Commits
-------
159fc0e [Validator] Added symbols to IDNs validation
c827faf [Validator] Add support for IDNs and custom TLDs
Discussion
----------
[Validator] Add support for IDNs and custom TLDs
Minor changes to allow for IDNs and [custom TLDs](http://news.softpedia.com/news/ICANN-Approves-New-Custom-Generic-Top-Level-Domains-Like-google-bank-206977.shtml). This is the only sane way to support everything in a timeless manner.
---------------------------------------------------------------------------
by stealth35 at 2011/06/20 04:32:09 -0700
maybe it should be check the host with idn_to_ascii (if function exists, maybe it's should recreate un punycode en/decoder in the stub)
---------------------------------------------------------------------------
by mvrhov at 2011/06/20 04:40:10 -0700
/me :faceslap.
Haven't seen the link in PR
---------------------------------------------------------------------------
by Seldaek at 2011/06/20 04:40:40 -0700
@mvrhov: Yup, that's what pushed me to reconsider adding this.
@stealth35: I'm not sure if this is needed. I don't want this to be too strict, with another validator or with an extra option I think we can make a check that the domain actually exists, or do a GET / on it or something, but this just checks validity of the syntax.
---------------------------------------------------------------------------
by stealth35 at 2011/06/20 04:48:05 -0700
I understand :)
what about funny IDN like : [☎.com] (http://xn--y3h.com/) ?
---------------------------------------------------------------------------
by Seldaek at 2011/06/20 04:53:19 -0700
@stealth35: Fixed
---------------------------------------------------------------------------
by stealth35 at 2011/06/20 04:56:18 -0700
it's seem great,for acceptable chars [RFC] (http://www.faqs.org/rfcs/rfc3490.html) said (with UseSTD3ASCIIRules option) :
(a) Verify the absence of non-LDH ASCII code points; that is, the
absence of 0..2C, 2E..2F, 3A..40, 5B..60, and 7B..7F.
Commits
-------
72d0ebe9 [WebProfilerBundle] Added the support of the the logging context in the template
410b3e0 [HttpKernel] Added the context in the LoggerInterface
Discussion
----------
context in the LoggerInterface
This adds the context in the LoggerInterface. The change is totally BC for people using the logger. However this affects people implementing the interface.
Note that this require Seldaek/monolog#33 for the implementation
---------------------------------------------------------------------------
by Seldaek at 2011/06/17 04:24:18 -0700
@fabpot: just ping me when you are merging this one, so I can merge in monolog and we avoid out-of-sync issues.
---------------------------------------------------------------------------
by stof at 2011/06/17 04:49:05 -0700
@Seldaek you can merge in Monolog when you want. Monolog is BC so merging it before the PR in Symfony2 does not break things.
---------------------------------------------------------------------------
by Seldaek at 2011/06/17 05:08:34 -0700
Ah right, I thought the interfaces wouldn't match, but PHP allows extra args it seems so I'll merge right now.
---------------------------------------------------------------------------
by stof at 2011/06/17 05:32:58 -0700
PHP allows extra *optionnal* args and it is the case here :)
---------------------------------------------------------------------------
by Seldaek at 2011/06/17 05:35:00 -0700
Well yes otherwise you break the interface. Anyway it's merged so @fabpot, anytime :)
Commits
-------
edf4b87 Add missing "tearDown" functions, and some missing variable declaration (this saves for me almost 20MB when run all tests) Force AsseticBundle tests to use TestCase Fix test for DoctrineBundle to use TestCase
2b0c352 Increase code coverage for: YamlParser, Validators, PhpEngine + Helpers, HttpFoundation
b88a0a0 Remove tabs
99f9337 Additional tests for PhpEngine + Helpers More tests for UrlValidator
450ed85 Additional tests for DateTimeValidator, EmailValidator and UrlValidator
Discussion
----------
[Tests] Cleanup + make code coverage more happy
Hey,
this PR is a bit bigger than usually ;-) few infos what's inside:
- Fix `DoctrineBundle` test to use `TestCase`
- Mark tests as "incomplete" instead of commenting them out
- Increase code coverage for: `Validators`, `PhpEngine` + `Helpers`, `HttpFoundation` (`Session`, `Response` etc.)
- And my favourite ;-) added missing variables definition (also removed non-used) and `tearDown()` function (if needed) to tests which allowed me saved __~15MB__ when running all tests
---------------------------------------------------------------------------
by stloyd at 2011/06/16 05:58:21 -0700
@fabpot & @marcw It was rebased and cleanup up (I split up `AsseticBundle` symfony/AsseticBundle#1 change to new repo), and added few new tests.
Commits
-------
6436da2 added quote
7dc4e24 [Tests][Locale] locale supported INTL_ICU_VERSION, use ReflectionExtension to find ICU version
Discussion
----------
[Tests][Locale] locale supported INTL_ICU_VERSION, use ReflectionExtension to find ICU version
---------------------------------------------------------------------------
by igorw at 2011/06/16 03:44:25 -0700
Nice.
`INTL_ICU_VERSION` is PHP 5.4 only, right?
Also, it may be possible to use:
$output = \ReflectionExtension::export('intl', true);
That way we can get rid of the output buffering.
---------------------------------------------------------------------------
by stloyd at 2011/06/16 03:49:22 -0700
@igorw It will be added in PHP 5.3.7 to.
---------------------------------------------------------------------------
by stealth35 at 2011/06/16 04:04:09 -0700
@igorw no export don't return the info table
Commits
-------
72c074a [Session] Used \Locale::setDefault() when the locale is setted
Discussion
----------
[Session] Used \Locale::setDefault() when the locale is setted
For `DateType` in form component (by example), `\Locale::getDefault()` is used to displayed the name of months.
If `\Locale` class is not used when the locale is setted in the session, the name of months is not in a good language.
This PR solves this problem.
---------------------------------------------------------------------------
by pborreli at 2011/05/29 09:13:44 -0700
what if user doesn't have intl extension ?
---------------------------------------------------------------------------
by stof at 2011/05/29 09:24:04 -0700
You should wrap the calls to ``\Locale::setDefault`` in a ``class_exist`` check to avoid issue when using the stub implementation (for which calling ``setDefault`` is forbidden).
---------------------------------------------------------------------------
by francisbesset at 2011/05/29 09:26:40 -0700
@pborreli: Symfony have a fake Locale class and this class is used only if the server haven't intl enabled.
---------------------------------------------------------------------------
by stof at 2011/05/29 09:33:16 -0700
@francisbesset Yeah, but ``setDefault`` throw a ``BadMethodCall`` exception.
and so the check has to use ``extension_loaded`` instead of ``class_exists``.
---------------------------------------------------------------------------
by fabpot at 2011/06/13 10:12:15 -0700
Ticket #1121 is related to this PR.
---------------------------------------------------------------------------
by fabpot at 2011/06/15 06:18:28 -0700
I have just tried another implementation where the locale is passed as an argument to the built-in types and some data transformers (via a `LocaleAwareInterface` interface). That works fine as forms are immutable now, but the solution is obviously more "complex" as we need to pass the locale to many different classes. Also, using `Locale::setDefault()` has an advantage over my method: you can change the locale whenever you want within a PHP process (which can be useful even if this is an edge case). Last, but not the least, if make sense to update the PHP Locale to the user locale.
So, to sum up, this patch is probably the best solution (easy and flexible enough).
Commits
-------
e8326aa Renamed attributes to attr to be consistent with templating.
c707467 Added support for additional attributes in Form types that list field as their parent.
Discussion
----------
[Form] Added support for additional attributes
Added support for additional attributes in Form types that list field as their parent.
This is needed particularity for html5 data and data- attributes support, unfortunately $options['data'] is already taken, so adding a general $options['attributes'] is the easiest solution without breaking BC.
Now I know that this will be tempting for some to stuck style and class attributes here also, but I'd rather not restrict the keys that are passed in.
---------------------------------------------------------------------------
by Seldaek at 2011/05/22 14:51:02 -0700
Maybe it should be called attr for consistency with the template stuff, or the other should be renamed attributes. Other than that, I'm +1, data-* attributes are awesome, and abusers will find ways to abuse things either way.
---------------------------------------------------------------------------
by mvrhov at 2011/05/22 21:48:01 -0700
Naming it attr also crossed my mind when I was signing off yesterday.
Along with the possibility to go the way xml attributes are handled when node is converted to/from array.
So every option with @ prefix would automatically become html attribute. However going the latter path, it'd be harder to implement.
---------------------------------------------------------------------------
by fabpot at 2011/06/13 07:43:52 -0700
Can you give an example of a real-world use case? Thanks.
---------------------------------------------------------------------------
by Seldaek at 2011/06/13 07:54:51 -0700
You can use `array('attr' => array('data-foo' => 'bar'))`, which will output `data-foo="bar"`, which can be read easily by jQuery for example as `$('el').data('foo')`. It's a standard compliant and elegant way to pass extra data needed by the JS code along with DOM nodes, without polluting everything with script tags and all.
---------------------------------------------------------------------------
by fabpot at 2011/06/13 08:01:08 -0700
@Seldaek: I understand that. But why not doing this in the template?
---------------------------------------------------------------------------
by Seldaek at 2011/06/13 08:04:10 -0700
Well, I agree it most likely belongs in the template, but it's kind of data stuff that is not directly impacting the display rules of the element, so in some cases having the possibility to set that from the php code might be useful. Anyway I'll let @mvrhov answer maybe he had a more concrete use case. I just think it's nice to leave the door open, but I don't really need it.
---------------------------------------------------------------------------
by mvrhov at 2011/06/13 10:27:03 -0700
A bit late to the party. Ok, here is my use-case.
I have a pretty large form where part of the data is of tabular form. The number of rows is almost every time a lot larger than the number of columns
So I can either output a lot of text inputs filled with data and make already a large form intimidating. Or I can use a grid that supports editing. So I serialize that tabular data as json and put it as a value into one hidden field. Somehow I also have to get the column definitions to that grid. I decided to I serialize it and put it inside data-* attribute. Putting it into another hidden field doesn't make sense as when data is submitted back I don't need the column definitions as only the number of rows changes.
---------------------------------------------------------------------------
by fabpot at 2011/06/13 10:44:58 -0700
@mvrhov: ok, but what prevents you from doing this in the template directly?
---------------------------------------------------------------------------
by mvrhov at 2011/06/13 11:22:53 -0700
I have to get it into the view somehow. What I'd really not like to do is, iterate through that data in a controller and then pass it as another template variable.
---------------------------------------------------------------------------
by fabpot at 2011/06/14 00:10:22 -0700
But the controller is where you prepare the data that you want to send to the view. Without any concrete example, I'm going to close this PR.
---------------------------------------------------------------------------
by mvrhov at 2011/06/14 01:21:10 -0700
IMHO this has to go out through form as this is the part of the form also I do have a very slim controllers in this case 10 LOC, where half of them is just setting up an view data..
Nonetheless I went looking again very closely at the AbstractType and I do have buildView function available which I can override and set the column data I need there, and then provide custom view for that, so at least from this part this is an non issue.
With this PR all default form attributes can be set from outside and when searching for a good use-case I have found out that @henrikbjorn has implemented this via extensions [1], maybe he has a good use-case for this.
[1] - https://github.com/Comways/ComwaysFormExtraBundle/blob/master/Form/Extension/FieldTypeExtension.php
---------------------------------------------------------------------------
by henrikbjorn at 2011/06/14 01:48:53 -0700
Convenience is the only use case
---------------------------------------------------------------------------
by stof at 2011/06/14 02:08:09 -0700
@fabpot The issue is that passing it from the controller as another template variable makes it really hard when you use the type twice with different values. Passing them from the form would be the easiest way
---------------------------------------------------------------------------
by shuogawa at 2011/06/14 19:37:50 -0700
hello. thanks for great form library.
I want to support two ways to display additional attributes for form elements.
1) control in template like
{{ form_row(form.name, { 'width': '30' }) }}
2) control from php
$builder->add('name', 'text', array('attr'=>array('width'=>'30')));
If form elements configure by end user like cms,
and form elements dynamically change.
The second method is useful.
template designer can write {{form_row(form)}}
but
template designer can not write {{form_row(form.name), { 'width': '30' }}}
Thank you
---------------------------------------------------------------------------
by fabpot at 2011/06/14 23:01:18 -0700
@shuogawa: That's what I fear. Setting the `width` or any other attribute in PHP is wrong. This belongs to the templates.
---------------------------------------------------------------------------
by stloyd at 2011/06/15 00:09:05 -0700
@fabpot Then maybe just restrict allowed tags to `data-*` and don't use `attr` but some other not confusing name ? Just like we do with i.e. `maxlength`.
---------------------------------------------------------------------------
by fabpot at 2011/06/15 04:44:25 -0700
I'm going to merge it as a "convenience" tool, but the documentation should clearly state that the only usage should be for `data-*` attributes.
Commits
-------
07fa82d [Form] Revert changes impacting perfomance and readability
b709551 [Order] Make Form::types and FormView::types use the same order (Parent > Child)
e56dad6 [Form] simplify the code
bdd755e [Form] Fix the exception message when no block is found
c68c511 [Form] Make theming form prototypes consistent (start by looking for a '_<id>_<section>' block)
9ec9960 [Form] Simplify the code
4e3e276 [Form] Make the prototype view child of the collection view
Discussion
----------
[Form] Make the prototype view child of the collection view
This PR should be a base for discussion.
The [current implementation](https://github.com/symfony/symfony/pull/1188) has some drawbacks because the prototype view is not a child of the collection view:
* The 'multipart' attribute is not propagated from the prototype to the collection,
* The prototype view do not use the theme from the collection.
Those 2 points are fixed by the proposed implementation and one more benefit is that the template markup might be easier to work with:
before:
```html
<div id="form_emails">
<div>
<label for="form_emails_0">0</label>
<input type="email" id="form_emails_0" name="form[emails][0]" value="a@b.com">
</div>
<script type="text/html" id="form_emails_prototype">
<div>
<label for="$$name$$">$$name$$</label>
<input type="email" id="$$name$$" name="$$name$$" value="" />
</div>
</script>
</div>
```
after:
```html
<div id="form_emails">
<div>
<label for="form_emails_0">0</label>
<input type="email" id="form_emails_0" name="form[emails][0]" value="a@b.com">
</div>
<script type="text/html" id="form_emails_prototype">
<div>
<label for="form_emails_$$name$$">$$name$$</label>
<input type="email" id="form_emails_$$name$$" name="form[emails][$$name$$]" value="" />
</div>
</script>
</div>
```
@kriswallsmith I'd like to get your feedback on this PR. thanks.
---------------------------------------------------------------------------
by stof at 2011/06/14 07:01:01 -0700
@fabpot any ETA about merging it ? Using the prototype currently is a pain to build the name. The change makes it far easier
---------------------------------------------------------------------------
by fabpot at 2011/06/14 07:09:46 -0700
The templates are much better but I'm a bit concerned that we need to add the logic into the Form class directly. That looks quite ugly. If there is no other way, I will merge it.
---------------------------------------------------------------------------
by vicb at 2011/06/14 07:14:32 -0700
I have found no better way... I am testing some minor tweaks I want to submit.
---------------------------------------------------------------------------
by kriswallsmith at 2011/06/14 07:34:25 -0700
I'm not happy with the code in Form.php either... would creating a PrototypeType accomplish the same thing?
---------------------------------------------------------------------------
by vicb at 2011/06/14 07:42:07 -0700
@kriswallsmith tried and dismissed, the id and name are bad & you have to go for `render_widget(form.get('proto'))` in the template. That should be fixeable but not any better.
---------------------------------------------------------------------------
by kriswallsmith at 2011/06/14 07:45:21 -0700
What do you mean the id and name are bad? If we have a distinct type for the prototype, can't we do whatever we want using buildView() and the template?
---------------------------------------------------------------------------
by vicb at 2011/06/14 07:53:31 -0700
@kriswallsmith the id would be smthg like `form_emails_$$name$$_prototype` but yes we should be able to do whatever we want but the code might end up being more complex.
I am done with the tweaks but still open to feedback on this PR.
---------------------------------------------------------------------------
by kriswallsmith at 2011/06/14 08:08:21 -0700
Yes, that is the type of name I would expect.
---------------------------------------------------------------------------
by kriswallsmith at 2011/06/14 08:08:33 -0700
Oops -- I mean id.
---------------------------------------------------------------------------
by kriswallsmith at 2011/06/14 08:09:42 -0700
Maybe I'm confused what id you're referring to. I'll try to spend some time on this today.
---------------------------------------------------------------------------
by vicb at 2011/06/14 08:23:56 -0700
That should be the id of the `<input>`, the id of the script would be `form_emails_$$name$$_prototype_prototype` (if prototype is the name of the nested node).
I am trying to setup a branch with my code (playing with git & netbeans local history)
---------------------------------------------------------------------------
by vicb at 2011/06/14 08:46:25 -0700
@kriswallsmith https://github.com/vicb/symfony/tree/kris/proto if that can help (there are still changes in Form.php)
---------------------------------------------------------------------------
by kriswallsmith at 2011/06/14 08:47:08 -0700
Thanks, I'll take a look.
---------------------------------------------------------------------------
by vicb at 2011/06/15 00:48:38 -0700
I would have expected it to be faster however `array_map` is about twice slower... reverted !
Commits
-------
9d6357c [HttpFoundation] Document the changes to the File classes
136b80a [HttFoundation] Add File::getExtension() as \SplFileInfo::getExtension() was introduced in PHP 5.3.6
38b3b74 [HttpKernel] Fix and test previous commit
ac0c00c [HttpFoundation] Make File extends \SplFileInfo
Discussion
----------
[HttpFoundation] Make File extends \SplFileInfo
This is a rebased version of [PR 674](https://github.com/symfony/symfony/pull/674).
* File: The API has changed (now extends \SplFileInfo),
* File: move() creates the target directory when it does not exist
* UploadedFile: introduction of getClientXXX() methods (for Size, OriginalName, MimeType)
If this PR does not get merged UploadedFile should at least be fixed: [Client.php](https://github.com/symfony/symfony/blob/master/src/Symfony/Component/HttpKernel/Client.php#L124) relies on a last parameter which is no more defined and which is used to bypass [move_uploaded_file()](https://github.com/symfony/symfony/blob/master/src/Symfony/Component/HttpFoundation/File/UploadedFile.php#L155) in test mode.
If this could be merged, I'll detail the changes in UPDATE.md
---------------------------------------------------------------------------
by fabpot at 2011/06/14 08:20:59 -0700
I'll merge it. Can you update the UPDATE file?
---------------------------------------------------------------------------
by vicb at 2011/06/14 09:24:01 -0700
done
# Commits
ca52a04 [Validator] Allow DateTime objects as valid Times
# Discussion
## [Validator] Allow DateTime objects as valid Times
Also added tests for `DateTime` objects as valid on `Date` and `Time` constraints.
I didn't include the test for the `DateTime` constraint, as it's already included in this PR:
https://github.com/symfony/symfony/pull/1085
---------------------------------------------------------------------------
## fabpot @ 2011/06/09 09:07:21 -0700
I don't think it makes sense to use a \DateTime instance to represent a Time.
---------------------------------------------------------------------------
## ajessu @ 2011/06/09 09:33:20 -0700
If I have an entity with a doctrine type `Time`:
Time (DateTime instance where only H:i:s get persisted)
```php
<?php
/**
* @ORM\Column(type="time")
* @Assert\Time()
*/
protected $startTime;
```
and I create a form out of this Entity, a `DateTime` object is passed when the form is submitted.
This generates an `UnexpectedTypeException`.
I just made this change to match the `Date` validator with the doctrine type `Date`, which also shares this behavior:
https://github.com/symfony/symfony/blob/master/src/Symfony/Component/Validator/Constraints/DateValidator.php#L28
Date (DateTime instance where only Y-m-d get persisted)
