This repository has been archived on 2023-08-20. You can view files and clone it, but cannot push or open issues or pull requests.
symfony/src/Symfony/Component/DependencyInjection/Configuration/Builder/NormalizationBuilder.php

77 lines
2.0 KiB
PHP
Raw Normal View History

[Security/DependencyInjection] adds support for merging security configurations The merging is done in three steps: 1. Normalization: ================= All passed config arrays will be transformed into the same structure regardless of what format they come from. 2. Merging: =========== This is the step when the actual merging is performed. Starting at the root the configs will be passed along the tree until a node has no children, or the merging of sub-paths of the current node has been specifically disabled. Left-Side Right-Side Merge Result ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ -nothing- array Right-Side will be taken. scalar scalar Right-Side will be taken. array false Right-Side will be taken if ->canBeUnset() was called on the array node. false array Right-Side will be taken. array array Each value in the array will be passed to the specific child node, or the prototype node (whatever is present). 3. Finalization: ================ The normalized, and merged config will be passed through the config tree to perform final validation on the submitted values, and set default values where this has been requested. You can influence this process in various ways, here is a list with some examples. All of these methods must be called on the node on which they should be applied. * isRequired(): Node must be present in at least one config file. * requiresAtLeastOneElement(): PrototypeNode must have at least one element. * treatNullLike($value): Replaces null with $value during normalization. * treatTrueLike($value): Same as above just for true * treatFalseLike($value): Same as above just for false * defaultValue($value): Sets a default value for this node (only for scalars) * addDefaultsIfNotSet(): Whether to add default values of an array which has not been defined in any configuration file. * disallowNewKeysInSubsequentConfigs(): All keys for this array must be defined in one configuration file, subsequent configurations may only overwrite these. * fixXmlConfig($key, $plural = null): Transforms XML config into same structure as YAML, and PHP configurations. * useAttributeAsKey($name): Defines which XML attribute to use as array key. * cannotBeOverwritten(): Declares a certain sub-path as non-overwritable. All configuration for this path must be defined in the same configuration file. * cannotBeEmpty(): If value is set, it must be non-empty. * canBeUnset(): If array values should be unset if false is specified. Architecture: ============= The configuration consists basically out of two different sets of classes. 1. Builder classes: These classes provide the fluent interface and are used to construct the config tree. 2. Node classes: These classes contain the actual logic for normalization, merging, and finalizing configurations. After you have added all the metadata to your builders, the call to ->buildTree() will convert this metadata to actual node classes. Most of the time, you will not have to interact with the config nodes directly, but will delegate this to the Processor class which will call the respective methods on the config node classes.
2011-02-04 13:37:01 +00:00
<?php
/*
* This file is part of the Symfony package.
*
* (c) Fabien Potencier <fabien.potencier@symfony-project.com>
*
* For the full copyright and license information, please view the LICENSE
* file that was distributed with this source code.
*/
[Security/DependencyInjection] adds support for merging security configurations The merging is done in three steps: 1. Normalization: ================= All passed config arrays will be transformed into the same structure regardless of what format they come from. 2. Merging: =========== This is the step when the actual merging is performed. Starting at the root the configs will be passed along the tree until a node has no children, or the merging of sub-paths of the current node has been specifically disabled. Left-Side Right-Side Merge Result ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ -nothing- array Right-Side will be taken. scalar scalar Right-Side will be taken. array false Right-Side will be taken if ->canBeUnset() was called on the array node. false array Right-Side will be taken. array array Each value in the array will be passed to the specific child node, or the prototype node (whatever is present). 3. Finalization: ================ The normalized, and merged config will be passed through the config tree to perform final validation on the submitted values, and set default values where this has been requested. You can influence this process in various ways, here is a list with some examples. All of these methods must be called on the node on which they should be applied. * isRequired(): Node must be present in at least one config file. * requiresAtLeastOneElement(): PrototypeNode must have at least one element. * treatNullLike($value): Replaces null with $value during normalization. * treatTrueLike($value): Same as above just for true * treatFalseLike($value): Same as above just for false * defaultValue($value): Sets a default value for this node (only for scalars) * addDefaultsIfNotSet(): Whether to add default values of an array which has not been defined in any configuration file. * disallowNewKeysInSubsequentConfigs(): All keys for this array must be defined in one configuration file, subsequent configurations may only overwrite these. * fixXmlConfig($key, $plural = null): Transforms XML config into same structure as YAML, and PHP configurations. * useAttributeAsKey($name): Defines which XML attribute to use as array key. * cannotBeOverwritten(): Declares a certain sub-path as non-overwritable. All configuration for this path must be defined in the same configuration file. * cannotBeEmpty(): If value is set, it must be non-empty. * canBeUnset(): If array values should be unset if false is specified. Architecture: ============= The configuration consists basically out of two different sets of classes. 1. Builder classes: These classes provide the fluent interface and are used to construct the config tree. 2. Node classes: These classes contain the actual logic for normalization, merging, and finalizing configurations. After you have added all the metadata to your builders, the call to ->buildTree() will convert this metadata to actual node classes. Most of the time, you will not have to interact with the config nodes directly, but will delegate this to the Processor class which will call the respective methods on the config node classes.
2011-02-04 13:37:01 +00:00
namespace Symfony\Component\DependencyInjection\Configuration\Builder;
/**
* This class builds normalization conditions.
*
* @author Johannes M. Schmitt <schmittjoh@gmail.com>
*/
class NormalizationBuilder
{
public $parent;
public $before;
public $remappings;
/**
* Constructor
*
* @param Symfony\Component\DependencyInjection\Configuration\Builder\NodeBuilder $parent
*/
[Security/DependencyInjection] adds support for merging security configurations The merging is done in three steps: 1. Normalization: ================= All passed config arrays will be transformed into the same structure regardless of what format they come from. 2. Merging: =========== This is the step when the actual merging is performed. Starting at the root the configs will be passed along the tree until a node has no children, or the merging of sub-paths of the current node has been specifically disabled. Left-Side Right-Side Merge Result ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ -nothing- array Right-Side will be taken. scalar scalar Right-Side will be taken. array false Right-Side will be taken if ->canBeUnset() was called on the array node. false array Right-Side will be taken. array array Each value in the array will be passed to the specific child node, or the prototype node (whatever is present). 3. Finalization: ================ The normalized, and merged config will be passed through the config tree to perform final validation on the submitted values, and set default values where this has been requested. You can influence this process in various ways, here is a list with some examples. All of these methods must be called on the node on which they should be applied. * isRequired(): Node must be present in at least one config file. * requiresAtLeastOneElement(): PrototypeNode must have at least one element. * treatNullLike($value): Replaces null with $value during normalization. * treatTrueLike($value): Same as above just for true * treatFalseLike($value): Same as above just for false * defaultValue($value): Sets a default value for this node (only for scalars) * addDefaultsIfNotSet(): Whether to add default values of an array which has not been defined in any configuration file. * disallowNewKeysInSubsequentConfigs(): All keys for this array must be defined in one configuration file, subsequent configurations may only overwrite these. * fixXmlConfig($key, $plural = null): Transforms XML config into same structure as YAML, and PHP configurations. * useAttributeAsKey($name): Defines which XML attribute to use as array key. * cannotBeOverwritten(): Declares a certain sub-path as non-overwritable. All configuration for this path must be defined in the same configuration file. * cannotBeEmpty(): If value is set, it must be non-empty. * canBeUnset(): If array values should be unset if false is specified. Architecture: ============= The configuration consists basically out of two different sets of classes. 1. Builder classes: These classes provide the fluent interface and are used to construct the config tree. 2. Node classes: These classes contain the actual logic for normalization, merging, and finalizing configurations. After you have added all the metadata to your builders, the call to ->buildTree() will convert this metadata to actual node classes. Most of the time, you will not have to interact with the config nodes directly, but will delegate this to the Processor class which will call the respective methods on the config node classes.
2011-02-04 13:37:01 +00:00
public function __construct($parent)
{
$this->parent = $parent;
$this->keys = false;
$this->remappings =
$this->before =
$this->after = array();
}
/**
* Registers a key to remap to its plural form.
*
* @param string $key The key to remap
* @param string $plural The plural of the key in case of irregular plural
*
* @return Symfony\Component\DependencyInjection\Configuration\Builder\NormalizationBuilder
*/
[Security/DependencyInjection] adds support for merging security configurations The merging is done in three steps: 1. Normalization: ================= All passed config arrays will be transformed into the same structure regardless of what format they come from. 2. Merging: =========== This is the step when the actual merging is performed. Starting at the root the configs will be passed along the tree until a node has no children, or the merging of sub-paths of the current node has been specifically disabled. Left-Side Right-Side Merge Result ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ -nothing- array Right-Side will be taken. scalar scalar Right-Side will be taken. array false Right-Side will be taken if ->canBeUnset() was called on the array node. false array Right-Side will be taken. array array Each value in the array will be passed to the specific child node, or the prototype node (whatever is present). 3. Finalization: ================ The normalized, and merged config will be passed through the config tree to perform final validation on the submitted values, and set default values where this has been requested. You can influence this process in various ways, here is a list with some examples. All of these methods must be called on the node on which they should be applied. * isRequired(): Node must be present in at least one config file. * requiresAtLeastOneElement(): PrototypeNode must have at least one element. * treatNullLike($value): Replaces null with $value during normalization. * treatTrueLike($value): Same as above just for true * treatFalseLike($value): Same as above just for false * defaultValue($value): Sets a default value for this node (only for scalars) * addDefaultsIfNotSet(): Whether to add default values of an array which has not been defined in any configuration file. * disallowNewKeysInSubsequentConfigs(): All keys for this array must be defined in one configuration file, subsequent configurations may only overwrite these. * fixXmlConfig($key, $plural = null): Transforms XML config into same structure as YAML, and PHP configurations. * useAttributeAsKey($name): Defines which XML attribute to use as array key. * cannotBeOverwritten(): Declares a certain sub-path as non-overwritable. All configuration for this path must be defined in the same configuration file. * cannotBeEmpty(): If value is set, it must be non-empty. * canBeUnset(): If array values should be unset if false is specified. Architecture: ============= The configuration consists basically out of two different sets of classes. 1. Builder classes: These classes provide the fluent interface and are used to construct the config tree. 2. Node classes: These classes contain the actual logic for normalization, merging, and finalizing configurations. After you have added all the metadata to your builders, the call to ->buildTree() will convert this metadata to actual node classes. Most of the time, you will not have to interact with the config nodes directly, but will delegate this to the Processor class which will call the respective methods on the config node classes.
2011-02-04 13:37:01 +00:00
public function remap($key, $plural = null)
{
if (null === $plural) {
$plural = $key.'s';
}
$this->remappings[] = array($key, $plural);
return $this;
}
/**
* Registers a closure to run before the normalization or an expression builder to build it if null is provided.
*
* @param \Closure $closure
*
* @return Symfony\Component\DependencyInjection\Configuration\Builder\ExprBuilder|Symfony\Component\DependencyInjection\Configuration\Builder\NormalizationBuilder
*/
[Security/DependencyInjection] adds support for merging security configurations The merging is done in three steps: 1. Normalization: ================= All passed config arrays will be transformed into the same structure regardless of what format they come from. 2. Merging: =========== This is the step when the actual merging is performed. Starting at the root the configs will be passed along the tree until a node has no children, or the merging of sub-paths of the current node has been specifically disabled. Left-Side Right-Side Merge Result ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ -nothing- array Right-Side will be taken. scalar scalar Right-Side will be taken. array false Right-Side will be taken if ->canBeUnset() was called on the array node. false array Right-Side will be taken. array array Each value in the array will be passed to the specific child node, or the prototype node (whatever is present). 3. Finalization: ================ The normalized, and merged config will be passed through the config tree to perform final validation on the submitted values, and set default values where this has been requested. You can influence this process in various ways, here is a list with some examples. All of these methods must be called on the node on which they should be applied. * isRequired(): Node must be present in at least one config file. * requiresAtLeastOneElement(): PrototypeNode must have at least one element. * treatNullLike($value): Replaces null with $value during normalization. * treatTrueLike($value): Same as above just for true * treatFalseLike($value): Same as above just for false * defaultValue($value): Sets a default value for this node (only for scalars) * addDefaultsIfNotSet(): Whether to add default values of an array which has not been defined in any configuration file. * disallowNewKeysInSubsequentConfigs(): All keys for this array must be defined in one configuration file, subsequent configurations may only overwrite these. * fixXmlConfig($key, $plural = null): Transforms XML config into same structure as YAML, and PHP configurations. * useAttributeAsKey($name): Defines which XML attribute to use as array key. * cannotBeOverwritten(): Declares a certain sub-path as non-overwritable. All configuration for this path must be defined in the same configuration file. * cannotBeEmpty(): If value is set, it must be non-empty. * canBeUnset(): If array values should be unset if false is specified. Architecture: ============= The configuration consists basically out of two different sets of classes. 1. Builder classes: These classes provide the fluent interface and are used to construct the config tree. 2. Node classes: These classes contain the actual logic for normalization, merging, and finalizing configurations. After you have added all the metadata to your builders, the call to ->buildTree() will convert this metadata to actual node classes. Most of the time, you will not have to interact with the config nodes directly, but will delegate this to the Processor class which will call the respective methods on the config node classes.
2011-02-04 13:37:01 +00:00
public function before(\Closure $closure = null)
{
if (null !== $closure) {
$this->before[] = $closure;
return $this;
}
return $this->before[] = new ExprBuilder($this->parent);
}
}