
|
||||
+};
|
||||
+
|
||||
+/* Disable WiFi/Bluetooth combo. */
|
||||
+&mmc2 {
|
||||
+ status = "disabled";
|
||||
+};
|
||||
+
|
||||
+&vdd33 {
|
||||
+ status = "disabled";
|
||||
+};
|
||||
+
|
||||
+&lbee1usjyc_vmmc {
|
||||
+ status = "disabled";
|
||||
+};
|
||||
+
|
||||
@ -1,16 +0,0 @@
|
||||
--- linux-omap-2.6.35.9-0.ori/drivers/usb/serial/option.c 2010-11-23 07:41:25.000000000 +0000
|
||||
+++ linux-omap-2.6.35.9-0/drivers/usb/serial/option.c 2010-12-10 04:07:00.352473367 +0000
|
||||
@@ -1050,6 +1050,13 @@
|
||||
serial->interface->cur_altsetting->desc.bInterfaceNumber == 1)
|
||||
return -ENODEV;
|
||||
|
||||
+ /* Don't bind useless interfaces on Huawei E1550 */
|
||||
+ if ((serial->dev->descriptor.idVendor == HUAWEI_VENDOR_ID &&
|
||||
+ serial->dev->descriptor.idProduct == 0x140C) &&
|
||||
+ (serial->interface->cur_altsetting->desc.bInterfaceNumber == 1 ||
|
||||
+ serial->interface->cur_altsetting->desc.bInterfaceNumber == 2))
|
||||
+ return -ENODEV;
|
||||
+
|
||||
data = serial->private = kzalloc(sizeof(struct usb_wwan_intf_private), GFP_KERNEL);
|
||||
|
||||
if (!data)
|
||||
@ -1,11 +0,0 @@
|
||||
--- linux-3.3.1/arch/arm/mach-omap2/Makefile 2012-04-02 18:32:52.000000000 +0100
|
||||
+++ linux-3.3.1.rasm/arch/arm/mach-omap2/Makefile 2012-05-07 18:24:37.490190256 +0100
|
||||
@@ -224,7 +224,7 @@
|
||||
board-zoom-display.o
|
||||
obj-$(CONFIG_MACH_CM_T35) += board-cm-t35.o
|
||||
obj-$(CONFIG_MACH_CM_T3517) += board-cm-t3517.o
|
||||
-obj-$(CONFIG_MACH_IGEP0020) += board-igep0020.o
|
||||
+obj-$(CONFIG_MACH_IGEP0020) += board-igep0020.o manta-axxx.o
|
||||
obj-$(CONFIG_MACH_OMAP3_TOUCHBOOK) += board-omap3touchbook.o
|
||||
obj-$(CONFIG_MACH_OMAP_4430SDP) += board-4430sdp.o
|
||||
obj-$(CONFIG_MACH_OMAP4_PANDA) += board-omap4panda.o
|
||||
@ -1,22 +0,0 @@
|
||||
--- linux-3.3.1/arch/arm/mach-omap2/board-igep0020.c 2012-04-02 18:32:52.000000000 +0100
|
||||
+++ linux-3.3.1.rasm/arch/arm/mach-omap2/board-igep0020.c 2012-05-07 18:24:05.423120776 +0100
|
||||
@@ -633,6 +633,9 @@
|
||||
static inline void __init igep_wlan_bt_init(void) { }
|
||||
#endif
|
||||
|
||||
+/* Customization for Manta Axxx */
|
||||
+extern void __init manta_axxx_init(void);
|
||||
+
|
||||
static void __init igep_init(void)
|
||||
{
|
||||
omap3_mux_init(board_mux, OMAP_PACKAGE_CBB);
|
||||
@@ -650,6 +653,9 @@
|
||||
igep_flash_init();
|
||||
igep_leds_init();
|
||||
|
||||
+ /* Customization for Manta A2xx */
|
||||
+ manta_axxx_init();
|
||||
+
|
||||
/*
|
||||
* WLAN-BT combo module from MuRata which has a Marvell WLAN
|
||||
* (88W8686) + CSR Bluetooth chipset. Uses SDIO interface.
|
||||
@ -1,143 +0,0 @@
|
||||
--- /dev/null 2012-10-06 13:48:21.217530758 +0100
|
||||
+++ linux-3.5.4/arch/arm/mach-omap2/manta-axxx.c 2012-10-08 16:02:17.605353112 +0100
|
||||
@@ -0,0 +1,140 @@
|
||||
+//***************************************************************************
|
||||
+// Copyright (C) 2010 Laboratório de Sistemas e Tecnologia Subaquática *
|
||||
+// Departamento de Engenharia Electrotécnica e de Computadores *
|
||||
+// Rua Dr. Roberto Frias, 4200-465 Porto, Portugal *
|
||||
+//***************************************************************************
|
||||
+// Author: Ricardo Martins *
|
||||
+//***************************************************************************
|
||||
+
|
||||
+// Linux headers.
|
||||
+#include <linux/gpio.h>
|
||||
+#include <linux/gpio_keys.h>
|
||||
+#include <linux/i2c.h>
|
||||
+#include <linux/input.h>
|
||||
+#include <linux/interrupt.h>
|
||||
+#include <linux/irq.h>
|
||||
+#include <linux/platform_device.h>
|
||||
+#include <linux/slab.h>
|
||||
+#include <linux/time.h>
|
||||
+#include <linux/timer.h>
|
||||
+#include <plat/i2c.h>
|
||||
+#include <linux/pps-gpio.h>
|
||||
+
|
||||
+// Machine headers.
|
||||
+#include "mux.h"
|
||||
+
|
||||
+// Buttons
|
||||
+#define MANTA_AXXX_GPIO_BTN0 139
|
||||
+#define MANTA_AXXX_GPIO_BTN1 138
|
||||
+#define MANTA_AXXX_GPIO_BTN2 137
|
||||
+
|
||||
+// PPS
|
||||
+#define MANTA_AXXX_GPIO_PPS0 136
|
||||
+
|
||||
+// Transducer connected
|
||||
+#define MANTA_AXXX_GPIO_TXDC 157
|
||||
+
|
||||
+// Outputs
|
||||
+#define MANTA_AXXX_GPIO_LED0 135
|
||||
+#define MANTA_AXXX_GPIO_LCDL 133
|
||||
+
|
||||
+static struct gpio_keys_button manta_axxx_gpio_buttons[] =
|
||||
+{
|
||||
+ {
|
||||
+ .code = BTN_0,
|
||||
+ .gpio = MANTA_AXXX_GPIO_BTN0,
|
||||
+ .desc = "btn0",
|
||||
+ .wakeup = 1,
|
||||
+ .debounce_interval = 2,
|
||||
+ },
|
||||
+ {
|
||||
+ .code = BTN_1,
|
||||
+ .gpio = MANTA_AXXX_GPIO_BTN1,
|
||||
+ .desc = "btn1",
|
||||
+ .wakeup = 1,
|
||||
+ .debounce_interval = 2,
|
||||
+ },
|
||||
+ {
|
||||
+ .code = BTN_2,
|
||||
+ .gpio = MANTA_AXXX_GPIO_BTN2,
|
||||
+ .desc = "btn2",
|
||||
+ .wakeup = 1,
|
||||
+ .debounce_interval = 2,
|
||||
+ },
|
||||
+};
|
||||
+
|
||||
+static struct gpio_keys_platform_data manta_axxx_gpio_key_info =
|
||||
+{
|
||||
+ .buttons = manta_axxx_gpio_buttons,
|
||||
+ .nbuttons = ARRAY_SIZE(manta_axxx_gpio_buttons),
|
||||
+};
|
||||
+
|
||||
+static struct platform_device manta_axxx_keys_gpio =
|
||||
+{
|
||||
+ .name = "gpio-keys",
|
||||
+ .id = -1,
|
||||
+ .dev = {
|
||||
+ .platform_data = &manta_axxx_gpio_key_info,
|
||||
+ },
|
||||
+};
|
||||
+
|
||||
+static struct platform_device* manta_axxx_devices[] __initdata =
|
||||
+{
|
||||
+ &manta_axxx_keys_gpio
|
||||
+};
|
||||
+
|
||||
+static struct i2c_board_info __initdata i2c_devices[] =
|
||||
+{
|
||||
+ {
|
||||
+ I2C_BOARD_INFO("ds1307", 0x68),
|
||||
+ },
|
||||
+};
|
||||
+
|
||||
+/* PPS-GPIO platform data */
|
||||
+static struct pps_gpio_platform_data pps_gpio_info = {
|
||||
+ .assert_falling_edge = false,
|
||||
+ .capture_clear = false,
|
||||
+ .gpio_pin = MANTA_AXXX_GPIO_PPS0,
|
||||
+ .gpio_label = "PPS",
|
||||
+};
|
||||
+
|
||||
+static struct platform_device pps_gpio_device = {
|
||||
+ .name = "pps-gpio",
|
||||
+ .id = -1,
|
||||
+ .dev = {
|
||||
+ .platform_data = &pps_gpio_info
|
||||
+ },
|
||||
+};
|
||||
+
|
||||
+void __init
|
||||
+manta_axxx_init(void)
|
||||
+{
|
||||
+ // Initialize GPIOs.
|
||||
+ omap_mux_init_gpio(MANTA_AXXX_GPIO_PPS0, OMAP_PIN_INPUT);
|
||||
+ omap_mux_init_gpio(MANTA_AXXX_GPIO_BTN0, OMAP_PIN_INPUT_PULLDOWN);
|
||||
+ omap_mux_init_gpio(MANTA_AXXX_GPIO_BTN1, OMAP_PIN_INPUT_PULLDOWN);
|
||||
+ omap_mux_init_gpio(MANTA_AXXX_GPIO_BTN2, OMAP_PIN_INPUT_PULLDOWN);
|
||||
+ omap_mux_init_gpio(MANTA_AXXX_GPIO_TXDC, OMAP_PIN_INPUT_PULLUP);
|
||||
+ omap_mux_init_gpio(MANTA_AXXX_GPIO_LED0, OMAP_PIN_OUTPUT);
|
||||
+ omap_mux_init_gpio(MANTA_AXXX_GPIO_LCDL, OMAP_PIN_OUTPUT);
|
||||
+
|
||||
+ // Initialize PPS.
|
||||
+ if (platform_device_register(&pps_gpio_device))
|
||||
+ pr_warning("failed to register PPS GPIO");
|
||||
+
|
||||
+ omap_register_i2c_bus(2, 100, i2c_devices, ARRAY_SIZE(i2c_devices));
|
||||
+
|
||||
+ if (gpio_request(MANTA_AXXX_GPIO_LED0, "Status LED") == 0)
|
||||
+ {
|
||||
+ gpio_direction_output(MANTA_AXXX_GPIO_LED0, 1);
|
||||
+ gpio_export(MANTA_AXXX_GPIO_LED0, 1);
|
||||
+ }
|
||||
+
|
||||
+ if (gpio_request(MANTA_AXXX_GPIO_LCDL, "LCD Backlight") == 0)
|
||||
+ {
|
||||
+ gpio_direction_output(MANTA_AXXX_GPIO_LCDL, 1);
|
||||
+ gpio_export(MANTA_AXXX_GPIO_LCDL, 1);
|
||||
+ }
|
||||
+
|
||||
+ platform_add_devices(manta_axxx_devices, ARRAY_SIZE(manta_axxx_devices));
|
||||
+}
|
||||
@ -1,249 +0,0 @@
|
||||
From 603684c9a5f62460cd63147d25dd13c7a7395e1d Mon Sep 17 00:00:00 2001
|
||||
From: Paolo Pisati <paolo.pisati@canonical.com>
|
||||
Date: Sun, 24 Jun 2012 16:31:18 +0000
|
||||
Subject: [PATCH 1/3] UBUNTU: SAUCE: Revert "Fix OMAP EHCI suspend/resume
|
||||
failure (i693)"
|
||||
|
||||
This reverts commit 354ab8567ae3107a8cbe7228c3181990ba598aac.
|
||||
|
||||
BugLink: http://bugs/launchpad.net/bugs/1017718
|
||||
|
||||
Here is the thread where they discuss the issue:
|
||||
|
||||
http://comments.gmane.org/gmane.linux.usb.general/66239
|
||||
"OMAP: USB : Fix the EHCI enumeration and core retention issue"
|
||||
|
||||
Revert will come down in one of the following 3.5rcX, in the mean time
|
||||
we do it on our own.
|
||||
|
||||
Signed-off-by: Paolo Pisati <paolo.pisati@canonical.com>
|
||||
---
|
||||
drivers/usb/host/ehci-omap.c | 168 +-----------------------------------------
|
||||
1 file changed, 1 insertion(+), 167 deletions(-)
|
||||
|
||||
diff --git a/drivers/usb/host/ehci-omap.c b/drivers/usb/host/ehci-omap.c
|
||||
index 17cfb8a..a44294d 100644
|
||||
--- a/drivers/usb/host/ehci-omap.c
|
||||
+++ b/drivers/usb/host/ehci-omap.c
|
||||
@@ -43,7 +43,6 @@
|
||||
#include <linux/regulator/consumer.h>
|
||||
#include <linux/pm_runtime.h>
|
||||
#include <linux/gpio.h>
|
||||
-#include <linux/clk.h>
|
||||
|
||||
/* EHCI Register Set */
|
||||
#define EHCI_INSNREG04 (0xA0)
|
||||
@@ -56,15 +55,6 @@
|
||||
#define EHCI_INSNREG05_ULPI_EXTREGADD_SHIFT 8
|
||||
#define EHCI_INSNREG05_ULPI_WRDATA_SHIFT 0
|
||||
|
||||
-/* Errata i693 */
|
||||
-static struct clk *utmi_p1_fck;
|
||||
-static struct clk *utmi_p2_fck;
|
||||
-static struct clk *xclk60mhsp1_ck;
|
||||
-static struct clk *xclk60mhsp2_ck;
|
||||
-static struct clk *usbhost_p1_fck;
|
||||
-static struct clk *usbhost_p2_fck;
|
||||
-static struct clk *init_60m_fclk;
|
||||
-
|
||||
/*-------------------------------------------------------------------------*/
|
||||
|
||||
static const struct hc_driver ehci_omap_hc_driver;
|
||||
@@ -80,41 +70,6 @@ static inline u32 ehci_read(void __iomem *base, u32 reg)
|
||||
return __raw_readl(base + reg);
|
||||
}
|
||||
|
||||
-/* Erratum i693 workaround sequence */
|
||||
-static void omap_ehci_erratum_i693(struct ehci_hcd *ehci)
|
||||
-{
|
||||
- int ret = 0;
|
||||
-
|
||||
- /* Switch to the internal 60 MHz clock */
|
||||
- ret = clk_set_parent(utmi_p1_fck, init_60m_fclk);
|
||||
- if (ret != 0)
|
||||
- ehci_err(ehci, "init_60m_fclk set parent"
|
||||
- "failed error:%d\n", ret);
|
||||
-
|
||||
- ret = clk_set_parent(utmi_p2_fck, init_60m_fclk);
|
||||
- if (ret != 0)
|
||||
- ehci_err(ehci, "init_60m_fclk set parent"
|
||||
- "failed error:%d\n", ret);
|
||||
-
|
||||
- clk_enable(usbhost_p1_fck);
|
||||
- clk_enable(usbhost_p2_fck);
|
||||
-
|
||||
- /* Wait 1ms and switch back to the external clock */
|
||||
- mdelay(1);
|
||||
- ret = clk_set_parent(utmi_p1_fck, xclk60mhsp1_ck);
|
||||
- if (ret != 0)
|
||||
- ehci_err(ehci, "xclk60mhsp1_ck set parent"
|
||||
- "failed error:%d\n", ret);
|
||||
-
|
||||
- ret = clk_set_parent(utmi_p2_fck, xclk60mhsp2_ck);
|
||||
- if (ret != 0)
|
||||
- ehci_err(ehci, "xclk60mhsp2_ck set parent"
|
||||
- "failed error:%d\n", ret);
|
||||
-
|
||||
- clk_disable(usbhost_p1_fck);
|
||||
- clk_disable(usbhost_p2_fck);
|
||||
-}
|
||||
-
|
||||
static void omap_ehci_soft_phy_reset(struct platform_device *pdev, u8 port)
|
||||
{
|
||||
struct usb_hcd *hcd = dev_get_drvdata(&pdev->dev);
|
||||
@@ -145,50 +100,6 @@ static void omap_ehci_soft_phy_reset(struct platform_device *pdev, u8 port)
|
||||
}
|
||||
}
|
||||
|
||||
-static int omap_ehci_hub_control(
|
||||
- struct usb_hcd *hcd,
|
||||
- u16 typeReq,
|
||||
- u16 wValue,
|
||||
- u16 wIndex,
|
||||
- char *buf,
|
||||
- u16 wLength
|
||||
-)
|
||||
-{
|
||||
- struct ehci_hcd *ehci = hcd_to_ehci(hcd);
|
||||
- u32 __iomem *status_reg = &ehci->regs->port_status[
|
||||
- (wIndex & 0xff) - 1];
|
||||
- u32 temp;
|
||||
- unsigned long flags;
|
||||
- int retval = 0;
|
||||
-
|
||||
- spin_lock_irqsave(&ehci->lock, flags);
|
||||
-
|
||||
- if (typeReq == SetPortFeature && wValue == USB_PORT_FEAT_SUSPEND) {
|
||||
- temp = ehci_readl(ehci, status_reg);
|
||||
- if ((temp & PORT_PE) == 0 || (temp & PORT_RESET) != 0) {
|
||||
- retval = -EPIPE;
|
||||
- goto done;
|
||||
- }
|
||||
-
|
||||
- temp &= ~PORT_WKCONN_E;
|
||||
- temp |= PORT_WKDISC_E | PORT_WKOC_E;
|
||||
- ehci_writel(ehci, temp | PORT_SUSPEND, status_reg);
|
||||
-
|
||||
- omap_ehci_erratum_i693(ehci);
|
||||
-
|
||||
- set_bit((wIndex & 0xff) - 1, &ehci->suspended_ports);
|
||||
- goto done;
|
||||
- }
|
||||
-
|
||||
- spin_unlock_irqrestore(&ehci->lock, flags);
|
||||
-
|
||||
- /* Handle the hub control events here */
|
||||
- return ehci_hub_control(hcd, typeReq, wValue, wIndex, buf, wLength);
|
||||
-done:
|
||||
- spin_unlock_irqrestore(&ehci->lock, flags);
|
||||
- return retval;
|
||||
-}
|
||||
-
|
||||
static void disable_put_regulator(
|
||||
struct ehci_hcd_omap_platform_data *pdata)
|
||||
{
|
||||
@@ -353,76 +264,8 @@ static int ehci_hcd_omap_probe(struct platform_device *pdev)
|
||||
/* root ports should always stay powered */
|
||||
ehci_port_power(omap_ehci, 1);
|
||||
|
||||
- /* get clocks */
|
||||
- utmi_p1_fck = clk_get(dev, "utmi_p1_gfclk");
|
||||
- if (IS_ERR(utmi_p1_fck)) {
|
||||
- ret = PTR_ERR(utmi_p1_fck);
|
||||
- dev_err(dev, "utmi_p1_gfclk failed error:%d\n", ret);
|
||||
- goto err_add_hcd;
|
||||
- }
|
||||
-
|
||||
- xclk60mhsp1_ck = clk_get(dev, "xclk60mhsp1_ck");
|
||||
- if (IS_ERR(xclk60mhsp1_ck)) {
|
||||
- ret = PTR_ERR(xclk60mhsp1_ck);
|
||||
- dev_err(dev, "xclk60mhsp1_ck failed error:%d\n", ret);
|
||||
- goto err_utmi_p1_fck;
|
||||
- }
|
||||
-
|
||||
- utmi_p2_fck = clk_get(dev, "utmi_p2_gfclk");
|
||||
- if (IS_ERR(utmi_p2_fck)) {
|
||||
- ret = PTR_ERR(utmi_p2_fck);
|
||||
- dev_err(dev, "utmi_p2_gfclk failed error:%d\n", ret);
|
||||
- goto err_xclk60mhsp1_ck;
|
||||
- }
|
||||
-
|
||||
- xclk60mhsp2_ck = clk_get(dev, "xclk60mhsp2_ck");
|
||||
- if (IS_ERR(xclk60mhsp2_ck)) {
|
||||
- ret = PTR_ERR(xclk60mhsp2_ck);
|
||||
- dev_err(dev, "xclk60mhsp2_ck failed error:%d\n", ret);
|
||||
- goto err_utmi_p2_fck;
|
||||
- }
|
||||
-
|
||||
- usbhost_p1_fck = clk_get(dev, "usb_host_hs_utmi_p1_clk");
|
||||
- if (IS_ERR(usbhost_p1_fck)) {
|
||||
- ret = PTR_ERR(usbhost_p1_fck);
|
||||
- dev_err(dev, "usbhost_p1_fck failed error:%d\n", ret);
|
||||
- goto err_xclk60mhsp2_ck;
|
||||
- }
|
||||
-
|
||||
- usbhost_p2_fck = clk_get(dev, "usb_host_hs_utmi_p2_clk");
|
||||
- if (IS_ERR(usbhost_p2_fck)) {
|
||||
- ret = PTR_ERR(usbhost_p2_fck);
|
||||
- dev_err(dev, "usbhost_p2_fck failed error:%d\n", ret);
|
||||
- goto err_usbhost_p1_fck;
|
||||
- }
|
||||
-
|
||||
- init_60m_fclk = clk_get(dev, "init_60m_fclk");
|
||||
- if (IS_ERR(init_60m_fclk)) {
|
||||
- ret = PTR_ERR(init_60m_fclk);
|
||||
- dev_err(dev, "init_60m_fclk failed error:%d\n", ret);
|
||||
- goto err_usbhost_p2_fck;
|
||||
- }
|
||||
-
|
||||
return 0;
|
||||
|
||||
-err_usbhost_p2_fck:
|
||||
- clk_put(usbhost_p2_fck);
|
||||
-
|
||||
-err_usbhost_p1_fck:
|
||||
- clk_put(usbhost_p1_fck);
|
||||
-
|
||||
-err_xclk60mhsp2_ck:
|
||||
- clk_put(xclk60mhsp2_ck);
|
||||
-
|
||||
-err_utmi_p2_fck:
|
||||
- clk_put(utmi_p2_fck);
|
||||
-
|
||||
-err_xclk60mhsp1_ck:
|
||||
- clk_put(xclk60mhsp1_ck);
|
||||
-
|
||||
-err_utmi_p1_fck:
|
||||
- clk_put(utmi_p1_fck);
|
||||
-
|
||||
err_add_hcd:
|
||||
disable_put_regulator(pdata);
|
||||
pm_runtime_put_sync(dev);
|
||||
@@ -451,15 +294,6 @@ static int ehci_hcd_omap_remove(struct platform_device *pdev)
|
||||
disable_put_regulator(dev->platform_data);
|
||||
iounmap(hcd->regs);
|
||||
usb_put_hcd(hcd);
|
||||
-
|
||||
- clk_put(utmi_p1_fck);
|
||||
- clk_put(utmi_p2_fck);
|
||||
- clk_put(xclk60mhsp1_ck);
|
||||
- clk_put(xclk60mhsp2_ck);
|
||||
- clk_put(usbhost_p1_fck);
|
||||
- clk_put(usbhost_p2_fck);
|
||||
- clk_put(init_60m_fclk);
|
||||
-
|
||||
pm_runtime_put_sync(dev);
|
||||
pm_runtime_disable(dev);
|
||||
|
||||
@@ -530,7 +364,7 @@ static const struct hc_driver ehci_omap_hc_driver = {
|
||||
* root hub support
|
||||
*/
|
||||
.hub_status_data = ehci_hub_status_data,
|
||||
- .hub_control = omap_ehci_hub_control,
|
||||
+ .hub_control = ehci_hub_control,
|
||||
.bus_suspend = ehci_bus_suspend,
|
||||
.bus_resume = ehci_bus_resume,
|
||||
|
||||
--
|
||||
1.7.9.5
|
||||
|
||||
@ -1,30 +0,0 @@
|
||||
diff -Nru linux-3.5.4/arch/arm/mach-omap2/board-igep0020.c linux-3.5.4.rasm/arch/arm/mach-omap2/board-igep0020.c
|
||||
--- linux-3.5.4/arch/arm/mach-omap2/board-igep0020.c 2012-09-15 00:28:08.000000000 +0200
|
||||
+++ linux-3.5.4.rasm/arch/arm/mach-omap2/board-igep0020.c 2012-10-10 19:57:57.928347091 +0200
|
||||
@@ -611,6 +611,26 @@
|
||||
regulator_register_fixed(1, dummy_supplies, ARRAY_SIZE(dummy_supplies));
|
||||
omap3_mux_init(board_mux, OMAP_PACKAGE_CBB);
|
||||
|
||||
+ /* Change ttyO0 from RS485 to RS232. */
|
||||
+ omap_mux_init_signal("uart1_rts.safe_mode", 0);
|
||||
+ omap_mux_init_signal("uart1_cts.safe_mode", 0);
|
||||
+
|
||||
+ omap_mux_init_gpio(150, OMAP_PIN_INPUT);
|
||||
+ if (gpio_request(150, "UART1_RTS") == 0)
|
||||
+ {
|
||||
+ gpio_direction_input(150);
|
||||
+ gpio_set_value(150, 0);
|
||||
+ gpio_export(150, 1);
|
||||
+ }
|
||||
+
|
||||
+ omap_mux_init_gpio(149, OMAP_PIN_INPUT);
|
||||
+ if (gpio_request(149, "UART1_CTS") == 0)
|
||||
+ {
|
||||
+ gpio_direction_input(149);
|
||||
+ gpio_set_value(149, 0);
|
||||
+ gpio_export(149, 1);
|
||||
+ }
|
||||
+
|
||||
/* Get IGEP2 hardware revision */
|
||||
igep2_get_revision();
|
||||
|
||||
@ -1,11 +0,0 @@
|
||||
--- linux-3.5.4/arch/arm/mach-omap2/board-igep0020.c 2013-04-12 14:14:07.706131422 +0100
|
||||
+++ linux-3.5.4.rasm/arch/arm/mach-omap2/board-igep0020.c 2013-04-12 14:12:18.810582649 +0100
|
||||
@@ -554,6 +554,8 @@
|
||||
|
||||
#ifdef CONFIG_OMAP_MUX
|
||||
static struct omap_board_mux board_mux[] __initdata = {
|
||||
+ /* SMSC9221 LAN Controller ETH IRQ (GPIO_176) */
|
||||
+ OMAP3_MUX(MCSPI1_CS2, OMAP_MUX_MODE4 | OMAP_PIN_INPUT),
|
||||
{ .reg_offset = OMAP_MUX_TERMINATOR },
|
||||
};
|
||||
#endif
|
||||
Reference in New Issue
Block a user