/*************************************************************************
* *
* YAP Prolog *
* *
* Yap Prolog was developed at NCCUP - Universidade do Porto *
* *
* Copyright L.Damas, V.S.Costa and Universidade do Porto 1985-1997 *
* *
**************************************************************************
* *
* File: debug.pl *
* Last rev: *
* mods: *
* comments: YAP debugger *
* *
*************************************************************************/
:- system_module( '$_debug', [debug/0,
debugging/0,
leash/1,
nodebug/0,
(nospy)/1,
nospyall/0,
notrace/0,
(spy)/1,
trace/0], ['$do_spy'/4,
'$init_debugger'/0,
'$skipeol'/1]).
:- use_system_module( '$_boot', ['$find_goal_definition'/4,
'$system_catch'/4]).
:- use_system_module( '$_errors', ['$Error'/1,
'$do_error'/2]).
:- use_system_module( '$_init', ['$system_module'/1]).
:- use_system_module( '$_modules', ['$meta_expansion'/6]).
:- use_system_module( '$_preds', ['$clause'/4]).
/*-----------------------------------------------------------------------------
Debugging / creating spy points
-----------------------------------------------------------------------------*/
/** @defgroup Deb_Preds Debugging Predicates
@ingroup builtins
@{
The
following predicates are available to control the debugging of
programs:
+ debug
Switches the debugger on.
+ debugging
Outputs status information about the debugger which includes the leash
mode and the existing spy-points, when the debugger is on.
+ nodebug
Switches the debugger off.
*/
:- op(900,fx,[spy,nospy]).
'$init_debugger' :-
'$nb_getval'('$trace', _, fail), !.
'$init_debugger' :-
nb_setval('$trace',off),
nb_setval('$if_skip_mode',no_skip),
nb_setval('$spy_glist',[]),
nb_setval('$spy_gn',1),
nb_setval('$debug_run',off),
nb_setval('$debug_jump',false).
% First part : setting and reseting spy points
% $suspy does most of the work
'$suspy'(V,S,M) :- var(V) , !,
'$do_error'(instantiation_error,M:spy(V,S)).
'$suspy'((M:S),P,_) :- !,
'$suspy'(S,P,M).
'$suspy'([],_,_) :- !.
'$suspy'([F|L],S,M) :- !, ( '$suspy'(F,S,M) ; '$suspy'(L,S,M) ).
'$suspy'(F/N,S,M) :- !,
functor(T,F,N),
'$do_suspy'(S, F, N, T, M).
'$suspy'(A,S,M) :- atom(A), !,
'$suspy_predicates_by_name'(A,S,M).
'$suspy'(P,spy,M) :- !,
'$do_error'(domain_error(predicate_spec,P),spy(M:P)).
'$suspy'(P,nospy,M) :-
'$do_error'(domain_error(predicate_spec,P),nospy(M:P)).
'$suspy_predicates_by_name'(A,S,M) :-
% just check one such predicate exists
(
current_predicate(A,M:_)
->
M = EM,
A = NA
;
recorded('$import','$import'(EM,M,GA,_,A,_),_),
functor(GA,NA,_)
),
!,
'$do_suspy_predicates_by_name'(NA,S,EM).
'$suspy_predicates_by_name'(A,spy,M) :- !,
print_message(warning,no_match(spy(M:A))).
'$suspy_predicates_by_name'(A,nospy,M) :-
print_message(warning,no_match(nospy(M:A))).
'$do_suspy_predicates_by_name'(A,S,M) :-
current_predicate(A,M:T),
functor(T,A,N),
'$do_suspy'(S, A, N, T, M).
'$do_suspy_predicates_by_name'(A, S, M) :-
recorded('$import','$import'(EM,M,_,T,A,N),_),
'$do_suspy'(S, A, N, T, EM).
%
% protect against evil arguments.
%
'$do_suspy'(S, F, N, T, M) :-
recorded('$import','$import'(EM,M,T0,_,F,N),_), !,
functor(T0, F0, N0),
'$do_suspy'(S, F0, N0, T, EM).
'$do_suspy'(S, F, N, T, M) :-
'$undefined'(T,M), !,
( S = spy ->
print_message(warning,no_match(spy(M:F/N)))
;
print_message(warning,no_match(nospy(M:F/N)))
).
'$do_suspy'(S, F, N, T, M) :-
'$system_predicate'(T,M),
'$flags'(T,M,F,F),
F /\ 0x118dd080 =\= 0,
( S = spy ->
'$do_error'(permission_error(access,private_procedure,T),spy(M:F/N))
;
'$do_error'(permission_error(access,private_procedure,T),nospy(M:F/N))
).
'$do_suspy'(S, F, N, T, M) :-
'$undefined'(T,M), !,
( S = spy ->
print_message(warning,no_match(spy(M:F/N)))
;
print_message(warning,no_match(nospy(M:F/N)))
).
'$do_suspy'(S,F,N,T,M) :-
'$suspy2'(S,F,N,T,M).
'$suspy2'(spy,F,N,T,M) :-
recorded('$spy','$spy'(T,M),_), !,
print_message(informational,breakp(bp(debugger,plain,M:T,M:F/N,N),add,already)).
'$suspy2'(spy,F,N,T,M) :- !,
recorda('$spy','$spy'(T,M),_),
'$set_spy'(T,M),
print_message(informational,breakp(bp(debugger,plain,M:T,M:F/N,N),add,ok)).
'$suspy2'(nospy,F,N,T,M) :-
recorded('$spy','$spy'(T,M),R), !,
erase(R),
'$rm_spy'(T,M),
print_message(informational,breakp(bp(debugger,plain,M:T,M:F/N,N),remove,last)).
'$suspy2'(nospy,F,N,_,M) :-
print_message(informational,breakp(no,breakpoint_for,M:F/N)).
'$pred_being_spied'(G, M) :-
recorded('$spy','$spy'(G,M),_), !.
/**
@pred spy( + _P_ ).
Sets spy-points on all the predicates represented by
_P_. _P_ can either be a single specification or a list of
specifications. Each one must be of the form _Name/Arity_
or _Name_. In the last case all predicates with the name
_Name_ will be spied. As in C-Prolog, system predicates and
predicates written in C, cannot be spied.
*/
spy Spec :-
'$init_debugger',
prolog:debug_action_hook(spy(Spec)), !.
spy L :-
'$current_module'(M),
'$suspy'(L, spy, M), fail.
spy _ :- debug.
/** @pred nospy( + _P_ )
Removes spy-points from all predicates specified by _P_.
The possible forms for _P_ are the same as in `spy P`.
*/
nospy Spec :-
'$init_debugger',
prolog:debug_action_hook(nospy(Spec)), !.
nospy L :-
'$current_module'(M),
'$suspy'(L, nospy, M), fail.
nospy _.
/** @pred nospyall
Removes all existing spy-points.
*/
nospyall :-
'$init_debugger',
prolog:debug_action_hook(nospyall), !.
nospyall :-
recorded('$spy','$spy'(T,M),_), functor(T,F,N), '$suspy'(F/N,nospy,M), fail.
nospyall.
% debug mode -> debug flag = 1
debug :-
'$init_debugger',
( nb_getval('$spy_gn',_) -> true ; nb_setval('$spy_gn',1) ),
'$start_debugging'(on),
print_message(informational,debug(debug)).
'$start_debugging'(Mode) :-
(Mode == on ->
'$swi_set_prolog_flag'(debug, true)
;
'$swi_set_prolog_flag'(debug, false)
),
nb_setval('$debug_run',off),
nb_setval('$debug_jump',false).
nodebug :-
'$init_debugger',
'$swi_set_prolog_flag'(debug, false),
nb_setval('$trace',off),
print_message(informational,debug(off)).
%
% remove any debugging info after an abort.
%
/** @pred trace
Switches on the debugger and enters tracing mode.
*/
trace :-
'$init_debugger',
'$nb_getval'('$trace', on, fail), !.
trace :-
nb_setval('$trace',on),
'$start_debugging'(on),
print_message(informational,debug(trace)),
'$creep'.
/** @pred notrace
Ends tracing and exits the debugger. This is the same as
nodebug/0.
*/
notrace :-
'$init_debugger',
nodebug.
/*-----------------------------------------------------------------------------
leash
-----------------------------------------------------------------------------*/
/** @pred leash(+ _M_)
Sets leashing mode to _M_.
The mode can be specified as:
+ `full`
prompt on Call, Exit, Redo and Fail
+ `tight`
prompt on Call, Redo and Fail
+ `half`
prompt on Call and Redo
+ `loose`
prompt on Call
+ `off`
never prompt
+ `none`
never prompt, same as `off`
The initial leashing mode is `full`.
The user may also specify directly the debugger ports
where he wants to be prompted. If the argument for leash
is a number _N_, each of lower four bits of the number is used to
control prompting at one the ports of the box model. The debugger will
prompt according to the following conditions:
+ if `N/\ 1 =\= 0` prompt on fail
+ if `N/\ 2 =\= 0` prompt on redo
+ if `N/\ 4 =\= 0` prompt on exit
+ if `N/\ 8 =\= 0` prompt on call
Therefore, `leash(15)` is equivalent to `leash(full)` and
`leash(0)` is equivalent to `leash(off)`.
Another way of using `leash` is to give it a list with the names of
the ports where the debugger should stop. For example,
`leash([call,exit,redo,fail])` is the same as `leash(full)` or
`leash(15)` and `leash([fail])` might be used instead of
`leash(1)`.
@}
*/
leash(X) :- var(X),
'$do_error'(instantiation_error,leash(X)).
leash(X) :-
'$init_debugger',
'$leashcode'(X,Code),
set_value('$leash',Code),
'$show_leash'(informational,Code), !.
leash(X) :-
'$do_error'(type_error(leash_mode,X),leash(X)).
'$show_leash'(Msg,0) :-
print_message(Msg,leash([])).
'$show_leash'(Msg,Code) :-
'$check_leash_bit'(Code,0x8,L3,call,LF),
'$check_leash_bit'(Code,0x4,L2,exit,L3),
'$check_leash_bit'(Code,0x2,L1,redo,L2),
'$check_leash_bit'(Code,0x1,[],fail,L1),
print_message(Msg,leash(LF)).
'$check_leash_bit'(Code,Bit,L0,_,L0) :- Bit /\ Code =:= 0, !.
'$check_leash_bit'(_,_,L0,Name,[Name|L0]).
'$leashcode'(full,0xf) :- !.
'$leashcode'(on,0xf) :- !.
'$leashcode'(half,0xb) :- !.
'$leashcode'(loose,0x8) :- !.
'$leashcode'(off,0x0) :- !.
'$leashcode'(none,0x0) :- !.
%'$leashcode'([L|M],Code) :- !, '$leashcode_list'([L|M],Code).
'$leashcode'([L|M],Code) :- !,
'$list2Code'([L|M],Code).
'$leashcode'(N,N) :- integer(N), N >= 0, N =< 0xf.
'$list2Code'(V,_) :- var(V), !,
'$do_error'(instantiation_error,leash(V)).
'$list2Code'([],0) :- !.
'$list2Code'([V|L],_) :- var(V), !,
'$do_error'(instantiation_error,leash([V|L])).
'$list2Code'([call|L],N) :- '$list2Code'(L,N1), N is 0x8 + N1.
'$list2Code'([exit|L],N) :- '$list2Code'(L,N1), N is 0x4 + N1.
'$list2Code'([redo|L],N) :- '$list2Code'(L,N1), N is 0x2 + N1.
'$list2Code'([fail|L],N) :- '$list2Code'(L,N1), N is 0x1 + N1.
/*-----------------------------------------------------------------------------
debugging
-----------------------------------------------------------------------------*/
debugging :-
'$init_debugger',
prolog:debug_action_hook(nospyall), !.
debugging :-
( '$swi_current_prolog_flag'(debug, true) ->
print_message(help,debug(debug))
;
print_message(help,debug(off))
),
findall(M:(N/A),(recorded('$spy','$spy'(T,M),_),functor(T,N,A)),L),
print_message(help,breakpoints(L)),
get_value('$leash',Leash),
'$show_leash'(help,Leash).
/*
@}
*/
/** @defgroup Deb_Interaction Interacting with the debugger
@ingroup YAPProgramming
Debugging with YAP is similar to debugging with C-Prolog. Both systems
include a procedural debugger, based on Byrd's four port model. In this
model, execution is seen at the procedure level: each activation of a
procedure is seen as a box with control flowing into and out of that
box.
In the four port model control is caught at four key points: before
entering the procedure, after exiting the procedure (meaning successful
evaluation of all queries activated by the procedure), after backtracking but
before trying new alternative to the procedure and after failing the
procedure. Each one of these points is named a port:
~~~~~
*--------------------------------------*
Call | | Exit
---------> + descendant(X,Y) :- offspring(X,Y). + --------->
| |
| descendant(X,Z) :- |
<--------- + offspring(X,Y), descendant(Y,Z). + <---------
Fail | | Redo
*--------------------------------------*
~~~~~
+ `Call`
The call port is activated before initial invocation of
procedure. Afterwards, execution will try to match the goal with the
head of existing clauses for the procedure.
+ `Exit`
This port is activated if the procedure succeeds.
Control will now leave the procedure and return to its ancestor.
+ `Redo`
If the goal, or goals, activated after the call port
fail then backtracking will eventually return control to this procedure
through the redo port.
+ `Fail`
If all clauses for this predicate fail, then the
invocation fails, and control will try to redo the ancestor of this
invocation.
To start debugging, the user will either call `trace` or spy the
relevant procedures, entering debug mode, and start execution of the
program. When finding the first spy-point, YAP's debugger will take
control and show a message of the form:
~~~~~
* (1) call: quicksort([1,2,3],_38) ?
~~~~~
The debugger message will be shown while creeping, or at spy-points,
and it includes four or five fields:
+
The first three characters are used to point out special states of the
debugger. If the port is exit and the first character is '?', the
current call is non-deterministic, that is, it still has alternatives to
be tried. If the second character is a `\*`, execution is at a
spy-point. If the third character is a `>`, execution has returned
either from a skip, a fail or a redo command.
+
The second field is the activation number, and uniquely identifies the
activation. The number will start from 1 and will be incremented for
each activation found by the debugger.
+
In the third field, the debugger shows the active port.
+
The fourth field is the goal. The goal is written by
`write_term/3` on the standard error stream, using the options
given by debugger_print_options.
If the active port is leashed, the debugger will prompt the user with a
`?`, and wait for a command. A debugger command is just a
character, followed by a return. By default, only the call and redo
entries are leashed, but the leash/1 predicate can be used in
order to make the debugger stop where needed.
There are several commands available, but the user only needs to
remember the help command, which is `h`. This command shows all the
available options, which are:
+ `c` - creep
this command makes YAP continue execution and stop at the next
leashed port.
+ `return` - creep
the same as c
+ `l` - leap
YAP will execute until it meets a port for a spied predicate; this mode
keeps all computation history for debugging purposes, so it is more
expensive than standard execution. Use k or z for fast execution.
+ `k` - quasi-leap
similar to leap but faster since the computation history is
not kept; useful when leap becomes too slow.
+ `z` - zip
same as k
+ `s` - skip
YAP will continue execution without showing any messages until
returning to the current activation. Spy-points will be ignored in this
mode. Note that this command keeps all debugging history, use t for fast execution. This command is meaningless, and therefore illegal, in the fail
and exit ports.
+ `t` - fast-skip
similar to skip but faster since computation history is not
kept; useful if skip becomes slow.
+ `f [ _GoalId_]` - fail
If given no argument, forces YAP to fail the goal, skipping the fail
port and backtracking to the parent.
If f receives a goal number as
the argument, the command fails all the way to the goal. If goal _GoalId_ has completed execution, YAP fails until meeting the first active ancestor.
+ `r` [ _GoalId_] - retry
This command forces YAP to jump back call to the port. Note that any
side effects of the goal cannot be undone. This command is not available
at the call port. If f receives a goal number as the argument, the
command retries goal _GoalId_ instead. If goal _GoalId_ has
completed execution, YAP fails until meeting the first active ancestor.
+ `a` - abort
execution will be aborted, and the interpreter will return to the
top-level. YAP disactivates debug mode, but spypoints are not removed.
+ `n` - nodebug
stop debugging and continue execution. The command will not clear active
spy-points.
+ `e` - exit
leave YAP.
+ `h` - help
show the debugger commands.
+ `!` Query
execute a query. YAP will not show the result of the query.
+ `b` - break
break active execution and launch a break level. This is the same as `!break`.
+ `+` - spy this goal
start spying the active goal. The same as `! spy G` where _G_
is the active goal.
+ `-` - nospy this goal
stop spying the active goal. The same as `! nospy G` where _G_ is
the active goal.
+ `p` - print
shows the active goal using print/1
+ `d` - display
shows the active goal using display/1
+ `A;B), M, CP, CalledFromDebugger) :- !,
( '$do_spy'(T, M, CP, debugger) -> '$do_spy'(A, M, CP, CalledFromDebugger)
;
'$do_spy'(B, M, CP, CalledFromDebugger)
).
'$do_spy'((T->A|B), M, CP, CalledFromDebugger) :- !,
( '$do_spy'(T, M, CP, debugger) -> '$do_spy'(A, M, CP, CalledFromDebugger)
;
'$do_spy'(B, M, CP, CalledFromDebugger)
).
'$do_spy'((T->A), M, CP, CalledFromDebugger) :- !,
( '$do_spy'(T, M, CP, debugger) -> '$do_spy'(A, M, CP, CalledFromDebugger) ).
'$do_spy'((A;B), M, CP, CalledFromDebugger) :- !,
(
'$do_spy'(A, M, CP, CalledFromDebugger)
;
'$do_spy'(B, M, CP, CalledFromDebugger)
).
'$do_spy'((A|B), M, CP, CalledFromDebugger) :- !,
(
'$do_spy'(A, M, CP, CalledFromDebugger)
;
'$do_spy'(B, M, CP, CalledFromDebugger)
).
'$do_spy'((\+G), M, CP, CalledFromDebugger) :- !,
\+ '$do_spy'(G, M, CP, CalledFromDebugger).
'$do_spy'((not(G)), M, CP, CalledFromDebugger) :- !,
\+ '$do_spy'(G, M, CP, CalledFromDebugger).
'$do_spy'(G, Module, _, CalledFromDebugger) :-
nb_getval('$spy_gn',L), /* get goal no. */
L1 is L+1, /* bump it */
nb_setval('$spy_gn',L1), /* and save it globaly */
b_getval('$spy_glist',History), /* get goal list */
b_setval('$spy_glist',[info(L,Module,G,_Retry,_Det,_HasFoundAnswers)|History]), /* and update it */
'$loop_spy'(L, G, Module, CalledFromDebugger).
% we are skipping, so we can just call the goal,
% while leaving the minimal structure in place.
'$loop_spy'(GoalNumber, G, Module, CalledFromDebugger) :-
'$current_choice_point'(CP),
'$system_catch'('$loop_spy2'(GoalNumber, G, Module, CalledFromDebugger, CP),
Module, error(Event,Context),
'$loop_spy_event'(error(Event,Context), GoalNumber, G, Module, CalledFromDebugger)).
% handle weird things happening in the debugger.
'$loop_spy_event'('$pass'(Event), _, _, _, _) :- !,
throw(Event).
'$loop_spy_event'(error('$retry_spy'(G0),_), GoalNumber, G, Module, CalledFromDebugger) :-
G0 >= GoalNumber, !,
'$loop_spy'(GoalNumber, G, Module, CalledFromDebugger).
'$loop_spy_event'(error('$retry_spy'(GoalNumber),_), _, _, _, _) :- !,
throw(error('$retry_spy'(GoalNumber),[])).
'$loop_spy_event'(error('$fail_spy'(G0),_), GoalNumber, G, Module, CalledFromDebugger) :-
G0 >= GoalNumber, !,
'$loop_fail'(GoalNumber, G, Module, CalledFromDebugger).
'$loop_spy_event'(error('$fail_spy'(GoalNumber),_), _, _, _, _) :- !,
throw(error('$fail_spy'(GoalNumber),[])).
'$loop_spy_event'(error('$done_spy'(G0),_), GoalNumber, _G, _, CalledFromDebugger) :-
G0 >= GoalNumber, !,
'$continue_debugging'(zip, CalledFromDebugger).
'$loop_spy_event'(error('$done_spy'(GoalNumber),_), _, _, _, _) :- !,
throw(error('$done_spy'(GoalNumber),[])).
'$loop_spy_event'(Event, GoalNumber, G, Module, CalledFromDebugger) :-
'$debug_error'(Event),
'$system_catch'(
('$trace'(exception(Event),G,Module,GoalNumber,_),fail),
Module,
error(NewEvent,NewContext),
'$loop_spy_event'(error(NewEvent,NewContext), GoalNumber, G, Module, CalledFromDebugger)
).
'$debug_error'(Event) :-
'$Error'(Event), fail.
'$debug_error'(_).
% just fail here, don't really need to call debugger, the user knows what he
% wants to do
'$loop_fail'(_GoalNumber, _G, _Module, CalledFromDebugger) :-
'$continue_debugging'(fail, CalledFromDebugger),
fail.
% if we are in
'$loop_spy2'(GoalNumber, G, Module, CalledFromDebugger, CP) :-
/* the following choice point is where the predicate is called */
b_getval('$spy_glist',[Info|_]), /* get goal list */
Info = info(_,_,_,Retry,Det,false),
(
/* call port */
'$enter_goal'(GoalNumber, G, Module),
'$spycall'(G, Module, CalledFromDebugger, Retry),
% make sure we are in system mode when running the debugger.
(
'$debugger_deterministic_goal'(G) ->
Det=true
;
Det=false
),
/* go execute the continuation */
(
/* exit port */
Retry = false,
/* found an answer, so it can redo */
nb_setarg(6, Info, true),
'$show_trace'(exit,G,Module,GoalNumber,Det), /* output message at exit */
/* exit port */
/* get rid of deterministic computations */
(
Det == true
->
'$$cut_by'(CP)
;
true
),
'$continue_debugging'(exit, CalledFromDebugger)
;
% make sure we are in system mode when running the debugger.
/* backtracking from exit */
/* we get here when we want to redo a goal */
/* redo port */
(
arg(6, Info, true)
->
'$show_trace'(redo,G,Module,GoalNumber,_), /* inform user_error */
nb_setarg(6, Info, false)
;
true
),
'$continue_debugging'(fail, CalledFromDebugger),
fail /* to backtrack to spycalls */
)
;
'$show_trace'(fail,G,Module,GoalNumber,_), /* inform at fail port */
'$continue_debugging'(fail, CalledFromDebugger),
/* fail port */
fail
).
'$enter_goal'(GoalNumber, G, Module) :-
'$zip'(GoalNumber, G, Module), !.
'$enter_goal'(GoalNumber, G, Module) :-
'$trace'(call, G, Module, GoalNumber, _).
'$show_trace'(_, G, Module, GoalNumber,_) :-
'$zip'(GoalNumber, G, Module), !.
'$show_trace'(P,G,Module,GoalNumber,Deterministic) :-
'$trace'(P,G,Module,GoalNumber,Deterministic).
%
% skip a goal or a port
%
'$zip'(GoalNumber, G, Module) :-
nb_getval('$debug_run',StopPoint),
% zip mode off, we cannot zip
StopPoint \= off,
(
% skip spy points (eg, s).
StopPoint == spy
->
\+ '$pred_being_spied'(G, Module)
;
% skip goals (eg, l).
number(StopPoint)
->
StopPoint < GoalNumber
).
%
'$spycall'(G, M, _, _) :-
nb_getval('$debug_jump',true),
!,
'$execute_nonstop'(G,M).
'$spycall'(G, M, _, _) :-
(
'$system_predicate'(G,M)
;
'$system_module'(M)
),
!,
( '$is_metapredicate'(G, M)
->
'$meta_expansion'(G,M,M,M,G1,[]),
'$creep'(G1, M)
;
'$execute'(M:G)
).
'$spycall'(G, M, _, _) :-
'$tabled_predicate'(G,M),
!,
'$continue_debugging_goal'(no, '$execute_nonstop'(G,M)).
'$spycall'(G, M, CalledFromDebugger, InRedo) :-
'$is_metapredicate'(G, M), !,
'$meta_expansion'(G,M,M,M,G1,[]),
'$spycall_expanded'(G1, M, CalledFromDebugger, InRedo).
'$spycall'(G, M, CalledFromDebugger, InRedo) :-
'$spycall_expanded'(G, M, CalledFromDebugger, InRedo).
'$spycall_expanded'(G, M, _CalledFromDebugger, InRedo) :-
'$flags'(G,M,F,F),
F /\ 0x08402000 =\= 0, !, % dynamic procedure, logical semantics, or source
% use the interpreter
CP is '$last_choice_pt',
'$clause'(G, M, Cl, _),
% I may backtrack to here from far away
( '$do_spy'(Cl, M, CP, debugger) ; InRedo = true ).
'$spycall_expanded'(G, M, CalledFromDebugger, InRedo) :-
'$undefined'(G, M), !,
'$get_undefined_pred'(G, M, Goal, NM), NM \= M,
'$spycall'(Goal, NM, CalledFromDebugger, InRedo).
'$spycall_expanded'(G, M, _, InRedo) :-
% I lost control here.
CP is '$last_choice_pt',
'$static_clause'(G,M,_,R),
% I may backtrack to here from far away
(
'$continue_debugging_goal'(no, '$execute_clause'(G, M, R, CP))
;
InRedo = true
).
%
% execute a built-in in creep mode
%
'$creep'(G,M) :-
(
'$$save_by'(CP1),
'$creep',
'$execute_nonstop'(G,M),
'$$save_by'(CP2),
(CP1 == CP2 -> ! ; ( true ; '$creep', fail ) ),
'$stop_creeping'
;
fail
).
'$tabled_predicate'(G,M) :-
'$flags'(G,M,F,F),
F /\ 0x00000040 =\= 0.
%'$trace'(P,G,Module,L,Deterministic) :-
% '$nb_getval'('$system_mode',On,fail), writeln(On), fail.
'$trace'(P,G,Module,L,Deterministic) :-
% at this point we are done with leap or skip
nb_setval('$debug_run',off),
% make sure we run this code outside debugging mode.
'$swi_set_prolog_flag'(debug, false),
repeat,
'$trace_msg'(P,G,Module,L,Deterministic),
(
'$unleashed'(P) ->
'$action'(10,P,L,G,Module,Debug),
put_code(user_error, 10)
;
write(user_error,' ? '), get_code(debugger_input,C),
'$action'(C,P,L,G,Module,Debug)
),
(Debug = on
->
'$swi_set_prolog_flag'(debug, true)
;
Debug = zip
->
'$swi_set_prolog_flag'(debug, true)
;
'$swi_set_prolog_flag'(debug, false)
),
!.
'$trace_msg'(P,G,Module,L,Deterministic) :-
flush_output(user_output),
flush_output(user_error),
functor(P,P0,_),
(P = exit, Deterministic \= true -> Det = '?' ; Det = ' '),
('$pred_being_spied'(G,Module) -> CSPY = '*' ; CSPY = ' '),
% vsc: fix this
% ( SL = L -> SLL = '>' ; SLL = ' '),
SLL = ' ',
( Module\=prolog,
Module\=user
->
GW = Module:G
;
GW = G
),
format(user_error,'~a~a~a (~d) ~q:',[Det,CSPY,SLL,L,P0]),
'$debugger_write'(user_error,GW).
'$unleashed'(call) :- get_value('$leash',L), L /\ 2'1000 =:= 0. %'
'$unleashed'(exit) :- get_value('$leash',L), L /\ 2'0100 =:= 0. %'
'$unleashed'(redo) :- get_value('$leash',L), L /\ 2'0010 =:= 0. %'
'$unleashed'(fail) :- get_value('$leash',L), L /\ 2'0001 =:= 0. %'
% the same as fail.
'$unleashed'(exception(_)) :- get_value('$leash',L), L /\ 2'0001 =:= 0. %'
'$debugger_write'(Stream, G) :-
recorded('$print_options','$debugger'(OUT),_), !,
write_term(Stream, G, OUT).
'$debugger_write'(Stream, G) :-
writeq(Stream, G).
'$action'(13,P,CallNumber,G,Module,Zip) :- !, % newline creep
get_code( debugger_input,C),
'$action'(C,P,CallNumber,G,Module,Zip).
'$action'(10,_,_,_,_,on) :- !, % newline creep
nb_setval('$debug_jump',false).
'$action'(0'!,_,_,_,_,_) :- !, % ! 'g execute
read(debugger_input, G),
% don't allow yourself to be caught by creep.
'$swi_current_prolog_flag'(debug, OldDeb),
'$swi_set_prolog_flag'(debug, false),
( '$execute'(G) -> true ; true),
'$swi_set_prolog_flag'(debug, OldDeb),
% '$skipeol'(0'!), % '
fail.
'$action'(0'<,_,_,_,_,_) :- !, % <'Depth
'$new_deb_depth',
'$skipeol'(0'<),
fail.
'$action'(0'^,_,_,G,_,_) :- !, % '
'$print_deb_sterm'(G),
'$skipeol'(0'^),
fail.
'$action'(0'a,_,_,_,_,off) :- !, % 'a abort
'$skipeol'(0'a),
abort.
'$action'(0'b,_,_,_,_,_) :- !, % 'b break
'$skipeol'(0'b),
break,
fail.
'$action'(0'A,_,_,_,_,_) :- !, % 'b break
'$skipeol'(0'A),
'$hacks':'$stack_dump',
fail.
'$action'(0'c,_,_,_,_,on) :- !, % 'c creep
'$skipeol'(0'c),
nb_setval('$debug_jump',false).
'$action'(0'e,_,_,_,_,_) :- !, % 'e exit
'$skipeol'(0'e),
halt.
'$action'(0'f,_,CallId,_,_,_) :- !, % 'f fail
'$scan_number'(0'f, CallId, GoalId), %'f
throw(error('$fail_spy'(GoalId),[])).
'$action'(0'h,_,_,_,_,_) :- !, % 'h help
'$action_help',
'$skipeol'(104),
fail.
'$action'(0'?,_,_,_,_,_) :- !, % '? help
'$action_help',
'$skipeol'(104),
fail.
'$action'(0'p,_,_,G,Module,_) :- !, % 'p print
((Module = prolog ; Module = user) ->
print(user_error,G), nl(user_error)
;
print(user_error,Module:G), nl(user_error)
),
'$skipeol'(0'p),
fail.
'$action'(0'd,_,_,G,Module,_) :- !, % 'd display
((Module = prolog ; Module = user) ->
display(user_error,G), nl(user_error)
;
display(user_error,Module:G), nl(user_error)
),
'$skipeol'(0'd),
fail.
'$action'(0'l,_,_,_,_,on) :- !, % 'l leap
'$skipeol'(0'l),
nb_setval('$debug_run',spy),
nb_setval('$debug_jump',false).
'$action'(0'z,_,_,_,_,zip) :- !, % 'z zip, fast leap
'$skipeol'(0'z), % 'z
nb_setval('$debug_run',spy),
nb_setval('$debug_jump',true).
% skip first call (for current goal),
% stop next time.
'$action'(0'k,_,_,_,_,zip) :- !, % 'k zip, fast leap
'$skipeol'(0'k), % '
nb_setval('$debug_run',spy),
nb_setval('$debug_jump',true).
% skip first call (for current goal),
% stop next time.
'$action'(0'n,_,_,_,_,off) :- !, % 'n nodebug
'$skipeol'(0'n), % '
% tell debugger never to stop.
nb_setval('$debug_run', -1),
nb_setval('$debug_jump',true),
nodebug.
'$action'(0'r,_,CallId,_,_,_) :- !, % 'r retry
'$scan_number'(0'r,CallId,ScanNumber), % '
'$swi_set_prolog_flag'(debug, true),
throw(error('$retry_spy'(ScanNumber),[])).
'$action'(0's,P,CallNumber,_,_,on) :- !, % 's skip
'$skipeol'(0's), % '
( (P=call; P=redo) ->
nb_setval('$debug_run',CallNumber),
nb_setval('$debug_jump',false)
;
'$ilgl'(0's) % '
).
'$action'(0't,P,CallNumber,_,_,zip) :- !, % 't fast skip
'$skipeol'(0't), % '
( (P=call; P=redo) ->
nb_setval('$debug_run',CallNumber),
nb_setval('$debug_jump',true)
;
'$ilgl'(0't) % '
).
'$action'(0'+,_,_,G,M,_) :- !, % '+ spy this
functor(G,F,N), spy(M:(F/N)),
'$skipeol'(0'+), % '
fail.
'$action'(0'-,_,_,G,M,_) :- !, % '- nospy this
functor(G,F,N), nospy(M:(F/N)),
'$skipeol'(0'-), % '
fail.
'$action'(0'g,_,_,_,_,_) :- !, % 'g ancestors
'$scan_number'(0'g,-1,HowMany), % '
'$show_ancestors'(HowMany),
fail.
'$action'(C,_,_,_,_,_) :-
'$skipeol'(C),
'$ilgl'(C),
fail.
% first argument is exit, zip or fail
% second is creep, meta_creep, spy, or debugger
%'$continue_debugging'(Exit, Debugger) :-
% writeln('$continue_debugging'(Exit, Debugger)), fail.
% that's what follows
'$continue_debugging'(_, debugger) :- !.
% do not need to debug!
% go back to original sequence.
'$continue_debugging'(zip, _) :- !.
'$continue_debugging'(_, creep) :- !,
'$creep'.
'$continue_debugging'(fail, _) :- !.
'$continue_debugging'(_, _).
% if we are in the interpreter, don't need to care about forcing a trace, do we?
'$continue_debugging_goal'(yes,G) :- !,
'$execute_dgoal'(G).
% do not need to debug!
'$continue_debugging_goal'(_,G) :-
'nb_getval'('$debug_run',Zip),
(Zip == nodebug ; number(Zip) ; Zip == spy ), !,
'$execute_dgoal'(G).
'$continue_debugging_goal'(_,G) :-
'$execute_creep_dgoal'(G).
'$execute_dgoal'('$execute_nonstop'(G,M)) :-
'$execute_nonstop'(G,M).
'$execute_dgoal'('$execute_clause'(G, M, R, CP)) :-
'$execute_clause'(G, M, R, CP).
'$execute_creep_dgoal'('$execute_nonstop'(G,M)) :-
'$creep',
'$execute_nonstop'(G,M).
'$execute_creep_dgoal'('$execute_clause'(G, M, R, CP)) :-
'$creep',
'$execute_clause'(G, M, R, CP).
'$show_ancestors'(HowMany) :-
b_getval('$spy_glist',[_|History]),
(
History == []
->
print_message(help, ancestors([]))
;
'$show_ancestors'(History,HowMany),
nl(user_error)
).
'$show_ancestors'([],_).
'$show_ancestors'([_|_],0) :- !.
'$show_ancestors'([info(L,M,G,Retry,Det,_Exited)|History],HowMany) :-
'$show_ancestor'(L,M,G,Retry,Det,HowMany,HowMany1),
'$show_ancestors'(History,HowMany1).
% skip exit port, we're looking at true ancestors
'$show_ancestor'(_,_,_,_,Det,HowMany,HowMany) :-
nonvar(Det), !.
% look at retry
'$show_ancestor'(GoalNumber, M, G, Retry, _, HowMany, HowMany1) :-
nonvar(Retry), !,
HowMany1 is HowMany-1,
'$trace_msg'(redo, G, M, GoalNumber, _), nl(user_error).
'$show_ancestor'(GoalNumber, M, G, _, _, HowMany, HowMany1) :-
HowMany1 is HowMany-1,
'$trace_msg'(call, G, M, GoalNumber, _), nl(user_error).
'$action_help' :-
format(user_error,'newline creep a abort~n', []),
format(user_error,'c creep e exit~n', []),
format(user_error,'f Goal fail h help~n', []),
format(user_error,'l leap r Goal retry~n', []),
format(user_error,'s skip t fastskip~n', []),
format(user_error,'q quasiskip k quasileap~n', []),
format(user_error,'b break n no debug~n', []),
format(user_error,'p print d display~n', []),
format(user_error,' 0.
'$scan_number3'( C, Nb0, Nb) :-
C >= "0", C =< "9",
NbI is Nb0*10+(C-"0"),
get_code( debugger_input, NC),
'$scan_number3'( NC, NbI, Nb).
'$print_deb_sterm'(G) :-
'$get_sterm_list'(L), !,
'$deb_get_sterm_in_g'(L,G,A),
recorda('$debug_sub_skel',L,_),
format(user_error,'~n~w~n~n',[A]).
'$print_deb_sterm'(_) :- '$skipeol'(94).
'$get_sterm_list'(L) :-
get_code( debugger_input_input,C),
'$deb_inc_in_sterm_oldie'(C,L0,CN),
'$get_sterm_list'(L0,CN,0,L).
'$deb_inc_in_sterm_oldie'(94,L0,CN) :- !,
get_code( debugger_input,CN),
( recorded('$debug_sub_skel',L0,_) -> true ;
CN = [] ).
'$deb_inc_in_sterm_oldie'(C,[],C).
'$get_sterm_list'(L0,C,N,L) :-
( C =:= "^", N =\= 0 -> get_code(debugger_input, CN),
'$get_sterm_list'([N|L0],CN,0,L) ;
C >= "0", C =< "9" -> NN is 10*N+C-"0", get_code(debugger_input, CN),
'$get_sterm_list'(L0,CN,NN,L);
C =:= 10 -> (N =:= 0 -> L = L0 ; L=[N|L0]) ).
'$deb_get_sterm_in_g'([],G,G).
'$deb_get_sterm_in_g'([H|T],G,A) :-
'$deb_get_sterm_in_g'(T,G,A1),
arg(H,A1,A).
'$new_deb_depth' :-
get_code( debugger_input,C),
'$get_deb_depth'(C,D),
'$set_deb_depth'(D).
'$get_deb_depth'(10,10) :- !. % default depth is 0
'$get_deb_depth'(C,XF) :-
'$get_deb_depth_char_by_char'(C,0,XF).
'$get_deb_depth_char_by_char'(10,X,X) :- !.
'$get_deb_depth_char_by_char'(C,X0,XF) :-
C >= "0", C =< "9", !,
XI is X0*10+C-"0",
get_code( debugger_input,NC),
'$get_deb_depth_char_by_char'(NC,XI,XF).
% reset when given garbage.
'$get_deb_depth_char_by_char'(C,_,10) :- '$skipeol'(C).
'$set_deb_depth'(D) :-
recorded('$print_options','$debugger'(L),R), !,
'$delete_if_there'(L, max_depth(_), LN),
erase(R),
recorda('$print_options','$debugger'([max_depth(D)|LN]),_).
'$set_deb_depth'(D) :-
recorda('$print_options','$debugger'([quoted(true),numbervars(true),portrayed(true),max_depth(D)]),_).
'$delete_if_there'([], _, []).
'$delete_if_there'([T|L], T, LN) :- !,
'$delete_if_there'(L, T, LN).
'$delete_if_there'([Q|L], T, [Q|LN]) :-
'$delete_if_there'(L, T, LN).
'$debugger_deterministic_goal'(G) :-
yap_hacks:current_choicepoints(CPs0),
% $cps(CPs0),
'$debugger_skip_traces'(CPs0,CPs1),
'$debugger_skip_loop_spy2'(CPs1,CPs2),
'$debugger_skip_spycall'(CPs2,CPs3),
'$debugger_skip_loop_spy2'(CPs3,[Catch|_]),
yap_hacks:choicepoint(Catch,_,prolog,'$catch',3,'$catch'(_,'$loop_spy_event'(_,_,G,_,_),_),_).
'$cps'([CP|CPs]) :-
yap_hacks:choicepoint(CP,A,B,C,D,E,F),
write(A:B:C:D:E:F),nl,
'$cps'(CPs).
'$cps'([]).
'$debugger_skip_spycall'([CP|CPs],CPs1) :-
yap_hacks:choicepoint(CP,_,prolog,'$spycall',4,(_;_),_), !,
'$debugger_skip_spycall'(CPs,CPs1).
'$debugger_skip_spycall'(CPs,CPs).
'$debugger_skip_traces'([CP|CPs],CPs1) :-
yap_hacks:choicepoint(CP,_,prolog,'$trace',4,(_;_),_), !,
'$debugger_skip_traces'(CPs,CPs1).
'$debugger_skip_traces'(CPs,CPs).
'$debugger_skip_loop_spy2'([CP|CPs],CPs1) :-
yap_hacks:choicepoint(CP,_,prolog,'$loop_spy2',5,(_;_),_), !,
'$debugger_skip_loop_spy2'(CPs,CPs1).
'$debugger_skip_loop_spy2'(CPs,CPs).