Commits
-------
5ae76f1 [HttpFoundation] Update documentation.
910b5c7 [HttpFoudation] CS, more tests and some optimization.
b0466e8 [HttpFoundation] Refactored BC Session class methods.
84c2e3c [HttpFoundation] Allow flash messages to have multiple messages per type.
Discussion
----------
[2.1][HttpFoundation] Multiple session flash messages
Bug fix: no
Feature addition: yes
Backwards compatibility break: yes, but this already happened in #2583. BC `Session` methods remain unbroken.
Symfony2 tests pass: yes
Fixes the following tickets: #1863
References the following tickets: #2714, #2753, #2510, #2543, #2853
Todo: -
This PR alters flash messages so that it is possible to store more than one message per flash type using the `add()` method or by passing an array of messages to `set()`.
__NOTES ABOUT BC__
This PR maintains BC behaviour with the `Session` class in that the old Symfony 2.0 methods will continue to work as before.
---------------------------------------------------------------------------
by drak at 2012-02-13T06:28:33Z
I think this is ready for review @fabpot @lsmith77
---------------------------------------------------------------------------
by lsmith77 at 2012-02-14T19:30:39Z
the FlashBag vs. AutoExpireFlashBag behavior and setup difference should probably also be explained in the upgrading log
---------------------------------------------------------------------------
by drak at 2012-02-15T04:43:14Z
@lsmith77 Those differences are explained already in the changelog
* Added `FlashBag`. Flashes expire when retrieved by `get()` or `all()`.
This makes the implementation ESI compatible.
* Added `AutoExpireFlashBag` (default) to replicate Symfony 2.0.x auto expire behaviour of messages auto expiring
after one page page load. Messages must be retrived by `get()` or `all()`.
---------------------------------------------------------------------------
by Crell at 2012-02-19T17:35:34Z
Drak asked me to weigh in here with use cases. Drupal currently has a similar session-stored-messaging system in place that I'd like to be able to replace with Flash messages. We frequently have multiple messages within a single request, however, so this change is critical to our being able to do so.
For instance, when saving an article in Drupal there is, by default, a "yay, you saved an article!" type message that gets displayed. If you also have the site configured to send email when a post is updated, you may see a "email notifications sent" message (depending on your access level). If you have a Solr server setup for search, and you're in debug mode, there will also be a "record ID X added to Solr, it should update in 2 minutes" message. And if there's a bug somewhere, you'll also get, as an error message rather than notice message, a "Oops, E_NOTICE on line 54" message.
Form validation is another case. If you have multiple errors in a single form, we prefer to list all of them. So if you screw up 4 times on a form, you may get 4 different error messages showing what you screwed up so you can fix it in one go instead of several.
Now sure, one could emulate that by building a multi-message layer on top of single-layer messages, but, really, why? "One is a special case of many", and there are many many cases where you'll want to post multiple messages. Like, most of Drupal. :-)
---------------------------------------------------------------------------
by lsmith77 at 2012-03-06T20:55:51Z
@fabpot is there any information you still need before merging this? do you want more discussion in which case you might want to take this to the mailing list ..
---------------------------------------------------------------------------
by drak at 2012-03-08T18:54:13Z
Another plus for this PR is that it requires no extra lines of code in templates etc to display the flashes, see https://github.com/symfony/symfony/pull/3267/files#diff-1
---------------------------------------------------------------------------
by drak at 2012-03-15T06:38:21Z
Rebased against current `master`, should be mergeable again..
---------------------------------------------------------------------------
by evillemez at 2012-03-17T03:08:41Z
+1 to this, I have an extended version of HttpFoundation just for this... would love to get rid of it.
Commits
-------
df11e62 [FrameworkBundle] Used $output->write() instead of echo
c3bf479 [FrameworkBundle] Used Process component
cfa2dff [FrameworkBundle] Changed server:run command description
e7d38c1 [FrameworkBundle] Changed PHP version detection (see: #3529)
4a3f6d5 [FrameworkBundle] Removed global variable from router script
519d431 [FrameworkBundle] Fixed built-in server router script
d9a0a17 [FrameworkBundle] Added server:run command
Discussion
----------
[FrameworkBundle] Added server:run command (PHP 5.4 built-in web server)
Bug fix: no
Feature addition: yes
Backwards compatibility break: no
Symfony2 tests pass: [](http://travis-ci.org/michal-pipa/symfony)
Fixes the following tickets: -
Todo: -
PHP 5.4 comes with [built-in web server](http://www.php.net/manual/en/features.commandline.webserver.php). I've created command which allows to easily run Symfony2 application using this new feature.
Usage:
server:run [-d|--docroot="..."] [-r|--router="..."] [address]
Arguments:
address Address:port (default: 'localhost:8000')
Options:
--docroot (-d) Document root (default: 'web/')
--router (-r) Path to custom router script
Help:
The server:run runs Symfony2 application using PHP built-in web server:
app/console server:run
To change default bind address and port use the address argument:
app/console server:run 127.0.0.1:8080
To change default docroot directory use the --docroot option:
app/console server:run --docroot=htdocs/
If you have custom docroot directory layout, you can specify your own
router script using --router option:
app/console server:run --router=app/config/router.php
See also: http://www.php.net/manual/en/features.commandline.webserver.php
It requires PHP 5.4, otherwise this command will be disabled.
I think that this is very convenient (especially for new users). All you have to do is download Symfony, install vendors and run this command. You don't have to configure "real" web server, in fact any other server is not required. You don't have cache and logs permission problem, because server runs with your local user permissions.
---------------------------------------------------------------------------
by blogsh at 2012-03-06T17:38:10Z
Great feature! I was about to write something like this when I saw that you have already started implementing this :)
Some issues:
1. Missing newlines at the end of the files
2. If I try this server command with the default Symfony Standard Edition Acme demo the links on the main page do not work. The demo link links to "//demo" and the configurator link to "//_configurator". If I go to `localhost:8000/demo` directly the page is rendered as usual and all sub links are generated correctly. I could solve the problem by adding one line:
$_SERVER['SCRIPT_FILENAME'] = 'ANYTHING';
require 'app_dev.php';
I'm not sure where this problem comes from. Do you experience the same behaviour? Otherwise I'll do some more investigations to find the source of the problem.
3 . I think it would be a nice feature if you would generate a router.php based on the setting of the --env flag if no custom router file has been specified. This way it would be easy to switch between dev and prod.
---------------------------------------------------------------------------
by michal-pipa at 2012-03-06T19:00:24Z
@blogsh
> Missing newlines at the end of the files
I've checked and I can see newlines at the end of files. Are you sure about this?
> If I try this server command with the default Symfony Standard Edition Acme demo the links on the main page do not work. The demo link links to "//demo" and the configurator link to "//_configurator". If I go to localhost:8000/demo directly the page is rendered as usual and all sub links are generated correctly. I could solve the problem by adding one line:
>
> $_SERVER['SCRIPT_FILENAME'] = 'ANYTHING';
> require 'app_dev.php';
>
> I'm not sure where this problem comes from. Do you experience the same behaviour? Otherwise I'll do some more investigations to find the source of the problem.
I can reproduce this by changing front controller name from `app.php` to `app_dev.php`. I'll investigate on this.
> I think it would be a nice feature if you would generate a router.php based on the setting of the --env flag if no custom router file has been specified. This way it would be easy to switch between dev and prod.
You can easily change environment specifying front controller in URL. It works exactly the same way as default Apache configuration. This is intended behavior, as it would be misleading if every server had different rewrite rules.
If you really want to change it, then you can write your own router and pass it as a value to `router` option.
---------------------------------------------------------------------------
by blogsh at 2012-03-06T19:13:55Z
Wasn't aware that github omits the trailing white line, sorry.
Normally I use a rather inflexible nginx configuration, so I also wasn't aware of this (rather obvious) trick of changing the url. Thanks for that.
---------------------------------------------------------------------------
by stof at 2012-03-06T22:12:16Z
@blogsh it does not omit it. It displays it in the Linux way where the newline char is part of the line (and so there is a message ``no newline at end of file`` in the diff when it is missing).
---------------------------------------------------------------------------
by michal-pipa at 2012-03-07T07:18:23Z
@blogsh I've fixed router script. Now you can use both front controllers.
---------------------------------------------------------------------------
by michal-pipa at 2012-03-07T07:34:58Z
I've also hardcoded front controller name in router script and removed global variable, as there was no way to unset it.
---------------------------------------------------------------------------
by michal-pipa at 2012-03-13T07:57:04Z
I've used Process component, but now I don't get any stdout output (only stderr).
---------------------------------------------------------------------------
by michal-pipa at 2012-03-13T18:01:58Z
I've replaced `echo` by `$output->write()` and removed `$process` as it was not used actually.
Commits
-------
1422133 [TwigBundle] Made docblock for findTemplate() more general and accurate
5910ac9 [TwigBundle] Added a use statement to shorten class name in a docblock
3e7eebd [TwigBundle] Improved ExceptionController docblocks
Discussion
----------
[TwigBundle] Improved ExceptionController docblocks
Bug fix: no
Feature addition: no
Backwards compatibility break: no
Symfony2 tests pass: [](http://travis-ci.org/lencioni/symfony)
Fixes the following tickets: -
Todo: -
---------------------------------------------------------------------------
by lencioni at 2012-03-21T20:47:16Z
I obviously don't know what I'm doing here. :/
---------------------------------------------------------------------------
by vicb at 2012-03-21T20:47:39Z
no pb just rebase on master and force push
Commits
-------
00ae766 [FrameworkBundle] added new french validators translations for the File constraint.
Discussion
----------
[FrameworkBundle] added new french validators translations for the File ...
Bug fix: no
Feature addition: no
Backwards compatibility break: no
Symfony2 tests pass: yes
Fixes the following tickets: -
Todo: -
Bug fix: yes
Feature addition: no
Backwards compatibility break: no
Symfony2 tests pass: [](http://travis-ci.org/lencioni/symfony)
Fixes the following tickets: -
Todo: -
Relying on decrementing a counter has two problems. First, and most importantly, if the output buffering nesting level is greater than the counter, the function does not perform the expected task. Secondly, on systems where the counter is needed, a lot of unnecessary extra loops would potentially occur.
This approach checks to see if the level has stayed the same from the previous iteration and if it has it stops looping.
Commits
-------
eee5065 [TwigBundle] Workaround a flaw in the design of the configuration (normalization)
Discussion
----------
[TwigBundle] Workaround a flaw in the design of the configuration (norma...
...lization)
see #2823
@Seldaek please comment.
---------------------------------------------------------------------------
by Seldaek at 2012-03-09T20:52:47Z
It seems fine at first glance. I don't have time to look at it in detail right now sorry.
Commits
-------
0e4f789 changed test config
a98d554 [SecurityBundle] Allow switching to the user that is already impersonated (fix#2554)
Discussion
----------
[Security] Disabled exception when switching to the user that is already impersonated
Bug fix: yes-ish
Feature addition: no
Backwards compatibility break: no
Symfony2 tests pass: yes
Fixes the following tickets: #2554
Todo: -
---------------------------------------------------------------------------
by vicb at 2012-03-13T14:31:45Z
@meandmymonkey thank you for your work on this issue. Would you have time to add functional tests ?
---------------------------------------------------------------------------
by meandmymonkey at 2012-03-13T14:49:52Z
Probably not today, but during the next few days, yes, of course.
---------------------------------------------------------------------------
by meandmymonkey at 2012-03-14T18:05:19Z
@vicb @schmittjoh Writing the tests I noticed switching to an non-existent user will not raise an exception. While it's not a security issue, it should raise an error for completeness sake, shouldn't it?
---------------------------------------------------------------------------
by vicb at 2012-03-14T20:28:52Z
I think it should (throw an `AuthenticationCredentialsNotFoundException`). _btw there is an extra `sprintf` in the original code that could be remove when attempting to exit_
---------------------------------------------------------------------------
by meandmymonkey at 2012-03-14T21:13:16Z
The problem with throwing an `AuthenticationCredentialsNotFoundException` (or any other security exception for that matter) is that it derives from `AuthenticationException`, which means it gets caught by the framework and redirects to the login form, which is not what we want in this case.
We need to throw something 500-ish at [L89](d40b3376ec/src/Symfony/Component/Security/Http/Firewall/SwitchUserListener.php (L89)), either a generic or a (new) custom Exception.
---------------------------------------------------------------------------
by meandmymonkey at 2012-03-14T21:43:57Z
IMHO a `LogicException`would be fine, like the one used at [L117](d40b3376ec/src/Symfony/Component/Security/Http/Firewall/SwitchUserListener.php (L117)), as the error is not really about a failed authentication.
---------------------------------------------------------------------------
by vicb at 2012-03-14T21:49:04Z
I agree and btw very good job on the tests !
---------------------------------------------------------------------------
by meandmymonkey at 2012-03-14T22:12:43Z
Thanks :)
---------------------------------------------------------------------------
by vicb at 2012-03-15T08:01:13Z
Could you squash the commits, prefix the commit message with `[SecurityBundle]` and add `(fix#2554)` at the end ?
---------------------------------------------------------------------------
by meandmymonkey at 2012-03-15T08:53:12Z
Done.
---------------------------------------------------------------------------
by vicb at 2012-03-15T09:19:09Z
@fabpot this PR looks good to me.
---------------------------------------------------------------------------
by fabpot at 2012-03-15T12:50:50Z
Tests do not pass when you run them all.
---------------------------------------------------------------------------
by meandmymonkey at 2012-03-15T13:41:45Z
@fabpot @vicb With this config change, they pass when run together.
What is weird though is that the reason seems to be that the config for the profiler gets overwritten when running all tests together, while being used correctly when run alone. Any idea what can cause this? They should be isolated from each other.
The new config from 0e4f789 works, but enables the profiler for all SecurityBundle Tests... which is not strictly necessary.
Disabled exception when switching to the user that is already impersonated, exception is now only thrown when trying to switch to a new user.
Added an Excption exception when switching fails because target user does not exist.
Added funtional tests for switching users.
Commits
-------
eb9bf05 [HttpFoundation] Remove hard coded assumptions and replace with API calls.
9a5fc65 [HttpFoundation] Add more tests.
68074a2 Changelog and upgrading changes.
7f33b33 Refactor SessionStorage to NativeSessionStorage.
b12ece0 [HttpFoundation][FrameworkBundle] Separate out mock session storage and stop polluting global namespace.
d687801 [HttpKernel] Mock must invoke constructor.
7b36d0c [DoctrineBridge][HttpFoundation] Refactored tests.
39526df [HttpFoundation] Refactor away options property.
21221f7 [FrameworkBundle] Make use of session API.
cb873b2 [HttpFoundation] Add tests and some CS/docblocks.
a6a9280 [DoctrineBridge] Refactor session storage to handler.
a1c678e [FrameworkBundle] Add session.handler service and handler_id configuration property.
1308312 [HttpFoundation] Add and relocate tests.
88b1170 [HttpFoundation] Refactor tests.
2257a3d [HttpFoundation] Move session handler classes.
0a064d8 [HttpFoundation] Refactor session handlers.
2326707 [HttpFoundation] Split session handler callbacks to separate object.
bb30a44 [HttpFoundation] Prepare to split out session handler callback from session storage.
Discussion
----------
[2.1] Support PHP 5.4 \SessionHandler
Bug fix: no
Feature addition: yes
Backwards compatibility break: no
Symfony2 tests pass: yes
Fixes the following tickets: -
Todo: -
This patch allows us to add services, like an encryption layer into any session handler without having to alter or inherit any code across any session handler, internal or custom.
The `\SessionHandler` class exposes internal PHP's native internal session save handlers like files, memcache, and sqlite by wrapping the internal callbacks through the class giving user-space the chance to intercept, override and filter them by inheriting from `\SessionHandler`. I've written a pretty nice use-case at http://docs.php.net/sessionhandler which really shows the power of it. I never considered how to make proper use of the `\SessionHandler` in Symfony2 until I wrote the code example you see in that documentation and also because of the `AbstractSessionStorage` base class got in the way.
It's really trivial to enable support for this in Symfony2 but requires to separate out the actual handlers because inheritance is not suitable.
Obviously, the feature will only work with internal PHP-extension provided handlers under PHP 5.4 and will already work in PHP 5.3 with any custom handler (since they all implement `\SessionHandlerInterface`). Symfony2 will also be the first framework to support these amazing features :-D
The necessary changes are really small but beautiful:
The basic idea is this: 1d55d1ff14 removed inheritance and separates out the actual session handler callbacks - the part PHP processes internally.
This is supported by an internal proxy mechanism: 10a36c901e
In terms of BC, not much changes net from 2.0:
- We can restore the deprecated service ID: `session.storage.native`
- We add a new service ID `session.handler` (and configuration alias `handler_id`) for the actual session handlers. This defaults to the renamed `session.handler.native_file` session handler (same behaviour just new name and as it's a default there is no BC break).
---------------------------------------------------------------------------
by fabpot at 2012-03-03T12:15:10Z
Looks good to me. Can you update the CHANGELOG and UPGRADE file accordingly and start to update the documentation at symfony/symfony-docs? Thanks for your work, the session handling in Symfony2 is starting to become amazing!
---------------------------------------------------------------------------
by drak at 2012-03-04T11:09:31Z
@fabpot I will start working on documentation this week and get the CHANGELOG/UPGRADING committed shortly. I'll ping when done.
---------------------------------------------------------------------------
by drak at 2012-03-14T16:48:37Z
@fabpot - This PR is ready now.
Revert service back to session.storage.native
Rename session.storage.native_file to session.handler.native_file (which is the default so no BC break from 2.0)
Commits
-------
14a18ae [WebProfilerBundle] Optimized toolbar and profiler icons with optiPNG
Discussion
----------
[WebProfilerBundle] Optimized toolbar and profiler icons with optiPNG
Bug fix: no
Feature addition: no
Backwards compatibility break: no
Symfony2 tests pass: yes
Optimized web toolbar and profiler icons (pngs) to slightly reduce PNG sizes. Lossless compression.
Commits
-------
afbb8f2 Fixed misleading help for "name" argument as search for services with wildcards is not implemented
Discussion
----------
[FrameworkBundle, Console] Changed help text for container:debug command
Fixed help for "name" argument as search for services with wildcards is not implemented in ContainerDebugCommand
This quickly addresses the problem when the helper is constructed in a console environment without request scope. Ideally, the helper should be able to construct the absolute logout URL using data already available in the UrlGenerator's RequestContext and the $_SERVER environment variable; however, that will require copying some code from the Request class to create a base URI and path.
Fixes#3508
Commits
-------
b73c703 Reverting return type left by mistake
881d290 Updating use of DoctrineBundle Registry to use the proper path to Doctrine\Bundle\DoctrineBundle\Registry
Discussion
----------
Updating use of DoctrineBundle Registry to use the proper path
Pointed to the new class: Doctrine\Bundle\DoctrineBundle\Registry
---------------------------------------------------------------------------
by adrienbrault at 2012-03-01T22:12:42Z
I think the return type should stay ```Registry```
---------------------------------------------------------------------------
by rdohms at 2012-03-01T22:48:35Z
Yes, that was a mistake, reverted.
Commits
-------
49a8654 [Security] Use LogoutException for invalid CSRF token in LogoutListener
a96105e [SecurityBundle] Use assertCount() in tests
4837407 [SecurityBundle] Fix execution of functional tests with different names
66722b3 [SecurityBundle] Templating helpers to generate logout URL's with CSRF tokens
aaaa040 [Security] Allow LogoutListener to validate CSRF tokens
b1f545b [Security] Refactor LogoutListener constructor to take options
c48c775 [SecurityBundle] Add functional test for form login with CSRF token
Discussion
----------
[Security] Implement support for CSRF tokens in logout URL's
```
Bug fix: no
Feature addition: yes
Backwards compatibility break: no
Symfony2 tests pass: yes
Fixes the following tickets: -
Todo: -
```
[](http://travis-ci.org/jmikola/symfony)
This derived from #3006 but properly targeting on the master branch.
This exposes new configuration options to the logout listener to enable CSRF protection, as already exists for the form login listener. The individual commits and their extended messages should suffice for explaining the logical changes of the PR.
In addition to changing LogoutListener, I also created a templating helper to generate logout URL's, which includes a CSRF token if necessary. This may or may not using routing, depending on how the listener is configured since both route names or hard-coded paths are valid options.
Additionally, I added unit tests for LogoutListener and functional tests for both CSRF-enabled form logins and the new logout listener work.
Kudo's to @henrikbjorn for taking the time to document CSRF validation for form login listeners (see [here](http://henrik.bjrnskov.dk/symfony2-cross-site-request-forgery/)). The [Logout CSRF Protection](http://www.yiiframework.com/wiki/190/logout-csrf-protection/) article on the Yii Framework wiki was also helpful in drafting this.
---------------------------------------------------------------------------
by jmikola at 2011-12-31T07:50:31Z
Odd that Travis CI reported a build failure for PHP 5.3.2, but both 5.3 and 5.4 passed: http://travis-ci.org/#!/jmikola/symfony/builds/463356
My local machine passes as well.
---------------------------------------------------------------------------
by jmikola at 2012-02-06T20:05:30Z
@schmittjoh: Please let me know your thoughts on the last commit. I think it would be overkill to add support for another handler service and/or error page just for logout exceptions.
Perhaps as an alternative, we might just want to consider an invalid CSRF token on logout imply a false return value for `LogoutListener::requiresLogout()`. That would sacrifice the ability to handle the error separately (which a 403 response allows us), although we could still add logging (currently done in ExceptionListener).
---------------------------------------------------------------------------
by jmikola at 2012-02-13T17:41:33Z
@schmittjoh: ping
---------------------------------------------------------------------------
by fabpot at 2012-02-14T23:36:22Z
@jmikola: Instead of merging symfony/master, can you rebase?
---------------------------------------------------------------------------
by jmikola at 2012-02-15T00:00:49Z
Will do.
---------------------------------------------------------------------------
by jmikola at 2012-02-15T00:05:48Z
```
[avocado: symfony] logout-csrf (+9/-216) $ git rebase master
First, rewinding head to replay your work on top of it...
Applying: [SecurityBundle] Add functional test for form login with CSRF token
Applying: [Security] Refactor LogoutListener constructor to take options
Applying: [Security] Allow LogoutListener to validate CSRF tokens
Applying: [SecurityBundle] Templating helpers to generate logout URL's with CSRF tokens
Applying: [SecurityBundle] Fix execution of functional tests with different names
Applying: [SecurityBundle] Use assertCount() in tests
Using index info to reconstruct a base tree...
Falling back to patching base and 3-way merge...
Applying: [Security] Use LogoutException for invalid CSRF token in LogoutListener
[avocado: symfony] logout-csrf (+7) $ git st
# On branch logout-csrf
# Your branch and 'origin/logout-csrf' have diverged,
# and have 223 and 9 different commit(s) each, respectively.
#
nothing to commit (working directory clean)
[avocado: symfony] logout-csrf (+7) $
```
After rebasing, my merge commits disappeared. Is this normal?
---------------------------------------------------------------------------
by stof at 2012-02-15T00:15:07Z
Are you sure they disappeared ? Diverging from the remote branch is logical (you rewrote the history and so changed the commit id) but are you sure it does not have the commits on top of master ? Try ``git log master..logout-scrf``
If your commut are there, you simply need to force the push for the logout-csrf branch (take care to push only this branch during the force push to avoid messing all others as git won't warn you when asking to force)
---------------------------------------------------------------------------
by stof at 2012-02-15T00:17:09Z
ah sorry, you talked only about the merge commit. Yeah it is normal. When reapplying your commits on top of master, the merge commit are not kept as you are reapplying the changes linearly on top of the other branch (and deleting the merge commit was the reason why @fabpot asked you to rebase instead of merging btw)
---------------------------------------------------------------------------
by jmikola at 2012-02-15T00:18:00Z
The merge commits are not present in `git log master..logout-csrf`. Perhaps it used those merge commits when rebasing, as there were definitely conflicts resolved when I originally merged in symfony/master (@fabpot had made his own changes to LogoutListener).
I'll force-push the changes to my PR brange. IIRC, GitHub is smart enough to preserve inline diff comments, provided they were made through the PR and not on the original commits.
---------------------------------------------------------------------------
by jmikola at 2012-02-15T00:19:38Z
That worked well. In the future, I think I'll stick to merging upstream in and then rebasing afterwards. Resolving conflicts is much easier during a merge than interactive rebase.
---------------------------------------------------------------------------
by jmikola at 2012-02-23T18:46:13Z
@fabpot @schmittjoh: Is there anything else I can do for this PR? I believe the exception was the only outstanding question (see: [this comment](https://github.com/symfony/symfony/pull/3007#issuecomment-3835716)).
Commits
-------
bafcaaf Removed version field
f9d9dc7 Add branch-alias for composer
Discussion
----------
Add branch-alias for composer
This should restore the 2.1-dev version (as an alias of dev-master) so that `2.*` or `2.1.*` constraints work again. I'll adjust packagist soon to also display those aliases.
Commits
-------
6e75fd1 Resolves issue with spl_autoload_register creating new copies of the container and passing that into the closure.
Discussion
----------
[DoctrineBundle] fixed proxy loader memory leak
[](http://travis-ci.org/kriswallsmith/symfony)
The hack for loading Doctrine proxy classes has an obscure memory leak, fixed here by @jjbohn.
## The Proof
Run this test case before and after this patch:
```php
<?php
namespace Kris\JunkBundle\Tests\Controller;
use Symfony\Bundle\FrameworkBundle\Test\WebTestCase;
class DefaultControllerTest extends WebTestCase
{
/**
* @dataProvider asdf
*/
public function testIndex()
{
$client = static::createClient();
$crawler = $client->request('GET', '/hello/Fabien');
$this->assertTrue($crawler->filter('html:contains("Hello Fabien")')->count() > 0);
}
public function asdf()
{
return array_fill(0, 500, array());
}
}
```
### Before
```
~/Sites/symfony/standard (2.0) $ phpunit -c app/
PHPUnit 3.6.10 by Sebastian Bergmann.
Configuration read from /Users/kriswallsmith/Sites/symfony/standard/app/phpunit.xml.dist
............................................................... 63 / 500 ( 12%)
............................................................... 126 / 500 ( 25%)
............................................................... 189 / 500 ( 37%)
............................................................... 252 / 500 ( 50%)
............................................................... 315 / 500 ( 63%)
............................................................... 378 / 500 ( 75%)
............................................................... 441 / 500 ( 88%)
...........................................................
Time: 31 seconds, Memory: 289.50Mb
OK (500 tests, 500 assertions)
```
### After
```
~/Sites/symfony/standard (2.0) $ phpunit -c app/
PHPUnit 3.6.10 by Sebastian Bergmann.
Configuration read from /Users/kriswallsmith/Sites/symfony/standard/app/phpunit.xml.dist
............................................................... 63 / 500 ( 12%)
............................................................... 126 / 500 ( 25%)
............................................................... 189 / 500 ( 37%)
............................................................... 252 / 500 ( 50%)
............................................................... 315 / 500 ( 63%)
............................................................... 378 / 500 ( 75%)
............................................................... 441 / 500 ( 88%)
...........................................................
Time: 40 seconds, Memory: 51.25Mb
OK (500 tests, 500 assertions)
```
## tl;dr
Your test suite will use much less memory — 82% in this case.
```
Bug fix: no
Feature addition: no
Backwards compatibility break: no
Symfony2 tests pass: yes
Fixes the following tickets: -
Todo: -
```
---------------------------------------------------------------------------
by mvrhov at 2012-02-23T06:25:57Z
IMHO this change warrants a comment inside a source code as somebody might actually try to remove the first by reference assign like stof said.
---------------------------------------------------------------------------
by lsmith77 at 2012-02-23T07:55:48Z
this autoloader sounds like something we also need in the ODM's?
---------------------------------------------------------------------------
by stof at 2012-02-23T08:23:17Z
@lsmith77 if you want to allow unserializing proxies without forcing to generate them before (which would be an issue in debug mode), yeah. But take care that each Doctrine bundle should use a different proxy namespace to allow doing the check (there was some issues for people using both the ORM and the mongo ODM because of this)
---------------------------------------------------------------------------
by lsmith77 at 2012-02-23T08:24:33Z
then maybe this could should be a static method inside the bridge?
---------------------------------------------------------------------------
by beberlei at 2012-02-23T11:50:08Z
I think another side of this problem is that ->boot() ALWAYS adds this method on the autoloading stack. So with N tests you have N more autoloaders on the stack.
---------------------------------------------------------------------------
by pminnieur at 2012-02-23T12:07:00Z
This could be an issue if you use Symfony with Leach as an application server, too. After a while, memory is exhausted in face of `gc_collect_cycles` and `$kernel->boot()` and `$kernel->shutdown()` calls in between each request - which ultimately leads to a segfault after some time. I tried to track down what causes increasing memory usage and I think this could be the error.
---------------------------------------------------------------------------
by beberlei at 2012-02-23T12:28:06Z
its definately the problem, we need to remove the autoloader in shutdown, or move it elsewhere.
---------------------------------------------------------------------------
by lsmith77 at 2012-02-23T14:58:37Z
why isnt this just a setup task for the autoloader just like the annotation registry?
---------------------------------------------------------------------------
by stof at 2012-02-23T16:52:42Z
@lsmith77 because the proxy namespace and the proxy dir are not known in the autoload.php file. They are configured in the config files
---------------------------------------------------------------------------
by fabpot at 2012-02-23T18:05:51Z
The `shutdown()` method is where the autoloader should be removed. Can we include this in this PR as well so that we fix everything once and for all?
---------------------------------------------------------------------------
by kriswallsmith at 2012-02-23T19:12:05Z
The once and for all solution is for the Doctrine O*M projects to provide a ProxyLoader class with register and unregister methods that we call in boot and shutdown. We're not solving anything specific to Symfony here.
Commits
-------
0a176eb [FrameworkBundle] Fix configuration errors
6745b28 [Config] Throw exceptions on invalid definition
fb27de0 [Config] cleanup
Discussion
----------
[Config] Cleanup, error detection, fixes
see #3357
---------------------------------------------------------------------------
by stloyd at 2012-02-15T10:56:00Z
@vicb As you added new exceptions, IMO you should add some tests to cover it.
---------------------------------------------------------------------------
by vicb at 2012-02-15T10:56:50Z
good point, I'll do.
---------------------------------------------------------------------------
by vicb at 2012-02-15T13:49:44Z
@stloyd that was a great idea, I realized I had miss a case. It has been added and should be covered by UT + fixes made.
I am done with the fixes, should be ready to merge.
And time to give the `PrototypedArrayNode` some more usability now.
Commits
-------
ed028d5 [WebProfilerBundle] Made is_ajax available to the view when rendering panels
Discussion
----------
[Profiler] Ajax
The first commit should be merged as `app` is not always accessible in the twig template due to the ways the templating system is used. Then there is currently no way to check if we are dealing with an ajax request in the view.
The second commit use ajax to load the panels. This should make the interface more responsive as you don't have to load the layout each time + the panels are cached. Loading via AJAX would also work if your panel does not extend the ajax layout (legacy support) - this would be less efficient though as you would load the layout and filter it out afterwards.
I am not sure if the second commit is worth merging, maybe it is useless ?
---------------------------------------------------------------------------
by stof at 2012-02-12T20:40:16Z
@vicb please rebase
---------------------------------------------------------------------------
by stof at 2012-02-13T17:48:48Z
@vicb just FYI, this conflicts with master so you will need to rebased it before it can be merged.
Otherwise, what are the remaining points ?
---------------------------------------------------------------------------
by vicb at 2012-02-13T17:57:27Z
I am still wondering if the second commit is a good idea or not ?
---------------------------------------------------------------------------
by vicb at 2012-02-13T18:28:17Z
@stof isn't the branch based on the latest master ?
---------------------------------------------------------------------------
by stof at 2012-02-13T19:32:52Z
Well, github tells me it cannot be merged automatically. so either there is a conflict, either their conflict detection failed last time you pushed.
---------------------------------------------------------------------------
by vicb at 2012-02-13T22:20:06Z
I did fail.
Should be ok now.
---------------------------------------------------------------------------
by fabpot at 2012-02-14T23:27:08Z
I'm -1 on the second commit.
---------------------------------------------------------------------------
by vicb at 2012-02-15T07:44:25Z
Thanks all for the feedback.
@fabpot ready !
---------------------------------------------------------------------------
by stof at 2012-02-15T07:46:53Z
@vicb not ready: you reverted all use of ``is_ajax`` in the templates (and you did not renamed it to the underscored name preferred by @fabpot)
---------------------------------------------------------------------------
by vicb at 2012-02-15T07:54:30Z
Well I did revert the use of "`isajax`" (prefer not to mix CS here, the scope of this PR is not to fix CS) because it is not used (this should be applied to the Doctrine profiler).
_What I mean is that `isajax` in all the Sf templates w/o the associated js is useless, basically all or nothing_
---------------------------------------------------------------------------
by vicb at 2012-02-15T08:26:41Z
btw @fabpot it makes me wonder if underscored variable names is a good idea, this will force us to mix (i.e. `is_ajax` vs `request.isxmlhttprequest`). What do you think ?
---------------------------------------------------------------------------
by fabpot at 2012-02-15T10:09:20Z
I still prefer `is_ajax` as it makes things more readable.
---------------------------------------------------------------------------
by vicb at 2012-02-15T10:16:13Z
At a larger scale how do fix the inconsistency described in my previous message ?
Options are:
* fix twig cs
* create twig cs specific to sf2
* don't fix (= keep & live with some inconsistency)
---------------------------------------------------------------------------
by stof at 2012-02-15T10:22:13Z
@vicb we also use underscores for variables used in the form themes. the official Twig CS are basically the one used by Sf2 in the form theme
---------------------------------------------------------------------------
by fabpot at 2012-02-15T10:24:46Z
I don't see any inconsistencies here. One a variable name and the other is a method call/property name. So, my vote is a don't fix.
---------------------------------------------------------------------------
by vicb at 2012-02-15T10:28:53Z
I agree but then we loose one advertised benefit a twig: _"Easy to learn: The syntax is easy to learn and has been optimized to allow web designers to get their job done fast without getting in their way"_.
The designers should now be aware of the underlying implementation (i.e. Am I dealing with a variable or a function ?)
Edit: race condition here... I agree with @stof
---------------------------------------------------------------------------
by stof at 2012-02-15T10:45:49Z
@vicb they see that ``isXmlHttpRequest`` is not a variable. They are accessing it on the ``request`` variable (well, recurse here to reach the variable)
---------------------------------------------------------------------------
by fabpot at 2012-02-15T10:46:57Z
variables and functions are underscored.
---------------------------------------------------------------------------
by vicb at 2012-02-15T10:51:28Z
I think that the beauty of Twig comes from the fact that designers do not have to wonder if "something" is an array / an object / a variable / a method / a property.
But never mind, I'll update the PR.
---------------------------------------------------------------------------
by vicb at 2012-02-15T10:55:06Z
@fabpot would you mind if I open a PR against twig to check for existence of `collector::getNotCalledListeners()` when a designer writes `collector.not_called_listeners`, then we are all happy ?
---------------------------------------------------------------------------
by vicb at 2012-02-15T11:21:55Z
ready !
---------------------------------------------------------------------------
by fabpot at 2012-02-15T11:31:50Z
The problem is that the `Twig_Template::getAttribute()` is already the bottleneck
Using "securitybundletest" as the default environment for the functional test's kernel causes a PHP fatal error redeclaring the class "appSecuritybundletestDebugProjectContainer" when multiple tests (with unique names) are executed. In lieu of forcing tests to specify their own environment explicitly, we can simply append the test name into the environment.
Note: this bug may be related to PHPUnit executing multiple tests within the same process.
As each firewall is configured, its logout listener (if any) will be registered with the LogoutUrlHelper service. In a template, this helper may be used to generate relative or absolute URL's to a particular firewall's logout path. A CSRF token will be appended to the URL as necessary.
The Twig extension composes the helper service to avoid code duplication (see: #2999).
This adds several new options to the logout listener, modeled after the form_login listener:
* csrf_parameter
* intention
* csrf_provider
The "csrf_parameter" and "intention" have default values if omitted. By default, "csrf_provider" is empty and CSRF validation is disabled in LogoutListener (preserving BC). If a service ID is given for "csrf_provider", CSRF validation will be enabled. Invalid tokens will result in an InvalidCsrfTokenException being thrown before any logout handlers are invoked.
Commits
-------
cea2c7e removed unneeded local variable
924f378 updated changelog
72d5805 changed route name
41cc0d6 [FrameworkBundle] added support for HInclude
Discussion
----------
[FrameworkBundle] added support for HInclude
Bug fix: no
Feature addition: yes
Backwards compatibility break: no
Symfony2 tests pass: yes
Fixes the following tickets: -
Todo: discuss
Example: https://github.com/kbond/symfony-standard/tree/hinclude
**Reopened this as I broke #2903**
References:
- http://groups.google.com/group/symfony-devs/browse_thread/thread/b74e587d6f2f87b0
- http://groups.google.com/group/symfony-devs/browse_thread/thread/8776a9833d4a5f79
- #2903
- #2865
[](http://travis-ci.org/kbond/symfony)
---------------------------------------------------------------------------
by kbond at 2012-02-11T20:27:22Z
unless there is anything else I think this is ready, want me to squash again?
---------------------------------------------------------------------------
by fabpot at 2012-02-11T21:07:33Z
@kbond: Can you add some information about the changes in the CHANGELOG?
---------------------------------------------------------------------------
by Tobion at 2012-02-11T21:33:32Z
Do I see it correctly that we cannot set a default template on a per hinclude tag basis? But only global?
That's not really usefull when javascript is disabled because it should resemble the content to be included as an alternative.
---------------------------------------------------------------------------
by stof at 2012-02-11T21:42:15Z
@Tobion currently it is not possible. But changing the content on a tag basis may require changing the way the render tag look like (as there is no content in the tag currently) so this needs further discussion and @fabpot said he wants to merge a first implementation without it. See the discussion above.
Commits
-------
9d6eb82 [Routing] Fix a bug in the TraceableUrlMatcher
9fc8d28 [FrameworkBundle] Fix a bug in the RedirectableUrlMatcher
4fcf9ef [Routing] Small optimization in the UrlMatcher
abc2141 [Routing] Added a missing property declaration
d86e1eb [Routing] Remove a weird dependency
Discussion
----------
[Routing] Remove a dependency on a derived class, fixes, optim
Subset of #3296 which should be acceptable.
Travis is happy.
The side effect of removing the dependency is that the `UrlMatcher` does not throw an exception any more when the scheme does not match the required scheme. I think it is better because:
* it removes a dependency on a derived class,
* it was an undocumented "feature",
* other thrown excs are component specific while this one was raw SPL.
---------------------------------------------------------------------------
by vicb at 2012-02-09T14:43:02Z
let me know what should go in 2.0 as well.
Commits
-------
b3fd2fa [Propel] Added Propel to Stopwatch
Discussion
----------
[Propel] Added Propel to Stopwatch
I've added the Stopwatch feature, everything is ready on the PropelBundle.
The trick is to log `prepare` queries in Propel, that way we got first the prepared statement, and then the executed query. That's why there is a `$isPrepare` boolean.
I kept BC if people don't update the PropelBundle too.
William
---------------------------------------------------------------------------
by stof at 2012-02-14T12:16:51Z
@willdurand toggling a flag for each call seems a bit hackish to me. Is there no better way to do it ?
---------------------------------------------------------------------------
by willdurand at 2012-02-14T12:21:38Z
Unfortunately no... But it's quite safe as we cannot change logged methods.
There is neighter start/stop methods, nor typed messages.
Le 14 févr. 2012 à 13:16, Christophe Coevoet<reply@reply.github.com> a écrit :
> @willdurand toggling a flag for each call seems a bit hackish to me. Is there no better way to do it ?
>
> ---
> Reply to this email directly or view it on GitHub:
> https://github.com/symfony/symfony/pull/3352#issuecomment-3959592
---------------------------------------------------------------------------
by stof at 2012-02-14T12:26:04Z
@willdurand then let's use this for propel 1. But please improve the logging interface for Propel 2 :)
---------------------------------------------------------------------------
by willdurand at 2012-02-14T12:34:28Z
Sure! I've added that on my todolist…
2012/2/14 Christophe Coevoet <
reply@reply.github.com
>
> @willdurand then let's use this for propel 1. But please improve the
> logging interface for Propel 2 :)
>
> ---
> Reply to this email directly or view it on GitHub:
> https://github.com/symfony/symfony/pull/3352#issuecomment-3959729
>
Commits
-------
7474293 memcache profiler storage support added
Discussion
----------
[HttpKernel] [FrameworkBundle] Memcache(d) Profiler Storage added
Bug fix: no
Feature addition: yes
Backwards compatibility break: no
Symfony2 tests pass: yes
Fixes the following tickets: -
Todo: -
There are 2 memcache PHP extensions: Memcache and MemcacheD (with "D" at the end) - both are supported.
How to use Memcache Profiler Storage (Memcache php extension is used):
change (or add if there isn't) "dsn" in framework/profiler section in config_dev.yml
```
...
framework:
...
profiler:
...
dsn: memcache://127.0.0.1/11211
...
```
How to use Memcached Profiler Storage (MemcacheD php extension is used):
change "dsn" in framework/profiler section in config_dev.yml
```
...
framework:
...
profiler:
...
dsn: memcached://127.0.0.1/11211
...
```
Last changes:
- memcached support addedd
- optimized performance (serialization done in extension, index is created with ```append``` function)
- updated to last version of Profiler (find by method, avoid duplications)
- done squash on commits
---------------------------------------------------------------------------
by stloyd at 2011-12-01T23:36:02Z
You need to add check for index name size, AFAIK memcache will fail if key is longer than 250 characters.
Also please do an `squash` for all those commits.
---------------------------------------------------------------------------
by pulzarraider at 2011-12-02T00:15:28Z
@stloyd Thanks. I will add the check for key length.
I am just starting with git. Could you please add some tutorial about squash to a documentation page: http://symfony.com/doc/2.0/contributing/code/patches.html ? It will help me (and maybe some others) to do it correct way.
---------------------------------------------------------------------------
by stof at 2011-12-02T00:19:01Z
http://help.github.com/rebase/
---------------------------------------------------------------------------
by pulzarraider at 2011-12-03T18:56:11Z
Thanks @stof, rebase done.
---------------------------------------------------------------------------
by dlsniper at 2011-12-11T14:00:17Z
Hi,
Would it be possible to either use Memcached instead of Memcache or make it configurable to use either Memcache or Memcached?
I've did a little digging on the benefits of using Memcached over Memcache (like for example: http://stackoverflow.com/questions/1442411/using-memcache-vs-memcached-with-phphttp://devzone.zend.com/1869/zendcon-sessions-episode-040-memcached-the-better-memcache-interface/ ) and maybe this will also help in not having two extensions installed for people who are using Memcached already.
Regards.
---------------------------------------------------------------------------
by pulzarraider at 2011-12-11T16:15:58Z
@dlsniper thanks for great comment. I will add memcached support.
---------------------------------------------------------------------------
by stof at 2011-12-12T20:49:00Z
@pulzarraider what is the status of this PR ? Is it still a WIP ?
---------------------------------------------------------------------------
by pulzarraider at 2011-12-12T22:58:48Z
@stof Yes, it's still WIP. I'm working on a memcached (with D at the end) support. It will be finished in the next few days.
---------------------------------------------------------------------------
by dlsniper at 2011-12-15T12:51:52Z
@pulzarraider if I can help you with the PR let me know.
---------------------------------------------------------------------------
by pulzarraider at 2012-01-08T20:22:24Z
@dlsniper @stof I've finally added memcached support and done some optimizations. Memcache(d) profiler storage is now ready.
---------------------------------------------------------------------------
by dlsniper at 2012-01-08T22:12:29Z
I'm glad you finished this @pulzarraider
Thanks! for your hard work!
+1 for this PR
@stof, @fabpot is it good to go on master?
---------------------------------------------------------------------------
by pulzarraider at 2012-01-28T19:45:56Z
@stof, @fabpot ping
Commits
-------
3dd3d58 [EventListener] Fix an issue with sub-requests
71bf279 cleanup
acdb325 [StopWatch] Provide a cleaner API
acd1287 [Stopwatch] rename the section event to avoid collisions
eb540be [Profiler] Allow profiling the terminate event
4ccdc53 [HttpKernel] Cleanup of PdoProfilerStorage
814876f [HttpKernel] Tweak the code of the ProfilerListener
Discussion
----------
[Profiler] Allow profiling the terminate event
This PR is mainly about allowing to profile the terminate event (i.e. see it in the timeline panel)
There are some other tweaks.
---------------------------------------------------------------------------
by vicb at 2012-02-02T14:43:20Z
please don't merge for now. good question. bad answer.
---------------------------------------------------------------------------
by vicb at 2012-02-06T15:05:46Z
While first commits were focused on problem solving, the last brings a clean API with the ability to re-open an existing section in order to add events (re-setting event origins and merging them were just hacks).
Should be ready to be merged.
_Edit: Sorry, couldn't resist adding a private helper class again!_
---------------------------------------------------------------------------
by stof at 2012-02-06T18:30:09Z
@vicb you should stop adding such classes defined in the same file. Otherwise we will have to change the CS (and to stop telling we respect the PSR-0 standard)
---------------------------------------------------------------------------
by vicb at 2012-02-06T18:33:36Z
Once again PSR-0 is about autoloading which is exactly why I do not want in such cases. CS are an other matter and yes I think they should be changed to allow this (and I am going to submit a PR right now).
The only argument I could accept is whether this class should be private or not.
---------------------------------------------------------------------------
by vicb at 2012-02-06T19:57:06Z
Thanks for your valuable feedback @stof
---------------------------------------------------------------------------
by fabpot at 2012-02-11T20:53:03Z
Have you tested it on a project? Because it breaks my simple examples (where I have some sub-requests).
---------------------------------------------------------------------------
by vicb at 2012-02-12T09:47:23Z
my bad, should be ok now.
Rename ArraySessionStorage to make it clear the session is a mock for testing purposes only.
Has BC class for ArraySessionStorage
Added sanity check when starting the session.
Fixed typos and incorrect php extension test method
session_module_name() also sets session.save_handler, so must use extension_loaded() to check if module exist
or not.
Respect autostart settings.
Commits
-------
ac59db7 cleanup
64ea95d [WebProfilerBundle] Add redirection info to the router panel
826bd23 [FrameworkBundle] fix phpDoc of ControllerResolver::createController()
e3cf37f [HttpFoundation] RedirectResponse: add the ability to retrieve the target URL, add unit tests
50c85ae [WebProfiler] Add info to the router panel
Discussion
----------
[WIP][Profiler] Routing
former #3206 part 3 (depends on part 1 - #3280)
The goal of this PR is to fix#3264 by adding redirection infos on the router panel.
Done:
* Add info on the target url / route
To do:
* Display an accurate URL matching process (when using the RedirectableUrlMatcher)
Commits
-------
0d4d7e0 [WebProfilerBundle] Make the toolbar use the common JS
a440279 [WebProfilerBundle] Adds panel pages
762d90d [Profiler] Buid a common infrastructure
Discussion
----------
[Profiler] Provide a common infrastructure
former #3206 part 3
* base JS (provides ajax, toggle, css class helpers),
* panel pages (used only by the Doctrine panel for now).
Successfuly tested with the (future version of the) Doctrine panel.
Commits
-------
2e4ebe4 [Validator] Renamed methods addViolationAtRelativePath() and getAbsolutePropertyPath() in ExecutionContext
9153f0e [Validator] Deprecated ConstraintValidator methods setMessage(), getMessageTemplate() and getMessageParameters()
0417282 [Validator] Fixed typos
a30a679 [Validator] Made ExecutionContext immutable and introduced new class GlobalExecutionContext
fe85bbd [Validator] Simplified ExecutionContext::addViolation(), added ExecutionContext::addViolationAt()
f77fd41 [Form] Fixed typos
1fc615c Fixed string access by curly brace to bracket
a103c28 [Validator] The Collection constraint adds "missing" and "extra" errors to the individual fields now
f904a9e [Validator] Fixed: GraphWalker does not add constraint violation if error message is empty
1dd302c [Validator] Fixed ConstraintViolationList::__toString() to not include dots in the output if the root is empty
1678a3d [Validator] Fixed: Validator::validateValue() propagates empty validation root instead of the provided value
Discussion
----------
[Validator] Improved "missing" and "extra" errors of Collection constraint
Bug fix: yes
Feature addition: no
Backwards compatibility break: no
Symfony2 tests pass: yes
Fixes the following tickets: #2615
Todo: -
Instead of a single violation
Array:
The fields "foo", "bar" are missing
various violations are now generated.
Array[foo]:
This field is missing
Array[bar]:
This field is missing
Apart from that, the PR contains various minor fixes to the Validator.
---------------------------------------------------------------------------
by bschussek at 2012-02-02T09:14:52Z
@fabpot Ready for merge.
Commits
-------
e9b4c58 [Console] Enable process isolantion in Shell
Discussion
----------
[Console] Enable process isolantion in Shell
Bug fix: no
BC break: no
Feature addition: yes
Symfony2 test pass: yes
Fixes the following tickets: #2848#2847
Todo: Write unit tests
See tickets for reference, need help with unit testing, because I don't know how to test this :)
---------------------------------------------------------------------------
by canni at 2011-12-16T09:36:32Z
I've tested this with different scenarios like "inception" (invoking shell from shell - will not work) ;) and others, everything seems to work great.
As I have no idea on how to pack this with unit testing some help needed, also as I don't have any windows in home ;) need someone to test it on MS os.
And we should decide, do we want process isolation by default? (This will not break the BC, break only the "expected behavior" - colorful output and "interactivity")
---------------------------------------------------------------------------
by canni at 2011-12-18T15:14:26Z
I've rebased this branch to match current `HEAD` and I've added usage of new process builder, for better portability an shell arg escaping.
---------------------------------------------------------------------------
by fabpot at 2012-02-02T08:28:32Z
@canni: Can you squash your commits before I merge this PR? Thanks.
---------------------------------------------------------------------------
by canni at 2012-02-02T09:07:16Z
@fabpot @stof done.
Bug fix: no
BC break: no
Feature addition: yes
Symfony2 test pass: yes
Fixes the following tickets: #2848#2847
Todo: -
See tickets for reference, need help with testing, because I don't know how to test this :)
Commits
-------
de253dd [Form] read_only and disabled attributes
Discussion
----------
[Form] read_only and disabled attributes (closes#1974)
1. Removed ``readOnly`` property from ``Form``, as it is no longer required
2. Introduced ``disabled`` property to ``Form``, behaves exactly like ``readOnly`` used to
3. Added ``disabled`` property to fields, defaults to ``false``, renders as ``disabled="disabled"``
4. A field with positive ``read_only`` property now renders as ``readonly="readonly"``
---------------------------------------------------------------------------
by helmer at 2012-01-26T17:46:17Z
I changed ``Form`` and ``FormBuilder`` property ``readOnly`` to ``disabled``. On second thought, this is perhaps not such good change - while readOnly somewhat implied the use-case, disabled no longer does.
Perhaps something else, like ``bindable`` (as not to confuse with read_only attribute of Fields)?
@bschussek, others, any thoughts?
---------------------------------------------------------------------------
by bschussek at 2012-01-31T06:53:59Z
Please prefix commits with the affected component, if applicable.
---------------------------------------------------------------------------
by helmer at 2012-01-31T08:41:03Z
@bschussek Prefixed. Please also see see to [this question](https://github.com/symfony/symfony/pull/3193#issuecomment-3673074)
Commits
-------
2374e54 Break paths in exceptions hard with css if necessary
Discussion
----------
Exceptions: Break source-paths with CSS
Sometimes in exceptions absolute paths of files are pretty long and need more than one line.
eg.: `/Volumes/Macintosh HD/Users/blabla/Sites/project/files/src/SomeProjectsName/SomeProjectsNameFrontendBundle/Controller/CreateController.php`
This should be displayed within the width of the `h1`.
Using CSS `word-break: break-all;`.
Commits
-------
8dc78bd [Form] Fixed YODA issues
600cec7 [Form] Added missing entries to CHANGELOG and UPGRADE
b154f7c [Form] Fixed docblock and unneeded use statement
399af27 [Form] Implemented checks to assert that values and indices generated in choice lists match their requirements
5f6f75c [Form] Fixed outstanding issues mentioned in the PR
7c70976 [Form] Fixed text in UPGRADE file
c26b47a [Form] Made query parameter name generated by ORMQueryBuilderLoader unique
18f92cd [Form] Fixed double choice fixing
f533ef0 [Form] Added ChoiceView class for passing choice-related data to the view
d72900e [Form] Incorporated changes suggested in PR comments
28d2f6d Removed duplicated lines from UPGRADE file
e1fc5a5 [Form] Restricted form names to specific characters to (1) fix generation of HTML IDs and to (2) avoid problems with property paths.
87b16e7 [Form] Greatly improved ChoiceListInterface and all of its implementations
Discussion
----------
[Form] Improved ChoiceList implementation and made form naming more restrictive
Bug fix: yes
Feature addition: yes
Backwards compatibility break: **yes**
Symfony2 tests pass: yes
Fixes the following tickets: #2869, #3021, #1919, #3153
Todo: adapt documentation
The changes in this PR are primarily motivated by the fact that invalid form/field names lead to various problems.
1. When a name contains any characters that are not permitted in HTML "id" attributes, these are invalid
2. When a name contains periods ("."), form validation is broken, because they confuse the property path resolution
3. Since choices in expanded choice fields are directly translated to field names, choices applying to either 1. or 2. lead to problems. But choices should be unrestricted.
4. Unless a choice field is not expanded and does not allow multiple selection, it is not possible to use empty strings as choices, which might be desirable in some occasions.
The solution to these problems is to
* Restrict form names to disallow unpermitted characters (solves 1. and 2.)
* Generate integer indices to be stored in the HTML "id" and "name" attributes and map them to the choices (solves 3.). Can be reverted to the old behaviour by setting the option "index_generation" to ChoiceList::COPY_CHOICE
* Generate integer values to be stored in the HTML "value" attribute and map them to the choices (solves 4.). Can be reverted to the old behaviour by setting the option "value_generation" to ChoiceList::COPY_CHOICE
Apart from these fixes, it is now possible to write more flexible choice lists. One of these is `ObjectChoiceList`, which allows to use objects as choices and is bundled in the core. `EntityChoiceList` has been made an extension of this class.
$form = $this->createFormBuilder()
->add('object', 'choice', array(
'choice_list' => new ObjectChoiceList(
array($obj1, $obj2, $obj3, $obj4),
// property path determining the choice label (optional)
'name',
// preferred choices (optional)
array($obj2, $obj3),
// property path for object grouping (optional)
'category',
// property path for value generation (optional)
'id',
// property path for index generation (optional)
'id'
)
))
->getForm()
;
---------------------------------------------------------------------------
by kriswallsmith at 2012-01-19T18:09:09Z
Rather than passing `choices` and a `choice_labels` arrays to the view would it make sense to introduce a `ChoiceView` class and pass one array of objects?
---------------------------------------------------------------------------
by stof at 2012-01-22T15:32:36Z
@bschussek can you update your PR according to the feedback (and rebase it as it conflicts according to github) ?
---------------------------------------------------------------------------
by bschussek at 2012-01-24T00:15:42Z
@kriswallsmith fixed
Fixed all outstanding issues. Would be glad if someone could review again, otherwise this PR is ready to merge.
---------------------------------------------------------------------------
by fabpot at 2012-01-25T15:17:59Z
Is it ready to be merged?
---------------------------------------------------------------------------
by Tobion at 2012-01-25T15:35:50Z
Yes I think so. He said it's ready to be merged when reviewed.
---------------------------------------------------------------------------
by bschussek at 2012-01-26T02:30:36Z
Yes.
---------------------------------------------------------------------------
by bschussek at 2012-01-28T12:39:00Z
Fixed outstanding issues. Ready for merge.
Commits
-------
a52c675 [WebProfilerBundle] Improve the logger panel
Discussion
----------
[WebProfilerBundle] Improve the logger panel
No more need to hit 'refresh'
Commits
-------
b177786 Make twig optimizations configurable
Discussion
----------
optimizations not configurable
Valid option for twig but missing in the configuration. I am currently hardsetting this in my own bundle.
