a\input texinfo @c -*- mode: texinfo; coding: latin-1; -*- @c %**start of header @setfilename yap.info @setcontentsaftertitlepage @settitle YAP Prolog User's Manual @c For double-sided printing, uncomment: @c @setchapternewpage odd @c %**end of header @set VERSION 5.1.4 @set EDITION 4.2.5 @set UPDATED June 2008 @c Index for C-Prolog compatible predicate @defindex cy @c Index for predicates not in C-Prolog @defindex cn @c Index for predicates sort of (almost) in C-Prolog @defindex ca @c Index for SICStus Prolog compatible predicate @defindex sy @c Index for predicates not in SICStus Prolog @defindex sn @c Index for predicates sort of (almost) in SICStus Prolog @defindex sa @setchapternewpage odd @c @smallbook @comment %** end of header @ifnottex @format @dircategory The YAP Prolog System @direntry * YAP: (yap). YAP Prolog User's Manual. @end direntry @end format @end ifnottex @titlepage @title YAP User's Manual @subtitle Version @value{VERSION} @author V@'{@dotless{i}}tor Santos Costa, @author Lu@'{@dotless{i}}s Damas, @author Rog@'erio Reis, and @author R@'uben Azevedo @page @vskip 2pc Copyright @copyright{} 1989-2000 L. Damas, V. Santos Costa and Universidade do Porto. Permission is granted to make and distribute verbatim copies of this manual provided the copyright notice and this permission notice are preserved on all copies. Permission is granted to copy and distribute modified versions of this manual under the conditions for verbatim copying, provided that the entire resulting derived work is distributed under the terms of a permission notice identical to this one. Permission is granted to copy and distribute translations of this manual into another language, under the above conditions for modified versions. @end titlepage @ifnottex @node Top, , , (dir) @top YAP Prolog This file documents the YAP Prolog System version @value{VERSION}, a high-performance Prolog compiler developed at LIACC, Universidade do Porto. YAP is based on David H. D. Warren's WAM (Warren Abstract Machine), with several optimizations for better performance. YAP follows the Edinburgh tradition, and is largely compatible with DEC-10 Prolog, Quintus Prolog, and especially with C-Prolog. This file contains extracts of the SWI-Prolog manual, as written by Jan Wielemaker. Our thanks to the author for his kind permission in allowing us to include his text in this document. @menu * Intro:: Introduction * Install:: Installation * Run:: Running YAP * Syntax:: The syntax of YAP * Loading Programs:: Loading Prolog programs * Modules:: Using Modules in YAP * Built-ins:: Built In Predicates * Library:: Library Predicates * SWI-Prolog:: SWI-Prolog emulation * Extensions:: Extensions to Standard YAP * Rational Trees:: Working with Rational Trees * Co-routining:: Changing the Execution of Goals * Attributed Variables:: Using attributed Variables * CLPR:: The CLP(R) System * CHR:: The CHR System * Logtalk:: The Logtalk Object-Oriented System * Threads:: Thread Library * Parallelism:: Running in Or-Parallel * Tabling:: Storing Intermediate Solutions of programs * Low Level Profiling:: Profiling Abstract Machine Instructions * Low Level Tracing:: Tracing at Abstract Machine Level * Debugging:: Using the Debugger * Efficiency:: Efficiency Considerations * C-Interface:: Interfacing predicates written in C * YAPLibrary:: Using YAP as a library in other programs * Compatibility:: Compatibility with other Prolog systems * Predicate Index:: An item for each predicate * Concept Index:: An item for each concept Built In Predicates * Control:: Controlling the execution of Prolog programs * Undefined Procedures:: Handling calls to Undefined Procedures * Messages:: Message Handling in YAP * Testing Terms:: Predicates on Terms * Predicates on Atoms:: Manipulating Atoms * Predicates on Characters:: Manipulating Characters * Comparing Terms:: Comparison of Terms * Arithmetic:: Arithmetic in YAP * I/O:: Input/Output with YAP * Database:: Modifying Prolog's Database * Sets:: Finding All Possible Solutions * Grammars:: Grammar Rules * Preds:: Predicate Information * OS:: Access to Operating System Functionality * Term Modification:: Updating Prolog Terms * Global Variables:: Manipulating Global Variables * Profiling:: Profiling Prolog Execution * Call Counting:: Limiting the Maximum Number of Reductions * Arrays:: Supporting Global and Local Arrays * Preds:: Information on Predicates * Misc:: Miscellaneous Predicates Subnodes of Running * Running YAP Interactively:: Interacting with YAP * Running Prolog Files:: Running Prolog files as scripts Subnodes of Syntax * Formal Syntax:: Syntax of Terms * Tokens:: Syntax of Prolog tokens * Encoding:: How characters are encoded and Wide Character Support Subnodes of Tokens * Numbers:: Integer and Floating-Point Numbers * Strings:: Sequences of Characters * Atoms:: Atomic Constants * Variables:: Logical Variables * Punctuation Tokens:: Tokens that separate other tokens * Layout:: Comments and Other Layout Rules Subnodes of Numbers * Integers:: How Integers are read and represented * Floats:: Floating Point Numbers Subnodes of Encoding * Stream Encoding:: How Prolog Streams can be coded * BOM:: The Byte Order Mark Subnodes of Loading Programs * Compiling:: Program Loading and Updating * Setting the Compiler:: Changing the compiler's parameters * Conditional Compilation:: Compiling program fragments * Saving:: Saving and Restoring Programs Subnodes of Modules * Module Concepts:: The Key Ideas in Modules * Defining Modules:: How To Define a New Module * Using Modules:: How to Use a Module * Meta-Predicates in Modules:: How to Handle New Meta-Predicates * Re-Exporting Modules:: How to Re-export Predicates From Other Modules Subnodes of Input/Output * Streams and Files:: Handling Streams and Files * C-Prolog File Handling:: C-Prolog Compatible File Handling * I/O of Terms:: Input/Output of terms * I/O of Characters:: Input/Output of Characters * I/O for Streams:: Input/Output using Streams * C-Prolog to Terminal:: C-Prolog compatible Character I/O to terminal * I/O Control:: Controlling your Input/Output * Sockets:: Using Sockets from YAP Subnodes of Database * Modifying the Database:: Asserting and Retracting * Looking at the Database:: Finding out what is in the Data Base * Database References:: Using Data Base References * Internal Database:: YAP's Internal Database * BlackBoard:: Storing and Fetching Terms in the BlackBoard Subnodes of Library * Apply:: SWI-Compatible Apply library. * Apply Macros:: Apply a Predicate to a list or to sub-terms. * Association Lists:: Binary Tree Implementation of Association Lists. * AVL Trees:: Predicates to add and lookup balanced binary trees. * Heaps:: Labelled binary tree where the key of each node is less than or equal to the keys of its children. * Lists:: List Manipulation * matrix:: Matrix Objects * MATLAB:: Matlab Interface * Non-Backtrackable Data Structures:: Queues, Heaps, and Beams. * Ordered Sets:: Ordered Set Manipulation * Pseudo Random:: Pseudo Random Numbers * Queues:: Queue Manipulation * Random:: Random Numbers * Read Utilities:: SWI inspired utilities for fast stream scanning. * Red-Black Trees:: Predicates to add, lookup and delete in red-black binary trees. * RegExp:: Regular Expression Manipulation * Splay Trees:: Splay Trees * String I/O:: Writing To and Reading From Strings * System:: System Utilities * Terms:: Utilities on Terms * Cleanup:: Call With registered Cleanup Calls * Timeout:: Call With Timeout * Trees:: Updatable Binary Trees * Tries:: Trie Data Structure * UGraphs:: Unweighted Graphs * DGraphs:: Directed Graphs Implemented With Red-Black Trees * UnDGraphs:: Undirected Graphs Using DGraphs * LAM:: LAM MPI Subnodes of Debugging * Deb Preds:: Debugging Predicates * Deb Interaction:: Interacting with the debugger Subnodes of Compatibility * C-Prolog:: Compatibility with the C-Prolog interpreter * SICStus Prolog:: Compatibility with the Quintus and SICStus Prolog systems * ISO Prolog:: Compatibility with the ISO Prolog standard Subnodes of Attributes * Attribute Declarations:: Declaring New Attributes * Attribute Manipulation:: Setting and Reading Attributes * Attributed Unification:: Tuning the Unification Algorithm * Displaying Attributes:: Displaying Attributes in User-Readable Form * Projecting Attributes:: Obtaining the Attributes of Interest * Attribute Examples:: Two Simple Examples of how to use Attributes. Subnodes of SWI-Prolog * Invoking Predicates on all Members of a List :: maplist and friends * hProlog and SWI-Prolog Attributed Variables :: Emulating SWI-like attributed variables * SWI-Prolog Global Variables :: Emulating SWI-like attributed variables @c Subnodes of CLP(Q,R) @c * Introduction to CLPQ:: The CLP(Q,R) System @c * Referencing CLPQR:: How to Reference CLP(Q,R) @c * CLPQR Acknowledgments:: Acknowledgments for CLP(Q,R) @c * Solver Interface:: Using the CLP(Q,R) System @c * Notational Conventions:: The CLP(Q,R) Notation @c * Solver Predicates:: The CLP(Q,R) Interface Predicates @c * Unification:: Unification and CLP(Q,R) @c * Feedback and Bindings:: Information flow in CLP(Q,R) @c * Linearity and Nonlinear Residues:: Linear and Nonlinear Constraints @c * How Nonlinear Residues are made to disappear:: Handling Nonlinear Residues @c * Isolation Axioms:: Isolating the Variable to be Solved @c * Numerical Precision and Rationals:: Reals and Rationals @c * Projection and Redundancy Elimination:: Presenting Bindings for Query Variables @c * Variable Ordering:: Linear Relationships between Variables @c * Turning Answers into Terms:: using @code{call_residue/2} @c * Projecting Inequalities:: How to project linear inequations @c * Why Disequations:: Using Disequations in CLP(Q,R) @c * Syntactic Sugar:: An easier syntax @c * Monash Examples:: The Monash Library @c * Compatibility Notes:: CLP(Q,R) and the clp(R) interpreter @c * A Mixed Integer Linear Optimization Example:: MIP models @c * Implementation Architecture:: CLP(Q,R) Components @c * Fragments and Bits:: Final Last Words on CLP(Q,R) @c * CLPQR Bugs:: Bugs in CLP(Q,R) @c * CLPQR References:: References for CLP(Q,R) Subnodes of CLPR * CLPR Solver Predicates:: * CLPR Syntax:: * CLPR Unification:: * CLPR Non-linear Constraints:: Subnodes of CHR * CHR Introduction:: * CHR Syntax and Semantics:: * CHR in YAP Programs:: * CHR Debugging:: * CHR Examples:: * CHR Compatibility:: * CHR Guidelines:: Subnodes of C-Interface * Manipulating Terms:: Primitives available to the C programmer * Manipulating Terms:: Primitives available to the C programmer * Unifying Terms:: How to Unify Two Prolog Terms * Manipulating Strings:: From character arrays to Lists of codes and back * Memory Allocation:: Stealing Memory From YAP * Controlling Streams:: Control How YAP sees Streams * Calling YAP From C:: From C to YAP to C to YAP * Module Manipulation in C:: Create and Test Modules from within C * Writing C:: Writing Predicates in C * Loading Objects:: Loading Object Files * Save&Rest:: Saving and Restoring * YAP4 Notes:: Changes in Foreign Predicates Interface Subnodes of C-Prolog * Major Differences with C-Prolog:: Major Differences between YAP and C-Prolog * Fully C-Prolog Compatible:: YAP predicates fully compatible with C-Prolog * Not Strictly C-Prolog Compatible:: YAP predicates not strictly as C-Prolog * Not in C-Prolog:: YAP predicates not available in C-Prolog * Not in YAP:: C-Prolog predicates not available in YAP Subnodes of SICStus Prolog * Major Differences with SICStus:: Major Differences between YAP and SICStus Prolog * Fully SICStus Compatible:: YAP predicates fully compatible with SICStus Prolog * Not Strictly SICStus Compatible:: YAP predicates not strictly as SICStus Prolog * Not in SICStus Prolog:: YAP predicates not available in SICStus Prolog Tables * Operators:: Predefined operators @end menu @end ifnottex @node Intro, Install, , Top @unnumbered Introduction This document provides User information on version @value{VERSION} of YAP (@emph{Yet Another Prolog}). The YAP Prolog System is a high-performance Prolog compiler developed at LIACC, Universidade do Porto. YAP provides several important features: @itemize @bullet @item Speed: YAP is widely considered one of the fastest available Prolog systems. @item Functionality: it supports stream I/O, sockets, modules, exceptions, Prolog debugger, C-interface, dynamic code, internal database, DCGs, saved states, co-routining, arrays, threads. @item We explicitly allow both commercial and non-commercial use of YAP. @end itemize YAP is based on the David H. D. Warren's WAM (Warren Abstract Machine), with several optimizations for better performance. YAP follows the Edinburgh tradition, and was originally designed to be largely compatible with DEC-10 Prolog, Quintus Prolog, and especially with C-Prolog. YAP implements most of the ISO-Prolog standard. We are striving at full compatibility, and the manual describes what is still missing. The manual also includes a (largely incomplete) comparison with SICStus Prolog. The document is intended neither as an introduction to Prolog nor to the implementation aspects of the compiler. A good introduction to programming in Prolog is the book @cite{The Art of Prolog}, by L. Sterling and E. Shapiro, published by "The MIT Press, Cambridge MA". Other references should include the classical @cite{Programming in Prolog}, by W.F. Clocksin and C.S. Mellish, published by Springer-Verlag. YAP 4.3 is known to build with many versions of gcc (<= gcc-2.7.2, >= gcc-2.8.1, >= egcs-1.0.1, gcc-2.95.*) and on a variety of Unixen: SunOS 4.1, Solaris 2.*, Irix 5.2, HP-UX 10, Dec Alpha Unix, Linux 1.2 and Linux 2.* (RedHat 4.0 thru 5.2, Debian 2.*) in both the x86 and alpha platforms. It has been built on Windows NT 4.0 using Cygwin from Cygnus Solutions (see README.nt) and using Visual C++ 6.0. The overall copyright and permission notice for YAP4.3 can be found in the Artistic file in this directory. YAP follows the Perl Artistic license, and it is thus non-copylefted freeware. If you have a question about this software, desire to add code, found a bug, want to request a feature, or wonder how to get further assistance, please send e-mail to @email{yap-users AT lists.sourceforge.net}. To subscribe to the mailing list, visit the page @url{https://lists.sourceforge.net/lists/listinfo/yap-users}. On-line documentation is available for YAP at: @url{http://www.ncc.up.pt/~vsc/YAP/} Recent versions of YAP, including both source and selected binaries, can be found from this same URL. This manual was written by V@'{@dotless{i}}tor Santos Costa, Lu@'{@dotless{i}}s Damas, Rog@'erio Reis, and R@'uben Azevedo. The manual is largely based on the DECsystem-10 Prolog User's Manual by D.L. Bowen, L. Byrd, F. C. N. Pereira, L. M. Pereira, and D. H. D. Warren. We have also used comments from the Edinburgh Prolog library written by R. O'Keefe. We would also like to gratefully acknowledge the contributions from Ashwin Srinivasian. We are happy to include in YAP several excellent packages developed under separate licenses. Our thanks to the authors for their kind authorization to include these packages. The packages are, in alphabetical order: @itemize @bullet @item The CHR package developed by Tom Schrijvers, Christian Holzbaur, and Jan Wielemaker. @item The CLP(R) package developed by Leslie De Koninck, Bart Demoen, Tom Schrijvers, and Jan Wielemaker, based on the CLP(Q,R) implementation by Christian Holzbauer. @item The Logtalk Object-Oriented system is developed at the University of Beira Interior, Portugal, by Paulo Moura: @url{http://logtalk.org/} Logtalk is no longer distributed with YAP. Please use the Logtalk standalone installer for a smooth integration with YAP. @item The Pillow WEB library developed at Universidad Politecnica de Madrid by the CLIP group. This package is distributed under the FSF's LGPL. Documentation on this package is distributed separately from yap.tex. @item The @code{yap2swi} library implements some of the functionality of SWI's PL interface. Please do refer to the SWI-Prolog home page: @url{http://www.swi-prolog.org} for more information on SWI-Prolog and for a detailed description of its foreign language interface. @end itemize @node Install, Run, Intro, Top @chapter Installing YAP @cindex installation @menu * Configuration Options:: Tuning the Functionality of YAP Machine * Machine Options:: Tuning YAP for a Particular Machine and Compiler @end menu To compile YAP it should be sufficient to: @enumerate @item @code{mkdir ARCH}. @item @code{cd ARCH}. @item @code{../configure ...options...}. Notice that by default @code{configure} gives you a vanilla configuration. For instance, in order to use co-routining and/or CLP you need to do @example ../configure --enable-coroutining ...options... @end example Please @pxref{Configuration Options} for extra options. @item check the Makefile for any extensions or changes you want to make. YAP uses @code{autoconf}. Recent versions of YAP try to follow GNU conventions on where to place software. @itemize @bullet @item The main executable is placed at @code{BINDIR}. This executable is actually a script that calls the Prolog engine, stored at @code{LIBDIR}. @item @code{LIBDIR} is the directory where libraries are stored. YAPLIBDIR is a subdirectory that contains the Prolog engine and a Prolog library. @item @code{INCLUDEDIR} is used if you want to use YAP as a library. @item @code{INFODIR} is where to store @code{info} files. Usually @code{/usr/local/info}, @code{/usr/info}, or @code{/usr/share/info}. @end itemize @item @code{make}. @item If the compilation succeeds, try @code{./yap}. @item If you feel satisfied with the result, do @code{make install}. @item @code{make install-info} will create the info files in the standard info directory. @item @code{make html} will create documentation in html format in the predefined directory. In most systems you will need to be superuser in order to do @code{make install} and @code{make info} on the standard directories. @end enumerate @node Configuration Options, Machine Options, ,Install @section Tuning the Functionality of YAP @cindex syntax Compiling YAP with the standard options give you a plain vanilla Prolog. You can tune YAP to include extra functionality by calling @code{configure} with the appropriate options: @itemize @bullet @item @code{--enable-rational-trees=yes} gives you support for infinite rational trees. @item @code{--enable-coroutining=yes} gives you support for coroutining, including freezing of goals, attributed variables, and constraints. This will also enable support for infinite rational trees. @item @code{--enable-depth-limit=yes} allows depth limited evaluation, say for implementing iterative deepening. @item @code{--enable-low-level-tracer=yes} allows support for tracing all calls, retries, and backtracks in the system. This can help in debugging your application, but results in performance loss. @item @code{--enable-wam-profile=yes} allows profiling of abstract machine instructions. This is useful when developing YAP, should not be so useful for normal users. @item @code{--enable-condor=yes} allows using the Condor system that support High Throughput Computing (HTC) on large collections of distributively owned computing resources. @item @code{--enable-tabling=yes} allows tabling support. This option is still experimental. @item @code{--enable-parallelism=@{env-copy,sba,a-cow@}} allows or-parallelism supported by one of these three forms. This option is still highly experimental. @item @code{--with-max-workers} allows definition of the maximum number of parallel processes (its value can be consulted at runtime using the flag @code{max_workers}). @item @code{--with-gmp[=DIR]} give a path to where one can find the @code{GMP} library if not installed in the default path. @item @code{--enable-threads} allows using of the multi-threading predicates provided by YAP. Depending on the operating system, the option @code{--enable-pthread-locking} may also need to be used. @item @code{--with-max-threads} allows definition of the maximum number of threads (the default value is 1024; its value can be consulted at runtime using the flag @code{max_threads}). @end itemize Next section discusses machine dependent details. @node Machine Options, , Configuration Options,Install @section Tuning YAP for a Particular Machine and Compiler @cindex machine optimizations The default options should give you best performance under @code{GCC}. Although the system is tuned for this compiler we have been able to compile versions of YAP under lcc in Linux, Sun's cc compiler, IBM's xlc, SGI's cc, and Microsoft's Visual C++ 6.0. @menu * Tuning for GCC:: Using the GNUCC compiler * Compiling Under Visual C++:: Using Microsoft's Visual C++ environment * Tuning for SGI cc:: Compiling Under SGI's @code{cc} @end menu @node Tuning for GCC, Compiling Under Visual C++, , Machine Options @section Tuning YAP for @code{GCC}. YAP has been developed to take advantage of @code{GCC} (but not to depend on it). The major advantage of @code{GCC} is threaded code and explicit register reservation. YAP is set by default to compile with the best compilation flags we know. Even so, a few specific options reduce portability. The option @itemize @bullet @item @code{--enable-max-performance=yes} will try to support the best available flags for a specific architectural model. Currently, the option assumes a recent version of @code{GCC}. @item @code{--enable-debug-yap} compiles YAP so that it can be debugged by tools such as @code{dbx} or @code{gdb}. @end itemize Here follow a few hints: On x86 machines the flags: @example YAP_EXTRAS= ... -DBP_FREE=1 @end example tells us to use the @code{%bp} register (frame-pointer) as the emulator's program counter. This seems to be stable and is now default. On Sparc/Solaris2 use: @example YAP_EXTRAS= ... -mno-app-regs -DOPTIMISE_ALL_REGS_FOR_SPARC=1 @end example and YAP will get two extra registers! This trick does not work on SunOS 4 machines. Note that versions of GCC can be tweaked to recognize different processors within the same instruction set, e.g. 486, Pentium, and PentiumPro for the x86; or Ultrasparc, and Supersparc for Sparc. Unfortunately, some of these tweaks do may make YAP run slower or not at all in other machines with the same instruction set, so they cannot be made default. Last, the best options also depends on the version of GCC you are using, and it is a good idea to consult the GCC manual under the menus "Invoking GCC"/"Submodel Options". Specifically, you should check @code{-march=XXX} for recent versions of GCC/EGCS. In the case of @code{GCC2.7} and other recent versions of @code{GCC} you can check: @table @code @item 486: In order to take advantage of 486 specific optimizations in GCC 2.7.*: @example YAP_EXTRAS= ... -m486 -DBP_FREE=1 @end example @item Pentium: @example YAP_EXTRAS= ... -m486 -malign-loops=2 -malign-jumps=2 \ -malign-functions=2 @end example @item PentiumPro and other recent Intel and AMD machines: PentiumPros are known not to require alignment. Check your version of @code{GCC} for the best @code{-march} option. @item Super and UltraSparcs: @example YAP_EXTRAS= ... -msupersparc @end example @item MIPS: if have a recent machine and you need a 64 bit wide address space you can use the abi 64 bits or eabi option, as in: @example CC="gcc -mabi=64" ./configure --... @end example Be careful. At least for some versions of @code{GCC}, compiling with @code{-g} seems to result in broken code. @item WIN32: GCC is distributed in the MINGW32 and CYGWIN packages. The Mingw32 environment is available from the URL: @code{http://www.mingw.org} You will need to install the @code{msys} and @code{mingw} packages. You should be able to do configure, make and make install. If you use mingw32 you may want to search the contributed packages for the @code{gmp} multi-precision arithmetic library. If you do setup YAP with @code{gmp} note that @code{libgmp.dll} must be in the path, otherwise YAP will not be able to execute. CygWin environment is available from the URL: @code{http://www.cygwin.com} @noindent and mirrors. We suggest using recent versions of the cygwin shell. The compilation steps under the cygwin shell are as follows: @example mkdir cyg $YAPSRC/configure --enable-coroutining \\ --enable-depth-limit \\ --enable-max-performance make make install @end example By default, YAP will use the @code{-mno-cygwin} option to disable the use of the cygwin dll and to enable the mingw32 subsystem instead. YAP thus will not need the cygwin dll. It instead accesses the system's @code{CRTDLL.DLL} @code{C} run time library supplied with Win32 platforms through the mingw32 interface. Note that some older WIN95 systems may not have @code{CRTDLL.DLL}, in this case it should be sufficient to import the file from a newer WIN95 or WIN98 machine. You should check the default installation path which is set to @code{/YAP} in the standard Makefile. This string will usually be expanded into @code{c:\YAP} by Windows. The cygwin environment does not provide @t{gmp} on the MINGW subsystem. You can fetch a dll for the @t{gmp} library from @url{http://www.sf.net/projects/mingwrep}. It is also possible to configure YAP to be a part of the cygwin environment. In this case you should use: @example mkdir cyg $YAPSRC/configure --enable-max-performance \\ --enable-cygwin=yes make make install @end example YAP will then compile using the cygwin library and will be installed in cygwin's @code{/usr/local}. You can use YAP from a cygwin console, or as a standalone application as long as it can find @code{cygwin1.dll} in its path. Note that you may use to use @code{--enable-depth-limit} for Aleph compatibility, and that you may want to be sure that GMP is installed. @end table @node Compiling Under Visual C++, Tuning for SGI cc, Tuning for GCC, Machine Options @subsection Compiling Under Visual C++ YAP compiles cleanly under Microsoft's Visual C++ release 6.0. We next give a step-by-step tutorial on how to compile YAP manually using this environment. First, it is a good idea to build YAP as a DLL: @enumerate @item create a project named yapdll using File.New. The project will be a DLL project, initially empty. Notice that either the project is named yapdll or you must replace the preprocessors variable @var{YAPDLL_EXPORTS} to match your project names in the files @code{YAPInterface.h} and @code{c_interface.c}. @item add all .c files in the @var{$YAPSRC/C} directory and in the @var{$YAPSRC\OPTYAP} directory to the Project's @code{Source Files} (use FileView). @item add all .h files in the @var{$YAPSRC/H} directory, @var{$YAPSRC\include} directory and in the @var{$YAPSRC\OPTYAP} subdirectory to the Project's @code{Header Files}. @item Ideally, you should now use @code{m4} to generate extra .h from .m4 files and use @code{configure} to create a @code{config.h}. Or, you can be lazy, and fetch these files from @var{$YAPSRC\VC\include}. @item You may want to go to @code{Build.Set Active Configuration} and set @code{Project Type} to @code{Release} @item To use YAP's own include directories you have to set the Project option @code{Project.Project Settings.C/C++.Preprocessor.Additional Include Directories} to include the directories @var{$YAPSRC\H}, @var{$YAPSRC\VC\include}, @var{$YAPSRC\OPTYAP} and @var{$YAPSRC\include}. The syntax is: @example $YAPSRC\H, $YAPSRC\VC\include, $YAPSRC\OPTYAP, $YAPSRC\include @end example @item Build: the system should generate an @code{yapdll.dll} and an @code{yapdll.lib}. @item Copy the file @code{yapdll.dll} to your path. The file @code{yapdll.lib} should also be copied to a location where the linker can find it. @end enumerate Now you are ready to create a console interface for YAP: @enumerate @item create a second project say @code{wyap} with @code{File.New}. The project will be a WIN32 console project, initially empty. @item add @var{$YAPSRC\console\yap.c} to the @code{Source Files}. @item add @var{$YAPSRC\VC\include\config.h} and the files in @var{$YAPSRC\include} to the @code{Header Files}. @item You may want to go to @code{Build.Set Active Configuration} and set @code{Project Type} to @code{Release}. @item you will eventually need to bootstrap the system by booting from @code{boot.yap}, so write: @example -b $YAPSRC\pl\boot.yap @end example in @code{Project.Project Settings.Debug.Program Arguments}. @item You need the sockets and yap libraries. Add @example ws2_32.lib yapdll.lib to @end example to to @code{Project.Project Settings.Link.Object/Library Modules} You may also need to set the @code{Link Path} so that VC++ will find @code{yapdll.lib}. @item set @code{Project.Project Settings.C/C++.Preprocessor.Additional Include Directories} to include the @var{$YAPSRC/VC/include} and @var{$YAPSRC/include}. The syntax is: @example $YAPSRC\VC\include, $YAPSRC\include @end example @item Build the system. @item Use @code{Build.Start Debug} to boot the system, and then create the saved state with @example ['$YAPSRC\\pl\\init']. save_program(startup). ^Z @end example That's it, you've got YAP and the saved state! @end enumerate The $YAPSRC\VC directory has the make files to build YAP4.3.17 under VC++ 6.0. @node Tuning for SGI cc, , Compiling Under Visual C++ ,Machine Options @subsection Compiling Under SGI's cc YAP should compile under the Silicon Graphic's @code{cc} compiler, although we advise using the GNUCC compiler, if available. @table @code @item 64 bit Support for 64 bits should work by using (under Bourne shell syntax): @example CC="cc -64" $YAP_SRC_PATH/configure --... @end example @end table @node Run, Syntax, Install, Top @chapter Running YAP @menu * Running YAP Interactively:: Interacting with YAP * Running Prolog Files:: Running Prolog files as scripts @end menu @cindex booting We next describe how to invoke YAP in Unix systems. @node Running YAP Interactively, ,Running Prolog Files,Run @section Running YAP Interactively Most often you will want to use YAP in interactive mode. Assuming that YAP is in the user's search path, the top-level can be invoked under Unix with the following command: @example yap [-s n] [-h n] [-a n] [-c IP_HOST port ] [filename] @end example @noindent All the arguments and flags are optional and have the following meaning: @table @code @item -? print a short error message. @item -s @var{n} allocate @var{n} K bytes for local and global stacks @item -h @var{n} allocate @var{n} K bytes for heap and auxiliary stacks @item -t @var{n} allocate @var{n} K bytes for the trail stack @item -l @var{YAP_FILE} compile the Prolog file @var{YAP_FILE} before entering the top-level. @item -L @var{YAP_FILE} compile the Prolog file @var{YAP_FILE} and then halt. This option is useful for implementing scripts. @item -g @var{Goal} run the goal @var{Goal} before top-level. The goal is converted from an atom to a Prolog term. @item -z @var{Goal} run the goal @var{Goal} as top-level. The goal is converted from an atom to a Prolog term. @item -b @var{BOOT_FILE} boot code is in Prolog file @var{BOOT_FILE}. The filename must define the predicate @code{'$live'/0}. @item -c @t{IP_HOST} @t{port} connect standard streams to host @t{IP_HOST} at port @t{port} @item filename restore state saved in the given file @item -f do not consult initial files @item -q do not print informational messages @item -- separator for arguments to Prolog code. These arguments are visible through the @code{unix/1} built-in predicate. @end table Note that YAP will output an error message on the following conditions: @itemize @bullet @item a file name was given but the file does not exist or is not a saved YAP state; @item the necessary amount of memory could not be allocated; @item the allocated memory is not enough to restore the state. @end itemize When restoring a saved state, YAP will allocate the same amount of memory as that in use when the state was saved, unless a different amount is specified by flags in the command line. By default, YAP restores the file @samp{startup} from the current directory or from the YAP library. @cindex environment variables @findex YAPBINDIR @itemize @bullet @item YAP usually boots from a saved state. The saved state will use the default installation directory to search for the YAP binary unless you define the environment variable YAPBINDIR. @findex YAPLIBDIR @item YAP always tries to find saved states from the current directory first. If it cannot it will use the environment variable YAPLIBDIR, if defined, or search the default library directory. @findex YAPSHAREDIR @item YAP will try to find library files from the YAPSHAREDIR/library directory. @end itemize @node Running Prolog Files, Running YAP Interactively, , Run @section Running Prolog Files YAP can also be used to run Prolog files as scripts, at least in Unix-like environments. A simple example is shown next: @example @cartouche #!/usr/local/bin/yap -L -- # # Hello World script file using YAP # # put a dot because of syntax errors . :- write('Hello World'), nl. @end cartouche @end example The @code{#!} characters specify that the script should call the binary file YAP. Notice that many systems will require the complete path to the YAP binary. The @code{-L} flag indicates that YAP should consult the current file when booting and then halt. The remaining arguments are then passed to YAP. Note that YAP will skip the first lines if they start with @code{#} (the comment sign for Unix's shell). YAP will consult the file and execute any commands. A slightly more sophisticated example is: @example @cartouche #!/usr/bin/yap -L -- # # Hello World script file using YAP # . :- initialization(main). main :- write('Hello World'), nl. @end cartouche @end example The @code{initialization} directive tells YAP to execute the goal main after consulting the file. Source code is thus compiled and @code{main} executed at the end. The @code{.} is useful while debugging the script as a Prolog program: it guarantees that the syntax error will not propagate to the Prolog code. Notice that the @code{--} is required so that the shell passes the extra arguments to YAP. As an example, consider the following script @code{dump_args}: @example @cartouche #!/usr/bin/yap -L -- #. main( [] ). main( [H|T] ) :- write( H ), nl, main( T ). :- unix( argv(AllArgs) ), main( AllArgs ). @end cartouche @end example If you this run this script with the arguments: @example ./dump_args -s 10000 @end example @noindent the script will start an YAP process with stack size @code{10MB}, and the list of arguments to the process will be empty. Often one wants to run the script as any other program, and for this it is convenient to ignore arguments to YAP. This is possible by using @code{L --} as in the next version of @code{dump_args}: @example @cartouche #!/usr/bin/yap -L -- main( [] ). main( [H|T] ) :- write( H ), nl, main( T ). :- unix( argv(AllArgs) ), main( AllArgs ). @end cartouche @end example The @code{--} indicates the next arguments are not for YAP. Instead, they must be sent directly to the @code{argv} built-in. Hence, running @example ./dump_args test @end example @noindent will write @code{test} on the standard output. @node Syntax, Loading Programs, Run, Top @chapter Syntax We will describe the syntax of YAP at two levels. We first will describe the syntax for Prolog terms. In a second level we describe the @i{tokens} from which Prolog @i{terms} are built. @menu * Formal Syntax:: Syntax of terms * Tokens:: Syntax of Prolog tokens * Encoding:: How characters are encoded and Wide Character Support @end menu @node Formal Syntax, Tokens, ,Syntax @section Syntax of Terms @cindex syntax Below, we describe the syntax of YAP terms from the different classes of tokens defined above. The formalism used will be @emph{BNF}, extended where necessary with attributes denoting integer precedence or operator type. @example @code{ term ----> subterm(1200) end_of_term_marker subterm(N) ----> term(M) [M <= N] term(N) ----> op(N, fx) subterm(N-1) | op(N, fy) subterm(N) | subterm(N-1) op(N, xfx) subterm(N-1) | subterm(N-1) op(N, xfy) subterm(N) | subterm(N) op(N, yfx) subterm(N-1) | subterm(N-1) op(N, xf) | subterm(N) op(N, yf) term(0) ----> atom '(' arguments ')' | '(' subterm(1200) ')' | '@{' subterm(1200) '@}' | list | string | number | atom | variable arguments ----> subterm(999) | subterm(999) ',' arguments list ----> '[]' | '[' list_expr ']' list_expr ----> subterm(999) | subterm(999) list_tail list_tail ----> ',' list_expr | ',..' subterm(999) | '|' subterm(999) } @end example @noindent Notes: @itemize @bullet @item @i{op(N,T)} denotes an atom which has been previously declared with type @i{T} and base precedence @i{N}. @item Since ',' is itself a pre-declared operator with type @i{xfy} and precedence 1000, is @i{subterm} starts with a '(', @i{op} must be followed by a space to avoid ambiguity with the case of a functor followed by arguments, e.g.: @example @code{ + (a,b) [the same as '+'(','(a,b)) of arity one]} @end example versus @example @code{ +(a,b) [the same as '+'(a,b) of arity two]} @end example @item In the first rule for term(0) no blank space should exist between @i{atom} and '('. @item @cindex end of term Each term to be read by the YAP parser must end with a single dot, followed by a blank (in the sense mentioned in the previous paragraph). When a name consisting of a single dot could be taken for the end of term marker, the ambiguity should be avoided by surrounding the dot with single quotes. @end itemize @node Tokens, Encoding, Formal Syntax, Syntax @section Prolog Tokens @cindex token Prolog tokens are grouped into the following categories: @menu * Numbers:: Integer and Floating-Point Numbers * Strings:: Sequences of Characters * Atoms:: Atomic Constants * Variables:: Logical Variables * Punctuation Tokens:: Tokens that separate other tokens * Layout:: Comments and Other Layout Rules @end menu @node Numbers, Strings, ,Tokens @subsection Numbers @cindex number Numbers can be further subdivided into integer and floating-point numbers. @menu * Integers:: How Integers are read and represented * Floats:: Floating Point Numbers @end menu @node Integers, Floats, ,Numbers @subsubsection Integers @cindex integer Integer numbers are described by the following regular expression: @example @code{ := @{+|0@{xXo@}@}+ } @end example @noindent where @{...@} stands for optionality, @i{+} optional repetition (one or more times), @i{} denotes one of the characters 0 ... 9, @i{|} denotes or, and @i{} denotes the character "'". The digits before the @i{} character, when present, form the number basis, that can go from 0, 1 and up to 36. Letters from @code{A} to @code{Z} are used when the basis is larger than 10. Note that if no basis is specified then base 10 is assumed. Note also that the last digit of an integer token can not be immediately followed by one of the characters 'e', 'E', or '.'. Following the ISO standard, YAP also accepts directives of the form @code{0x} to represent numbers in hexadecimal base and of the form @code{0o} to represent numbers in octal base. For usefulness, YAP also accepts directives of the form @code{0X} to represent numbers in hexadecimal base. Example: the following tokens all denote the same integer @example @code{10 2'1010 3'101 8'12 16'a 36'a 0xa 0o12} @end example Numbers of the form @code{0'a} are used to represent character constants. So, the following tokens denote the same integer: @example @code{0'd 100} @end example YAP (version @value{VERSION}) supports integers that can fit the word size of the machine. This is 32 bits in most current machines, but 64 in some others, such as the Alpha running Linux or Digital Unix. The scanner will read larger or smaller integers erroneously. @node Floats, , Integers,Numbers @subsubsection Floating-point Numbers @cindex floating-point number Floating-point numbers are described by: @example @code{ := +@{+@} @{@}+ |++ @{@{@}+@} } @end example @noindent where @i{} denotes the decimal-point character '.', @i{} denotes one of 'e' or 'E', and @i{} denotes one of '+' or '-'. Examples: @example @code{10.0 10e3 10e-3 3.1415e+3} @end example Floating-point numbers are represented as a double in the target machine. This is usually a 64-bit number. @node Strings, Atoms, Numbers,Tokens @subsection Character Strings @cindex string Strings are described by the following rules: @example string --> '"' string_quoted_characters '"' string_quoted_characters --> '"' '"' string_quoted_characters string_quoted_characters --> '\' escape_sequence string_quoted_characters string_quoted_characters --> string_character string_quoted_characters escape_sequence --> 'a' | 'b' | 'r' | 'f' | 't' | 'n' | 'v' escape_sequence --> '\' | '"' | ''' | '`' escape_sequence --> at_most_3_octal_digit_seq_char '\' escape_sequence --> 'x' at_most_2_hexa_digit_seq_char '\' @end example where @code{string_character} in any character except the double quote and escape characters. Examples: @example @code{"" "a string" "a double-quote:""" } @end example The first string is an empty string, the last string shows the use of double-quoting. The implementation of YAP represents strings as lists of integers. Since YAP 4.3.0 there is no static limit on string size. Escape sequences can be used to include the non-printable characters @code{a} (alert), @code{b} (backspace), @code{r} (carriage return), @code{f} (form feed), @code{t} (horizontal tabulation), @code{n} (new line), and @code{v} (vertical tabulation). Escape sequences also be include the meta-characters @code{\}, @code{"}, @code{'}, and @code{`}. Last, one can use escape sequences to include the characters either as an octal or hexadecimal number. The next examples demonstrates the use of escape sequences in YAP: @example @code{"\x0c\" "\01\" "\f" "\\" } @end example The first three examples return a list including only character 12 (form feed). The last example escapes the escape character. Escape sequences were not available in C-Prolog and in original versions of YAP up to 4.2.0. Escape sequences can be disable by using: @example @code{:- yap_flag(character_escapes,off).} @end example @node Atoms, Variables, Strings, Tokens @subsection Atoms @cindex atom Atoms are defined by one of the following rules: @example atom --> solo-character atom --> lower-case-letter name-character* atom --> symbol-character+ atom --> single-quote single-quote atom --> ''' atom_quoted_characters ''' atom_quoted_characters --> ''' ''' atom_quoted_characters atom_quoted_characters --> '\' atom_sequence string_quoted_characters atom_quoted_characters --> character string_quoted_characters @end example where: @example denotes one of: ! ; denotes one of: # & * + - . / : < = > ? @@ \ ^ ` ~ denotes one of: a...z denotes one of: _ a...z A...Z 0....9 denotes: ' @end example and @code{string_character} denotes any character except the double quote and escape characters. Note that escape sequences in strings and atoms follow the same rules. Examples: @example @code{a a12x '$a' ! => '1 2'} @end example Version @code{4.2.0} of YAP removed the previous limit of 256 characters on an atom. Size of an atom is now only limited by the space available in the system. @node Variables, Punctuation Tokens, Atoms, Tokens @subsection Variables @cindex variable Variables are described by: @example + @end example where @example denotes one of: _ A...Z denotes one of: _ a...z A...Z @end example @cindex anonymous variable If a variable is referred only once in a term, it needs not to be named and one can use the character @code{_} to represent the variable. These variables are known as anonymous variables. Note that different occurrences of @code{_} on the same term represent @emph{different} anonymous variables. @node Punctuation Tokens, Layout, Variables, Tokens @subsection Punctuation Tokens @cindex punctuation token Punctuation tokens consist of one of the following characters: @example @center ( ) , [ ] @{ @} | @end example These characters are used to group terms. @node Layout, ,Punctuation Tokens, Tokens @subsection Layout @cindex comment Any characters with ASCII code less than or equal to 32 appearing before a token are ignored. All the text appearing in a line after the character @i{%} is taken to be a comment and ignored (including @i{%}). Comments can also be inserted by using the sequence @code{/*} to start the comment and @code{*/} to finish it. In the presence of any sequence of comments or layout characters, the YAP parser behaves as if it had found a single blank character. The end of a file also counts as a blank character for this purpose. @node Encoding, , Tokens, Syntax @section Wide Character Support @cindex encodings @menu * Stream Encoding:: How Prolog Streams can be coded * BOM:: The Byte Order Mark @end menu @cindex UTF-8 @cindex Unicode @cindex UCS @cindex internationalization YAP now implements a SWI-Prolog compatible interface to wide characters and the Universal Character Set (UCS). The following text was adapted from the SWI-Prolog manual. YAP now supports wide characters, characters with character codes above 255 that cannot be represented in a single byte. @emph{Universal Character Set} (UCS) is the ISO/IEC 10646 standard that specifies a unique 31-bits unsigned integer for any character in any language. It is a superset of 16-bit Unicode, which in turn is a superset of ISO 8859-1 (ISO Latin-1), a superset of US-ASCII. UCS can handle strings holding characters from multiple languages and character classification (uppercase, lowercase, digit, etc.) and operations such as case-conversion are unambiguously defined. For this reason YAP, following SWI-Prolog, has two representations for atoms. If the text fits in ISO Latin-1, it is represented as an array of 8-bit characters. Otherwise the text is represented as an array of wide chars, which may take 16 or 32 bits. This representational issue is completely transparent to the Prolog user. Users of the foreign language interface sometimes need to be aware of these issues though. Character coding comes into view when characters of strings need to be read from or written to file or when they have to be communicated to other software components using the foreign language interface. In this section we only deal with I/O through streams, which includes file I/O as well as I/O through network sockets. @node Stream Encoding, , BOM, Encoding @subsection Wide character encodings on streams Although characters are uniquely coded using the UCS standard internally, streams and files are byte (8-bit) oriented and there are a variety of ways to represent the larger UCS codes in an 8-bit octet stream. The most popular one, especially in the context of the web, is UTF-8. Bytes 0...127 represent simply the corresponding US-ASCII character, while bytes 128...255 are used for multi-byte encoding of characters placed higher in the UCS space. Especially on MS-Windows the 16-bit Unicode standard, represented by pairs of bytes is also popular. Prolog I/O streams have a property called @emph{encoding} which specifies the used encoding that influence @code{get_code/2} and @code{put_code/2} as well as all the other text I/O predicates. The default encoding for files is derived from the Prolog flag @code{encoding}, which is initialised from the environment. If the environment variable @env{LANG} ends in "UTF-8", this encoding is assumed. Otherwise the default is @code{text} and the translation is left to the wide-character functions of the C-library (note that the Prolog native UTF-8 mode is considerably faster than the generic @code{mbrtowc()} one). The encoding can be specified explicitly in @code{load_files/2} for loading Prolog source with an alternative encoding, @code{open/4} when opening files or using @code{set_stream/2} on any open stream (not yet implemented). For Prolog source files we also provide the @code{encoding/1} directive that can be used to switch between encodings that are compatible to US-ASCII (@code{ascii}, @code{iso_latin_1}, @code{utf8} and many locales). @c See also @c \secref{intsrcfile} for writing Prolog files with non-US-ASCII @c characters and \secref{unicodesyntax} for syntax issues. For additional information and Unicode resources, please visit @uref{http://www.unicode.org/}. YAP currently defines and supports the following encodings: @table @code @item octet Default encoding for @emph{binary} streams. This causes the stream to be read and written fully untranslated. @item ascii 7-bit encoding in 8-bit bytes. Equivalent to @code{iso_latin_1}, but generates errors and warnings on encountering values above 127. @item iso_latin_1 8-bit encoding supporting many western languages. This causes the stream to be read and written fully untranslated. @item text C-library default locale encoding for text files. Files are read and written using the C-library functions @code{mbrtowc()} and @code{wcrtomb()}. This may be the same as one of the other locales, notably it may be the same as @code{iso_latin_1} for western languages and @code{utf8} in a UTF-8 context. @item utf8 Multi-byte encoding of full UCS, compatible to @code{ascii}. See above. @item unicode_be Unicode Big Endian. Reads input in pairs of bytes, most significant byte first. Can only represent 16-bit characters. @item unicode_le Unicode Little Endian. Reads input in pairs of bytes, least significant byte first. Can only represent 16-bit characters. @end table Note that not all encodings can represent all characters. This implies that writing text to a stream may cause errors because the stream cannot represent these characters. The behaviour of a stream on these errors can be controlled using @code{open/4} or @code{set_stream/2} (not implemented). Initially the terminal stream write the characters using Prolog escape sequences while other streams generate an I/O exception. @node BOM, Stream Encoding, , Encoding @subsection BOM: Byte Order Mark @cindex BOM @cindex Byte Order Mark From @ref{Stream Encoding}, you may have got the impression text-files are complicated. This section deals with a related topic, making live often easier for the user, but providing another worry to the programmer. @strong{BOM} or @emph{Byte Order Marker} is a technique for identifying Unicode text-files as well as the encoding they use. Such files start with the Unicode character @code{0xFEFF}, a non-breaking, zero-width space character. This is a pretty unique sequence that is not likely to be the start of a non-Unicode file and uniquely distinguishes the various Unicode file formats. As it is a zero-width blank, it even doesn't produce any output. This solves all problems, or ... Some formats start of as US-ASCII and may contain some encoding mark to switch to UTF-8, such as the @code{encoding="UTF-8"} in an XML header. Such formats often explicitly forbid the the use of a UTF-8 BOM. In other cases there is additional information telling the encoding making the use of a BOM redundant or even illegal. The BOM is handled by the @code{open/4} predicate. By default, text-files are probed for the BOM when opened for reading. If a BOM is found, the encoding is set accordingly and the property @code{bom(true)} is available through @code{stream_property/2}. When opening a file for writing, writing a BOM can be requested using the option @code{bom(true)} with @code{open/4}. @node Loading Programs, Modules, Syntax, Top @chapter Loading Programs @menu Loading Programs * Compiling:: Program Loading and Updating * Setting the Compiler:: Changing the compiler's parameters * Conditional Compilation:: Compiling program fragments * Saving:: Saving and Restoring Programs @end menu @node Compiling, Setting the Compiler, , Loading Programs @section Program loading and updating @table @code @item consult(@var{+F}) @findex consult/1 @snindex consult/1 @cyindex consult/1 Adds the clauses written in file @var{F} or in the list of files @var{F} to the program. In YAP @code{consult/1} does not remove previous clauses for the procedures defined in @var{F}. Moreover, note that all code in YAP is compiled. @item reconsult(@var{+F}) @findex reconsult/1 @snindex reconsult/1 @cyindex reconsult/1 Updates the program replacing the previous definitions for the predicates defined in @var{F}. @item [@var{+F}] @findex []/1 @saindex []/1 @cyindex []/1 The same as @code{consult(F)}. @item [-@var{+F}] @findex [-]/1 @saindex [-]/1 @cyindex [-]/1 The same as @code{reconsult(F)} Example: @example ?- [file1, -file2, -file3, file4]. @end example @noindent will consult @code{file1} @code{file4} and reconsult @code{file2} and @code{file3}. @item compile(@var{+F}) @findex compile/1 @syindex compile/1 @cnindex compile/1 @noindent In YAP, the same as @code{reconsult/1}. @item load_files(@var{+Files}, @var{+Options}) @findex load_files/2 @syindex load_files/2 @cnindex load_files/2 @noindent General implementation of @code{consult}. Execution is controlled by the following flags: @table @code @item autoload(+@var{Autoload}) SWI-compatible option where if @var{Autoload} is @code{true} predicates are loaded on first call. Currently not supported. @item derived_from(+@var{File}) SWI-compatible option to control make. Currently not supported. @item encoding(+@var{Encoding}) Character encoding used in consulting files. Please @pxref{Encoding} for supported encodings. @item expand(+@var{Bool}) Not yet implemented. In SWI-Prolog, if @code{true}, run the filenames through @code{expand_file_name/2} and load the returned files. Default is false, except for @code{consult/1} which is intended for interactive use. @item if(+@var{Condition}) Load the file only if the specified @var{Condition} is satisfied. The value @code{true} the file unconditionally, @code{changed} loads the file if it was not loaded before, or has been modified since it was loaded the last time, @code{not_loaded} loads the file if it was not loaded before. @item imports(+@var{ListOrAll}) If @code{all} and the file is a module file, import all public predicates. Otherwise import only the named predicates. Each predicate is referred to as @code{/}. This option has no effect if the file is not a module file. @item must_be_module(+@var{Bool}) If true, raise an error if the file is not a module file. Used by @code{use_module/[1,2]}. @c qcompile(Bool) @c If this call appears in a directive of a file that is compiled into Quick Load Format using qcompile/1 and this flag is true, the contents of the argument files are included in the .qlf file instead of the loading directive. @item silent(+@var{Bool}) If true, load the file without printing a message. The specified value is the default for all files loaded as a result of loading the specified files. @item stream(+@var{Input}) This SWI-Prolog extension compiles the data from the stream @var{Input}. If this option is used, @var{Files} must be a single atom which is used to identify the source-location of the loaded clauses as well as remove all clauses if the data is re-consulted. This option is added to allow compiling from non-file locations such as databases, the web, the user (see consult/1) or other servers. @item compilation_mode(+@var{Mode}) This extension controls how procedures are compiled. If @var{Mode} is @code{compile} clauses are compiled and no source code is stored; is @code{assert_all} clauses are asserted into the data-base. @end table @item ensure_loaded(@var{+F}) [ISO] @findex ensure_loaded/1 @syindex compile/1 @cnindex compile/1 When the files specified by @var{F} are module files, @code{ensure_loaded/1} loads them if they have note been previously loaded, otherwise advertises the user about the existing name clashes and prompts about importing or not those predicates. Predicates which are not public remain invisible. When the files are not module files, @code{ensure_loaded/1} loads them if they have not been loaded before, does nothing otherwise. @var{F} must be a list containing the names of the files to load. @item include(@var{+F}) [ISO] @findex include/1 (directive) @snindex compile/1 (directive) @cnindex compile/1 (directive) The @code{include} directive includes the text files or sequence of text files specified by @var{F} into the file being currently consulted. @end table @node Setting the Compiler, Conditional Compilation, Compiling, Loading Programs @section Changing the Compiler's Behavior This section presents a set of built-ins predicates designed to set the environment for the compiler. @table @code @item source_mode(-@var{O},+@var{N}) @findex source_mode/2 @snindex source_mode/2 @cnindex source_mode/2 The state of source mode can either be on or off. When the source mode is on, all clauses are kept both as compiled code and in a "hidden" database. @var{O} is unified with the previous state and the mode is set according to @var{N}. @item source @findex source/0 @snindex source/0 @cnindex source/0 After executing this goal, YAP keeps information on the source of the predicates that will be consulted. This enables the use of @code{listing/0}, @code{listing/1} and @code{clause/2} for those clauses. The same as @code{source_mode(_,on)} or as declaring all newly defined static procedures as @code{public}. @item no_source @findex no_source/0 @snindex no_source/0 @cnindex no_source/0 The opposite to @code{source}. The same as @code{source_mode(_,off)}. @item compile_expressions @findex compile_expressions/0 @snindex compile_expressions/0 @cnindex compile_expressions/0 After a call to this predicate, arithmetical expressions will be compiled. (see example below). This is the default behavior. @item do_not_compile_expressions @findex do_not_compile_expressions/0 @snindex do_not_compile_expressions/0 @cnindex do_not_compile_expressions/0 After a call to this predicate, arithmetical expressions will not be compiled. @example ?- source, do_not_compile_expressions. yes ?- [user]. | p(X) :- X is 2 * (3 + 8). | :- end_of_file. ?- compile_expressions. yes ?- [user]. | q(X) :- X is 2 * (3 + 8). | :- end_of_file. :- listing. p(A):- A is 2 * (3 + 8). q(A):- A is 22. @end example @item hide(+@var{Atom}) @findex hide/1 @snindex hide/1 @cnindex hide/1 Make atom @var{Atom} invisible. @item unhide(+@var{Atom}) @findex unhide/1 @snindex unhide/1 @cnindex unhide/1 Make hidden atom @var{Atom} visible. @item hide_predicate(+@var{Pred}) @findex hide_predicate/1 @snindex hide_predicate/1 @cnindex hide_predicate/1 Make predicate @var{Pred} invisible to @code{current_predicate/2}, @code{listing}, and friends. @item expand_exprs(-@var{O},+@var{N}) @findex expand_exprs/2 @snindex expand_exprs/2 @cyindex expand_exprs/2 Puts YAP in state @var{N} (@code{on} or @code{off}) and unify @var{O} with the previous state, where @var{On} is equivalent to @code{compile_expressions} and @code{off} is equivalent to @code{do_not_compile_expressions}. This predicate was kept to maintain compatibility with C-Prolog. @item path(-@var{D}) @findex path/1 @snindex path/1 @cnindex path/1 Unifies @var{D} with the current directory search-path of YAP. Note that this search-path is only used by YAP to find the files for @code{consult/1}, @code{reconsult/1} and @code{restore/1} and should not be taken for the system search path. @item add_to_path(+@var{D}) @findex add_to_path/1 @snindex path/1 @cnindex path/1 Adds @var{D} to the end of YAP's directory search path. @item add_to_path(+@var{D},+@var{N}) @findex add_to_path/2 @snindex path/1 @cnindex path/1 Inserts @var{D} in the position, of the directory search path of YAP, specified by @var{N}. @var{N} must be either of @code{first} or @code{last}. @item remove_from_path(+@var{D}) @findex remove_from_path/1 @snindex remove_from_path/1 @cnindex remove_from_path/1 Remove @var{D} from YAP's directory search path. @item style_check(+@var{X}) @findex style_check/1 @snindex style_check/1 @cnindex style_check/1 Turns on style checking according to the attribute specified by @var{X}, which must be one of the following: @table @code @item single_var Checks single occurrences of named variables in a clause. @item discontiguous Checks non-contiguous clauses for the same predicate in a file. @item multiple Checks the presence of clauses for the same predicate in more than one file when the predicate has not been declared as @code{multifile} @item all Performs style checking for all the cases mentioned above. @end table By default, style checking is disabled in YAP unless we are in @code{sicstus} or @code{iso} language mode. The @code{style_check/1} built-in is now deprecated. Please use the @code{set_prolog_flag/1} instead. @item no_style_check(+@var{X}) @findex no_style_check/1 @snindex style_check/1 @cnindex style_check/1 Turns off style checking according to the attribute specified by @var{X}, which has the same meaning as in @code{style_check/1}. The @code{no_style_check/1} built-in is now deprecated. Please use the @code{set_prolog_flag/1} instead. @item multifile @var{P} [ISO] @findex multifile/1 (directive) @syindex multifile/1 (directive) @cnindex multifile/1 (directive) Instructs the compiler about the declaration of a predicate @var{P} in more than one file. It must appear in the first of the loaded files where the predicate is declared, and before declaration of any of its clauses. Multifile declarations affect @code{reconsult/1} and @code{compile/1}: when a multifile predicate is reconsulted, only the clauses from the same file are removed. Since YAP4.3.0 multifile procedures can be static or dynamic. @item discontiguous(+@var{G}) [ISO] @findex discontiguous/1 (directive) @syindex discontiguous/1 (directive) @cnindex discontiguous/1 (directive) Declare that the arguments are discontiguous procedures, that is, clauses for discontigous procedures may be separated by clauses from other procedures. @item initialization(+@var{G}) [ISO] @findex initialization/1 (directive) @snindex initialization/1 (directive) @cnindex initialization/1 (directive) The compiler will execute goals @var{G} after consulting the current file. @item library_directory(+@var{D}) @findex library_directory/1 @snindex library_directory/1 @cnindex library_directory/1 Succeeds when @var{D} is a current library directory name. Library directories are the places where files specified in the form @code{library(@var{File})} are searched by the predicates @code{consult/1}, @code{reconsult/1}, @code{use_module/1} or @code{ensure_loaded/1}. @item file_search_path(+@var{NAME},-@var{DIRECTORY}) @findex file_search_path/2 @syindex file_search_path/2 @cnindex file_search_path/2 Allows writing file names as compound terms. The @var{NAME} and @var{DIRECTORY} must be atoms. The predicate may generate multiple solutions. The predicate is originally defined as follows: @example file_search_path(library,A) :- library_directory(A). file_search_path(system,A) :- prolog_flag(host_type,A). @end example Thus, @code{[library(A)]} will search for a file using @code{library_directory/1} to obtain the prefix. @item library_directory(+@var{D}) @findex library_directory/1 @snindex library_directory/1 @cnindex library_directory/1 Succeeds when @var{D} is a current library directory name. Library directories are the places where files specified in the form @code{library(@var{File})} are searched by the predicates @code{consult/1}, @code{reconsult/1}, @code{use_module/1} or @code{ensure_loaded/1}. @item prolog_file_name(+@var{Name},-@var{FullPath}) @findex prolog_file_name/2 @syindex prolog_file_name/1 @cnindex prolog_file_name/2 Unify @var{FullPath} with the absolute path YAP would use to consult file @var{Name}. @item public @var{P} [ISO] @findex public/1 (directive) @snindex public/1 (directive) @cnindex public/1 (directive) Instructs the compiler that the source of a predicate of a list of predicates @var{P} must be kept. This source is then accessible through the @code{clause/2} procedure and through the @code{listing} family of built-ins. Note that all dynamic procedures are public. The @code{source} directive defines all new or redefined predicates to be public. Since YAP4.3.0 multifile procedures can be static or dynamic. @end table @node Conditional Compilation, Saving, Setting the Compiler, Loading Programs @section Conditional Compilation @c \index{if, directive}% Conditional compilation builds on the same principle as @code{term_expansion/2}, @code{goal_expansion/2} and the expansion of grammar rules to compile sections of the source-code conditionally. One of the reasons for introducing conditional compilation is to simplify writing portable code. @c See \secref{dialect} @c for more information. Here is a simple example: @c @table code @c :- if(\+source_exports(library(lists), suffix/2)). @c suffix(Suffix, List) :- @c append(_, Suffix, List). @c :- endif. @c \end{code} Note that these directives can only be appear as separate terms in the input. Typical usage scenarios include: @itemize @bullet @item Load different libraries on different dialects @item Define a predicate if it is missing as a system predicate @item Realise totally different implementations for a particular part of the code due to different capabilities. @item Realise different configuration options for your software. @end itemize @table @code @item if(+@var{Goal}) @findex if/1 directive @snindex if/1 @cnindex if/1 Compile subsequent code only if @var{Goal} succeeds. For enhanced portability, @var{Goal} is processed by @code{expand_goal/2} before execution. If an error occurs, the error is printed and processing proceeds as if @var{Goal} has failed. @item else @findex else/0 directive @snindex else/0 @cnindex else/0 Start `else' branch. @item endif @findex endif/0 directive @snindex endif/0 @cnindex endif/0 End of conditional compilation. @item elif(+@var{Goal}) @findex elif/1 directive @snindex elif/1 @cnindex elif/1 Equivalent to @code{:- else. :-if(Goal) ... :- endif.} In a sequence as below, the section below the first matching elif is processed, If no test succeeds the else branch is processed. @example :- if(test1). section_1. :- elif(test2). section_2. :- elif(test3). section_3. :- else. section_else. :- endif. @end example @end table @node Saving, , Conditional Compilation, Loading Programs @section Saving and Loading Prolog States @table @code @item save(+@var{F}) @findex save/1 @snindex save/1 @cyindex save/1 Saves an image of the current state of YAP in file @var{F}. From @strong{YAP4.1.3} onwards, YAP saved states are executable files in the Unix ports. @item save(+@var{F},-@var{OUT}) @findex save/2 @snindex save/2 @cnindex save/2 Saves an image of the current state of YAP in file @var{F}. From @strong{YAP4.1.3} onwards, YAP saved states are executable files in the Unix ports. Unify @var{OUT} with 1 when saving the file and @var{OUT} with 0 when restoring the saved state. @item save_program(+@var{F}) @findex save_program/1 @syindex save_program/1 @cnindex save_program/1 Saves an image of the current state of the YAP database in file @var{F}. @item save_program(+@var{F}, :@var{G}) @findex save_program/2 @syindex save_program/2 @cnindex save_program/2 Saves an image of the current state of the YAP database in file @var{F}, and guarantee that execution of the restored code will start by trying goal @var{G}. @item restore(+@var{F}) @findex restore/1 @syindex restore/1 @cnindex restore/1 Restores a previously saved state of YAP from file @var{F}. YAP always tries to find saved states from the current directory first. If it cannot it will use the environment variable YAPLIBDIR, if defined, or search the default library directory. @end table @node Modules, Built-ins, Loading Programs, Top @chapter The Module System Module systems are quite important for the development of large applications. YAP implements a module system compatible with the Quintus Prolog module system. The YAP module system is predicate-based. This means a module consists of a set of predicates (or procedures), such that some predicates are public and the others are local to a module. Atoms and terms in general are global to the system. Moreover, the module system is flat, meaning that we do not support an hierarchy of modules. Modules can automatically import other modules, though. For compatibility with other module systems the YAP module system is non-strict, meaning both that there is both a way to access predicates private to a module and that is possible to declare predicates for a module from some other module. YAP allows one to ignore the module system if one does not want to use it. Last note that using the module system does not introduce any significant overheads: only meta-calls that cross module boundaries are slowed down by the presence of modules. @menu * Module Concepts:: The Key Ideas in Modules * Defining Modules:: How To Define a New Module * Using Modules:: How to Use a Module * Meta-Predicates in Modules:: How to Handle New Meta-Predicates * Re-Exporting Modules:: How to Re-export Predicates From Other Modules @end menu @node Module Concepts, Defining Modules, , Modules @section Module Concepts The YAP module system applies to predicates. All predicates belong to a module. System predicates belong to the module @code{primitives}, and by default new predicates belong to the module @code{user}. Predicates from the module @code{primitives} are automatically visible to every module. Every predicate must belong to a module. This module is called its @emph{source module}. By default, the source module for a clause occurring in a source file with a module declaration is the declared module. For goals typed in a source file without module declarations, their module is the module the file is being loaded into. If no module declarations exist, this is the current @emph{type-in module}. The default type-in module is @code{user}, but one can set the current module by using the built-in @code{module/1}. Note that in this module system one can explicitly specify the source mode for a clause by prefixing a clause with its module, say: @example user:(a :- b). @end example @noindent In fact, to specify the source module for a clause it is sufficient to specify the source mode for the clause's head: @example user:a :- b. @end example @noindent The rules for goals are similar. If a goal appears in a text file with a module declaration, the goal's source module is the declared module. Otherwise, it is the module the file is being loaded into or the type-in module. One can override this rule by prefixing a goal with the module it is supposed to be executed into, say: @example nasa:launch(apollo,13). @end example will execute the goal @code{launch(apollo,13)} as if the current source module was @code{nasa}. Note that this rule breaks encapsulation and should be used with care. @node Defining Modules, Using Modules, Module Concepts, Modules @section Defining a New Module A new module is defined by a @code{module} declaration: @table @code @item module(+@var{M},+@var{L}) @findex module/2 (directive) @syindex module/2 (directive) @cnindex module/2 (directive) This predicate defines the file where it appears as a module file; it must be the first declaration in the file. @var{M} must be an atom specifying the module name; @var{L} must be a list containing the module's public predicates specification, in the form @code{[predicate_name/arity,...]}. The public predicates of a module file can be made accessible by other files through the predicates @code{consult/1}, @code{reconsult/1}, @code{ensure_loaded/1} or @code{use_module/2}. The non-public predicates of a module file are not visible by other files; they can, however, be accessed if the module name is prefixed to the file name through the @code{:/2} operator. @end table The built-in @code{module/1} sets the current source module: @table @code @item module(+@var{M},+@var{L}, +@var{Options}) @findex module/3 (directive) @syindex module/3 (directive) @cnindex module/3 (directive) Similar to @code{module/2}, this predicate defines the file where it appears as a module file; it must be the first declaration in the file. @var{M} must be an atom specifying the module name; @var{L} must be a list containing the module's public predicates specification, in the form @code{[predicate_name/arity,...]}. The last argument @var{Options} must be a list of options, which can be: @table @code @item filename the filename for a module to import into the current module. @item library(file) a library file to import into the current module. @item hide(@var{Opt}) if @var{Opt} is @code{false}, keep source code for current module, if @code{true}, disable. @end table @item module(+@var{M}) @findex module/1 @syindex module/1 @cnindex module/1 Defines @var{M} to be the current working or type-in module. All files which are not binded to a module are assumed to belong to the working module (also referred to as type-in module). To compile a non-module file into a module which is not the working one, prefix the file name with the module name, in the form @code{@var{Module}:@var{File}}, when loading the file. @end table @node Using Modules, Meta-Predicates in Modules, Defining Modules, Modules @section Using Modules By default, all procedures to consult a file will load the modules defined therein. The two following declarations allow one to import a module explicitly. They differ on whether one imports all predicate declared in the module or not. @table @code @item use_module(+@var{F}) @findex use_module/1 @syindex use_module/1 @cnindex use_module/1 Loads the files specified by @var{F}, importing all their public predicates. Predicate name clashes are resolved by asking the user about importing or not the predicate. A warning is displayed when @var{F} is not a module file. @item use_module(+@var{F},+@var{L}) @findex use_module/2 @syindex use_module/2 @cnindex use_module/2 Loads the files specified by @var{F}, importing the predicates specified in the list @var{L}. Predicate name clashes are resolved by asking the user about importing or not the predicate. A warning is displayed when @var{F} is not a module file. @item use_module(?@var{M},?@var{F},+@var{L}) @findex use_module/3 @syindex use_module/3 @cnindex use_module/3 If module @var{M} has been defined, import the procedures in @var{L} to the current module. Otherwise, load the files specified by @var{F}, importing the predicates specified in the list @var{L}. @end table @node Meta-Predicates in Modules, Re-Exporting Modules, Using Modules, Modules @section Meta-Predicates in Modules The module system must know whether predicates operate on goals or clauses. Otherwise, such predicates would call a goal in the module they were defined, instead of calling it in the module they are currently executing. So, for instance: @example :- module(example,[a/1]). ... a(G) :- call(G) ... @end example The expected behavior for this procedure is to execute goal @var{G} within the current module, that is, within @code{example}. On the other hand, when executing @code{call/1} the system only knows where @code{call/1} was defined, that is, it only knows of @code{primitives}. A similar problem arises for @code{assert/1} and friends. The @code{meta_predicate/1} declaration informs the system that some arguments of a procedure are goals, clauses or clauses heads, and that these arguments must be expanded to receive the current source module: @table @code @item meta_predicate @var{G1},....,@var{Gn} @findex meta_predicate/1 (directive) @syindex meta_predicate/1 (directive) @cnindex meta_predicate/1 (directive) Each @var{Gi} is a mode specification. For example, a declaration for @code{call/1} and @code{setof/3} would be of the form: @example :- meta_predicate call(:), setof(?,:,?). @end example If the argument is @code{:} or an integer, the argument is a call and must be expanded. Otherwise, the argument should not be expanded. Note that the system already includes declarations for all built-ins. @end table In the previous example, the only argument to @code{call/1} must be expanded, resulting in the following code: @example :- module(example,[a/1]). ... a(G) :- call(example:G) ... @end example You can avoid goal expansion by using @code{module_transparent/1}. @table @code @item module_transparent +@var{Preds} @findex module_transparent/1 (directive) @syindex module_transparent/1 (directive) @cnindex module_transparent/1 (directive) @var{Preds} is a comma separated list of name/arity pairs (like @code{dynamic/1}). Each goal associated with a transparent declared predicate will inherit the context module from its parent goal. @end table @node Re-Exporting Modules, , Meta-Predicates in Modules, Modules @section Re-Exporting Predicates From Other Modules It is sometimes convenient to re-export predicates originally defined in a different module. This is often useful if you are adding to the functionality of a module, or if you are composing a large module with several small modules. The following declarations can be used for that purpose: @table @code @item reexport(+@var{F}) @findex reexport/1 @snindex reexport/1 @cnindex reexport/1 Export all predicates defined in file @var{F} as if they were defined in the current module. @item reexport(+@var{F},+@var{Decls}) @findex reexport/2 @snindex reexport/2 @cnindex reexport/2 Export predicates defined in file @var{F} according to @var{Decls}. The declarations may be of the form: @itemize @bullet @item A list of predicate declarations to be exported. Each declaration may be a predicate indicator or of the form ``@var{PI} @code{as} @var{NewName}'', meaning that the predicate with indicator @var{PI} is to be exported under name @var{NewName}. @item @code{except}(@var{List}) In this case, all predicates not in @var{List} are exported. Moreover, if ``@var{PI} @code{as} @var{NewName}'' is found, the predicate with indicator @var{PI} is to be exported under name @var{NewName}@ as before. @end itemize @end table Re-exporting predicates must be used with some care. Please, take into account the following observations: @itemize @bullet @item The @code{reexport} declarations must be the first declarations to follow the @code{module} declaration. @item It is possible to use both @code{reexport} and @code{use_module}, but all predicates reexported are automatically available for use in the current module. @item In order to obtain efficient execution, YAP compiles dependencies between re-exported predicates. In practice, this means that changing a @code{reexport} declaration and then @strong{just} recompiling the file may result in incorrect execution. @end itemize @node Built-ins, Library, Modules, Top @chapter Built-In Predicates @menu Built-ins, Debugging, Syntax, Top * Control:: Controlling the Execution of Prolog Programs * Undefined Procedures:: Handling calls to Undefined Procedures * Messages:: Message Handling in YAP * Testing Terms:: Predicates on Terms * Predicates on Atoms:: Manipulating Atoms * Predicates on Characters:: Manipulating Characters * Comparing Terms:: Comparison of Terms * Arithmetic:: Arithmetic in YAP * I/O:: Input/Output with YAP * Database:: Modifying Prolog's Database * Sets:: Finding All Possible Solutions * Grammars:: Grammar Rules * Preds:: Predicate Information * OS:: Access to Operating System Functionality * Term Modification:: Updating Prolog Terms * Global Variables:: Manipulating Global Variables * Profiling:: Profiling Prolog Execution * Call Counting:: Limiting the Maximum Number of Reductions * Arrays:: Supporting Global and Local Arrays * Preds:: Information on Predicates * Misc:: Miscellaneous Predicates @end menu @node Control, Undefined Procedures, , Top @section Control Predicates This chapter describes the predicates for controlling the execution of Prolog programs. In the description of the arguments of functors the following notation will be used: @itemize @bullet @item a preceding plus sign will denote an argument as an "input argument" - it cannot be a free variable at the time of the call; @item a preceding minus sign will denote an "output argument"; @item an argument with no preceding symbol can be used in both ways. @end itemize @table @code @item +@var{P}, +@var{Q} [ISO] @findex ,/2 @syindex ,/2 @cyindex ,/2 Conjunction of goals (and). @noindent Example: @example p(X) :- q(X), r(X). @end example @noindent should be read as "p(@var{X}) if q(@var{X}) and r(@var{X})". @item +@var{P} ; +@var{Q} [ISO] @findex ;/2 @syindex ;/2 @cyindex ;/2 Disjunction of goals (or). @noindent Example: @example p(X) :- q(X); r(X). @end example @noindent should be read as "p(@var{X}) if q(@var{X}) or r(@var{X})". @item true [ISO] @findex true/0 @syindex true/0 @cyindex true/0 Succeeds once. @item fail [ISO] @findex fail/0 @syindex fail/0 @cyindex fail/0 Fails always. @item false @findex false/0 @syindex false/0 @cnindex false/0 The same as fail @item ! [ISO] @findex !/0 @syindex !/0 @cyindex !/0 Read as "cut". Cuts any choices taken in the current procedure. When first found "cut" succeeds as a goal, but if backtracking should later return to it, the parent goal (the one which matches the head of the clause containing the "cut", causing the clause activation) will fail. This is an extra-logical predicate and cannot be explained in terms of the declarative semantics of Prolog. example: @example member(X,[X|_]). member(X,[_|L]) :- member(X,L). @end example @noindent With the above definition @example ?- member(X,[1,2,3]). @end example @noindent will return each element of the list by backtracking. With the following definition: @example member(X,[X|_]) :- !. member(X,[_|L]) :- member(X,L). @end example @noindent the same query would return only the first element of the list, since backtracking could not "pass through" the cut. @item \+ +@var{P} [ISO] @findex \+/1 @syindex \+/1 @cyindex \+/1 Goal @var{P} is not provable. The execution of this predicate fails if and only if the goal @var{P} finitely succeeds. It is not a true logical negation, which is impossible in standard Prolog, but "negation-by-failure". @noindent This predicate might be defined as: @example \+(P) :- P, !, fail. \+(_). @end example @noindent if @var{P} did not include "cuts". @item not +@var{P} @findex not/1 @snindex not/1 @cyindex not/1 Goal @var{P} is not provable. The same as @code{'\+ @var{P}'}. This predicate is kept for compatibility with C-Prolog and previous versions of YAP. Uses of @code{not/1} should be replace by @code{(\+)/1}, as YAP does not implement true negation. @item +@var{P} -> +@var{Q} [ISO] @findex ->/2 @syindex ->/2 @cnindex ->/2 Read as "if-then-else" or "commit". This operator is similar to the conditional operator of imperative languages and can be used alone or with an else part as follows: @table @code @item +P -> +Q "if P then Q". @item +P -> +Q; +R "if P then Q else R". @end table @noindent These two predicates could be defined respectively in Prolog as: @example (P -> Q) :- P, !, Q. @end example @noindent and @example (P -> Q; R) :- P, !, Q. (P -> Q; R) :- R. @end example @noindent if there were no "cuts" in @var{P}, @var{Q} and @var{R}. Note that the commit operator works by "cutting" any alternative solutions of @var{P}. Note also that you can use chains of commit operators like: @example P -> Q ; R -> S ; T. @end example @noindent Note that @code{(->)/2} does not affect the scope of cuts in its arguments. @item +@var{Conditon} *-> +@var{Action} ; +@var{Else} @findex ->*/2 @snindex ->*/2 @cnindex ->*/2 This construct implements the so-called @emph{soft-cut}. The control is defined as follows: If @var{Condition} succeeds at least once, the semantics is the same as (@var{Condition}, @var{Action}). If @var{Condition} does not succeed, the semantics is that of (\+ @var{Condition}, @var{Else}). In other words, If @var{Condition} succeeds at least once, simply behave as the conjunction of @var{Condition} and @var{Action}, otherwise execute @var{Else}. The construct @var{A *-> B}, i.e. without an @var{Else} branch, is translated as the normal conjunction @var{A}, @var{B}. @item repeat [ISO] @findex repeat/0 @syindex repeat/0 @cyindex repeat/0 Succeeds repeatedly. In the next example, @code{repeat} is used as an efficient way to implement a loop. The next example reads all terms in a file: @example a :- repeat, read(X), write(X), nl, X=end_of_file, !. @end example @noindent the loop is effectively terminated by the cut-goal, when the test-goal @code{X=end} succeeds. While the test fails, the goals @code{read(X)}, @code{write(X)}, and @code{nl} are executed repeatedly, because backtracking is caught by the @code{repeat} goal. The built-in @code{repeat/1} could be defined in Prolog by: @example repeat. repeat :- repeat. @end example @item call(+@var{P}) [ISO] @findex call/1 @syindex call/1 @cyindex call/1 If @var{P} is instantiated to an atom or a compound term, the goal @code{call(@var{P})} is executed as if the value of @code{P} was found instead of the call to @code{call/1}, except that any "cut" occurring in @var{P} only cuts alternatives in the execution of @var{P}. @item incore(+@var{P}) @findex incore/1 @syindex incore/1 @cnindex incore/1 The same as @code{call/1}. @item call_with_args(+@var{Name},...,?@var{Ai},...) @findex call_with_args/n @snindex call_with_args/n @cnindex call_with_args/n Meta-call where @var{Name} is the name of the procedure to be called and the @var{Ai} are the arguments. The number of arguments varies between 0 and 10. If @var{Name} is a complex term, then @code{call_with_args/n} behaves as @code{call/n}: @example call(p(X1,...,Xm), Y1,...,Yn) :- p(X1,...,Xm,Y1,...,Yn). @end example @item +@var{P} The same as @code{call(@var{P})}. This feature has been kept to provide compatibility with C-Prolog. When compiling a goal, YAP generates a @code{call(@var{X})} whenever a variable @var{X} is found as a goal. @example a(X) :- X. @end example @noindent is converted to: @example a(X) :- call(X). @end example @item if(?@var{G},?@var{H},?@var{I}) @findex if/3 @syindex if/3 @cnindex if/3 Call goal @var{H} once per each solution of goal @var{H}. If goal @var{H} has no solutions, call goal @var{I}. The built-in @code{if/3} is similar to @code{->/3}, with the difference that it will backtrack over the test goal. Consider the following small data-base: @example a(1). b(a). c(x). a(2). b(b). c(y). @end example Execution of an @code{if/3} query will proceed as follows: @example ?- if(a(X),b(Y),c(Z)). X = 1, Y = a ? ; X = 1, Y = b ? ; X = 2, Y = a ? ; X = 2, Y = b ? ; no @end example @noindent The system will backtrack over the two solutions for @code{a/1} and the two solutions for @code{b/1}, generating four solutions. Cuts are allowed inside the first goal @var{G}, but they will only prune over @var{G}. If you want @var{G} to be deterministic you should use if-then-else, as it is both more efficient and more portable. @item once(:@var{G}) [ISO] @findex once/1 @snindex once/1 @cnindex once/1 Execute the goal @var{G} only once. The predicate is defined by: @example once(G) :- call(G), !. @end example @noindent Note that cuts inside @code{once/1} can only cut the other goals inside @code{once/1}. @item forall(:@var{Cond},:@var{Action}) @findex forall/2 @snindex forall/2 @cnindex forall/2 For all alternative bindings of @var{Cond} @var{Action} can be proven. The example verifies that all arithmetic statements in the list @var{L} are correct. It does not say which is wrong if one proves wrong. @example ?- forall(member(Result = Formula, [2 = 1 + 1, 4 = 2 * 2]), Result =:= Formula). @end example @item ignore(:@var{Goal}) @findex ignore/1 @snindex ignore/1 @cnindex ignore/1 Calls @var{Goal} as @code{once/1}, but succeeds, regardless of whether @code{Goal} succeeded or not. Defined as: @example ignore(Goal) :- Goal, !. ignore(_). @end example @item abort @findex abort/0 @syindex abort/0 @cyindex abort/0 Abandons the execution of the current goal and returns to top level. All break levels (see @code{break/0} below) are terminated. It is mainly used during debugging or after a serious execution error, to return to the top-level. @item break @findex break/0 @syindex break/0 @cyindex break/0 Suspends the execution of the current goal and creates a new execution level similar to the top level, displaying the following message: @example [ Break (level ) ] @end example @noindent telling the depth of the break level just entered. To return to the previous level just type the end-of-file character or call the end_of_file predicate. This predicate is especially useful during debugging. @item halt [ISO] @findex halt/0 @syindex halt/0 @cyindex halt/0 Halts Prolog, and exits to the calling application. In YAP, @code{halt/0} returns the exit code @code{0}. @item halt(+ @var{I}) [ISO] @findex halt/1 @syindex halt/1 @cnindex halt/1 Halts Prolog, and exits to the calling application returning the code given by the integer @var{I}. @item catch(+@var{Goal},+@var{Exception},+@var{Action}) [ISO] @findex catch/3 @snindex catch/3 @cnindex catch/3 The goal @code{catch(@var{Goal},@var{Exception},@var{Action})} tries to execute goal @var{Goal}. If during its execution, @var{Goal} throws an exception @var{E'} and this exception unifies with @var{Exception}, the exception is considered to be caught and @var{Action} is executed. If the exception @var{E'} does not unify with @var{Exception}, control again throws the exception. The top-level of YAP maintains a default exception handler that is responsible to capture uncaught exceptions. @item throw(+@var{Ball}) [ISO] @findex throw/1 @snindex throw/1 @cnindex throw/1 The goal @code{throw(@var{Ball})} throws an exception. Execution is stopped, and the exception is sent to the ancestor goals until reaching a matching @code{catch/3}, or until reaching top-level. @item garbage_collect @findex garbage_collect/0 @syindex garbage_collect/0 @cnindex garbage_collect/0 The goal @code{garbage_collect} forces a garbage collection. @item garbage_collect_atoms @findex garbage_collect_atoms/0 @syindex garbage_collect_atoms/0 @cnindex garbage_collect_atoms/0 The goal @code{garbage_collect} forces a garbage collection of the atoms in the data-base. Currently, only atoms are recovered. @item gc @findex gc/0 @syindex gc/0 @cnindex gc/0 The goal @code{gc} enables garbage collection. The same as @code{yap_flag(gc,on)}. @item nogc @findex nogc/0 @syindex nogc/0 @cnindex nogc/0 The goal @code{nogc} disables garbage collection. The same as @code{yap_flag(gc,off)}. @item grow_heap(+@var{Size}) @snindex grow_heap/1 @cnindex grow_heap/1 Increase heap size @var{Size} kilobytes. @item grow_stack(+@var{Size}) @findex grow_stack/1 @snindex grow_stack/1 @cnindex grow_stack/1 Increase stack size @var{Size} kilobytes. @end table @node Undefined Procedures, Messages, Control, Top @section Handling Undefined Procedures A predicate in a module is said to be undefined if there are no clauses defining the predicate, and if the predicate has not been declared to be dynamic. What YAP does when trying to execute undefined predicates can be specified in three different ways: @itemize @bullet @item By setting an YAP flag, through the @code{yap_flag/2} or @code{set_prolog_flag/2} built-ins. This solution generalizes the ISO standard. @item By using the @code{unknown/2} built-in (this solution is compatible with previous releases of YAP). @item By defining clauses for the hook predicate @code{user:unknown_predicate_handler/3}. This solution is compatible with SICStus Prolog. @end itemize In more detail: @table @code @item unknown(-@var{O},+@var{N}) @findex unknown/2 @saindex unknown/2 @cnindex unknown/2 Specifies an handler to be called is a program tries to call an undefined static procedure @var{P}. The arity of @var{N} may be zero or one. If the arity is @code{0}, the new action must be one of @code{fail}, @code{warning}, or @code{error}. If the arity is @code{1}, @var{P} is an user-defined handler and at run-time, the argument to the handler @var{P} will be unified with the undefined goal. Note that @var{N} must be defined prior to calling @code{unknown/2}, and that the single argument to @var{N} must be unbound. In YAP, the default action is to @code{fail} (note that in the ISO Prolog standard the default action is @code{error}). After defining @code{undefined/1} by: @example undefined(A) :- format('Undefined predicate: ~w~n',[A]), fail. @end example @noindent and executing the goal: @example unknown(U,undefined(X)). @end example @noindent a call to a predicate for which no clauses were defined will result in the output of a message of the form: @example Undefined predicate: user:xyz(A1,A2) @end example @noindent followed by the failure of that call. @item yap_flag(unknown,+@var{SPEC}) Alternatively, one can use @code{yap_flag/2}, @code{current_prolog_flag/2}, or @code{set_prolog_flag/2}, to set this functionality. In this case, the first argument for the built-ins should be @code{unknown}, and the second argument should be either @code{error}, @code{warning}, @code{fail}, or a goal. @item user:unknown_predicate_handler(+G,+M,?NG) @findex unknown_predicate_handler/3 @syindex unknown_predicate_handler/3 @cnindex unknown_predicate_handler/3 The user may also define clauses for @code{user:unknown_predicate_handler/3} hook predicate. This user-defined procedure is called before any system processing for the undefined procedure, with the first argument @var{G} set to the current goal, and the second @var{M} set to the current module. The predicate @var{G} will be called from within the user module. If @code{user:unknown_predicate_handler/3} succeeds, the system will execute @var{NG}. If @code{user:unknown_predicate_handler/3} fails, the system will execute default action as specified by @code{unknown/2}. @end table @node Messages, Testing Terms, Undefined Procedures, Top @section Message Handling The interaction between YAP and the user relies on YAP's ability to portray messages. These messages range from prompts to error information. All message processing is performed through the builtin @code{print_message/2}, in two steps: @itemize @bullet @item The message is processed into a list of commands @item The commands in the list are sent to the @code{format/3} builtin in sequence. @end itemize The first argument to @code{print_message/2} specifies the importance of the message. The options are: @table @code @item error error handling @item warning compilation and run-time warnings, @item informational generic informational messages @item help help messages (not currently implemented in YAP) @item query query used in query processing (not currently implemented in YAP) @item silent messages that do not produce output but that can be intercepted by hooks. @end table The next table shows the main predicates and hooks associated to message handling in YAP: @table @code @item print_message(+@var{Kind}, @var{Term}) @findex print_message/2 @syindex print_message/2 @cnindex print_message/2 The predicate print_message/2 is used to print messages, notably from exceptions in a human-readable format. @var{Kind} is one of @code{informational}, @code{banner}, @code{warning}, @code{error}, @code{help} or @code{silent}. A human-readable message is printed to the stream @code{user_error}. @c \index{silent}\index{quiet}% If the Prolog flag @code{verbose} is @code{silent}, messages with @var{Kind} @code{informational}, or @code{banner} are treated as silent.@c See \cmdlineoption{-q}. This predicate first translates the @var{Term} into a list of `message lines' (see @code{print_message_lines/3} for details). Next it will call the hook @code{message_hook/3} to allow the user intercepting the message. If @code{message_hook/3} fails it will print the message unless @var{Kind} is silent. @c The print_message/2 predicate and its rules are in the file @c \file{/boot/messages.pl}, which may be inspected for more @c information on the error messages and related error terms. If you need to report errors from your own predicates, we advise you to stick to the existing error terms if you can; but should you need to invent new ones, you can define corresponding error messages by asserting clauses for @code{prolog:message/2}. You will need to declare the predicate as multifile. @c See also message_to_string/2. @item print_message_lines(+@var{Stream}, +@var{Prefix}, +@var{Lines}) @findex print_message_lines/3 @syindex print_message_lines/3 @cnindex print_message_lines/3 Print a message (see @code{print_message/2}) that has been translated to a list of message elements. The elements of this list are: @table @code @item @code{}-@code{} Where @var{Format} is an atom and @var{Args} is a list of format argument. Handed to @code{format/3}. @item @code{flush} If this appears as the last element, @var{Stream} is flushed (see @code{flush_output/1}) and no final newline is generated. @item @code{at_same_line} If this appears as first element, no prefix is printed for the first line and the line-position is not forced to 0 (see @code{format/1}, @code{~N}). @item @code{} Handed to @code{format/3} as @code{format(Stream, Format, [])}. @item nl A new line is started and if the message is not complete the @var{Prefix} is printed too. @end table @item user:message_hook(+@var{Term}, +@var{Kind}, +@var{Lines}) @findex message_hook/3 @syindex message_hook/3 @cnindex message_hook/3 Hook predicate that may be define in the module @code{user} to intercept messages from @code{print_message/2}. @var{Term} and @var{Kind} are the same as passed to @code{print_message/2}. @var{Lines} is a list of format statements as described with @code{print_message_lines/3}. This predicate should be defined dynamic and multifile to allow other modules defining clauses for it too. @end table @node Testing Terms, Predicates on Atoms, Messages, Top @section Predicates on terms @table @code @item var(@var{T}) [ISO] @findex var/1 @syindex var/1 @cyindex var/1 Succeeds if @var{T} is currently a free variable, otherwise fails. @item atom(@var{T}) [ISO] @findex atom/1 @syindex atom/1 @cyindex atom/1 Succeeds if and only if @var{T} is currently instantiated to an atom. @item atomic(T) [ISO] @findex atomic/1 @syindex atomic/1 @cyindex atomic/1 Checks whether @var{T} is an atomic symbol (atom or number). @item compound(@var{T}) [ISO] @findex compound/1 @syindex compound/1 @cnindex compound/1 Checks whether @var{T} is a compound term. @item db_reference(@var{T}) @findex db_reference/1C @syindex db_reference/1 @cyindex db_reference/1 Checks whether @var{T} is a database reference. @item float(@var{T}) [ISO] @findex float/1 @syindex float/1 @cnindex float/1 Checks whether @var{T} is a floating point number. @item integer(@var{T}) [ISO] @findex integer/1 @syindex integer/1 @cyindex integer/1 Succeeds if and only if @var{T} is currently instantiated to an integer. @item nonvar(@var{T}) [ISO] @findex nonvar/1 @syindex nonvar/1 @cyindex nonvar/1 The opposite of @code{var(@var{T})}. @item number(@var{T}) [ISO] @findex number/1 @syindex number/1 @cyindex number/1 Checks whether @code{T} is an integer or a float. @item primitive(@var{T}) @findex primitive/1 @syindex primitive/1 @cyindex primitive/1 Checks whether @var{T} is an atomic term or a database reference. @item simple(@var{T}) @findex simple/1 @syindex simple/1 @cnindex simple/1 Checks whether @var{T} is unbound, an atom, or a number. @item callable(@var{T}) @findex callable/1 @syindex callable/1 @cnindex callable/1 Checks whether @var{T} is a callable term, that is, an atom or a compound term. @item numbervars(@var{T},+@var{N1},-@var{Nn}) @findex numbervars/3 @syindex numbervars/3 @cnindex numbervars/3 Instantiates each variable in term @var{T} to a term of the form: @code{'$VAR'(@var{I})}, with @var{I} increasing from @var{N1} to @var{Nn}. @item ground(@var{T}) @findex ground/1 @syindex ground/1 @cnindex ground/1 Succeeds if there are no free variables in the term @var{T}. @item arg(+@var{N},+@var{T},@var{A}) [ISO] @findex arg/3 @syindex arg/3 @cnindex arg/3 Succeeds if the argument @var{N} of the term @var{T} unifies with @var{A}. The arguments are numbered from 1 to the arity of the term. The current version will generate an error if @var{T} or @var{N} are unbound, if @var{T} is not a compound term, of if @var{N} is not a positive integer. Note that previous versions of YAP would fail silently under these errors. @item functor(@var{T},@var{F},@var{N}) [ISO] @findex functor/3 @syindex functor/3 @cyindex functor/3 The top functor of term @var{T} is named @var{F} and has arity @var{N}. When @var{T} is not instantiated, @var{F} and @var{N} must be. If @var{N} is 0, @var{F} must be an atomic symbol, which will be unified with @var{T}. If @var{N} is not 0, then @var{F} must be an atom and @var{T} becomes instantiated to the most general term having functor @var{F} and arity @var{N}. If @var{T} is instantiated to a term then @var{F} and @var{N} are respectively unified with its top functor name and arity. In the current version of YAP the arity @var{N} must be an integer. Previous versions allowed evaluable expressions, as long as the expression would evaluate to an integer. This feature is not available in the ISO Prolog standard. @item @var{T} =.. @var{L} [ISO] @findex =../2 @syindex =../2 @cyindex =../2 The list @var{L} is built with the functor and arguments of the term @var{T}. If @var{T} is instantiated to a variable, then @var{L} must be instantiated either to a list whose head is an atom, or to a list consisting of just a number. @item @var{X} = @var{Y} [ISO] @findex =/2 @syindex =/2 @cnindex =/2 Tries to unify terms @var{X} and @var{Y}. @item @var{X} \= @var{Y} [ISO] @findex \=/2 @snindex \=/2 @cnindex \=/2 Succeeds if terms @var{X} and @var{Y} are not unifiable. @item unify_with_occurs_check(?T1,?T2) [ISO] @findex unify_with_occurs_check/2 @syindex unify_with_occurs_check/2 @cnindex unify_with_occurs_check/2 Obtain the most general unifier of terms @var{T1} and @var{T2}, if there is one. This predicate implements the full unification algorithm. An example:n @example unify_with_occurs_check(a(X,b,Z),a(X,A,f(B)). @end example @noindent will succeed with the bindings @code{A = b} and @code{Z = f(B)}. On the other hand: @example unify_with_occurs_check(a(X,b,Z),a(X,A,f(Z)). @end example @noindent would fail, because @code{Z} is not unifiable with @code{f(Z)}. Note that @code{(=)/2} would succeed for the previous examples, giving the following bindings @code{A = b} and @code{Z = f(Z)}. @item copy_term(?@var{TI},-@var{TF}) [ISO] @findex copy_term/2 @syindex copy_term/2 @cnindex copy_term/2 Term @var{TF} is a variant of the original term @var{TI}, such that for each variable @var{V} in the term @var{TI} there is a new variable @var{V'} in term @var{TF}. Notice that: @itemize @bullet @item suspended goals and attributes for attributed variables in @var{TI} are also duplicated; @item ground terms are shared between the new and the old term. @end itemize If you do not want any sharing to occur please use @code{duplicate_term/2}. @item duplicate_term(?@var{TI},-@var{TF}) [ISO] @findex duplicate_term/2 @syindex duplicate_term/2 @cnindex duplicate_term/2 Term @var{TF} is a variant of the original term @var{TI}, such that for each variable @var{V} in the term @var{TI} there is a new variable @var{V'} in term @var{TF}, and the two terms do not share any structure. All suspended goals and attributes for attributed variables in @var{TI} are also duplicated. Also refer to @code{copy_term/2}. @end table @node Predicates on Atoms, Predicates on Characters, Testing Terms, Top @section Predicates on Atoms The following predicates are used to manipulate atoms: @table @code @item name(@var{A},@var{L}) @findex name/2 @syindex name/2 @cyindex name/2 The predicate holds when at least one of the arguments is ground (otherwise, an error message will be displayed). The argument @var{A} will be unified with an atomic symbol and @var{L} with the list of the ASCII codes for the characters of the external representation of @var{A}. @example name(yap,L). @end example @noindent will return: @example L = [121,97,112]. @end example @noindent and @example name(3,L). @end example @noindent will return: @example L = [51]. @end example @item atom_chars(?@var{A},?@var{L}) [ISO] @findex atom_chars/2 @saindex atom_chars/2 @cnindex atom_chars/2 The predicate holds when at least one of the arguments is ground (otherwise, an error message will be displayed). The argument @var{A} must be unifiable with an atom, and the argument @var{L} with the list of the ASCII codes for the characters of the external representation of @var{A}. The ISO-Prolog standard dictates that @code{atom_chars/2} should unify the second argument with a list of one-char atoms, and not the character codes. For compatibility with previous versions of YAP, and with other Prolog implementations, YAP unifies the second argument with the character codes, as in @code{atom_codes/2}. Use the @code{set_prolog_flag(to_chars_mode,iso)} to obtain ISO standard compatibility. @item atom_codes(?@var{A},?@var{L}) [ISO] @findex atom_codes/2 @syindex atom_codes/2 @cnindex atom_codes/2 The predicate holds when at least one of the arguments is ground (otherwise, an error message will be displayed). The argument @var{A} will be unified with an atom and @var{L} with the list of the ASCII codes for the characters of the external representation of @var{A}. @item atom_concat(+@var{As},?@var{A}) @findex atom_concat/2 @syindex atom_concat/2 @cnindex atom_concat/2 The predicate holds when the first argument is a list of atoms, and the second unifies with the atom obtained by concatenating all the atoms in the first list. @item atomic_concat(+@var{As},?@var{A}) @findex atomic_concat/2 @snindex atomic_concat/2 @cnindex atomic_concat/2 The predicate holds when the first argument is a list of atoms, and the second unifies with the atom obtained by concatenating all the atomic terms in the first list. The first argument thus may contain atoms or numbers. @item atom_length(+@var{A},?@var{I}) [ISO] @findex atom_length/2 @snindex atom_length/2 @cnindex atom_length/2 The predicate holds when the first argument is an atom, and the second unifies with the number of characters forming that atom. @item atom_concat(?@var{A1},?@var{A2},?@var{A12}) [ISO] @findex atom_concat/3 @snindex atom_concat/3 @cnindex atom_concat/3 The predicate holds when the third argument unifies with an atom, and the first and second unify with atoms such that their representations concatenated are the representation for @var{A12}. If @var{A1} and @var{A2} are unbound, the built-in will find all the atoms that concatenated give @var{A12}. @item number_chars(?@var{I},?@var{L}) @findex number_chars/2 @saindex number_chars/2 @cnindex number_chars/2 The predicate holds when at least one of the arguments is ground (otherwise, an error message will be displayed). The argument @var{I} must be unifiable with a number, and the argument @var{L} with the list of the ASCII codes for the characters of the external representation of @var{I}. The ISO-Prolog standard dictates that @code{number_chars/2} should unify the second argument with a list of one-char atoms, and not the character codes. For compatibility with previous versions of YAP, and with other Prolog implementations, YAP unifies the second argument with the character codes, as in @code{number_codes/2}. Use the @code{set_prolog_flag(to_chars_mode,iso)} to obtain ISO standard compatibility. @item number_codes(?@var{A},?@var{L}) [ISO] @findex number_codes/2 @syindex number_codes/2 @cnindex number_codes/2 The predicate holds when at least one of the arguments is ground (otherwise, an error message will be displayed). The argument @var{A} will be unified with a number and @var{L} with the list of the ASCII codes for the characters of the external representation of @var{A}. @item atom_number(?@var{Atom},?@var{Number}) @findex atom_number/2 @syindex atom_number/2 @cnindex atom_number/2 The predicate holds when at least one of the arguments is ground (otherwise, an error message will be displayed). If the argument @var{Atom} is an atom, @var{Number} must be the number corresponding to the characters in @var{Atom}, otherwise the characters in @var{Atom} must encode a number @var{Number}. @item number_atom(?@var{I},?@var{L}) @findex number_atom/2 @snindex number_atom/2 @cnindex number_atom/2 The predicate holds when at least one of the arguments is ground (otherwise, an error message will be displayed). The argument @var{I} must be unifiable with a number, and the argument @var{L} must be unifiable with an atom representing the number. @item sub_atom(+@var{A},?@var{Bef}, ?@var{Size}, ?@var{After}, ?@var{At_out}) [ISO] @findex sub_atom/5 @snindex sub_atom/5 @cnindex sub_atom/5 True when @var{A} and @var{At_out} are atoms such that the name of @var{At_out} has size @var{Size} and is a sub-string of the name of @var{A}, such that @var{Bef} is the number of characters before and @var{After} the number of characters afterwards. Note that @var{A} must always be known, but @var{At_out} can be unbound when calling this built-in. If all the arguments for @code{sub_atom/5} but @var{A} are unbound, the built-in will backtrack through all possible sub-strings of @var{A}. @end table @node Predicates on Characters, Comparing Terms, Predicates on Atoms, Top @section Predicates on Characters The following predicates are used to manipulate characters: @table @code @item char_code(?@var{A},?@var{I}) [ISO] @findex char_code/2 @syindex char_code/2 @cnindex char_code/2 The built-in succeeds with @var{A} bound to character represented as an atom, and @var{I} bound to the character code represented as an integer. At least, one of either @var{A} or @var{I} must be bound before the call. @item char_type(?@var{Char}, ?@var{Type}) @findex char_type/2 @snindex char_type/2 @cnindex char_type/2 Tests or generates alternative @var{Types} or @var{Chars}. The character-types are inspired by the standard @code{C} @code{} primitives. @table @code @item alnum @var{Char} is a letter (upper- or lowercase) or digit. @item alpha @var{Char} is a letter (upper- or lowercase). @item csym @var{Char} is a letter (upper- or lowercase), digit or the underscore (_). These are valid C- and Prolog symbol characters. @item csymf @var{Char} is a letter (upper- or lowercase) or the underscore (_). These are valid first characters for C- and Prolog symbols @item ascii @var{Char} is a 7-bits ASCII character (0..127). @item white @var{Char} is a space or tab. E.i. white space inside a line. @item cntrl @var{Char} is an ASCII control-character (0..31). @item digit @var{Char} is a digit. @item digit(@var{Weigth}) @var{Char} is a digit with value @var{Weigth}. I.e. @code{char_type(X, digit(6))} yields @code{X = '6'}. Useful for parsing numbers. @item xdigit(@var{Weigth}) @var{Char} is a haxe-decimal digit with value @var{Weigth}. I.e. char_type(a, xdigit(X) yields X = '10'. Useful for parsing numbers. @item graph @var{Char} produces a visible mark on a page when printed. Note that the space is not included! @item lower @var{Char} is a lower-case letter. @item lower(Upper) @var{Char} is a lower-case version of @var{Upper}. Only true if @var{Char} is lowercase and @var{Upper} uppercase. @item to_lower(Upper) @var{Char} is a lower-case version of Upper. For non-letters, or letter without case, @var{Char} and Lower are the same. See also upcase_atom/2 and downcase_atom/2. @item upper @var{Char} is an upper-case letter. @item upper(Lower) @var{Char} is an upper-case version of Lower. Only true if @var{Char} is uppercase and Lower lowercase. @item to_upper(Lower) @var{Char} is an upper-case version of Lower. For non-letters, or letter without case, @var{Char} and Lower are the same. See also upcase_atom/2 and downcase_atom/2. @item punct @var{Char} is a punctuation character. This is a graph character that is not a letter or digit. @item space @var{Char} is some form of layout character (tab, vertical-tab, newline, etc.). @item end_of_file @var{Char} is -1. @item end_of_line @var{Char} ends a line (ASCII: 10..13). @item newline @var{Char} is a the newline character (10). @item period @var{Char} counts as the end of a sentence (.,!,?). @item quote @var{Char} is a quote-character (", ', `). @item paren(Close) @var{Char} is an open-parenthesis and Close is the corresponding close-parenthesis. @end table @item code_type(?@var{Code}, ?@var{Type}) @findex code_type/2 @snindex code_type/2 @cnindex code_type/2 As @code{char_type/2}, but uses character-codes rather than one-character atoms. Please note that both predicates are as flexible as possible. They handle either representation if the argument is instantiated and only will instantiate with an integer code or one-character atom depending of the version used. See also the prolog-flag @code{double_quotes} and the built-in predicates @code{atom_chars/2} and @code{atom_codes/2}. @end table @node Comparing Terms, Arithmetic, Predicates on Characters, Top @section Comparing Terms The following predicates are used to compare and order terms, using the standard ordering: @itemize @bullet @item variables come before numbers, numbers come before atoms which in turn come before compound terms, i.e.: variables @@< numbers @@< atoms @@< compound terms. @item variables are roughly ordered by "age" (the "oldest" variable is put first); @item floating point numbers are sorted in increasing order; @item Integers are sorted in increasing order; @item atoms are sorted in lexicographic order; @item compound terms are ordered first by arity of the main functor, then by the name of the main functor, and finally by their arguments in left-to-right order. @end itemize @table @code @item compare(@var{C},@var{X},@var{Y}) @findex compare/3 @syindex compare/3 @cyindex compare/3 As a result of comparing @var{X} and @var{Y}, @var{C} may take one of the following values: @itemize @bullet @item @code{=} if @var{X} and @var{Y} are identical; @item @code{<} if @var{X} precedes @var{Y} in the defined order; @item @code{>} if @var{Y} precedes @var{X} in the defined order; @end itemize @item @var{X} == @var{Y} [ISO] @findex ==/2 @syindex ==/2 @cyindex ==/2 Succeeds if terms @var{X} and @var{Y} are strictly identical. The difference between this predicate and @code{=/2} is that, if one of the arguments is a free variable, it only succeeds when they have already been unified. @example ?- X == Y. @end example @noindent fails, but, @example ?- X = Y, X == Y. @end example @noindent succeeds. @example ?- X == 2. @end example @noindent fails, but, @example ?- X = 2, X == 2. @end example @noindent succeeds. @item @var{X} \== @var{Y} [ISO] @findex \==/2 @syindex \==/2 @cyindex \==/2 Terms @var{X} and @var{Y} are not strictly identical. @item @var{X} @@< @var{Y} [ISO] @findex @@ @var{Y} [ISO] @findex @@>/2 @syindex @@>/2 @cyindex @@>/2 Term @var{X} follows term @var{Y} in the standard order. @item @var{X} @@>= @var{Y} [ISO] @findex @@>=/2 @syindex @@>=/2 @cyindex @@>=/2 Term @var{X} does not precede term @var{Y} in the standard order. @item sort(+@var{L},-@var{S}) @findex sort/2 @syindex sort/2 @cyindex sort/2 Unifies @var{S} with the list obtained by sorting @var{L} and merging identical (in the sense of @code{==}) elements. @item keysort(+@var{L},@var{S}) @findex keysort/2 @syindex keysort/2 @cyindex keysort/2 Assuming L is a list of the form @code{@var{Key}-@var{Value}}, @code{keysort(+@var{L},@var{S})} unifies @var{S} with the list obtained from @var{L}, by sorting its elements according to the value of @var{Key}. @example ?- keysort([3-a,1-b,2-c,1-a,1-b],S). @end example @noindent would return: @example S = [1-b,1-a,1-b,2-c,3-a] @end example @item length(?@var{L},?@var{S}) @findex length/2 @syindex length/2 @cyindex length/2 Unify the well-defined list @var{L} with its length. The procedure can be used to find the length of a pre-defined list, or to build a list of length @var{S}. @end table @node Arithmetic, I/O, Comparing Terms, Top @section Arithmetic Arithmetic expressions in YAP may use the following operators or @i{evaluable predicates}: @table @code @item +@var{X} The value of @var{X} itself. @item -@var{X} [ISO] Symmetric value. @item @var{X}+@var{Y} [ISO] Sum. @item @var{X}-@var{Y} [ISO] Difference. @item @var{X}*@var{Y} [ISO] Product. @item @var{X}/@var{Y} [ISO] Quotient. @item @var{X}//@var{Y} [ISO] Integer quotient. @item @var{X} mod @var{Y} [ISO] Integer remainder. @item @var{X} rem @var{Y} Integer remainder, the same as @code{mod}. @item exp(@var{X}) [ISO] Natural exponential. @item log(@var{X}) [ISO] Natural logarithm. @item log10(@var{X}) Decimal logarithm. @item sqrt(@var{X}) [ISO] Square root. @item sin(@var{X}) [ISO] Sine. @item cos(@var{X}) [ISO] Cosine. @item tan(@var{X}) Tangent. @item asin(@var{X}) Arc sine. @item acos(@var{X}) Arc cosine. @item atan(@var{X}) [ISO] Arc tangent. @item atan2(@var{X}) Four-quadrant arc tangent. @item sinh(@var{X}) Hyperbolic sine. @item cosh(@var{X}) Hyperbolic cosine. @item tanh(@var{X}) Hyperbolic tangent. @item asinh(@var{X}) Hyperbolic arc sine. @item acosh(@var{X}) Hyperbolic arc cosine. @item atanh(@var{X}) Hyperbolic arc tangent. @item integer(@var{X}) If @var{X} evaluates to a float, the integer between the value of @var{X} and 0 closest to the value of @var{X}, else if @var{X} evaluates to an integer, the value of @var{X}. @item float(@var{X}) [ISO] If @var{X} evaluates to an integer, the corresponding float, else the float itself. @item float_fractional_part(@var{X}) [ISO] The fractional part of the floating point number @var{X}, or @code{0.0} if @var{X} is an integer. In the @code{iso} language mode, @var{X} must be an integer. @item float_integer_part(@var{X}) [ISO] The float giving the integer part of the floating point number @var{X}, or @var{X} if @var{X} is an integer. In the @code{iso} language mode, @var{X} must be an integer. @item abs(@var{X}) [ISO] The absolute value of @var{X}. @item ceiling(@var{X}) [ISO] The float that is the smallest integral value not smaller than @var{X}. In @code{iso} language mode the argument must be a floating point-number and the result is an integer. @item floor(@var{X}) [ISO] The float that is the greatest integral value not greater than @var{X}. In @code{iso} language mode the argument must be a floating point-number and the result is an integer. @item round(@var{X}) [ISO] The nearest integral value to @var{X}. If @var{X} is equidistant to two integers, it will be rounded to the closest even integral value. In @code{iso} language mode the argument must be a floating point-number, the result is an integer and it the float is equidistant it is rounded up, that is, to the least integer greater than @var{X}. @item sign(@var{X}) [ISO] Return 1 if the @var{X} evaluates to a positive integer, 0 it if evaluates to 0, and -1 if it evaluates to a negative integer. If @var{X} evaluates to a floating-point number return 1.0 for a positive @var{X}, 0.0 for 0.0, and -1.0 otherwise. @item truncate(@var{X}) The float that is the integral value between @var{X} and 0 closest to @var{X}. @item max(@var{X},@var{Y}) The greater value of @var{X} and @var{Y}. @item min(@var{X},@var{Y}) The lesser value of @var{X} and @var{Y}. @item @var{X} ^ @var{Y} @var{X} raised to the power of @var{Y}, (from the C-Prolog syntax). @item exp(@var{X},@var{Y}) @var{X} raised to the power of @var{Y}, (from the Quintus Prolog syntax). @item @var{X} ** @var{Y} [ISO] @var{X} raised to the power of @var{Y} (from ISO). @item @var{X} /\ @var{Y} [ISO] Integer bitwise conjunction. @item @var{X} \/ @var{Y} [ISO] Integer bitwise disjunction. @item @var{X} # @var{Y} [ISO] Integer bitwise exclusive disjunction. @item @var{X} << @var{Y} Integer bitwise left logical shift of @var{X} by @var{Y} places. @item @var{X} >> @var{Y} [ISO] Integer bitwise right logical shift of @var{X} by @var{Y} places. @item \ @var{X} [ISO] Integer bitwise negation. @item gcd(@var{X},@var{Y}) The greatest common divisor of the two integers @var{X} and @var{Y}. @item msb(@var{X}) The most significant bit of the integer @var{X}. @item [@var{X}] Evaluates to @var{X} for expression @var{X}. Useful because character strings in Prolog are lists of character codes. @example X is Y*10+C-"0" @end example @noindent is the same as @example X is Y*10+C-[48]. @end example @noindent which would be evaluated as: @example X is Y*10+C-48. @end example @end table Besides numbers and the arithmetic operators described above, certain atoms have a special meaning when present in arithmetic expressions: @table @code @item pi The value of @emph{pi}, the ratio of a circle's circumference to its diameter. @item e The base of the natural logarithms. @item inf Infinity according to the IEEE Floating-Point standard. Note that evaluating this term will generate a domain error in the @code{iso} language mode. @item nan Not-a-number according to the IEEE Floating-Point standard. Note that evaluating this term will generate a domain error in the @code{iso} language mode. @item cputime CPU time in seconds, since YAP was invoked. @item heapused Heap space used, in bytes. @item local Local stack in use, in bytes. @item global Global stack in use, in bytes. @item random A "random" floating point number between 0 and 1. @end table The primitive YAP predicates involving arithmetic expressions are: @table @code @item @var{X} is +@var{Y} [2] @findex is/2 @syindex is/2 @caindex is/2 This predicate succeeds iff the result of evaluating the expression @var{Y} unifies with @var{X}. This is the predicate normally used to perform evaluation of arithmetic expressions: @example X is 2+3*4 @end example @noindent succeeds with @code{X = 14}. @item +@var{X} < +@var{Y} [ISO] @findex +@var{Y} [ISO] @findex >/2 @syindex >/2 @cyindex >/2 The value of the expression @var{X} is greater than the value of expression @var{Y}. @item +@var{X} >= +@var{Y} [ISO] @findex >=/2 @syindex >=/2 @cyindex >=/2 The value of the expression @var{X} is greater than or equal to the value of expression @var{Y}. @item +@var{X} =:= +@var{Y} [ISO] @findex =:=/2 @syindex =:=/2 @cyindex =:=/2 The value of the expression @var{X} is equal to the value of expression @var{Y}. @item +@var{X} =\= +@var{Y} [ISO] @findex =\=/2 @syindex =\=/2 @cyindex =\=/2 The value of the expression @var{X} is different from the value of expression @var{Y}. @item srandom(+@var{X}) @findex srandom/1 @snindex srandom/1 @cnindex srandom/1 Use the argument @var{X} as a new seed for YAP's random number generator. The argument should be an integer, but floats are acceptable. @end table @noindent @strong{Notes:} @itemize @bullet @item In contrast to previous versions of YAP, YAP4 @emph{does not} convert automatically between integers and floats. @item arguments to trigonometric functions are expressed in radians. @item if a (non-instantiated) variable occurs in an arithmetic expression YAP will generate an exception. If no error handler is available, execution will be thrown back to the top-level. @end itemize @node I/O, Database, Arithmetic, Top @section I/O Predicates Some of the I/O predicates described below will in certain conditions provide error messages and abort only if the file_errors flag is set. If this flag is cleared the same predicates will just fail. Details on setting and clearing this flag are given under 7.7. @menu Subnodes of Input/Output * Streams and Files:: Handling Streams and Files * C-Prolog File Handling:: C-Prolog Compatible File Handling * I/O of Terms:: Input/Output of terms * I/O of Characters:: Input/Output of Characters * I/O for Streams:: Input/Output using Streams * C-Prolog to Terminal:: C-Prolog compatible Character I/O to terminal * I/O Control:: Controlling your Input/Output * Sockets:: Using Sockets from YAP @end menu @node Streams and Files, C-Prolog File Handling, , I/O @subsection Handling Streams and Files @table @code @item open(+@var{F},+@var{M},-@var{S}) [ISO] @findex open/3 @syindex open/3 @cnindex open/3 Opens the file with name @var{F} in mode @var{M} ('read', 'write' or 'append'), returning @var{S} unified with the stream name. At most, there are 17 streams opened at the same time. Each stream is either an input or an output stream but not both. There are always 3 open streams: @code{user_input} for reading, @code{user_output} for writing and @code{user_error} for writing. If there is no ambiguity, the atoms @code{user_input} and @code{user_output} may be referred to as @code{user}. The @code{file_errors} flag controls whether errors are reported when in mode 'read' or 'append' the file @var{F} does not exist or is not readable, and whether in mode 'write' or 'append' the file is not writable. @item open(+@var{F},+@var{M},-@var{S},+@var{Opts}) [ISO] @findex open/4 @saindex open/4 @cnindex open/4 Opens the file with name @var{F} in mode @var{M} ('read', 'write' or 'append'), returning @var{S} unified with the stream name, and following these options: @table @code @item type(+@var{T}) Specify whether the stream is a @code{text} stream (default), or a @code{binary} stream. @item reposition(+@var{Bool}) Specify whether it is possible to reposition the stream (@code{true}), or not (@code{false}). By default, YAP enables repositioning for all files, except terminal files and sockets. @item eof_action(+@var{Action}) Specify the action to take if attempting to input characters from a stream where we have previously found an @code{end_of_file}. The possible actions are @code{error}, that raises an error, @code{reset}, that tries to reset the stream and is used for @code{tty} type files, and @code{eof_code}, which generates a new @code{end_of_file} (default for non-tty files). @item alias(+@var{Name}) Specify an alias to the stream. The alias @t{Name} must be an atom. The alias can be used instead of the stream descriptor for every operation concerning the stream. The operation will fail and give an error if the alias name is already in use. YAP allows several aliases for the same file, but only one is returned by @code{stream_property/2} @item bom(+@var{Bool}) If present and @code{true}, a BOM (@emph{Byte Order Mark}) was detected while opening the file for reading or a BOM was written while opening the stream. See @ref{BOM} for details. @item encoding(+@var{Encoding}) Set the encoding used for text. See @ref{Encoding} for an overview of wide character and encoding issues. @item representation_errors(+@var{Mode}) Change the behaviour when writing characters to the stream that cannot be represented by the encoding. The behaviour is one of @code{error} (throw and I/O error exception), @code{prolog} (write @code{\u...\} escape code or @code{xml} (write @code{&#...;} XML character entity). The initial mode is @code{prolog} for the user streams and @code{error} for all other streams. See also @ref{Encoding}. @item expand_filename(+@var{Mode}) If @var{Mode} is @code{true} then do filename expansion, then ask Prolog to do file name expansion before actually trying to opening the file: this includes processing @code{~} characters and processing @code{$} environment variables at the beginning of the file. Otherwise, just try to open the file using the given name. The default behavior is given by the Prolog flag @code{open_expands_filename}. @end table @item close(+@var{S}) [ISO] @findex close/1 @syindex close/1 @cyindex close/1 Closes the stream @var{S}. If @var{S} does not stand for a stream currently opened an error is reported. The streams @code{user_input}, @code{user_output}, and @code{user_error} can never be closed. @c By default, give a file name, @code{close/1} will also try to close a @c corresponding open stream. This feature is not available in ISO or @c SICStus languages mode and is deprecated. @item close(+@var{S},+@var{O}) [ISO] @findex close/2 @saindex close/2 @cnindex close/2 Closes the stream @var{S}, following options @var{O}. The only valid options are @code{force(true)} and @code{force(false)}. YAP currently ignores these options. @item time_file(+@var{File},-@var{Time}) @findex time_file/2 @snindex time_file/2 @cnindex time_file/2 Unify the last modification time of @var{File} with @var{Time}. @var{Time} is a floating point number expressing the seconds elapsed since Jan 1, 1970. @item absolute_file_name(+@var{Name},+@var{Options}, -@var{FullPath}) @item absolute_file_name(+@var{Name}, -@var{FullPath},+@var{Options}) @findex absolute_file_name/3 @syindex absolute_file_name/3 @cnindex absolute_file_name/3 Converts the given file specification into an absolute path. @var{Option} is a list of options to guide the conversion: @table @code @item extensions(+@var{ListOfExtensions}) List of file-extensions to try. Default is @samp{''}. For each extension, @code{absolute_file_name/3} will first add the extension and then verify the conditions imposed by the other options. If the condition fails, the next extension of the list is tried. Extensions may be specified both as @code{.ext} or plain @code{ext}. @item relative_to(+@var{FileOrDir}) Resolve the path relative to the given directory or directory the holding the given file. Without this option, paths are resolved relative to the working directory (see @code{working_directory/2}) or, if @var{Spec} is atomic and @code{absolute_file_name/[2,3]} is executed in a directive, it uses the current source-file as reference. @item access(+@var{Mode}) Imposes the condition access_file(@var{File}, @var{Mode}). @var{Mode} is on of @code{read}, @code{write}, @code{append}, @code{exist} or @code{none}. See also @code{access_file/2}. @item file_type(+@var{Type}) Defines extensions. Current mapping: @code{txt} implies @code{['']}, @code{prolog} implies @code{['.pl', '']}, @code{executable} implies @code{['.so', '']}, @code{qlf} implies @code{['.qlf', '']} and @code{directory} implies @code{['']}. The file-type @code{source} is an alias for @code{prolog} for compatibility to SICStus Prolog. See also @code{prolog_file_type/2}. @item file_errors(@code{fail}/@code{error}) If @code{error} (default), throw and @code{existence_error} exception if the file cannot be found. If @code{fail}, stay silent. @item solutions(@code{first}/@code{all}) If @code{first} (default), the predicates leaves no choice-point. Otherwise a choice-point will be left and backtracking may yield more solutions. @c @item expand(@code{true}/@code{false}) @c If @code{true} (default is @code{false}) and @var{Spec} is atomic, @c call @code{expand_file_name/2} followed by @code{member/2} on @var{Spec} before @c proceeding. This is a SWI-Prolog extension. @end table @c The Prolog flag @code{verbose_file_search} can be set to @code{true} @c to help debugging Prolog's search for files. Compatibility considerations to common argument-order in ISO as well as SICStus @code{absolute_file_name/3} forced us to be flexible here. If the last argument is a list and the 2nd not, the arguments are swapped, making the call @code{absolute_file_name}(+@var{Spec}, -@var{Path}, +@var{Options}) valid as well. @item absolute_file_name(+@var{Name},-@var{FullPath}) @findex absolute_file_name/2 @syindex absolute_file_name/2 @cnindex absolute_file_name/2 Give the path a full path @var{FullPath} YAP would use to consult a file named @var{Name}. Unify @var{FullPath} with @code{user} if the file name is @code{user}. @item file_base_name(+@var{Name},-@var{FileName}) @findex file_base_name/2 @snindex file_base_name/2 @cnindex file_base_name/2 Give the path a full path @var{FullPath} extract the @var{FileName}. @item current_stream(@var{F},@var{M},@var{S}) @findex current_stream/3 @syindex current_stream/3 @cnindex current_stream/3 Defines the relation: The stream @var{S} is opened on the file @var{F} in mode @var{M}. It might be used to obtain all open streams (by backtracking) or to access the stream for a file @var{F} in mode @var{M}, or to find properties for a stream @var{S}. @item is_stream(@var{S}) @findex is_stream/1 @snindex is_stream/1 @cnindex is_stream/1 Succeeds if @var{S} is a currently open stream. @item flush_output [ISO] @findex flush_output/0 @syindex flush_output/0 @cnindex flush_output/0 Send all data in the output buffer to current output stream. @item flush_output(+@var{S}) [ISO] @findex flush_output/1 @syindex flush_output/1 @cnindex flush_output/1 Send all data in the output buffer to stream @var{S}. @item set_input(+@var{S}) @findex set_input/1 @syindex set_input/1 @cnindex set_input/1 Set stream @var{S} as the current input stream. Predicates like @code{read/1} and @code{get/1} will start using stream @var{S}. @item set_output(+@var{S}) @findex set_output/1 @syindex set_output/1 @cnindex set_output/1 Set stream @var{S} as the current output stream. Predicates like @code{write/1} and @code{put/1} will start using stream @var{S}. @item stream_select(+@var{STREAMS},+@var{TIMEOUT},-@var{READSTREAMS}) @findex stream_select/3 @syindex stream_select/3 @cnindex stream_select/3 Given a list of open @var{STREAMS} opened in read mode and a @var{TIMEOUT} return a list of streams who are now available for reading. If the @var{TIMEOUT} is instantiated to @code{off}, @code{stream_select/3} will wait indefinitely for a stream to become open. Otherwise the timeout must be of the form @code{SECS:USECS} where @code{SECS} is an integer gives the number of seconds to wait for a timeout and @code{USECS} adds the number of micro-seconds. This built-in is only defined if the system call @code{select} is available in the system. @item current_input(-@var{S}) [ISO] @findex current_input/1 @syindex current_input/1 @cnindex current_input/1 Unify @var{S} with the current input stream. @item current_output(-@var{S}) [ISO] @findex current_output/1 @syindex current_output/1 @cnindex current_output/1 Unify @var{S} with the current output stream. @item at_end_of_stream [ISO] @findex at_end_of_stream/0 @syindex at_end_of_stream/0 @cnindex at_end_of_stream/0 Succeed if the current stream has stream position end-of-stream or past-end-of-stream. @item at_end_of_stream(+@var{S}) [ISO] @findex at_end_of_stream/1 @syindex at_end_of_stream/1 @cnindex at_end_of_stream/1 Succeed if the stream @var{S} has stream position end-of-stream or past-end-of-stream. Note that @var{S} must be a readable stream. @item set_stream_position(+@var{S}, +@var{POS}) [ISO] @findex set_stream_position/2 @syindex set_stream_position/2 @cnindex set_stream_position/2 Given a stream position @var{POS} for a stream @var{S}, set the current stream position for @var{S} to be @var{POS}. @item stream_property(?@var{Stream},?@var{Prop}) [ISO] @findex stream_property/2 @snindex stream_property/2 @cnindex stream_property/2 Obtain the properties for the open streams. If the first argument is unbound, the procedure will backtrack through all open streams. Otherwise, the first argument must be a stream term (you may use @code{current_stream} to obtain a current stream given a file name). The following properties are recognized: @table @code @item file_name(@var{P}) An atom giving the file name for the current stream. The file names are @code{user_input}, @code{user_output}, and @code{user_error} for the standard streams. @item mode(@var{P}) The mode used to open the file. It may be one of @code{append}, @code{read}, or @code{write}. @item input The stream is readable. @item output The stream is writable. @item alias(@var{A}) ISO-Prolog primitive for stream aliases. @t{YAP} returns one of the existing aliases for the stream. @item position(@var{P}) A term describing the position in the stream. @item end_of_stream(@var{E}) Whether the stream is @code{at} the end of stream, or it has found the end of stream and is @code{past}, or whether it has @code{not} yet reached the end of stream. @item eof_action(@var{A}) The action to take when trying to read after reaching the end of stream. The action may be one of @code{error}, generate an error, @code{eof_code}, return character code @code{-1}, or @code{reset} the stream. @item reposition(@var{B}) Whether the stream can be repositioned or not, that is, whether it is seekable. @item type(@var{T}) Whether the stream is a @code{text} stream or a @code{binary} stream. @item bom(+@var{Bool}) If present and @code{true}, a BOM (@emph{Byte Order Mark}) was detected while opening the file for reading or a BOM was written while opening the stream. See @ref{BOM} for details. @item encoding(+@var{Encoding}) Query the encoding used for text. See @ref{Encoding} for an overview of wide character and encoding issues in YAP. @item representation_errors(+@var{Mode}) Behaviour when writing characters to the stream that cannot be represented by the encoding. The behaviour is one of @code{error} (throw and I/O error exception), @code{prolog} (write @code{\u...\} escape code or @code{xml} (write @code{&#...;} XML character entity). The initial mode is @code{prolog} for the user streams and @code{error} for all other streams. See also @ref{Encoding} and @code{open/4}. @end table @item current_line_number(-@var{LineNumber}) @findex current_line_number/1 @saindex current_line_number/1 @cnindex current_line_number/1 Unify @var{LineNumber} with the line number for the current stream. @item current_line_number(+@var{Stream},-@var{LineNumber}) @findex current_line_number/2 @saindex current_line_number/2 @cnindex current_line_number/2 Unify @var{LineNumber} with the line number for the @var{Stream}. @item line_count(+@var{Stream},-@var{LineNumber}) @findex line_count/2 @syindex line_count/2 @cnindex line_count/2 Unify @var{LineNumber} with the line number for the @var{Stream}. @item character_count(+@var{Stream},-@var{CharacterCount}) @findex character_count/2 @syindex character_count/2 @cnindex character_count/2 Unify @var{CharacterCount} with the number of characters written to or read to @var{Stream}. @item line_position(+@var{Stream},-@var{LinePosition}) @findex line_position/2 @syindex line_position/2 @cnindex line_position/2 Unify @var{LinePosition} with the position on current text stream @var{Stream}. @item stream_position(+@var{Stream},-@var{StreamPosition}) @findex stream_position/2 @syindex stream_position/2 @cnindex stream_position/2 Unify @var{StreamPosition} with the packaged information of position on current stream @var{Stream}. Use @code{stream_position_data/3} to retrieve information on charater or line count. @item stream_position_data(+@var{Field},+@var{StreamPsition},-@var{Info}) @findex stream_position_data/3 @syindex stream_position_data/3 @cnindex stream_position_data/3 Given the packaged stream position term @var{StreamPosition}, unify @var{Info} with @var{Field} @code{line_count}, @code{byte_count}, or @code{char_count}. @end table @node C-Prolog File Handling, I/O of Terms, Streams and Files, I/O @subsection Handling Streams and Files @table @code @item tell(+@var{S}) @findex tell/1 @syindex tell/1 @cyindex tell/1 If @var{S} is a currently opened stream for output, it becomes the current output stream. If @var{S} is an atom it is taken to be a filename. If there is no output stream currently associated with it, then it is opened for output, and the new output stream created becomes the current output stream. If it is not possible to open the file, an error occurs. If there is a single opened output stream currently associated with the file, then it becomes the current output stream; if there are more than one in that condition, one of them is chosen. Whenever @var{S} is a stream not currently opened for output, an error may be reported, depending on the state of the file_errors flag. The predicate just fails, if @var{S} is neither a stream nor an atom. @item telling(-@var{S}) @findex telling/1 @syindex telling/1 @cyindex telling/1 The current output stream is unified with @var{S}. @item told @findex told/0 @syindex told/0 @cyindex told/0 Closes the current output stream, and the user's terminal becomes again the current output stream. It is important to remember to close streams after having finished using them, as the maximum number of simultaneously opened streams is 17. @item see(+@var{S}) @findex see/1 @syindex see/1 @cyindex see/1 If @var{S} is a currently opened input stream then it is assumed to be the current input stream. If @var{S} is an atom it is taken as a filename. If there is no input stream currently associated with it, then it is opened for input, and the new input stream thus created becomes the current input stream. If it is not possible to open the file, an error occurs. If there is a single opened input stream currently associated with the file, it becomes the current input stream; if there are more than one in that condition, then one of them is chosen. When @var{S} is a stream not currently opened for input, an error may be reported, depending on the state of the @code{file_errors} flag. If @var{S} is neither a stream nor an atom the predicates just fails. @item seeing(-@var{S}) @findex seeing/1 @syindex seeing/1 @cyindex seeing/1 The current input stream is unified with @var{S}. @item seen @findex seen/0 @syindex seen/0 @cyindex seen/0 Closes the current input stream (see 6.7.). @end table @node I/O of Terms, I/O of Characters, C-Prolog File Handling, I/O @subsection Handling Input/Output of Terms @table @code @item read(-@var{T}) [ISO] @findex read/1 @syindex read/1 @cyindex read/1 Reads the next term from the current input stream, and unifies it with @var{T}. The term must be followed by a dot ('.') and any blank-character as previously defined. The syntax of the term must match the current declarations for operators (see op). If the end-of-stream is reached, @var{T} is unified with the atom @code{end_of_file}. Further reads from of the same stream may cause an error failure (see @code{open/3}). @item read_term(-@var{T},+@var{Options}) [ISO] @findex read_term/2 @saindex read_term/2 @cnindex read_term/2 Reads term @var{T} from the current input stream with execution controlled by the following options: @table @code @item term_position(-@var{Position}) @findex term_position/1 (read_term/2 option) Unify @var{Position} with a term describing the position of the stream at the start of parse. Use @code{stream_position_data/3} to obtain extra information. @item singletons(-@var{Names}) @findex singletons/1 (read_term/2 option) Unify @var{Names} with a list of the form @var{Name=Var}, where @var{Name} is the name of a non-anonymous singleton variable in the original term, and @code{Var} is the variable's representation in YAP. @item syntax_errors(+@var{Val}) @findex syntax_errors/1 (read_term/2 option) Control action to be taken after syntax errors. See @code{yap_flag/2} for detailed information. @item variable_names(-@var{Names}) @findex variable_names/1 (read_term/2 option) Unify @var{Names} with a list of the form @var{Name=Var}, where @var{Name} is the name of a non-anonymous variable in the original term, and @var{Var} is the variable's representation in YAP. @item variables(-@var{Names}) @findex variables/1 (read_term/2 option) Unify @var{Names} with a list of the variables in term @var{T}. @end table @item char_conversion(+@var{IN},+@var{OUT}) [ISO] @findex char_conversion/2 @syindex char_conversion/2 @cnindex char_conversion/2 While reading terms convert unquoted occurrences of the character @var{IN} to the character @var{OUT}. Both @var{IN} and @var{OUT} must be bound to single characters atoms. Character conversion only works if the flag @code{char_conversion} is on. This is default in the @code{iso} and @code{sicstus} language modes. As an example, character conversion can be used for instance to convert characters from the ISO-LATIN-1 character set to ASCII. If @var{IN} is the same character as @var{OUT}, @code{char_conversion/2} will remove this conversion from the table. @item current_char_conversion(?@var{IN},?@var{OUT}) [ISO] @findex current_char_conversion/2 @syindex current_char_conversion/2 @cnindex current_char_conversion/2 If @var{IN} is unbound give all current character translations. Otherwise, give the translation for @var{IN}, if one exists. @item write(@var{T}) [ISO] @findex write/1 @syindex write/1 @cyindex write/1 The term @var{T} is written to the current output stream according to the operator declarations in force. @item display(+@var{T}) @findex display/1 @syindex display/1 @cyindex display/1 Displays term @var{T} on the current output stream. All Prolog terms are written in standard parenthesized prefix notation. @item write_canonical(+@var{T}) [ISO] @findex display/1 @syindex display/1 @cnindex display/1 Displays term @var{T} on the current output stream. Atoms are quoted when necessary, and operators are ignored, that is, the term is written in standard parenthesized prefix notation. @item write_term(+@var{T}, +@var{Opts}) [ISO] @findex write_term/2 @syindex write_term/2 @cnindex write_term/2 Displays term @var{T} on the current output stream, according to the following options: @table @code @item quoted(+@var{Bool}) If @code{true}, quote atoms if this would be necessary for the atom to be recognized as an atom by YAP's parser. The default value is @code{false}. @item ignore_ops(+@var{Bool}) If @code{true}, ignore operator declarations when writing the term. The default value is @code{false}. @item numbervars(+@var{Bool}) If @code{true}, output terms of the form @code{'$VAR'(N)}, where @var{N} is an integer, as a sequence of capital letters. The default value is @code{false}. @item portrayed(+@var{Bool}) If @code{true}, use @t{portray/1} to portray bound terms. The default value is @code{false}. @item max_depth(+@var{Depth}) If @code{Depth} is a positive integer, use @t{Depth} as the maximum depth to portray a term. The default is @code{0}, that is, unlimited depth. @end table @item writeq(@var{T}) [ISO] @findex writeq/1 @syindex writeq/1 @cyindex writeq/1 Writes the term @var{T}, quoting names to make the result acceptable to the predicate 'read' whenever necessary. @item print(@var{T}) @findex print/1 @syindex print/1 @cyindex print/1 Prints the term @var{T} to the current output stream using @code{write/1} unless T is bound and a call to the user-defined predicate @code{portray/1} succeeds. To do pretty printing of terms the user should define suitable clauses for @code{portray/1} and use @code{print/1}. @item format(+@var{T},+@var{L}) @findex format/2 @saindex format/2 @cnindex format/2 Print formatted output to the current output stream. The arguments in list @var{L} are output according to the string or atom @var{T}. A control sequence is introduced by a @code{w}. The following control sequences are available in YAP: @table @code @item '~~' Print a single tilde. @item '~a' The next argument must be an atom, that will be printed as if by @code{write}. @item '~Nc' The next argument must be an integer, that will be printed as a character code. The number @var{N} is the number of times to print the character (default 1). @item '~Ne' @itemx '~NE' @itemx '~Nf' @itemx '~Ng' @itemx '~NG' The next argument must be a floating point number. The float @var{F}, the number @var{N} and the control code @code{c} will be passed to @code{printf} as: @example printf("%s.Nc", F) @end example As an example: @example ?- format("~8e, ~8E, ~8f, ~8g, ~8G~w", [3.14,3.14,3.14,3.14,3.14,3.14]). 3.140000e+00, 3.140000E+00, 3.140000, 3.14, 3.143.14 @end example @item '~Nd' The next argument must be an integer, and @var{N} is the number of digits after the decimal point. If @var{N} is @code{0} no decimal points will be printed. The default is @var{N = 0}. @example ?- format("~2d, ~d",[15000, 15000]). 150.00, 15000 @end example @item '~ND' Identical to @code{'~Nd'}, except that commas are used to separate groups of three digits. @example ?- format("~2D, ~D",[150000, 150000]). 1,500.00, 150,000 @end example @item '~i' Ignore the next argument in the list of arguments: @example ?- format('The ~i met the boregrove',[mimsy]). The met the boregrove @end example @item '~k' Print the next argument with @code{write_canonical}: @example ?- format("Good night ~k",a+[1,2]). Good night +(a,[1,2]) @end example @item '~Nn' Print @var{N} newlines (where @var{N} defaults to 1). @item '~NN' Print @var{N} newlines if at the beginning of the line (where @var{N} defaults to 1). @item '~Nr' The next argument must be an integer, and @var{N} is interpreted as a radix, such that @code{2 <= N <= 36} (the default is 8). @example ?- format("~2r, 0x~16r, ~r", [150000, 150000, 150000]). 100100100111110000, 0x249f0, 444760 @end example @noindent Note that the letters @code{a-z} denote digits larger than 9. @item '~NR' Similar to '~NR'. The next argument must be an integer, and @var{N} is interpreted as a radix, such that @code{2 <= N <= 36} (the default is 8). @example ?- format("~2r, 0x~16r, ~r", [150000, 150000, 150000]). 100100100111110000, 0x249F0, 444760 @end example @noindent The only difference is that letters @code{A-Z} denote digits larger than 9. @item '~p' Print the next argument with @code{print/1}: @example ?- format("Good night ~p",a+[1,2]). Good night a+[1,2] @end example @item '~q' Print the next argument with @code{writeq/1}: @example ?- format("Good night ~q",'Hello'+[1,2]). Good night 'Hello'+[1,2] @end example @item '~Ns' The next argument must be a list of character codes. The system then outputs their representation as a string, where @var{N} is the maximum number of characters for the string (@var{N} defaults to the length of the string). @example ?- format("The ~s are ~4s",["woods","lovely"]). The woods are love @end example @item '~w' Print the next argument with @code{write/1}: @example ?- format("Good night ~w",'Hello'+[1,2]). Good night Hello+[1,2] @end example @end table The number of arguments, @code{N}, may be given as an integer, or it may be given as an extra argument. The next example shows a small procedure to write a variable number of @code{a} characters: @example write_many_as(N) :- format("~*c",[N,0'a]). @end example The @code{format/2} built-in also allows for formatted output. One can specify column boundaries and fill the intermediate space by a padding character: @table @code @item '~N|' Set a column boundary at position @var{N}, where @var{N} defaults to the current position. @item '~N+' Set a column boundary at @var{N} characters past the current position, where @var{N} defaults to @code{8}. @item '~Nt' Set padding for a column, where @var{N} is the fill code (default is @key{SPC}). @end table The next example shows how to align columns and padding. We first show left-alignment: @example @code{ ?- format("~n*Hello~16+*~n",[]). *Hello * } @end example Note that we reserve 16 characters for the column. The following example shows how to do right-alignment: @example @code{ ?- format("*~tHello~16+*~n",[]). * Hello* } @end example The @code{~t} escape sequence forces filling before @code{Hello}. We next show how to do centering: @example @code{ ?- format("*~tHello~t~16+*~n",[]). * Hello * } @end example The two @code{~t} escape sequence force filling both before and after @code{Hello}. Space is then evenly divided between the right and the left sides. @item format(+@var{S},+@var{T},+@var{L}) @findex format/3 @saindex format/3 @cnindex format/3 Print formatted output to stream @var{S}. @end table @node I/O of Characters, I/O for Streams, I/O of Terms, I/O @subsection Handling Input/Output of Characters @table @code @item put(+@var{N}) @findex put/1 @syindex put/1 @cyindex put/1 Outputs to the current output stream the character whose ASCII code is @var{N}. The character @var{N} must be a legal ASCII character code, an expression yielding such a code, or a list in which case only the first element is used. @item put_byte(+@var{N}) [ISO] @findex put_byte/1 @snindex put_byte/1 @cnindex put_byte/1 Outputs to the current output stream the character whose code is @var{N}. The current output stream must be a binary stream. @item put_char(+@var{N}) [ISO] @findex put_char/1 @snindex put_char/1 @cnindex put_char/1 Outputs to the current output stream the character who is used to build the representation of atom @code{A}. The current output stream must be a text stream. @item put_code(+@var{N}) [ISO] @findex put_code/1 @snindex put_code/1 @cnindex put_code/1 Outputs to the current output stream the character whose ASCII code is @var{N}. The current output stream must be a text stream. The character @var{N} must be a legal ASCII character code, an expression yielding such a code, or a list in which case only the first element is used. @item get(-@var{C}) @findex get/1 @syindex get/1 @cyindex get/1 The next non-blank character from the current input stream is unified with @var{C}. Blank characters are the ones whose ASCII codes are not greater than 32. If there are no more non-blank characters in the stream, @var{C} is unified with -1. If @code{end_of_stream} has already been reached in the previous reading, this call will give an error message. @item get0(-@var{C}) @findex get0/1 @syindex get0/1 @cyindex get0/1 The next character from the current input stream is consumed, and then unified with @var{C}. There are no restrictions on the possible values of the ASCII code for the character, but the character will be internally converted by YAP. @item get_byte(-@var{C}) [ISO] @findex get_byte/1 @snindex get_byte/1 @cnindex get_byte/1 If @var{C} is unbound, or is a character code, and the current stream is a binary stream, read the next byte from the current stream and unify its code with @var{C}. @item get_char(-@var{C}) [ISO] @findex get_char/1 @snindex get_char/1 @cnindex get_char/1 If @var{C} is unbound, or is an atom representation of a character, and the current stream is a text stream, read the next character from the current stream and unify its atom representation with @var{C}. @item get_code(-@var{C}) [ISO] @findex get_code/1 @snindex get_code/1 @cnindex get_code/1 If @var{C} is unbound, or is the code for a character, and the current stream is a text stream, read the next character from the current stream and unify its code with @var{C}. @item peek_byte(-@var{C}) [ISO] @findex peek_byte/1 @snindex peek_byte/1 @cnindex peek_byte/1 If @var{C} is unbound, or is a character code, and the current stream is a binary stream, read the next byte from the current stream and unify its code with @var{C}, while leaving the current stream position unaltered. @item peek_char(-@var{C}) [ISO] @findex peek_char/1 @syindex peek_char/1 @cnindex peek_char/1 If @var{C} is unbound, or is an atom representation of a character, and the current stream is a text stream, read the next character from the current stream and unify its atom representation with @var{C}, while leaving the current stream position unaltered. @item peek_code(-@var{C}) [ISO] @findex peek_code/1 @snindex peek_code/1 @cnindex peek_code/1 If @var{C} is unbound, or is the code for a character, and the current stream is a text stream, read the next character from the current stream and unify its code with @var{C}, while leaving the current stream position unaltered. @item skip(+@var{N}) @findex skip/1 @syindex skip/1 @cyindex skip/1 Skips input characters until the next occurrence of the character with ASCII code @var{N}. The argument to this predicate can take the same forms as those for @code{put} (see 6.11). @item tab(+@var{N}) @findex tab/1 @syindex tab/1 @cyindex tab/1 Outputs @var{N} spaces to the current output stream. @item nl [ISO] @findex nl/0 @syindex nl/0 @cyindex nl/0 Outputs a new line to the current output stream. @end table @node I/O for Streams, C-Prolog to Terminal, I/O of Characters, I/O @subsection Input/Output Predicates applied to Streams @table @code @item read(+@var{S},-@var{T}) [ISO] @findex read/2 @syindex read/2 @cnindex read/2 Reads term @var{T} from the stream @var{S} instead of from the current input stream. @item read_term(+@var{S},-@var{T},+@var{Options}) [ISO] @findex read_term/3 @saindex read_term/3 @cnindex read_term/3 Reads term @var{T} from stream @var{S} with execution controlled by the same options as @code{read_term/2}. @item write(+@var{S},@var{T}) [ISO] @findex write/2 @syindex write/2 @cnindex write/2 Writes term @var{T} to stream @var{S} instead of to the current output stream. @item write_canonical(+@var{S},+@var{T}) [ISO] @findex display/1 @syindex display/1 @cnindex display/1 Displays term @var{T} on the stream @var{S}. Atoms are quoted when necessary, and operators are ignored. @item write_term(+@var{S}, +@var{T}, +@var{Opts}) [ISO] @findex write_term/3 @syindex write_term/3 @cnindex write_term/3 Displays term @var{T} on the current output stream, according to the same options used by @code{write_term/3}. @item writeq(+@var{S},@var{T}) [ISO] @findex writeq/2 @syindex writeq/2 @cnindex writeq/2 As @code{writeq/1}, but the output is sent to the stream @var{S}. @item display(+@var{S},@var{T}) @findex display/2 @syindex display/2 @cnindex display/2 Like @code{display/1}, but using stream @var{S} to display the term. @item print(+@var{S},@var{T}) @findex print/2 @syindex print/2 @cnindex print/2 Prints term @var{T} to the stream @var{S} instead of to the current output stream. @item put(+@var{S},+@var{N}) @findex put/2 @syindex put/2 @cnindex put/2 As @code{put(N)}, but to stream @var{S}. @item put_byte(+@var{S},+@var{N}) [ISO] @findex put_byte/2 @snindex put_byte/2 @cnindex put_byte/2 As @code{put_byte(N)}, but to binary stream @var{S}. @item put_char(+@var{S},+@var{A}) [ISO] @findex put_char/2 @snindex put_char/2 @cnindex put_char/2 As @code{put_char(A)}, but to text stream @var{S}. @item put_code(+@var{S},+@var{N}) [ISO] @findex put_code/2 @snindex put_code/2 @cnindex put_code/2 As @code{put_code(N)}, but to text stream @var{S}. @item get(+@var{S},-@var{C}) @findex get/2 @syindex get/2 @cnindex get/2 The same as @code{get(C)}, but from stream @var{S}. @item get0(+@var{S},-@var{C}) @findex get0/2 @syindex get0/2 @cnindex get0/2 The same as @code{get0(C)}, but from stream @var{S}. @item get_byte(+@var{S},-@var{C}) [ISO] @findex get_byte/2 @snindex get_byte/2 @cnindex get_byte/2 If @var{C} is unbound, or is a character code, and the stream @var{S} is a binary stream, read the next byte from that stream and unify its code with @var{C}. @item get_char(+@var{S},-@var{C}) [ISO] @findex get_char/2 @snindex get_char/2 @cnindex get_char/2 If @var{C} is unbound, or is an atom representation of a character, and the stream @var{S} is a text stream, read the next character from that stream and unify its representation as an atom with @var{C}. @item get_code(+@var{S},-@var{C}) [ISO] @findex get_code/2 @snindex get_code/2 @cnindex get_code/2 If @var{C} is unbound, or is a character code, and the stream @var{S} is a text stream, read the next character from that stream and unify its code with @var{C}. @item peek_byte(+@var{S},-@var{C}) [ISO] @findex peek_byte/2 @snindex peek_byte/2 @cnindex peek_byte/2 If @var{C} is unbound, or is a character code, and @var{S} is a binary stream, read the next byte from the current stream and unify its code with @var{C}, while leaving the current stream position unaltered. @item peek_char(+@var{S},-@var{C}) [ISO] @findex peek_char/2 @snindex peek_char/2 @cnindex peek_char/2 If @var{C} is unbound, or is an atom representation of a character, and the stream @var{S} is a text stream, read the next character from that stream and unify its representation as an atom with @var{C}, while leaving the current stream position unaltered. @item peek_code(+@var{S},-@var{C}) [ISO] @findex peek_code/2 @snindex peek_code/2 @cnindex peek_code/2 If @var{C} is unbound, or is an atom representation of a character, and the stream @var{S} is a text stream, read the next character from that stream and unify its representation as an atom with @var{C}, while leaving the current stream position unaltered. @item skip(+@var{S},-@var{C}) @findex skip/2 @syindex skip/2 @cnindex skip/2 Like @code{skip/1}, but using stream @var{S} instead of the current input stream. @item tab(+@var{S},+@var{N}) @findex tab/2 @syindex tab/2 @cnindex tab/2 The same as @code{tab/1}, but using stream @var{S}. @item nl(+@var{S}) @findex nl/1 @syindex nl/1 @cnindex nl/1 Outputs a new line to stream @var{S}. @end table @node C-Prolog to Terminal, I/O Control, I/O for Streams, I/O @subsection Compatible C-Prolog predicates for Terminal I/O @table @code @item ttyput(+@var{N}) @findex ttyput/1 @syindex ttyput/1 @cnindex ttyput/1 As @code{put(N)} but always to @code{user_output}. @item ttyget(-@var{C}) @findex ttyget/1 @syindex ttyget/1 @cnindex ttyget/1 The same as @code{get(C)}, but from stream @code{user_input}. @item ttyget0(-@var{C}) @findex ttyget0/1 @syindex ttyget0/1 @cnindex ttyget0/1 The same as @code{get0(C)}, but from stream @code{user_input}. @item ttyskip(-@var{C}) @findex ttyskip/1 @syindex ttyskip/1 @cnindex ttyskip/1 Like @code{skip/1}, but always using stream @code{user_input}. stream. @item ttytab(+@var{N}) @findex ttytab/1 @syindex ttytab/1 @cnindex ttytab/1 The same as @code{tab/1}, but using stream @code{user_output}. @item ttynl @findex ttynl/0 @syindex ttynl/0 @cnindex ttynl/0 Outputs a new line to stream @code{user_output}. @end table @node I/O Control, Sockets, C-Prolog to Terminal, I/O @subsection Controlling Input/Output @table @code @item exists(+@var{F}) @findex exists/1 @snindex exists/1 @cyindex exists/1 Checks if file @var{F} exists in the current directory. @item nofileerrors @findex nofileerrors/0 @syindex nofileerrors/0 @cyindex nofileerrors/0 Switches off the file_errors flag, so that the predicates @code{see/1}, @code{tell/1}, @code{open/3} and @code{close/1} just fail, instead of producing an error message and aborting whenever the specified file cannot be opened or closed. @item fileerrors @findex fileerrors/0 @syindex fileerrors/0 @cyindex fileerrors/0 Switches on the file_errors flag so that in certain error conditions I/O predicates will produce an appropriated message and abort. @item write_depth(@var{T},@var{L},@var{A}) @findex write_depth/3 @snindex write_depth/3 @cnindex write_depth/3 Unifies @var{T} with the value of the maximum depth of a term to be written, @var{L} with the maximum length of a list to write, and @var{A} with the maximum number of arguments of a compound term to write. The setting will be used by @code{write/1} or @code{write/2}. The default value for all arguments is 0, meaning unlimited depth and length. @example ?- write_depth(3,5,5). yes ?- write(a(b(c(d(e(f(g))))))). a(b(c(....))) yes ?- write([1,2,3,4,5,6,7,8]). [1,2,3,4,5,...] yes ?- write(a(1,2,3,4,5,6,7,8)). a(1,2,3,4,5,...) yes @end example @item write_depth(@var{T},@var{L}) @findex write_depth/2 @snindex write_depth/2 Same as @code{write_depth(@var{T},@var{L},_)}. Unifies @var{T} with the value of the maximum depth of a term to be written, and @var{L} with the maximum length of a list to write. The setting will be used by @code{write/1} or @code{write/2}. The default value for all arguments is 0, meaning unlimited depth and length. @example ?- write_depth(3,5,5). yes ?- write(a(b(c(d(e(f(g))))))). a(b(c(....))) yes ?- write([1,2,3,4,5,6,7,8]). [1,2,3,4,5,...] yes @end example @item always_prompt_user @findex always_prompt_user/0 @snindex always_prompt_user/0 @cnindex always_prompt_user/0 Force the system to prompt the user even if the @code{user_input} stream is not a terminal. This command is useful if you want to obtain interactive control from a pipe or a socket. @end table @node Sockets, , I/O Control, I/O @subsection Using Sockets From YAP YAP includes a SICStus Prolog compatible socket interface. This is a low level interface that provides direct access to the major socket system calls. These calls can be used both to open a new connection in the network or connect to a networked server. Socket connections are described as read/write streams, and standard I/O built-ins can be used to write on or read from sockets. The following calls are available: @table @code @item socket(+@var{DOMAIN},+@var{TYPE},+@var{PROTOCOL},-@var{SOCKET}) @findex socket/4 @syindex socket/4 @cnindex socket/4 Corresponds to the BSD system call @code{socket}. Create a socket for domain @var{DOMAIN} of type @var{TYPE} and protocol @var{PROTOCOL}. Both @var{DOMAIN} and @var{TYPE} should be atoms, whereas @var{PROTOCOL} must be an integer. The new socket object is accessible through a descriptor bound to the variable @var{SOCKET}. The current implementation of YAP only accepts two socket domains: @code{'AF_INET'} and @code{'AF_UNIX'}. Socket types depend on the underlying operating system, but at least the following types are supported: @code{'SOCK_STREAM'} and @code{'SOCK_DGRAM'}. @item socket(+@var{DOMAIN},-@var{SOCKET}) @findex socket/2 @syindex socket/2 @cnindex socket/2 Call @code{socket/4} with @var{TYPE} bound to @code{'SOCK_STREAM'} and @var{PROTOCOL} bound to @code{0}. @item socket_close(+@var{SOCKET}) @findex socket_close/1 @syindex socket_close/1 @cnindex socket_close/1 Close socket @var{SOCKET}. Note that sockets used in @code{socket_connect} (that is, client sockets) should not be closed with @code{socket_close}, as they will be automatically closed when the corresponding stream is closed with @code{close/1} or @code{close/2}. @item socket_bind(+@var{SOCKET}, ?@var{PORT}) @findex socket_bind/2 @syindex socket_bind/2 @cnindex socket_bind/2 Interface to system call @code{bind}, as used for servers: bind socket to a port. Port information depends on the domain: @table @code @item 'AF_UNIX'(+@var{FILENAME}) @item 'AF_FILE'(+@var{FILENAME}) use file name @var{FILENAME} for UNIX or local sockets. @item 'AF_INET'(?@var{HOST},?PORT) If @var{HOST} is bound to an atom, bind to host @var{HOST}, otherwise if unbound bind to local host (@var{HOST} remains unbound). If port @var{PORT} is bound to an integer, try to bind to the corresponding port. If variable @var{PORT} is unbound allow operating systems to choose a port number, which is unified with @var{PORT}. @end table @item socket_connect(+@var{SOCKET}, +@var{PORT}, -@var{STREAM}) @findex socket_connect/3 @syindex socket_connect/3 @cnindex socket_connect/3 Interface to system call @code{connect}, used for clients: connect socket @var{SOCKET} to @var{PORT}. The connection results in the read/write stream @var{STREAM}. Port information depends on the domain: @table @code @item 'AF_UNIX'(+@var{FILENAME}) @item 'AF_FILE'(+@var{FILENAME}) connect to socket at file @var{FILENAME}. @item 'AF_INET'(+@var{HOST},+@var{PORT}) Connect to socket at host @var{HOST} and port @var{PORT}. @end table @item socket_listen(+@var{SOCKET}, +@var{LENGTH}) @findex socket_listen/2 @syindex socket_listen/2 @cnindex socket_listen/2 Interface to system call @code{listen}, used for servers to indicate willingness to wait for connections at socket @var{SOCKET}. The integer @var{LENGTH} gives the queue limit for incoming connections, and should be limited to @code{5} for portable applications. The socket must be of type @code{SOCK_STREAM} or @code{SOCK_SEQPACKET}. @item socket_accept(+@var{SOCKET}, -@var{STREAM}) @findex socket_accept/2 @syindex socket_accept/2 @cnindex socket_accept/2 @item socket_accept(+@var{SOCKET}, -@var{CLIENT}, -@var{STREAM}) @findex socket_accept/3 @syindex socket_accept/3 @cnindex socket_accept/3 Interface to system call @code{accept}, used for servers to wait for connections at socket @var{SOCKET}. The stream descriptor @var{STREAM} represents the resulting connection. If the socket belongs to the domain @code{'AF_INET'}, @var{CLIENT} unifies with an atom containing the IP address for the client in numbers and dots notation. @item socket_accept(+@var{SOCKET}, -@var{STREAM}) @findex socket_accept/2 @syindex socket_accept/2 @cnindex socket_accept/2 Accept a connection but do not return client information. @item socket_buffering(+@var{SOCKET}, -@var{MODE}, -@var{OLD}, +@var{NEW}) @findex socket_buffering/4 @syindex socket_buffering/4 @cnindex socket_buffering/4 Set buffering for @var{SOCKET} in @code{read} or @code{write} @var{MODE}. @var{OLD} is unified with the previous status, and @var{NEW} receives the new status which may be one of @code{unbuf} or @code{fullbuf}. @item socket_select(+@var{SOCKETS}, -@var{NEWSTREAMS}, +@var{TIMEOUT}, +@var{STREAMS}, -@var{READSTREAMS}) @findex socket_select/5 @syindex socket_select/5 @cnindex socket_select/5 Interface to system call @code{select}, used for servers to wait for connection requests or for data at sockets. The variable @var{SOCKETS} is a list of form @var{KEY-SOCKET}, where @var{KEY} is an user-defined identifier and @var{SOCKET} is a socket descriptor. The variable @var{TIMEOUT} is either @code{off}, indicating execution will wait until something is available, or of the form @var{SEC-USEC}, where @var{SEC} and @var{USEC} give the seconds and microseconds before @code{socket_select/5} returns. The variable @var{SOCKETS} is a list of form @var{KEY-STREAM}, where @var{KEY} is an user-defined identifier and @var{STREAM} is a stream descriptor Execution of @code{socket_select/5} unifies @var{READSTREAMS} from @var{STREAMS} with readable data, and @var{NEWSTREAMS} with a list of the form @var{KEY-STREAM}, where @var{KEY} was the key for a socket with pending data, and @var{STREAM} the stream descriptor resulting from accepting the connection. @item current_host(?@var{HOSTNAME}) Unify @var{HOSTNAME} with an atom representing the fully qualified hostname for the current host. Also succeeds if @var{HOSTNAME} is bound to the unqualified hostname. @item hostname_address(?@var{HOSTNAME},?@var{IP_ADDRESS}) @var{HOSTNAME} is an host name and @var{IP_ADDRESS} its IP address in number and dots notation. @end table @node Database, Sets, I/O, Top @section Using the Clausal Data Base Predicates in YAP may be dynamic or static. By default, when consulting or reconsulting, predicates are assumed to be static: execution is faster and the code will probably use less space. Static predicates impose some restrictions: in general there can be no addition or removal of clauses for a procedure if it is being used in the current execution. Dynamic predicates allow programmers to change the Clausal Data Base with the same flexibility as in C-Prolog. With dynamic predicates it is always possible to add or remove clauses during execution and the semantics will be the same as for C-Prolog. But the programmer should be aware of the fact that asserting or retracting are still expensive operations, and therefore he should try to avoid them whenever possible. @table @code @item dynamic +@var{P} @findex dynamic/1 @saindex dynamic/1 @cnindex dynamic/1 Declares predicate @var{P} or list of predicates [@var{P1},...,@var{Pn}] as a dynamic predicate. @var{P} must be written in form: @var{name/arity}. @example :- dynamic god/1. @end example @noindent a more convenient form can be used: @example :- dynamic son/3, father/2, mother/2. @end example or, equivalently, @example :- dynamic [son/3, father/2, mother/2]. @end example @noindent Note: a predicate is assumed to be dynamic when asserted before being defined. @item dynamic_predicate(+@var{P},+@var{Semantics}) @findex dynamic_predicate/2 @snindex dynamic_predicate/2 @cnindex dynamic_predicate/2 Declares predicate @var{P} or list of predicates [@var{P1},...,@var{Pn}] as a dynamic predicate following either @code{logical} or @code{immediate} semantics. @menu Subnodes of Database * Modifying the Database:: Asserting and Retracting * Looking at the Database:: Finding out what is in the Data Base * Database References:: Using Data Base References * Internal Database:: YAP's Internal Database * BlackBoard:: Storing and Fetching Terms in the BlackBoard @end menu @end table @node Modifying the Database, Looking at the Database, , Database @subsection Modification of the Data Base These predicates can be used either for static or for dynamic predicates: @table @code @item assert(+@var{C}) @findex assert/1 @saindex assert/1 @caindex assert/1 Adds clause @var{C} to the program. If the predicate is undefined, declare it as dynamic. Most Prolog systems only allow asserting clauses for dynamic predicates. This is also as specified in the ISO standard. YAP allows asserting clauses for static predicates, as long as the predicate is not in use and the language flag is @t{cprolog}. Note that this feature is deprecated, if you want to assert clauses for static procedures you should use @code{assert_static/1}. @item asserta(+@var{C}) [ISO] @findex asserta/1 @saindex asserta/1 @caindex asserta/1 Adds clause @var{C} to the beginning of the program. If the predicate is undefined, declare it as dynamic. @item assertz(+@var{C}) [ISO] @findex assertz/1 @saindex assertz/1 @caindex assertz/1 Adds clause @var{C} to the end of the program. If the predicate is undefined, declare it as dynamic. Most Prolog systems only allow asserting clauses for dynamic predicates. This is also as specified in the ISO standard. YAP allows asserting clauses for static predicates. The current version of YAP supports this feature, but this feature is deprecated and support may go away in future versions. @item abolish(+@var{PredSpec}) [ISO] @findex abolish/1 @saindex abolish/1 @caindex abolish/1 Deletes the predicate given by @var{PredSpec} from the database. If @var{PredSpec} is an unbound variable, delete all predicates for the current module. The specification must include the name and arity, and it may include module information. Under @t{iso} language mode this built-in will only abolish dynamic procedures. Under other modes it will abolish any procedures. @item abolish(+@var{P},+@var{N}) @findex abolish/2 @saindex abolish/2 @caindex abolish/2 Deletes the predicate with name @var{P} and arity @var{N}. It will remove both static and dynamic predicates. @item assert_static(:@var{C}) @findex assert_static/1 @snindex assert_static/1 @cnindex assert_static/1 Adds clause @var{C} to a static procedure. Asserting a static clause for a predicate while choice-points for the predicate are available has undefined results. @item asserta_static(:@var{C}) @findex asserta_static/1 @snindex asserta_static/1 @cnindex asserta_static/1 Adds clause @var{C} to the beginning of a static procedure. @item assertz_static(:@var{C}) @findex assertz_static/1 @snindex assertz_static/1 @cnindex assertz_static/1 Adds clause @var{C} to the end of a static procedure. Asserting a static clause for a predicate while choice-points for the predicate are available has undefined results. @end table The following predicates can be used for dynamic predicates and for static predicates, if source mode was on when they were compiled: @table @code @item clause(+@var{H},@var{B}) [ISO] @findex clause/2 @saindex clause/2 @caindex clause/2 A clause whose head matches @var{H} is searched for in the program. Its head and body are respectively unified with @var{H} and @var{B}. If the clause is a unit clause, @var{B} is unified with @var{true}. This predicate is applicable to static procedures compiled with @code{source} active, and to all dynamic procedures. @item clause(+@var{H},@var{B},-@var{R}) @findex clause/3 @saindex clause/3 @caindex clause/3 The same as @code{clause/2}, plus @var{R} is unified with the reference to the clause in the database. You can use @code{instance/2} to access the reference's value. Note that you may not use @code{erase/1} on the reference on static procedures. @item nth_clause(+@var{H},@var{I},-@var{R}) @findex nth_clause/3 @saindex nth_clause/3 @caindex nth_clause/3 Find the @var{I}th clause in the predicate defining @var{H}, and give a reference to the clause. Alternatively, if the reference @var{R} is given the head @var{H} is unified with a description of the predicate and @var{I} is bound to its position. @end table The following predicates can only be used for dynamic predicates: @table @code @item retract(+@var{C}) [ISO] @findex retract/1 @saindex retract/1 @cnindex retract/1 Erases the first clause in the program that matches @var{C}. This predicate may also be used for the static predicates that have been compiled when the source mode was @code{on}. For more information on @code{source/0} (@pxref{Setting the Compiler}). @item retractall(+@var{G}) @findex retractall/1 @saindex retractall/1 @cnindex retractall/1 Retract all the clauses whose head matches the goal @var{G}. Goal @var{G} must be a call to a dynamic predicate. @end table @node Looking at the Database, Database References, Modifying the Database, Database @subsection Looking at the Data Base @table @code @item listing @findex listing/0 @saindex listing/0 @caindex listing/0 Lists in the current output stream all the clauses for which source code is available (these include all clauses for dynamic predicates and clauses for static predicates compiled when source mode was @code{on}). @item listing(+@var{P}) @findex listing/1 @syindex listing/1 @caindex listing/1 Lists predicate @var{P} if its source code is available. @item portray_clause(+@var{C}) @findex portray_clause/1 @syindex portray_clause/1 @cnindex portray_clause/1 Write clause @var{C} as if written by @code{listing/0}. @item portray_clause(+@var{S},+@var{C}) @findex portray_clause/2 @syindex portray_clause/2 @cnindex portray_clause/2 Write clause @var{C} on stream @var{S} as if written by @code{listing/0}. @item current_atom(@var{A}) @findex current_atom/1 @syindex current_atom/1 @cyindex current_atom/1 Checks whether @var{A} is a currently defined atom. It is used to find all currently defined atoms by backtracking. @item current_predicate(@var{F}) [ISO] @findex current_predicate/1 @syindex current_predicate/1 @cyindex current_predicate/1 @var{F} is the predicate indicator for a currently defined user or library predicate. @var{F} is of the form @var{Na/Ar}, where the atom @var{Na} is the name of the predicate, and @var{Ar} its arity. @item current_predicate(@var{A},@var{P}) @findex current_predicate/2 @syindex current_predicate/2 @cnindex current_predicate/2 Defines the relation: @var{P} is a currently defined predicate whose name is the atom @var{A}. @item system_predicate(@var{A},@var{P}) @findex system_predicate/2 @syindex system_predicate/2 @cnindex system_predicate/2 Defines the relation: @var{P} is a built-in predicate whose name is the atom @var{A}. @item predicate_property(@var{P},@var{Prop}) @findex predicate_property/2 @saindex predicate_property/2 @cnindex predicate_property/2 For the predicates obeying the specification @var{P} unify @var{Prop} with a property of @var{P}. These properties may be: @table @code @item built_in true for built-in predicates, @item dynamic true if the predicate is dynamic @item static true if the predicate is static @item meta_predicate(@var{M}) true if the predicate has a meta_predicate declaration @var{M}. @item multifile true if the predicate was declared to be multifile @item imported_from(@var{Mod}) true if the predicate was imported from module @var{Mod}. @item exported true if the predicate is exported in the current module. @item public true if the predicate is public; note that all dynamic predicates are public. @item tabled true if the predicate is tabled; note that only static predicates can be tabled in YAP. @item source true if source for the predicate is available. @item number_of_clauses(@var{ClauseCount}) Number of clauses in the predicate definition. Always one if external or built-in. @end table @end table @node Database References, Internal Database, Looking at the Database, Database @subsection Using Data Base References Data Base references are a fast way of accessing terms. The predicates @code{erase/1} and @code{instance/1} also apply to these references and may sometimes be used instead of @code{retract/1} and @code{clause/2}. @table @code @item assert(+@var{C},-@var{R}) @findex assert/2 @saindex assert/2 @caindex assert/2 The same as @code{assert(C)} (@pxref{Modifying the Database}) but unifies @var{R} with the database reference that identifies the new clause, in a one-to-one way. Note that @code{asserta/2} only works for dynamic predicates. If the predicate is undefined, it will automatically be declared dynamic. @item asserta(+@var{C},-@var{R}) @findex asserta/2 @saindex asserta/2 @caindex asserta/2 The same as @code{asserta(C)} but unifying @var{R} with the database reference that identifies the new clause, in a one-to-one way. Note that @code{asserta/2} only works for dynamic predicates. If the predicate is undefined, it will automatically be declared dynamic. @item assertz(+@var{C},-@var{R}) @findex assertz/2 @saindex assertz/2 @caindex assertz/2 The same as @code{assertz(C)} but unifying @var{R} with the database reference that identifies the new clause, in a one-to-one way. Note that @code{asserta/2} only works for dynamic predicates. If the predicate is undefined, it will automatically be declared dynamic. @item retract(+@var{C},-@var{R}) @findex retract/2 @saindex retract/2 @caindex retract/2 Erases from the program the clause @var{C} whose database reference is @var{R}. The predicate must be dynamic. @end table @node Internal Database, BlackBoard, Database References, Database @section Internal Data Base Some programs need global information for, e.g. counting or collecting data obtained by backtracking. As a rule, to keep this information, the internal data base should be used instead of asserting and retracting clauses (as most novice programmers do), . In YAP (as in some other Prolog systems) the internal data base (i.d.b. for short) is faster, needs less space and provides a better insulation of program and data than using asserted/retracted clauses. The i.d.b. is implemented as a set of terms, accessed by keys that unlikely what happens in (non-Prolog) data bases are not part of the term. Under each key a list of terms is kept. References are provided so that terms can be identified: each term in the i.d.b. has a unique reference (references are also available for clauses of dynamic predicates). @table @code @item recorda(+@var{K},@var{T},-@var{R}) @findex recorda/3 @saindex recorda/3 @cyindex recorda/3 Makes term @var{T} the first record under key @var{K} and unifies @var{R} with its reference. @item recordz(+@var{K},@var{T},-@var{R}) @findex recordz/3 @saindex recordz/3 @cyindex recordz/3 Makes term @var{T} the last record under key @var{K} and unifies @var{R} with its reference. @item recorda_at(+@var{R0},@var{T},-@var{R}) @findex recorda_at/3 @snindex recorda_at/3 @cnindex recorda_at/3 Makes term @var{T} the record preceding record with reference @var{R0}, and unifies @var{R} with its reference. @item recordz_at(+@var{R0},@var{T},-@var{R}) @findex recordz_at/3 @snindex recordz_at/3 @cnindex recordz_at/3 Makes term @var{T} the record following record with reference @var{R0}, and unifies @var{R} with its reference. @item recordaifnot(+@var{K},@var{T},-@var{R}) @findex recordaifnot/3 @saindex recordaifnot/3 @cnindex recordaifnot/3 If a term equal to @var{T} up to variable renaming is stored under key @var{K} fail. Otherwise, make term @var{T} the first record under key @var{K} and unify @var{R} with its reference. @item recordzifnot(+@var{K},@var{T},-@var{R}) @findex recorda/3 @snindex recorda/3 @cnindex recorda/3 If a term equal to @var{T} up to variable renaming is stored under key @var{K} fail. Otherwise, make term @var{T} the first record under key @var{K} and unify @var{R} with its reference. @item recorded(+@var{K},@var{T},@var{R}) @findex recorded/3 @saindex recorded/3 @cyindex recorded/3 Searches in the internal database under the key @var{K}, a term that unifies with @var{T} and whose reference matches @var{R}. This built-in may be used in one of two ways: @itemize @bullet @item @var{K} may be given, in this case the built-in will return all elements of the internal data-base that match the key. @item @var{R} may be given, if so returning the key and element that match the reference. @end itemize @item nth_instance(?@var{K},?@var{Index},@var{T},?@var{R}) @findex nth_recorded/3 @saindex nth_recorded/3 @cnindex nth_recorded/3 Fetches the @var{Index}nth entry in the internal database under the key @var{K}. Entries are numbered from one. If the key @var{K} are the @var{Index} are bound, a reference is unified with @var{R}. Otherwise, the reference @var{R} must be given, and the term the system will find the matching key and index. @item erase(+@var{R}) @findex erase/1 @saindex erase/1 @cyindex erase/1 The term referred to by @var{R} is erased from the internal database. If reference @var{R} does not exist in the database, @code{erase} just fails. @item erased(+@var{R}) @findex erased/1 @saindex erased/1 @cyindex erased/1 Succeeds if the object whose database reference is @var{R} has been erased. @item instance(+@var{R},-@var{T}) @findex instance/2 @saindex instance/2 @cyindex instance/2 If @var{R} refers to a clause or a recorded term, @var{T} is unified with its most general instance. If @var{R} refers to an unit clause @var{C}, then @var{T} is unified with @code{@var{C} :- true}. When @var{R} is not a reference to an existing clause or to a recorded term, this goal fails. @item eraseall(+@var{K}) @findex eraseall/1 @snindex eraseall/1 @cnindex eraseall/1 All terms belonging to the key @code{K} are erased from the internal database. The predicate always succeeds. @item current_key(?@var{A},?@var{K}) @findex current_key/2 @syindex current_key/2 @cnindex current_key/2 Defines the relation: @var{K} is a currently defined database key whose name is the atom @var{A}. It can be used to generate all the keys for the internal data-base. @item key_statistics(+@var{K},-@var{Entries},-@var{Size},-@var{IndexSize}) @findex key_statistics/4 @snindex key_statistics/4 @cnindex key_statistics/4 Returns several statistics for a key @var{K}. Currently, it says how many entries we have for that key, @var{Entries}, what is the total size spent on entries, @var{Size}, and what is the amount of space spent in indices. @item key_statistics(+@var{K},-@var{Entries},-@var{TotalSize}) @findex key_statistics/3 @snindex key_statistics/3 @cnindex key_statistics/3 Returns several statistics for a key @var{K}. Currently, it says how many entries we have for that key, @var{Entries}, what is the total size spent on this key. @item get_value(+@var{A},-@var{V}) @findex get_value/2 @snindex get_value/2 @cnindex get_value/2 In YAP, atoms can be associated with constants. If one such association exists for atom @var{A}, unify the second argument with the constant. Otherwise, unify @var{V} with @code{[]}. This predicate is YAP specific. @item set_value(+@var{A},+@var{C}) @findex set_value/2 @snindex set_value/2 @cnindex set_value/2 Associate atom @var{A} with constant @var{C}. The @code{set_value} and @code{get_value} built-ins give a fast alternative to the internal data-base. This is a simple form of implementing a global counter. @example read_and_increment_counter(Value) :- get_value(counter, Value), Value1 is Value+1, set_value(counter, Value1). @end example @noindent This predicate is YAP specific. @item recordzifnot(+@var{K},@var{T},-@var{R}) @findex recordzifnot/3 @snindex recordzifnot/3 @cnindex recordzifnot/3 If a variant of @var{T} is stored under key @var{K} fail. Otherwise, make term @var{T} the last record under key @var{K} and unify @var{R} with its reference. This predicate is YAP specific. @item recordaifnot(+@var{K},@var{T},-@var{R}) @findex recordaifnot/3 @snindex recordaifnot/3 @cnindex recordaifnot/3 If a variant of @var{T} is stored under key @var{K} fail. Otherwise, make term @var{T} the first record under key @var{K} and unify @var{R} with its reference. This predicate is YAP specific. @end table There is a strong analogy between the i.d.b. and the way dynamic predicates are stored. In fact, the main i.d.b. predicates might be implemented using dynamic predicates: @example recorda(X,T,R) :- asserta(idb(X,T),R). recordz(X,T,R) :- assertz(idb(X,T),R). recorded(X,T,R) :- clause(idb(X,T),R). @end example @noindent We can take advantage of this, the other way around, as it is quite easy to write a simple Prolog interpreter, using the i.d.b.: @example asserta(G) :- recorda(interpreter,G,_). assertz(G) :- recordz(interpreter,G,_). retract(G) :- recorded(interpreter,G,R), !, erase(R). call(V) :- var(V), !, fail. call((H :- B)) :- !, recorded(interpreter,(H :- B),_), call(B). call(G) :- recorded(interpreter,G,_). @end example @noindent In YAP, much attention has been given to the implementation of the i.d.b., especially to the problem of accelerating the access to terms kept in a large list under the same key. Besides using the key, YAP uses an internal lookup function, transparent to the user, to find only the terms that might unify. For instance, in a data base containing the terms @example b b(a) c(d) e(g) b(X) e(h) @end example @noindent stored under the key k/1, when executing the query @example :- recorded(k(_),c(_),R). @end example @noindent @code{recorded} would proceed directly to the third term, spending almost the time as if @code{a(X)} or @code{b(X)} was being searched. The lookup function uses the functor of the term, and its first three arguments (when they exist). So, @code{recorded(k(_),e(h),_)} would go directly to the last term, while @code{recorded(k(_),e(_),_)} would find first the fourth term, and then, after backtracking, the last one. This mechanism may be useful to implement a sort of hierarchy, where the functors of the terms (and eventually the first arguments) work as secondary keys. In the YAP's i.d.b. an optimized representation is used for terms without free variables. This results in a faster retrieval of terms and better space usage. Whenever possible, avoid variables in terms in terms stored in the i.d.b. @node BlackBoard, , Internal Database, Database @section The Blackboard YAP implements a blackboard in the style of the SICStus Prolog blackboard. The blackboard uses the same underlying mechanism as the internal data-base but has several important differences: @itemize @bullet @item It is module aware, in contrast to the internal data-base. @item Keys can only be atoms or integers, and not compound terms. @item A single term can be stored per key. @item An atomic update operation is provided; this is useful for parallelism. @end itemize @table @code @item bb_put(+@var{Key},?@var{Term}) @findex bb_put/2 @syindex bb_put/2 @cnindex bb_put/2 Store term table @var{Term} in the blackboard under key @var{Key}. If a previous term was stored under key @var{Key} it is simply forgotten. @item bb_get(+@var{Key},?@var{Term}) @findex bb_get/2 @syindex bb_get/2 @cnindex bb_get/2 Unify @var{Term} with a term stored in the blackboard under key @var{Key}, or fail silently if no such term exists. @item bb_delete(+@var{Key},?@var{Term}) @findex bb_delete/2 @syindex bb_delete/2 @cnindex bb_delete/2 Delete any term stored in the blackboard under key @var{Key} and unify it with @var{Term}. Fail silently if no such term exists. @item bb_update(+@var{Key},?@var{Term},?@var{New}) @findex bb_update/3 @syindex bb_update/3 @cnindex bb_update/3 Atomically unify a term stored in the blackboard under key @var{Key} with @var{Term}, and if the unification succeeds replace it by @var{New}. Fail silently if no such term exists or if unification fails. @end table @node Sets, Grammars, Database, Top @section Collecting Solutions to a Goal When there are several solutions to a goal, if the user wants to collect all the solutions he may be led to use the data base, because backtracking will forget previous solutions. YAP allows the programmer to choose from several system predicates instead of writing his own routines. @code{findall/3} gives you the fastest, but crudest solution. The other built-in predicates post-process the result of the query in several different ways: @table @code @item findall(@var{T},+@var{G},-@var{L}) [ISO] @findex findall/3 @syindex findall/3 @cyindex findall/3 Unifies @var{L} with a list that contains all the instantiations of the term @var{T} satisfying the goal @var{G}. With the following program: @example a(2,1). a(1,1). a(2,2). @end example @noindent the answer to the query @example findall(X,a(X,Y),L). @end example @noindent would be: @example X = _32 Y = _33 L = [2,1,2]; no @end example @item findall(@var{T},+@var{G},+@var{L},-@var{L0}) @findex findall/4 @syindex findall/4 @cnindex findall/4 Similar to @code{findall/3}, but appends all answers to list @var{L0}. @item all(@var{T},+@var{G},-@var{L}) @findex all/3 @snindex all/3 @cnindex all/3 Similar to @code{findall(@var{T},@var{G},@var{L})} but eliminate repeated elements. Thus, assuming the same clauses as in the above example, the reply to the query @example all(X,a(X,Y),L). @end example @noindent would be: @example X = _32 Y = _33 L = [2,1]; no @end example Note that @code{all/3} will fail if no answers are found. @item bagof(@var{T},+@var{G},-@var{L}) [ISO] @findex bagof/3 @saindex bagof/3 @cyindex bagof/3 For each set of possible instances of the free variables occurring in @var{G} but not in @var{T}, generates the list @var{L} of the instances of @var{T} satisfying @var{G}. Again, assuming the same clauses as in the examples above, the reply to the query @example bagof(X,a(X,Y),L). would be: X = _32 Y = 1 L = [2,1]; X = _32 Y = 2 L = [2]; no @end example @item setof(@var{X},+@var{P},-@var{B}) [ISO] @findex setof/3 @saindex setof/3 @cyindex setof/3 Similar to @code{bagof(@var{T},@var{G},@var{L})} but sorting list @var{L} and keeping only one copy of each element. Again, assuming the same clauses as in the examples above, the reply to the query @example setof(X,a(X,Y),L). @end example @noindent would be: @example X = _32 Y = 1 L = [1,2]; X = _32 Y = 2 L = [2]; no @end example @end table @node Grammars, OS, Sets, Top @section Grammar Rules Grammar rules in Prolog are both a convenient way to express definite clause grammars and an extension of the well known context-free grammars. A grammar rule is of the form: @example @i{ head --> body } @end example @noindent where both @i{head} and @i{body} are sequences of one or more items linked by the standard conjunction operator ','. @emph{Items can be:} @itemize @bullet @item a @emph{non-terminal} symbol may be either a complex term or an atom. @item a @emph{terminal} symbol may be any Prolog symbol. Terminals are written as Prolog lists. @item an @emph{empty body} is written as the empty list '[ ]'. @item @emph{extra conditions} may be inserted as Prolog procedure calls, by being written inside curly brackets '@{' and '@}'. @item the left side of a rule consists of a nonterminal and an optional list of terminals. @item alternatives may be stated in the right-hand side of the rule by using the disjunction operator ';'. @item the @emph{cut} and @emph{conditional} symbol ('->') may be inserted in the right hand side of a grammar rule @end itemize Grammar related built-in predicates: @table @code @item expand_term(@var{T},-@var{X}) @findex expand_term/2 @syindex expand_term/2 @cyindex expand_term/2 @findex term_expansion/2 @syindex term_expansion/2 @cyindex term_expansion/2 This predicate is used by YAP for preprocessing each top level term read when consulting a file and before asserting or executing it. It rewrites a term @var{T} to a term @var{X} according to the following rules: first try to use the user defined predicate @code{term_expansion/2}. If this call fails then the translating process for DCG rules is applied, together with the arithmetic optimizer whenever the compilation of arithmetic expressions is in progress. @item user:goal_expansion(+@var{G},+@var{M},-@var{NG}) @findex goal_expansion/3 @snindex goal_expansion/3 @cnindex goal_expansion/3 YAP now supports @code{goal_expansion/3}. This is an user-defined procedure that is called after term expansion when compiling or asserting goals for each sub-goal in a clause. The first argument is bound to the goal and the second to the module under which the goal @var{G} will execute. If @code{goal_expansion/3} succeeds the new sub-goal @var{NG} will replace @var{G} and will be processed in the same way. If @code{goal_expansion/3} fails the system will use the default rules. @item phrase(+@var{P},@var{L},@var{R}) @findex phrase/3 @syindex phrase/3 @cnindex phrase/3 This predicate succeeds when the difference list @code{@var{L}-@var{R}} is a phrase of type @var{P}. @item phrase(+@var{P},@var{L}) @findex phrase/2 @syindex phrase/2 @cnindex phrase/2 This predicate succeeds when @var{L} is a phrase of type @var{P}. The same as @code{phrase(P,L,[])}. Both this predicate and the previous are used as a convenient way to start execution of grammar rules. @item 'C'(@var{S1},@var{T},@var{S2}) @findex C/3 @syindex C/3 @cnindex C/3 This predicate is used by the grammar rules compiler and is defined as @code{'C'([H|T],H,T)}. @end table @node OS, Term Modification, Grammars, Top @section Access to Operating System Functionality The following built-in predicates allow access to underlying Operating System functionality: @table @code @item cd(+@var{D}) @findex cd/1 @snindex cd/1 @cnindex cd/1 Changes the current directory (on UNIX environments). @item environ(+@var{E},-@var{S}) @findex environ/2 @syindex environ/2 @cnindex environ/2 @comment This backtrackable predicate unifies the first argument with an @comment environment variable @var{E}, and the second with its value @var{S}. It @comment can used to detect all environment variables. Given an environment variable @var{E} this predicate unifies the second argument @var{S} with its value. @item getcwd(-@var{D}) @findex getcwd/1 @snindex getcwd/1 @cnindex getcwd/1 Unify the current directory, represented as an atom, with the argument @var{D}. @item putenv(+@var{E},+@var{S}) @findex putenv/2 @snindex putenv/2 @cnindex putenv/2 Set environment variable @var{E} to the value @var{S}. If the environment variable @var{E} does not exist, create a new one. Both the environment variable and the value must be atoms. @item rename(+@var{F},+@var{G}) @findex rename/2 @snindex rename/2 @cyindex rename/2 Renames file @var{F} to @var{G}. @item sh @findex sh/0 @snindex sh/0 @cyindex sh/0 Creates a new shell interaction. @item system(+@var{S}) @findex system/1 @snindex system/1 @cyindex system/1 Passes command @var{S} to the Bourne shell (on UNIX environments) or the current command interpreter in WIN32 environments. @item unix(+@var{S}) @findex unix/1 @snindex unix/1 @cnindex unix/1 Access to Unix-like functionality: @table @code @item argv/1 Return a list of arguments to the program. These are the arguments that follow a @code{--}, as in the usual Unix convention. @item cd/0 Change to home directory. @item cd/1 Change to given directory. Acceptable directory names are strings or atoms. @item environ/2 If the first argument is an atom, unify the second argument with the value of the corresponding environment variable. @item getcwd/1 Unify the first argument with an atom representing the current directory. @item putenv/2 Set environment variable @var{E} to the value @var{S}. If the environment variable @var{E} does not exist, create a new one. Both the environment variable and the value must be atoms. @item shell/1 Execute command under current shell. Acceptable commands are strings or atoms. @item system/1 Execute command with @code{/bin/sh}. Acceptable commands are strings or atoms. @item shell/0 Execute a new shell. @end table @item alarm(+@var{Seconds},+@var{Callable},+@var{OldAlarm}) @findex alarm/3 @snindex alarm/3 @cnindex alarm/3 Arranges for YAP to be interrupted in @var{Seconds} seconds, or in @var{Seconds.MicroSeconds}. When interrupted, YAP will execute @var{Callable} and then return to the previous execution. If @var{Seconds} is @code{0}, no new alarm is scheduled. In any event, any previously set alarm is canceled. The variable @var{OldAlarm} unifies with the number of seconds remaining until any previously scheduled alarm was due to be delivered, or with @code{0} if there was no previously scheduled alarm. Note that execution of @var{Callable} will wait if YAP is executing built-in predicates, such as Input/Output operations. The next example shows how @var{alarm/3} can be used to implement a simple clock: @example loop :- loop. ticker :- write('.'), flush_output, get_value(tick, yes), alarm(1,ticker,_). :- set_value(tick, yes), alarm(1,ticker,_), loop. @end example The clock, @code{ticker}, writes a dot and then checks the flag @code{tick} to see whether it can continue ticking. If so, it calls itself again. Note that there is no guarantee that the each dot corresponds a second: for instance, if the YAP is waiting for user input, @code{ticker} will wait until the user types the entry in. The next example shows how @code{alarm/3} can be used to guarantee that a certain procedure does not take longer than a certain amount of time: @example loop :- loop. :- catch((alarm(10, throw(ball), _),loop), ball, format('Quota exhausted.~n',[])). @end example In this case after @code{10} seconds our @code{loop} is interrupted, @code{ball} is thrown, and the handler writes @code{Quota exhausted}. Execution then continues from the handler. Note that in this case @code{loop/0} always executes until the alarm is sent. Often, the code you are executing succeeds or fails before the alarm is actually delivered. In this case, you probably want to disable the alarm when you leave the procedure. The next procedure does exactly so: @example once_with_alarm(Time,Goal,DoOnAlarm) :- catch(execute_once_with_alarm(Time, Goal), alarm, DoOnAlarm). execute_once_with_alarm(Time, Goal) :- alarm(Time, alarm, _), ( call(Goal) -> alarm(0, alarm, _) ; alarm(0, alarm, _), fail). @end example The procedure has three arguments: the @var{Time} before the alarm is sent; the @var{Goal} to execute; and the goal @var{DoOnAlarm} to execute if the alarm is sent. It uses @code{catch/3} to handle the case the @code{alarm} is sent. Then it starts the alarm, calls the goal @var{Goal}, and disables the alarm on success or failure. @item on_signal(+@var{Signal},?@var{OldAction},+@var{Callable}) @findex on_signal/3 @snindex on_signal/3 @cnindex on_signal/3 Set the interrupt handler for soft interrupt @var{Signal} to be @var{Callable}. @var{OldAction} is unified with the previous handler. Only a subset of the software interrupts (signals) can have their handlers manipulated through @code{on_signal/3}. Their POSIX names, YAP names and default behavior is given below. The "YAP name" of the signal is the atom that is associated with each signal, and should be used as the first argument to @code{on_signal/3}. It is chosen so that it matches the signal's POSIX name. @code{on_signal/3} succeeds, unless when called with an invalid signal name or one that is not supported on this platform. No checks are made on the handler provided by the user. @table @code @item sig_up (Hangup) SIGHUP in Unix/Linux; Reconsult the initialization files ~/.yaprc, ~/.prologrc and ~/prolog.ini. @item sig_usr1 and sig_usr2 (User signals) SIGUSR1 and SIGUSR2 in Unix/Linux; Print a message and halt. @end table A special case is made, where if @var{Callable} is bound to @code{default}, then the default handler is restored for that signal. A call in the form @code{on_signal(@var{S},@var{H},@var{H})} can be used to retrieve a signal's current handler without changing it. It must be noted that although a signal can be received at all times, the handler is not executed while YAP is waiting for a query at the prompt. The signal will be, however, registered and dealt with as soon as the user makes a query. Please also note, that neither POSIX Operating Systems nor YAP guarantee that the order of delivery and handling is going to correspond with the order of dispatch. @end table @node Term Modification, Global Variables, OS, Top @section Term Modification @cindex updating terms It is sometimes useful to change the value of instantiated variables. Although, this is against the spirit of logic programming, it is sometimes useful. As in other Prolog systems, YAP has several primitives that allow updating Prolog terms. Note that these primitives are also backtrackable. The @code{setarg/3} primitive allows updating any argument of a Prolog compound terms. The @code{mutable} family of predicates provides @emph{mutable variables}. They should be used instead of @code{setarg/3}, as they allow the encapsulation of accesses to updatable variables. Their implementation can also be more efficient for long deterministic computations. @table @code @item setarg(+@var{I},+@var{S},?@var{T}) @findex setarg/3n @snindex setarg/3n @cnindex setarg/3n Set the value of the @var{I}th argument of term @var{S} to term @var{T}. @cindex mutable variables @item create_mutable(+@var{D},-@var{M}) @findex create_mutable/2 @syindex create_mutable/2 @cnindex create_mutable/2 Create new mutable variable @var{M} with initial value @var{D}. @item get_mutable(?@var{D},+@var{M}) @findex get_mutable/2 @syindex get_mutable/2 @cnindex get_mutable/2 Unify the current value of mutable term @var{M} with term @var{D}. @item is_mutable(?@var{D}) @findex is_mutable/1 @syindex is_mutable/1 @cnindex is_mutable/1 Holds if @var{D} is a mutable term. @item get_mutable(?@var{D},+@var{M}) @findex get_mutable/2 @syindex get_mutable/2 @cnindex get_mutable/2 Unify the current value of mutable term @var{M} with term @var{D}. @item update_mutable(+@var{D},+@var{M}) @findex update_mutable/2 @syindex update_mutable/2 @cnindex update_mutable/2 Set the current value of mutable term @var{M} to term @var{D}. @end table @node Global Variables, Profiling, Term Modification, Top @section Global Variables @cindex global variables Global variables are associations between names (atoms) and terms. They differ in various ways from storing information using @code{assert/1} or @code{recorda/3}. @itemize @bullet @item The value lives on the Prolog (global) stack. This implies that lookup time is independent from the size of the term. This is particularly interesting for large data structures such as parsed XML documents or the CHR global constraint store. @item They support both global assignment using @code{nb_setval/2} and backtrackable assignment using @code{b_setval/2}. @item Only one value (which can be an arbitrary complex Prolog term) can be associated to a variable at a time. @item Their value cannot be shared among threads. Each thread has its own namespace and values for global variables. @end itemize Currently global variables are scoped globally. We may consider module scoping in future versions. Both @code{b_setval/2} and @code{nb_setval/2} implicitly create a variable if the referenced name does not already refer to a variable. Global variables may be initialised from directives to make them available during the program lifetime, but some considerations are necessary for saved-states and threads. Saved-states to not store global variables, which implies they have to be declared with @code{initialization/1} to recreate them after loading the saved state. Each thread has its own set of global variables, starting with an empty set. Using @code{thread_initialization/1} to define a global variable it will be defined, restored after reloading a saved state and created in all threads that are created after the registration. Finally, global variables can be initialised using the exception hook called @code{exception/3}. The latter technique is used by CHR. @table @code @item b_setval(+@var{Name}, +@var{Value}) @findex b_setval/2 @snindex b_setval/2 @cnindex b_setval/2 Associate the term @var{Value} with the atom @var{Name} or replaces the currently associated value with @var{Value}. If @var{Name} does not refer to an existing global variable a variable with initial value [] is created (the empty list). On backtracking the assignment is reversed. @item b_getval(+@var{Name}, -@var{Value}) @findex b_getval/2 @snindex b_getval/2 @cnindex b_getval/2 Get the value associated with the global variable @var{Name} and unify it with @var{Value}. Note that this unification may further instantiate the value of the global variable. If this is undesirable the normal precautions (double negation or @code{copy_term/2}) must be taken. The @code{b_getval/2} predicate generates errors if @var{Name} is not an atom or the requested variable does not exist. @item nb_setval(+@var{Name}, +@var{Value}) @findex nb_setval/2 @snindex nb_setval/2 @cnindex nb_setval/2 Associates a copy of @var{Value} created with @code{duplicate_term/2} with the atom @var{Name}. Note that this can be used to set an initial value other than @code{[]} prior to backtrackable assignment. @item nb_getval(+@var{Name}, -@var{Value}) @findex nb_getval/2 @snindex nb_getval/2 @cnindex nb_getval/2 The @code{nb_getval/2} predicate is a synonym for @code{b_getval/2}, introduced for compatibility and symmetry. As most scenarios will use a particular global variable either using non-backtracable or backtrackable assignment, using @code{nb_getval/2} can be used to document that the variable is used non-backtracable. @item nb_linkval(+@var{Name}, +@var{Value}) @findex nb_linkval/2 @snindex nb_linkval/2 @cnindex nb_linkval/2 Associates the term @var{Value} with the atom @var{Name} without copying it. This is a fast special-purpose variation of @code{nb_setval/2} intended for expert users only because the semantics on backtracking to a point before creating the link are poorly defined for compound terms. The principal term is always left untouched, but backtracking behaviour on arguments is undone if the original assignment was trailed and left alone otherwise, which implies that the history that created the term affects the behaviour on backtracking. Please consider the following example: @example demo_nb_linkval :- T = nice(N), ( N = world, nb_linkval(myvar, T), fail ; nb_getval(myvar, V), writeln(V) ). @end example @item nb_set_shared_val(+@var{Name}, +@var{Value}) @findex nb_set_shared_val/2 @snindex nb_set_shared_val/2 @cnindex nb_set_shared_val/2 Associates the term @var{Value} with the atom @var{Name}, but sharing non-backtrackable terms. This may be useful if you want to rewrite a global variable so that the new copy will survive backtracking, but you want to share structure with the previous term. The next example shows the differences between the three built-ins: @example ?- nb_setval(a,a(_)),nb_getval(a,A),nb_setval(b,t(C,A)),nb_getval(b,B). A = a(_A), B = t(_B,a(_C)) ? ?- nb_setval(a,a(_)),nb_getval(a,A),nb_set_shared_val(b,t(C,A)),nb_getval(b,B). ?- nb_setval(a,a(_)),nb_getval(a,A),nb_linkval(b,t(C,A)),nb_getval(b,B). A = a(_A), B = t(C,a(_A)) ? @end example @item nb_setarg(+@{Arg], +@var{Term}, +@var{Value}) @findex nb_setarg/3 @snindex nb_setarg/3 @cnindex nb_setarg/3 Assigns the @var{Arg}-th argument of the compound term @var{Term} with the given @var{Value} as setarg/3, but on backtracking the assignment is not reversed. If @var{Term} is not atomic, it is duplicated using duplicate_term/2. This predicate uses the same technique as @code{nb_setval/2}. We therefore refer to the description of @code{nb_setval/2} for details on non-backtrackable assignment of terms. This predicate is compatible to GNU-Prolog @code{setarg(A,T,V,false)}, removing the type-restriction on @var{Value}. See also @code{nb_linkarg/3}. Below is an example for counting the number of solutions of a goal. Note that this implementation is thread-safe, reentrant and capable of handling exceptions. Realising these features with a traditional implementation based on assert/retract or flag/3 is much more complicated. @example succeeds_n_times(Goal, Times) :- Counter = counter(0), ( Goal, arg(1, Counter, N0), N is N0 + 1, nb_setarg(1, Counter, N), fail ; arg(1, Counter, Times) ). @end example @item nb_set_shared_arg(+@var{Arg}, +@var{Term}, +@var{Value}) @findex nb_set_shared_arg/3 @snindex nb_set_shared_arg/3 @cnindex nb_set_shared_arg/3 As @code{nb_setarg/3}, but like @code{nb_linkval/2} it does not duplicate the global sub-terms in @var{Value}. Use with extreme care and consult the documentation of @code{nb_linkval/2} before use. @item nb_linkarg(+@var{Arg}, +@var{Term}, +@var{Value}) @findex nb_linkarg/3 @snindex nb_lnkarg/3 @cnindex nb_linkarg/3 As @code{nb_setarg/3}, but like @code{nb_linkval/2} it does not duplicate @var{Value}. Use with extreme care and consult the documentation of @code{nb_linkval/2} before use. @item nb_current(?@var{Name}, ?@var{Value}) @findex nb_current/2 @snindex nb_current/2 @cnindex nb_current/2 Enumerate all defined variables with their value. The order of enumeration is undefined. @item nb_delete(+@var{Name}) @findex nb_delete/2 @snindex nb_delete/2 @cnindex nb_delete/2 Delete the named global variable. @end table Global variables have been introduced by various Prolog implementations recently. We follow the implementation of them in SWI-Prolog, itself based on hProlog by Bart Demoen. GNU-Prolog provides a rich set of global variables, including arrays. Arrays can be implemented easily in YAP and SWI-Prolog using @code{functor/3} and @code{setarg/3} due to the unrestricted arity of compound terms. @node Profiling, Call Counting, Global Variables, Top >>>>>>> 1.222 @section Profiling Prolog Programs @cindex profiling YAP includes two profilers. The count profiler keeps information on the number of times a predicate was called. This information can be used to detect what are the most commonly called predicates in the program. The count profiler can be compiled by setting YAP's flag @code{profiling} to @code{on}. The time-profiler is a @code{gprof} profiler, and counts how many ticks are being spent on specific predicates, or on other system functions such as internal data-base accesses or garbage collects. The YAP profiling sub-system is currently under development. Functionality for this sub-system will increase with newer implementation. @subsection The Count Profiler @strong{Notes:} The count profiler works by incrementing counters at procedure entry or backtracking. It provides exact information: @itemize @bullet @item Profiling works for both static and dynamic predicates. @item Currently only information on entries and retries to a predicate are maintained. This may change in the future. @item As an example, the following user-level program gives a list of the most often called procedures in a program. The procedure @code{list_profile} shows all procedures, irrespective of module, and the procedure @code{list_profile/1} shows the procedures being used in a specific module. @example list_profile :- % get number of calls for each profiled procedure setof(D-[M:P|D1],(current_module(M),profile_data(M:P,calls,D),profile_data(M:P,retries,D1)),LP), % output so that the most often called % predicates will come last: write_profile_data(LP). list_profile(Module) :- % get number of calls for each profiled procedure setof(D-[Module:P|D1],(profile_data(Module:P,calls,D),profile_data(Module:P,retries,D1)),LP), % output so that the most often called % predicates will come last: write_profile_data(LP). write_profile_data([]). write_profile_data([D-[M:P|R]|SLP]) :- % swap the two calls if you want the most often % called predicates first. format('~a:~w: ~32+~t~d~12+~t~d~12+~n', [M,P,D,R]), write_profile_data(SLP). @end example @end itemize These are the current predicates to access and clear profiling data: @table @code @item profile_data(?@var{Na/Ar}, ?@var{Parameter}, -@var{Data}) @findex profile_data/3 @snindex profile_data/3 @cnindex profile_data/3 Give current profile data on @var{Parameter} for a predicate described by the predicate indicator @var{Na/Ar}. If any of @var{Na/Ar} or @var{Parameter} are unbound, backtrack through all profiled predicates or stored parameters. Current parameters are: @table @code @item calls Number of times a procedure was called. @item retries Number of times a call to the procedure was backtracked to and retried. @end table @item profile_reset @findex profiled_reset/0 @snindex profiled_reset/0 @cnindex profiled_reset/0 Reset all profiling information. @end table @subsection Tick Profiler The tick profiler works by interrupting the Prolog code every so often and checking at each point the code was. The profiler must be able to retrace the state of the abstract machine at every moment. The major advantage of this approach is that it gives the actual amount of time being spent per procedure, or whether garbage collection dominates execution time. The major drawback is that tracking down the state of the abstract machine may take significant time, and in the worst case may slow down the whole execution. The following procedures are available: @table @code @item profinit @findex profinit/0 @snindex profinit/0 @cnindex profinit/0 Initialise the data-structures for the profiler. Unnecessary for dynamic profiler. @item profon @findex profon/0 @snindex profon/0 @cnindex profon/0 Start profiling. @item profoff @findex profoff/0 @snindex profoff/0 @cnindex profoff/0 Stop profiling. @item showprofres @findex showprofres/0 @snindex showprofres/0 @cnindex showprofres/0 Show profiling info. @item showprofres(@var{N}) @findex showprofres/1 @snindex showprofres/1 @cnindex showprofres/1 Show profiling info for the top-most @var{N} predicates. @end table @node Call Counting, Arrays, Profiling, Top @section Counting Calls @cindex Counting Calls Predicates compiled with YAP's flag @code{call_counting} set to @code{on} update counters on the numbers of calls and of retries. Counters are actually decreasing counters, so that they can be used as timers. Three counters are available: @itemize @bullet @item @code{calls}: number of predicate calls since execution started or since system was reset; @item @code{retries}: number of retries for predicates called since execution started or since counters were reset; @item @code{calls_and_retries}: count both on predicate calls and retries. @end itemize These counters can be used to find out how many calls a certain goal takes to execute. They can also be used as timers. The code for the call counters piggybacks on the profiling code. Therefore, activating the call counters also activates the profiling counters. These are the predicates that access and manipulate the call counters: @table @code @item call_count_data(-@var{Calls}, -@var{Retries}, -@var{CallsAndRetries}) @findex call_count_data/3 @snindex call_count_data/3 @cnindex call_count_data/3 Give current call count data. The first argument gives the current value for the @var{Calls} counter, next the @var{Retries} counter, and last the @var{CallsAndRetries} counter. @item call_count_reset @findex call_count_data/0 @snindex call_count_data/0 @cnindex call_count_data/0 Reset call count counters. All timers are also reset. @item call_count(?@var{CallsMax}, ?@var{RetriesMax}, ?@var{CallsAndRetriesMax}) @findex call_count_data/3 @snindex call_count_data/3 @cnindex call_count_data/3 Set call count counter as timers. YAP will generate an exception if one of the instantiated call counters decreases to 0. YAP will ignore unbound arguments: @itemize @bullet @item @var{CallsMax}: throw the exception @code{call_counter} when the counter @code{calls} reaches 0; @item @var{RetriesMax}: throw the exception @code{retry_counter} when the counter @code{retries} reaches 0; @item @var{CallsAndRetriesMax}: throw the exception @code{call_and_retry_counter} when the counter @code{calls_and_retries} reaches 0. @end itemize @end table Next, we show a simple example of how to use call counters: @example ?- yap_flag(call_counting,on), [-user]. l :- l. end_of_file. yap_flag(call_counting,off). yes yes ?- catch((call_count(10000,_,_),l),call_counter,format("limit_exceeded.~n",[])). limit_exceeded. yes @end example Notice that we first compile the looping predicate @code{l/0} with @code{call_counting} @code{on}. Next, we @code{catch/3} to handle an exception when @code{l/0} performs more than 10000 reductions. @node Arrays, Preds, Call Counting , Top @section Arrays The YAP system includes experimental support for arrays. The support is enabled with the option @code{YAP_ARRAYS}. There are two very distinct forms of arrays in YAP. The @emph{dynamic arrays} are a different way to access compound terms created during the execution. Like any other terms, any bindings to these terms and eventually the terms themselves will be destroyed during backtracking. Our goal in supporting dynamic arrays is twofold. First, they provide an alternative to the standard @code{arg/3} built-in. Second, because dynamic arrays may have name that are globally visible, a dynamic array can be visible from any point in the program. In more detail, the clause @example g(X) :- array_element(a,2,X). @end example will succeed as long as the programmer has used the built-in @t{array/2} to create an array term with at least 3 elements in the current environment, and the array was associated with the name @code{a}. The element @code{X} is a Prolog term, so one can bind it and any such bindings will be undone when backtracking. Note that dynamic arrays do not have a type: each element may be any Prolog term. The @emph{static arrays} are an extension of the database. They provide a compact way for manipulating data-structures formed by characters, integers, or floats imperatively. They can also be used to provide two-way communication between YAP and external programs through shared memory. In order to efficiently manage space elements in a static array must have a type. Currently, elements of static arrays in YAP should have one of the following predefined types: @itemize @bullet @item @code{byte}: an 8-bit signed character. @item @code{unsigned_byte}: an 8-bit unsigned character. @item @code{int}: Prolog integers. Size would be the natural size for the machine's architecture. @item @code{float}: Prolog floating point number. Size would be equivalent to a double in @code{C}. @item @code{atom}: a Prolog atom. @item @code{dbref}: an internal database reference. @item @code{term}: a generic Prolog term. Note that this will term will not be stored in the array itself, but instead will be stored in the Prolog internal database. @end itemize Arrays may be @emph{named} or @emph{anonymous}. Most arrays will be @emph{named}, that is associated with an atom that will be used to find the array. Anonymous arrays do not have a name, and they are only of interest if the @code{TERM_EXTENSIONS} compilation flag is enabled. In this case, the unification and parser are extended to replace occurrences of Prolog terms of the form @code{X[I]} by run-time calls to @code{array_element/3}, so that one can use array references instead of extra calls to @code{arg/3}. As an example: @example g(X,Y,Z,I,J) :- X[I] is Y[J]+Z[I]. @end example should give the same results as: @example G(X,Y,Z,I,J) :- array_element(X,I,E1), array_element(Y,J,E2), array_element(Z,I,E3), E1 is E2+E3. @end example Note that the only limitation on array size are the stack size for dynamic arrays; and, the heap size for static (not memory mapped) arrays. Memory mapped arrays are limited by available space in the file system and in the virtual memory space. The following predicates manipulate arrays: @table @code @item array(+@var{Name}, +@var{Size}) @findex array/2 @snindex array/2 @cnindex array/2 Creates a new dynamic array. The @var{Size} must evaluate to an integer. The @var{Name} may be either an atom (named array) or an unbound variable (anonymous array). Dynamic arrays work as standard compound terms, hence space for the array is recovered automatically on backtracking. @item static_array(+@var{Name}, +@var{Size}, +@var{Type}) @findex static_array/3 @snindex static_array/3 @cnindex static_array/3 Create a new static array with name @var{Name}. Note that the @var{Name} must be an atom (named array). The @var{Size} must evaluate to an integer. The @var{Type} must be bound to one of types mentioned previously. @item reset_static_array(+@var{Name}) @findex reset_static_array/1 @snindex reset_static_array/1 @cnindex reset_static_array/1 Reset static array with name @var{Name} to its initial value. @item static_array_location(+@var{Name}, -@var{Ptr}) @findex static_array_location/4 @snindex static_array_location/4 @cnindex static_array_location/4 Give the location for a static array with name @var{Name}. @item static_array_properties(?@var{Name}, ?@var{Size}, ?@var{Type}) @findex static_array_properties/3 @snindex static_array_properties/3 @cnindex static_array_properties/3 Show the properties size and type of a static array with name @var{Name}. Can also be used to enumerate all current static arrays. This built-in will silently fail if the there is no static array with that name. @item static_array_to_term(?@var{Name}, ?@var{Term}) @findex static_array_to_term/3 @snindex static_array_to_term/3 @cnindex static_array_to_term/3 Convert a static array with name @var{Name} to a compound term of name @var{Name}. This built-in will silently fail if the there is no static array with that name. @item mmapped_array(+@var{Name}, +@var{Size}, +@var{Type}, +@var{File}) @findex static_array/3 @snindex static_array/3 @cnindex static_array/3 Similar to @code{static_array/3}, but the array is memory mapped to file @var{File}. This means that the array is initialized from the file, and that any changes to the array will also be stored in the file. This built-in is only available in operating systems that support the system call @code{mmap}. Moreover, mmapped arrays do not store generic terms (type @code{term}). @item close_static_array(+@var{Name}) @findex close_static_array/1 @snindex close_static_array/1 @cnindex close_static_array/1 Close an existing static array of name @var{Name}. The @var{Name} must be an atom (named array). Space for the array will be recovered and further accesses to the array will return an error. @item resize_static_array(+@var{Name}, -@var{OldSize}, +@var{NewSize}) @findex resize_static_array/3 @snindex resize_static_array/3 @cnindex resize_static_array/3 Expand or reduce a static array, The @var{Size} must evaluate to an integer. The @var{Name} must be an atom (named array). The @var{Type} must be bound to one of @code{int}, @code{dbref}, @code{float} or @code{atom}. Note that if the array is a mmapped array the size of the mmapped file will be actually adjusted to correspond to the size of the array. @item array_element(+@var{Name}, +@var{Index}, ?@var{Element}) @findex array_element/3 @snindex array_element/3 @cnindex array_element/3 Unify @var{Element} with @var{Name}[@var{Index}]. It works for both static and dynamic arrays, but it is read-only for static arrays, while it can be used to unify with an element of a dynamic array. @item update_array(+@var{Name}, +@var{Index}, ?@var{Value}) @findex update_array/3 @snindex update_array/3 @cnindex update_array/3 Attribute value @var{Value} to @var{Name}[@var{Index}]. Type restrictions must be respected for static arrays. This operation is available for dynamic arrays if @code{MULTI_ASSIGNMENT_VARIABLES} is enabled (true by default). Backtracking undoes @var{update_array/3} for dynamic arrays, but not for static arrays. Note that @code{update_array/3} actually uses @code{setarg/3} to update elements of dynamic arrays, and @code{setarg/3} spends an extra cell for every update. For intensive operations we suggest it may be less expensive to unify each element of the array with a mutable terms and to use the operations on mutable terms. @item add_to_array_element(+@var{Name}, +@var{Index}, , +@var{Number}, ?@var{NewValue}) @findex add_to_array_element/4 @snindex add_to_array_element/4 @cnindex add_to_array_element/4 Add @var{Number} @var{Name}[@var{Index}] and unify @var{NewValue} with the incremented value. Observe that @var{Name}[@var{Index}] must be an number. If @var{Name} is a static array the type of the array must be @code{int} or @code{float}. If the type of the array is @code{int} you only may add integers, if it is @code{float} you may add integers or floats. If @var{Name} corresponds to a dynamic array the array element must have been previously bound to a number and @code{Number} can be any kind of number. The @code{add_to_array_element/3} built-in actually uses @code{setarg/3} to update elements of dynamic arrays. For intensive operations we suggest it may be less expensive to unify each element of the array with a mutable terms and to use the operations on mutable terms. @end table @node Preds, Misc, Arrays, Top @section Predicate Information Built-ins that return information on the current predicates and modules: @table @code @c ......... begin of 'module' documentation ......... @item current_module(@var{M}) @findex current_module/1 @syindex current_module/1 @cnindex current_module/1 Succeeds if @var{M} are defined modules. A module is defined as soon as some predicate defined in the module is loaded, as soon as a goal in the module is called, or as soon as it becomes the current type-in module. @item current_module(@var{M},@var{F}) @findex current_module/2 @syindex current_module/2 @cnindex current_module/2 Succeeds if @var{M} are current modules associated to the file @var{F}. @c .......... end of 'module' documentation .......... @end table @node Misc, , Preds, Top @section Miscellaneous @table @code @item statistics/0 @findex statistics/0 @saindex statistics/0 @cyindex statistics/0 Send to the current user error stream general information on space used and time spent by the system. @example ?- statistics. memory (total) 4784124 bytes program space 3055616 bytes: 1392224 in use, 1663392 free 2228132 max stack space 1531904 bytes: 464 in use, 1531440 free global stack: 96 in use, 616684 max local stack: 368 in use, 546208 max trail stack 196604 bytes: 8 in use, 196596 free 0.010 sec. for 5 code, 2 stack, and 1 trail space overflows 0.130 sec. for 3 garbage collections which collected 421000 bytes 0.000 sec. for 0 atom garbage collections which collected 0 bytes 0.880 sec. runtime 1.020 sec. cputime 25.055 sec. elapsed time @end example The example shows how much memory the system spends. Memory is divided into Program Space, Stack Space and Trail. In the example we have 3MB allocated for program spaces, with less than half being actually used. YAP also shows the maximum amount of heap space having been used which was over 2MB. The stack space is divided into two stacks which grow against each other. We are in the top level so very little stack is being used. On the other hand, the system did use a lot of global and local stack during the previous execution (we refer the reader to a WAM tutorial in order to understand what are the global and local stacks). YAP also shows information on how many memory overflows and garbage collections the system executed, and statistics on total execution time. Cputime includes all running time, runtime excludes garbage collection and stack overflow time. @item statistics(?@var{Param},-@var{Info}) @findex statistics/2 @saindex statistics/2 @cnindex statistics/2 Gives statistical information on the system parameter given by first argument: @table @code @item cputime @findex cputime (statistics/2 option) @code{[@var{Time since Boot},@var{Time From Last Call to Cputime}]} @* This gives the total cputime in milliseconds spent executing Prolog code, garbage collection and stack shifts time included. @item garbage_collection @findex garbage_collection (statistics/2 option) @code{[@var{Number of GCs},@var{Total Global Recovered},@var{Total Time Spent}]} @* Number of garbage collections, amount of space recovered in kbytes, and total time spent doing garbage collection in milliseconds. More detailed information is available using @code{yap_flag(gc_trace,verbose)}. @item global_stack @findex global_stack (statistics/2 option) @code{[@var{Global Stack Used},@var{Execution Stack Free}]} @* Space in kbytes currently used in the global stack, and space available for expansion by the local and global stacks. @item local_stack @findex local_stack (statistics/2 option) @code{[@var{Local Stack Used},@var{Execution Stack Free}]} @* Space in kbytes currently used in the local stack, and space available for expansion by the local and global stacks. @item heap @findex heap (statistics/2 option) @code{[@var{Heap Used},@var{Heap Free}]} @* Total space in kbytes not recoverable in backtracking. It includes the program code, internal data base, and, atom symbol table. @item program @findex program (statistics/2 option) @code{[@var{Program Space Used},@var{Program Space Free}]} @* Equivalent to @code{heap}. @item runtime @findex runtime (statistics/2 option) @code{[@var{Time since Boot},@var{Time From Last Call to Runtime}]} @* This gives the total cputime in milliseconds spent executing Prolog code, not including garbage collections and stack shifts. Note that until YAP4.1.2 the @code{runtime} statistics would return time spent on garbage collection and stack shifting. @item stack_shifts @findex stack_shifts (stack_shifts/3 option) @code{[@var{Number of Heap Shifts},@var{Number of Stack Shifts},@var{Number of Trail Shifts}]} @* Number of times YAP had to expand the heap, the stacks, or the trail. More detailed information is available using @code{yap_flag(gc_trace,verbose)}. @item trail @findex trail (statistics/2 option) @code{[@var{Trail Used},@var{Trail Free}]} @* Space in kbytes currently being used and still available for the trail. @item walltime @findex walltime (statistics/2 option) @code{[@var{Time since Boot},@var{Time From Last Call to Walltime}]} @* This gives the clock time in milliseconds since starting Prolog. @end table @item time(:@var{Goal}) @findex time/1 @snindex time/1 @cnindex time/1 Prints the CPU time and the wall time for the execution of @var{Goal}. Possible choice-points of @var{Goal} are removed. Based on the SWI-Prolog definition (minus reporting the number of inferences, which YAP currently does not support). @item yap_flag(?@var{Param},?@var{Value}) @findex yap_flag/2 @snindex yap_flag/2 @cnindex yap_flag/2 Set or read system properties for @var{Param}: @table @code @item argv @findex argv (yap_flag/2 option) @* Read-only flag. It unifies with a list of atoms that gives the arguments to YAP after @code{--}. @item bounded [ISO] @findex bounded (yap_flag/2 option) @* Read-only flag telling whether integers are bounded. The value depends on whether YAP uses the GMP library or not. @item profiling @findex call_counting (yap_flag/2 option) @* If @code{off} (default) do not compile call counting information for procedures. If @code{on} compile predicates so that they calls and retries to the predicate may be counted. Profiling data can be read through the @code{call_count_data/3} built-in. @item char_conversion [ISO] @findex char_conversion (yap_flag/2 option) @* Writable flag telling whether a character conversion table is used when reading terms. The default value for this flag is @code{off} except in @code{sicstus} and @code{iso} language modes, where it is @code{on}. @item character_escapes [ISO] @findex character_escapes (yap_flag/2 option) @* Writable flag telling whether a character escapes are enables, @code{on}, or disabled, @code{off}. The default value for this flag is @code{on}. @c You can also use @code{cprolog} mode, which corresponds to @code{off}, @c @code{iso} mode, which corresponds to @code{on}, and @code{sicstus} @c mode, which corresponds to the mode traditionally used in SICStus @c Prolog. In this mode back-quoted escape sequences should not close with @c a backquote and unrecognized escape codes do not result in error. @item debug [ISO] @findex debug (yap_flag/2 option) @* If @var{Value} is unbound, tell whether debugging is @code{on} or @code{off}. If @var{Value} is bound to @code{on} enable debugging, and if it is bound to @code{off} disable debugging. +@item debugger_print_options @findex debugger_print_options (yap_flag/2 option) @* If bound, set the argument to the @code{write_term/3} options the debugger uses to write terms. If unbound, show the current options. @item dialect @findex dialect (yap_flag/2 option) @* Read-only flag that always returns @code{yap}. @item discontiguous_warnings @findex discontiguous_warnings (yap_flag/2 option) @* If @var{Value} is unbound, tell whether warnings for discontiguous predicates are @code{on} or @code{off}. If @var{Value} is bound to @code{on} enable these warnings, and if it is bound to @code{off} disable them. The default for YAP is @code{off}, unless we are in @code{sicstus} or @code{iso} mode. @item dollar_as_lower_case @findex dollar_as_lower_case (yap_flag/2 option) @* If @code{off} (default) consider the character '$' a control character, if @code{on} consider '$' a lower case character. @item double_quotes [ISO] @findex double_quotes (yap_flag/2 option) @* If @var{Value} is unbound, tell whether a double quoted list of characters token is converted to a list of atoms, @code{chars}, to a list of integers, @code{codes}, or to a single atom, @code{atom}. If @var{Value} is bound, set to the corresponding behavior. The default value is @code{codes}. @item fast @findex fast (yap_flag/2 option) @* If @code{on} allow fast machine code, if @code{off} (default) disable it. Only available in experimental implementations. @item fileerrors @findex fileerrors (yap_flag/2 option) @* If @code{on} @code{fileerrors} is @code{on}, if @code{off} (default) @code{fileerrors} is disabled. @item float_format @findex float_format (yap_flag/2 option) @* C-library @code{printf()} format specification used by @code{write/1} and friends to determine how floating point numbers are printed. The default is @code{%.15g}. The specified value is passed to @code{printf()} without further checking. For example, if you want less digits printed, @code{%g} will print all floats using 6 digits instead of the default 15. @item gc @findex gc (yap_flag/2 option) @* If @code{on} allow garbage collection (default), if @code{off} disable it. @item gc_margin @findex gc_margin (yap_flag/2 option) @* Set or show the minimum free stack before starting garbage collection. The default depends on total stack size. @item gc_trace @findex gc_trace (yap_flag/2 option) @* If @code{off} (default) do not show information on garbage collection and stack shifts, if @code{on} inform when a garbage collection or stack shift happened, if @code{verbose} give detailed information on garbage collection and stack shifts. Last, if @code{very_verbose} give detailed information on data-structures found during the garbage collection process, namely, on choice-points. @item generate_debugging_info @findex generate_debugging_info (yap_flag/2 option) @* If @code{true} (default) generate debugging information for procedures, including source mode. If @code{false} predicates no information is generated, although debugging is still possible, and source mode is disabled. @item host_type @findex host_type (yap_flag/2 option) @* Return @code{configure} system information, including the machine-id for which YAP was compiled and Operating System information. @item index @findex index (yap_flag/2 option) @* If @code{on} allow indexing (default), if @code{off} disable it. @item informational_messages @findex informational_messages (yap_flag/2 option) @* If @code{on} allow printing of informational messages, such as the ones that are printed when consulting. If @code{off} disable printing these messages. It is @code{on} by default except if YAP is booted with the @code{-L} flag. @item integer_rounding_function [ISO] @findex integer_rounding_function (yap_flag/2 option) @* Read-only flag telling the rounding function used for integers. Takes the value @code{down} for the current version of YAP. @item language @findex language (yap_flag/2 option) @* Choose whether YAP is closer to C-Prolog, @code{cprolog}, iso-prolog, @code{iso} or SICStus Prolog, @code{sicstus}. The current default is @code{cprolog}. This flag affects update semantics, leashing mode, style checking, handling calls to undefined procedures, how directives are interpreted, when to use dynamic, character escapes, and how files are consulted. @item max_arity [ISO] @findex max_arity (yap_flag/2 option) @* Read-only flag telling the maximum arity of a functor. Takes the value @code{unbounded} for the current version of YAP. @item max_integer [ISO] @findex max_integer (yap_flag/2 option) @* Read-only flag telling the maximum integer in the implementation. Depends on machine and Operating System architecture, and on whether YAP uses the @code{GMP} multi-precision library. If @code{bounded} is false, requests for @code{max_integer} will fail. @item max_tagged_integer @findex max_tagged_integer (yap_flag/2 option) @* Read-only flag telling the maximum integer we can store as a single word. Depends on machine and Operating System architecture. It can be used to find the word size of the current machine. @item min_integer [ISO] @findex min_integer (yap_flag/2 option) @* Read-only flag telling the minimum integer in the implementation. Depends on machine and Operating System architecture, and on whether YAP uses the @code{GMP} multi-precision library. If @code{bounded} is false, requests for @code{min_integer} will fail. @item min_tagged_integer @findex max_tagged_integer (yap_flag/2 option) @* Read-only flag telling the minimum integer we can store as a single word. Depends on machine and Operating System architecture. @item n_of_integer_keys_in_bb @findex n_of_integer_keys_in_bb (yap_flag/2 option) @* Read or set the size of the hash table that is used for looking up the blackboard when the key is an integer. @item n_of_integer_keys_in_db @findex n_of_integer_keys_in_db (yap_flag/2 option) @* Read or set the size of the hash table that is used for looking up the internal data-base when the key is an integer. @item open_expands_filename @findex open_expands_filename (yap_flag/2 option) @* If @code{true} the @code{open/3} builtin performs filename-expansion before opening a file (SICStus Prolog like). If @code{false} it does not (SWI-Prolog like). @item profiling @findex profiling (yap_flag/2 option) @* If @code{off} (default) do not compile profiling information for procedures. If @code{on} compile predicates so that they will output profiling information. Profiling data can be read through the @code{profile_data/3} built-in. @item redefine_warnings @findex discontiguous_warnings (yap_flag/2 option) @* If @var{Value} is unbound, tell whether warnings for procedures defined in several different files are @code{on} or @code{off}. If @var{Value} is bound to @code{on} enable these warnings, and if it is bound to @code{off} disable them. The default for YAP is @code{off}, unless we are in @code{sicstus} or @code{iso} mode. @item shared_object_search_path @findex shared_object_search_path (yap_flag/2 option) Name of the environment variable used by the system to search for shared objects. @item single_var_warnings @findex single_var_warnings (yap_flag/2 option) @* If @var{Value} is unbound, tell whether warnings for singleton variables are @code{on} or @code{off}. If @var{Value} is bound to @code{on} enable these warnings, and if it is bound to @code{off} disable them. The default for YAP is @code{off}, unless we are in @code{sicstus} or @code{iso} mode. @item strict_iso @findex strict_iso (yap_flag/2 option) @* If @var{Value} is unbound, tell whether strict ISO compatibility mode is @code{on} or @code{off}. If @var{Value} is bound to @code{on} set language mode to @code{iso} and enable strict mode. If @var{Value} is bound to @code{off} disable strict mode, and keep the current language mode. The default for YAP is @code{off}. Under strict ISO prolog mode all calls to non-ISO built-ins generate an error. Compilation of clauses that would call non-ISO built-ins will also generate errors. Pre-processing for grammar rules is also disabled. Module expansion is still performed. Arguably, ISO Prolog does not provide all the functionality required from a modern Prolog system. Moreover, because most Prolog implementations do not fully implement the standard and because the standard itself gives the implementor latitude in a few important questions, such as the unification algorithm and maximum size for numbers there is not guarantee that programs compliant with this mode will work the same way in every Prolog and in every platform. We thus believe this mode is mostly useful when investigating how a program depends on a Prolog's platform specific features. @item stack_dump_on_error @findex stack_dump_on_error (yap_flag/2 option) @* If @code{on} show a stack dump when YAP finds an error. The default is @code{off}. @item syntax_errors @findex syntax_errors (yap_flag/2 option) @* Control action to be taken after syntax errors while executing @code{read/1}, @code{read/2}, or @code{read_term/3}: @table @code @item dec10 @* Report the syntax error and retry reading the term. @item fail @* Report the syntax error and fail (default). @item error @* Report the syntax error and generate an error. @item quiet @* Just fail @end table @item system_options @findex system_options (yap_flag/2 option) @* This read only flag tells which options were used to compile YAP. Currently it informs whether the system supports @code{big_numbers}, @code{coroutining}, @code{depth_limit}, @code{low_level_tracer}, @code{or-parallelism}, @code{rational_trees}, @code{readline}, @code{tabling}, @code{threads}, or the @code{wam_profiler}. @item tabling_mode @* Sets or reads the tabling mode for all tabled predicates. Please @pxref{Tabling} for the list of options. @item to_chars_mode @findex to_chars_modes (yap_flag/2 option) @* Define whether YAP should follow @code{quintus}-like semantics for the @code{atom_chars/1} or @code{number_chars/1} built-in, or whether it should follow the ISO standard (@code{iso} option). +@item toplevel_hook @findex toplevel_hook (yap_flag/2 option) @* +If bound, set the argument to a goal to be executed before entering the top-level. If unbound show the current goal or @code{true} if none is presented. Only the first solution is considered and the goal is not backtracked into. +@item toplevel_print_options @findex toplevel_print_options (yap_flag/2 option) @* +If bound, set the argument to the @code{write_term/3} options used to write terms from the top-level. If unbound, show the current options. @item typein_module @findex typein_module (yap_flag/2 option) @* If bound, set the current working or type-in module to the argument, which must be an atom. If unbound, unify the argument with the current working module. @item unix @findex unix (yap_flag/2 option) @* Read-only boolean flag that unifies with tr @code{true} if YAP is running on an Unix system. Defined if the C-compiler used to compile this version of YAP either defines @code{__unix__} or @code{unix}. @item unknown [ISO] @findex unknown (yap_flag/2 option) @* Corresponds to calling the @code{unknown/2} built-in. @item update_semantics @findex update_semantics (yap_flag/2 option) @* Define whether YAP should follow @code{immediate} update semantics, as in C-Prolog (default), @code{logical} update semantics, as in Quintus Prolog, SICStus Prolog, or in the ISO standard. There is also an intermediate mode, @code{logical_assert}, where dynamic procedures follow logical semantics but the internal data base still follows immediate semantics. @item user_error @findex user_error (yap_flag/2 option) @* If the second argument is bound to a stream, set @code{user_error} to this stream. If the second argument is unbound, unify the argument with the current @code{user_error} stream. By default, the @code{user_error} stream is set to a stream corresponding to the Unix @code{stderr} stream. The next example shows how to use this flag: @example ?- open( '/dev/null', append, Error, [alias(mauri_tripa)] ). Error = '$stream'(3) ? ; no ?- set_prolog_flag(user_error, mauri_tripa). close(mauri_tripa). yes ?- @end example We execute three commands. First, we open a stream in write mode and give it an alias, in this case @code{mauri_tripa}. Next, we set @code{user_error} to the stream via the alias. Note that after we did so prompts from the system were redirected to the stream @code{mauri_tripa}. Last, we close the stream. At this point, YAP automatically redirects the @code{user_error} alias to the original @code{stderr}. @item user_input @findex user_input (yap_flag/2 option) @* If the second argument is bound to a stream, set @code{user_input} to this stream. If the second argument is unbound, unify the argument with the current @code{user_input} stream. By default, the @code{user_input} stream is set to a stream corresponding to the Unix @code{stdin} stream. @item user_output @findex user_output (yap_flag/2 option) @* If the second argument is bound to a stream, set @code{user_output} to this stream. If the second argument is unbound, unify the argument with the current @code{user_output} stream. By default, the @code{user_output} stream is set to a stream corresponding to the Unix @code{stdout} stream. @item verbose @findex verbose (yap_flag/2 option) @* If @code{normal} allow printing of informational and banner messages, such as the ones that are printed when consulting. If @code{silent} disable printing these messages. It is @code{normal} by default except if YAP is booted with the @code{-q} or @code{-L} flag. @item verbose_load @findex verbose_load (yap_flag/2 option) @* If @code{true} allow printing of informational messages when consulting files. If @code{false} disable printing these messages. It is @code{normal} by default except if YAP is booted with the @code{-L} flag. @item version @findex version (yap_flag/2 option) @* Read-only flag that returns an atom with the current version of YAP. @item version_data @findex version_data (yap_flag/2 option) @* Read-only flag that reads a term of the form @code{yap}(@var{Major},@var{Minor},@var{Patch},@var{Undefined}), where @var{Major} is the major version, @var{Minor} is the minor version, and @var{Patch} is the patch number. @item windows @findex windoes (yap_flag/2 option) @* Read-only boolean flag that unifies with tr @code{true} if YAP is running on an Windows machine. @item write_strings @findex write_strings (yap_flag/2 option) @* Writable flag telling whether the system should write lists of integers that are writable character codes using the list notation. It is @code{on} if enables or @code{off} if disabled. The default value for this flag is @code{off}. @item max_workers @findex max_workers (yap_flag/2 option) @* Read-only flag telling the maximum number of parallel processes. @item max_threads @findex max_threads (yap_flag/2 option) @* Read-only flag telling the maximum number of Prolog threads that can be created. @end table @item current_prolog_flag(?@var{Flag},-@var{Value}) [ISO] @findex current_prolog_flag/2 @snindex current_prolog_flag/2 @cnindex current_prolog_flag/2 Obtain the value for a YAP Prolog flag. Equivalent to calling @code{yap_flag/2} with the second argument unbound, and unifying the returned second argument with @var{Value}. @item prolog_flag(?@var{Flag},-@var{OldValue},+@var{NewValue}) @findex prolog_flag/3 @syindex prolog_flag/3 @cnindex prolog_flag/3 Obtain the value for a YAP Prolog flag and then set it to a new value. Equivalent to first calling @code{current_prolog_flag/2} with the second argument @var{OldValue} unbound and then calling @code{set_prolog_flag/2} with the third argument @var{NewValue}. @item set_prolog_flag(+@var{Flag},+@var{Value}) [ISO] @findex set_prolog_flag/2 @snindex set_prolog_flag/2 @cnindex set_prolog_flag/2 Set the value for YAP Prolog flag @code{Flag}. Equivalent to calling @code{yap_flag/2} with both arguments bound. @item op(+@var{P},+@var{T},+@var{A}) [ISO] @findex op/3 @syindex op/3 @cyindex op/3 Defines the operator @var{A} or the list of operators @var{A} with type @var{T} (which must be one of @code{xfx}, @code{xfy},@code{yfx}, @code{xf}, @code{yf}, @code{fx} or @code{fy}) and precedence @var{P} (see appendix iv for a list of predefined operators). Note that if there is a preexisting operator with the same name and type, this operator will be discarded. Also, @code{','} may not be defined as an operator, and it is not allowed to have the same for an infix and a postfix operator. @item current_op(@var{P},@var{T},@var{F}) [ISO] @findex current_op/3 @syindex current_op/3 @cnindex current_op/3 Defines the relation: @var{P} is a currently defined operator of type @var{T} and precedence @var{P}. @item prompt(-@var{A},+@var{B}) @findex prompt/2 @syindex prompt/2 @cyindex prompt/2 Changes YAP input prompt from @var{A} to @var{B}. @item initialization @findex initialization/0 @syindex initialization/0 @cnindex initialization/0 Execute the goals defined by initialization/1. Only the first answer is considered. @item prolog_initialization(@var{G}) @findex prolog_initialization/1 @saindex prolog_initialization/1 @cnindex prolog_initialization/1 Add a goal to be executed on system initialization. This is compatible with SICStus Prolog's @code{initialization/1}. @item version @findex version/0 @saindex version/0 @cnindex version/0 Write YAP's boot message. @item version(-@var{Message}) @findex version/1 @syindex version/1 @cnindex version/1 Add a message to be written when yap boots or after aborting. It is not possible to remove messages. @item prolog_load_context(?@var{Key}, ?@var{Value}) @findex prolog_load_context/2 @syindex prolog_load_context/2 @cnindex prolog_load_context/2 Obtain information on what is going on in the compilation process. The following keys are available: @table @code @item directory @findex directory (prolog_load_context/2 option) @* Full name for the directory where YAP is currently consulting the file. @item file @findex file (prolog_load_context/2 option) @* Full name for the file currently being consulted. Notice that included filed are ignored. @item module @findex module (prolog_load_context/2 option) @* Current source module. @item source @findex file (prolog_load_context/2 option) @* Full name for the file currently being read in, which may be consulted, reconsulted, or included. @item stream @findex file (prolog_load_context/2 option) @* Stream currently being read in. @item term_position @findex file (prolog_load_context/2 option) @* Stream position at the stream currently being read in. @end table @end table @node Library, SWI-Prolog, Built-ins, Top @chapter Library Predicates Library files reside in the library_directory path (set by the @code{LIBDIR} variable in the Makefile for YAP). Currently, most files in the library are from the Edinburgh Prolog library. @menu Library, Extensions, Built-ins, Top * Apply:: SWI-Compatible Apply library. * Apply Macros:: Apply a Predicate to a list or to sub-terms. * Association Lists:: Binary Tree Implementation of Association Lists. * AVL Trees:: Predicates to add and lookup balanced binary trees. * Cleanup:: Call With registered Cleanup Calls * DGraphs:: Directed Graphs Implemented With Red-Black Trees * Heaps:: Labelled binary tree where the key of each node is less than or equal to the keys of its children. * LAM:: LAM MPI * Lists:: List Manipulation * matrix:: Matrix Objects * MATLAB:: Matlab Interface * Non-Backtrackable Data Structures:: Queues, Heaps, and Beams. * Ordered Sets:: Ordered Set Manipulation * Pseudo Random:: Pseudo Random Numbers * Queues:: Queue Manipulation * Random:: Random Numbers * Read Utilities:: SWI inspired utilities for fast stream scanning. * Red-Black Trees:: Predicates to add, lookup and delete in red-black binary trees. * RegExp:: Regular Expression Manipulation * Splay Trees:: Splay Trees * String I/O:: Writing To and Reading From Strings * System:: System Utilities * Terms:: Utilities on Terms * Timeout:: Call With Timeout * Trees:: Updatable Binary Trees * Tries:: Trie Data Structure * UGraphs:: Unweighted Graphs * UnDGraphs:: Undirected Graphs Using DGraphs @end menu @node Apply, Apply Macros, , Library @section Apply Macros @cindex macros This library provides a SWI-compatible set of utilities for applying a predicate to all elements of a list. The library just forwards definitions from the @code{apply_macros} library. @node Apply Macros, Association Lists, Apply, Library @section Apply Macros @cindex macros This library provides a set of utilities for applying a predicate to all elements of a list or to all sub-terms of a term. They allow to easily perform the most common do-loop constructs in Prolog. To avoid performance degradation due to apply/2, each call creates an equivalent Prolog program, without meta-calls, which is executed by the Prolog engine instead. Note that if the equivalent Prolog program already exists, it will be simply used. The library is based on code by Joachim Schimpf. The following routines are available once included with the @code{use_module(library(apply_macros))} command. @table @code @item maplist(+@var{Pred}, ?@var{ListIn}, ?@var{ListOut}) @findex maplist/3 @snindex maplist/3 @cnindex maplist/3 Creates @var{ListOut} by applying the predicate @var{Pred} to all elements of @var{ListIn}. @item checklist(+@var{Pred}, +@var{List}) @findex checklist/2 @snindex checklist/2 @cnindex checklist/2 Succeeds if the predicate @var{Pred} succeeds on all elements of @var{List}. @item selectlist(+@var{Pred}, +@var{ListIn}, ?@var{ListOut}) @findex selectlist/3 @snindex selectlist/3 @cnindex selectlist/3 Creates @var{ListOut} of all list elements of @var{ListIn} that pass a given test @item convlist(+@var{Pred}, +@var{ListIn}, ?@var{ListOut}) @findex convlist/3 @snindex convlist/3 @cnindex convlist/3 A combination of @code{maplist} and @code{selectlist}: creates @var{ListOut} by applying the predicate @var{Pred} to all list elements on which @var{Pred} succeeds @item sumlist(+@var{Pred}, +@var{List}, ?@var{AccIn}, ?@var{AccOut}) @findex sumlist/4 @snindex sumlist/4 @cnindex sumlist/4 Calls @var{Pred} on all elements of List and collects a result in @var{Accumulator}. @item mapargs(+@var{Pred}, ?@var{TermIn}, ?@var{TermOut}) @findex mapargs/3 @snindex mapargs/3 @cnindex mapargs/3 Creates @var{TermOut} by applying the predicate @var{Pred} to all arguments of @var{TermIn} @item sumargs(+@var{Pred}, +@var{Term}, ?@var{AccIn}, ?@var{AccOut}) @findex sumargs/4 @snindex sumargs/4 @cnindex sumargs/4 Calls the predicate @var{Pred} on all arguments of @var{Term} and collects a result in @var{Accumulator} @item mapnodes(+@var{Pred}, +@var{TermIn}, ?@var{TermOut}) @findex mapnodes/3 @snindex mapnodes/3 @cnindex mapnodes/3 Creates @var{TermOut} by applying the predicate @var{Pred} to all sub-terms of @var{TermIn} (depth-first and left-to-right order) @item checknodes(+@var{Pred}, +@var{Term}) @findex checknodes/3 @snindex checknodes/3 @cnindex checknodes/3 Succeeds if the predicate @var{Pred} succeeds on all sub-terms of @var{Term} (depth-first and left-to-right order) @item sumnodes(+@var{Pred}, +@var{Term}, ?@var{AccIn}, ?@var{AccOut}) @findex sumnodes/4 @snindex sumnodes/4 @cnindex sumnodes/4 Calls the predicate @var{Pred} on all sub-terms of @var{Term} and collect a result in @var{Accumulator} (depth-first and left-to-right order) @item include(+@var{Pred}, +@var{ListIn}, ?@var{ListOut}) @findex include/3 @snindex include/3 @cnindex include/3 Same as @code{selectlist/3}. @item exclude(+@var{Goal}, +@var{List1}, ?@var{List2}) @findex exclude/3 @snindex exclude/3 @cnindex exclude/3 Filter elements for which @var{Goal} fails. True if @var{List2} contains those elements @var{Xi} of @var{List1} for which @code{call(Goal, Xi)} fails. @item partition(+@var{Pred}, +@var{List1}, ?@var{Included}, ?@var{Excluded}) @findex partition/4 @snindex partition/4 @cnindex partition/4 Filter elements of @var{List} according to @var{Pred}. True if @var{Included} contains all elements for which @code{call(Pred, X)} succeeds and @var{Excluded} contains the remaining elements. @item partition(+@var{Pred}, +@var{List1}, ?@var{Lesser}, ?@var{Equal}, ?@var{Greater}) @findex partition/5 @snindex partition/5 @cnindex partition/5 Filter list according to @var{Pred} in three sets. For each element @var{Xi} of @var{List}, its destination is determined by @code{call(Pred, Xi, Place)}, where @var{Place} must be unified to one of @code{<}, @code{=} or @code{>}. @code{Pred} must be deterministic. @end table Examples: @example %given plus(X,Y,Z) :- Z is X + Y. plus_if_pos(X,Y,Z) :- Y > 0, Z is X + Y. vars(X, Y, [X|Y]) :- var(X), !. vars(_, Y, Y). trans(TermIn, TermOut) :- (compound(TermIn) ; atom(TermIn)), TermIn =.. [p|Args], TermOut =..[q|Args], !. trans(X,X). %success maplist(plus(1), [1,2,3,4], [2,3,4,5]). checklist(var, [X,Y,Z]). selectlist(<(0), [-1,0,1], [1]). convlist(plus_if_pos(1), [-1,0,1], [2]). sumlist(plus, [1,2,3,4], 1, 11). mapargs(number_atom,s(1,2,3), s('1','2','3')). sumargs(vars, s(1,X,2,Y), [], [Y,X]). mapnodes(trans, p(a,p(b,a),c), q(a,q(b,a),c)). checknodes(\==(T), p(X,p(Y,X),Z)). sumnodes(vars, [c(X), p(X,Y), q(Y)], [], [Y,Y,X,X]). % another one maplist(mapargs(number_atom),[c(1),s(1,2,3)],[c('1'),s('1','2','3')]). @end example @node Association Lists, AVL Trees, Apply Macros, Library @section Association Lists @cindex association list The following association list manipulation predicates are available once included with the @code{use_module(library(assoc))} command. The original library used Richard O'Keefe's implementation, on top of unbalanced binary trees. The current code utilises code from the red-black trees library and emulates the SICStus Prolog interface. @table @code @item assoc_to_list(+@var{Assoc},?@var{List}) @findex assoc_to_list/2 @syindex assoc_to_list/2 @cnindex assoc_to_list/2 Given an association list @var{Assoc} unify @var{List} with a list of the form @var{Key-Val}, where the elements @var{Key} are in ascending order. @item del_assoc(+@var{Key}, +@var{Assoc}, ?@var{Val}, ?@var{NewAssoc}) @findex del_assoc/4 @syindex del_assoc/4 @cnindex del_assoc/4 Succeeds if @var{NewAssoc} is an association list, obtained by removing the element with @var{Key} and @var{Val} from the list @var{Assoc}. @item del_max_assoc(+@var{Assoc}, ?@var{Key}, ?@var{Val}, ?@var{NewAssoc}) @findex del_max_assoc/4 @syindex del_max_assoc/4 @cnindex del_max_assoc/4 Succeeds if @var{NewAssoc} is an association list, obtained by removing the largest element of the list, with @var{Key} and @var{Val} from the list @var{Assoc}. @item del_min_assoc(+@var{Assoc}, ?@var{Key}, ?@var{Val}, ?@var{NewAssoc}) @findex del_min_assoc/4 @syindex del_min_assoc/4 @cnindex del_min_assoc/4 Succeeds if @var{NewAssoc} is an association list, obtained by removing the smallest element of the list, with @var{Key} and @var{Val} from the list @var{Assoc}. @item empty_assoc(+@var{Assoc}) @findex empty_assoc/1 @syindex empty_assoc/1 @cnindex empty_assoc/1 Succeeds if association list @var{Assoc} is empty. @item gen_assoc(+@var{Assoc},?@var{Key},?@var{Value}) @findex gen_assoc/3 @syindex gen_assoc/3 @cnindex gen_assoc/3 Given the association list @var{Assoc}, unify @var{Key} and @var{Value} with two associated elements. It can be used to enumerate all elements in the association list. @item get_assoc(+@var{Key},+@var{Assoc},?@var{Value}) @findex get_next_assoc/4 @syindex get_next_assoc/4 @cnindex get_next_assoc/4 If @var{Key} is one of the elements in the association list @var{Assoc}, return the associated value. @item get_assoc(+@var{Key},+@var{Assoc},?@var{Value},+@var{NAssoc},?@var{NValue}) @findex get_assoc/5 @syindex get_assoc/5 @cnindex get_assoc/5 If @var{Key} is one of the elements in the association list @var{Assoc}, return the associated value @var{Value} and a new association list @var{NAssoc} where @var{Key} is associated with @var{NValue}. @item get_prev_assoc(+@var{Key},+@var{Assoc},?@var{Next},?@var{Value}) @findex get_prev_assoc/4 @syindex get_prev_assoc/4 @cnindex get_prev_assoc/4 If @var{Key} is one of the elements in the association list @var{Assoc}, return the previous key, @var{Next}, and its value, @var{Value}. @item get_next_assoc(+@var{Key},+@var{Assoc},?@var{Next},?@var{Value}) @findex get_assoc/3 @syindex get_assoc/3 @cnindex get_assoc/3 If @var{Key} is one of the elements in the association list @var{Assoc}, return the next key, @var{Next}, and its value, @var{Value}. @item is_assoc(+@var{Assoc}) @findex is_assoc/1 @syindex is_assoc/1 @cnindex is_assoc/1 Succeeds if @var{Assoc} is an association list, that is, if it is a red-black tree. @item list_to_assoc(+@var{List},?@var{Assoc}) @findex list_to_assoc/2 @syindex list_to_assoc/2 @cnindex list_to_assoc/2 Given a list @var{List} such that each element of @var{List} is of the form @var{Key-Val}, and all the @var{Keys} are unique, @var{Assoc} is the corresponding association list. @item map_assoc(+@var{Pred},+@var{Assoc}) @findex map_assoc/2 @syindex map_assoc/2 @cnindex map_assoc/2 Succeeds if the unary predicate name @var{Pred}(@var{Val}) holds for every element in the association list. @item map_assoc(+@var{Pred},+@var{Assoc},?@var{New}) @findex map_assoc/3 @syindex map_assoc/3 @cnindex map_assoc/3 Given the binary predicate name @var{Pred} and the association list @var{Assoc}, @var{New} in an association list with keys in @var{Assoc}, and such that if @var{Key-Val} is in @var{Assoc}, and @var{Key-Ans} is in @var{New}, then @var{Pred}(@var{Val},@var{Ans}) holds. @item max_assoc(+@var{Assoc},-@var{Key},?@var{Value}) @findex max_assoc/3 @syindex max_assoc/3 @cnindex max_assoc/3 Given the association list @var{Assoc}, @var{Key} in the largest key in the list, and @var{Value} the associated value. @item min_assoc(+@var{Assoc},-@var{Key},?@var{Value}) @findex min_assoc/3 @syindex min_assoc/3 @cnindex min_assoc/3 Given the association list @var{Assoc}, @var{Key} in the smallest key in the list, and @var{Value} the associated value. @item ord_list_to_assoc(+@var{List},?@var{Assoc}) @findex ord_list_to_assoc/2 @syindex ord_list_to_assoc/2 @cnindex ord_list_to_assoc/2 Given an ordered list @var{List} such that each element of @var{List} is of the form @var{Key-Val}, and all the @var{Keys} are unique, @var{Assoc} is the corresponding association list. @item put_assoc(+@var{Key},+@var{Assoc},+@var{Val},+@var{New}) @findex put_assoc/4 @syindex put_assoc/4 @cnindex put_assoc/4 The association list @var{New} includes and element of association @var{key} with @var{Val}, and all elements of @var{Assoc} that did not have key @var{Key}. @end table @node AVL Trees, Heaps, Association Lists, Library @section AVL Trees @cindex AVL trees AVL trees are balanced search binary trees. They are named after their inventors, Adelson-Velskii and Landis, and they were the first dynamically balanced trees to be proposed. The YAP AVL tree manipulation predicates library uses code originally written by Martin van Emdem and published in the Logic Programming Newsletter, Autumn 1981. A bug in this code was fixed by Philip Vasey, in the Logic Programming Newsletter, Summer 1982. The library currently only includes routines to insert and lookup elements in the tree. Please try red-black trees if you need deletion. @table @code @item avl_new(+@var{T}) @findex avl_new/1 @snindex avl_new/1 @cnindex avl_new/1 Create a new tree. @item avl_insert(+@var{Key},?@var{Value},+@var{T0},-@var{TF}) @findex avl_insert/4 @snindex avl_insert/4 @cnindex avl_insert/4 Add an element with key @var{Key} and @var{Value} to the AVL tree @var{T0} creating a new AVL tree @var{TF}. Duplicated elements are allowed. @item avl_lookup(+@var{Key},-@var{Value},+@var{T}) @findex avl_lookup/3 @snindex avl_lookup/3 @cnindex avl_lookup/3 Lookup an element with key @var{Key} in the AVL tree @var{T}, returning the value @var{Value}. @end table @node Heaps, Lists, AVL Trees, Library @section Heaps @cindex heap A heap is a labelled binary tree where the key of each node is less than or equal to the keys of its sons. The point of a heap is that we can keep on adding new elements to the heap and we can keep on taking out the minimum element. If there are N elements total, the total time is O(NlgN). If you know all the elements in advance, you are better off doing a merge-sort, but this file is for when you want to do say a best-first search, and have no idea when you start how many elements there will be, let alone what they are. The following heap manipulation routines are available once included with the @code{use_module(library(heaps))} command. @table @code @item add_to_heap(+@var{Heap},+@var{key},+@var{Datum},-@var{NewHeap}) @findex add_to_heap/4 @syindex add_to_heap/4 @cnindex add_to_heap/4 Inserts the new @var{Key-Datum} pair into the heap. The insertion is not stable, that is, if you insert several pairs with the same @var{Key} it is not defined which of them will come out first, and it is possible for any of them to come out first depending on the history of the heap. @item empty_heap(?@var{Heap}) @findex empty_heap/1 @syindex empty_heap/1 @cnindex empty_heap/1 Succeeds if @var{Heap} is an empty heap. @item get_from_heap(+@var{Heap},-@var{key},-@var{Datum},-@var{Heap}) @findex get_from_heap/4 @syindex get_from_heap/4 @cnindex get_from_heap/4 Returns the @var{Key-Datum} pair in @var{OldHeap} with the smallest @var{Key}, and also a @var{Heap} which is the @var{OldHeap} with that pair deleted. @item heap_size(+@var{Heap}, -@var{Size}) @findex heap_size/2 @syindex heap_size/2 @cnindex heap_size/2 Reports the number of elements currently in the heap. @item heap_to_list(+@var{Heap}, -@var{List}) @findex heap_to_list/2 @syindex heap_to_list/2 @cnindex heap_to_list/2 Returns the current set of @var{Key-Datum} pairs in the @var{Heap} as a @var{List}, sorted into ascending order of @var{Keys}. @item list_to_heap(+@var{List}, -@var{Heap}) @findex list_to_heap/2 @syindex list_to_heap/2 @cnindex list_to_heap/2 Takes a list of @var{Key-Datum} pairs (such as keysort could be used to sort) and forms them into a heap. @item min_of_heap(+@var{Heap}, -@var{Key}, -@var{Datum}) @findex min_of_heap/3 @syindex min_of_heap/3 @cnindex min_of_heap/3 Returns the Key-Datum pair at the top of the heap (which is of course the pair with the smallest Key), but does not remove it from the heap. @item min_of_heap(+@var{Heap}, -@var{Key1}, -@var{Datum1}, -@var{Key2}, -@var{Datum2}) @findex min_of_heap/5 @syindex min_of_heap/5 @cnindex min_of_heap/5 Returns the smallest (Key1) and second smallest (Key2) pairs in the heap, without deleting them. @end table @node Lists, matrix, Heaps, Library @section List Manipulation @cindex list manipulation The following list manipulation routines are available once included with the @code{use_module(library(lists))} command. @table @code @item append(?@var{Prefix},?@var{Suffix},?@var{Combined}) @findex append/3 @syindex append/3 @cnindex append/3 True when all three arguments are lists, and the members of @var{Combined} are the members of @var{Prefix} followed by the members of @var{Suffix}. It may be used to form @var{Combined} from a given @var{Prefix}, @var{Suffix} or to take a given @var{Combined} apart. @item append(?@var{Lists},?@var{Combined}) @findex append/2 @syindex append/2 @cnindex append/2 Holds if the lists of @var{Lists} can be concatenated as a @var{Combined} list. @item delete(+@var{List}, ?@var{Element}, ?@var{Residue}) @findex delete/3 @syindex delete/3 @cnindex delete/3 True when @var{List} is a list, in which @var{Element} may or may not occur, and @var{Residue} is a copy of @var{List} with all elements identical to @var{Element} deleted. @item flatten(+@var{List}, ?@var{FlattenedList}) @findex flatten/2 @syindex flatten/2 @cnindex flatten/2 Flatten a list of lists @var{List} into a single list @var{FlattenedList}. @example ?- flatten([[1],[2,3],[4,[5,6],7,8]],L). L = [1,2,3,4,5,6,7,8] ? ; no @end example @item is_list(+@var{List}) @findex is_list/1 @syindex is_list/1 @cnindex is_list/1 True when @var{List} is a proper list. That is, @var{List} is bound to the empty list (nil) or a term with functor '.' and arity 2. @item last(+@var{List},?@var{Last}) @findex last/2 @syindex last/2 @cnindex last/2 True when @var{List} is a list and @var{Last} is identical to its last element. @item list_concat(+@var{Lists},?@var{List}) @findex list_concat/2 @snindex list_concat/2 @cnindex list_concat/2 True when @var{Lists} is a list of lists and @var{List} is the concatenation of @var{Lists}. @item member(?@var{Element}, ?@var{Set}) @findex member/2 @syindex member/2 @cnindex member/2 True when @var{Set} is a list, and @var{Element} occurs in it. It may be used to test for an element or to enumerate all the elements by backtracking. @item memberchk(+@var{Element}, +@var{Set}) @findex memberchk/2 @syindex memberchk/2 @cnindex memberchk/2 As @code{member/2}, but may only be used to test whether a known @var{Element} occurs in a known Set. In return for this limited use, it is more efficient when it is applicable. @item nth0(?@var{N}, ?@var{List}, ?@var{Elem}) @findex nth0/2 @syindex nth0/2 @cnindex nth0/2 True when @var{Elem} is the Nth member of @var{List}, counting the first as element 0. (That is, throw away the first N elements and unify @var{Elem} with the next.) It can only be used to select a particular element given the list and index. For that task it is more efficient than @code{member/2} @item nth(?@var{N}, ?@var{List}, ?@var{Elem}) @findex nth/2 @syindex nth/2 @cnindex nth/2 The same as @code{nth0/3}, except that it counts from 1, that is @code{nth(1, [H|_], H)}. @item nth0(?@var{N}, ?@var{List}, ?@var{Elem}, ?@var{Rest}) @findex nth0/4 @syindex nth0/4 @cnindex nth0/4 Unifies @var{Elem} with the Nth element of @var{List}, counting from 0, and @var{Rest} with the other elements. It can be used to select the Nth element of @var{List} (yielding @var{Elem} and @var{Rest}), or to insert @var{Elem} before the Nth (counting from 1) element of @var{Rest}, when it yields @var{List}, e.g. @code{nth0(2, List, c, [a,b,d,e])} unifies List with @code{[a,b,c,d,e]}. @code{nth/4} is the same except that it counts from 1. @code{nth0/4} can be used to insert @var{Elem} after the Nth element of @var{Rest}. @item nth(?@var{N}, ?@var{List}, ?@var{Elem}, ?@var{Rest}) @findex nth/4 @syindex nth/4 @cnindex nth/4 Unifies @var{Elem} with the Nth element of @var{List}, counting from 1, and @var{Rest} with the other elements. It can be used to select the Nth element of @var{List} (yielding @var{Elem} and @var{Rest}), or to insert @var{Elem} before the Nth (counting from 1) element of @var{Rest}, when it yields @var{List}, e.g. @code{nth(1, List, c, [a,b,d,e])} unifies List with @code{[a,b,c,d,e]}. @code{nth/4} can be used to insert @var{Elem} after the Nth element of @var{Rest}. @item permutation(+@var{List},?@var{Perm}) @findex permutation/2 @syindex permutation/2 @cnindex permutation/2 True when @var{List} and @var{Perm} are permutations of each other. @item remove_duplicates(+@var{List}, ?@var{Pruned}) @findex remove_duplicates/2 @syindex remove_duplicates/2 @cnindex remove_duplicates/2 Removes duplicated elements from @var{List}. Beware: if the @var{List} has non-ground elements, the result may surprise you. @item reverse(+@var{List}, ?@var{Reversed}) @findex reverse/2 @syindex reverse/2 @cnindex reverse/2 True when @var{List} and @var{Reversed} are lists with the same elements but in opposite orders. @item same_length(?@var{List1}, ?@var{List2}) @findex same_length/2 @syindex same_length/2 @cnindex same_length/2 True when @var{List1} and @var{List2} are both lists and have the same number of elements. No relation between the values of their elements is implied. Modes @code{same_length(-,+)} and @code{same_length(+,-)} generate either list given the other; mode @code{same_length(-,-)} generates two lists of the same length, in which case the arguments will be bound to lists of length 0, 1, 2, ... @item select(?@var{Element}, ?@var{Set}, ?@var{Residue}) @findex select/3 @syindex select/3 @cnindex select/3 True when @var{Set} is a list, @var{Element} occurs in @var{Set}, and @var{Residue} is everything in @var{Set} except @var{Element} (things stay in the same order). @item sublist(?@var{Sublist}, ?@var{List}) @findex sublist/2 @syindex sublist/2 @cnindex sublist/2 True when both @code{append(_,Sublist,S)} and @code{append(S,_,List)} hold. @item suffix(?@var{Suffix}, ?@var{List}) @findex suffix/2 @syindex suffix/2 @cnindex suffix/2 Holds when @code{append(_,Suffix,List)} holds. @item sum_list(?@var{Numbers}, ?@var{Total}) @findex sum_list/2 @syindex sum_list/2 @cnindex sum_list/2 True when @var{Numbers} is a list of numbers, and @var{Total} is their sum. @item sumlist(?@var{Numbers}, ?@var{Total}) @findex sumlist/2 @syindex sumlist/2 @cnindex sumlist/2 True when @var{Numbers} is a list of integers, and @var{Total} is their sum. The same as @code{sum_list/2}, please do use @code{sum_list/2} instead. @item max_list(?@var{Numbers}, ?@var{Max}) @findex max_list/2 @syindex max_list/2 @cnindex max_list/2 True when @var{Numbers} is a list of numbers, and @var{Max} is the maximum. @item min_list(?@var{Numbers}, ?@var{Min}) @findex min_list/2 @syindex min_list/2 @cnindex min_list/2 True when @var{Numbers} is a list of numbers, and @var{Min} is the minimum. @end table @node matrix, MATLAB, Lists, Library @section Matrix Library @cindex Matrix Library This package provides a fast implementation of multi-dimensional matrices of integers and floats. In contrast to dynamic arrays, these matrices are multi-dimensional and compact. In contrast to static arrays. these arrays are allocated in the stack. Matrices are available by loading the library @code{library(matrix)}. Notice that the functionality in this library is only partial. Please contact the YAP maintainers if you need for extra functionality. @table @code @item matrix_new(+@var{Type},+@var{Dims},-@var{Matrix}) @findex matrix_new/3 @snindex matrix_new/3 @cnindex matrix_new/3 Create a new matrix @var{Matrix} of type @var{Type}, which may be one of @code{ints} or @code{floats}, and with a list of dimensions @var{Dims}. The matrix will be initialised to zeros. @example ?- matrix_new(ints,[2,3],Matrix). Matrix = 0 @end example Notice that currently YAP will always write a matrix as @code{0}. @item matrix_new(+@var{Type},+@var{Dims},+@var{List},-@var{Matrix}) @findex matrix_new/4 @snindex matrix_new/4 @cnindex matrix_new/4 Create a new matrix @var{Matrix} of type @var{Type}, which may be one of @code{ints} or @code{floats}, with dimensions @var{Dims}, and initialised from list @var{List}. @item matrix_new_set(?@var{Dims},+@var{OldMatrix},+@var{Value},-@var{NewMatrix}) @findex matrix_new_set/4 @snindex matrix_new_set/4 @cnindex matrix_new_set/4 Create a new matrix @var{NewMatrix} of type @var{Type}, with dimensions @var{Dims}. The elements of @var{NewMatrix} are set to @var{Value}. @item matrix_dims(+@var{Matrix},-@var{Dims}) @findex matrix_dims/2 @snindex matrix_dims/2 @cnindex matrix_dims/2 Unify @var{Dims} with a list of dimensions for @var{Matrix}. @item matrix_ndims(+@var{Matrix},-@var{Dims}) @findex matrix_ndims/2 @snindex matrix_ndims/2 @cnindex matrix_ndims/2 Unify @var{NDims} with the number of dimensions for @var{Matrix}. @item matrix_size(+@var{Matrix},-@var{NElems}) @findex matrix_size/2 @snindex matrix_size/2 @cnindex matrix_size/2 Unify @var{NElems} with the number of elements for @var{Matrix}. @item matrix_type(+@var{Matrix},-@var{Type}) @findex matrix_type/2 @snindex matrix_type/2 @cnindex matrix_type/2 Unify @var{NElems} with the type of the elements in @var{Matrix}. @item matrix_to_list(+@var{Matrix},-@var{Elems}) @findex matrix_to_list/2 @snindex matrix_to_list/2 @cnindex matrix_to_list/2 Unify @var{Elems} with the list including all the elements in @var{Matrix}. @item matrix_get(+@var{Matrix},+@var{Position},-@var{Elem}) @findex matrix_get/3 @snindex matrix_get/3 @cnindex matrix_get/3 Unify @var{Elem} with the element of @var{Matrix} at position @var{Position}. @item matrix_set(+@var{Matrix},+@var{Position},+@var{Elem}) @findex matrix_set/3 @snindex matrix_set/3 @cnindex matrix_set/3 Set the element of @var{Matrix} at position @var{Position} to @var{Elem}. @item matrix_set_all(+@var{Matrix},+@var{Elem}) @findex matrix_set_all/2 @snindex matrix_set_all/2 @cnindex matrix_set_all/2 Set all element of @var{Matrix} to @var{Elem}. @item matrix_add(+@var{Matrix},+@var{Position},+@var{Operand}) @findex matrix_add/3 @snindex matrix_add/3 @cnindex matrix_add/3 Add @var{Operand} to the element of @var{Matrix} at position @var{Position}. @item matrix_inc(+@var{Matrix},+@var{Position}) @findex matrix_inc/2 @snindex matrix_inc/2 @cnindex matrix_inc/2 Increment the element of @var{Matrix} at position @var{Position}. @item matrix_inc(+@var{Matrix},+@var{Position},-@var{Element}) @findex matrix_inc/3 @snindex matrix_inc/3 @cnindex matrix_inc/3 Increment the element of @var{Matrix} at position @var{Position} and unify with @var{Element}. @item matrix_dec(+@var{Matrix},+@var{Position}) @findex matrix_dec/2 @snindex matrix_dec/2 @cnindex matrix_dec/2 Decrement the element of @var{Matrix} at position @var{Position}. @item matrix_dec(+@var{Matrix},+@var{Position},-@var{Element}) @findex matrix_dec/3 @snindex matrix_dec/3 @cnindex matrix_dec/3 Decrement the element of @var{Matrix} at position @var{Position} and unify with @var{Element}. @item matrix_arg_to_offset(+@var{Matrix},+@var{Position},-@var{Offset}) @findex matrix_arg_to_offset/3 @snindex matrix_arg_to_offset/3 @cnindex matrix_arg_to_offset/3 Given matrix @var{Matrix} return what is the numerical @var{Offset} of the element at @var{Position}. @item matrix_offset_to_arg(+@var{Matrix},-@var{Offset},+@var{Position}) @findex matrix_offset_to_arg/3 @snindex matrix_offset_to_arg/3 @cnindex matrix_offset_to_arg/3 Given a position @var{Position } for matrix @var{Matrix} return the corresponding numerical @var{Offset} from the beginning of the matrix. @item matrix_max(+@var{Matrix},+@var{Max}) @findex matrix_max/2 @snindex matrix_max/2 @cnindex matrix_max/2 Unify @var{Max} with the maximum in matrix @var{Matrix}. @item matrix_maxarg(+@var{Matrix},+@var{Maxarg}) @findex matrix_maxarg/2 @snindex matrix_maxarg/2 @cnindex matrix_maxarg/2 Unify @var{Max} with the position of the maximum in matrix @var{Matrix}. @item matrix_min(+@var{Matrix},+@var{Min}) @findex matrix_min/2 @snindex matrix_min/2 @cnindex matrix_min/2 Unify @var{Min} with the minimum in matrix @var{Matrix}. @item matrix_minarg(+@var{Matrix},+@var{Minarg}) @findex matrix_minarg/2 @snindex matrix_minarg/2 @cnindex matrix_minarg/2 Unify @var{Min} with the position of the minimum in matrix @var{Matrix}. @item matrix_sum(+@var{Matrix},+@var{Sum}) @findex matrix_sum/2 @snindex matrix_sum/2 @cnindex matrix_sum/2 Unify @var{Sum} with the sum of all elements in matrix @var{Matrix}. @c @item matrix_add_to_all(+@var{Matrix},+@var{Element}) @c @findex matrix_add_to_all/2 @c @snindex matrix_add_to_all/2 @c @cnindex matrix_add_to_all/2 @c Add @var{Element} to all elements of matrix @var{Matrix}. @item matrix_agg_lines(+@var{Matrix},+@var{Aggregate}) @findex matrix_agg_lines/2 @snindex matrix_agg_lines/2 @cnindex matrix_agg_lines/2 If @var{Matrix} is a n-dimensional matrix, unify @var{Aggregate} with the n-1 dimensional matrix where each element is obtained by adding all Matrix elements with same last n-1 index. @item matrix_agg_cols(+@var{Matrix},+@var{Aggregate}) @findex matrix_agg_cols/2 @snindex matrix_agg_cols/2 @cnindex matrix_agg_cols/2 If @var{Matrix} is a n-dimensional matrix, unify @var{Aggregate} with the one dimensional matrix where each element is obtained by adding all Matrix elements with same first index. @item matrix_op(+@var{Matrix1},+@var{Matrix2},+@var{Op},-@var{Result}) @findex matrix_op/4 @snindex matrix_op/4 @cnindex matrix_op/4 @var{Result} is the result of applying @var{Op} to matrix @var{Matrix1} and @var{Matrix2}. Currently, only addition (@code{+}) is supported. @item matrix_op_to_all(+@var{Matrix1},+@var{Op},+@var{Operand},-@var{Result}) @findex matrix_op/4 @snindex matrix_op/4 @cnindex matrix_op/4 @var{Result} is the result of applying @var{Op} to all elements of @var{Matrix1}, with @var{Operand} as the second argument. Currently, only addition (@code{+}), multiplication (@code{+}), and division (@code{/}) are supported. @item matrix_op_to_lines(+@var{Matrix1},+@var{Lines},+@var{Op},-@var{Result}) @findex matrix_op_to_lines/4 @snindex matrix_op_to_lines/4 @cnindex matrix_op_to_lines/4 @var{Result} is the result of applying @var{Op} to all elements of @var{Matrix1}, with the corresponding element in @var{Lines} as the second argument. Currently, only division (@code{/}) is supported. @item matrix_op_to_cols(+@var{Matrix1},+@var{Cols},+@var{Op},-@var{Result}) @findex matrix_op_to_cols/4 @snindex matrix_op_to_cols/4 @cnindex matrix_op_to_cols/4 @var{Result} is the result of applying @var{Op} to all elements of @var{Matrix1}, with the corresponding element in @var{Cols} as the second argument. Currently, only addition (@code{+}) is supported. Notice that @var{Cols} will have n-1 dimensions. @item matrix_shuffle(+@var{Matrix},+@var{NewOrder},-@var{Shuffle}) @findex matrix_shuffle/3 @snindex matrix_shuffle/3 @cnindex matrix_shuffle/3 Shuffle the dimensions of matrix @var{Matrix} according to @var{NewOrder}. The list @var{NewOrder} must have all the dimensions of @var{Matrix}, starting from 0. @item matrix_transpose(+@var{Matrix},-@var{Transpose}) @findex matrix_reorder/3 @snindex matrix_reorder/3 @cnindex matrix_reorder/3 Transpose matrix @var{Matrix} to @var{Transpose}. Equivalent to: @example matrix_transpose(Matrix,Transpose) :- matrix_shuffle(Matrix,[1,0],Transpose). @end example @item matrix_expand(+@var{Matrix},+@var{NewDimensions},-@var{New}) @findex matrix_expand/3 @snindex matrix_expand/3 @cnindex matrix_expand/3 Expand @var{Matrix} to occupy new dimensions. The elements in @var{NewDimensions} are either 0, for an existing dimension, or a positive integer with the size of the new dimension. @item matrix_select(+@var{Matrix},+@var{Dimension},+@var{Index},-@var{New}) @findex matrix_select/3 @snindex matrix_select/3 @cnindex matrix_select/3 Select from @var{Matrix} the elements who have @var{Index} at @var{Dimension}. @end table @node MATLAB, Non-Backtrackable Data Structures, matrix, Library @section MATLAB Package Interface @cindex Matlab Interface The MathWorks MATLAB is a widely used package for array processing. YAP now includes a straightforward interface to MATLAB. To actually use it, you need to install YAP calling @code{configure} with the @code{--with-matlab=DIR} option, and you need to call @code{use_module(library(lists))} command. @table @code @item start_matlab(+@var{Options}) @findex start_matlab/1 @snindex start_matlab/1 @cnindex start_matlab/1 Start a matlab session. The argument @var{Options} may either be the empty string/atom or the command to call matlab. The command may fail. @item close_matlab @findex close_matlab/0 @snindex close_matlab/0 @cnindex close_matlab/0 Stop the current matlab session. @item matlab_on @findex matlab_on/0 @snindex matlab_on/0 @cnindex matlab_on/0 Holds if a matlab session is on. @item matlab_eval_string(+@var{Command}) @findex matlab_eval_string/1 @snindex matlab_eval_string/1 @cnindex matlab_eval_string/1 Holds if matlab evaluated successfully the command @var{Command}. @item matlab_eval_string(+@var{Command}, -@var{Answer}) @findex matlab_eval_string/2 @snindex matlab_eval_string/2 @cnindex matlab_eval_string/2 MATLAB will evaluate the command @var{Command} and unify @var{Answer} with a string reporting the result. @item matlab_cells(+@var{Size}, ?@var{Array}) @findex matlab_cells/2 @snindex matlab_cells/2 @cnindex matlab_cells/2 MATLAB will create an empty vector of cells of size @var{Size}, and if @var{Array} is bound to an atom, store the array in the matlab variable with name @var{Array}. Corresponds to the MATLAB command @code{cells}. @item matlab_cells(+@var{SizeX}, +@var{SizeY}, ?@var{Array}) @findex matlab_cells/3 @snindex matlab_cells/3 @cnindex matlab_cells/3 MATLAB will create an empty array of cells of size @var{SizeX} and @var{SizeY}, and if @var{Array} is bound to an atom, store the array in the matlab variable with name @var{Array}. Corresponds to the MATLAB command @code{cells}. @item matlab_initialized_cells(+@var{SizeX}, +@var{SizeY}, +@var{List}, ?@var{Array}) @findex matlab_initialized_cells/4 @snindex matlab_initialized_cells/4 @cnindex matlab_initialized_cells/4 MATLAB will create an array of cells of size @var{SizeX} and @var{SizeY}, initialized from the list @var{List}, and if @var{Array} is bound to an atom, store the array in the matlab variable with name @var{Array}. @item matlab_matrix(+@var{SizeX}, +@var{SizeY}, +@var{List}, ?@var{Array}) @findex matlab_matrix/4 @snindex matlab_matrix/4 @cnindex matlab_matrix/4 MATLAB will create an array of floats of size @var{SizeX} and @var{SizeY}, initialized from the list @var{List}, and if @var{Array} is bound to an atom, store the array in the matlab variable with name @var{Array}. @item matlab_set(+@var{MatVar}, +@var{X}, +@var{Y}, +@var{Value}) @findex matlab_set/4 @snindex matlab_set/4 @cnindex matlab_set/4 Call MATLAB to set element @var{MatVar}(@var{X}, @var{Y}) to @var{Value}. Notice that this command uses the MATLAB array access convention. @item matlab_get_variable(+@var{MatVar}, -@var{List}) @findex matlab_get_variable/2 @snindex matlab_get_variable/2 @cnindex matlab_get_variable/2 Unify MATLAB variable @var{MatVar} with the List @var{List}. @item matlab_item(+@var{MatVar}, +@var{X}, ?@var{Val}) @findex matlab_item/3 @snindex matlab_item/3 @cnindex matlab_item/3 Read or set MATLAB @var{MatVar}(@var{X}) from/to @var{Val}. Use @code{C} notation for matrix access (ie, starting from 0). @item matlab_item(+@var{MatVar}, +@var{X}, +@var{Y}, ?@var{Val}) @findex matlab_item/4 @snindex matlab_item/4 @cnindex matlab_item/4 Read or set MATLAB @var{MatVar}(@var{X},@var{Y}) from/to @var{Val}. Use @code{C} notation for matrix access (ie, starting from 0). @item matlab_item1(+@var{MatVar}, +@var{X}, ?@var{Val}) @findex matlab_item/3 @snindex matlab_item/3 @cnindex matlab_item/3 Read or set MATLAB @var{MatVar}(@var{X}) from/to @var{Val}. Use MATLAB notation for matrix access (ie, starting from 1). @item matlab_item1(+@var{MatVar}, +@var{X}, +@var{Y}, ?@var{Val}) @findex matlab_item/4 @snindex matlab_item/4 @cnindex matlab_item/4 Read or set MATLAB @var{MatVar}(@var{X},@var{Y}) from/to @var{Val}. Use MATLAB notation for matrix access (ie, starting from 1). @item matlab_sequence(+@var{Min}, +@var{Max}, ?@var{Array}) @findex matlab_sequence/3 @snindex matlab_sequence/3 @cnindex matlab_sequence/3 MATLAB will create a sequence going from @var{Min} to @var{Max}, and if @var{Array} is bound to an atom, store the sequence in the matlab variable with name @var{Array}. @item matlab_vector(+@var{Size}, +@var{List}, ?@var{Array}) @findex matlab_vector/4 @snindex matlab_vector/4 @cnindex matlab_vector/4 MATLAB will create a vector of floats of size @var{Size}, initialized from the list @var{List}, and if @var{Array} is bound to an atom, store the array in the matlab variable with name @var{Array}. @item matlab_zeros(+@var{Size}, ?@var{Array}) @findex matlab_zeros/2 @snindex matlab_zeros/2 @cnindex matlab_zeros/2 MATLAB will create a vector of zeros of size @var{Size}, and if @var{Array} is bound to an atom, store the array in the matlab variable with name @var{Array}. Corresponds to the MATLAB command @code{zeros}. @item matlab_zeros(+@var{SizeX}, +@var{SizeY}, ?@var{Array}) @findex matlab_zeros/3 @snindex matlab_zeros/3 @cnindex matlab_zeros/3 MATLAB will create an array of zeros of size @var{SizeX} and @var{SizeY}, and if @var{Array} is bound to an atom, store the array in the matlab variable with name @var{Array}. Corresponds to the MATLAB command @code{zeros}. @item matlab_zeros(+@var{SizeX}, +@var{SizeY}, +@var{SizeZ}, ?@var{Array}) @findex matlab_zeros/4 @snindex matlab_zeros/4 @cnindex matlab_zeros/4 MATLAB will create an array of zeros of size @var{SizeX}, @var{SizeY}, and @var{SizeZ}. If @var{Array} is bound to an atom, store the array in the matlab variable with name @var{Array}. Corresponds to the MATLAB command @code{zeros}. @item matlab_zeros(+@var{SizeX}, +@var{SizeY}, +@var{SizeZ}, ?@var{Array}) @findex matlab_zeros/4 @snindex matlab_zeros/4 @cnindex matlab_zeros/4 MATLAB will create an array of zeros of size @var{SizeX}, @var{SizeY}, and @var{SizeZ}. If @var{Array} is bound to an atom, store the array in the matlab variable with name @var{Array}. Corresponds to the MATLAB command @code{zeros}. @end table @node Non-Backtrackable Data Structures, Ordered Sets, MATLAB, Library @section Non-Backtrackable Data Structures The following routines implement well-known data-structures using global non-backtrackable variables (implemented on the Prolog stack). The data-structures currently supported are Queues, Heaps, and Beam for Beam search. They are allowed through @code{library(nb)}. @table @code @item nb_queue(-@var{Queue}) @findex nb_queue/1 @snindex nb_queue/1 @cnindex nb_queue/1 Create a @var{Queue}. @item nb_queue_close(+@var{Queue}, -@var{Head}, ?@var{Tail}) @findex nb_queue_close/3 @snindex nb_queue_close/3 @cnindex nb_queue_close/3 Unify the queue @var{Queue} with a difference list @var{Head}-@var{Tail}. The queue will now be empty and no further elements can be added. @item nb_queue_queue(+@var{Queue}, +@var{Element}) @findex nb_queue_enqueue/2 @snindex nb_queue_enqueue/2 @cnindex nb_queue_enqueue/2 Add @var{Element} to the front of the queue @var{Queue}. @item nb_queue_dequeue(+@var{Queue}, -@var{Element}) @findex nb_queue_dequeue/2 @snindex nb_queue_dequeue/2 @cnindex nb_queue_dequeue/2 Remove @var{Element} from the front of the queue @var{Queue}. Fail if the queue is empty. @item nb_queue_peek(+@var{Queue}, -@var{Element}) @findex nb_queue_peek/2 @snindex nb_queue_peek/2 @cnindex nb_queue_peek/2 @var{Element} is the front of the queue @var{Queue}. Fail if the queue is empty. @item nb_queue_size(+@var{Queue}, -@var{Size}) @findex nb_queue_size/2 @snindex nb_queue_size/2 @cnindex nb_queue_size/2 Unify @var{Size} with the number of elements in the queue @var{Queue}. @item nb_queue_empty(+@var{Queue}) @findex nb_queue_empty/1 @snindex nb_queue_empty/1 @cnindex nb_queue_empty/1 Succeeds if @var{Queue} is empty. @item nb_heap(+@var{DefaultSize},-@var{Heap}) @findex nb_heap/1 @snindex nb_heap/1 @cnindex nb_heap/1 Create a @var{Heap} with default size @var{DefaultSize}. Note that size will expand as needed. @item nb_heap_close(+@var{Heap}) @findex nb_heap_close/1 @snindex nb_heap_close/1 @cnindex nb_heap_close/1 Close the heap @var{Heap}: no further elements can be added. @item nb_heap_add(+@var{Heap}, +@var{Key}, +@var{Value}) @findex nb_heap_add/3 @snindex nb_heap_add/3 @cnindex nb_heap_add/3 Add @var{Key}-@var{Value} to the heap @var{Heap}. The key is sorted on @var{Key} only. @item nb_heap_del(+@var{Heap}, -@var{Key}, -@var{Value}) @findex nb_heap_del/3 @snindex nb_heap_del/3 @cnindex nb_heap_del/3 Remove element @var{Key}-@var{Value} with smallest @var{Value} in heap @var{Heap}. Fail if the heap is empty. @item nb_heap_peek(+@var{Heap}, -@var{Key}, -@var{Value})) @findex nb_heap_peek/3 @snindex nb_heap_peek/3 @cnindex nb_heap_peek/3 @var{Key}-@var{Value} is the element with smallest @var{Key} in the heap @var{Heap}. Fail if the heap is empty. @item nb_heap_size(+@var{Heap}, -@var{Size}) @findex nb_heap_size/2 @snindex nb_heap_size/2 @cnindex nb_heap_size/2 Unify @var{Size} with the number of elements in the heap @var{Heap}. @item nb_heap_empty(+@var{Heap}) @findex nb_heap_empty/1 @snindex nb_heap_empty/1 @cnindex nb_heap_empty/1 Succeeds if @var{Heap} is empty. @item nb_beam(+@var{DefaultSize},-@var{Beam}) @findex nb_beam/1 @snindex nb_beam/1 @cnindex nb_beam/1 Create a @var{Beam} with default size @var{DefaultSize}. Note that size is fixed throughout. @item nb_beam_close(+@var{Beam}) @findex nb_beam_close/1 @snindex nb_beam_close/1 @cnindex nb_beam_close/1 Close the beam @var{Beam}: no further elements can be added. @item nb_beam_add(+@var{Beam}, +@var{Key}, +@var{Value}) @findex nb_beam_add/3 @snindex nb_beam_add/3 @cnindex nb_beam_add/3 Add @var{Key}-@var{Value} to the beam @var{Beam}. The key is sorted on @var{Key} only. @item nb_beam_del(+@var{Beam}, -@var{Key}, -@var{Value}) @findex nb_beam_del/3 @snindex nb_beam_del/3 @cnindex nb_beam_del/3 Remove element @var{Key}-@var{Value} with smallest @var{Value} in beam @var{Beam}. Fail if the beam is empty. @item nb_beam_peek(+@var{Beam}, -@var{Key}, -@var{Value})) @findex nb_beam_peek/3 @snindex nb_beam_peek/3 @cnindex nb_beam_peek/3 @var{Key}-@var{Value} is the element with smallest @var{Key} in the beam @var{Beam}. Fail if the beam is empty. @item nb_beam_size(+@var{Beam}, -@var{Size}) @findex nb_beam_size/2 @snindex nb_beam_size/2 @cnindex nb_beam_size/2 Unify @var{Size} with the number of elements in the beam @var{Beam}. @item nb_beam_empty(+@var{Beam}) @findex nb_beam_empty/1 @snindex nb_beam_empty/1 @cnindex nb_beam_empty/1 Succeeds if @var{Beam} is empty. @end table @node Ordered Sets, Pseudo Random, Non-Backtrackable Data Structures, Library @section Ordered Sets @cindex ordered set The following ordered set manipulation routines are available once included with the @code{use_module(library(ordsets))} command. An ordered set is represented by a list having unique and ordered elements. Output arguments are guaranteed to be ordered sets, if the relevant inputs are. This is a slightly patched version of Richard O'Keefe's original library. @table @code @item list_to_ord_set(+@var{List}, ?@var{Set}) @findex list_to_ord_set/2 @syindex list_to_ord_set/2 @cnindex list_to_ord_set/2 Holds when @var{Set} is the ordered representation of the set represented by the unordered representation @var{List}. @item merge(+@var{List1}, +@var{List2}, -@var{Merged}) @findex merge/3 @syindex merge/3 @cnindex merge/3 Holds when @var{Merged} is the stable merge of the two given lists. Notice that @code{merge/3} will not remove duplicates, so merging ordered sets will not necessarily result in an ordered set. Use @code{ord_union/3} instead. @item ord_add_element(+@var{Set1}, +@var{Element}, ?@var{Set2}) @findex ord_add_element/3 @syindex ord_add_element/3 @cnindex ord_add_element/3 Inserting @var{Element} in @var{Set1} returns @var{Set2}. It should give exactly the same result as @code{merge(Set1, [Element], Set2)}, but a bit faster, and certainly more clearly. The same as @code{ord_insert/3}. @item ord_del_element(+@var{Set1}, +@var{Element}, ?@var{Set2}) @findex ord_del_element/3 @syindex ord_del_element/3 @cnindex ord_del_element/3 Removing @var{Element} from @var{Set1} returns @var{Set2}. @item ord_disjoint(+@var{Set1}, +@var{Set2}) @findex ord_disjoint/2 @syindex ord_disjoint/2 @cnindex ord_disjoint/2 Holds when the two ordered sets have no element in common. @item ord_member(+@var{Element}, +@var{Set}) @findex ord_member/2 @syindex ord_member/2 @cnindex ord_member/2 Holds when @var{Element} is a member of @var{Set}. @item ord_insert(+@var{Set1}, +@var{Element}, ?@var{Set2}) @findex ord_insert/3 @syindex ord_insert/3 @cnindex ord_insert/3 Inserting @var{Element} in @var{Set1} returns @var{Set2}. It should give exactly the same result as @code{merge(Set1, [Element], Set2)}, but a bit faster, and certainly more clearly. The same as @code{ord_add_element/3}. @item ord_intersect(+@var{Set1}, +@var{Set2}) @findex ord_intersect/2 @syindex ord_intersect/2 @cnindex ord_intersect/2 Holds when the two ordered sets have at least one element in common. @item ord_intersection(+@var{Set1}, +@var{Set2}, ?@var{Intersection}) @findex ord_intersect/3 @syindex ord_intersect/3 @cnindex ord_intersect/3 Holds when Intersection is the ordered representation of @var{Set1} and @var{Set2}. @item ord_intersection(+@var{Set1}, +@var{Set2}, ?@var{Intersection}, ?@var{Diff}) @findex ord_intersect/4 @syindex ord_intersect/4 @cnindex ord_intersect/4 Holds when Intersection is the ordered representation of @var{Set1} and @var{Set2}. @var{Diff} is the difference between @var{Set2} and @var{Set1}. @item ord_seteq(+@var{Set1}, +@var{Set2}) @findex ord_seteq/2 @syindex ord_seteq/2 @cnindex ord_seteq/2 Holds when the two arguments represent the same set. @item ord_setproduct(+@var{Set1}, +@var{Set2}, -@var{Set}) @findex ord_setproduct/3 @syindex ord_setproduct/3 @cnindex ord_setproduct/3 If Set1 and Set2 are ordered sets, Product will be an ordered set of x1-x2 pairs. @item ord_subset(+@var{Set1}, +@var{Set2}) @findex ordsubset/2 @syindex ordsubset/2 @cnindex ordsubset/2 Holds when every element of the ordered set @var{Set1} appears in the ordered set @var{Set2}. @item ord_subtract(+@var{Set1}, +@var{Set2}, ?@var{Difference}) @findex ord_subtract/3 @syindex ord_subtract/3 @cnindex ord_subtract/3 Holds when @var{Difference} contains all and only the elements of @var{Set1} which are not also in @var{Set2}. @item ord_symdiff(+@var{Set1}, +@var{Set2}, ?@var{Difference}) @findex ord_symdiff/3 @syindex ord_symdiff/3 @cnindex ord_symdiff/3 Holds when @var{Difference} is the symmetric difference of @var{Set1} and @var{Set2}. @item ord_union(+@var{Sets}, ?@var{Union}) @findex ord_union/2 @syindex ord_union/2 @cnindex ord_union/2 Holds when @var{Union} is the union of the lists @var{Sets}. @item ord_union(+@var{Set1}, +@var{Set2}, ?@var{Union}) @findex ord_union/3 @syindex ord_union/3 @cnindex ord_union/3 Holds when @var{Union} is the union of @var{Set1} and @var{Set2}. @item ord_union(+@var{Set1}, +@var{Set2}, ?@var{Union}, ?@var{Diff}) @findex ord_union/4 @syindex ord_union/4 @cnindex ord_union/4 Holds when @var{Union} is the union of @var{Set1} and @var{Set2} and @var{Diff} is the difference. @end table @node Pseudo Random, Queues, Ordered Sets, Library @section Pseudo Random Number Integer Generator @cindex pseudo random The following routines produce random non-negative integers in the range 0 .. 2^(w-1) -1, where w is the word size available for integers, e.g. 32 for Intel machines and 64 for Alpha machines. Note that the numbers generated by this random number generator are repeatable. This generator was originally written by Allen Van Gelder and is based on Knuth Vol 2. @table @code @item rannum(-@var{I}) @findex rannum/1 @snindex rannum/1 @cnindex rannum/1 Produces a random non-negative integer @var{I} whose low bits are not all that random, so it should be scaled to a smaller range in general. The integer @var{I} is in the range 0 .. 2^(w-1) - 1. You can use: @example rannum(X) :- yap_flag(max_integer,MI), rannum(R), X is R/MI. @end example to obtain a floating point number uniformly distributed between 0 and 1. @item ranstart @findex ranstart/0 @snindex ranstart/0 @cnindex ranstart/0 Initialize the random number generator using a built-in seed. The @code{ranstart/0} built-in is always called by the system when loading the package. @item ranstart(+@var{Seed}) @findex ranstart/1 @snindex ranstart/1 @cnindex ranstart/1 Initialize the random number generator with user-defined @var{Seed}. The same @var{Seed} always produces the same sequence of numbers. @item ranunif(+@var{Range},-@var{I}) @findex ranunif/2 @snindex ranunif/2 @cnindex ranunif/2 @code{ranunif/2} produces a uniformly distributed non-negative random integer @var{I} over a caller-specified range @var{R}. If range is @var{R}, the result is in 0 .. @var{R}-1. @end table @node Queues, Random, Pseudo Random, Library @section Queues @cindex queue The following queue manipulation routines are available once included with the @code{use_module(library(queues))} command. Queues are implemented with difference lists. @table @code @item make_queue(+@var{Queue}) @findex make_queue/1 @syindex make_queue/1 @cnindex make_queue/1 Creates a new empty queue. It should only be used to create a new queue. @item join_queue(+@var{Element}, +@var{OldQueue}, -@var{NewQueue}) @findex join_queue/3 @syindex join_queue/3 @cnindex join_queue/3 Adds the new element at the end of the queue. @item list_join_queue(+@var{List}, +@var{OldQueue}, -@var{NewQueue}) @findex list_join_queue/3 @syindex list_join_queue/3 @cnindex list_join_queue/3 Ads the new elements at the end of the queue. @item jump_queue(+@var{Element}, +@var{OldQueue}, -@var{NewQueue}) @findex jump_queue/3 @syindex jump_queue/3 @cnindex jump_queue/3 Adds the new element at the front of the list. @item list_jump_queue(+@var{List}, +@var{OldQueue}, +@var{NewQueue}) @findex list_jump_queue/3 @syindex list_jump_queue/3 @cnindex list_jump_queue/3 Adds all the elements of @var{List} at the front of the queue. @item head_queue(+@var{Queue}, ?@var{Head}) @findex head_queue/2 @syindex head_queue/2 @cnindex head_queue/2 Unifies Head with the first element of the queue. @item serve_queue(+@var{OldQueue}, +@var{Head}, -@var{NewQueue}) @findex serve_queue/3 @syindex serve_queue/3 @cnindex serve_queue/3 Removes the first element of the queue for service. @item empty_queue(+@var{Queue}) @findex empty_queue/1 @syindex empty_queue/1 @cnindex empty_queue/1 Tests whether the queue is empty. @item length_queue(+@var{Queue}, -@var{Length}) @findex length_queue/2 @syindex length_queue/2 @cnindex length_queue/2 Counts the number of elements currently in the queue. @item list_to_queue(+@var{List}, -@var{Queue}) @findex list_to_queue/2 @syindex list_to_queue/2 @cnindex list_to_queue/2 Creates a new queue with the same elements as @var{List.} @item queue_to_list(+@var{Queue}, -@var{List}) @findex queue_to_list/2 @syindex queue_to_list/2 @cnindex queue_to_list/2 Creates a new list with the same elements as @var{Queue}. @end table @node Random, Read Utilities, Queues, Library @section Random Number Generator @cindex queue The following random number operations are included with the @code{use_module(library(random))} command. Since YAP-4.3.19 YAP uses the O'Keefe public-domain algorithm, based on the "Applied Statistics" algorithm AS183. @table @code @item getrand(-@var{Key}) @findex getrand/1 @syindex getrand/1 @cnindex getrand/1 Unify @var{Key} with a term of the form @code{rand(X,Y,Z)} describing the current state of the random number generator. @item random(-@var{Number}) @findex random/1 @syindex random/1 @cnindex random/1 Unify @var{Number} with a floating-point number in the range @code{[0...1)}. @item random(+@var{LOW}, +@var{HIGH}, -@var{NUMBER}) @findex random/3 @syindex random/3 @cnindex random/3 Unify @var{Number} with a number in the range @code{[LOW...HIGH)}. If both @var{LOW} and @var{HIGH} are integers then @var{NUMBER} will also be an integer, otherwise @var{NUMBER} will be a floating-point number. @item randseq(+@var{LENGTH}, +@var{MAX}, -@var{Numbers}) @findex randseq/3 @syindex randseq/3 @cnindex randseq/3 Unify @var{Numbers} with a list of @var{LENGTH} unique random integers in the range @code{[1 ...@var{MAX})}. @item randset(+@var{LENGTH}, +@var{MAX}, -@var{Numbers}) @findex randset/3 @syindex randset/3 @cnindex randset/3 Unify @var{Numbers} with an ordered list of @var{LENGTH} unique random integers in the range @code{[1 ...@var{MAX})}. @item setrand(+@var{Key}) @findex setrand/1 @syindex setrand/1 @cnindex setrand/1 Use a term of the form @code{rand(X,Y,Z)} to set a new state for the random number generator. The integer @code{X} must be in the range @code{[1...30269)}, the integer @code{Y} must be in the range @code{[1...30307)}, and the integer @code{Z} must be in the range @code{[1...30323)}. @end table @node Read Utilities, Red-Black Trees, Random, Library @section Read Utilities The @code{readutil} library contains primitives to read lines, files, multiple terms, etc. @table @code @item read_line_to_codes(+@var{Stream}, -@var{Codes}) @findex read_line_to_codes/2 @snindex read_line_to_codes/2 @cnindex read_line_to_codes/2 Read the next line of input from @var{Stream} and unify the result with @var{Codes} @emph{after} the line has been read. A line is ended by a newline character or end-of-file. Unlike @code{read_line_to_codes/3}, this predicate removes trailing newline character. On end-of-file the atom @code{end_of_file} is returned. See also @code{at_end_of_stream/[0,1]}. @item read_line_to_codes(+@var{Stream}, -@var{Codes}, ?@var{Tail}) @findex read_line_to_codes/3 @snindex read_line_to_codes/3 @cnindex read_line_to_codes/3 Diference-list version to read an input line to a list of character codes. Reading stops at the newline or end-of-file character, but unlike @code{read_line_to_codes/2}, the newline is retained in the output. This predicate is especially useful for readine a block of lines upto some delimiter. The following example reads an HTTP header ended by a blank line: @example read_header_data(Stream, Header) :- read_line_to_codes(Stream, Header, Tail), read_header_data(Header, Stream, Tail). read_header_data("\r\n", _, _) :- !. read_header_data("\n", _, _) :- !. read_header_data("", _, _) :- !. read_header_data(_, Stream, Tail) :- read_line_to_codes(Stream, Tail, NewTail), read_header_data(Tail, Stream, NewTail). @end example @item read_stream_to_codes(+@var{Stream}, -@var{Codes}) @findex read_stream_to_codes/3 @snindex read_stream_to_codes/3 @cnindex read_stream_to_codes/3 Read all input until end-of-file and unify the result to @var{Codes}. @item read_stream_to_codes(+@var{Stream}, -@var{Codes}, ?@var{Tail}) @findex read_stream_to_codes/3 @snindex read_stream_to_codes/3 @cnindex read_stream_to_codes/3 Difference-list version of @code{read_stream_to_codes/2}. @item read_file_to_codes(+@var{Spec}, -@var{Codes}, +@var{Options}) @findex read_file_to_codes/3 @snindex read_file_to_codes/3 @cnindex read_file_to_codes/3 Read a file to a list of character codes. Currently ignores @var{Options}. @c @var{Spec} is a @c file-specification for absolute_file_name/3. @var{Codes} is the @c resulting code-list. @var{Options} is a list of options for @c absolute_file_name/3 and open/4. In addition, the option @c \term{tail}{Tail} is defined, forming a difference-list. @item read_file_to_terms(+@var{Spec}, -@var{Terms}, +@var{Options}) @findex read_file_to_terms/3 @snindex read_file_to_terms/3 @cnindex read_file_to_terms/3 Read a file to a list of prolog terms (see read/1). @c @var{Spec} is a @c file-specification for absolute_file_name/3. @var{Terms} is the @c resulting list of Prolog terms. @var{Options} is a list of options for @c absolute_file_name/3 and open/4. In addition, the option @c \term{tail}{Tail} is defined, forming a difference-list. @c \end{description} @end table @node Red-Black Trees, RegExp, Read Utilities, Library @section Red-Black Trees @cindex Red-Black Trees Red-Black trees are balanced search binary trees. They are named because nodes can be classified as either red or black. The code we include is based on "Introduction to Algorithms", second edition, by Cormen, Leiserson, Rivest and Stein. The library includes routines to insert, lookup and delete elements in the tree. @table @code @item rb_new(?@var{T}) @findex rb_new/1 @snindex rb_new/1 @cnindex rb_new/1 Create a new tree. @item rb_empty(?@var{T}) @findex rb_empty/1 @snindex rb_empty/1 @cnindex rb_empty/1 Succeeds if tree @var{T} is empty. @item is_rbtree(+@var{T}) @findex is_rbtree/1 @snindex is_rbtree/1 @cnindex is_rbtree/1 Check whether @var{T} is a valid red-black tree. @item rb_insert(+@var{T0},+@var{Key},?@var{Value},+@var{TF}) @findex rb_insert/4 @snindex rb_insert/4 @cnindex rb_insert/4 Add an element with key @var{Key} and @var{Value} to the tree @var{T0} creating a new red-black tree @var{TF}. Duplicated elements are not allowed. @snindex rb_insert_new/4 @cnindex rb_insert_new/4 Add a new element with key @var{Key} and @var{Value} to the tree @var{T0} creating a new red-black tree @var{TF}. Fails is an element with @var{Key} exists in the tree. @item rb_lookup(+@var{Key},-@var{Value},+@var{T}) @findex rb_lookup/3 @snindex rb_lookup/3 @cnindex rb_lookup/3 Backtrack through all elements with key @var{Key} in the red-black tree @var{T}, returning for each the value @var{Value}. @item rb_lookupall(+@var{Key},-@var{Value},+@var{T}) @findex rb_lookupall/3 @snindex rb_lookupall/3 @cnindex rb_lookupall/3 Lookup all elements with key @var{Key} in the red-black tree @var{T}, returning the value @var{Value}. @item rb_delete(+@var{T},+@var{Key},-@var{TN}) @findex rb_delete/3 @snindex rb_delete/3 @cnindex rb_delete/3 Delete element with key @var{Key} from the tree @var{T}, returning a new tree @var{TN}. @item rb_delete(+@var{T},+@var{Key},-@var{Val},-@var{TN}) @findex rb_delete/4 @snindex rb_delete/4 @cnindex rb_delete/4 Delete element with key @var{Key} from the tree @var{T}, returning the value @var{Val} associated with the key and a new tree @var{TN}. @item rb_del_min(+@var{T},-@var{Key},-@var{Val},-@var{TN}) @findex rb_del_min/4 @snindex rb_del_min/4 @cnindex rb_del_min/4 Delete the least element from the tree @var{T}, returning the key @var{Key}, the value @var{Val} associated with the key and a new tree @var{TN}. @item rb_del_max(+@var{T},-@var{Key},-@var{Val},-@var{TN}) @findex rb_del_max/4 @snindex rb_del_max/4 @cnindex rb_del_max/4 Delete the largest element from the tree @var{T}, returning the key @var{Key}, the value @var{Val} associated with the key and a new tree @var{TN}. @item rb_update(+@var{T},+@var{Key},+@var{NewVal},-@var{TN}) @findex rb_update/4 @snindex rb_update/4 @cnindex rb_update/4 Tree @var{TN} is tree @var{T}, but with value for @var{Key} associated with @var{NewVal}. Fails if it cannot find @var{Key} in @var{T}. @item rb_apply(+@var{T},+@var{Key},+@var{G},-@var{TN}) @findex rb_apply/4 @snindex rb_apply/4 @cnindex rb_apply/4 If the value associated with key @var{Key} is @var{Val0} in @var{T}, and if @code{call(G,Val0,ValF)} holds, then @var{TN} differs from @var{T} only in that @var{Key} is associated with value @var{ValF} in tree @var{TN}. Fails if it cannot find @var{Key} in @var{T}, or if @code{call(G,Val0,ValF)} is not satisfiable. @item rb_visit(+@var{T},-@var{Pairs}) @findex rb_visit/2 @snindex rb_visit/2 @cnindex rb_visit/2 @var{Pairs} is an infix visit of tree @var{T}, where each element of @var{Pairs} is of the form @var{K}-@var{Val}. @item rb_size(+@var{T},-@var{Size}) @findex rb_size/2 @snindex rb_size/2 @cnindex rb_size/2 @var{Size} is the number of elements in @var{T}. @item rb_keys(+@var{T},+@var{Keys}) @findex rb_keys/2 @snindex rb_keys/2 @cnindex rb_keys/2 @var{Keys} is an infix visit with all keys in tree @var{T}. Keys will be sorted, but may be duplicate. @item rb_map(+@var{T},+@var{G},-@var{TN}) @findex rb_map/3 @snindex rb_map/3 @cnindex rb_map/3 For all nodes @var{Key} in the tree @var{T}, if the value associated with key @var{Key} is @var{Val0} in tree @var{T}, and if @code{call(G,Val0,ValF)} holds, then the value associated with @var{Key} in @var{TN} is @var{ValF}. Fails if or if @code{call(G,Val0,ValF)} is not satisfiable for all @var{Var0}. @item rb_partial_map(+@var{T},+@var{Keys},+@var{G},-@var{TN}) @findex rb_partial_map/4 @snindex rb_partial_map/4 @cnindex rb_partial_map/4 For all nodes @var{Key} in @var{Keys}, if the value associated with key @var{Key} is @var{Val0} in tree @var{T}, and if @code{call(G,Val0,ValF)} holds, then the value associated with @var{Key} in @var{TN} is @var{ValF}. Fails if or if @code{call(G,Val0,ValF)} is not satisfiable for all @var{Var0}. Assumes keys are not repeated. @item rb_clone(+@var{T},+@var{NT},+@var{Nodes}) @findex rb_clone/3 @snindex rb_clone/3 @cnindex rb_clone/3 ``Clone'' the red-back tree into a new tree with the same keys as the original but with all values set to unbound values. Nodes is a list containing all new nodes as pairs @var{K-V}. @item rb_min(+@var{T},-@var{Key},-@var{Value}) @findex rb_min/3 @snindex rb_min/3 @cnindex rb_min/3 @var{Key} is the minimum key in @var{T}, and is associated with @var{Val}. @item rb_max(+@var{T},-@var{Key},-@var{Value}) @findex rb_max/3 @snindex rb_max/3 @cnindex rb_max/3 @var{Key} is the maximal key in @var{T}, and is associated with @var{Val}. @item rb_next(+@var{T}, +@var{Key},-@var{Next},-@var{Value}) @findex rb_next/4 @snindex rb_next/4 @cnindex rb_next/4 @var{Next} is the next element after @var{Key} in @var{T}, and is associated with @var{Val}. @item rb_previous(+@var{T}, +@var{Key},-@var{Previous},-@var{Value}) @findex rb_previous/4 @snindex rb_previous/4 @cnindex rb_previous/4 @var{Previous} is the previous element after @var{Key} in @var{T}, and is associated with @var{Val}. @item list_to_rbtree(+@var{L}, -@var{T}) @findex list_to_rbtree/2 @snindex list_to_rbtree/2 @cnindex list_to_rbtree/2 @var{T} is the red-black tree corresponding to the mapping in list @var{L}. @item ord_list_to_rbtree(+@var{L}, -@var{T}) @findex list_to_rbtree/2 @snindex list_to_rbtree/2 @cnindex list_to_rbtree/2 @var{T} is the red-black tree corresponding to the mapping in ordered list @var{L}. @end table @node RegExp, Splay Trees, Red-Black Trees, Library @section Regular Expressions @cindex regular expressions This library includes routines to determine whether a regular expression matches part or all of a string. The routines can also return which parts parts of the string matched the expression or subexpressions of it. This library relies on Henry Spencer's @code{C}-package and is only available in operating systems that support dynamic loading. The @code{C}-code has been obtained from the sources of FreeBSD-4.0 and is protected by copyright from Henry Spencer and from the Regents of the University of California (see the file library/regex/COPYRIGHT for further details). Much of the description of regular expressions below is copied verbatim from Henry Spencer's manual page. A regular expression is zero or more branches, separated by ``|''. It matches anything that matches one of the branches. A branch is zero or more pieces, concatenated. It matches a match for the first, followed by a match for the second, etc. A piece is an atom possibly followed by ``*'', ``+'', or ``?''. An atom followed by ``*'' matches a sequence of 0 or more matches of the atom. An atom followed by ``+'' matches a sequence of 1 or more matches of the atom. An atom followed by ``?'' matches a match of the atom, or the null string. An atom is a regular expression in parentheses (matching a match for the regular expression), a range (see below), ``.'' (matching any single character), ``^'' (matching the null string at the beginning of the input string), ``$'' (matching the null string at the end of the input string), a ``\'' followed by a single character (matching that character), or a single character with no other significance (matching that character). A range is a sequence of characters enclosed in ``[]''. It normally matches any single character from the sequence. If the sequence begins with ``^'', it matches any single character not from the rest of the sequence. If two characters in the sequence are separated by ``-'', this is shorthand for the full list of ASCII characters between them (e.g. ``[0-9]'' matches any decimal digit). To include a literal ``]'' in the sequence, make it the first character (following a possible ``^''). To include a literal ``-'', make it the first or last character. @table @code @item regexp(+@var{RegExp},+@var{String},+@var{Opts}) @findex regexp/3 @snindex regexp/3 @cnindex regexp/3 Match regular expression @var{RegExp} to input string @var{String} according to options @var{Opts}. The options may be: @itemize @bullet @item @code{nocase}: Causes upper-case characters in @var{String} to be treated as lower case during the matching process. @end itemize @item regexp(+@var{RegExp},+@var{String},+@var{Opts},?@var{SubMatchVars}) @findex regexp/4 @snindex regexp/4 @cnindex regexp/4 Match regular expression @var{RegExp} to input string @var{String} according to options @var{Opts}. The variable @var{SubMatchVars} should be originally unbound or a list of unbound variables all will contain a sequence of matches, that is, the head of @var{SubMatchVars} will contain the characters in @var{String} that matched the leftmost parenthesized subexpression within @var{RegExp}, the next head of list will contain the characters that matched the next parenthesized subexpression to the right in @var{RegExp}, and so on. The options may be: @itemize @bullet @item @code{nocase}: Causes upper-case characters in @var{String} to be treated as lower case during the matching process. @item @code{indices}: Changes what is stored in @var{SubMatchVars}. Instead of storing the matching characters from @var{String}, each variable will contain a term of the form @var{IO-IF} giving the indices in @var{String} of the first and last characters in the matching range of characters. @end itemize In general there may be more than one way to match a regular expression to an input string. For example, consider the command @example regexp("(a*)b*","aabaaabb", [], [X,Y]) @end example Considering only the rules given so far, @var{X} and @var{Y} could end up with the values @code{"aabb"} and @code{"aa"}, @code{"aaab"} and @code{"aaa"}, @code{"ab"} and @code{"a"}, or any of several other combinations. To resolve this potential ambiguity @code{regexp} chooses among alternatives using the rule ``first then longest''. In other words, it considers the possible matches in order working from left to right across the input string and the pattern, and it attempts to match longer pieces of the input string before shorter ones. More specifically, the following rules apply in decreasing order of priority: @enumerate @item If a regular expression could match two different parts of an input string then it will match the one that begins earliest. @item If a regular expression contains "|" operators then the leftmost matching sub-expression is chosen. @item In *, +, and ? constructs, longer matches are chosen in preference to shorter ones. @item In sequences of expression components the components are considered from left to right. @end enumerate In the example from above, @code{"(a*)b*"} matches @code{"aab"}: the @code{"(a*)"} portion of the pattern is matched first and it consumes the leading @code{"aa"}; then the @code{"b*"} portion of the pattern consumes the next @code{"b"}. Or, consider the following example: @example regexp("(ab|a)(b*)c", "abc", [], [X,Y,Z]) @end example After this command @var{X} will be @code{"abc"}, @var{Y} will be @code{"ab"}, and @var{Z} will be an empty string. Rule 4 specifies that @code{"(ab|a)"} gets first shot at the input string and Rule 2 specifies that the @code{"ab"} sub-expression is checked before the @code{"a"} sub-expression. Thus the @code{"b"} has already been claimed before the @code{"(b*)"} component is checked and @code{(b*)} must match an empty string. @end table @node Splay Trees, String I/O, RegExp, Library @section Splay Trees @cindex splay trees Splay trees are explained in the paper "Self-adjusting Binary Search Trees", by D.D. Sleator and R.E. Tarjan, JACM, vol. 32, No.3, July 1985, p. 668. They are designed to support fast insertions, deletions and removals in binary search trees without the complexity of traditional balanced trees. The key idea is to allow the tree to become unbalanced. To make up for this, whenever we find a node, we move it up to the top. We use code by Vijay Saraswat originally posted to the Prolog mailing-list. @table @code @item splay_access(-@var{Return},+@var{Key},?@var{Val},+@var{Tree},-@var{NewTree}) @findex splay_access/5 @snindex splay_access/5 @cnindex splay_access/5 If item @var{Key} is in tree @var{Tree}, return its @var{Val} and unify @var{Return} with @code{true}. Otherwise unify @var{Return} with @code{null}. The variable @var{NewTree} unifies with the new tree. @item splay_delete(+@var{Key},?@var{Val},+@var{Tree},-@var{NewTree}) @findex splay_delete/4 @snindex splay_delete/4 @cnindex splay_delete/4 Delete item @var{Key} from tree @var{Tree}, assuming that it is present already. The variable @var{Val} unifies with a value for key @var{Key}, and the variable @var{NewTree} unifies with the new tree. The predicate will fail if @var{Key} is not present. @item splay_init(-@var{NewTree}) @findex splay_init/3 @snindex splay_init/3 @cnindex splay_init/3 Initialize a new splay tree. @item splay_insert(+@var{Key},?@var{Val},+@var{Tree},-@var{NewTree}) @findex splay_insert/4 @snindex splay_insert/4 @cnindex splay_insert/4 Insert item @var{Key} in tree @var{Tree}, assuming that it is not there already. The variable @var{Val} unifies with a value for key @var{Key}, and the variable @var{NewTree} unifies with the new tree. In our implementation, @var{Key} is not inserted if it is already there: rather it is unified with the item already in the tree. @item splay_join(+@var{LeftTree},+@var{RighTree},-@var{NewTree}) @findex splay_join/3 @snindex splay_join/3 @cnindex splay_join/3 Combine trees @var{LeftTree} and @var{RighTree} into a single tree@var{NewTree} containing all items from both trees. This operation assumes that all items in @var{LeftTree} are less than all those in @var{RighTree} and destroys both @var{LeftTree} and @var{RighTree}. @item splay_split(+@var{Key},?@var{Val},+@var{Tree},-@var{LeftTree},-@var{RightTree}) @findex splay_split/5 @snindex splay_split/5 @cnindex splay_split/5 Construct and return two trees @var{LeftTree} and @var{RightTree}, where @var{LeftTree} contains all items in @var{Tree} less than @var{Key}, and @var{RightTree} contains all items in @var{Tree} greater than @var{Key}. This operations destroys @var{Tree}. @end table @node String I/O, System, Splay Trees, Library @section Reading From and Writing To Strings @cindex string I/O From Version 4.3.2 onwards YAP implements SICStus Prolog compatible String I/O. The library allows users to read from and write to a memory buffer as if it was a file. The memory buffer is built from or converted to a string of character codes by the routines in library. Therefore, if one wants to read from a string the string must be fully instantiated before the library built-in opens the string for reading. These commands are available through the @code{use_module(library(charsio))} command. @table @code @item format_to_chars(+@var{Form}, +@var{Args}, -@var{Result}) @findex format_to_chars/3 @syindex format_to_chars/3 @cnindex format_to_chars/3 Execute the built-in procedure @code{format/2} with form @var{Form} and arguments @var{Args} outputting the result to the string of character codes @var{Result}. @item format_to_chars(+@var{Form}, +@var{Args}, -@var{Result0}, -@var{Result}) @findex format_to_chars/4 @syindex format_to_chars/4 @cnindex format_to_chars/4 Execute the built-in procedure @code{format/2} with form @var{Form} and arguments @var{Args} outputting the result to the difference list of character codes @var{Result-Result0}. @item write_to_chars(+@var{Term}, -@var{Result}) @findex write_to_chars/2 @syindex write_to_chars/2 @cnindex write_to_chars/2 Execute the built-in procedure @code{write/1} with argument @var{Term} outputting the result to the string of character codes @var{Result}. @item write_to_chars(+@var{Term}, -@var{Result0}, -@var{Result}) @findex write_to_chars/3 @syindex write_to_chars/3 @cnindex write_to_chars/3 Execute the built-in procedure @code{write/1} with argument @var{Term} outputting the result to the difference list of character codes @var{Result-Result0}. @item atom_to_chars(+@var{Atom}, -@var{Result}) @findex atom_to_chars/2 @syindex atom_to_chars/2 @cnindex atom_to_chars/2 Convert the atom @var{Atom} to the string of character codes @var{Result}. @item atom_to_chars(+@var{Atom}, -@var{Result0}, -@var{Result}) @findex atom_to_chars/3 @syindex atom_to_chars/3 @cnindex atom_to_chars/3 Convert the atom @var{Atom} to the difference list of character codes @var{Result-Result0}. @item number_to_chars(+@var{Number}, -@var{Result}) @findex number_to_chars/2 @syindex number_to_chars/2 @cnindex number_to_chars/2 Convert the number @var{Number} to the string of character codes @var{Result}. @item number_to_chars(+@var{Number}, -@var{Result0}, -@var{Result}) @findex number_to_chars/3 @syindex number_to_chars/3 @cnindex number_to_chars/3 Convert the atom @var{Number} to the difference list of character codes @var{Result-Result0}. @item read_from_chars(+@var{Chars}, -@var{Term}) @findex read_from_chars/2 @syindex read_from_chars/2 @cnindex read_from_chars/2 Parse the list of character codes @var{Chars} and return the result in the term @var{Term}. The character codes to be read must terminate with a dot character such that either (i) the dot character is followed by blank characters; or (ii) the dot character is the last character in the string. @item open_chars_stream(+@var{Chars}, -@var{Stream}) @findex open_chars_stream/2 @syindex open_chars_stream/2 @cnindex open_chars_stream/2 Open the list of character codes @var{Chars} as a stream @var{Stream}. @item with_output_to_chars(?@var{Goal}, -@var{Chars}) @findex with_output_to_chars/2 @syindex with_output_to_chars/2 @cnindex with_output_to_chars/2 Execute goal @var{Goal} such that its standard output will be sent to a memory buffer. After successful execution the contents of the memory buffer will be converted to the list of character codes @var{Chars}. @item with_output_to_chars(?@var{Goal}, ?@var{Chars0}, -@var{Chars}) @findex with_output_to_chars/3 @syindex with_output_to_chars/3 @cnindex with_output_to_chars/3 Execute goal @var{Goal} such that its standard output will be sent to a memory buffer. After successful execution the contents of the memory buffer will be converted to the difference list of character codes @var{Chars-Chars0}. @item with_output_to_chars(?@var{Goal}, -@var{Stream}, ?@var{Chars0}, -@var{Chars}) @findex with_output_to_chars/4 @syindex with_output_to_chars/4 @cnindex with_output_to_chars/4 Execute goal @var{Goal} such that its standard output will be sent to a memory buffer. After successful execution the contents of the memory buffer will be converted to the difference list of character codes @var{Chars-Chars0} and @var{Stream} receives the stream corresponding to the memory buffer. @end table The implementation of the character IO operations relies on three YAP built-ins: @table @code @item charsio:open_mem_read_stream(+@var{String}, -@var{Stream}) Store a string in a memory buffer and output a stream that reads from this memory buffer. @item charsio:open_mem_write_stream(-@var{Stream}) Create a new memory buffer and output a stream that writes to it. @item charsio:peek_mem_write_stream(-@var{Stream}, L0, L) Convert the memory buffer associated with stream @var{Stream} to the difference list of character codes @var{L-L0}. @end table @noindent These built-ins are initialized to belong to the module @code{charsio} in @code{init.yap}. Novel procedures for manipulating strings by explicitly importing these built-ins. YAP does not currently support opening a @code{charsio} stream in @code{append} mode, or seeking in such a stream. @node System, Terms, String I/O, Library @section Calling The Operating System from YAP @cindex Operating System Utilities YAP now provides a library of system utilities compatible with the SICStus Prolog system library. This library extends and to some point replaces the functionality of Operating System access routines. The library includes Unix/Linux and Win32 @code{C} code. They are available through the @code{use_module(library(system))} command. @table @code @item datime(datime(-@var{Year}, -@var{Month}, -@var{DayOfTheMonth}, -@var{Hour}, -@var{Minute}, -@var{Second}) @findex datime/1 @syindex datime/1 @cnindex datime/1 The @code{datime/1} procedure returns the current date and time, with information on @var{Year}, @var{Month}, @var{DayOfTheMonth}, @var{Hour}, @var{Minute}, and @var{Second}. The @var{Hour} is returned on local time. This function uses the WIN32 @code{GetLocalTime} function or the Unix @code{localtime} function. @example ?- datime(X). X = datime(2001,5,28,15,29,46) ? @end example @item mktime(datime(+@var{Year}, +@var{Month}, +@var{DayOfTheMonth}, +@var{Hour}, +@var{Minute}, +@var{Second}), -@var{Seconds}) @findex mktime/2 @snindex mktime/2 @cnindex mktime/2 The @code{mktime/1} procedure returns the number of @var{Seconds} elapsed since 00:00:00 on January 1, 1970, Coordinated Universal Time (UTC). The user provides information on @var{Year}, @var{Month}, @var{DayOfTheMonth}, @var{Hour}, @var{Minute}, and @var{Second}. The @var{Hour} is given on local time. This function uses the WIN32 @code{GetLocalTime} function or the Unix @code{mktime} function. @example ?- mktime(datime(2001,5,28,15,29,46),X). X = 991081786 ? ; @end example @item delete_file(+@var{File}) @findex delete_file/1 @syindex delete_file/1 @cnindex delete_file/1 The @code{delete_file/1} procedure removes file @var{File}. If @var{File} is a directory, remove the directory @emph{and all its subdirectories}. @example ?- delete_file(x). @end example @item delete_file(+@var{File},+@var{Opts}) @findex delete_file/2 @syindex delete_file/2 @cnindex delete_file/2 The @code{delete_file/2} procedure removes file @var{File} according to options @var{Opts}. These options are @code{directory} if one should remove directories, @code{recursive} if one should remove directories recursively, and @code{ignore} if errors are not to be reported. This example is equivalent to using the @code{delete_file/1} predicate: @example ?- delete_file(x, [recursive]). @end example @item directory_files(+@var{Dir},+@var{List}) @findex directory_files/2 @syindex directory_files/2 @cnindex directory_files/2 Given a directory @var{Dir}, @code{directory_files/2} procedures a listing of all files and directories in the directory: @example ?- directory_files('.',L), writeq(L). ['Makefile.~1~','sys.so','Makefile','sys.o',x,..,'.'] @end example The predicates uses the @code{dirent} family of routines in Unix environments, and @code{findfirst} in WIN32. @item file_exists(+@var{File}) @findex file_exists/1 @syindex file_exists/1 @cnindex file_exists/1 The atom @var{File} corresponds to an existing file. @item file_exists(+@var{File},+@var{Permissions}) @findex file_exists/2 @syindex file_exists/2 @cnindex file_exists/2 The atom @var{File} corresponds to an existing file with permissions compatible with @var{Permissions}. YAP currently only accepts for permissions to be described as a number. The actual meaning of this number is Operating System dependent. @item file_property(+@var{File},?@var{Property}) @findex file_property/2 @syindex file_property/2 @cnindex file_property/2 The atom @var{File} corresponds to an existing file, and @var{Property} will be unified with a property of this file. The properties are of the form @code{type(@var{Type})}, which gives whether the file is a regular file, a directory, a fifo file, or of unknown type; @code{size(@var{Size})}, with gives the size for a file, and @code{mod_time(@var{Time})}, which gives the last time a file was modified according to some Operating System dependent timestamp; @code{mode(@var{mode})}, gives the permission flags for the file, and @code{linkto(@var{FileName})}, gives the file pointed to by a symbolic link. Properties can be obtained through backtracking: @example ?- file_property('Makefile',P). P = type(regular) ? ; P = size(2375) ? ; P = mod_time(990826911) ? ; no @end example @item make_directory(+@var{Dir}) @findex make_directory/2 @syindex make_directory/2 @cnindex make_directory/2 Create a directory @var{Dir}. The name of the directory must be an atom. @item rename_file(+@var{OldFile},+@var{NewFile}) @findex rename_file/2 @syindex rename_file/2 @cnindex rename_file/2 Create file @var{OldFile} to @var{NewFile}. This predicate uses the @code{C} built-in function @code{rename}. @item environ(?@var{EnvVar},+@var{EnvValue}) @findex environ/2 @syindex environ/2 @cnindex environ/2 Unify environment variable @var{EnvVar} with its value @var{EnvValue}, if there is one. This predicate is backtrackable in Unix systems, but not currently in Win32 configurations. @example ?- environ('HOME',X). X = 'C:\\cygwin\\home\\administrator' ? @end example @item host_id(-@var{Id}) @findex host_id/1 @syindex host_id/1 @cnindex host_id/1 Unify @var{Id} with an identifier of the current host. YAP uses the @code{hostid} function when available, @item host_name(-@var{Name}) @findex host_name/1 @syindex host_name/1 @cnindex host_name/1 Unify @var{Name} with a name for the current host. YAP uses the @code{hostname} function in Unix systems when available, and the @code{GetComputerName} function in WIN32 systems. @item kill(@var{Id},+@var{SIGNAL}) @findex kill/2 @syindex kill/2 @cnindex kill/2 Send signal @var{SIGNAL} to process @var{Id}. In Unix this predicate is a direct interface to @code{kill} so one can send signals to groups of processes. In WIN32 the predicate is an interface to @code{TerminateProcess}, so it kills @var{Id} indepent of @var{SIGNAL}. @item mktemp(@var{Spec},-@var{File}) @findex mktemp/2 @syindex mktemp/2 @cnindex mktemp/2 Direct interface to @code{mktemp}: given a @var{Spec}, that is a file name with six @var{X} to it, create a file name @var{File}. Use @code{tmpnam/1} instead. @item pid(-@var{Id}) @findex pid/1 @syindex pid/1 @cnindex pid/1 Unify @var{Id} with the process identifier for the current process. An interface to the @t{getpid} function. @item tmpnam(-@var{File}) @findex tmpnam/1 @syindex tmpnam/1 @cnindex tmpnam/1 Interface with @var{tmpnam}: obtain a new, unique file name @var{File}. @item tmp_file(-@var{File}) @findex tmp_file/2 @snindex tmp_file/2 @cnindex tmp_file/2 Create a name for a temporary file. @var{Base} is an user provided identifier for the category of file. The @var{TmpName} is guaranteed to be unique. If the system halts, it will automatically remove all created temporary files. @item exec(+@var{Command},[+@var{InputStream},+@var{OutputStream},+@var{ErrorStream}],-@var{PID}) @findex exec/3 @syindex exec/3 @cnindex exec/3 Execute command @var{Command} with its streams connected to @var{InputStream}, @var{OutputStream}, and @var{ErrorStream}. The process that executes the command is returned as @var{PID}. The command is executed by the default shell @code{bin/sh -c} in Unix. The following example demonstrates the use of @code{exec/3} to send a command and process its output: @example exec(ls,[std,pipe(S),null],P),repeat, get0(S,C), (C = -1, close(S) ! ; put(C)). @end example The streams may be one of standard stream, @code{std}, null stream, @code{null}, or @code{pipe(S)}, where @var{S} is a pipe stream. Note that it is up to the user to close the pipe. @item working_directory(-@var{CurDir},?@var{NextDir}) @findex working_directory/2 @syindex working_directory/2 @cnindex working_directory/2 @c Fetch the current directory at @var{CurDir}. If @var{NextDir} is bound to an atom, make its value the current working directory. @item popen(+@var{Command}, +@var{TYPE}, -@var{Stream}) @findex popen/3 @syindex popen/3 @cnindex popen/3 Interface to the @t{popen} function. It opens a process by creating a pipe, forking and invoking @var{Command} on the current shell. Since a pipe is by definition unidirectional the @var{Type} argument may be @code{read} or @code{write}, not both. The stream should be closed using @code{close/1}, there is no need for a special @code{pclose} command. The following example demonstrates the use of @code{popen/3} to process the output of a command, as @code{exec/3} would do: @example ?- popen(ls,read,X),repeat, get0(X,C), (C = -1, ! ; put(C)). X = 'C:\\cygwin\\home\\administrator' ? @end example The WIN32 implementation of @code{popen/3} relies on @code{exec/3}. @item shell @findex shell/0 @syindex shell/0 @cnindex shell/0 Start a new shell and leave YAP in background until the shell completes. YAP uses the shell given by the environment variable @code{SHELL}. In WIN32 environment YAP will use @code{COMSPEC} if @code{SHELL} is undefined. @item shell(+@var{Command}) @findex shell/1 @syindex shell/1 @cnindex shell/1 Execute command @var{Command} under a new shell. YAP will be in background until the command completes. In Unix environments YAP uses the shell given by the environment variable @code{SHELL} with the option @code{" -c "}. In WIN32 environment YAP will use @code{COMSPEC} if @code{SHELL} is undefined, in this case with the option @code{" /c "}. @item shell(+@var{Command},-@var{Status}) @findex shell/1 @syindex shell/1 @cnindex shell/1 Execute command @var{Command} under a new shell and unify @var{Status} with the exit for the command. YAP will be in background until the command completes. In Unix environments YAP uses the shell given by the environment variable @code{SHELL} with the option @code{" -c "}. In WIN32 environment YAP will use @code{COMSPEC} if @code{SHELL} is undefined, in this case with the option @code{" /c "}. @item sleep(+@var{Time}) @findex sleep/1 @syindex sleep/1 @cnindex sleep/1 Block the current thread for @var{Time} seconds. When YAP is compiled without multi-threading support, this predicate blocks the YAP process. The number of seconds must be a positive number, and it may an integer or a float. The Unix implementation uses @code{usleep} if the number of seconds is below one, and @code{sleep} if it is over a second. The WIN32 implementation uses @code{Sleep} for both cases. @item system @findex system/0 @syindex system/0 @cnindex system/0 Start a new default shell and leave YAP in background until the shell completes. YAP uses @code{/bin/sh} in Unix systems and @code{COMSPEC} in WIN32. @item system(+@var{Command},-@var{Res}) @findex system/2 @syindex system/2 @cnindex system/2 Interface to @code{system}: execute command @var{Command} and unify @var{Res} with the result. @item wait(+@var{PID},-@var{Status}) @findex wait/2 @syindex wait/2 @cnindex wait/2 Wait until process @var{PID} terminates, and return its exits @var{Status}. @end table @node Terms, Tries, System, Library @section Utilities On Terms @cindex utilities on terms The next routines provide a set of commonly used utilities to manipulate terms. Most of these utilities have been implemented in @code{C} for efficiency. They are available through the @code{use_module(library(terms))} command. @table @code @item acyclic_term(?@var{Term}) @findex cyclic_term/1 @syindex cyclic_term/1 @cnindex cyclic_term/1 Succeed if the argument @var{Term} is an acyclic term. @item cyclic_term(?@var{Term}) @findex cyclic_term/1 @syindex cyclic_term/1 @cnindex cyclic_term/1 Succeed if the argument @var{Term} is a cyclic term. @item term_hash(+@var{Term}, ?@var{Hash}) @findex term_hash/2 @syindex term_hash/2 @cnindex term_hash/2 If @var{Term} is ground unify @var{Hash} with a positive integer calculated from the structure of the term. Otherwise the argument @var{Hash} is left unbound. The range of the positive integer is from @code{0} to, but not including, @code{33554432}. @item term_hash(+@var{Term}, +@var{Depth}, +@var{Range}, ?@var{Hash}) @findex term_hash/4 @syindex term_hash/4 @cnindex term_hash/4 Unify @var{Hash} with a positive integer calculated from the structure of the term. The range of the positive integer is from @code{0} to, but not including, @var{Range}. If @var{Depth} is @code{-1} the whole term is considered. Otherwise, the term is considered only up to depth @code{1}, where the constants and the principal functor have depth @code{1}, and an argument of a term with depth @var{I} has depth @var{I+1}. @item term_variables(?@var{Term}, -@var{Variables}) @findex term_variables/2 @syindex term_variables/2 @cnindex term_variables/2 Unify @var{Variables} with a list of all variables in term @var{Term}. @item variant(?@var{Term1}, ?@var{Term2}) @findex variant/2 @syindex variant/2 @cnindex variant/2 Succeed if @var{Term1} and @var{Term2} are variant terms. @item subsumes(?@var{Term1}, ?@var{Term2}) @findex subsumes/2 @syindex subsumes/2 @cnindex subsumes/2 Succeed if @var{Term1} subsumes @var{Term2}. Variables in term @var{Term1} are bound so that the two terms become equal. @item subsumes_chk(?@var{Term1}, ?@var{Term2}) @findex subsumes_chk/2 @syindex subsumes_chk/2 @cnindex subsumes_chk/2 Succeed if @var{Term1} subsumes @var{Term2} but does not bind any variable in @var{Term1}. @item variable_in_term(?@var{Term},?@var{Var}) @findex variable_in_term/2 @snindex variable_in_term/2 @cnindex variable_in_term/2 Succeed if the second argument @var{Var} is a variable and occurs in term @var{Term}. @item unifiable(?@var{Term1}, ?@var{Term2}, -@var{Bindings}) @findex unifiable/3 @syindex unifiable/3 @cnindex unifiable/3 Succeed if @var{Term1} and @var{Term2} are unifiable with substitution @var{Bindings}. @end table @node Tries, Cleanup, Terms, Library @section Trie DataStructure @cindex tries The next routines provide a set of utilities to create and manipulate prefix trees of Prolog terms. Tries were originally proposed to implement tabling in Logic Programming, but can be used for other purposes. The tries will be stored in the Prolog database and can seen as alternative to @code{assert} and @code{record} family of primitives. Most of these utilities have been implemented in @code{C} for efficiency. They are available through the @code{use_module(library(tries))} command. @table @code @item trie_open(-@var{Id}) @findex trie_open/1 @snindex trie_open/1 @cnindex trie_open/2 Open a new trie with identifier @var{Id}. @item trie_close(+@var{Id}) @findex trie_close/1 @snindex trie_close/1 @cnindex trie_close/2 Close trie with identifier @var{Id}. @item trie_close_all @findex trie_close_all/0 @snindex trie_close_all/0 @cnindex trie_close_all/0 Close all available tries. @item trie_mode(?@var{Mode}) @findex trie_mode/1 @snindex trie_mode/1 @cnindex trie_mode/1 Unify @var{Mode} with trie operation mode. Allowed values are either @code{std} (default) or @code{rev}. @item trie_put_entry(+@var{Trie},+@var{Term},-@var{Ref}) @findex trie_put_entry/3 @snindex trie_put_entry/3 @cnindex trie_put_entry/3 Add term @var{Term} to trie @var{Trie}. The handle @var{Ref} gives a reference to the term. @item trie_check_entry(+@var{Trie},+@var{Term},-@var{Ref}) @findex trie_check_entry/3 @snindex trie_check_entry/3 @cnindex trie_check_entry/3 Succeeds if a variant of term @var{Term} is in trie @var{Trie}. An handle @var{Ref} gives a reference to the term. @item trie_get_entry(+@var{Ref},-@var{Term}) @findex trie_get_entry/2 @snindex trie_get_entry/2 @cnindex trie_get_entry/2 Unify @var{Term} with the entry for handle @var{Ref}. @item trie_remove_entry(+@var{Ref}) @findex trie_remove_entry/1 @snindex trie_remove_entry/1 @cnindex trie_remove_entry/1 Remove entry for handle @var{Ref}. @item trie_remove_subtree(+@var{Ref}) @findex trie_remove_subtree/1 @snindex trie_remove_subtree/1 @cnindex trie_remove_subtree/1 Remove subtree rooted at handle @var{Ref}. @item trie_save(+@var{Trie},+@var{FileName}) @findex trie_save/2 @snindex trie_save/2 @cnindex trie_save/2 Dump trie @var{Trie} into file @var{FileName}. @item trie_load(+@var{Trie},+@var{FileName}) @findex trie_load/2 @snindex trie_load/2 @cnindex trie_load/2 Load trie @var{Trie} from the contents of file @var{FileName}. @item trie_stats(-@var{Memory},-@var{Tries},-@var{Entries},-@var{Nodes}) @findex trie_stats/4 @snindex trie_stats/4 @cnindex trie_stats/4 Give generic statistics on tries, including the amount of memory, @var{Memory}, the number of tries, @var{Tries}, the number of entries, @var{Entries}, and the total number of nodes, @var{Nodes}. @item trie_max_stats(-@var{Memory},-@var{Tries},-@var{Entries},-@var{Nodes}) @findex trie_max_stats/4 @snindex trie_max_stats/4 @cnindex trie_max_stats/4 Give maximal statistics on tries, including the amount of memory, @var{Memory}, the number of tries, @var{Tries}, the number of entries, @var{Entries}, and the total number of nodes, @var{Nodes}. @item trie_usage(+@var{Trie},-@var{Entries},-@var{Nodes},-@var{VirtualNodes}) @findex trie_usage/4 @snindex trie_usage/4 @cnindex trie_usage/4 Give statistics on trie @var{Trie}, the number of entries, @var{Entries}, and the total number of nodes, @var{Nodes}, and the number of @var{VirtualNodes}. @item trie_print(+@var{Trie}) @findex trie_print/1 @snindex trie_print/1 @cnindex trie_print/1 Print trie @var{Trie} on standard output. @end table @node Cleanup, Timeout, Tries, Library >>>>>>> 1.211 @section Call Cleanup @cindex cleanup @t{call_cleanup/1} and @t{call_cleanup/2} allow predicates to register code for execution after the call is finished. Predicates can be declared to be @t{fragile} to ensure that @t{call_cleanup} is called for any Goal which needs it. This library is loaded with the @code{use_module(library(cleanup))} command. @table @code @item :- fragile @var{P},....,@var{Pn} @findex fragile @syindex fragile @cnindex fragile Declares the predicate @var{P}=@t{[module:]name/arity} as a fragile predicate, module is optional, default is the current typein_module. Whenever such a fragile predicate is used in a query it will be called through call_cleanup/1. @example :- fragile foo/1,bar:baz/2. @end example @item call_cleanup(+@var{Goal}) @findex call_cleanup/1 @syindex call_cleanup/1 @cnindex call_cleanup/1 Execute goal @var{Goal} within a cleanup-context. Called predicates might register cleanup Goals which are called right after the end of the call to @var{Goal}. Cuts and exceptions inside Goal do not prevent the execution of the cleanup calls. @t{call_cleanup} might be nested. @item call_cleanup(+@var{Goal}, +@var{CleanUpGoal}) @findex call_cleanup/2 @syindex call_cleanup/2 @cnindex call_cleanup/2 This is similar to @t{call_cleanup/1} with an additional @var{CleanUpGoal} which gets called after @var{Goal} is finished. @item on_cleanup(+@var{CleanUpGoal}) @findex on_cleanup/1 @syindex on_cleanup/1 @cnindex on_cleanup/1 Any Predicate might registers a @var{CleanUpGoal}. The @var{CleanUpGoal} is put onto the current cleanup context. All such CleanUpGoals are executed in reverse order of their registration when the surrounding cleanup-context ends. This call will throw an exception if a predicate tries to register a @var{CleanUpGoal} outside of any cleanup-context. @item cleanup_all @findex cleanup_all/0 @syindex cleanup_all/0 @cnindex cleanup_all/0 Calls all pending CleanUpGoals and resets the cleanup-system to an initial state. Should only be used as one of the last calls in the main program. @end table There are some private predicates which could be used in special cases, such as manually setting up cleanup-contexts and registering CleanUpGoals for other than the current cleanup-context. Read the Source Luke. @node Timeout, Trees, Cleanup, Library @section Calls With Timeout @cindex timeout The @t{time_out/3} command relies on the @t{alarm/3} built-in to implement a call with a maximum time of execution. The command is available with the @code{use_module(library(timeout))} command. @table @code @item time_out(+@var{Goal}, +@var{Timeout}, -@var{Result}) @findex time_out/3 @syindex time_out/3 @cnindex time_out/3 Execute goal @var{Goal} with time limited @var{Timeout}, where @var{Timeout} is measured in milliseconds. If the goal succeeds, unify @var{Result} with success. If the timer expires before the goal terminates, unify @var{Result} with @t{timeout}. This command is implemented by activating an alarm at procedure entry. If the timer expires before the goal completes, the alarm will through an exception @var{timeout}. One should note that @code{time_out/3} is not reentrant, that is, a goal called from @code{time_out} should never itself call @t{time_out}. Moreover, @code{time_out/3} will deactivate any previous alarms set by @code{alarm/3} and vice-versa, hence only one of these calls should be used in a program. Last, even though the timer is set in milliseconds, the current implementation relies on @t{alarm/3}, and therefore can only offer precision on the scale of seconds. @end table @node Trees, UGraphs, Timeout, Library @section Updatable Binary Trees @cindex updatable tree The following queue manipulation routines are available once included with the @code{use_module(library(trees))} command. @table @code @item get_label(+@var{Index}, +@var{Tree}, ?@var{Label}) @findex get_label/3 @syindex get_label/3 @cnindex get_label/3 Treats the tree as an array of @var{N} elements and returns the @var{Index}-th. @item list_to_tree(+@var{List}, -@var{Tree}) @findex list_to_tree/2 @syindex list_to_tree/2 @cnindex list_to_tree/2 Takes a given @var{List} of @var{N} elements and constructs a binary @var{Tree}. @item map_tree(+@var{Pred}, +@var{OldTree}, -@var{NewTree}) @findex map_tree/3 @syindex map_tree/3 @cnindex map_tree/3 Holds when @var{OldTree} and @var{NewTree} are binary trees of the same shape and @code{Pred(Old,New)} is true for corresponding elements of the two trees. @item put_label(+@var{Index}, +@var{OldTree}, +@var{Label}, -@var{NewTree}) @findex put_label/4 @syindex put_label/4 @cnindex put_label/4 constructs a new tree the same shape as the old which moreover has the same elements except that the @var{Index}-th one is @var{Label}. @item tree_size(+@var{Tree}, -@var{Size}) @findex tree_size/2 @syindex tree_size/2 @cnindex tree_size/2 Calculates the number of elements in the @var{Tree}. @item tree_to_list(+@var{Tree}, -@var{List}) @findex tree_to_list/2 @syindex tree_to_list/2 @cnindex tree_to_list/2 Is the converse operation to list_to_tree. @end table @node UGraphs, DGraphs, Trees, Library @section Unweighted Graphs @cindex unweighted graphs The following graph manipulation routines are based in code originally written by Richard O'Keefe. The code was then extended to be compatible with the SICStus Prolog ugraphs library. The routines assume directed graphs, undirected graphs may be implemented by using two edges. Graphs are represented in one of two ways: @itemize @bullet @item The P-representation of a graph is a list of (from-to) vertex pairs, where the pairs can be in any old order. This form is convenient for input/output. @item The S-representation of a graph is a list of (vertex-neighbors) pairs, where the pairs are in standard order (as produced by keysort) and the neighbors of each vertex are also in standard order (as produced by sort). This form is convenient for many calculations. @end itemize These built-ins are available once included with the @code{use_module(library(ugraphs))} command. @table @code @item vertices_edges_to_ugraph(+@var{Vertices}, +@var{Edges}, -@var{Graph}) @findex vertices_edges_to_ugraph/3 @syindex vertices_edges_to_ugraph/3 @cnindex vertices_edges_to_ugraph/3 Given a graph with a set of vertices @var{Vertices} and a set of edges @var{Edges}, @var{Graph} must unify with the corresponding s-representation. Note that the vertices without edges will appear in @var{Vertices} but not in @var{Edges}. Moreover, it is sufficient for a vertice to appear in @var{Edges}. @example ?- vertices_edges_to_ugraph([],[1-3,2-4,4-5,1-5],L). L = [1-[3,5],2-[4],3-[],4-[5],5-[]] ? @end example In this case all edges are defined implicitly. The next example shows three unconnected edges: @example ?- vertices_edges_to_ugraph([6,7,8],[1-3,2-4,4-5,1-5],L). L = [1-[3,5],2-[4],3-[],4-[5],5-[],6-[],7-[],8-[]] ? @end example @item vertices(+@var{Graph}, -@var{Vertices}) @findex vertices/2 @syindex vertices/2 @cnindex vertices/2 Unify @var{Vertices} with all vertices appearing in graph @var{Graph}. In the next example: @example ?- vertices([1-[3,5],2-[4],3-[],4-[5],5-[]], V). L = [1,2,3,4,5] @end example @item edges(+@var{Graph}, -@var{Edges}) @findex edges/2 @syindex edges/2 @cnindex edges/2 Unify @var{Edges} with all edges appearing in graph @var{Graph}. In the next example: @example ?- vertices([1-[3,5],2-[4],3-[],4-[5],5-[]], V). L = [1,2,3,4,5] @end example @item add_vertices(+@var{Graph}, +@var{Vertices}, -@var{NewGraph}) @findex add_vertices/3 @syindex add_vertices/3 @cnindex add_vertices/3 Unify @var{NewGraph} with a new graph obtained by adding the list of vertices @var{Vertices} to the graph @var{Graph}. In the next example: @example ?- add_vertices([1-[3,5],2-[4],3-[],4-[5], 5-[],6-[],7-[],8-[]], [0,2,9,10,11], NG). NG = [0-[],1-[3,5],2-[4],3-[],4-[5],5-[], 6-[],7-[],8-[],9-[],10-[],11-[]] @end example @item del_vertices(+@var{Graph}, +@var{Vertices}, -@var{NewGraph}) @findex del_vertices/3 @syindex del_vertices/3 @cnindex del_vertices/3 Unify @var{NewGraph} with a new graph obtained by deleting the list of vertices @var{Vertices} and all the edges that start from or go to a vertex in @var{Vertices} to the graph @var{Graph}. In the next example: @example ?- del_vertices([2,1],[1-[3,5],2-[4],3-[], 4-[5],5-[],6-[],7-[2,6],8-[]],NL). NL = [3-[],4-[5],5-[],6-[],7-[6],8-[]] @end example @item add_edges(+@var{Graph}, +@var{Edges}, -@var{NewGraph}) @findex add_edges/3 @syindex add_edges/3 @cnindex add_edges/3 Unify @var{NewGraph} with a new graph obtained by adding the list of edges @var{Edges} to the graph @var{Graph}. In the next example: @example ?- add_edges([1-[3,5],2-[4],3-[],4-[5],5-[],6-[], 7-[],8-[]],[1-6,2-3,3-2,5-7,3-2,4-5],NL). NL = [1-[3,5,6],2-[3,4],3-[2],4-[5],5-[7],6-[],7-[],8-[]] @end example @item del_edges(+@var{Graph}, +@var{Edges}, -@var{NewGraph}) @findex del_edges/3 @syindex del_edges/3 @cnindex del_edges/3 Unify @var{NewGraph} with a new graph obtained by removing the list of edges @var{Edges} from the graph @var{Graph}. Notice that no vertices are deleted. In the next example: @example ?- del_edges([1-[3,5],2-[4],3-[],4-[5],5-[], 6-[],7-[],8-[]], [1-6,2-3,3-2,5-7,3-2,4-5,1-3],NL). NL = [1-[5],2-[4],3-[],4-[],5-[],6-[],7-[],8-[]] @end example @item transpose(+@var{Graph}, -@var{NewGraph}) @findex transpose/3 @syindex transpose/3 @cnindex transpose/3 Unify @var{NewGraph} with a new graph obtained from @var{Graph} by replacing all edges of the form @var{V1-V2} by edges of the form @var{V2-V1}. The cost is @code{O(|V|^2)}. In the next example: @example ?- transpose([1-[3,5],2-[4],3-[], 4-[5],5-[],6-[],7-[],8-[]], NL). NL = [1-[],2-[],3-[1],4-[2],5-[1,4],6-[],7-[],8-[]] @end example Notice that an undirected graph is its own transpose. @item neighbors(+@var{Vertex}, +@var{Graph}, -@var{Vertices}) @findex neighbors/3 @syindex neighbors/3 @cnindex neighbors/3 Unify @var{Vertices} with the list of neighbors of vertex @var{Vertex} in @var{Graph}. If the vertice is not in the graph fail. In the next example: @example ?- neighbors(4,[1-[3,5],2-[4],3-[], 4-[1,2,7,5],5-[],6-[],7-[],8-[]], NL). NL = [1,2,7,5] @end example @item neighbours(+@var{Vertex}, +@var{Graph}, -@var{Vertices}) @findex neighbours/3 @syindex neighbours/3 @cnindex neighbours/3 Unify @var{Vertices} with the list of neighbours of vertex @var{Vertex} in @var{Graph}. In the next example: @example ?- neighbours(4,[1-[3,5],2-[4],3-[], 4-[1,2,7,5],5-[],6-[],7-[],8-[]], NL). NL = [1,2,7,5] @end example @item complement(+@var{Graph}, -@var{NewGraph}) @findex complement/2 @syindex complement/2 @cnindex complement/2 Unify @var{NewGraph} with the graph complementary to @var{Graph}. In the next example: @example ?- complement([1-[3,5],2-[4],3-[], 4-[1,2,7,5],5-[],6-[],7-[],8-[]], NL). NL = [1-[2,4,6,7,8],2-[1,3,5,6,7,8],3-[1,2,4,5,6,7,8], 4-[3,5,6,8],5-[1,2,3,4,6,7,8],6-[1,2,3,4,5,7,8], 7-[1,2,3,4,5,6,8],8-[1,2,3,4,5,6,7]] @end example @item compose(+@var{LeftGraph}, +@var{RightGraph}, -@var{NewGraph}) @findex compose/3 @syindex compose/3 @cnindex compose/3 Compose the graphs @var{LeftGraph} and @var{RightGraph} to form @var{NewGraph}. In the next example: @example ?- compose([1-[2],2-[3]],[2-[4],3-[1,2,4]],L). L = [1-[4],2-[1,2,4],3-[]] @end example @item top_sort(+@var{Graph}, -@var{Sort}) @findex top_sort/2 @syindex top_sort/2 @cnindex top_sort/2 Generate the set of nodes @var{Sort} as a topological sorting of graph @var{Graph}, if one is possible. In the next example we show how topological sorting works for a linear graph: @example ?- top_sort([_138-[_219],_219-[_139], _139-[]],L). L = [_138,_219,_139] @end example @item top_sort(+@var{Graph}, -@var{Sort0}, -@var{Sort}) @findex top_sort/3 @syindex top_sort/3 @cnindex top_sort/3 Generate the difference list @var{Sort}-@var{Sort0} as a topological sorting of graph @var{Graph}, if one is possible. @item transitive_closure(+@var{Graph}, +@var{Closure}) @findex transitive_closure/2 @syindex transitive_closure/2 @cnindex transitive_closure/2 Generate the graph @var{Closure} as the transitive closure of graph @var{Graph}. In the next example: @example ?- transitive_closure([1-[2,3],2-[4,5],4-[6]],L). L = [1-[2,3,4,5,6],2-[4,5,6],4-[6]] @end example @item reachable(+@var{Node}, +@var{Graph}, -@var{Vertices}) @findex reachable/3 @syindex reachable/3 @cnindex reachable/3 Unify @var{Vertices} with the set of all vertices in graph @var{Graph} that are reachable from @var{Node}. In the next example: @example ?- reachable(1,[1-[3,5],2-[4],3-[],4-[5],5-[]],V). V = [1,3,5] @end example @end table @node DGraphs, UnDGraphs, UGraphs, Library @section Directed Graphs @cindex Efficient Directed Graphs The following graph manipulation routines use the red-black tree library to try to avoid linear-time scans of the graph for all graph operations. Graphs are represented as a red-black tree, where the key is the vertex, and the associated value is a list of vertices reachable from that vertex through an edge (ie, a list of edges). @table @code @item dgraph_new(+@var{Graph}) @findex dgraph_new/1 @snindex dgraph_new/1 @cnindex dgraph_new/1 Create a new directed graph. This operation must be performed before trying to use the graph. @item dgraph_vertices(+@var{Graph}, -@var{Vertices}) @findex dgraph_vertices/2 @snindex dgraph_vertices/2 @cnindex dgraph_vertices/2 Unify @var{Vertices} with all vertices appearing in graph @var{Graph}. @item dgraph_edge(+@var{N1}, +@var{N2}, +@var{Graph}) @findex dgraph_edge/2 @snindex dgraph_edge/2 @cnindex dgraph_edge/2 Edge @var{N1}-@var{N2} is an edge in directed graph @var{Graph}. @item dgraph_edges(+@var{Graph}, -@var{Edges}) @findex dgraph_edges/2 @snindex dgraph_edges/2 @cnindex dgraph_edges/2 Unify @var{Edges} with all edges appearing in graph @var{Graph}. @item dgraph_add_vertices(+@var{Graph}, +@var{Vertices}, -@var{NewGraph}) @findex dgraph_add_vertices/3 @snindex dgraph_add_vertices/3 @cnindex dgraph_add_vertices/3 Unify @var{NewGraph} with a new graph obtained by adding the list of vertices @var{Vertices} to the graph @var{Graph}. @item dgraph_del_vertices(+@var{Vertices}, +@var{Graph}, -@var{NewGraph}) @findex dgraph_del_vertices/3 @syindex dgraph_del_vertices/3 @cnindex dgraph_del_vertices/3 Unify @var{NewGraph} with a new graph obtained by deleting the list of vertices @var{Vertices} and all the edges that start from or go to a vertex in @var{Vertices} to the graph @var{Graph}. @item dgraph_add_edges(+@var{Graph}, +@var{Edges}, -@var{NewGraph}) @findex dgraph_add_edges/3 @snindex dgraph_add_edges/3 @cnindex dgraph_add_edges/3 Unify @var{NewGraph} with a new graph obtained by adding the list of edges @var{Edges} to the graph @var{Graph}. @item dgraph_del_edges(+@var{Graph}, +@var{Edges}, -@var{NewGraph}) @findex dgraph_del_edges/3 @snindex dgraph_del_edges/3 @cnindex dgraph_del_edges/3 Unify @var{NewGraph} with a new graph obtained by removing the list of edges @var{Edges} from the graph @var{Graph}. Notice that no vertices are deleted. @item dgraph_neighbors(+@var{Vertex}, +@var{Graph}, -@var{Vertices}) @findex dgraph_neighbors/3 @snindex dgraph_neighbors/3 @cnindex dgraph_neighbors/3 Unify @var{Vertices} with the list of neighbors of vertex @var{Vertex} in @var{Graph}. If the vertice is not in the graph fail. @item dgraph_neighbours(+@var{Vertex}, +@var{Graph}, -@var{Vertices}) @findex dgraph_neighbours/3 @snindex dgraph_neighbours/3 @cnindex dgraph_neighbours/3 Unify @var{Vertices} with the list of neighbours of vertex @var{Vertex} in @var{Graph}. @item dgraph_complement(+@var{Graph}, -@var{NewGraph}) @findex dgraph_complement/2 @snindex dgraph_complement/2 @cnindex dgraph_complement/2 Unify @var{NewGraph} with the graph complementary to @var{Graph}. @item dgraph_transpose(+@var{Graph}, -@var{Transpose}) @findex dgraph_transpose/2 @snindex dgraph_transpose/2 @cnindex dgraph_transpose/2 Unify @var{NewGraph} with a new graph obtained from @var{Graph} by replacing all edges of the form @var{V1-V2} by edges of the form @var{V2-V1}. @item dgraph_close(+@var{Graph1}, +@var{Graph2}, -@var{ComposedGraph}) @findex dgraph_compose/3 @snindex dgraph_compose/3 @cnindex dgraph_compose/3 Unify @var{ComposedGraph} with a new graph obtained by composing @var{Graph1} and @var{Graph2}, ie, @var{ComposedGraph} has an edge @var{V1-V2} iff there is a @var{V} such that @var{V1-V} in @var{Graph1} and @var{V-V2} in @var{Graph2}. @item dgraph_transitive_closure(+@var{Graph}, -@var{Closure}) @findex dgraph_transitive_closure/2 @snindex dgraph_transitive_closure/2 @cnindex dgraph_transitive_closure/2 Unify @var{Closure} with the transitive closure of graph @var{Graph}. @item dgraph_symmetric_closure(+@var{Graph}, -@var{Closure}) @findex dgraph_symmetric_closure/2 @snindex dgraph_symmetric_closure/2 @cnindex dgraph_symmetric_closure/2 Unify @var{Closure} with the symmetric closure of graph @var{Graph}, that is, if @var{Closure} contains an edge @var{U-V} it must also contain the edge @var{V-U}. @item dgraph_top_sort(+@var{Graph}, -@var{Vertices}) @findex dgraph_top_sort/2 @snindex dgraph_top_sort/2 @cnindex dgraph_top_sort/2 Unify @var{Vertices} with the topological sort of graph @var{Graph}. @item dgraph_to_ugraph(+@var{Graph}, -@var{UGraph}) @findex dgraph_to_ugraph/2 @snindex dgraph_to_ugraph/2 @cnindex dgraph_to_ugraph/2 Unify @var{UGraph} with the representation used by the @var{ugraphs} unweighted graphs library, that is, a list of the form @var{V-Neighbors}, where @var{V} is a node and @var{Neighbors} the nodes children. @item ugraph_to_dgraph( +@var{UGraph}, -@var{Graph}) @findex ugraph_to_dgraph/2 @snindex ugraph_to_dgraph/2 @cnindex ugraph_to_dgraph/2 Unify @var{Graph} with the directed graph obtain from @var{UGraph}, represented in the form used in the @var{ugraphs} unweighted graphs library. @end table @node UnDGraphs, LAM , DGraphs, Library @section Undirected Graphs @cindex undrected graphs The following graph manipulation routines use the red-black tree graph library to implement undirected graphs. Mostly, this is done by having two directed edges per undirected edge. @table @code @item undgraph_new(+@var{Graph}) @findex undgraph_new/1 @snindex undgraph_new/1 @cnindex undgraph_new/1 Create a new directed graph. This operation must be performed before trying to use the graph. @item undgraph_vertices(+@var{Graph}, -@var{Vertices}) @findex undgraph_vertices/2 @snindex undgraph_vertices/2 @cnindex undgraph_vertices/2 Unify @var{Vertices} with all vertices appearing in graph @var{Graph}. @item undgraph_edge(+@var{N1}, +@var{N2}, +@var{Graph}) @findex undgraph_edge/2 @snindex undgraph_edge/2 @cnindex undgraph_edge/2 Edge @var{N1}-@var{N2} is an edge in undirected graph @var{Graph}. @item undgraph_edges(+@var{Graph}, -@var{Edges}) @findex undgraph_edges/2 @snindex undgraph_edges/2 @cnindex undgraph_edges/2 Unify @var{Edges} with all edges appearing in graph @var{Graph}. @item undgraph_add_vertices(+@var{Graph}, +@var{Vertices}, -@var{NewGraph}) @findex undgraph_add_vertices/3 @snindex undgraph_add_vertices/3 @cnindex undgraph_add_vertices/3 Unify @var{NewGraph} with a new graph obtained by adding the list of vertices @var{Vertices} to the graph @var{Graph}. @item undgraph_del_vertices(+@var{Graph}, +@var{Vertices}, -@var{NewGraph}) @findex undgraph_del_vertices/3 @syindex undgraph_del_vertices/3 @cnindex undgraph_del_vertices/3 Unify @var{NewGraph} with a new graph obtained by deleting the list of vertices @var{Vertices} and all the edges that start from or go to a vertex in @var{Vertices} to the graph @var{Graph}. @item undgraph_add_edges(+@var{Graph}, +@var{Edges}, -@var{NewGraph}) @findex undgraph_add_edges/3 @snindex undgraph_add_edges/3 @cnindex undgraph_add_edges/3 Unify @var{NewGraph} with a new graph obtained by adding the list of edges @var{Edges} to the graph @var{Graph}. @item undgraph_del_edges(+@var{Graph}, +@var{Edges}, -@var{NewGraph}) @findex undgraph_del_edges/3 @snindex undgraph_del_edges/3 @cnindex undgraph_del_edges/3 Unify @var{NewGraph} with a new graph obtained by removing the list of edges @var{Edges} from the graph @var{Graph}. Notice that no vertices are deleted. @item undgraph_neighbors(+@var{Vertex}, +@var{Graph}, -@var{Vertices}) @findex undgraph_neighbors/3 @snindex undgraph_neighbors/3 @cnindex undgraph_neighbors/3 Unify @var{Vertices} with the list of neighbors of vertex @var{Vertex} in @var{Graph}. If the vertice is not in the graph fail. @item undgraph_neighbours(+@var{Vertex}, +@var{Graph}, -@var{Vertices}) @findex undgraph_neighbours/3 @snindex undgraph_neighbours/3 @cnindex undgraph_neighbours/3 Unify @var{Vertices} with the list of neighbours of vertex @var{Vertex} in @var{Graph}. @item undgraph_complement(+@var{Graph}, -@var{NewGraph}) @findex undgraph_complement/2 @snindex undgraph_complement/2 @cnindex undgraph_complement/2 Unify @var{NewGraph} with the graph complementary to @var{Graph}. @item dgraph_to_undgraph( +@var{DGraph}, -@var{UndGraph}) @findex dgraph_to_undgraph/2 @snindex dgraph_to_undgraph/2 @cnindex dgraph_to_undgraph/2 Unify @var{UndGraph} with teh undirected graph obtained from the directed graph @var{DGraph}. @end table @node LAM, , UnDGraphs, Library @section LAM @cindex lam This library provides a set of utilities for interfacing with LAM MPI. The following routines are available once included with the @code{use_module(library(lam_mpi))} command. The yap should be invoked using the LAM mpiexec or mpirun commands (see LAM manual for more details). @table @code @item mpi_init @findex mpi_init/0 @snindex mpi_init/0 @cnindex mpi_init/0 Sets up the mpi environment. This predicate should be called before any other MPI predicate. @item mpi_finalize @findex mpi_finalize/0 @snindex mpi_finalize/0 @cnindex mpi_finalize/0 Terminates the MPI execution environment. Every process must call this predicate before exiting. @item mpi_comm_size(-@var{Size}) @findex mpi_comm_size/1 @snindex mpi_comm_size/1 @cnindex mpi_comm_size/1 Unifies @var{Size} with the number of processes in the MPI environment. @item mpi_comm_rank(-@var{Rank}) @findex mpi_comm_rank/1 @snindex mpi_comm_rank/1 @cnindex mpi_comm_rank/1 Unifies @var{Rank} with the rank of the current process in the MPI environment. @item mpi_version(-@var{Major},-@var{Minor}) @findex mpi_version/2 @snindex mpi_version/2 @cnindex mpi_version/2 Unifies @var{Major} and @var{Minor} with, respectively, the major and minor version of the MPI. @item mpi_send(+@var{Data},+@var{Dest},+@var{Tag}) @findex mpi_send/3 @snindex mpi_send/3 @cnindex mpi_send/3 Blocking communication predicate. The message in @var{Data}, with tag @var{Tag}, is sent immediately to the processor with rank @var{Dest}. The predicate succeeds after the message being sent. @item mpi_isend(+@var{Data},+@var{Dest},+@var{Tag},-@var{Handle}) @findex mpi_isend/4 @snindex mpi_isend/4 @cnindex mpi_isend/4 Non blocking communication predicate. The message in @var{Data}, with tag @var{Tag}, is sent whenever possible to the processor with rank @var{Dest}. An @var{Handle} to the message is returned to be used to check for the status of the message, using the @code{mpi_wait} or @code{mpi_test} predicates. Until @code{mpi_wait} is called, the memory allocated for the buffer containing the message is not released. @item mpi_recv(?@var{Source},?@var{Tag},-@var{Data}) @findex mpi_recv/3 @snindex mpi_recv/3 @cnindex mpi_recv/3 Blocking communication predicate. The predicate blocks until a message is received from processor with rank @var{Source} and tag @var{Tag}. The message is placed in @var{Data}. @item mpi_irecv(?@var{Source},?@var{Tag},-@var{Handle}) @findex mpi_irecv/3 @snindex mpi_irecv/3 @cnindex mpi_irecv/3 Non-blocking communication predicate. The predicate returns an @var{Handle} for a message that will be received from processor with rank @var{Source} and tag @var{Tag}. Note that the predicate succeeds immediately, even if no message has been received. The predicate @code{mpi_wait_recv} should be used to obtain the data associated to the handle. @item mpi_wait_recv(?@var{Handle},-@var{Status},-@var{Data}) @findex mpi_wait_recv/3 @snindex mpi_wait_recv/3 @cnindex mpi_wait_recv/3 Completes a non-blocking receive operation. The predicate blocks until a message associated with handle @var{Hanlde} is buffered. The predicate succeeds unifying @var{Status} with the status of the message and @var{Data} with the message itself. @item mpi_test_recv(?@var{Handle},-@var{Status},-@var{Data}) @findex mpi_test_recv/3 @snindex mpi_test_recv/3 @cnindex mpi_test_recv/3 Provides information regarding a handle. If the message associated with handle @var{Hanlde} is buffered then the predicate succeeds unifying @var{Status} with the status of the message and @var{Data} with the message itself. Otherwise, the predicate fails. @item mpi_wait(?@var{Handle},-@var{Status}) @findex mpi_wait/2 @snindex mpi_wait/2 @cnindex mpi_wait/2 Completes a non-blocking operation. If the operation was a @code{mpi_send}, the predicate blocks until the message is buffered or sent by the runtime system. At this point the send buffer is released. If the operation was a @code{mpi_recv}, it waits until the message is copied to the receive buffer. @var{Status} is unified with the status of the message. @item mpi_test(?@var{Handle},-@var{Status}) @findex mpi_test/2 @snindex mpi_test/2 @cnindex mpi_test/2 Provides information regarding the handle @var{Handle}, ie., if a communication operation has been completed. If the operation associate with @var{Hanlde} has been completed the predicate succeeds with the completion status in @var{Status}, otherwise it fails. @item mpi_barrier @findex mpi_barrier/0 @snindex mpi_barrier/0 @cnindex mpi_barrier/0 Collective communication predicate. Performs a barrier synchronization among all processes. Note that a collective communication means that all processes call the same predicate. To be able to use a regular @code{mpi_recv} to receive the messages, one should use @code{mpi_bcast2}. @item mpi_bcast2(+@var{Root}, +@var{Data}) @findex mpi_bcast/2 @snindex mpi_bcast/2 @cnindex mpi_bcast/2 Broadcasts the message @var{Data} from the process with rank @var{Root} to all other processes. @item mpi_bcast3(+@var{Root}, +@var{Data}, +@var{Tag}) @findex mpi_bcast/3 @snindex mpi_bcast/3 @cnindex mpi_bcast/3 Broadcasts the message @var{Data} with tag @var{Tag} from the process with rank @var{Root} to all other processes. @item mpi_ibcast(+@var{Root}, +@var{Data}, +@var{Tag}) @findex mpi_bcast/3 @snindex mpi_bcast/3 @cnindex mpi_bcast/3 Non-blocking operation. Broadcasts the message @var{Data} with tag @var{Tag} from the process with rank @var{Root} to all other processes. @item mpi_gc @findex mpi_gc/0 @snindex mpi_gc/0 @cnindex mpi_gc/0 Attempts to perform garbage collection with all the open handles associated with send and non-blocking broadcasts. For each handle it tests it and the message has been delivered the handle and the buffer are released. @end table @node SWI-Prolog, Extensions, Library, Top @cindex SWI-Prolog @menu SWI-Prolog Emulation Subnodes of SWI-Prolog * Invoking Predicates on all Members of a List :: maplist and friends * Forall :: forall built-in * hProlog and SWI-Prolog Attributed Variables :: Emulating SWI-like attributed variables * SWI-Prolog Global Variables :: Emulating SWI-like attributed variables @end menu @include swi.tex @menu Extensions to Traditional Prolog * Rational Trees:: Working with Rational Trees * Co-routining:: Changing the Execution of Goals * Attributed Variables:: Using attributed Variables * CLPR:: The CLP(R) System * Logtalk:: The Logtalk Object-Oriented system * Threads:: Thread Library * Parallelism:: Running in Or-Parallel * Tabling:: Storing Intermediate Solutions of programs * Low Level Profiling:: Profiling Abstract Machine Instructions * Low Level Tracing:: Tracing at Abstract Machine Level @end menu @node Rational Trees, Co-routining, , Extensions @section Rational Trees Prolog unification is not a complete implementation. For efficiency considerations, Prolog systems do not perform occur checks while unifying terms. As an example, @code{X = a(X)} will not fail but instead will create an infinite term of the form @code{a(a(a(a(a(...)))))}, or @emph{rational tree}. Rational trees are no supported by default in YAP. In previous versions, this was not the default and these terms could easily lead to infinite computation. For example, @code{X = a(X), X = X} would enter an infinite loop. The @code{RATIONAL_TREES} flag improves support for these terms. Internal primitives are now aware that these terms can exist, and will not enter infinite loops. Hence, the previous unification will succeed. Another example, @code{X = a(X), ground(X)} will succeed instead of looping. Other affected built-ins include the term comparison primitives, @code{numbervars/3}, @code{copy_term/2}, and the internal data base routines. The support does not extend to Input/Output routines or to @code{assert/1} YAP does not allow directly reading rational trees, and you need to use @code{write_depth/2} to avoid entering an infinite cycle when trying to write an infinite term. @node Co-routining, Attributed Variables, Rational Trees, Extensions @section Co-routining Prolog uses a simple left-to-right flow of control. It is sometimes convenient to change this control so that goals will only be executed when conditions are fulfilled. This may result in a more "data-driven" execution, or may be necessary to correctly implement extensions such as negation by default. The @code{COROUTINING} flag enables this option. Note that the support for coroutining will in general slow down execution. The following declaration is supported: @table @code @item block/1 The argument to @code{block/1} is a condition on a goal or a conjunction of conditions, with each element separated by commas. Each condition is of the form @code{predname(@var{C1},...,@var{CN})}, where @var{N} is the arity of the goal, and each @var{CI} is of the form @code{-}, if the argument must suspend until the variable is bound, or @code{?}, otherwise. @item wait/1 The argument to @code{wait/1} is a predicate descriptor or a conjunction of these predicates. These predicates will suspend until their first argument is bound. @end table The following primitives are supported: @table @code @item dif(@var{X},@var{Y}) @findex dif/2 @syindex dif/2 @cnindex dif/2 Succeed if the two arguments do not unify. A call to @code{dif/2} will suspend if unification may still succeed or fail, and will fail if they always unify. @item freeze(?@var{X},:@var{G}) @findex freeze/2 @syindex freeze/2 @cnindex freeze/2 Delay execution of goal @var{G} until the variable @var{X} is bound. @item frozen(@var{X},@var{G}) @findex frozen/2 @syindex frozen/2 @cnindex frozen/2 Unify @var{G} with a conjunction of goals suspended on variable @var{X}, or @code{true} if no goal has suspended. @item when(+@var{C},:@var{G}) @findex when/2 @syindex when/2 @cnindex when/2 Delay execution of goal @var{G} until the conditions @var{C} are satisfied. The conditions are of the following form: @table @code @item @var{C1},@var{C2} Delay until both conditions @var{C1} and @var{C2} are satisfied. @item @var{C1};@var{C2} Delay until either condition @var{C1} or condition @var{C2} is satisfied. @item ?=(@var{V1},@var{C2}) Delay until terms @var{V1} and @var{V1} have been unified. @item nonvar(@var{V}) Delay until variable @var{V} is bound. @item ground(@var{V}) Delay until variable @var{V} is ground. @end table Note that @code{when/2} will fail if the conditions fail. @item call_residue(:@var{G},@var{L}) @findex call_residue/2 @syindex call_residue/2 @cnindex call_residue/2 Call goal @var{G}. If subgoals of @var{G} are still blocked, return a list containing these goals and the variables they are blocked in. The goals are then considered as unblocked. The next example shows a case where @code{dif/2} suspends twice, once outside @code{call_residue/2}, and the other inside: @example ?- dif(X,Y), call_residue((dif(X,Y),(X = f(Z) ; Y = f(Z))), L). X = f(Z), L = [[Y]-dif(f(Z),Y)], dif(f(Z),Y) ? ; Y = f(Z), L = [[X]-dif(X,f(Z))], dif(X,f(Z)) ? ; no @end example The system only reports one invocation of @code{dif/2} as having suspended. @end table @node Attributed Variables, CLPR, Co-routining, Extensions @chapter Attributed Variables @cindex attributed variables @menu * Attribute Declarations:: Declaring New Attributes * Attribute Manipulation:: Setting and Reading Attributes * Attributed Unification:: Tuning the Unification Algorithm * Displaying Attributes:: Displaying Attributes in User-Readable Form * Projecting Attributes:: Obtaining the Attributes of Interest * Attribute Examples:: Two Simple Examples of how to use Attributes. @end menu YAP now supports the attributed variables packaged developed at OFAI by Christian Holzbaur. Attributes are a means of declaring that an arbitrary term is a property for a variable. These properties can be updated during forward execution. Moreover, the unification algorithm is aware of attributed variables and will call user defined handlers when trying to unify these variables. Attributed variables provide an elegant abstraction over which one can extend Prolog systems. Their main application so far has been in implementing constraint handlers, such as Holzbaur's CLPQR and Fruewirth and Holzbaur's CHR, but other applications have been proposed in the literature. The command @example | ?- use_module(library(atts)). @end example enables the use of attributed variables. The package provides the following functionality: @itemize @bullet @item Each attribute must be declared first. Attributes are described by a functor and are declared per module. Each Prolog module declares its own sets of attributes. Different modules may have different functors with the same module. @item The built-in @code{put_atts/2} adds or deletes attributes to a variable. The variable may be unbound or may be an attributed variable. In the latter case, YAP discards previous values for the attributes. @item The built-in @code{get_atts/2} can be used to check the values of an attribute associated with a variable. @item The unification algorithm calls the user-defined predicate @t{verify_attributes/3} before trying to bind an attributed variable. Unification will resume after this call. @item The user-defined predicate @t{attribute_goal/2} converts from an attribute to a goal. @item The user-defined predicate @t{project_attributes/2} is used from a set of variables into a set of constraints or goals. One application of @t{project_attributes/2} is in the top-level, where it is used to output the set of floundered constraints at the end of a query. @end itemize @node Attribute Declarations, Attribute Manipulation, , Attributed Variables @section Attribute Declarations Attributes are compound terms associated with a variable. Each attribute has a @emph{name} which is @emph{private} to the module in which the attribute was defined. Variables may have at most one attribute with a name. Attribute names are defined with the following declaration: @cindex attribute declaration @cindex declaration, attribute @findex attribute/1 (declaration) @example :- attribute @var{AttributeSpec}, ..., @var{AttributeSpec}. @end example @noindent where each @var{AttributeSpec} has the form (@var{Name}/@var{Arity}). One single such declaration is allowed per module @var{Module}. Although the YAP module system is predicate based, attributes are local to modules. This is implemented by rewriting all calls to the built-ins that manipulate attributes so that attribute names are preprocessed depending on the module. The @code{user:goal_expansion/3} mechanism is used for this purpose. @node Attribute Manipulation, Attributed Unification, Attribute Declarations, Attributed Variables @section Attribute Manipulation The attribute manipulation predicates always work as follows: @enumerate @item The first argument is the unbound variable associated with attributes, @item The second argument is a list of attributes. Each attribute will be a Prolog term or a constant, prefixed with the @t{+} and @t{-} unary operators. The prefix @t{+} may be dropped for convenience. @end enumerate The following three procedures are available to the user. Notice that these built-ins are rewritten by the system into internal built-ins, and that the rewriting process @emph{depends} on the module on which the built-ins have been invoked. @table @code @item @var{Module}:get_atts(@var{-Var},@var{?ListOfAttributes}) @findex get_atts/2 @syindex get_atts/2 @cnindex get_atts/2 Unify the list @var{?ListOfAttributes} with the attributes for the unbound variable @var{Var}. Each member of the list must be a bound term of the form @code{+(@var{Attribute})}, @code{-(@var{Attribute})} (the @t{kbd} prefix may be dropped). The meaning of @t{+} and @t{-} is: @item +(@var{Attribute}) Unifies @var{Attribute} with a corresponding attribute associated with @var{Var}, fails otherwise. @item -(@var{Attribute}) Succeeds if a corresponding attribute is not associated with @var{Var}. The arguments of @var{Attribute} are ignored. @item @var{Module}:put_atts(@var{-Var},@var{?ListOfAttributes}) @findex put_atts/2 @syindex put_atts/2 @cnindex put_atts/2 Associate with or remove attributes from a variable @var{Var}. The attributes are given in @var{?ListOfAttributes}, and the action depends on how they are prefixed: @item +(@var{Attribute}) Associate @var{Var} with @var{Attribute}. A previous value for the attribute is simply replace (like with @code{set_mutable/2}). @item -(@var{Attribute}) Remove the attribute with the same name. If no such attribute existed, simply succeed. @end table @node Attributed Unification, Displaying Attributes, Attribute Manipulation, Attributed Variables @section Attributed Unification The user-predicate predicate @code{verify_attributes/3} is called when attempting to unify an attributed variable which might have attributes in some @var{Module}. @table @code @item @var{Module}:verify_attributes(@var{-Var}, @var{+Value}, @var{-Goals}) @findex verify_attributes/3 @syindex verify_attributes/3 @cnindex verify_attributes/3 The predicate is called when trying to unify the attributed variable @var{Var} with the Prolog term @var{Value}. Note that @var{Value} may be itself an attributed variable, or may contain attributed variables. The goal @t{verify_attributes/3} is actually called before @var{Var} is unified with @var{Value}. It is up to the user to define which actions may be performed by @t{verify_attributes/3} but the procedure is expected to return in @var{Goals} a list of goals to be called @emph{after} @var{Var} is unified with @var{Value}. If @t{verify_attributes/3} fails, the unification will fail. Notice that the @t{verify_attributes/3} may be called even if @var{Var} has no attributes in module @t{Module}. In this case the routine should simply succeed with @var{Goals} unified with the empty list. @item attvar(@var{-Var}) @findex attvar/1 @snindex attvar/1 @cnindex attvar/1 Succeed if @var{Var} is an attributed variable. @end table @node Displaying Attributes, Projecting Attributes,Attributed Unification, Attributed Variables @section Displaying Attributes Attributes are usually presented as goals. The following routines are used by built-in predicates such as @code{call_residue/2} and by the Prolog top-level to display attributes: @table @code @item @var{Module}:attribute_goal(@var{-Var}, @var{-Goal}) @findex attribute_goal/2 @syindex attribute_goal/2 @cnindex attribute_goal/2 User-defined procedure, called to convert the attributes in @var{Var} to a @var{Goal}. Should fail when no interpretation is available. @item @var{Module}:project_attributes(@var{-QueryVars}, @var{+AttrVars}) @findex project_attributes/2 @syindex project_attributes/2 @cnindex project_attributes/2 User-defined procedure, called to project the attributes in the query, @var{AttrVars}, given that the set of variables in the query is @var{QueryVars}. @end table @node Projecting Attributes, Attribute Examples, Displaying Attributes, Attributed Variables @section Projecting Attributes Constraint solvers must be able to project a set of constraints to a set of variables. This is useful when displaying the solution to a goal, but may also be used to manipulate computations. The user-defined @code{project_attributes/2} is responsible for implementing this projection. @table @code @item @var{Module}:project_attributes(@var{+QueryVars}, @var{+AttrVars}) @findex project_attributes/2 @syindex project_attributes/2 @cnindex project_attributes/2 Given a list of variables @var{QueryVars} and list of attributed variables @var{AttrVars}, project all attributes in @var{AttrVars} to @var{QueryVars}. Although projection is constraint system dependent, typically this will involve expressing all constraints in terms of @var{QueryVars} and considering all remaining variables as existentially quantified. @end table Projection interacts with @code{attribute_goal/2} at the prolog top level. When the query succeeds, the system first calls @code{project_attributes/2}. The system then calls @code{attribute_goal/2} to get a user-level representation of the constraints. Typically, @code{attribute_goal/2} will convert from the original constraints into a set of new constraints on the projection, and these constraints are the ones that will have an @code{attribute_goal/2} handler. @node Attribute Examples, ,Projecting Attributes, Attributed Variables @section Attribute Examples The following two examples example is taken from the SICStus Prolog manual. It sketches the implementation of a simple finite domain ``solver''. Note that an industrial strength solver would have to provide a wider range of functionality and that it quite likely would utilize a more efficient representation for the domains proper. The module exports a single predicate @code{domain(@var{-Var},@var{?Domain})} which associates @var{Domain} (a list of terms) with @var{Var}. A variable can be queried for its domain by leaving @var{Domain} unbound. We do not present here a definition for @code{project_attributes/2}. Projecting finite domain constraints happens to be difficult. @example :- module(domain, [domain/2]). :- use_module(library(atts)). :- use_module(library(ordsets), [ ord_intersection/3, ord_intersect/2, list_to_ord_set/2 ]). :- attribute dom/1. verify_attributes(Var, Other, Goals) :- get_atts(Var, dom(Da)), !, % are we involved? ( var(Other) -> % must be attributed then ( get_atts(Other, dom(Db)) -> % has a domain? ord_intersection(Da, Db, Dc), Dc = [El|Els], % at least one element ( Els = [] -> % exactly one element Goals = [Other=El] % implied binding ; Goals = [], put_atts(Other, dom(Dc))% rescue intersection ) ; Goals = [], put_atts(Other, dom(Da)) % rescue the domain ) ; Goals = [], ord_intersect([Other], Da) % value in domain? ). verify_attributes(_, _, []). % unification triggered % because of attributes % in other modules attribute_goal(Var, domain(Var,Dom)) :- % interpretation as goal get_atts(Var, dom(Dom)). domain(X, Dom) :- var(Dom), !, get_atts(X, dom(Dom)). domain(X, List) :- list_to_ord_set(List, Set), Set = [El|Els], % at least one element ( Els = [] -> % exactly one element X = El % implied binding ; put_atts(Fresh, dom(Set)), X = Fresh % may call % verify_attributes/3 ). @end example Note that the ``implied binding'' @code{Other=El} was deferred until after the completion of @code{verify_attribute/3}. Otherwise, there might be a danger of recursively invoking @code{verify_attribute/3}, which might bind @code{Var}, which is not allowed inside the scope of @code{verify_attribute/3}. Deferring unifications into the third argument of @code{verify_attribute/3} effectively serializes the calls to @code{verify_attribute/3}. Assuming that the code resides in the file @file{domain.yap}, we can use it via: @example | ?- use_module(domain). @end example Let's test it: @example | ?- domain(X,[5,6,7,1]), domain(Y,[3,4,5,6]), domain(Z,[1,6,7,8]). domain(X,[1,5,6,7]), domain(Y,[3,4,5,6]), domain(Z,[1,6,7,8]) ? yes | ?- domain(X,[5,6,7,1]), domain(Y,[3,4,5,6]), domain(Z,[1,6,7,8]), X=Y. Y = X, domain(X,[5,6]), domain(Z,[1,6,7,8]) ? yes | ?- domain(X,[5,6,7,1]), domain(Y,[3,4,5,6]), domain(Z,[1,6,7,8]), X=Y, Y=Z. X = 6, Y = 6, Z = 6 @end example To demonstrate the use of the @var{Goals} argument of @code{verify_attributes/3}, we give an implementation of @code{freeze/2}. We have to name it @code{myfreeze/2} in order to avoid a name clash with the built-in predicate of the same name. @example :- module(myfreeze, [myfreeze/2]). :- use_module(library(atts)). :- attribute frozen/1. verify_attributes(Var, Other, Goals) :- get_atts(Var, frozen(Fa)), !, % are we involved? ( var(Other) -> % must be attributed then ( get_atts(Other, frozen(Fb)) % has a pending goal? -> put_atts(Other, frozen((Fa,Fb))) % rescue conjunction ; put_atts(Other, frozen(Fa)) % rescue the pending goal ), Goals = [] ; Goals = [Fa] ). verify_attributes(_, _, []). attribute_goal(Var, Goal) :- % interpretation as goal get_atts(Var, frozen(Goal)). myfreeze(X, Goal) :- put_atts(Fresh, frozen(Goal)), Fresh = X. @end example Assuming that this code lives in file @file{myfreeze.yap}, we would use it via: @example | ?- use_module(myfreeze). | ?- myfreeze(X,print(bound(x,X))), X=2. bound(x,2) % side effect X = 2 % bindings @end example The two solvers even work together: @example | ?- myfreeze(X,print(bound(x,X))), domain(X,[1,2,3]), domain(Y,[2,10]), X=Y. bound(x,2) % side effect X = 2, % bindings Y = 2 @end example The two example solvers interact via bindings to shared attributed variables only. More complicated interactions are likely to be found in more sophisticated solvers. The corresponding @code{verify_attributes/3} predicates would typically refer to the attributes from other known solvers/modules via the module prefix in @code{@var{Module}:get_atts/2}. @node CLPR, CHR, Attributed Variables, Extensions @cindex CLPQ @cindex CLPR @menu * CLPR Solver Predicates:: * CLPR Syntax:: * CLPR Unification:: * CLPR Non-linear Constraints:: @end menu @include clpr.tex @node CHR, Logtalk, CLPR, Top @menu * CHR Introduction:: * CHR Syntax and Semantics:: * CHR in YAP Programs:: * CHR Debugging:: * CHR Examples:: * CHR Compatibility:: * CHR Guidelines:: @end menu @include chr.tex @node Logtalk, Threads, CHR, Extensions @chapter Logtalk @cindex Logtalk The Logtalk object-oriented extension is available after running its standalone installer by using the @code{yaplgt} command in POSIX systems or by using the @code{Logtalk - YAP} shortcut in the Logtalk program group in the Start Menu on Windows systems. For more information please see the URL @url{http://logtalk.org/}. @node Threads, Parallelism, Logtalk, Extensions @chapter Threads YAP implements a SWI-Prolog compatible multithreading library. Like in SWI-Prolog, Prolog threads have their own stacks and only share the Prolog @emph{heap}: predicates, records, flags and other global non-backtrackable data. The package is based on the POSIX thread standard (Butenhof:1997:PPT) used on most popular systems except for MS-Windows. @comment On Windows it uses the @comment \url[pthread-win32]{http://sources.redhat.com/pthreads-win32/} emulation @comment of POSIX threads mixed with the Windows native API for smoother and @comment faster operation. @menu Subnodes of Threads * Creating and Destroying Prolog Threads:: * Monitoring Threads:: * Thread Communication:: * Thread Synchronisation:: Subnodes of Thread Communication * Message Queues:: * Signalling Threads:: * Threads and Dynamic Predicates:: @end menu @node Creating and Destroying Prolog Threads, Monitoring Threads, ,Threads @section Creating and Destroying Prolog Threads @table @code @item thread_create(:@var{Goal}, -@var{Id}, +@var{Options}) @findex thread_create/3 @snindex thread_create/3 @cnindex thread_create/3 Create a new Prolog thread (and underlying C-thread) and start it by executing @var{Goal}. If the thread is created succesfully, the thread-identifier of the created thread is unified to @var{Id}. @var{Options} is a list of options. Currently defined options are: @table @code @item stack Set the limit in K-Bytes to which the Prolog stacks of this thread may grow. If omited, the limit of the calling thread is used. See also the commandline @code{-S} option. @item trail Set the limit in K-Bytes to which the trail stack of this thread may grow. If omited, the limit of the calling thread is used. See also the commandline option @code{-T}. @item alias Associate an alias-name with the thread. This named may be used to refer to the thread and remains valid until the thread is joined (see @code{thread_join/2}). @item at_exit Define an exit hook for the thread. This hook is called when the thread terminates, no matter its exit status. @item detached If @code{false} (default), the thread can be waited for using @code{thread_join/2}. @code{thread_join/2} must be called on this thread to reclaim the all resources associated to the thread. If @code{true}, the system will reclaim all associated resources automatically after the thread finishes. Please note that thread identifiers are freed for reuse after a detached thread finishes or a normal thread has been joined. See also @code{thread_join/2} and @code{thread_detach/1}. @end table The @var{Goal} argument is @emph{copied} to the new Prolog engine. This implies further instantiation of this term in either thread does not have consequences for the other thread: Prolog threads do not share data from their stacks. @item thread_create(:@var{Goal}, -@var{Id}) @findex thread_create/2 @snindex thread_create/2 @cnindex thread_create/2 Create a new Prolog thread using default options. See @code{thread_create/3}. @item thread_create(:@var{Goal}) @findex thread_create/1 @snindex thread_create/1 @cnindex thread_create/1 Create a new Prolog detached thread using default options. See @code{thread_create/3}. @item thread_self(-@var{Id}) @findex thread_self/1 @snindex thread_self/1 @cnindex thread_self/1 Get the Prolog thread identifier of the running thread. If the thread has an alias, the alias-name is returned. @item thread_join(+@var{Id}, -@var{Status}) @findex thread_join/2 @snindex thread_join/2 @cnindex thread_join/2 Wait for the termination of thread with given @var{Id}. Then unify the result-status of the thread with @var{Status}. After this call, @var{Id} becomes invalid and all resources associated with the thread are reclaimed. Note that threads with the attribute @code{detached} @code{true} cannot be joined. See also @code{current_thread/2}. A thread that has been completed without @code{thread_join/2} being called on it is partly reclaimed: the Prolog stacks are released and the C-thread is destroyed. A small data-structure representing the exit-status of the thread is retained until @code{thread_join/2} is called on the thread. Defined values for @var{Status} are: @table @code @item true The goal has been proven successfully. @item false The goal has failed. @item exception(@var{Term}) The thread is terminated on an exception. See @code{print_message/2} to turn system exceptions into readable messages. @item exited(@var{Term}) The thread is terminated on @code{thread_exit/1} using the argument @var{Term}. @end table @item thread_detach(+@var{Id}) @findex thread_detach/1 @snindex thread_detach/1 @cnindex thread_detach/1 Switch thread into detached-state (see @code{detached} option at @code{thread_create/3} at runtime. @var{Id} is the identifier of the thread placed in detached state. One of the possible applications is to simplify debugging. Threads that are created as @code{detached} leave no traces if they crash. For not-detached threads the status can be inspected using @code{current_thread/2}. Threads nobody is waiting for may be created normally and detach themselves just before completion. This way they leave no traces on normal completion and their reason for failure can be inspected. @item thread_yield @findex thread_yield/0 @snindex thread_yield/0 @cnindex thread_yield/0 Voluntarily relinquish the processor. @item thread_exit(+@var{Term}) @findex thread_exit/1 @snindex thread_exit/1 @cnindex thread_exit/1 Terminates the thread immediately, leaving @code{exited(@var{Term})} as result-state for @code{thread_join/2}. If the thread has the attribute @code{detached} @code{true} it terminates, but its exit status cannot be retrieved using @code{thread_join/2} making the value of @var{Term} irrelevant. The Prolog stacks and C-thread are reclaimed. @item thread_at_exit(:@var{Term}) @findex thread_at_exit/1 @snindex thread_at_exit/1 @cnindex thread_at_exit/1 Run @var{Goal} just before releasing the thread resources. This is to be compared to @code{at_halt/1}, but only for the current thread. These hooks are ran regardless of why the execution of the thread has been completed. As these hooks are run, the return-code is already available through @code{thread_property/2} using the result of @code{thread_self/1} as thread-identifier. If you want to guarantee the execution of an exit hook no matter how the thread terminates (the thread can be aborted before reaching the @code{thread_at_exit/1} call), consider using instead the @code{at_exit/1} option of @code{thread_create/3}. @item thread_setconcurrency(+@var{Old}, -@var{New}) @findex thread_setconcurrency/2 @snindex thread_setconcurrency/2 @cnindex thread_setconcurrency/2 Determine the concurrency of the process, which is defined as the maximum number of concurrently active threads. `Active' here means they are using CPU time. This option is provided if the thread-implementation provides @code{pthread_setconcurrency()}. Solaris is a typical example of this family. On other systems this predicate unifies @var{Old} to 0 (zero) and succeeds silently. @item thread_sleep(+@var{Time}) @findex thread_sleep/1 @snindex thread_sleep/1 @cnindex thread_sleep/1 Make current thread sleep for @var{Time} seconds. @var{Time} may be an integer or a floating point number. When time is zero or a negative value the call succeeds and returns immediately. This call should not be used if alarms are also being used. @end table @node Monitoring Threads, Thread Communication,Creating and Destroying Prolog Threads,Threads @section Monitoring Threads Normal multi-threaded applications should not need these the predicates from this section because almost any usage of these predicates is unsafe. For example checking the existence of a thread before signalling it is of no use as it may vanish between the two calls. Catching exceptions using @code{catch/3} is the only safe way to deal with thread-existence errors. These predicates are provided for diagnosis and monitoring tasks. @table @code @item thread_property(?@var{Id}, ?@var{Property}) @findex thread_property/2 @snindex thread_property/2 @cnindex thread_property/2 Enumerates the properties of the specified thread. Calling @code{thread_property/2} does not influence any thread. See also @code{thread_join/2}. For threads that have an alias-name, this name can be used in @var{Id} instead of the numerical thread identifier. @var{Property} is one of: @table @code @item status(@var{Status}) The thread status of a thread (see below). @item alias(@var{Alias}) The thread alias, if it exists. @item at_exit(@var{AtExit}) The thread exit hook, if defined (not available if the thread is already terminated). @item detached(@var{Boolean}) The detached state of the thread. @item stack(@var{Size}) The thread stack data-area size. @item trail(@var{Size}) The thread trail data-area size. @item system(@var{Size}) The thread system data-area size. @end table @item current_thread(+@var{Id}, -@var{Status}) @findex current_thread/2 @snindex current_thread/2 @cnindex current_thread/2 Enumerates identifiers and status of all currently known threads. Calling @code{current_thread/2} does not influence any thread. See also @code{thread_join/2}. For threads that have an alias-name, this name is returned in @var{Id} instead of the numerical thread identifier. @var{Status} is one of: @table @code @item running The thread is running. This is the initial status of a thread. Please note that threads waiting for something are considered running too. @item false The @var{Goal} of the thread has been completed and failed. @item true The @var{Goal} of the thread has been completed and succeeded. @item exited(@var{Term}) The @var{Goal} of the thread has been terminated using @code{thread_exit/1} with @var{Term} as argument. If the underlying native thread has exited (using pthread_exit()) @var{Term} is unbound. @item exception(@var{Term}) The @var{Goal} of the thread has been terminated due to an uncaught exception (see @code{throw/1} and @code{catch/3}). @end table @item thread_statistics(+@var{Id}, +@var{Key}, -@var{Value}) @findex thread_statistics/3 @snindex thread_statistics/3 @cnindex thread_statistics/3 Obtains statistical information on thread @var{Id} as @code{statistics/2} does in single-threaded applications. This call returns all keys of @code{statistics/2}, although only information statistics about the stacks and CPU time yield different values for each thread. @item mutex_statistics @findex mutex_statistics/0 @snindex mutex_statistics/0 @cnindex mutex_statistics/0 Print usage statistics on internal mutexes and mutexes associated with dynamic predicates. For each mutex two numbers are printed: the number of times the mutex was acquired and the number of collisions: the number times the calling thread has to wait for the mutex. The collistion-count is not available on Windows as this would break portability to Windows-95/98/ME or significantly harm performance. Generally collision count is close to zero on single-CPU hardware. @item threads @findex threads/0 @snindex threads/0 @cnindex threads/0 Prints a table of current threads and their status. @end table @node Thread Communication, Thread Synchronisation, Monitoring Threads, Threads @section Thread communication @menu Subnodes of Thread Communication * Message Queues:: * Signalling Threads:: * Threads and Dynamic Predicates:: @end menu @node Message Queues, Signalling Threads, ,Thread Communication @subsection Message Queues Prolog threads can exchange data using dynamic predicates, database records, and other globally shared data. These provide no suitable means to wait for data or a condition as they can only be checked in an expensive polling loop. @emph{Message queues} provide a means for threads to wait for data or conditions without using the CPU. Each thread has a message-queue attached to it that is identified by the thread. Additional queues are created using @code{message_queue_create/2}. @table @code @item thread_send_message(+@var{Term}) @findex thread_send_message/1 @snindex thread_send_message/1 @cnindex thread_send_message/1 Places @var{Term} in the message-queue of the thread running the goal. Any term can be placed in a message queue, but note that the term is copied to the receiving thread and variable-bindings are thus lost. This call returns immediately. @item thread_send_message(+@var{QueueOrThreadId}, +@var{Term}) @findex thread_send_message/2 @snindex thread_send_message/2 @cnindex thread_send_message/2 Place @var{Term} in the given queue or default queue of the indicated thread (which can even be the message queue of itself (see @code{thread_self/1}). Any term can be placed in a message queue, but note that the term is copied to the receiving thread and variable-bindings are thus lost. This call returns immediately. If more than one thread is waiting for messages on the given queue and at least one of these is waiting with a partially instantiated @var{Term}, the waiting threads are @emph{all} sent a wakeup signal, starting a rush for the available messages in the queue. This behaviour can seriously harm performance with many threads waiting on the same queue as all-but-the-winner perform a useless scan of the queue. If there is only one waiting thread or all waiting threads wait with an unbound variable an arbitrary thread is restarted to scan the queue. @comment \footnote{See the documentation for the POSIX thread functions @comment pthread_cond_signal() v.s.\ pthread_cond_broadcastt() @comment for background information.} @item thread_get_message(?@var{Term}) @findex thread_get_message/1 @snindex thread_get_message/1 @cnindex thread_get_message/1 Examines the thread message-queue and if necessary blocks execution until a term that unifies to @var{Term} arrives in the queue. After a term from the queue has been unified unified to @var{Term}, the term is deleted from the queue and this predicate returns. Please note that not-unifying messages remain in the queue. After the following has been executed, thread 1 has the term @code{gnu} in its queue and continues execution using @var{A} is @code{gnat}. @example thread_get_message(a(A)), thread_send_message(b(gnu)), thread_send_message(a(gnat)), @end example See also @code{thread_peek_message/1}. @item message_queue_create(?@var{Queue}) @findex message_queue_create/1 @snindex message_queue_create/1 @cnindex message_queue_create/1 If @var{Queue} is an atom, create a named queue. To avoid ambiguity on @code{thread_send_message/2}, the name of a queue may not be in use as a thread-name. If @var{Queue} is unbound an anonymous queue is created and @var{Queue} is unified to its identifier. @item message_queue_destroy(+@var{Queue}) @findex message_queue_destroy/1 @snindex message_queue_destroy/1 @cnindex message_queue_destroy/1 Destroy a message queue created with @code{message_queue_create/1}. It is @emph{not} allows to destroy the queue of a thread. Neither is it allowed to destroy a queue other threads are waiting for or, for anynymous message queues, may try to wait for later. @item thread_get_message(+@var{Queue}, ?@var{Term}) @findex thread_get_message/2 @snindex thread_get_message/2 @cnindex thread_get_message/2 As @code{thread_get_message/1}, operating on a given queue. It is allowed to peek into another thread's message queue, an operation that can be used to check whether a thread has swallowed a message sent to it. @item thread_peek_message(?@var{Term}) @findex thread_peek_message/1 @snindex thread_peek_message/1 @cnindex thread_peek_message/1 Examines the thread message-queue and compares the queued terms with @var{Term} until one unifies or the end of the queue has been reached. In the first case the call succeeds (possibly instantiating @var{Term}. If no term from the queue unifies this call fails. @item thread_peek_message(+@var{Queue}, ?@var{Term}) @findex thread_peek_message/2 @snindex thread_peek_message/2 @cnindex thread_peek_message/2 As @code{thread_peek_message/1}, operating on a given queue. It is allowed to peek into another thread's message queue, an operation that can be used to check whether a thread has swallowed a message sent to it. @end table Explicit message queues are designed with the @emph{worker-pool} model in mind, where multiple threads wait on a single queue and pick up the first goal to execute. Below is a simple implementation where the workers execute arbitrary Prolog goals. Note that this example provides no means to tell when all work is done. This must be realised using additional synchronisation. @example % create_workers(+Id, +N) % % Create a pool with given Id and number of workers. create_workers(Id, N) :- message_queue_create(Id), forall(between(1, N, _), thread_create(do_work(Id), _, [])). do_work(Id) :- repeat, thread_get_message(Id, Goal), ( catch(Goal, E, print_message(error, E)) -> true ; print_message(error, goal_failed(Goal, worker(Id))) ), fail. % work(+Id, +Goal) % % Post work to be done by the pool work(Id, Goal) :- thread_send_message(Id, Goal). @end example @node Signalling Threads, Threads and Dynamic Predicates,Message Queues, Thread Communication @subsection Signalling Threads These predicates provide a mechanism to make another thread execute some goal as an @emph{interrupt}. Signalling threads is safe as these interrupts are only checked at safe points in the virtual machine. Nevertheless, signalling in multi-threaded environments should be handled with care as the receiving thread may hold a @emph{mutex} (see @code{with_mutex/2}). Signalling probably only makes sense to start debugging threads and to cancel no-longer-needed threads with @code{throw/1}, where the receiving thread should be designed carefully do handle exceptions at any point. @table @code @item thread_signal(+@var{ThreadId}, :@var{Goal}) @findex thread_signal/2 @snindex thread_signal/2 @cnindex thread_signal/2 Make thread @var{ThreadId} execute @var{Goal} at the first opportunity. In the current implementation, this implies at the first pass through the @emph{Call-port}. The predicate @code{thread_signal/2} itself places @var{Goal} into the signalled-thread's signal queue and returns immediately. Signals (interrupts) do not cooperate well with the world of multi-threading, mainly because the status of mutexes cannot be guaranteed easily. At the call-port, the Prolog virtual machine holds no locks and therefore the asynchronous execution is safe. @var{Goal} can be any valid Prolog goal, including @code{throw/1} to make the receiving thread generate an exception and @code{trace/0} to start tracing the receiving thread. @comment In the Windows version, the receiving thread immediately executes @comment the signal if it reaches a Windows GetMessage() call, which generally @comment happens of the thread is waiting for (user-)input. @end table @node Threads and Dynamic Predicates, , Signalling Threads, Thread Communication @subsection Threads and Dynamic Predicates Besides queues threads can share and exchange data using dynamic predicates. The multi-threaded version knows about two types of dynamic predicates. By default, a predicate declared @emph{dynamic} (see @code{dynamic/1}) is shared by all threads. Each thread may assert, retract and run the dynamic predicate. Synchronisation inside Prolog guarantees the consistency of the predicate. Updates are @emph{logical}: visible clauses are not affected by assert/retract after a query started on the predicate. In many cases primitive from thread synchronysation should be used to ensure application invariants on the predicate are maintained. Besides shared predicates, dynamic predicates can be declared with the @code{thread_local/1} directive. Such predicates share their attributes, but the clause-list is different in each thread. @table @code @item thread_local(@var{+Functor/Arity}) @findex thread_local/1 (directive) @snindex thread_local/1 (directive) @cnindex thread_local/1 (directive) related to the dynamic/1 directive. It tells the system that the predicate may be modified using @code{assert/1}, @code{retract/1}, etc, during execution of the program. Unlike normal shared dynamic data however each thread has its own clause-list for the predicate. As a thread starts, this clause list is empty. If there are still clauses as the thread terminates these are automatically reclaimed by the system. The @code{thread_local} property implies the property @code{dynamic}. Thread-local dynamic predicates are intended for maintaining thread-specific state or intermediate results of a computation. It is not recommended to put clauses for a thread-local predicate into a file as in the example below as the clause is only visible from the thread that loaded the source-file. All other threads start with an empty clause-list. @example :- thread_local foo/1. foo(gnat). @end example @end table @node Thread Synchronisation, , Thread Communication, Threads @section Thread Synchronisation All internal Prolog operations are thread-safe. This implies two Prolog threads can operate on the same dynamic predicate without corrupting the consistency of the predicate. This section deals with user-level @emph{mutexes} (called @emph{monitors} in ADA or @emph{critical-sections} by Microsoft). A mutex is a @emph{MUT}ual @emph{EX}clusive device, which implies at most one thread can @emph{hold} a mutex. Mutexes are used to realise related updates to the Prolog database. With `related', we refer to the situation where a `transaction' implies two or more changes to the Prolog database. For example, we have a predicate @code{address/2}, representing the address of a person and we want to change the address by retracting the old and asserting the new address. Between these two operations the database is invalid: this person has either no address or two addresses, depending on the assert/retract order. Here is how to realise a correct update: @example :- initialization mutex_create(addressbook). change_address(Id, Address) :- mutex_lock(addressbook), retractall(address(Id, _)), asserta(address(Id, Address)), mutex_unlock(addressbook). @end example @table @code @item mutex_create(?@var{MutexId}) @findex mutex_create/1 @snindex mutex_create/1 @cnindex mutex_create/1 Create a mutex. if @var{MutexId} is an atom, a @emph{named} mutex is created. If it is a variable, an anonymous mutex reference is returned. There is no limit to the number of mutexes that can be created. @item mutex_destroy(+@var{MutexId}) @findex mutex_destroy/1 @snindex mutex_destroy/1 @cnindex mutex_destroy/1 Destroy a mutex. After this call, @var{MutexId} becomes invalid and further references yield an @code{existence_error} exception. @item with_mutex(+@var{MutexId}, :@var{Goal}) @findex with_mutex/2 @snindex with_mutex/2 @cnindex with_mutex/2 Execute @var{Goal} while holding @var{MutexId}. If @var{Goal} leaves choicepoints, these are destroyed (as in @code{once/1}). The mutex is unlocked regardless of whether @var{Goal} succeeds, fails or raises an exception. An exception thrown by @var{Goal} is re-thrown after the mutex has been successfully unlocked. See also @code{mutex_create/2}. Although described in the thread-section, this predicate is also available in the single-threaded version, where it behaves simply as @code{once/1}. @item mutex_lock(+@var{MutexId}) @findex mutex_lock/1 @snindex mutex_lock/1 @cnindex mutex_lock/1 Lock the mutex. Prolog mutexes are @emph{recursive} mutexes: they can be locked multiple times by the same thread. Only after unlocking it as many times as it is locked, the mutex becomes available for locking by other threads. If another thread has locked the mutex the calling thread is suspended until to mutex is unlocked. If @var{MutexId} is an atom, and there is no current mutex with that name, the mutex is created automatically using @code{mutex_create/1}. This implies named mutexes need not be declared explicitly. Please note that locking and unlocking mutexes should be paired carefully. Especially make sure to unlock mutexes even if the protected code fails or raises an exception. For most common cases use @code{with_mutex/2}, wich provides a safer way for handling prolog-level mutexes. @item mutex_trylock(+@var{MutexId}) @findex mutex_trylock/1 @snindex mutex_trylock/1 @cnindex mutex_trylock/1 As mutex_lock/1, but if the mutex is held by another thread, this predicates fails immediately. @item mutex_unlock(+@var{MutexId}) @findex mutex_unlock/1 @snindex mutex_unlock/1 @cnindex mutex_unlock/1 Unlock the mutex. This can only be called if the mutex is held by the calling thread. If this is not the case, a @code{permission_error} exception is raised. @item mutex_unlock_all @findex mutex_unlock_all/0 @snindex mutex_unlock_all/0 @cnindex mutex_unlock_all/0 Unlock all mutexes held by the current thread. This call is especially useful to handle thread-termination using @code{abort/0} or exceptions. See also @code{thread_signal/2}. @item current_mutex(?@var{MutexId}, ?@var{ThreadId}, ?@var{Count}) @findex current_mutex/3 @snindex current_mutex/3 @cnindex current_mutex/3 Enumerates all existing mutexes. If the mutex is held by some thread, @var{ThreadId} is unified with the identifier of te holding thread and @var{Count} with the recursive count of the mutex. Otherwise, @var{ThreadId} is @code{[]} and @var{Count} is 0. @end table @node Parallelism, Tabling, Threads, Extensions @chapter Parallelism @cindex parallelism @cindex or-parallelism There has been a sizeable amount of work on an or-parallel implementation for YAP, called @strong{YAPOr}. Most of this work has been performed by Ricardo Rocha. In this system parallelism is exploited implicitly by running several alternatives in or-parallel. This option can be enabled from the @code{configure} script or by checking the system's @code{Makefile}. @strong{YAPOr} is still a very experimental system, going through rapid development. The following restrictions are of note: @itemize @bullet @item @strong{YAPOr} currently only supports the Linux/X86 and SPARC/Solaris platforms. Porting to other Unix-like platforms should be straightforward. @item @strong{YAPOr} does not support parallel updates to the data-base. @item @strong{YAPOr} does not support opening or closing of streams during parallel execution. @item Garbage collection and stack shifting are not supported in @strong{YAPOr}. @item Built-ins that cause side-effects can only be executed when left-most in the search-tree. There are no primitives to provide asynchronous or cavalier execution of these built-ins, as in Aurora or Muse. @item YAP does not support voluntary suspension of work. @end itemize We expect that some of these restrictions will be removed in future releases. @node Tabling, Low Level Tracing, Parallelism , Extensions @chapter Tabling @cindex tabling @strong{YAPTab} is the tabling engine that extends YAP's execution model to support tabled evaluation for definite programs. YAPTab was implemented by Ricardo Rocha and its implementation is largely based on the ground-breaking design of the XSB Prolog system, which implements the SLG-WAM. Tables are implemented using tries and YAPTab supports the dynamic intermixing of batched scheduling and local scheduling at the subgoal level. Currently, the following restrictions are of note: @itemize @bullet @item YAPTab does not handle tabled predicates with loops through negation (undefined behaviour). @item YAPTab does not handle tabled predicates with cuts (undefined behaviour). @item YAPTab does not support coroutining (configure error). @item YAPTab does not support tabling dynamic predicates (permission error). @end itemize To experiment with YAPTab use @code{--enable-tabling} in the configure script or add @code{-DTABLING} to @code{YAP_EXTRAS} in the system's @code{Makefile}. We next describe the set of built-ins predicates designed to interact with YAPTab and control tabled execution: @table @code @item table +@var{P} @findex table/1 @snindex table/1 @cnindex table/1 Declares predicate @var{P} (or a list of predicates @var{P1},...,@var{Pn} or [@var{P1},...,@var{Pn}]) as a tabled predicate. @var{P} must be written in the form @var{name/arity}. Examples: @example :- table son/3. :- table father/2. :- table mother/2. @end example @noindent or @example :- table son/3, father/2, mother/2. @end example @noindent or @example :- table [son/3, father/2, mother/2]. @end example @item is_tabled(+@var{P}) @findex is_tabled/1 @snindex is_tabled/1 @cnindex is_tabled/1 Succeeds if the predicate @var{P} (or a list of predicates @var{P1},...,@var{Pn} or [@var{P1},...,@var{Pn}]), of the form @var{name/arity}, is a tabled predicate. @item tabling_mode(+@var{P},?@var{Mode}) @findex tabling_mode/2 @snindex tabling_mode/2 @cnindex tabling_mode/2 Sets or reads the default tabling mode for a tabled predicate @var{P} (or a list of predicates @var{P1},...,@var{Pn} or [@var{P1},...,@var{Pn}]). The list of @var{Mode} options includes: @table @code @item batched Defines that, by default, batched scheduling is the scheduling strategy to be used to evaluated calls to predicate @var{P}. @item local Defines that, by default, local scheduling is the scheduling strategy to be used to evaluated calls to predicate @var{P}. @item exec_answers Defines that, by default, when a call to predicate @var{P} is already evaluated (completed), answers are obtained by executing compiled WAM-like code directly from the trie data structure. This reduces the loading time when backtracking, but the order in which answers are obtained is undefined. @item load_answers Defines that, by default, when a call to predicate @var{P} is already evaluated (completed), answers are obtained (as a consumer) by loading them from the trie data structure. This guarantees that answers are obtained in the same order as they were found. Somewhat less efficient but creates less choice-points. @end table The default tabling mode for a new tabled predicate is @code{batched} and @code{exec_answers}. To set the tabling mode for all predicates at once you can use the @code{yap_flag/2} predicate as described next. @item yap_flag(tabling_mode,?@var{Mode}) @findex tabling_mode (yap_flag/2 option) Sets or reads the tabling mode for all tabled predicates. The list of @var{Mode} options includes: @table @code @item default Defines that (i) all calls to tabled predicates are evaluated using the predicate default mode, and that (ii) answers for all completed calls are obtained by using the predicate default mode. @item batched Defines that all calls to tabled predicates are evaluated using batched scheduling. This option ignores the default tabling mode of each predicate. @item local Defines that all calls to tabled predicates are evaluated using local scheduling. This option ignores the default tabling mode of each predicate. @item exec_answers Defines that answers for all completed calls are obtained by executing compiled WAM-like code directly from the trie data structure. This option ignores the default tabling mode of each predicate. @item load_answers Defines that answers for all completed calls are obtained by loading them from the trie data structure. This option ignores the default tabling mode of each predicate. @end table @item abolish_table(+@var{P}) @findex abolish_table/1 @snindex abolish_table/1 @cnindex abolish_table/1 Removes all the entries from the table space for predicate @var{P} (or a list of predicates @var{P1},...,@var{Pn} or [@var{P1},...,@var{Pn}]). The predicate remains as a tabled predicate. @item abolish_all_tables/0 @findex abolish_all_tables/0 @snindex abolish_all_tables/0 @cnindex abolish_all_tables/0 Removes all the entries from the table space for all tabled predicates. The predicates remain as tabled predicates. @item show_table(+@var{P}) @findex show_table/1 @snindex show_table/1 @cnindex show_table/1 Prints table contents (subgoals and answers) for predicate @var{P} (or a list of predicates @var{P1},...,@var{Pn} or [@var{P1},...,@var{Pn}]). @item table_statistics(+@var{P}) @findex table_statistics/1 @snindex table_statistics/1 @cnindex table_statistics/1 Prints table statistics (subgoals and answers) for predicate @var{P} (or a list of predicates @var{P1},...,@var{Pn} or [@var{P1},...,@var{Pn}]). @item tabling_statistics/0 @findex tabling_statistics/0 @snindex tabling_statistics/0 @cnindex tabling_statistics/0 Prints statistics on space used by all tables. @end table @node Low Level Tracing, Low Level Profiling, Tabling, Extensions @chapter Tracing at Low Level It is possible to follow the flow at abstract machine level if YAP is compiled with the flag @code{LOW_LEVEL_TRACER}. Note that this option is of most interest to implementers, as it quickly generates an huge amount of information. Low level tracing can be toggled from an interrupt handler by using the option @code{T}. There are also two built-ins that activate and deactivate low level tracing: @table @code @item start_low_level_trace @findex start_low_level_trace/0 @snindex start_low_level_trace/0 @cnindex start_low_level_trace/0 Begin display of messages at procedure entry and retry. @item stop_low_level_trace @findex start_low_level_trace/0 @snindex start_low_level_trace/0 @cnindex start_low_level_trace/0 Stop display of messages at procedure entry and retry. @end table Note that this compile-time option will slow down execution. @node Low Level Profiling, , Low Level Tracing, Extensions @chapter Profiling the Abstract Machine Implementors may be interested in detecting on which abstract machine instructions are executed by a program. The @code{ANALYST} flag can give WAM level information. Note that this option slows down execution very substantially, and is only of interest to developers of the system internals, or to system debuggers. @table @code @item reset_op_counters @findex reset_op_counters/0 @snindex reset_op_counters/0 @cnindex reset_op_counters/0 Reinitialize all counters. @item show_op_counters(+@var{A}) @findex show_op_counters/1 @snindex show_op_counters/1 @cnindex show_op_counters/1 Display the current value for the counters, using label @var{A}. The label must be an atom. @item show_ops_by_group(+@var{A}) @findex show_ops_by_group/1 @snindex show_ops_by_group/1 @cnindex show_ops_by_group/1 Display the current value for the counters, organized by groups, using label @var{A}. The label must be an atom. @end table @node Debugging,Efficiency,Extensions,Top @chapter Debugging @menu * Deb Preds:: Debugging Predicates * Deb Interaction:: Interacting with the debugger @end menu @node Deb Preds, Deb Interaction, , Debugging @section Debugging Predicates The following predicates are available to control the debugging of programs: @table @code @item debug @findex debug/0 @saindex debug/0 @cyindex debug/0 Switches the debugger on. @item debugging @findex debugging/0 @syindex debugging/0 @cyindex debugging/0 Outputs status information about the debugger which includes the leash mode and the existing spy-points, when the debugger is on. @item nodebug @findex nodebug/0 @syindex nodebug/0 @cyindex nodebug/0 Switches the debugger off. @item spy +@var{P} @findex spy/1 @syindex spy/1 @cyindex spy/1 Sets spy-points on all the predicates represented by @var{P}. @var{P} can either be a single specification or a list of specifications. Each one must be of the form @var{Name/Arity} or @var{Name}. In the last case all predicates with the name @var{Name} will be spied. As in C-Prolog, system predicates and predicates written in C, cannot be spied. @item nospy +@var{P} @findex nospy/1 @syindex nospy/1 @cyindex nospy/1 Removes spy-points from all predicates specified by @var{P}. The possible forms for @var{P} are the same as in @code{spy P}. @item nospyall @findex nospyall/0 @syindex nospyall/0 @cnindex nospyall/0 Removes all existing spy-points. @item notrace Switches off the debugger and stops tracing. @item leash(+@var{M}) @findex leash/1 @syindex leash/1 @cyindex leash/1 Sets leashing mode to @var{M}. The mode can be specified as: @table @code @item full prompt on Call, Exit, Redo and Fail @item tight prompt on Call, Redo and Fail @item half prompt on Call and Redo @item loose prompt on Call @item off never prompt @item none never prompt, same as @code{off} @end table @noindent The initial leashing mode is @code{full}. @noindent The user may also specify directly the debugger ports where he wants to be prompted. If the argument for leash is a number @var{N}, each of lower four bits of the number is used to control prompting at one the ports of the box model. The debugger will prompt according to the following conditions: @itemize @bullet @item if @code{N/\ 1 =\= 0} prompt on fail @item if @code{N/\ 2 =\= 0} prompt on redo @item if @code{N/\ 4 =\= 0} prompt on exit @item if @code{N/\ 8 =\= 0} prompt on call @end itemize @noindent Therefore, @code{leash(15)} is equivalent to @code{leash(full)} and @code{leash(0)} is equivalent to @code{leash(off)}. @noindent Another way of using @code{leash} is to give it a list with the names of the ports where the debugger should stop. For example, @code{leash([call,exit,redo,fail])} is the same as @code{leash(full)} or @code{leash(15)} and @code{leash([fail])} might be used instead of @code{leash(1)}. @item spy_write(+@var{Stream},Term) @findex spy_write/2 @snindex spy_write/2 @cnindex spy_write/2 If defined by the user, this predicate will be used to print goals by the debugger instead of @code{write/2}. @item trace @findex trace/0 @syindex trace/0 @cyindex trace/0 Switches on the debugger and starts tracing. @item notrace @findex notrace/0 @syindex notrace/0 @cyindex notrace/0 Ends tracing and exits the debugger. This is the same as @code{nodebug/0}. @end table @node Deb Interaction, , Deb Preds, Debugging @section Interacting with the debugger Debugging with YAP is similar to debugging with C-Prolog. Both systems include a procedural debugger, based on Byrd's four port model. In this model, execution is seen at the procedure level: each activation of a procedure is seen as a box with control flowing into and out of that box. In the four port model control is caught at four key points: before entering the procedure, after exiting the procedure (meaning successful evaluation of all queries activated by the procedure), after backtracking but before trying new alternative to the procedure and after failing the procedure. Each one of these points is named a port: @smallexample @group *--------------------------------------* Call | | Exit ---------> + descendant(X,Y) :- offspring(X,Y). + ---------> | | | descendant(X,Z) :- | <--------- + offspring(X,Y), descendant(Y,Z). + <--------- Fail | | Redo *--------------------------------------* @end group @end smallexample @table @code @item Call The call port is activated before initial invocation of procedure. Afterwards, execution will try to match the goal with the head of existing clauses for the procedure. @item Exit This port is activated if the procedure succeeds. Control will now leave the procedure and return to its ancestor. @item Redo if the goal, or goals, activated after the call port fail then backtracking will eventually return control to this procedure through the redo port. @item Fail If all clauses for this predicate fail, then the invocation fails, and control will try to redo the ancestor of this invocation. @end table To start debugging, the user will either call @code{trace} or spy the relevant procedures, entering debug mode, and start execution of the program. When finding the first spy-point, YAP's debugger will take control and show a message of the form: @example * (1) call: quicksort([1,2,3],_38) ? @end example The debugger message will be shown while creeping, or at spy-points, and it includes four or five fields: @itemize @bullet @item The first three characters are used to point out special states of the debugger. If the port is exit and the first character is '?', the current call is non-deterministic, that is, it still has alternatives to be tried. If the second character is a @code{*}, execution is at a spy-point. If the third character is a @code{>}, execution has returned either from a skip, a fail or a redo command. @item The second field is the activation number, and uniquely identifies the activation. The number will start from 1 and will be incremented for each activation found by the debugger. @item In the third field, the debugger shows the active port. @item The fourth field is the goal. The goal is written by @code{write_term/3} on the standard error stream, using the options given by @code{debugger_print_options}. @end itemize If the active port is leashed, the debugger will prompt the user with a @code{?}, and wait for a command. A debugger command is just a character, followed by a return. By default, only the call and redo entries are leashed, but the @code{leash/1} predicate can be used in order to make the debugger stop where needed. There are several commands available, but the user only needs to remember the help command, which is @code{h}. This command shows all the available options, which are: @table @code @item c - creep this command makes YAP continue execution and stop at the next leashed port. @item return - creep the same as c @item l - leap YAP will execute until it meets a port for a spied predicate; this mode keeps all computation history for debugging purposes, so it is more expensive than standard execution. Use @t{k} or @t{z} for fast execution. @item k - quasi-leap similar to leap but faster since the computation history is not kept; useful when leap becomes too slow. @item z - zip same as @t{k} @item s - skip YAP will continue execution without showing any messages until returning to the current activation. Spy-points will be ignored in this mode. Note that this command keeps all debugging history, use @t{t} for fast execution. This command is meaningless, and therefore illegal, in the fail and exit ports. @item t - fast-skip similar to skip but faster since computation history is not kept; useful if skip becomes slow. @item f [@var{GoalId}] - fail If given no argument, forces YAP to fail the goal, skipping the fail port and backtracking to the parent. If @t{f} receives a goal number as the argument, the command fails all the way to the goal. If goal @var{GoalId} has completed execution, YAP fails until meeting the first active ancestor. @item r [@var{GoalId}] - retry This command forces YAP to jump back call to the port. Note that any side effects of the goal cannot be undone. This command is not available at the call port. If @t{f} receives a goal number as the argument, the command retries goal @var{GoalId} instead. If goal @var{GoalId} has completed execution, YAP fails until meeting the first active ancestor. @item a - abort execution will be aborted, and the interpreter will return to the top-level. YAP disactivates debug mode, but spypoints are not removed. @item n - nodebug stop debugging and continue execution. The command will not clear active spy-points. @item e - exit leave YAP. @item h - help show the debugger commands. @item ! Query execute a query. YAP will not show the result of the query. @item b - break break active execution and launch a break level. This is the same as @code{! break}. @item + - spy this goal start spying the active goal. The same as @code{! spy G} where @var{G} is the active goal. @item - - nospy this goal stop spying the active goal. The same as @code{! nospy G} where @var{G} is the active goal. @item p - print shows the active goal using print/1 @item d - display shows the active goal using display/1 @item next_solution = YAP_MkIntTerm(0); return continue_n100(); @} if(!YAP_IsIntTerm(t) || YAP_IntOfTerm(t)<0 || YAP_IntOfTerm(t)>100) @{ YAP_cut_fail(); @} else @{ YAP_cut_succeed(); @} @} @end example The routine starts by getting the dereference value of the argument. The call to @code{YAP_PRESERVE_DATA} is used to initialize the memory which will hold the information to be preserved across backtracking. The first argument is the variable we shall use, and the second its type. Note that we can only use @code{YAP_PRESERVE_DATA} once, so often we will want the variable to be a structure. If the argument of the predicate is a variable, the routine initializes the structure to be preserved across backtracking with the information required to provide the next solution, and exits by calling @code{ continue_n100} to provide that solution. If the argument was not a variable, the routine then checks if it was an integer, and if so, if its value is positive and less than 100. In that case it exits, denoting success, with @code{YAP_cut_succeed}, or otherwise exits with @code{YAP_cut_fail} denoting failure. The reason for using for using the functions @code{YAP_cut_succeed} and @code{YAP_cut_fail} instead of just returning a non-zero value in the first case, and zero in the second case, is that otherwise, if backtracking occurred later, the routine @code{continue_n100} would be called to provide additional solutions. The code required for the second function is @example static int continue_n100(void) @{ int n; YAP_Term t; YAP_Term sol = YAP_ARG1; YAP_PRESERVED_DATA(n100_data,n100_data_type); n = YAP_IntOfTerm(n100_data->next_solution); if( n == 100) @{ t = YAP_MkIntTerm(n); YAP_Unify(sol,t); YAP_cut_succeed(); @} else @{ YAP_Unify(sol,n100_data->next_solution); n100_data->next_solution = YAP_MkIntTerm(n+1); return(TRUE); @} @} @end example Note that again the macro @code{YAP_PRESERVED_DATA} is used at the beginning of the function to access the data preserved from the previous solution. Then it checks if the last solution was found and in that case exits with @code{YAP_cut_succeed} in order to cut any further backtracking. If this is not the last solution then we save the value for the next solution in the data structure and exit normally with 1 denoting success. Note also that in any of the two cases we use the function @code{YAP_unify} to bind the argument of the call to the value saved in @code{ n100_state->next_solution}. Note also that the only correct way to signal failure in a backtrackable predicate is to use the @code{YAP_cut_fail} macro. Backtrackable predicates should be declared to YAP, in a way similar to what happened with deterministic ones, but using instead a call to @example void YAP_UserBackCPredicate(char *@var{name}, int *@var{init}(), int *@var{cont}(), unsigned long int @var{arity}, unsigned int @var{sizeof}); @end example @noindent where @var{name} is a string with the name of the predicate, @var{init} and @var{cont} are the C functions used to start and continue the execution of the predicate, @var{arity} is the predicate arity, and @var{sizeof} is the size of the data to be preserved in the stack. In this example, we would have something like @example void init_n100(void) @{ YAP_UserBackCPredicate("n100", start_n100, continue_n100, 1, 1); @} @end example @node Loading Objects, Save&Rest, Writing C, C-Interface @section Loading Object Files The primitive predicate @example load_foreign_files(@var{Files},@var{Libs},@var{InitRoutine}) @end example @noindent should be used, from inside YAP, to load object files produced by the C compiler. The argument @var{ObjectFiles} should be a list of atoms specifying the object files to load, @var{Libs} is a list (possibly empty) of libraries to be passed to the unix loader (@code{ld}) and InitRoutine is the name of the C routine (to be called after the files are loaded) to perform the necessary declarations to YAP of the predicates defined in the files. YAP will search for @var{ObjectFiles} in the current directory first. If it cannot find them it will search for the files using the environment variable @code{YAPLIBDIR}, if defined, or in the default library. In a.out systems YAP by default only reserves a fixed amount of memory for object code (64 Kbytes in the current version). Should this size prove inadequate the flag @code{-c n} can be passed to YAP (in the command line invoking YAP) to force the allocation of @code{n} Kbytes. @node Save&Rest, YAP4 Notes, Loading Objects, C-Interface @section Saving and Restoring @comment The primitive predicates @code{save} and @code{restore} will save and restore @comment object code loaded with @code{load_foreign_files}. However, the values of @comment any non-static data created by the C files loaded will not be saved nor @comment restored. YAP4 currently does not support @code{save} and @code{restore} for object code loaded with @code{load_foreign_files}. We plan to support save and restore in future releases of YAP. @node YAP4 Notes, , Save&Rest, C-Interface @section Changes to the C-Interface in YAP4 YAP4 includes several changes over the previous @code{load_foreign_files} interface. These changes were required to support the new binary code formats, such as ELF used in Solaris2 and Linux. @itemize @bullet @item All Names of YAP objects now start with @var{YAP_}. This is designed to avoid clashes with other code. Use @code{YAPInterface.h} to take advantage of the new interface. @code{c_interface.h} is still available if you cannot port the code to the new interface. @item Access to elements in the new interface always goes through @emph{functions}. This includes access to the argument registers, @code{YAP_ARG1} to @code{YAP_ARG16}. This change breaks code such as @code{unify(&ARG1,&t)}, which is nowadays: @example @{ YAP_Unify(ARG1, t); @} @end example @item @code{cut_fail()} and @code{cut_succeed()} are now functions. @item The use of @code{Deref} is deprecated. All functions that return Prolog terms, including the ones that access arguments, already dereferenciate their arguments. @item Space allocated with PRESERVE_DATA is ignored by garbage collection and stack shifting. As a result, any pointers to a Prolog stack object, including some terms, may be corrupted after garbage collection or stack shifting. Prolog terms should instead be stored as arguments to the backtrackable procedure. @end itemize @node YAPLibrary, Compatibility, C-Interface, Top @chapter Using YAP as a Library YAP can be used as a library to be called from other programs. To do so, you must first create the YAP library: @example make library make install_library @end example This will install a file @code{libyap.a} in @var{LIBDIR} and the Prolog headers in @var{INCLUDEDIR}. The library contains all the functionality available in YAP, except the foreign function loader and for @code{YAP}'s startup routines. To actually use this library you must follow a five step process: @enumerate @item You must initialize the YAP environment. A single function, @code{YAP_FastInit} asks for a contiguous chunk in your memory space, fills it in with the data-base, and sets up YAP's stacks and execution registers. You can use a saved space from a standard system by calling @code{save_program/1}. @item You then have to prepare a query to give to YAP. A query is a Prolog term, and you just have to use the same functions that are available in the C-interface. @item You can then use @code{YAP_RunGoal(query)} to actually evaluate your query. The argument is the query term @code{query}, and the result is 1 if the query succeeded, and 0 if it failed. @item You can use the term destructor functions to check how arguments were instantiated. @item If you want extra solutions, you can use @code{YAP_RestartGoal()} to obtain the next solution. @end enumerate The next program shows how to use this system. We assume the saved program contains two facts for the procedure @t{b}: @example @cartouche #include #include "YAP/YAPInterface.h" int main(int argc, char *argv[]) @{ if (YAP_FastInit("saved_state") == YAP_BOOT_ERROR) exit(1); if (YAP_RunGoal(YAP_MkAtomTerm(YAP_LookupAtom("do")))) @{ printf("Success\n"); while (YAP_RestartGoal()) printf("Success\n"); @} printf("NO\n"); @} @end cartouche @end example The program first initializes YAP, calls the query for the first time and succeeds, and then backtracks twice. The first time backtracking succeeds, the second it fails and exits. To compile this program it should be sufficient to do: @example cc -o exem -I../YAP4.3.0 test.c -lYAP -lreadline -lm @end example You may need to adjust the libraries and library paths depending on the Operating System and your installation of YAP. Note that YAP4.3.0 provides the first version of the interface. The interface may change and improve in the future. The following C-functions are available from YAP: @itemize @bullet @item YAP_CompileClause(@code{YAP_Term} @var{Clause}) @findex YAP_CompileClause/1 Compile the Prolog term @var{Clause} and assert it as the last clause for the corresponding procedure. @item @code{int} YAP_ContinueGoal(@code{void}) @findex YAP_ContinueGoal/0 Continue execution from the point where it stopped. @item @code{void} YAP_Error(@code{int} @var{ID},@code{YAP_Term} @var{Cause},@code{char *} @var{error_description}) @findex YAP_Error/1 Generate an YAP System Error with description given by the string @var{error_description}. @var{ID} is the error ID, if known, or @code{0}. @var{Cause} is the term that caused the crash. @item @code{void} YAP_Exit(@code{int} @var{exit_code}) @findex YAP_Exit/1 Exit YAP immediately. The argument @var{exit_code} gives the error code and is supposed to be 0 after successful execution in Unix and Unix-like systems. @item @code{YAP_Term} YAP_GetValue(@code{Atom} @var{at}) @findex YAP_GetValue/1 Return the term @var{value} associated with the atom @var{at}. If no such term exists the function will return the empty list. @item YAP_FastInit(@code{char *} @var{SavedState}) @findex YAP_FastInit/1 Initialize a copy of YAP from @var{SavedState}. The copy is monolithic and currently must be loaded at the same address where it was saved. @code{YAP_FastInit} is a simpler version of @code{YAP_Init}. @item YAP_Init(@var{InitInfo}) @findex YAP_Init/1 Initialize YAP. The arguments are in a @code{C} structure of type @code{YAP_init_args}. The fields of @var{InitInfo} are @code{char *} @var{SavedState}, @code{int} @var{HeapSize}, @code{int} @var{StackSize}, @code{int} @var{TrailSize}, @code{int} @var{NumberofWorkers}, @code{int} @var{SchedulerLoop}, @code{int} @var{DelayedReleaseLoad}, @code{int} @var{argc}, @code{char **} @var{argv}, @code{int} @var{ErrorNo}, and @code{char *} @var{ErrorCause}. The function returns an integer, which indicates the current status. If the result is @code{YAP_BOOT_ERROR} booting failed. If @var{SavedState} is not NULL, try to open and restore the file @var{SavedState}. Initially YAP will search in the current directory. If the saved state does not exist in the current directory YAP will use either the default library directory or the directory given by the environment variable @code{YAPLIBDIR}. Note that currently the saved state must be loaded at the same address where it was saved. If @var{HeapSize} is different from 0 use @var{HeapSize} as the minimum size of the Heap (or code space). If @var{StackSize} is different from 0 use @var{HeapSize} as the minimum size for the Stacks. If @var{TrailSize} is different from 0 use @var{TrailSize} as the minimum size for the Trails. The @var{NumberofWorkers}, @var{NumberofWorkers}, and @var{DelayedReleaseLoad} are only of interest to the or-parallel system. The argument count @var{argc} and string of arguments @var{argv} arguments are to be passed to user programs as the arguments used to call YAP. If booting failed you may consult @code{ErrorNo} and @code{ErrorCause} for the cause of the error, or call @code{YAP_Error(ErrorNo,0L,ErrorCause)} to do default processing. @item @code{void} YAP_PutValue(@code{Atom} @var{at}, @code{YAP_Term} @var{value}) @findex YAP_PutValue/2 Associate the term @var{value} with the atom @var{at}. The term @var{value} must be a constant. This functionality is used by YAP as a simple way for controlling and communicating with the Prolog run-time. @item @code{YAP_Term} YAP_Read(@code{int (*)(void)} @var{GetC}) @findex YAP_Read/1 Parse a Term using the function @var{GetC} to input characters. @item @code{YAP_Term} YAP_Write(@code{YAP_Term} @var{t}) @findex YAP_CopyTerm/1 Copy a Term @var{t} and all associated constraints. May call the garbage collector and returns @code{0L} on error (such as no space being available). @item @code{void} YAP_Write(@code{YAP_Term} @var{t}, @code{void (*)(int)} @var{PutC}, @code{int} @var{flags}) @findex YAP_Write/3 Write a Term @var{t} using the function @var{PutC} to output characters. The term is written according to a mask of the following flags in the @code{flag} argument: @code{YAP_WRITE_QUOTED}, @code{YAP_WRITE_HANDLE_VARS}, and @code{YAP_WRITE_IGNORE_OPS}. @item @code{void} YAP_WriteBuffer(@code{YAP_Term} @var{t}, @code{char *} @var{buff}, @code{unsigned int} @var{size}, @code{int} @var{flags}) @findex YAP_WriteBuffer/4 Write a YAP_Term @var{t} to buffer @var{buff} with size @var{size}. The term is written according to a mask of the following flags in the @code{flag} argument: @code{YAP_WRITE_QUOTED}, @code{YAP_WRITE_HANDLE_VARS}, and @code{YAP_WRITE_IGNORE_OPS}. @item @code{void} YAP_InitConsult(@code{int} @var{mode}, @code{char *} @var{filename}) @findex YAP_InitConsult/2 Enter consult mode on file @var{filename}. This mode maintains a few data-structures internally, for instance to know whether a predicate before or not. It is still possible to execute goals in consult mode. If @var{mode} is @code{TRUE} the file will be reconsulted, otherwise just consulted. In practice, this function is most useful for bootstrapping Prolog, as otherwise one may call the Prolog predicate @code{compile/1} or @code{consult/1} to do compilation. Note that it is up to the user to open the file @var{filename}. The @code{YAP_InitConsult} function only uses the file name for internal bookkeeping. @item @code{void} YAP_EndConsult(@code{void}) @findex YAP_EndConsult/0 Finish consult mode. @end itemize Some observations: @itemize @bullet @item The system will core dump if you try to load the saved state in a different address from where it was made. This may be a problem if your program uses @code{mmap}. This problem will be addressed in future versions of YAP. @item Currently, the YAP library will pollute the name space for your program. @item The initial library includes the complete YAP system. In the future we plan to split this library into several smaller libraries (e.g. if you do not want to perform I/O). @item You can generate your own saved states. Look at the @code{boot.yap} and @code{init.yap} files. @end itemize @node Compatibility, Operators, YAPLibrary, Top @chapter Compatibility with Other Prolog systems YAP has been designed to be as compatible as possible with other Prolog systems, and initially with C-Prolog. More recent work on YAP has included features initially proposed for the Quintus and SICStus Prolog systems. Developments since @code{YAP4.1.6} we have striven at making YAP compatible with the ISO-Prolog standard. @menu * C-Prolog:: Compatibility with the C-Prolog interpreter * SICStus Prolog:: Compatibility with the SICStus Prolog system * ISO Prolog:: Compatibility with the ISO Prolog standard @end menu @node C-Prolog, SICStus Prolog, , Compatibility @section Compatibility with the C-Prolog interpreter @menu C-Prolog Compatibility * Major Differences with C-Prolog:: Major Differences between YAP and C-Prolog * Fully C-Prolog Compatible:: YAP predicates fully compatible with C-Prolog * Not Strictly C-Prolog Compatible:: YAP predicates not strictly as C-Prolog * Not in C-Prolog:: YAP predicates not available in C-Prolog * Not in YAP:: C-Prolog predicates not available in YAP @end menu @node Major Differences with C-Prolog, Fully C-Prolog Compatible, , C-Prolog @subsection Major Differences between YAP and C-Prolog. YAP includes several extensions over the original C-Prolog system. Even so, most C-Prolog programs should run under YAP without changes. The most important difference between YAP and C-Prolog is that, being YAP a compiler, some changes should be made if predicates such as @code{assert}, @code{clause} and @code{retract} are used. First predicates which will change during execution should be declared as @code{dynamic} by using commands like: @example :- dynamic f/n. @end example @noindent where @code{f} is the predicate name and n is the arity of the predicate. Note that several such predicates can be declared in a single command: @example :- dynamic f/2, ..., g/1. @end example Primitive predicates such as @code{retract} apply only to dynamic predicates. Finally note that not all the C-Prolog primitive predicates are implemented in YAP. They can easily be detected using the @code{unknown} system predicate provided by YAP. Last, by default YAP enables character escapes in strings. You can disable the special interpretation for the escape character by using: @example @code{:- yap_flag(character_escapes,off).} @end example @noindent or by using: @example @code{:- yap_flag(language,cprolog).} @end example @node Fully C-Prolog Compatible, Not Strictly C-Prolog Compatible, Major Differences with C-Prolog, C-Prolog @subsection YAP predicates fully compatible with C-Prolog These are the Prolog built-ins that are fully compatible in both C-Prolog and YAP: @printindex cy @node Not Strictly C-Prolog Compatible, Not in C-Prolog, Fully C-Prolog Compatible, C-Prolog @subsection YAP predicates not strictly compatible with C-Prolog These are YAP built-ins that are also available in C-Prolog, but that are not fully compatible: @printindex ca @node Not in C-Prolog, Not in YAP, Not Strictly C-Prolog Compatible, C-Prolog @subsection YAP predicates not available in C-Prolog These are YAP built-ins not available in C-Prolog. @printindex cn @node Not in YAP, , Not in C-Prolog, C-Prolog @subsection YAP predicates not available in C-Prolog These are C-Prolog built-ins not available in YAP: @table @code @item 'LC' The following Prolog text uses lower case letters. @item 'NOLC' The following Prolog text uses upper case letters only. @end table @node SICStus Prolog, ISO Prolog, C-Prolog, Compatibility @section Compatibility with the Quintus and SICStus Prolog systems The Quintus Prolog system was the first Prolog compiler to use Warren's Abstract Machine. This system was very influential in the Prolog community. Quintus Prolog implemented compilation into an abstract machine code, which was then emulated. Quintus Prolog also included several new built-ins, an extensive library, and in later releases a garbage collector. The SICStus Prolog system, developed at SICS (Swedish Institute of Computer Science), is an emulator based Prolog system largely compatible with Quintus Prolog. SICStus Prolog has evolved through several versions. The current version includes several extensions, such as an object implementation, co-routining, and constraints. Recent work in YAP has been influenced by work in Quintus and SICStus Prolog. Wherever possible, we have tried to make YAP compatible with recent versions of these systems, and specifically of SICStus Prolog. You should use @example :- yap_flag(language, sicstus). @end example @noindent for maximum compatibility with SICStus Prolog. @menu SICStus Compatibility * Major Differences with SICStus:: Major Differences between YAP and SICStus Prolog * Fully SICStus Compatible:: YAP predicates fully compatible with SICStus Prolog * Not Strictly SICStus Compatible:: YAP predicates not strictly as SICStus Prolog * Not in SICStus Prolog:: YAP predicates not available in SICStus Prolog @end menu @node Major Differences with SICStus, Fully SICStus Compatible, , SICStus Prolog @subsection Major Differences between YAP and SICStus Prolog. Both YAP and SICStus Prolog obey the Edinburgh Syntax and are based on the WAM. Even so, there are quite a few important differences: @itemize @bullet @item Differently from SICStus Prolog, YAP does not have a notion of interpreted code. All code in YAP is compiled. @item YAP does not support an intermediate byte-code representation, so the @code{fcompile/1} and @code{load/1} built-ins are not available in YAP. @item YAP implements escape sequences as in the ISO standard. SICStus Prolog implements Unix-like escape sequences. @item YAP implements @code{initialization/1} as per the ISO standard. Use @code{prolog_initialization/1} for the SICStus Prolog compatible built-in. @item Prolog flags are different in SICStus Prolog and in YAP. @item The SICStus Prolog @code{on_exception/3} and @code{raise_exception} built-ins correspond to the ISO built-ins @code{catch/3} and @code{throw/1}. @item The following SICStus Prolog v3 built-ins are not (currently) implemented in YAP (note that this is only a partial list): @code{call_cleanup/1}, @code{file_search_path/2}, @code{stream_interrupt/3}, @code{reinitialize/0}, @code{help/0}, @code{help/1}, @code{trimcore/0}, @code{load_files/1}, @code{load_files/2}, and @code{require/1}. The previous list is incomplete. We also cannot guarantee full compatibility for other built-ins (although we will try to address any such incompatibilities). Last, SICStus Prolog is an evolving system, so one can be expect new incompatibilities to be introduced in future releases of SICStus Prolog. @item YAP allows asserting and abolishing static code during execution through the @code{assert_static/1} and @code{abolish/1} built-ins. This is not allowed in Quintus Prolog or SICStus Prolog. @item YAP implements rational trees and co-routining but they are not included by default in the system. You must enable these extensions when compiling the system. @item YAP does not currently implement constraints. @item The socket predicates, although designed to be compatible with SICStus Prolog, are built-ins, not library predicates, in YAP. @item This list is incomplete. @end itemize The following differences only exist if the @code{language} flag is set to @code{yap} (the default): @itemize @bullet @item The @code{consult/1} predicate in YAP follows C-Prolog semantics. That is, it adds clauses to the data base, even for preexisting procedures. This is different from @code{consult/1} in SICStus Prolog. @cindex update semantics @item By default, the data-base in YAP follows "immediate update semantics", instead of "logical update semantics", as Quintus Prolog or SICStus Prolog do. The difference is depicted in the next example: @example :- dynamic a/1. ?- assert(a(1)). ?- retract(a(X)), X1 is X +1, assertz(a(X)). @end example With immediate semantics, new clauses or entries to the data base are visible in backtracking. In this example, the first call to @code{retract/1} will succeed. The call to @strong{assertz/1} will then succeed. On backtracking, the system will retry @code{retract/1}. Because the newly asserted goal is visible to @code{retract/1}, it can be retracted from the data base, and @code{retract(a(X))} will succeed again. The process will continue generating integers for ever. Immediate semantics were used in C-Prolog. With logical update semantics, any additions or deletions of clauses for a goal @emph{will not affect previous activations of the goal}. In the example, the call to @code{assertz/1} will not see the update performed by the @code{assertz/1}, and the query will have a single solution. Calling @code{yap_flag(update_semantics,logical)} will switch YAP to use logical update semantics. @item @code{dynamic/1} is a built-in, not a directive, in YAP. @item By default, YAP fails on undefined predicates. To follow default SICStus Prolog use: @example :- yap_flag(unknown,error). @end example @item By default, directives in YAP can be called from the top level. @end itemize @node Fully SICStus Compatible, Not Strictly SICStus Compatible, Major Differences with SICStus, SICStus Prolog @subsection YAP predicates fully compatible with SICStus Prolog These are the Prolog built-ins that are fully compatible in both SICStus Prolog and YAP: @printindex sy @node Not Strictly SICStus Compatible, Not in SICStus Prolog, Fully SICStus Compatible, SICStus Prolog @subsection YAP predicates not strictly compatible with SICStus Prolog These are YAP built-ins that are also available in SICStus Prolog, but that are not fully compatible: @printindex sa @node Not in SICStus Prolog, , Not Strictly SICStus Compatible, SICStus Prolog @subsection YAP predicates not available in SICStus Prolog These are YAP built-ins not available in SICStus Prolog. @printindex sn @node ISO Prolog, , SICStus Prolog, Compatibility @section Compatibility with the ISO Prolog standard The Prolog standard was developed by ISO/IEC JTC1/SC22/WG17, the international standardization working group for the programming language Prolog. The book "Prolog: The Standard" by Deransart, Ed-Dbali and Cervoni gives a complete description of this standard. Development in YAP from YAP4.1.6 onwards have striven at making YAP compatible with ISO Prolog. As such: @itemize @bullet @item YAP now supports all of the built-ins required by the ISO-standard, and, @item Error-handling is as required by the standard. @end itemize YAP by default is not fully ISO standard compliant. You can set the @code{language} flag to @code{iso} to obtain very good compatibility. Setting this flag changes the following: @itemize @bullet @item By default, YAP uses "immediate update semantics" for its database, and not "logical update semantics", as per the standard, (@pxref{SICStus Prolog}). This affects @code{assert/1}, @code{retract/1}, and friends. Calling @code{set_prolog_flag(update_semantics,logical)} will switch YAP to use logical update semantics. @item By default, YAP implements the @code{atom_chars/2} (@pxref{Testing Terms}), and @code{number_chars/2}, (@pxref{Testing Terms}), built-ins as per the original Quintus Prolog definition, and not as per the ISO definition. Calling @code{set_prolog_flag(to_chars_mode,iso)} will switch YAP to use the ISO definition for @code{atom_chars/2} and @code{number_chars/2}. @item By default, YAP fails on undefined predicates. To follow the ISO Prolog standard use: @example :- set_prolog_flag(unknown,error). @end example @item By default, YAP allows executable goals in directives. In ISO mode most directives can only be called from top level (the exceptions are @code{set_prolog_flag/2} and @code{op/3}). @item Error checking for meta-calls under ISO Prolog mode is stricter than by default. @item The @code{strict_iso} flag automatically enables the ISO Prolog standard. This feature should disable all features not present in the standard. @end itemize The following incompatibilities between YAP and the ISO standard are known to still exist: @itemize @bullet @item Currently, YAP does not handle overflow errors in integer operations, and handles floating-point errors only in some architectures. Otherwise, YAP follows IEEE arithmetic. @end itemize Please inform the authors on other incompatibilities that may still exist. @node Operators, Predicate Index, Compatibility, Top @appendix Summary of YAP Predefined Operators The Prolog syntax caters for operators of three main kinds: @itemize @bullet @item prefix; @item infix; @item postfix. @end itemize Each operator has precedence in the range 1 to 1200, and this precedence is used to disambiguate expressions where the structure of the term denoted is not made explicit using brackets. The operator of higher precedence is the main functor. If there are two operators with the highest precedence, the ambiguity is solved analyzing the types of the operators. The possible infix types are: @var{xfx}, @var{xfy}, and @var{yfx}. With an operator of type @var{xfx} both sub-expressions must have lower precedence than the operator itself, unless they are bracketed (which assigns to them zero precedence). With an operator type @var{xfy} only the left-hand sub-expression must have lower precedence. The opposite happens for @var{yfx} type. A prefix operator can be of type @var{fx} or @var{fy}. A postfix operator can be of type @var{xf} or @var{yf}. The meaning of the notation is analogous to the above. @example a + b * c @end example @noindent means @example a + (b * c) @end example @noindent as + and * have the following types and precedences: @example :-op(500,yfx,'+'). :-op(400,yfx,'*'). @end example Now defining @example :-op(700,xfy,'++'). :-op(700,xfx,'=:='). a ++ b =:= c @end example @noindent means @example a ++ (b =:= c) @end example The following is the list of the declarations of the predefined operators: @example :-op(1200,fx,['?-', ':-']). :-op(1200,xfx,[':-','-->']). :-op(1150,fx,[block,dynamic,mode,public,multifile,meta_predicate, sequential,table,initialization]). :-op(1100,xfy,[';','|']). :-op(1050,xfy,->). :-op(1000,xfy,','). :-op(999,xfy,'.'). :-op(900,fy,['\+', not]). :-op(900,fx,[nospy, spy]). :-op(700,xfx,[@@>=,@@=<,@@<,@@>,<,=,>,=:=,=\=,\==,>=,=<,==,\=,=..,is]). :-op(500,yfx,['\/','/\','+','-']). :-op(500,fx,['+','-']). :-op(400,yfx,['<<','>>','//','*','/']). :-op(300,xfx,mod). :-op(200,xfy,['^','**']). :-op(50,xfx,same). @end example @node Predicate Index, Concept Index, Operators, Top @unnumbered Predicate Index @printindex fn @node Concept Index, , Predicate Index, Top @unnumbered Concept Index @printindex cp @contents @bye