This repository has been archived on 2023-08-20. You can view files and clone it, but cannot push or open issues or pull requests.
yap-6.3/library/atts.yap
Vítor Santos Costa 3009987985 update docs
2014-09-11 14:06:57 -05:00

502 lines
16 KiB
Prolog

/*************************************************************************
* *
* YAP Prolog *
* *
* Yap Prolog was developed at NCCUP - Universidade do Porto *
* *
* Copyright L.Damas, V.S.Costa and Universidade do Porto 1985-1997 *
* *
**************************************************************************
* *
* File: atts.yap *
* Last rev: 8/2/88 *
* mods: *
* comments: attribute support for Prolog *
* *
*************************************************************************/
:- module(attributes, [op(1150, fx, attribute)]).
/** @defgroup Old_Style_Attribute_Declarations SICStus Prolog style Attribute Declarations
@ingroup Attributed_Variables
@{
Old style attribute declarations are activated through loading the library <tt>atts</tt> . The command
~~~~~
| ?- use_module(library(atts)).
~~~~~
enables this form of use of attributed variables. The package provides the
following functionality:
+ Each attribute must be declared first. Attributes are described by a functor
and are declared per module. Each Prolog module declares its own sets of
attributes. Different modules may have different functors with the same
module.
+ The built-in put_atts/2 adds or deletes attributes to a
variable. The variable may be unbound or may be an attributed
variable. In the latter case, YAP discards previous values for the
attributes.
+ The built-in get_atts/2 can be used to check the values of
an attribute associated with a variable.
+ The unification algorithm calls the user-defined predicate
<tt>verify_attributes/3</tt> before trying to bind an attributed
variable. Unification will resume after this call.
+ The user-defined predicate
<tt>attribute_goal/2</tt> converts from an attribute to a goal.
+ The user-defined predicate
<tt>project_attributes/2</tt> is used from a set of variables into a set of
constraints or goals. One application of <tt>project_attributes/2</tt> is in
the top-level, where it is used to output the set of
floundered constraints at the end of a query.
/** @defgroup Attribute_Declarations Attribute Declarations
@ingroup Old_Style_Attribute_Declarations
@{
Attributes are compound terms associated with a variable. Each attribute
has a <em>name</em> which is <em>private</em> to the module in which the
attribute was defined. Variables may have at most one attribute with a
name. Attribute names are defined with the following declaration:
~~~~~
:- attribute AttributeSpec, ..., AttributeSpec.
~~~~~
where each _AttributeSpec_ has the form ( _Name_/ _Arity_).
One single such declaration is allowed per module _Module_.
Although the YAP module system is predicate based, attributes are local
to modules. This is implemented by rewriting all calls to the
built-ins that manipulate attributes so that attribute names are
preprocessed depending on the module. The `user:goal_expansion/3`
mechanism is used for this purpose.
The attribute manipulation predicates always work as follows:
+ The first argument is the unbound variable associated with
attributes,
+ The second argument is a list of attributes. Each attribute will
be a Prolog term or a constant, prefixed with the <tt>+</tt> and <tt>-</tt> unary
operators. The prefix <tt>+</tt> may be dropped for convenience.
The following three procedures are available to the user. Notice that
these built-ins are rewritten by the system into internal built-ins, and
that the rewriting process <em>depends</em> on the module on which the
built-ins have been invoked.
The user-predicate predicate verify_attributes/3 is called when
attempting to unify an attributed variable which might have attributes
in some _Module_.
Attributes are usually presented as goals. The following routines are
used by built-in predicates such as call_residue/2 and by the
Prolog top-level to display attributes:
Constraint solvers must be able to project a set of constraints to a set
of variables. This is useful when displaying the solution to a goal, but
may also be used to manipulate computations. The user-defined
project_attributes/2 is responsible for implementing this
projection.
The following two examples example is taken from the SICStus Prolog manual. It
sketches the implementation of a simple finite domain `solver`. Note
that an industrial strength solver would have to provide a wider range
of functionality and that it quite likely would utilize a more efficient
representation for the domains proper. The module exports a single
predicate `domain( _-Var_, _?Domain_)` which associates
_Domain_ (a list of terms) with _Var_. A variable can be
queried for its domain by leaving _Domain_ unbound.
We do not present here a definition for project_attributes/2.
Projecting finite domain constraints happens to be difficult.
~~~~~
:- module(domain, [domain/2]).
:- use_module(library(atts)).
:- use_module(library(ordsets), [
ord_intersection/3,
ord_intersect/2,
list_to_ord_set/2
]).
:- attribute dom/1.
verify_attributes(Var, Other, Goals) :-
get_atts(Var, dom(Da)), !, % are we involved?
( var(Other) -> % must be attributed then
( get_atts(Other, dom(Db)) -> % has a domain?
ord_intersection(Da, Db, Dc),
Dc = [El|Els], % at least one element
( Els = [] -> % exactly one element
Goals = [Other=El] % implied binding
; Goals = [],
put_atts(Other, dom(Dc))% rescue intersection
)
; Goals = [],
put_atts(Other, dom(Da)) % rescue the domain
)
; Goals = [],
ord_intersect([Other], Da) % value in domain?
).
verify_attributes(_, _, []). % unification triggered
% because of attributes
% in other modules
attribute_goal(Var, domain(Var,Dom)) :- % interpretation as goal
get_atts(Var, dom(Dom)).
domain(X, Dom) :-
var(Dom), !,
get_atts(X, dom(Dom)).
domain(X, List) :-
list_to_ord_set(List, Set),
Set = [El|Els], % at least one element
( Els = [] -> % exactly one element
X = El % implied binding
; put_atts(Fresh, dom(Set)),
X = Fresh % may call
% verify_attributes/3
).
~~~~~
Note that the _implied binding_ `Other=El` was deferred until after
the completion of `verify_attribute/3`. Otherwise, there might be a
danger of recursively invoking `verify_attribute/3`, which might bind
`Var`, which is not allowed inside the scope of `verify_attribute/3`.
Deferring unifications into the third argument of `verify_attribute/3`
effectively serializes the calls to `verify_attribute/3`.
Assuming that the code resides in the file domain.yap, we
can use it via:
~~~~~
| ?- use_module(domain).
~~~~~
Let's test it:
~~~~~
| ?- domain(X,[5,6,7,1]), domain(Y,[3,4,5,6]), domain(Z,[1,6,7,8]).
domain(X,[1,5,6,7]),
domain(Y,[3,4,5,6]),
domain(Z,[1,6,7,8]) ?
yes
| ?- domain(X,[5,6,7,1]), domain(Y,[3,4,5,6]), domain(Z,[1,6,7,8]),
X=Y.
Y = X,
domain(X,[5,6]),
domain(Z,[1,6,7,8]) ?
yes
| ?- domain(X,[5,6,7,1]), domain(Y,[3,4,5,6]), domain(Z,[1,6,7,8]),
X=Y, Y=Z.
X = 6,
Y = 6,
Z = 6
~~~~~
To demonstrate the use of the _Goals_ argument of
verify_attributes/3, we give an implementation of
freeze/2. We have to name it `myfreeze/2` in order to
avoid a name clash with the built-in predicate of the same name.
~~~~~
:- module(myfreeze, [myfreeze/2]).
:- use_module(library(atts)).
:- attribute frozen/1.
verify_attributes(Var, Other, Goals) :-
get_atts(Var, frozen(Fa)), !, % are we involved?
( var(Other) -> % must be attributed then
( get_atts(Other, frozen(Fb)) % has a pending goal?
-> put_atts(Other, frozen((Fa,Fb))) % rescue conjunction
; put_atts(Other, frozen(Fa)) % rescue the pending goal
),
Goals = []
; Goals = [Fa]
).
verify_attributes(_, _, []).
attribute_goal(Var, Goal) :- % interpretation as goal
get_atts(Var, frozen(Goal)).
myfreeze(X, Goal) :-
put_atts(Fresh, frozen(Goal)),
Fresh = X.
~~~~~
Assuming that this code lives in file myfreeze.yap,
we would use it via:
~~~~~
| ?- use_module(myfreeze).
| ?- myfreeze(X,print(bound(x,X))), X=2.
bound(x,2) % side effect
X = 2 % bindings
~~~~~
The two solvers even work together:
~~~~~
| ?- myfreeze(X,print(bound(x,X))), domain(X,[1,2,3]),
domain(Y,[2,10]), X=Y.
bound(x,2) % side effect
X = 2, % bindings
Y = 2
~~~~~
The two example solvers interact via bindings to shared attributed
variables only. More complicated interactions are likely to be found
in more sophisticated solvers. The corresponding
verify_attributes/3 predicates would typically refer to the
attributes from other known solvers/modules via the module prefix in
` _Module_:get_atts/2`.
*/
:- use_module(library(lists), [member/2]).
:- multifile
user:goal_expansion/3.
:- multifile
user:term_expansion/2.
:- dynamic existing_attribute/4.
:- dynamic modules_with_attributes/1.
:- dynamic attributed_module/3.
modules_with_attributes([]).
%
% defining a new attribute is just a question of establishing a
% Functor, Mod -> INT mappings
%
new_attribute(V) :- var(V), !,
throw(error(instantiation_error,attribute(V))).
new_attribute((At1,At2)) :-
new_attribute(At1),
new_attribute(At2).
new_attribute(Na/Ar) :-
source_module(Mod),
functor(S,Na,Ar),
existing_attribute(S,Mod,_,_) , !.
new_attribute(Na/Ar) :-
source_module(Mod),
functor(S,Na,Ar),
store_new_module(Mod,Ar,Position),
assertz(existing_attribute(S,Mod,Ar,Position)).
store_new_module(Mod,Ar,ArgPosition) :-
(
retract(attributed_module(Mod,Position,_))
->
true
;
retract(modules_with_attributes(Mods)),
assert(modules_with_attributes([Mod|Mods])), Position = 2
),
ArgPosition is Position+1,
( Ar == 0 -> NOfAtts is Position+1 ; NOfAtts is Position+Ar),
functor(AccessTerm,Mod,NOfAtts),
assertz(attributed_module(Mod,NOfAtts,AccessTerm)).
:- user_defined_directive(attribute(G), attributes:new_attribute(G)).
/** @pred _Module_:get_atts( _-Var_, _?ListOfAttributes_)
Unify the list _?ListOfAttributes_ with the attributes for the unbound
variable _Var_. Each member of the list must be a bound term of the
form `+( _Attribute_)`, `-( _Attribute_)` (the <tt>kbd</tt>
prefix may be dropped). The meaning of <tt>+</tt> and <tt>-</tt> is:
+ +( _Attribute_)
Unifies _Attribute_ with a corresponding attribute associated with
_Var_, fails otherwise.
+ -( _Attribute_)
Succeeds if a corresponding attribute is not associated with
_Var_. The arguments of _Attribute_ are ignored.
*/
user:goal_expansion(get_atts(Var,AccessSpec), Mod, Goal) :-
expand_get_attributes(AccessSpec,Mod,Var,Goal).
/** @pred _Module_:put_atts( _-Var_, _?ListOfAttributes_)
Associate with or remove attributes from a variable _Var_. The
attributes are given in _?ListOfAttributes_, and the action depends
on how they are prefixed:
+ +( _Attribute_)
Associate _Var_ with _Attribute_. A previous value for the
attribute is simply replace (like with `set_mutable/2`).
+ -( _Attribute_)
Remove the attribute with the same name. If no such attribute existed,
simply succeed.
*/
user:goal_expansion(put_atts(Var,AccessSpec), Mod, Goal) :-
expand_put_attributes(AccessSpec, Mod, Var, Goal).
expand_get_attributes(V,_,_,_) :- var(V), !, fail.
expand_get_attributes([],_,_,true) :- !.
expand_get_attributes([-G1],Mod,V,attributes:free_att(V,Mod,Pos)) :-
existing_attribute(G1,Mod,_,Pos), !.
expand_get_attributes([+G1],Mod,V,attributes:get_att(V,Mod,Pos,A)) :-
existing_attribute(G1,Mod,1,Pos), !,
arg(1,G1,A).
expand_get_attributes([G1],Mod,V,attributes:get_att(V,Mod,Pos,A)) :-
existing_attribute(G1,Mod,1,Pos), !,
arg(1,G1,A).
expand_get_attributes(Atts,Mod,Var,attributes:get_module_atts(Var,AccessTerm)) :- Atts = [_|_], !,
attributed_module(Mod,NOfAtts,AccessTerm),
void_term(Void),
cvt_atts(Atts,Mod,Void,LAtts),
sort(LAtts,SortedLAtts),
free_term(Free),
build_att_term(1,NOfAtts,SortedLAtts,Free,AccessTerm).
expand_get_attributes(Att,Mod,Var,Goal) :-
expand_get_attributes([Att],Mod,Var,Goal).
build_att_term(NOfAtts,NOfAtts,[],_,_) :- !.
build_att_term(I0,NOfAtts,[I-Info|SortedLAtts],Void,AccessTerm) :-
I is I0+1, !,
copy_att_args(Info,I0,NI,AccessTerm),
build_att_term(NI,NOfAtts,SortedLAtts,Void,AccessTerm).
build_att_term(I0,NOfAtts,SortedLAtts,Void,AccessTerm) :-
I is I0+1,
arg(I,AccessTerm,Void),
build_att_term(I,NOfAtts,SortedLAtts,Void,AccessTerm).
cvt_atts(V,_,_,_) :- var(V), !, fail.
cvt_atts([],_,_,[]).
cvt_atts([V|_],_,_,_) :- var(V), !, fail.
cvt_atts([+Att|Atts],Mod,Void,[Pos-LAtts|Read]) :- !,
existing_attribute(Att,Mod,_,Pos),
(atom(Att) -> LAtts = [_] ; Att=..[_|LAtts]),
cvt_atts(Atts,Mod,Void,Read).
cvt_atts([-Att|Atts],Mod,Void,[Pos-LVoids|Read]) :- !,
existing_attribute(Att,Mod,_,Pos),
(
atom(Att)
->
LVoids = [Void]
;
Att =..[_|LAtts],
void_vars(LAtts,Void,LVoids)
),
cvt_atts(Atts,Mod,Void,Read).
cvt_atts([Att|Atts],Mod,Void,[Pos-LAtts|Read]) :- !,
existing_attribute(Att,Mod,_,Pos),
(atom(Att) -> LAtts = [_] ; Att=..[_|LAtts]),
cvt_atts(Atts,Mod,Void,Read).
copy_att_args([],I,I,_).
copy_att_args([V|Info],I,NI,AccessTerm) :-
I1 is I+1,
arg(I1,AccessTerm,V),
copy_att_args(Info,I1,NI,AccessTerm).
void_vars([],_,[]).
void_vars([_|LAtts],Void,[Void|LVoids]) :-
void_vars(LAtts,Void,LVoids).
expand_put_attributes(V,_,_,_) :- var(V), !, fail.
expand_put_attributes([-G1],Mod,V,attributes:rm_att(V,Mod,NOfAtts,Pos)) :-
existing_attribute(G1,Mod,_,Pos), !,
attributed_module(Mod,NOfAtts,_).
expand_put_attributes([+G1],Mod,V,attributes:put_att(V,Mod,NOfAtts,Pos,A)) :-
existing_attribute(G1,Mod,1,Pos), !,
attributed_module(Mod,NOfAtts,_),
arg(1,G1,A).
expand_put_attributes([G1],Mod,V,attributes:put_att(V,Mod,NOfAtts,Pos,A)) :-
existing_attribute(G1,Mod,1,Pos), !,
attributed_module(Mod,NOfAtts,_),
arg(1,G1,A).
expand_put_attributes(Atts,Mod,Var,attributes:put_module_atts(Var,AccessTerm)) :- Atts = [_|_], !,
attributed_module(Mod,NOfAtts,AccessTerm),
void_term(Void),
cvt_atts(Atts,Mod,Void,LAtts),
sort(LAtts,SortedLAtts),
free_term(Free),
build_att_term(1,NOfAtts,SortedLAtts,Free,AccessTerm).
expand_put_attributes(Att,Mod,Var,Goal) :-
expand_put_attributes([Att],Mod,Var,Goal).
woken_att_do(AttVar, Binding, NGoals, DoNotBind) :-
modules_with_attributes(AttVar,Mods0),
modules_with_attributes(Mods),
find_used(Mods,Mods0,[],ModsI),
do_verify_attributes(ModsI, AttVar, Binding, Goals),
process_goals(Goals, NGoals, DoNotBind).
% dirty trick to be able to unbind a variable that has been constrained.
process_goals([], [], _).
process_goals((M:do_not_bind_variable(Gs)).Goals, (M:Gs).NGoals, true) :- !,
process_goals(Goals, NGoals, _).
process_goals(G.Goals, G.NGoals, Do) :-
process_goals(Goals, NGoals, Do).
find_used([],_,L,L).
find_used([M|Mods],Mods0,L0,Lf) :-
member(M,Mods0), !,
find_used(Mods,Mods0,[M|L0],Lf).
find_used([_|Mods],Mods0,L0,Lf) :-
find_used(Mods,Mods0,L0,Lf).
/** @pred _Module_:verify_attributes( _-Var_, _+Value_, _-Goals_)
The predicate is called when trying to unify the attributed variable
_Var_ with the Prolog term _Value_. Note that _Value_ may be
itself an attributed variable, or may contain attributed variables. The
goal <tt>verify_attributes/3</tt> is actually called before _Var_ is
unified with _Value_.
It is up to the user to define which actions may be performed by
<tt>verify_attributes/3</tt> but the procedure is expected to return in
_Goals_ a list of goals to be called <em>after</em> _Var_ is
unified with _Value_. If <tt>verify_attributes/3</tt> fails, the
unification will fail.
Notice that the <tt>verify_attributes/3</tt> may be called even if _Var_<
has no attributes in module <tt>Module</tt>. In this case the routine should
simply succeed with _Goals_ unified with the empty list.
*/
do_verify_attributes([], _, _, []).
do_verify_attributes([Mod|Mods], AttVar, Binding, [Mod:Goal|Goals]) :-
current_predicate(verify_attributes,Mod:verify_attributes(_,_,_)), !,
Mod:verify_attributes(AttVar, Binding, Goal),
do_verify_attributes(Mods, AttVar, Binding, Goals).
do_verify_attributes([_|Mods], AttVar, Binding, Goals) :-
do_verify_attributes(Mods, AttVar, Binding, Goals).
/**
@}
*/