systems: added preliminary support for Diamond Systems Aries SBC.

systems/lauv-atom/patches/linux/3.14/00-aim104-com8.patch

@@ -0,0 +1,85 @@
+diff -Nru a/drivers/tty/serial/8250/8250_aim104_com8.c b/drivers/tty/serial/8250/8250_aim104_com8.c
+--- a/drivers/tty/serial/8250/8250_aim104_com8.c	1970-01-01 01:00:00.000000000 +0100
++++ b/drivers/tty/serial/8250/8250_aim104_com8.c	2012-05-31 13:13:13.794585528 +0100
+@@ -0,0 +1,51 @@
++#include <linux/module.h>
++#include <linux/init.h>
++#include <linux/serial_8250.h>
++
++#define PORT(_base,_irq)				\
++	{						\
++		.iobase		= _base,		\
++		.irq		= _irq,			\
++		.uartclk	= 1843200,		\
++		.iotype		= UPIO_PORT,		\
++		.flags		= UPF_BOOT_AUTOCONF | UPF_BUGGY_UART,	\
++	}
++
++static struct plat_serial8250_port aim104_data[] = {
++	PORT(0x100, 10),
++	PORT(0x108, 10),
++	PORT(0x110, 10),
++	PORT(0x118, 10),
++	PORT(0x120, 10),
++	PORT(0x128, 10),
++	PORT(0x130, 10),
++	PORT(0x138, 10),
++	PORT(0x300, 6),
++	PORT(0x308, 6),
++	PORT(0x310, 6),
++	PORT(0x318, 6),
++	PORT(0x320, 6),
++	PORT(0x328, 6),
++	PORT(0x330, 6),
++	PORT(0x338, 6),
++	{ },
++};
++
++static struct platform_device exar_device = {
++	.name			= "serial8250",
++	.id			= PLAT8250_DEV_PLATFORM,
++	.dev			= {
++		.platform_data	= aim104_data,
++	},
++};
++
++static int __init exar_init(void)
++{
++	return platform_device_register(&exar_device);
++}
++
++module_init(exar_init);
++
++MODULE_AUTHOR("Ricardo Martins");
++MODULE_DESCRIPTION("8250 serial probe module for Eurotech AIM104-COM8");
++MODULE_LICENSE("GPL");
+diff -Nru a/drivers/tty/serial/8250/Kconfig b/drivers/tty/serial/8250/Kconfig
+--- a/drivers/tty/serial/8250/Kconfig	2012-05-21 19:42:51.000000000 +0100
++++ b/drivers/tty/serial/8250/Kconfig	2012-05-31 13:14:45.942587436 +0100
+@@ -202,6 +202,15 @@
+ 	  To compile this driver as a module, choose M here: the module
+ 	  will be called 8250_exar_st16c554.
+
++config SERIAL_8250_AIM104_COM8
++	tristate "Support Eurotech AIM104-COM8 Dual Quad UART"
++	depends on SERIAL_8250 != n && ISA && SERIAL_8250_MANY_PORTS
++	help
++	  Eurotech AIM104-COM8 Dual Quad UART.
++
++	  To compile this driver as a module, choose M here: the module
++	  will be called 8250_aim104_com8.
++
+ config SERIAL_8250_HUB6
+ 	tristate "Support Hub6 cards"
+ 	depends on SERIAL_8250 != n && ISA && SERIAL_8250_MANY_PORTS
+diff -Nru a/drivers/tty/serial/8250/Makefile b/drivers/tty/serial/8250/Makefile
+--- a/drivers/tty/serial/8250/Makefile	2012-05-21 19:42:51.000000000 +0100
++++ b/drivers/tty/serial/8250/Makefile	2012-05-31 13:15:15.366347016 +0100
+@@ -14,6 +14,7 @@
+ obj-$(CONFIG_SERIAL_8250_ACCENT)	+= 8250_accent.o
+ obj-$(CONFIG_SERIAL_8250_BOCA)		+= 8250_boca.o
+ obj-$(CONFIG_SERIAL_8250_EXAR_ST16C554)	+= 8250_exar_st16c554.o
++obj-$(CONFIG_SERIAL_8250_AIM104_COM8)	+= 8250_aim104_com8.o
+ obj-$(CONFIG_SERIAL_8250_HUB6)		+= 8250_hub6.o
+ obj-$(CONFIG_SERIAL_8250_MCA)		+= 8250_mca.o
+ obj-$(CONFIG_SERIAL_8250_FSL)		+= 8250_fsl.o