yap-6.3/pl/control.yap

g/*************************************************************************
*									 *
*	 YAP Prolog 							 *
*									 *
*	Yap Prolog was developed at NCCUP - Universidade do Porto	 *
*									 *
* Copyright L.Damas, V.S.Costa and Universidade do Porto 1985-1997	 *
*									 *
**************************************************************************
*									 *
* File:		control.yap						 *
* Last rev:     20/08/09						 *
* mods:									 *
* comments:	control predicates available in yap			 *
*									 *
*************************************************************************/

/** 

@addtogroup YAPControl
@{

*/

:- system_module( '$_control', [at_halt/1,
        b_getval/2,
        break/0,
        call/2,
        call/3,
        call/4,
        call/5,
        call/6,
        call/7,
        call/8,
        call/9,
        call/10,
        call/11,
        call/12,
        call_cleanup/2,
        call_cleanup/3,
        forall/2,
        garbage_collect/0,
        garbage_collect_atoms/0,
        gc/0,
        grow_heap/1,
        grow_stack/1,
        halt/0,
        halt/1,
        if/3,
        ignore/1,
        nb_getval/2,
        nogc/0,
        notrace/1,
        once/1,
        prolog_current_frame/1,
        prolog_initialization/1,
        setup_call_catcher_cleanup/4,
        setup_call_cleanup/3,
        version/0,
        version/1], ['$run_atom_goal'/1,
        '$set_toplevel_hook'/1]).

:- use_system_module( '$_boot', ['$call'/4,
        '$disable_debugging'/0,
        '$do_live'/0,
        '$enable_debugging'/0,
        '$system_catch'/4,
        '$version'/0]).

:- use_system_module( '$_debug', ['$init_debugger'/0]).

:- use_system_module( '$_errors', ['$do_error'/2]).

:- use_system_module( '$_utils', ['$getval_exception'/3]).

:- use_system_module( '$coroutining', [freeze_goal/2]).

/** @pred  once(: _G_) is iso 


Execute the goal  _G_ only once. The predicate is defined by:

~~~~~{.prolog}
 once(G) :- call(G), !.
~~~~~

Note that cuts inside once/1 can only cut the other goals inside
once/1.

 
*/
once(G) :- '$execute'(G), !.

/** @pred  forall(: _Cond_,: _Action_) 


For all alternative bindings of  _Cond_  _Action_ can be
proven. The example verifies that all arithmetic statements in the list
 _L_ are correct. It does not say which is wrong if one proves wrong.

~~~~~{.prolog}
?- forall(member(Result = Formula, [2 = 1 + 1, 4 = 2 * 2]),
                 Result =:= Formula).
~~~~~

 
*/
/** @pred forall(+ _Cond_,+ _Action_) 




For all alternative bindings of  _Cond_  _Action_ can be proven.
The next example verifies that all arithmetic statements in the list
 _L_ are correct. It does not say which is wrong if one proves wrong.

~~~~~
?- forall(member(Result = Formula, [2 = 1 + 1, 4 = 2 * 2]),
                 Result =:= Formula).
~~~~~



*/
forall(Cond, Action) :- \+((Cond, \+(Action))).

/** @pred  ignore(: _Goal_) 


Calls  _Goal_ as once/1, but succeeds, regardless of whether
`Goal` succeeded or not. Defined as:

~~~~~{.prolog}
ignore(Goal) :-
        Goal, !.
ignore(_).
~~~~~

 
*/
ignore(Goal) :- (Goal->true;true).

notrace(G) :-
	 strip_module(G, M, G1),
	 ( '$$save_by'(CP),
	   '$debug_stop'( State ),
	   '$call'(G1, CP, G, M),
	   '$$save_by'(CP2),
	   (CP == CP2 -> ! ; '$debug_state'( NState ), ( true ; '$debug_restart'(NStart), fail ) ),
	   '$debug_restart'( State )
     ;
	'$debug_restart'( State ),
	fail
    ).

/** @pred  if(? _G_,? _H_,? _I_)

Call goal  _H_ once per each solution of goal  _H_. If goal
 _H_ has no solutions, call goal  _I_.

The built-in `if/3` is similar to `->/3`, with the difference
that it will backtrack over the test goal. Consider the following
small data-base:

~~~~~{.prolog}
a(1).        b(a).          c(x).
a(2).        b(b).          c(y).
~~~~~

Execution of an `if/3` query will proceed as follows:

~~~~~{.prolog}
   ?- if(a(X),b(Y),c(Z)).

X = 1,
Y = a ? ;

X = 1,
Y = b ? ;

X = 2,
Y = a ? ;

X = 2,
Y = b ? ;

no
~~~~~

The system will backtrack over the two solutions for `a/1` and the
two solutions for `b/1`, generating four solutions.

Cuts are allowed inside the first goal  _G_, but they will only prune
over  _G_.

If you want  _G_ to be deterministic you should use if-then-else, as
it is both more efficient and more portable.

 
*/
if(X,Y,Z) :-
	yap_hacks:env_choice_point(CP0),
	(
	 CP is '$last_choice_pt',
	 '$call'(X,CP,if(X,Y,Z),M),
	 '$execute'(X),
	 '$clean_ifcp'(CP),
	 '$call'(Y,CP,if(X,Y,Z),M)
	;
	 '$call'(Z,CP,if(X,Y,Z),M)
	).

call(X,A) :- '$execute'(X,A).

call(X,A1,A2) :- '$execute'(X,A1,A2).

/** @pred  call(+ _Closure_,...,? _Ai_,...) is iso 


Meta-call where  _Closure_ is a closure that is converted into a goal by 
appending the  _Ai_ additional arguments. The number of arguments varies 
between 0 and 10.

 
*/
call(X,A1,A2,A3) :- '$execute'(X,A1,A2,A3).

call(X,A1,A2,A3,A4) :- '$execute'(X,A1,A2,A3,A4).

call(X,A1,A2,A3,A4,A5) :- '$execute'(X,A1,A2,A3,A4,A5).

call(X,A1,A2,A3,A4,A5,A6) :- '$execute'(X,A1,A2,A3,A4,A5,A6).

call(X,A1,A2,A3,A4,A5,A6,A7) :- '$execute'(X,A1,A2,A3,A4,A5,A6,A7).

call(X,A1,A2,A3,A4,A5,A6,A7,A8) :- '$execute'(X,A1,A2,A3,A4,A5,A6,A7,A8).

call(X,A1,A2,A3,A4,A5,A6,A7,A8,A9) :- '$execute'(X,A1,A2,A3,A4,A5,A6,A7,A8,A9).

call(X,A1,A2,A3,A4,A5,A6,A7,A8,A9,A10) :- '$execute'(X,A1,A2,A3,A4,A5,A6,A7,A8,A9,A10).

call(X,A1,A2,A3,A4,A5,A6,A7,A8,A9,A10,A11) :- '$execute'(X,A1,A2,A3,A4,A5,A6,A7,A8,A9,A10,A11).

/** @pred call_cleanup(: _Goal_, : _CleanUpGoal_)

This is similar to <tt>call_cleanup/1</tt> with an additional
 _CleanUpGoal_ which gets called after  _Goal_ is finished.

 
*/
call_cleanup(Goal, Cleanup) :-
	setup_call_catcher_cleanup(true, Goal, _Catcher, Cleanup).

call_cleanup(Goal, Catcher, Cleanup) :-
	setup_call_catcher_cleanup(true, Goal, Catcher, Cleanup).

/** @pred setup_call_cleanup(: _Setup_,: _Goal_, : _CleanUpGoal_) 


Calls `(Setup, Goal)`. For each sucessful execution of  _Setup_, calling  _Goal_, the
cleanup handler  _Cleanup_ is guaranteed to be called exactly once.
This will happen after  _Goal_ completes, either through failure,
deterministic success, commit, or an exception.   _Setup_ will
contain the goals that need to be protected from asynchronous interrupts
such as the ones received from `call_with_time_limit/2` or thread_signal/2.  In
most uses,  _Setup_ will perform temporary side-effects required by
 _Goal_ that are finally undone by  _Cleanup_.

Success or failure of  _Cleanup_ is ignored and choice-points it
created are destroyed (as once/1). If  _Cleanup_ throws an exception,
this is executed as normal.

Typically, this predicate is used to cleanup permanent data storage
required to execute  _Goal_, close file-descriptors, etc. The example
below provides a non-deterministic search for a term in a file, closing
the stream as needed.

~~~~~{.prolog}
term_in_file(Term, File) :-
    setup_call_cleanup(open(File, read, In),
               term_in_stream(Term, In),
               close(In) ).

term_in_stream(Term, In) :-
    repeat,
    read(In, T),
    (   T == end_of_file
    ->  !, fail
    ;   T = Term
    ).
~~~~~

Note that it is impossible to implement this predicate in Prolog other than
by reading all terms into a list, close the file and call member/2.
Without setup_call_cleanup/3 there is no way to gain control if the
choice-point left by `repeat` is removed by a cut or an exception.

`setup_call_cleanup/2` can also be used to test determinism of a goal:

~~~~~
?- setup_call_cleanup(true,(X=1;X=2), Det=yes).

X = 1 ;

X = 2,
Det = yes ;
~~~~~

This predicate is under consideration for inclusion into the ISO standard.
For compatibility with other Prolog implementations see `call_cleanup/2`.

 
*/
setup_call_cleanup(Setup, Goal, Cleanup) :-
	setup_call_catcher_cleanup(Setup, Goal, _Catcher, Cleanup).

/** @pred setup_call_catcher_cleanup(: _Setup_,: _Goal_, + _Catcher_,: _CleanUpGoal_) 


Similar to `setup_call_cleanup( _Setup_,  _Goal_,  _Cleanup_)` with
additional information on the reason of calling  _Cleanup_.  Prior
to calling  _Cleanup_,  _Catcher_ unifies with the termination
code.  If this unification fails,  _Cleanup_ is
 *not* called.

 
*/
setup_call_catcher_cleanup(Setup, Goal, Catcher, Cleanup) :-
	yap_hacks:disable_interrupts,
	'$check_goal_for_setup_call_cleanup'(Setup, setup_call_cleanup(Setup, Goal, Cleanup)),
	catch('$do_setup'(Setup),Exception,'$handle_broken_setup'(Exception)),
	'$check_goal_for_setup_call_cleanup'(Cleanup, setup_call_cleanup(Setup, Goal, Cleanup)),
	'$safe_call_cleanup'(Goal,Cleanup,Catcher,Exception).

% make sure we don't lose interrupts if we get exceptions
% with setup.
'$handle_broken_setup'(Exception) :-
	yap_hacks:enable_interrupts,
	throw(Exception).

'$check_goal_for_setup_call_cleanup'(Goal, G) :-
	strip_module(Goal, _, MG),
	(
	 var(MG)
	->
	 yap_hacks:enable_interrupts,
	 '$do_error'(instantiation_error,G)
	;
	 true
	).

% this is simple, do nothing
'$do_setup'(A:true) :- atom(A), !.
% this is tricky: please don't forget that interrupts are disabled at this point
% and that they will only be enabled after setting up Cleanup
'$do_setup'(Setup) :-
	(
	 '$execute'(Setup),
	 % we don't need to care about enabling interrupts
	 !
	;
	 % reenable interrupts if Setup failed
	 yap_hacks:enable_interrupts,
	 fail
	).
	 

'$cleanup_exception'(Exception, exception(Exception), Cleanup) :- !,
	% whatever happens, let exception go through 
	catch('$clean_call'(_,Cleanup),_,true),
	throw(Exception).
'$cleanup_exception'(Exception, _, _) :-
	throw(Exception).

'$safe_call_cleanup'(Goal, Cleanup, Catcher, Exception) :-
	'$current_choice_point'(MyCP1),
	'$coroutining':freeze_goal(Catcher, '$clean_call'(Active, Cleanup)),
	(
	 yap_hacks:trail_suspension_marker(Catcher),
	 yap_hacks:enable_interrupts,
	 '$current_choice_point'(CP0),
	 '$execute'(Goal),
	 '$current_choice_point'(CPF),
	 (
	  CP0 =:= CPF
	 ->
	  Catcher = exit,
	  !
	 ;
	  true
	 )
	;
	 Catcher = fail,
	 fail
	).

'$holds_true'.

% The first argument is used by JumpEnv to verify if a throw
% is going to be handled by the cleanup catcher. If it is so,
% clean_call will not be called from JumpToEnv.
'$clean_call'(_, Cleanup) :-
	'$execute'(Cleanup), !.
'$clean_call'(_, _).

'$cc_check_throw' :-
	'$nb_getval'('$catch', Ball, fail),
	throw(Ball).	

/** @pred  call_with_args(+ _Name_,...,? _Ai_,...) 


Meta-call where  _Name_ is the name of the procedure to be called and
the  _Ai_ are the arguments. The number of arguments varies between 0
and 10. New code should use `call/N` for better portability.

If  _Name_ is a complex term, then call_with_args/n behaves as
call/n:

~~~~~{.prolog}
call(p(X1,...,Xm), Y1,...,Yn) :- p(X1,...,Xm,Y1,...,Yn).
~~~~~

 
*/

%%% Some "dirty" predicates

% Only efective if yap compiled with -DDEBUG
% this predicate shows the code produced by the compiler
'$show_code' :- '$debug'(0'f). %' just make emacs happy

/** @pred  grow_heap(+ _Size_) 
Increase heap size  _Size_ kilobytes.

 
*/
grow_heap(X) :- '$grow_heap'(X).
/** @pred  grow_stack(+ _Size_) 


Increase stack size  _Size_ kilobytes


 */
grow_stack(X) :- '$grow_stack'(X).

%
% gc() expects to be called from "call". Make sure it has an
% environment to return to.
%
%garbage_collect :- save(dump), '$gc',  save(dump2).
/** @pred  garbage_collect 


The goal `garbage_collect` forces a garbage collection.

 
*/
garbage_collect :-
	'$gc'.
/** @pred  gc 


The goal `gc` enables garbage collection. The same as
`yap_flag(gc,on)`.

 
*/
gc :-
	yap_flag(gc,on).
/** @pred  nogc 


The goal `nogc` disables garbage collection. The same as
`yap_flag(gc,off)`.

 
*/
nogc :-
	yap_flag(gc,off).

/** @pred  garbage_collect_atoms 


The goal `garbage_collect` forces a garbage collection of the atoms
in the data-base. Currently, only atoms are recovered.

 
*/
garbage_collect_atoms :-
	'$atom_gc'.

'$force_environment_for_gc'.

'$good_list_of_character_codes'(V) :- var(V), !.
'$good_list_of_character_codes'([]).
'$good_list_of_character_codes'([X|L]) :-
	'$good_character_code'(X),
	'$good_list_of_character_codes'(L).

'$good_character_code'(X) :- var(X), !.
'$good_character_code'(X) :- integer(X), X > -2, X < 256.

/** @pred prolog_initialization( _G_) 


Add a goal to be executed on system initialization. This is compatible
with SICStus Prolog's initialization/1.

 
*/
prolog_initialization(G) :- var(G), !,
	'$do_error'(instantiation_error,initialization(G)).
prolog_initialization(T) :- callable(T), !,
	'$assert_init'(T).
prolog_initialization(T) :-
	'$do_error'(type_error(callable,T),initialization(T)).

'$assert_init'(T) :- recordz('$startup_goal',T,_), fail.
'$assert_init'(_).

/** @pred version

Write YAP's boot message. 

 
*/
version :- '$version'.

/** @pred version(- _Message_)

Add a message to be written when yap boots or after aborting. It is not
possible to remove messages.

 
*/
version(V) :- var(V),  !,
	'$do_error'(instantiation_error,version(V)).
version(T) :- atom(T), !, '$assert_version'(T).
version(T) :-
	'$do_error'(type_error(atom,T),version(T)).

'$assert_version'(T) :- recordz('$version',T,_), fail.
'$assert_version'(_).

'$set_toplevel_hook'(_) :- 
	recorded('$toplevel_hooks',_,R),
	erase(R),
	fail.
'$set_toplevel_hook'(H) :- 
	recorda('$toplevel_hooks',H,_),
	fail.
'$set_toplevel_hook'(_).

/** @pred  nb_getval(+ _Name_, - _Value_)  


The nb_getval/2 predicate is a synonym for b_getval/2,
introduced for compatibility and symmetry. As most scenarios will use
a particular global variable either using non-backtrackable or
backtrackable assignment, using nb_getval/2 can be used to
document that the variable is used non-backtrackable.

 
*/
/** @pred nb_getval(+ _Name_,- _Value_) 


The nb_getval/2 predicate is a synonym for b_getval/2, introduced for
compatibility and symmetry.  As most scenarios will use a particular
global variable either using non-backtrackable or backtrackable
assignment, using nb_getval/2 can be used to document that the 
variable is used non-backtrackable.

 
*/
nb_getval(GlobalVariable, Val) :-
	'$nb_getval'(GlobalVariable, Val, Error),
	(var(Error)
	->
	 true
	;
	 '$getval_exception'(GlobalVariable, Val, nb_getval(GlobalVariable, Val)) ->
	 nb_getval(GlobalVariable, Val)
	;
	 '$do_error'(existence_error(variable, GlobalVariable),nb_getval(GlobalVariable, Val))
	).
		    

/** @pred  b_getval(+ _Name_, - _Value_)  


Get the value associated with the global variable  _Name_ and unify
it with  _Value_. Note that this unification may further
instantiate the value of the global variable. If this is undesirable
the normal precautions (double negation or copy_term/2) must be
taken. The b_getval/2 predicate generates errors if  _Name_ is not
an atom or the requested variable does not exist. 

Notice that for compatibility with other systems  _Name_ <em>must</em> be already associated with a term: otherwise the system will generate an error.

 
*/
/** @pred b_getval(+ _Name_,- _Value_) 


Get the value associated with the global variable  _Name_ and unify
it with  _Value_. Note that this unification may further instantiate
the value of the global variable. If this is undesirable the normal
precautions (double negation or copy_term/2) must be taken. The
b_getval/2 predicate generates errors if  _Name_ is not an atom or
the requested variable does not exist.

 
*/
b_getval(GlobalVariable, Val) :-
	'$nb_getval'(GlobalVariable, Val, Error),
	(var(Error)
	->
	 true
	;
	 '$getval_exception'(GlobalVariable, Val, b_getval(GlobalVariable, Val)) ->
	 true
	;
	 '$do_error'(existence_error(variable, GlobalVariable),b_getval(GlobalVariable, Val))
	).


/* This is the break predicate,
	it saves the importante data about current streams and
	debugger state */

'$debug_state'(state(Trace, Debug, Jump, Run, SPY_GN, GList)) :-
	'$init_debugger',
	nb_getval('$trace',Trace),
	nb_getval('$debug_jump',Jump),
	nb_getval('$debug_run',Run),
	'$swi_current_prolog_flag'(debug, Debug),
	nb_getval('$spy_gn',SPY_GN),
	b_getval('$spy_glist',GList).


'$debug_stop'( State ) :-
        '$debug_state'( State ),
	b_setval('$trace',off),
	'$swi_set_prolog_flag'(debug, false),
	b_setval('$spy_glist',[]),
	'$disable_debugging'.

'$debug_restart'(state(Trace, Debug, Jump, Run, SPY_GN, GList)) :- 
	b_setval('$spy_glist',GList),
	b_setval('$spy_gn',SPY_GN),
	'$swi_set_prolog_flag'(debug, Debug),
	b_setval('$debug_jump',Jump),
	b_setval('$debug_run',Run),
	b_setval('$trace',Trace),
	'$enable_debugging'.

/** @pred  break 


Suspends the execution of the current goal and creates a new execution
level similar to the top level, displaying the following message:

~~~~~{.prolog}
 [ Break (level <number>) ]
~~~~~
telling the depth of the break level just entered. To return to the
previous level just type the end-of-file character or call the
end_of_file predicate.  This predicate is especially useful during
debugging.

 
*/
break :-
	'$init_debugger',
	nb_getval('$trace',Trace),
	nb_setval('$trace',off),
	nb_getval('$debug_jump',Jump),
	nb_getval('$debug_run',Run),
	'$swi_current_prolog_flag'(debug, Debug),
	'$swi_set_prolog_flag'(debug, false),
	'$break'( true ),
	nb_getval('$spy_gn',SPY_GN),
	b_getval('$spy_glist',GList),
	b_setval('$spy_glist',[]),
	current_output(OutStream), current_input(InpStream),
	'$swi_current_prolog_flag'(break_level, NBL ),
	format(user_error, '% Break (level ~w)~n', [NBL]),
	'$do_live',
	!,
	set_value('$live','$true'),
	b_setval('$spy_glist',GList),
	nb_setval('$spy_gn',SPY_GN),
	set_input(InpStream), 
	set_output(OutStream),
	'$swi_set_prolog_flag'(debug, Debug),
	nb_setval('$debug_jump',Jump),
	nb_setval('$debug_run',Run),
	nb_setval('$trace',Trace),
	'$break'( false ).


at_halt(G) :-
	recorda('$halt', G, _),
	fail.
at_halt(_).

/** @pred  halt is iso 


Halts Prolog, and exits to the calling application. In YAP,
halt/0 returns the exit code `0`.

 
*/
halt :-
	print_message(informational, halt),
	fail.
halt :-
	'$halt'(0).

/** @pred  halt(+  _I_) is iso

Halts Prolog, and exits to the calling application returning the code
given by the integer  _I_.

 
*/
halt(_) :-
	recorded('$halt', G, _),
	call(G),
	fail.
halt(X) :-
	'$sync_mmapped_arrays',
	set_value('$live','$false'),
	'$halt'(X).

prolog_current_frame(Env) :-
	Env is '$env'.

'$run_atom_goal'(GA) :-
	'$current_module'(Module),
	atom_to_term(GA, G, _),
	'$system_catch'('$query'(once(G), []),Module,Error,user:'$Error'(Error)).

'$add_dot_to_atom_goal'([],[0'.]) :- !. %'
'$add_dot_to_atom_goal'([0'.],[0'.]) :- !.
'$add_dot_to_atom_goal'([C|Gs0],[C|Gs]) :-
	'$add_dot_to_atom_goal'(Gs0,Gs).

/**
@}
*/