Merge branch 'feature/test_rpi' into feature/gcc_5.4

rules/base/host.bash

@@ -26,4 +26,5 @@ requires=\
     'parted/host'
     'dosfstools/host'
     'e2fsprogs/host'
+    'cmake/host'
 )

rules/filesystem/fs/etc/rc.d/check_wlan

@@ -0,0 +1,15 @@
+start()
+{
+    if [ ! -f /opt/check_wlan ]; then
+        cp -ri /etc/check_wlan /opt/
+    fi
+
+    sh /opt/check_wlan  < /dev/null > /dev/null 2>&1 &
+}
+
+stop()
+{
+    echo "* Stopping process..."
+    killall sh /opt/check_wlan -9 > /dev/null 2>&1
+    echo "* Process not running."
+}

rules/filesystem/fs/etc/rc.d/network-wlan

@@ -0,0 +1,87 @@
+start()
+{
+    ifconfig wlan0 up
+    if [ -n "$cfg_eth_ext_ip$cfg_eth_prv_ip" ]; then
+        while [ 1 ]; do
+            echo "* Waiting for wlan0 device..."
+            ifconfig wlan0 > /dev/null 2>&1
+            [ $? -eq 0 ] && break
+            usleep 250000
+        done
+    fi
+
+    if [ -n "$cfg_bridge0_ip" ]; then
+        for itf in $cfg_bridge0_itfs; do
+            ifconfig $itf 0.0.0.0
+        done
+
+        brctl addbr bridge0
+
+        for itf in $cfg_bridge0_itfs; do
+            brctl addif bridge0 $itf
+        done
+
+        ifconfig bridge0 $cfg_bridge0_ip netmask $cfg_bridge0_nmask up
+        ifconfig bridge0 multicast
+        route add -net 224.0.0.0 netmask 240.0.0.0 dev bridge0
+    fi
+
+    # Public ethernet.
+    if [ -n "$cfg_eth_ext_ip" ]; then
+        if [ -n "$cfg_eth_ext_mk" ]; then
+            ifconfig wlan0 "$cfg_eth_ext_ip" netmask "$cfg_eth_ext_mk" up
+        else
+            ifconfig wlan0 "$cfg_eth_ext_ip" up
+        fi
+        ifconfig wlan0 multicast
+        route add -net 224.0.0.0 netmask 240.0.0.0 dev wlan0
+
+        # Fixed mac address with $cfg_eth_ext_mac based derivated from IP address $cfg_eth_ext_ip
+        if [ -n "$cfg_eth_ext_mac" ]; then
+          ifconfig wlan0 hw ether $cfg_eth_ext_mac
+        fi
+    fi
+
+    if [ -n "$cfg_eth_ext_gw" ]; then
+        route add default gw "$cfg_eth_ext_gw"
+    fi
+
+    if [ -n "$cfg_eth_ext_dns" ]; then
+        echo "nameserver $cfg_eth_ext_dns" > /etc/resolv.conf
+    fi
+
+    # Private ethernet.
+    if [ -n "$cfg_eth_prv_ip" ]; then
+        ifconfig wlan0:prv "$cfg_eth_prv_ip" up
+    fi
+
+    # Static ARP table.
+    if [ -n "$cfg_arp_table" ]; then
+        for e in $cfg_arp_table; do
+            ip="$(echo $e | cut -f1 -d'|')"
+            mac="$(echo $e | cut -f2 -d'|')"
+            arp -s "$ip" "$mac"
+        done
+    fi
+
+    iw wlan0 connect LSTS
+    ifconfig eth0 down
+}
+
+stop()
+{
+    # Public ethernet.
+    if [ -n "$cfg_eth_ext_gw" ]; then
+        route del default
+    fi
+
+    if [ -n "$cfg_eth_ext_ip" ]; then
+        route del -net 224.0.0.0 netmask 240.0.0.0 dev wlan0
+        ifconfig wlan0 down
+    fi
+
+    # Private ethernet.
+    if [ -n "$cfg_eth_prv_ip" ]; then
+        ifconfig wlan0:prv down
+    fi
+}

rules/iw/default.bash

@@ -0,0 +1,34 @@
+version=\
+(
+    "4.9"
+)
+
+url=\
+(
+    "http://lsts.pt/glued/iw-$version.tar.bz2"
+)
+
+md5=\
+(
+  "ae8ccaa154449300c2c02eb90a37eebb"
+)
+
+maintainer=\
+(
+    'Pedro Gonçalves <pedro@lsts.pt>'
+)
+
+configure()
+{
+    mv "../iw_$version/etc" "../iw-$version/"
+    mv "../iw_$version/lib" "../iw-$version/"
+    mv "../iw_$version/sbin" "../iw-$version/"
+}
+
+target_install()
+{
+    $cmd_cp -r "etc/"* "$cfg_dir_rootfs/etc/"
+    $cmd_cp -r "sbin/"* "$cfg_dir_rootfs/sbin/"
+    $cmd_cp -r "lib/"* "$cfg_dir_rootfs/lib/"
+    $cmd_cp -r "$pkg_dir/fs/"* "$cfg_dir_rootfs/"
+}

rules/iw/fs/etc/check_wlan

@@ -0,0 +1,46 @@
+#!/bin/bash
+export PATH=/bin:/sbin:/usr/bin:/usr/sbin:/usr/bin:/bin
+
+############################# USER INPUT ###########################
+
+ip_dest=10.0.30.3
+
+####################################################################
+
+
+############### DON'T EDIT ##########################################
+
+check_interval=1
+log=/opt/.wifi.log
+wlan=wlan0
+eth=eth0
+
+exec 1> /dev/null
+exec 2>> $log
+echo $(date) > $log
+# without check_interval set, we risk a 0 sleep = busy loop
+if [ ! "$check_interval" ]; then
+        echo "No check interval set!" >> $log
+        exit 1
+fi
+
+startWifi () {
+   iw wlan0 connect LSTS >> $log
+}
+
+ifconfig $eth down
+ifconfig $wlan up
+
+while [ 1 ]; do
+        ping -q -c1 $ip_dest > /dev/null
+        if [ $? -ne 0 ]; then
+                echo $(date)" attempting restart..." >> $log
+                startWifi
+                sleep 1
+        else
+                echo "IS LINKED" >> $log
+                sleep $check_interval
+        fi
+done
+
+#####################################################################

rules/linux/rpi.bash

@@ -2,21 +2,19 @@
 
 version=\
 (
-    '3.18_2015-06-03'
+    '4.4_2017-01-27'
 )
 
 url=\
 (
-    "https://github.com/rasmartins/rpi-linux/archive/rpi-linux-$version.tar.gz"
+    "http://lsts.pt/glued/rpi-linux-$version.zip"
 )
 
 md5=\
 (
-    '0b0255e50ca358b619bb78653ac2db2e'
+    'f31d48a9d2c93509b35e750be489b44c'
 )
 
-post_unpack()
+build_dir="rpi-linux-rpi-linux-$version"
-{
+
-    rmdir "../linux-$version" &&
+find_patches
-        mv "../rpi-linux-rpi-linux-$version" "../linux-$version"
-}

rules/raspicam/default.bash

@@ -0,0 +1,54 @@
+version=\
+(
+    "1.0.0"
+)
+
+url=\
+(
+    "http://lsts.pt/glued/raspicam-$version.zip"
+)
+
+md5=\
+(
+  "169e62fd17d41455a42711a2f9c54fd1"
+)
+
+maintainer=\
+(
+    'Pedro Gonçalves <pedro@lsts.pt>'
+)
+
+configure()
+{
+    LINKER_ADDED_FLAGS="-Wl,-rpath,${cfg_dir_rootfs}/usr/lib"
+
+    ${cfg_dir_toolchain}/usr/local/bin/cmake \
+        -DCMAKE_SYSTEM_NAME="Linux" \
+        -DCMAKE_SYSTEM_VERSION="1" \
+        -DCMAKE_FIND_ROOT_PATH="${cfg_dir_toolchain_sysroot}/usr ${cfg_dir_rootfs}/usr" \
+        -DCMAKE_FIND_ROOT_PATH_MODE_INCLUDE=ONLY \
+        -DCMAKE_FIND_ROOT_PATH_MODE_LIBRARY=ONLY \
+        -DCMAKE_C_COMPILER="${cmd_target_cc}" \
+        -DCMAKE_CXX_COMPILER="${cmd_target_cxx}" \
+        -DCMAKE_C_FLAGS="${cfg_target_gcc_flags}" \
+	.
+}
+
+build()
+{
+    $cmd_make VERBOSE=1
+}
+
+host_install()
+{
+    cd build/
+    $cmd_cp -r "lib/"* "$cfg_dir_toolchain_sysroot/usr/lib/"
+    $cmd_cp -r "inc/"* "$cfg_dir_toolchain_sysroot/usr/include/"
+}
+
+target_install()
+{
+    cd build/
+    $cmd_cp -r "lib/"* "$cfg_dir_rootfs/usr/lib/"
+    $cmd_cp -r "bin/"* "$cfg_dir_rootfs/usr/bin/"
+}

rules/rpi-boot-firmware/default.bash

@@ -1,31 +1,29 @@
 version=\
 (
-    '2015-06-03'
+    '2017-02-02'
 )
 
 url=\
 (
-    "https://github.com/rasmartins/rpi-boot-firmware/archive/rpi-boot-firmware-$version.tar.gz"
+    "http://lsts.pt/glued/rpi-boot-firmware-$version.zip"
 )
 
 maintainer=\
 (
     'Ricardo Martins <rasm@fe.up.pt>'
+    'Pedro Gonçalves <pedro@lsts.pt>'
 )
 
 md5=\
 (
-    'a80ee36b66cccda4e9ccb7eb26bd6bb8'
+    'eb42664fce4d73f167064e697dfacb76'
 )
 
 target_install()
 {
-    $cmd_mkdir \
+    $cmd_mkdir "$cfg_dir_rootfs/boot"
-        "$cfg_dir_rootfs/boot" &&
 
-    for f in bootcode.bin fixup.dat start.elf; do
+    $cmd_cp "../$pkg-$version/"* "$cfg_dir_rootfs/boot/"
-        $cmd_cp -r "../$pkg-$pkg-$version/$f" "$cfg_dir_rootfs/boot"
-    done &&
 
     tar -C "$pkg_dir/fs" -c -f - . | tar -C "$cfg_dir_rootfs" -x -v -f -
 }

rules/rpi-boot-firmware/fs/boot/cmdline.txt

@@ -1 +1 @@
-dwc_otg.lpm_enable=0 console=ttyAMA0,115200,8n1 root=/dev/mmcblk0p2 elevator=deadline rootwait quiet
+dwc_otg.lpm_enable=0 console=tty1 root=/dev/mmcblk0p2 elevator=deadline rootwait quiet

rules/uv4l/default.bash

@@ -0,0 +1,45 @@
+version=\
+(
+  "1.0.0"
+)
+
+url=\
+(
+  "http://lsts.pt/glued/uv4l.$version.tar.bz2"
+)
+
+md5=\
+(
+  "869e884accbfa9c2356e2fd9307dd71c"
+)
+
+maintainer=\
+(
+    'Pedro Gonçalves <pedro@lsts.pt>'
+)
+
+post_unpack()
+{
+    mv "../etc" "../uv4l-$version/"
+    mv "../usr" "../uv4l-$version/"
+    touch startStreamRaspiCam.sh
+    echo "#!/bin/sh" >> startStreamRaspiCam.sh
+    echo "killall uv4l" >> startStreamRaspiCam.sh
+    echo "modprobe cuse" >> startStreamRaspiCam.sh
+    echo "uv4l -nopreview --auto-video_nr --driver raspicam --encoding h264 --width 1080 --height 720 --framerate 12 --quality 8 --server-option '--port=9090' --server-option '--max-queued-connections=30' --server-option '--max-streams=25' --server-option '--max-threads=29'" >> startStreamRaspiCam.sh
+}
+
+host_install()
+{
+  $cmd_cp -r "usr/lib/"*    "$cfg_dir_toolchain_sysroot/usr/lib/"
+  $cmd_cp -r "usr/include/"* "$cfg_dir_toolchain_sysroot/usr/include/"
+}
+
+target_install()
+{
+    $cmd_cp -r "usr/lib/"* "$cfg_dir_rootfs/usr/lib/"
+    $cmd_cp -r "usr/bin/"* "$cfg_dir_rootfs/usr/bin/"
+    $cmd_cp -r "startStreamRaspiCam.sh" "$cfg_dir_rootfs/usr/bin/"
+}
+
+

systems/lauv-aux-rpi/config

@@ -6,13 +6,12 @@ cfg_services1='lauv-storage-server'
 cfg_services2='dune'
 cfg_packages='dropbear rsync busybox e2fsprogs dosfstools ptpd rpcbind nfs-utils rpi-boot-firmware linux/rpi'
 cfg_target_linux_kernel='arch/arm/boot/zImage'
-cfg_target_linux_dtb='arch/arm/boot/dts/bcm2709-rpi-2-b.dtb'
 cfg_ptpd_interface='eth0'
 cfg_terminal='ttyAMA0'
 cfg_lauv_storage_dir='/opt/lsts/dune/log'
 cfg_partitions=\
 (
-    rpi-boot boot0  512B    32MiB
+    rpi-boot BOOT0  512B    32MiB
     root     root0  32MiB   544MiB
     data     data0  544MiB  -1
 )

systems/lauv-aux-rpi/fs/boot/config.txt

@@ -1 +1,9 @@
+# Core.
 arm_freq=1000
+
+# Disable BT on Rpi3.
+dtoverlay=pi3-disable-bt
+
+# Enable RasPicam
+start_x=1
+gpu_mem=128

systems/lauv-aux-rpi/lauv-aux-rpi-testbed.cfg

@@ -3,3 +3,4 @@ cfg_eth_ext_ip='10.0.200.24'
 cfg_eth_ext_mk='255.255.0.0'
 cfg_eth_ext_gw='10.0.0.1'
 cfg_ptpd_interface='eth0'
+cfg_services1=''

systems/lctr-b2xx/mariner-01.cfg

@@ -1,6 +0,0 @@
-cfg_hostname='mariner-01'
-cfg_storage='data0:ext4:/opt'
-cfg_eth_ext_ip='10.0.20.125'
-cfg_eth_ext_mk='255.255.0.0'
-cfg_eth_ext_gw='10.0.0.1'
-cfg_packages='u-boot dropbear rsync busybox e2fsprogs ptpd i2c-tools am33xx-cm3/host linux libav'

systems/lctr-rpi/config

@@ -5,14 +5,13 @@ cfg_services0='network dropbear storage upgrade syslog ptpd'
 cfg_services2='dune'
 cfg_packages='dropbear rsync busybox e2fsprogs dosfstools ptpd rpcbind rpi-boot-firmware linux/rpi'
 cfg_target_linux_kernel='arch/arm/boot/zImage'
-cfg_target_linux_dtb='arch/arm/boot/dts/bcm2709-rpi-2-b.dtb'
 cfg_ptpd_interface='eth0'
 cfg_eth_ext_mk='255.255.0.0'
 cfg_eth_ext_gw='10.0.0.1'
-cfg_terminal='ttyAMA0'
+cfg_terminal='tty1'
 cfg_partitions=\
 (
-    rpi-boot boot0  512B    32MiB
+    rpi-boot BOOT0  512B    32MiB
     root     root0  32MiB   544MiB
     data     data0  544MiB  -1
 )

systems/lctr-rpi/fs/boot/config.txt

@@ -1 +1,9 @@
+# Core.
 arm_freq=1000
+
+# Disable BT on Rpi3.
+dtoverlay=pi3-disable-bt
+
+# Enable RasPicam
+start_x=1
+gpu_mem=128

systems/lctr-rpi/fs/etc/inittab

@@ -0,0 +1,4 @@
+::sysinit:/sbin/services sysinit
+::restart:/sbin/init
+::respawn:-/usr/sbin/dropbear -F
+::shutdown:/sbin/services syshalt

systems/lctr-rpi/mariner-01.cfg

@@ -0,0 +1,4 @@
+cfg_hostname='mariner-01'
+cfg_eth_ext_ip='10.0.20.125'
+cfg_packages="$cfg_packages raspicam libjpeg-turbo v4l-utils uv4l libav"
+cfg_modules="$cfg_modules ftdi_sio"

systems/lctr-rpi/nest-1.cfg

@@ -1,4 +1,4 @@
 cfg_hostname='nest-1'
-cfg_eth_ext_ip='10.0.200.40'
+cfg_eth_ext_ip='10.0.35.1'
+cfg_services1='huawei'
 cfg_packages="$cfg_packages ppp iptables"
-

systems/lctr-rpi/test-rpi.cfg

@@ -0,0 +1,9 @@
+cfg_hostname='test-rpi'
+cfg_eth_ext_ip='10.0.200.52'
+cfg_services1=''
+cfg_packages='dropbear rsync busybox e2fsprogs dosfstools ptpd rpcbind rpi-boot-firmware linux/rpi raspicam libjpeg-turbo v4l-utils uv4l iw'
+cfg_services0='network-wlan dropbear storage upgrade syslog ptpd check_wlan'
+cfg_modules="$cfg_modules ftdi_sio rt73usb"
+cfg_terminal='tty1'
+cfg_ptpd_interface='wlan0'
+

systems/lctr-rpi/x2o-01.cfg

@@ -0,0 +1,4 @@
+cfg_hostname='x2o-01'
+cfg_eth_ext_ip='10.0.20.140'
+cfg_packages="$cfg_packages raspicam libjpeg-turbo v4l-utils uv4l libav"
+cfg_modules="$cfg_modules ftdi_sio"

systems/lctr-rpi/x2o-02.cfg

@@ -0,0 +1,4 @@
+cfg_hostname='x2o-02'
+cfg_eth_ext_ip='10.0.20.145'
+cfg_packages="$cfg_packages raspicam libjpeg-turbo v4l-utils uv4l libav"
+cfg_modules="$cfg_modules ftdi_sio"

systems/lctr-rpi/x8-08.cfg

@@ -0,0 +1,4 @@
+cfg_hostname='x8-08'
+cfg_eth_ext_ip='10.0.20.115'
+cfg_packages="$cfg_packages raspicam libjpeg-turbo v4l-utils uv4l libav"
+cfg_modules="$cfg_modules ftdi_sio"