diff -Nru a/drivers/tty/serial/8250/8250_aim104_com8.c b/drivers/tty/serial/8250/8250_aim104_com8.c
--- a/drivers/tty/serial/8250/8250_aim104_com8.c	1970-01-01 01:00:00.000000000 +0100
+++ b/drivers/tty/serial/8250/8250_aim104_com8.c	2012-05-31 13:13:13.794585528 +0100
@@ -0,0 +1,51 @@
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/serial_8250.h>
+
+#define PORT(_base,_irq)				\
+	{						\
+		.iobase		= _base,		\
+		.irq		= _irq,			\
+		.uartclk	= 1843200,		\
+		.iotype		= UPIO_PORT,		\
+		.flags		= UPF_BOOT_AUTOCONF | UPF_BUGGY_UART,	\
+	}
+
+static struct plat_serial8250_port aim104_data[] = {
+	PORT(0x100, 10),
+	PORT(0x108, 10),
+	PORT(0x110, 10),
+	PORT(0x118, 10),
+	PORT(0x120, 10),
+	PORT(0x128, 10),
+	PORT(0x130, 10),
+	PORT(0x138, 10),
+	PORT(0x300, 6),
+	PORT(0x308, 6),
+	PORT(0x310, 6),
+	PORT(0x318, 6),
+	PORT(0x320, 6),
+	PORT(0x328, 6),
+	PORT(0x330, 6),
+	PORT(0x338, 6),
+	{ },
+};
+
+static struct platform_device exar_device = {
+	.name			= "serial8250",
+	.id			= PLAT8250_DEV_PLATFORM,
+	.dev			= {
+		.platform_data	= aim104_data,
+	},
+};
+
+static int __init exar_init(void)
+{
+	return platform_device_register(&exar_device);
+}
+
+module_init(exar_init);
+
+MODULE_AUTHOR("Ricardo Martins");
+MODULE_DESCRIPTION("8250 serial probe module for Eurotech AIM104-COM8");
+MODULE_LICENSE("GPL");
diff -Nru a/drivers/tty/serial/8250/Kconfig b/drivers/tty/serial/8250/Kconfig
--- a/drivers/tty/serial/8250/Kconfig	2012-05-21 19:42:51.000000000 +0100
+++ b/drivers/tty/serial/8250/Kconfig	2012-05-31 13:14:45.942587436 +0100
@@ -202,6 +202,15 @@
 	  To compile this driver as a module, choose M here: the module
 	  will be called 8250_exar_st16c554.

+config SERIAL_8250_AIM104_COM8
+	tristate "Support Eurotech AIM104-COM8 Dual Quad UART"
+	depends on SERIAL_8250 != n && ISA && SERIAL_8250_MANY_PORTS
+	help
+	  Eurotech AIM104-COM8 Dual Quad UART.
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called 8250_aim104_com8.
+
 config SERIAL_8250_HUB6
 	tristate "Support Hub6 cards"
 	depends on SERIAL_8250 != n && ISA && SERIAL_8250_MANY_PORTS
diff -Nru a/drivers/tty/serial/8250/Makefile b/drivers/tty/serial/8250/Makefile
--- a/drivers/tty/serial/8250/Makefile	2012-05-21 19:42:51.000000000 +0100
+++ b/drivers/tty/serial/8250/Makefile	2012-05-31 13:15:15.366347016 +0100
@@ -14,6 +14,7 @@
 obj-$(CONFIG_SERIAL_8250_ACCENT)	+= 8250_accent.o
 obj-$(CONFIG_SERIAL_8250_BOCA)		+= 8250_boca.o
 obj-$(CONFIG_SERIAL_8250_EXAR_ST16C554)	+= 8250_exar_st16c554.o
+obj-$(CONFIG_SERIAL_8250_AIM104_COM8)	+= 8250_aim104_com8.o
 obj-$(CONFIG_SERIAL_8250_HUB6)		+= 8250_hub6.o
 obj-$(CONFIG_SERIAL_8250_MCA)		+= 8250_mca.o
 obj-$(CONFIG_SERIAL_8250_FSL)		+= 8250_fsl.o