Commits
-------
3303155 added kernel shutdown before create client, fixed and stashed
Discussion
----------
[FrameworkBundle] WebTestCase createClient doesn't check if static:kernel was already allocated
with this little fix CreateClient shuts down the kernel before booting again.
If you add an echo after the "if" on the line number 38
and run the test you would see that sometime the kernel is not properly umounted.
Bug fix: [no]
Feature addition: [no]
Backwards compatibility break: [no]
Symfony2 tests pass: [yes]
---------------------------------------------------------------------------
by fabpot at 2012-03-29T09:19:07Z
Can you squash your commits before I merge? Thanks.
---------------------------------------------------------------------------
by liuggio at 2012-03-29T10:17:59Z
Done.
Commits
-------
c73748f [HttpFoundation] Added RFC reference to 308
468ad40 [HttpFoundation] Added support for 308 / Permanent Redirect
Discussion
----------
[HttpFoundation] Added support for 308 / Permanent Redirect
Bug fix: no
Feature addition: yes
Backwards compatibility break: no
Symfony2 tests pass: yes (i guess) [![Build Status](https://secure.travis-ci.org/lyrixx/symfony.png?branch=patch-1)](http://travis-ci.org/lyrixx/symfony)
Fixes the following tickets: -
Todo: -
I know this is still a draft, but it is already implemented in Firefox.
See :
- http://tools.ietf.org/html/draft-reschke-http-status-308-07
- https://developer.mozilla.org/en/HTTP/HTTP_response_codes#308
---------------------------------------------------------------------------
by stloyd at 2012-03-29T09:25:20Z
It will be in Firefox... 14!
---------------------------------------------------------------------------
by fabpot at 2012-03-29T09:33:01Z
Like the non RFC 2616 status code, you need to add the RFC number as a comment (or the reference to the draft).
---------------------------------------------------------------------------
by lsmith77 at 2012-03-29T11:58:14Z
can you open a PR for https://github.com/FriendsOfSymfony/FOSRest/blob/master/Util/Codes.php ?
---------------------------------------------------------------------------
by lyrixx at 2012-03-29T12:08:31Z
@lsmith77 : Done. See : https://github.com/FriendsOfSymfony/FOSRest/pull/7 :)
Commits
-------
e4f3fd9 Fixed example code.
Discussion
----------
[Translation] example code did not work.
The example code for Translation did not compile. And the trans() result was void.
Commits
-------
44a7ca1 [FrameworkBundle] added new czech validators translations for the File constraint.
Discussion
----------
[FrameworkBundle] added new czech validators translations for the File c...
...onstraint.
Commits
-------
0bde12c Added some skipifs to prevent fatal errors on missing extensions.
Discussion
----------
Added some skipifs to prevent fatal errors on missing extensions.
2.0 branch is ok, this should fix errors on master.
Commits
-------
dd4d46a add limit to logger explosion
Discussion
----------
add limit to logger explosion
This limit is required to display complete query with e.g. "array" type in it.
ping @willdurand
Commits
-------
d243097 Run built-in server on dev environment
Discussion
----------
Run built-in server on dev environment
Bug fix: yes?
Feature addition: no
Backwards compatibility break: no
Symfony2 tests pass: yes
Change the router of the built-in server command to run on dev environment.
The symfony standard edition doesn't have any `/` route by default (it's only available to dev), so by default, when ran, it gives a `404`, unless you explicitely add the `app_dev.php` front controller to the route.
Also, this server is meant to be run on dev only, so no need to run it with the prod front controller by default.
Commits
-------
15dd17e Simplified CONTENT_ headers retrieval
Discussion
----------
Header bag
Bug fix: yes
Feature addition: no
Backwards compatibility break: no
Symfony2 tests pass: yes (actually no but I think this has nothing to do with this PR...)
Fixes the following tickets: -
Todo: -
Commits
-------
cdba4cf [FrameworkBundle] Change XSD to allow string replacements on session args.
52f7955 [FrameworkBundle] Remove default from gc_* session configuration keys.
749593d [FrameworkBundle] Allow configuration of session garbage collection for session 'keep-alive'.
Discussion
----------
[2.1][FrameworkBundle] Allow configuration of session garbage collection
Bug fix: no
Feature addition: yes
Backwards compatibility break: no
Symfony2 tests pass: yes
Fixes the following tickets: #2171
Todo: -
---------------------------------------------------------------------------
by drak at 2012-03-21T21:56:20Z
@fabpot - this PR is ready for merge. It basically allows configuration of some session ini values that are necessary in controlling the session behaviour.
---------------------------------------------------------------------------
by dlsniper at 2012-03-21T22:57:18Z
@drak shouldn't all the options here: https://github.com/symfony/symfony/blob/master/src/Symfony/Component/HttpFoundation/Session/Storage/NativeSessionStorage.php#L266 be available for configuration, or am I just reading the source wrong and they already are?
In this case should I make a separate PR to cover the rest or could you do it in this one?
---------------------------------------------------------------------------
by fabpot at 2012-03-23T14:56:22Z
@drak: the discussion is the ticket is very interesting and I think it should be part of a cookbook in the documentation. Can you take care of that before I merge this PR? Thanks.
---------------------------------------------------------------------------
by drak at 2012-03-25T15:32:59Z
@fabpot - yes - it's on the todo list. Will update this PR when done.
---------------------------------------------------------------------------
by drak at 2012-03-26T19:45:13Z
@fabpot - this is ready for merging, the documentation is done (the PR is in but I'll tweak it, but no need to wait to merge this PR). I will also add something extra to cookbook (I wrote docs for the component).
Commits
-------
9ef5e95 Add connection name in the propel data collector
Discussion
----------
Add connection name in the propel data collector
Bug fix: no
Feature addition: yes, This will allow to explain a propel query on a specific connection
Backwards compatibility break: no
Symfony2 tests pass: yes
- Require PR propelorm/Propel#315
- Related to PR propelorm/PropelBundle#129
cc @willdurand
---------------------------------------------------------------------------
by willdurand at 2012-03-16T18:17:26Z
@fabpot please, let me merge Propel related PRs before that one, thanks!
---------------------------------------------------------------------------
by willdurand at 2012-03-26T08:38:36Z
@fabpot good to go from my point of view
Commits
-------
b718960 HttpFoundation\HeaderBag Little improvement.
Discussion
----------
[HttpFoundation\HeaderBag] Removed unnecessary anonymous function
---------------------------------------------------------------------------
by vicb at 2012-03-24T16:07:00Z
Related issue: #3294
Commits
-------
10947cb [DoctrineBridge][Security] Fixes bug that prevents repository's refreshUser from being called
Discussion
----------
[Security][DoctrineBridge] Fixes bug that prevents repository's refreshUser from being called
---------------------------------------------------------------------------
by marcw at 2012-02-21T08:46:09Z
Updated. What do you guys think about this patch ?
---------------------------------------------------------------------------
by henrikbjorn at 2012-02-21T08:57:47Z
Isnt this a bit dangerous, the custom repository implementing refreshUser should always be called first right? You wouldnt specify the $property property if your class has custom implementations would you?
---------------------------------------------------------------------------
by marcw at 2012-02-21T09:05:08Z
@henrikbjorn At this time, the refreshUser method is never called from the custom repository, even if you don't specify the "property" property. This patch fixes this.
---------------------------------------------------------------------------
by marcw at 2012-02-21T09:44:06Z
Updated & Squashed.
---------------------------------------------------------------------------
by stof at 2012-02-21T10:03:33Z
@marcw please move the retrieval of the id in the ``else`` block, like in my comment as it is useless to do this logic for the case where the userProviderInterface is implemented (and it will answer to @vicb by making it impossible to write it with elseif)
---------------------------------------------------------------------------
by marcw at 2012-02-21T10:19:06Z
I'm not sure about this, but Isn't the check of the id essential here to ensure that the entity is a persisted one ?
---------------------------------------------------------------------------
by stof at 2012-02-21T10:21:55Z
@marcw if the interface is used, it means that the user wants to do the work himself. So you should really let him do the way he wants. If he does not use the id to refresh the user, he could choose not to include it in the serialized data.
Retrieving the id is needed for the ``find()`` call because we pass the id as argument and so we fail when the serialized data don't contain it
---------------------------------------------------------------------------
by marcw at 2012-02-21T10:33:30Z
@stof Roger that. I'll do the fix.
---------------------------------------------------------------------------
by marcw at 2012-02-21T10:41:58Z
Updated & Squashed, again.
---------------------------------------------------------------------------
by stof at 2012-02-21T11:00:44Z
btw, to answer to your previous question, the exception when retrieving the id does not check if the object is persisted (you need to reach teh DB for this, which is what find() does) but that the id is part of the serialized data to give a better error reporting.
---------------------------------------------------------------------------
by fabpot at 2012-03-07T19:39:33Z
ready to be merged now?
---------------------------------------------------------------------------
by henrikbjorn at 2012-03-08T07:21:37Z
would say so.
---------------------------------------------------------------------------
by dlsniper at 2012-03-25T11:58:34Z
Hi, can this be merged now or not?
Commits
-------
86a3512 [FrameworkBundle] Add support for full URLs to redirect controller
Discussion
----------
[FrameworkBundle] Add support for full URLs to redirect controller
I'd consider this a bugfix since at the moment using an URL just redirects to `/current/pathhttp://example.org`.
Commits
-------
57de69f added an exception for failed processes
Discussion
----------
added an exception for failed processes
---------------------------------------------------------------------------
by Seldaek at 2012-03-19T07:27:56Z
So this is just there to use if you want to throw an exception when a process call failed in your application? It doesn't seem enabled by default, which I think is good anyway.
---------------------------------------------------------------------------
by stof at 2012-03-19T07:44:43Z
@Seldaek yeah, I guess this is a way to make it easier to reuse what he implemented for Assetic first.
---------------------------------------------------------------------------
by fabpot at 2012-03-23T15:08:26Z
How and when do you use such an exception?
---------------------------------------------------------------------------
by schmittjoh at 2012-03-23T17:22:16Z
It's intended for your own code to give you a nice and meaningful error message without having to repeat the same code whereever you are dealing with a Process:
```php
if (0 !== $proc->run()) {
throw new ProcessFailedException($proc);
}
Commits
-------
5ae76f1 [HttpFoundation] Update documentation.
910b5c7 [HttpFoudation] CS, more tests and some optimization.
b0466e8 [HttpFoundation] Refactored BC Session class methods.
84c2e3c [HttpFoundation] Allow flash messages to have multiple messages per type.
Discussion
----------
[2.1][HttpFoundation] Multiple session flash messages
Bug fix: no
Feature addition: yes
Backwards compatibility break: yes, but this already happened in #2583. BC `Session` methods remain unbroken.
Symfony2 tests pass: yes
Fixes the following tickets: #1863
References the following tickets: #2714, #2753, #2510, #2543, #2853
Todo: -
This PR alters flash messages so that it is possible to store more than one message per flash type using the `add()` method or by passing an array of messages to `set()`.
__NOTES ABOUT BC__
This PR maintains BC behaviour with the `Session` class in that the old Symfony 2.0 methods will continue to work as before.
---------------------------------------------------------------------------
by drak at 2012-02-13T06:28:33Z
I think this is ready for review @fabpot @lsmith77
---------------------------------------------------------------------------
by lsmith77 at 2012-02-14T19:30:39Z
the FlashBag vs. AutoExpireFlashBag behavior and setup difference should probably also be explained in the upgrading log
---------------------------------------------------------------------------
by drak at 2012-02-15T04:43:14Z
@lsmith77 Those differences are explained already in the changelog
* Added `FlashBag`. Flashes expire when retrieved by `get()` or `all()`.
This makes the implementation ESI compatible.
* Added `AutoExpireFlashBag` (default) to replicate Symfony 2.0.x auto expire behaviour of messages auto expiring
after one page page load. Messages must be retrived by `get()` or `all()`.
---------------------------------------------------------------------------
by Crell at 2012-02-19T17:35:34Z
Drak asked me to weigh in here with use cases. Drupal currently has a similar session-stored-messaging system in place that I'd like to be able to replace with Flash messages. We frequently have multiple messages within a single request, however, so this change is critical to our being able to do so.
For instance, when saving an article in Drupal there is, by default, a "yay, you saved an article!" type message that gets displayed. If you also have the site configured to send email when a post is updated, you may see a "email notifications sent" message (depending on your access level). If you have a Solr server setup for search, and you're in debug mode, there will also be a "record ID X added to Solr, it should update in 2 minutes" message. And if there's a bug somewhere, you'll also get, as an error message rather than notice message, a "Oops, E_NOTICE on line 54" message.
Form validation is another case. If you have multiple errors in a single form, we prefer to list all of them. So if you screw up 4 times on a form, you may get 4 different error messages showing what you screwed up so you can fix it in one go instead of several.
Now sure, one could emulate that by building a multi-message layer on top of single-layer messages, but, really, why? "One is a special case of many", and there are many many cases where you'll want to post multiple messages. Like, most of Drupal. :-)
---------------------------------------------------------------------------
by lsmith77 at 2012-03-06T20:55:51Z
@fabpot is there any information you still need before merging this? do you want more discussion in which case you might want to take this to the mailing list ..
---------------------------------------------------------------------------
by drak at 2012-03-08T18:54:13Z
Another plus for this PR is that it requires no extra lines of code in templates etc to display the flashes, see https://github.com/symfony/symfony/pull/3267/files#diff-1
---------------------------------------------------------------------------
by drak at 2012-03-15T06:38:21Z
Rebased against current `master`, should be mergeable again..
---------------------------------------------------------------------------
by evillemez at 2012-03-17T03:08:41Z
+1 to this, I have an extended version of HttpFoundation just for this... would love to get rid of it.
Commits
-------
3f2b917 added a configurable extension base class
Discussion
----------
added a configurable extension base class
This is mostly a convenience class which provides first-class integration with the Config/Definition component.
Commits
-------
09054f7 [Validator] Fix switch breaking in max/min length for constraint guesser, when a "Symfony\Component\Validator\Constraints\Type" constraint type is not in numeric types array
Discussion
----------
[Validator] Fix form type guesser
[Validator] Fix switch breaking in max/min length for constraint guesser, when a "Symfony\Component\Validator\Constraints\Type" constraint type is not in numeric types array
---------------------------------------------------------------------------
by vicb at 2012-03-23T14:19:27Z
You're right, thanks for the fix (I did break it !)
Commits
-------
df11e62 [FrameworkBundle] Used $output->write() instead of echo
c3bf479 [FrameworkBundle] Used Process component
cfa2dff [FrameworkBundle] Changed server:run command description
e7d38c1 [FrameworkBundle] Changed PHP version detection (see: #3529)
4a3f6d5 [FrameworkBundle] Removed global variable from router script
519d431 [FrameworkBundle] Fixed built-in server router script
d9a0a17 [FrameworkBundle] Added server:run command
Discussion
----------
[FrameworkBundle] Added server:run command (PHP 5.4 built-in web server)
Bug fix: no
Feature addition: yes
Backwards compatibility break: no
Symfony2 tests pass: [![Build Status](https://secure.travis-ci.org/michal-pipa/symfony.png?branch=server)](http://travis-ci.org/michal-pipa/symfony)
Fixes the following tickets: -
Todo: -
PHP 5.4 comes with [built-in web server](http://www.php.net/manual/en/features.commandline.webserver.php). I've created command which allows to easily run Symfony2 application using this new feature.
Usage:
server:run [-d|--docroot="..."] [-r|--router="..."] [address]
Arguments:
address Address:port (default: 'localhost:8000')
Options:
--docroot (-d) Document root (default: 'web/')
--router (-r) Path to custom router script
Help:
The server:run runs Symfony2 application using PHP built-in web server:
app/console server:run
To change default bind address and port use the address argument:
app/console server:run 127.0.0.1:8080
To change default docroot directory use the --docroot option:
app/console server:run --docroot=htdocs/
If you have custom docroot directory layout, you can specify your own
router script using --router option:
app/console server:run --router=app/config/router.php
See also: http://www.php.net/manual/en/features.commandline.webserver.php
It requires PHP 5.4, otherwise this command will be disabled.
I think that this is very convenient (especially for new users). All you have to do is download Symfony, install vendors and run this command. You don't have to configure "real" web server, in fact any other server is not required. You don't have cache and logs permission problem, because server runs with your local user permissions.
---------------------------------------------------------------------------
by blogsh at 2012-03-06T17:38:10Z
Great feature! I was about to write something like this when I saw that you have already started implementing this :)
Some issues:
1. Missing newlines at the end of the files
2. If I try this server command with the default Symfony Standard Edition Acme demo the links on the main page do not work. The demo link links to "//demo" and the configurator link to "//_configurator". If I go to `localhost:8000/demo` directly the page is rendered as usual and all sub links are generated correctly. I could solve the problem by adding one line:
$_SERVER['SCRIPT_FILENAME'] = 'ANYTHING';
require 'app_dev.php';
I'm not sure where this problem comes from. Do you experience the same behaviour? Otherwise I'll do some more investigations to find the source of the problem.
3 . I think it would be a nice feature if you would generate a router.php based on the setting of the --env flag if no custom router file has been specified. This way it would be easy to switch between dev and prod.
---------------------------------------------------------------------------
by michal-pipa at 2012-03-06T19:00:24Z
@blogsh
> Missing newlines at the end of the files
I've checked and I can see newlines at the end of files. Are you sure about this?
> If I try this server command with the default Symfony Standard Edition Acme demo the links on the main page do not work. The demo link links to "//demo" and the configurator link to "//_configurator". If I go to localhost:8000/demo directly the page is rendered as usual and all sub links are generated correctly. I could solve the problem by adding one line:
>
> $_SERVER['SCRIPT_FILENAME'] = 'ANYTHING';
> require 'app_dev.php';
>
> I'm not sure where this problem comes from. Do you experience the same behaviour? Otherwise I'll do some more investigations to find the source of the problem.
I can reproduce this by changing front controller name from `app.php` to `app_dev.php`. I'll investigate on this.
> I think it would be a nice feature if you would generate a router.php based on the setting of the --env flag if no custom router file has been specified. This way it would be easy to switch between dev and prod.
You can easily change environment specifying front controller in URL. It works exactly the same way as default Apache configuration. This is intended behavior, as it would be misleading if every server had different rewrite rules.
If you really want to change it, then you can write your own router and pass it as a value to `router` option.
---------------------------------------------------------------------------
by blogsh at 2012-03-06T19:13:55Z
Wasn't aware that github omits the trailing white line, sorry.
Normally I use a rather inflexible nginx configuration, so I also wasn't aware of this (rather obvious) trick of changing the url. Thanks for that.
---------------------------------------------------------------------------
by stof at 2012-03-06T22:12:16Z
@blogsh it does not omit it. It displays it in the Linux way where the newline char is part of the line (and so there is a message ``no newline at end of file`` in the diff when it is missing).
---------------------------------------------------------------------------
by michal-pipa at 2012-03-07T07:18:23Z
@blogsh I've fixed router script. Now you can use both front controllers.
---------------------------------------------------------------------------
by michal-pipa at 2012-03-07T07:34:58Z
I've also hardcoded front controller name in router script and removed global variable, as there was no way to unset it.
---------------------------------------------------------------------------
by michal-pipa at 2012-03-13T07:57:04Z
I've used Process component, but now I don't get any stdout output (only stderr).
---------------------------------------------------------------------------
by michal-pipa at 2012-03-13T18:01:58Z
I've replaced `echo` by `$output->write()` and removed `$process` as it was not used actually.
Commits
-------
0c9b2d4 use SecurityContextInterface instead of SecurityContext
Discussion
----------
[2.0][Security] use SecurityContextInterface instead of SecurityContext
see https://github.com/symfony/symfony/pull/3522 (this is a fix for the 2.0 branch)
---------------------------------------------------------------------------
by pminnieur at 2012-03-21T13:25:59Z
*ping* it still missed the 2.0.12 release ...
---------------------------------------------------------------------------
by stof at 2012-03-21T16:41:28Z
@pminnieur you PR has been merged into master, not into 2.0, so it will only be in 2.1
---------------------------------------------------------------------------
by pminnieur at 2012-03-21T16:43:02Z
I know, and this is a second PR for 2.0 branch.