This repository has been archived on 2023-08-20. You can view files and clone it, but cannot push or open issues or pull requests.
yap-6.3/utf8proc/data/charwidths.jl
2015-09-21 17:05:36 -05:00

192 lines
7.3 KiB
Julia
Raw Blame History

This file contains invisible Unicode characters

This file contains invisible Unicode characters that are indistinguishable to humans but may be processed differently by a computer. If you think that this is intentional, you can safely ignore this warning. Use the Escape button to reveal them.

This file contains Unicode characters that might be confused with other characters. If you think that this is intentional, you can safely ignore this warning. Use the Escape button to reveal them.

# Following work by @jiahao, we compute character widths using a combination of
# * advance widths from GNU Unifont (advance width 512 = 1 en)
# * UAX 11: East Asian Width
# * a few exceptions as needed
# Adapted from http://nbviewer.ipython.org/gist/jiahao/07e8b08bf6d8671e9734
#
# Requires Julia (obviously) and FontForge.
#############################################################################
# Julia 0.3/0.4 compatibility (taken from Compat package)
if VERSION < v"0.4.0-dev+1419"
const UInt16 = Uint16
end
CharWidths = Dict{Int,Int}()
#############################################################################
# Use ../libutf8proc for category codes, rather than the one in Julia,
# to minimize bootstrapping complexity when a new version of Unicode comes out.
catcode(c) = ccall((:utf8proc_category,"../libutf8proc"), Cint, (Int32,), c)
# use Base.UTF8proc module to get category codes constants, since
# we won't change these in utf8proc.
import Base.UTF8proc
#############################################################################
# Use a default width of 1 for all character categories that are
# letter/symbol/number-like. This can be overriden by Unifont or UAX 11
# below, but provides a useful nonzero fallback for new codepoints when
# a new Unicode version has been released but Unifont hasn't been updated yet.
zerowidth = Set{Int}() # categories that may contain zero-width chars
push!(zerowidth, UTF8proc.UTF8PROC_CATEGORY_CN)
push!(zerowidth, UTF8proc.UTF8PROC_CATEGORY_MN)
push!(zerowidth, UTF8proc.UTF8PROC_CATEGORY_MC)
push!(zerowidth, UTF8proc.UTF8PROC_CATEGORY_ME)
push!(zerowidth, UTF8proc.UTF8PROC_CATEGORY_SK)
push!(zerowidth, UTF8proc.UTF8PROC_CATEGORY_ZS)
push!(zerowidth, UTF8proc.UTF8PROC_CATEGORY_ZL)
push!(zerowidth, UTF8proc.UTF8PROC_CATEGORY_ZP)
push!(zerowidth, UTF8proc.UTF8PROC_CATEGORY_CC)
push!(zerowidth, UTF8proc.UTF8PROC_CATEGORY_CF)
push!(zerowidth, UTF8proc.UTF8PROC_CATEGORY_CS)
push!(zerowidth, UTF8proc.UTF8PROC_CATEGORY_CO)
for c in 0x0000:0x110000
if catcode(c) zerowidth
CharWidths[c] = 1
end
end
#############################################################################
# Widths from GNU Unifont
universion=get(ENV, "UNIFONT_VERSION", "7.0.06")
for fontfile in ["unifont-$universion", "unifont_upper-$universion"]
isfile("$fontfile.ttf") || download("http://unifoundry.com/pub/unifont-$universion/font-builds/$fontfile.ttf", "$fontfile.ttf")
isfile("$fontfile.sfd") || run(`fontforge -lang=ff -c "Open(\"$fontfile.ttf\");Save(\"$fontfile.sfd\");Quit(0);"`)
end
#Read sfdfile for character widths
function parsesfd(filename::String, CharWidths::Dict{Int,Int}=Dict{Int,Int}())
state=:seekchar
lineno = 0
codepoint = width = nothing
for line in readlines(open(filename))
lineno += 1
if state==:seekchar #StartChar: nonmarkingreturn
if contains(line, "StartChar: ")
codepoint = nothing
width = nothing
state = :readdata
end
elseif state==:readdata #Encoding: 65538 -1 2, Width: 1024
contains(line, "Encoding:") && (codepoint = int(split(line)[3]))
contains(line, "Width:") && (width = int(split(line)[2]))
if codepoint!=nothing && width!=nothing && codepoint >= 0
w=div(width, 512) # 512 units to the en
if w > 0
# only add nonzero widths, since (1) the default is zero
# and (2) this circumvents some apparent bugs in Unifont
# (https://savannah.gnu.org/bugs/index.php?45395)
CharWidths[codepoint] = w
end
state = :seekchar
end
end
end
CharWidths
end
CharWidths=parsesfd("unifont-$universion.sfd", CharWidths)
CharWidths=parsesfd("unifont_upper-$universion.sfd", CharWidths)
#############################################################################
# Widths from UAX #11: East Asian Width
# .. these take precedence over the Unifont width for all codepoints
# listed explicitly as wide/full/narrow/half-width
isfile("EastAsianWidth.txt") || download("http://www.unicode.org/Public/UNIDATA/EastAsianWidth.txt", "EastAsianWidth.txt")
for line in readlines(open("EastAsianWidth.txt"))
#Strip comments
line[1] == '#' && continue
precomment = split(line, '#')[1]
#Parse code point range and width code
tokens = split(precomment, ';')
length(tokens) >= 2 || continue
charrange = tokens[1]
width = strip(tokens[2])
#Parse code point range into Julia UnitRange
rangetokens = split(charrange, "..")
charstart = uint32("0x"*rangetokens[1])
charend = uint32("0x"*rangetokens[length(rangetokens)>1 ? 2 : 1])
#Assign widths
for c in charstart:charend
if width=="W" || width=="F" # wide or full
CharWidths[c]=2
elseif width=="Na"|| width=="H" # narrow or half
CharWidths[c]=1
end
end
end
#############################################################################
# A few exceptions to the above cases, found by manual comparison
# to other wcwidth functions and similar checks.
for c in keys(CharWidths)
cat = catcode(c)
# make sure format control character (category Cf) have width 0,
# except for the Arabic characters 0x06xx (see unicode std 6.2, sec. 8.2)
if cat==UTF8proc.UTF8PROC_CATEGORY_CF && c [0x0601,0x0602,0x0603,0x06dd]
CharWidths[c]=0
end
# Unifont has nonzero width for a number of non-spacing combining
# characters, e.g. (in 7.0.06): f84,17b4,17b5,180b,180d,2d7f, and
# the variation selectors
if cat==UTF8proc.UTF8PROC_CATEGORY_MN
CharWidths[c]=0
end
# We also assign width of zero to unassigned and private-use
# codepoints (Unifont includes ConScript Unicode Registry PUA fonts,
# but since these are nonstandard it seems questionable to recognize them).
if cat==UTF8proc.UTF8PROC_CATEGORY_CO || cat==UTF8proc.UTF8PROC_CATEGORY_CN
CharWidths[c]=0
end
# for some reason, Unifont has width-2 glyphs for ASCII control chars
if cat==UTF8proc.UTF8PROC_CATEGORY_CC
CharWidths[c]=0
end
end
#By definition, should have zero width (on the same line)
#0x002028 '' category: Zl name: LINE SEPARATOR/
#0x002029 '' category: Zp name: PARAGRAPH SEPARATOR/
CharWidths[0x2028]=0
CharWidths[0x2029]=0
#By definition, should be narrow = width of 1 en space
#0x00202f '' category: Zs name: NARROW NO-BREAK SPACE/
CharWidths[0x202f]=1
#By definition, should be wide = width of 1 em space
#0x002001 '' category: Zs name: EM QUAD/
#0x002003 '' category: Zs name: EM SPACE/
CharWidths[0x2001]=2
CharWidths[0x2003]=2
#############################################################################
# Output (to a file or pipe) for processing by data_generator.rb
# ... don't bother to output zero widths since that will be the default.
firstc = 0x000000
lastv = 0
uhex(c) = uppercase(hex(c,4))
for c in 0x0000:0x110000
v = get(CharWidths, c, 0)
if v != lastv || c == 0x110000
v < 4 || error("invalid charwidth $v for $c")
if firstc+1 < c
println(uhex(firstc), "..", uhex(c-1), "; ", lastv)
else
println(uhex(firstc), "; ", lastv)
end
firstc = c
lastv = v
end
end