BEAM How-to-get-started This document gives you an introduction on how to use the EAM withing YAP. We start by explaining how to prepare YAP to use the EAM. Then we present some code examples that you can use to try out the EAM. WARNING: THE BEAM WITHING YAP IS STILL IN EARLY DEVELOPMENT, SO DON'T EXPECT IT TO RUN SMOOTHLY... WE ARE WORKING TO IMPROVE THE INTEGRATION OF BEAM WITHIN YAP, BUT THIS THINGS TAKE TIME. SO PLEASE BE PATIENT... --------------------------------------------------------------------------- 1. Compiling Yap to support the EAM. --------------------------------------------------------------------------- If you want to use the BEAM prototype you must compile YAP using the flag --enable-eam tar -xvzf yapfile.tar.gz <- will extract yap to $YAPDIR mkdir tmp cd tmp ../YAPDIR/configure --enable-eam <- prepare yap to compilation make <- compile yap su <- enter as root make install <- install yap You are now ready to try YAP-BEAM. Just run "yap" on the command line. --------------------------------------------------------------------------- 2. Quick start + Examples... --------------------------------------------------------------------------- Quick example on how to run a Prolog program using the EAM. First you must enable the EAM using the comand ?- eam. yes then you should load your program, and make your queries using ?- eam(query). You can write the query normally as in normal Prolog mode, but in this case you will only receive the first solution (or yes or no). Small example: Supose that you have the file Example.pl with the Prolog code: f(1). f(2). f(3). Here is an execution example: [user]$ ./yap % Restoring file /.../startup YAP version Yap-5.0.0 ?- eam. yes ?- [t]. % consulting /.../t.pl... % consulted /.../t.pl in module user, 1 msec 1328 bytes yes ?- eam(f(X)). [ EAM execution started to solve f/1 ] X = 1 ? ; X = 2 ? ; X = 3 ? ; no ?- f(X). [ EAM execution started to solve f/1 ] X = 1 ? ; no ?- --------------------------------------------------------------------------- A first example: You can try out the next example, the well-known benchmark scanner.pl that behaves badly in standard Prolog systems. Just run the demos... (demo1, demo2, demo3 or demo4). Remember to enable the EAM before loading the program. After running the examples, try restarting YAP and loading the program without the EAM enabled. Try to run the demo4... :) demo1:- demo(tiny). demo2:- demo(small). demo3:- demo(data). demo4:- demo(snake). demo(Data):- scannerdata(Data,R,C,D1,D2), write('Rows '), write(R),nl, write('Columns '), write(C),nl, write('Left diagonals '), write(D1),nl, write('Right diagonals '), write(D2),nl,nl, scanner(R,C,D1,D2,Image), !, displi(Image). sequence(Spec):- samples(Spec,Samples), cat(Samples,Images), !, displ(Images). samples([],Samples):- !, Samples=[]. samples([S|Spec],Samples):- !, scannerdata(S,R,C,D1,D2), Samples=[sample(R,C,D1,D2)|Smpls], samples(Spec,Smpls). cat([],Images):- !, Images=[]. cat([Sample|Samples], Images):- !, image(Sample,Image), Images=[Image|Imgs], cat(Samples,Imgs). image(sample(R,C,D1,D2), Image):- scanner(proc,R,C,D1,D2,I), !, Image=I. displ([]):- nl, nl. displ([I|Imgs]):- nl, displi(I), nl, displ(Imgs). displi([]):- nl . displi([R|Rws]):- write(' '),displr(R), displi(Rws). displr([]):- nl. displr([on|R]):- write('X '), displr(R). displr([off|R]):- write('_ '), displr(R). scannerdata(tiny, [1,1],[2,0],[1,1,0],[0,1,1]). scannerdata(small, [1,2,1],[2,1,1],[1,1,1,0,1],[0,0,3,1,0]). scannerdata(double, [2,2,3,2,2,1], [1,3,3,1,3,1], [0,1,1,2,1,2,3,1,1,0,0], [0,2,0,1,2,2,2,1,2,0,0]). scannerdata(snake, [4,2,6,2,4,4,3,2], [3,5,5,3,2,3,3,3], [1,2,2,1,1,2,5,2,2,3,3,2,1,0,0], [0,1,0,3,2,2,4,3,3,3,1,3,2,0,0]). scanner(RwData,ClData,D1Data, D2Data, Rws):- llength(RwData,R), llength(ClData,C), board(R,C,All,Rws,Cls,D1,D2), check(RwData,Rws), check(ClData,Cls), check(D1Data,D1), check(D2Data,D2). pixle(on). pixle(off). check([],[]). check([K|RwsD],[R|Rws]):- llength(R,L), line(K,L,R), check(RwsD,Rws). line(0,0,[]). line(K,L,[on|R]):- K > 0, K1 is K - 1, L1 is L - 1, line(K1,L1,R). line(K,L,[off|R]):- L > K, L1 is L - 1, line(K,L1,R). board(0,C,[],[],Cls,D,D):- C > 0, C1 is C - 1, seed(C,Cls), seed(C1,D). board(R,C,All,[Row|Rws],Cols,Rdiag,Ldiag):- R > 0, R1 is R - 1, row(C, Row), all2(Row,Al,All), column(Row,Cls,Cols), diagonal(Row,Rdg,Rdiag), rev(Row,[],Rev), diagonal(Rev,Ldg,Ldiag), board(R1,C,Al,Rws,Cls,Rdg,Ldg). seed(0,[]). seed(C,[[]|S1]):- C > 0, C1 is C -1 , seed(C1,S1). all2([],Al,Al). all2([H|Row],Al,[H|All]):- all2(Row,Al,All). row(0,[]). row(C,[_|R]):- C > 0, C1 is C -1, row(C1,R). column([],X,X). column([H|R],[Cl|Cls],[[H|Cl]|Columns]):- column(R,Cls,Columns). diagonal([H|Row],Dg, [[H]|Diag]):- column(Row,Dg,Diag). rev([],Y,Y). rev([H|T],Y,Z):- rev(T,[H|Y],Z). llength([],0). llength([A|R],N):- llength(R,M), N is M+1. --------------------------------------------------------------------------- Another example: The famours queens... Try to evaluate in normal Prolog que query: ?- queens([1,2,3,4,5,6,7,8,9,10,11,12,13,14,15],X). Now quit YAP and enable eam before loading the queens program Here is the code for you to try it: demo1:- queens([1,2,3,4,5,6,7,8,9],L), write(L), nl, fail. demo2:- queens([1,2,3,4,5,6,7,8,9,10,11,12,13,14,15],L), write(L), nl. queens(L,C):- perm(L,P), pair(L,P,C), safe([],C). perm([],[]). perm(Xs,[Z|Zs]):- select(Z,Xs,Ys), perm(Ys,Zs). select(X,[X|Xs],Xs). select(X,[Y|Ys],[Y|Zs]):- select(X,Ys,Zs). pair([],[],[]). pair([X|Y],[U|V],[p(X,U)|W]):- pair(Y,V,W). safe(X,[]). safe(X,[Q|R]):- test(X,Q), safe([Q|X],R). test([],X). test([p(C1,R1)|S],p(C2,R2)):- test(S,p(C2,R2)), nd(p(C1,R1),p(C2,R2)). nd(p(C1,R1),p(C2,R2)):- wait_while_var([C1,C2,R1,R2]), C is C1-C2, R is R1-R2, C=\=R, NR is R2-R1, C=\=NR. Note that on the nd predicate, we have used wait_while_var to force the EAM to wait while C1, C2, R1, R2 are not bound, because the operations in this predicate can't be done with those variables unbound. --------------------------------------------------------------------------- 3. Some notes... --------------------------------------------------------------------------- - BEAM create the indexing code (try, retry and trust) only considering the first argument and only when the predicates are first called. So the first time you run a query there can be a slowdown, because the EAM is indexing the code. --------------------------------------------------------------------------- - A lot of builtins/code are not yet supported... For example var(X), not , ; (or), ... You will have a internal compiler error for these cases. and the clause that uses the builtin/code not supported will always fail. Example: consider the code: tst(X):- var(X), X=1. tst(2). You will receive a warning that there is unsupported code. Although you can still use the tst predicate, the first alternative will always fail... ?- tst(X). [ EAM execution started to solve tst/1 ] X = 2 ? ; no --------------------------------------------------------------------------- - The EAM prefers deterministic instead of non-deterministic. and thus can change the order of goals of your code to delay non-deterministic bindings. So, you must be careful when using builtins that have side-effects, or that may expect variables to be bound. For example, supose that you have the following Prolog code: f(1). f(2). tst(Y):- f(X), Y is X+1. Normal prolog would be fine, but the EAM can not execute this code correctly because since f(X) is non-deterministic, Y is X+1 is executed before X being bound. The result would be: ?- tst(X). [ EAM execution started to solve tst/1 ] % INSTANTIATION ERROR- in arithmetic at user:tst/1 (clause 1): expected bound value The solution for this case is to force the EAM to wait for X to be bound. So the code correct code would be: tst(Y):- f(X), skip_while_var(X), Y is X+1. That means that the code Y is X+1 should be skipped while X is var. Note that in this case there is no more after Y is X+1. If there were, execution would continue on that code. Another alternative is to use: tst(Y):- f(X), wait_while_var(X), Y is X+1. that means what execution can not proceed while X is not bound. --------------------------------------------------------------------------- - To support the EAM within the YAP the WAM compilation was specially the classification of permanent variables. This code was adapted from the initial BEAM implementation and is not yet completed. I've have already discover some code examples where the variables should are not being classified as permanent, and as result the BEAM returns false solutions. We are also working on this problem... --------------------------------------------------------------------------- Expect more info soon... ...