This repository has been archived on 2023-08-20. You can view files and clone it, but cannot push or open issues or pull requests.
yap-6.3/pl/boot.yap
vsc 97d882c1a7 use arrays to implement catch and throw instead of record
cleanup queues at top-level and at catch-throw.


git-svn-id: https://yap.svn.sf.net/svnroot/yap/trunk@69 b08c6af1-5177-4d33-ba66-4b1c6b8b522a
2001-06-08 19:10:43 +00:00

1292 lines
33 KiB
Prolog

/*************************************************************************
* *
* YAP Prolog *
* *
* Yap Prolog was developed at NCCUP - Universidade do Porto *
* *
* Copyright L.Damas, V.S.Costa and Universidade do Porto 1985-1997 *
* *
**************************************************************************
* *
* File: boot.yap *
* Last rev: 8/2/88 *
* mods: *
* comments: boot file for Prolog *
* *
*************************************************************************/
%
% This one should come first so that disjunctions and long distance
% cuts are compiled right with co-routining.
%
true :- true. % otherwise, $$compile will ignore this clause.
'$live' :-
'$init_system',
repeat,
set_input(user),set_output(user),
'$current_module'(Module),
( Module=user ->
'$compile_mode'(_,0)
;
'$format'(user_error,"[~w]~n", [Module])
),
'$system_catch'('$enter_top_level',Error,user:'$Error'(Error)).
'$init_system' :-
(
'$access_yap_flags'(15, 0) ->
'$version'
;
true
),
'$set_yap_flags'(10,0),
'$set_value'('$gc',on),
'$init_catch',
prompt(' ?- '),
(
'$get_value'('$break',0)
->
'$set_read_error_handler'(fail),
% after an abort, make sure all spy points are gone.
'$clean_debugging_info',
% simple trick to find out if this is we are booting from Prolog.
'$get_value'('$user_module',V),
( V = [] ->
'$current_module'(_,prolog)
;
'$current_module'(_,V), '$compile_mode'(_,0),
( exists('~/.yaprc') -> [-'~/.yaprc'] ; true ),
( exists('~/.prologrc') -> [-'~/.prologrc'] ; true ),
( exists('~/prolog.ini') -> [-'~/prolog.ini'] ; true )
),
'$clean_catch_and_throw',
'$db_clean_queues'(0),
'$startup_reconsult',
'$startup_goals'
;
true
).
'$init_catch' :-
% initialise access to the catch queue
( '$has_static_array'('$catch_queue') ->
true
;
static_array('$catch_queue',2, term)
),
update_array('$catch_queue', 0, '$'),
update_array('$catch_queue', 1, '$').
%
% encapsulate $cut_by because of co-routining.
%
'$cut_by'(X) :- '$$cut_by'(X).
% Start file for yap
/* I/O predicates */
/* stream predicates */
open(Source,M,T) :- var(Source), !,
throw(error(instantiation_error,open(Source,M,T))).
open(Source,M,T) :- var(M), !,
throw(error(instantiation_error,open(Source,M,T))).
open(Source,M,T) :- nonvar(T), !,
throw(error(type_error(variable,T),open(Source,M,T))).
open(File,Mode,Stream) :-
'$open'(File,Mode,Stream,0).
close(V) :- var(V), !,
throw(error(instantiation_error,close(V))).
close(File) :-
atom(File), !,
(
'$access_yap_flags'(8, 0),
current_stream(_,_,Stream),
'$user_file_name'(Stream,File)
->
'$close'(Stream)
;
'$close'(File)
).
close(Stream) :-
'$close'(Stream).
set_input(Stream) :-
'$set_input'(Stream).
set_output(Stream) :-
'$set_output'(Stream).
/* meaning of flags for '$write' is
1 quote illegal atoms
2 ignore operator declarations
4 output '$VAR'(N) terms as A, B, C, ...
8 use portray(_)
*/
write(T) :- current_output(S), '$write'(S,4,T), fail.
write(_).
write(Stream,T) :-
'$write'(Stream,4,T),
fail.
write(_,_).
put(Stream,N) :- N1 is N, '$put'(Stream,N1).
nl(Stream) :- '$put'(Stream,10).
nl :- current_output(Stream), '$put'(Stream,10), fail.
nl.
/* main execution loop */
'$read_vars'(Stream,T,V) :-
current_input(Old),
set_input(Stream),
'$read'(true,T,V),
set_input(Old).
'$enter_top_level' :-
'$clean_up_dead_clauses',
fail.
'$enter_top_level' :-
'$recorded'('$restore_goal',G,R),
erase(R),
prompt(_,' | '),
'$system_catch'('$do_yes_no'((G->true)),Error,user:'$Error'(Error)),
fail.
'$enter_top_level' :-
prompt(_,' ?- '),
prompt(' | '),
'$read_vars'(user_input,Command,Varnames),
'$set_value'(spy_sl,0),
'$set_value'(spy_fs,0),
'$set_value'(spy_sp,0),
'$set_value'(spy_gn,1),
'$set_yap_flags'(10,0),
'$set_value'(spy_cl,1),
'$set_value'(spy_leap,0),
'$setflop'(0),
prompt(_,' |: '),
'$run_toplevel_hooks',
'$command'((?-Command),Varnames,top),
'$sync_mmapped_arrays',
'$set_value'('$live',false).
'$startup_goals' :-
'$recorded'('$startup_goal',G,_),
'$system_catch'('$query'((G->true), []),Error,user:'$Error'(Error)),
fail.
'$startup_goals'.
'$startup_reconsult' :-
'$get_value'('$consult_on_boot',X), X \= [], !,
'$do_startup_reconsult'(X).
'$startup_reconsult'.
%
% remove any debugging info after an abort.
%
'$clean_debugging_info' :-
'$recorded'('$spy',_,R),
erase(R),
fail.
'$clean_debugging_info'.
'$erase_sets' :-
eraseall('$'),
eraseall('$$set'),
eraseall('$$one'),
eraseall('$reconsulted'), fail.
'$erase_sets' :- \+ '$recorded'('$path',_,_), '$recorda'('$path',"",_).
'$erase_sets'.
'$version' :-
'$get_value'('$version_name',VersionName),
'$format'(user_error, "[ YAP version ~w ]~n", [VersionName]),
fail.
'$version' :- '$recorded'('$version',VersionName,_),
'$format'(user_error, "~w~n", [VersionName]),
fail.
'$version'.
repeat :- '$repeat'.
'$repeat'.
'$repeat'.
'$repeat'.
'$repeat'.
'$repeat'.
'$repeat'.
'$repeat'.
'$repeat'.
'$repeat'.
'$repeat' :- '$repeat'.
'$start_corouts' :- '$recorded'('$corout','$corout'(Name,_,_),R), Name \= main, finish_corout(R),
fail.
'$start_corouts' :-
eraseall('$corout'),
eraseall('$result'),
eraseall('$actual'),
fail.
'$start_corouts' :- '$recorda'('$actual',main,_),
'$recordz'('$corout','$corout'(main,main,'$corout'([],[],[],[],[],[],[],[],[],[],[],[],[],[],[],[],[],[],[])),_Ref),
'$recorda'('$result',going,_).
'$command'(C,VL,Con) :-
'$access_yap_flags'(9,1), !,
'$execute_command'(C,VL,Con).
'$command'(C,VL,Con) :-
( (Con = top ; var(C) ; C = [_|_]) ->
'$execute_command'(C,VL,Con) ;
expand_term(C, EC),
'$execute_commands'(EC,VL,Con)
).
%
% Hack in case expand_term has created a list of commands.
%
'$execute_commands'(V,VL,Con) :- var(V), !,
throw(error(instantiation_error,meta_call(C))).
'$execute_commands'([],_,_) :- !, fail.
'$execute_commands'([C|_],VL,Con) :-
'$execute_command'(C,VL,Con).
'$execute_commands'([_|Cs],VL,Con) :- !,
'$execute_commands'(Cs,VL,Con).
'$execute_commands'(C,VL,Con) :-
'$execute_command'(C,VL,Con).
%
%
%
'$execute_command'(C,_,top) :- var(C), !,
throw(error(instantiation_error,meta_call(C))).
'$execute_command'(end_of_file,_,_).
'$execute_command'(C,_,top) :- number(C), !,
throw(error(type_error(callable,C),meta_call(C))).
'$execute_command'(R,_,top) :- db_reference(R), !,
throw(error(type_error(callable,R),meta_call(R))).
'$execute_command'((:-G),_,Option) :- !,
'$process_directive'(G, Option),
fail.
'$execute_command'((?-G),V,_) :- !,
'$execute_command'(G,V,top).
'$execute_command'((Mod:G),V,Option) :- !,
'$mod_switch'(Mod,'$execute_command'(G,V,Option)).
'$execute_command'(G,V,Option) :- '$continue_with_command'(Option,V,G).
%
% This command is very different depending on the language mode we are in.
%
% ISO only wants directives in files
% SICStus accepts everything in files
% YAP accepts everything everywhere
%
'$process_directive'(G, top) :-
'$access_yap_flags'(8, 0), !, % YAP mode, go in and do it,
'$process_directive'(G, consult).
'$process_directive'(G, top) :- !,
throw(error(context_error((:- G),clause),query)).
%
% always allow directives.
%
'$process_directive'(D, Mode) :-
'$directive'(D), !,
( '$exec_directive'(D, Mode) -> true ; true ).
%
% allow multiple directives
%
'$process_directive'((G1,G2), Mode) :-
'$all_directives'(G1),
'$all_directives'(G2), !,
'$exec_directives'(G1, Mode),
'$exec_directives'(G2, Mode).
%
% ISO does not allow goals (use initialization).
%
'$process_directive'(D, _) :-
'$access_yap_flags'(8, 1), !, % ISO Prolog mode, go in and do it,
throw(error(context_error((:- D),query),directive)).
%
% but YAP and SICStus does.
%
'$process_directive'(G, _) :-
'$current_module'(M),
( '$do_yes_no'(M:G) -> true ; '$format'(user_error,":- ~w:~w failed.~n",[M,G]) ).
'$all_directives'((G1,G2)) :- !,
'$all_directives'(G1),
'$all_directives'(G2).
'$all_directives'(G) :- !,
'$directive'(G).
'$continue_with_command'(reconsult,V,G) :-
'$go_compile_clause'(G,V,5),
fail.
'$continue_with_command'(consult,V,G) :-
'$go_compile_clause'(G,V,5),
fail.
'$continue_with_command'(top,V,G) :-
'$query'(G,V).
%
% not 100% compatible with SICStus Prolog, as SICStus Prolog would put
% module prefixes all over the place, although unnecessarily so.
%
'$go_compile_clause'(M:G,V,N) :- !,
'$mod_switch'(M,'$go_compile_clause'(G,V,N)).
'$go_compile_clause'((M:G :- B),V,N) :- !,
'$current_module'(M1),
(M1 = M ->
NG = (G :- B)
;
'$preprocess_clause_before_mod_change'((G:-B),M1,M,NG)
),
'$mod_switch'(M,'$go_compile_clause'(NG,V,N)).
'$go_compile_clause'(G,V,N) :-
'$prepare_term'(G,V,G0,G1),
'$$compile'(G1,G0,N).
'$prepare_term'(G,V,G0,G1) :-
( '$get_value'('$syntaxcheckflag',on) ->
'$check_term'(G,V) ; true ),
'$precompile_term'(G, G0, G1).
% proccess an input clause
'$$compile'(G,G0,L) :-
'$head_and_body'(G,H,_),
'$inform_of_clause'(H,L),
'$flags'(H, Fl, Fl),
( Fl /\ 16'002008 =\= 0 -> '$assertz_dynamic'(L,G,G0) ;
'$$compile_stat'(G,G0,L,H) ).
% process a clause for a static predicate
'$$compile_stat'(G,G0,L,H) :-
'$compile'(G,L),
% first occurrence of this predicate in this file,
% check if we need to erase the source and if
% it is a multifile procedure.
'$flags'(H,Fl,Fl),
( '$get_value'('$abol',true)
->
( Fl /\ 16'400000 =\= 0 -> '$erase_source'(H) ; true ),
( Fl /\ 16'040000 =\= 0 -> '$check_multifile_pred'(H,Fl) ; true )
;
true
),
( Fl /\ 16'400000 =:= 0 -> % is this procedure in source mode?
% no, just ignore
true
;
% and store our clause
'$store_stat_clause'(G0, H, L)
).
'$store_stat_clause'(G0, H, L) :-
'$head_and_body'(G0,H0,B0),
'$record_stat_source'(H,(H0:-B0),L,R),
functor(H, Na, Ar),
( '$is_multifile'(Na,Ar) ->
'$get_value'('$consulting_file',F),
'$current_module'(M),
'$recordz'('$multifile'(_,_,_), '$mf'(Na,Ar,M,F,R), _)
;
true
).
'$erase_source'(G) :- functor(G, Na, A),
'$is_multifile'(Na,A), !,
'$erase_mf_source'(Na,A).
'$erase_source'(G) :- '$recordedp'(G,_,R), erase(R), fail.
'$erase_source'(_).
'$erase_mf_source'(Na,A) :-
'$get_value'('$consulting_file',F),
'$current_module'(M),
'$recorded'('$multifile'(_,_,_), '$mf'(Na,A,M,F,R), R1),
erase(R1),
erase(R),
fail.
'$erase_mf_source'(Na,A) :-
'$get_value'('$consulting_file',F),
'$current_module'(M),
'$recorded'('$multifile_dynamic'(_,_,_), '$mf'(Na,A,M,F,R), R1),
erase(R1),
erase(R),
fail.
'$erase_mf_source'(_,_).
'$check_if_reconsulted'(N,A) :-
'$recorded'('$reconsulted',X,_),
( X = N/A , !;
X = '$', !, fail;
fail
).
'$inform_as_reconsulted'(N,A) :-
'$recorda'('$reconsulted',N/A,_).
'$clear_reconsulting' :-
'$recorded'('$reconsulted',X,Ref),
erase(Ref),
X == '$', !,
( '$recorded'('$reconsulting',_,R) -> erase(R) ).
/* Executing a query */
'$query'(end_of_file,V).
% ***************************
% * -------- YAPOR -------- *
% ***************************
'$query'(G,V) :-
\+ '$undefined'('$yapor_on'),
'$yapor_on',
\+ '$undefined'('$start_yapor'),
'$parallelizable'(G), !,
'$parallel_query'(G,V),
fail.
% end of YAPOR
'$query'(G,[]) :- !,
'$yes_no'(G,(?-)).
'$query'(G,V) :-
( '$execute'(G),
'$extract_goal_vars_for_dump'(V,LIV),
'$show_frozen'(G,LIV,LGs),
'$write_answer'(V, LGs, Written),
'$write_query_answer_true'(Written),
'$another',
!, fail ;
'$present_answer'(_, no),
fail
).
'$yes_no'(G,C) :-
'$do_yes_no'(G),
'$show_frozen'(G, [], LGs),
'$write_answer'([], LGs, Written),
( Written = [] ->
!,'$present_answer'(C, yes);
'$another', !
),
fail.
'$yes_no'(_,_) :-
'$present_answer'(_, no),
fail.
'$do_yes_no'([X|L]) :- !, '$csult'([X|L]).
'$do_yes_no'(G) :- '$execute'(G).
'$extract_goal_vars_for_dump'([],[]).
'$extract_goal_vars_for_dump'([[_|V]|VL],[V|LIV]) :-
'$extract_goal_vars_for_dump'(VL,LIV).
'$write_query_answer_true'([]) :- !,
'$format'(user_error,"~ntrue",[]).
'$write_query_answer_true'(_).
'$show_frozen'(G,V,LGs) :-
'$all_frozen_goals'(LGs0), LGs0 = [_|_], !,
'$all_attvars'(LAV),
'$convert_to_list_of_frozen_goals'(LGs0,V,LAV,G,LGs).
'$show_frozen'(_,_,[]).
%
% present_answer has three components. First it flushes the streams,
% then it presents the goals, and last it shows any goals frozen on
% the arguments.
%
'$present_answer'(_,_):-
'$flush_all_streams',
fail.
'$present_answer'((?-), Answ) :-
nl(user_error),
'$get_value'('$break',BL),
( BL \= 0 -> '$format'(user_error, "[~p] ",[BL]) ;
true ),
( '$recorded'('$print_options','$toplevel'(Opts),_) ->
write_term(user_error,Answ,Opts) ;
'$format'(user_error,"~w",[Answ])
),
nl(user_error).
'$another' :-
write(user_error,' ? '),
'$get0'(user_input,C),
( C==59 ->
'$skip'(user_input,10),fail;
C==10 -> nl(user_error)
;
'$skip'(user_input,10), '$ask_again_for_another'
).
'$ask_again_for_another' :-
write(user_error,'Action (";" for more choices, <return> for exit)'),
'$another'.
'$write_answer'(_,_,_) :-
'$flush_all_streams',
fail.
'$write_answer'(Vs, LBlk, LAnsw) :-
'$purge_dontcares'(Vs,NVs),
'$prep_answer_var_by_var'(NVs, LAnsw, LBlk),
'$name_vars_in_goals'(LAnsw, Vs, NLAnsw),
'$write_vars_and_goals'(NLAnsw).
'$purge_dontcares'([],[]).
'$purge_dontcares'([[[95|_]|_]|Vs],NVs) :- !,
'$purge_dontcares'(Vs,NVs).
'$purge_dontcares'([V|Vs],[V|NVs]) :-
'$purge_dontcares'(Vs,NVs).
'$prep_answer_var_by_var'([], L, L).
'$prep_answer_var_by_var'([[Name|Value]|L], LF, L0) :-
'$delete_identical_answers'(L, Value, NL, Names),
'$prep_answer_var'([Name|Names], Value, LF, LI),
'$prep_answer_var_by_var'(NL, LI, L0).
% fetch all cases that have the same solution.
'$delete_identical_answers'([], _, [], []).
'$delete_identical_answers'([[Name|Value]|L], Value0, FL, [Name|Names]) :-
Value == Value0, !,
'$delete_identical_answers'(L, Value0, FL, Names).
'$delete_identical_answers'([VV|L], Value0, [VV|FL], Names) :-
'$delete_identical_answers'(L, Value0, FL, Names).
% now create a list of pairs that will look like goals.
'$prep_answer_var'(Names, Value, LF, L0) :- var(Value), !,
'$prep_answer_unbound_var'(Names, LF, L0).
'$prep_answer_var'(Names, Value, [nonvar(Names,Value)|L0], L0).
% ignore unbound variables
'$prep_answer_unbound_var'([_], L, L) :- !.
'$prep_answer_unbound_var'(Names, [var(Names)|L0], L0).
'$gen_name_string'(I,L,[C|L]) :- I < 26, !, C is I+65.
'$gen_name_string'(I,L0,LF) :-
I1 is I mod 26,
I2 is I // 26,
C is I1+65,
'$gen_name_string'(I2,[C|L0],LF).
'$write_vars_and_goals'([]).
'$write_vars_and_goals'([G1|LG]) :-
'$write_goal_output'(G1),
'$write_remaining_vars_and_goals'(LG).
'$write_remaining_vars_and_goals'([]).
'$write_remaining_vars_and_goals'([G1|LG]) :-
'$format'(user_error,",",[]),
'$write_goal_output'(G1),
'$write_remaining_vars_and_goals'(LG).
'$write_goal_output'(var([V|VL])) :-
'$format'(user_error,"~n~s",[V]),
'$write_output_vars'(VL).
'$write_goal_output'(nonvar([V|VL],B)) :-
'$format'(user_error,"~n~s",[V]),
'$write_output_vars'(VL),
'$format'(user_error," = ", []),
( '$recorded'('$print_options','$toplevel'(Opts),_) ->
write_term(user_error,B,Opts) ;
'$format'(user_error,"~w",[B])
).
'$write_goal_output'(_-G) :-
'$format'(user_error,"~n",[]),
( '$recorded'('$print_options','$toplevel'(Opts),_) ->
write_term(user_error,G,Opts) ;
'$format'(user_error,"~w",[G])
).
'$name_vars_in_goals'(G, VL0, NG) :-
'$copy_term_but_not_constraints'(G+VL0, NG+NVL0),
'$name_well_known_vars'(NVL0),
'$variables_in_term'(NG, [], NGVL),
'$name_vars_in_goals1'(NGVL, 0, _).
'$name_well_known_vars'([]).
'$name_well_known_vars'([[Name|V]|NVL0]) :-
var(V), !,
V = '$VAR'(Name),
'$name_well_known_vars'(NVL0).
'$name_well_known_vars'([_|NVL0]) :-
'$name_well_known_vars'(NVL0).
'$name_vars_in_goals1'([], I, I).
'$name_vars_in_goals1'(['$VAR'([95|Name])|NGVL], I0, IF) :-
I is I0+1,
'$gen_name_string'(I0,[],Name), !,
'$name_vars_in_goals1'(NGVL, I, IF).
'$name_vars_in_goals1'([NV|NGVL], I0, IF) :-
nonvar(NV),
'$name_vars_in_goals1'(NGVL, II, IF).
'$write_output_vars'([]).
'$write_output_vars'([V|VL]) :-
'$format'(user_error," = ~s",[V]),
'$write_output_vars'(VL).
call(G) :- '$execute'(G).
incore(G) :- '$execute'(G).
%
% standard meta-call, called if $execute could not do everything.
%
'$meta_call'(G) :-
'$save_current_choice_point'(CP),
'$call'(G, CP, G).
%
% do it in ISO mode.
%
'$meta_call'(G,_ISO) :-
'$iso_check_goal'(G,G),
'$save_current_choice_point'(CP),
'$call'(G, CP, G).
'$meta_call'(G, CP, G0) :-
'$call'(G, CP,G0).
'$spied_meta_call'(G) :-
'$save_current_choice_point'(CP),
'$spied_call'(G, CP, G).
'$spied_meta_call'(G, CP, G0) :-
'$spied_call'(G, CP, G0).
'$call'(G, CP, G0, _) :- /* iso version */
'$iso_check_goal'(G,G0),
'$call'(G, CP,G0).
'$call'(M:_,_,G0) :- var(M), !,
throw(error(instantiation_error,call(G0))).
'$call'(M:G,CP,G0) :- !,
'$mod_switch'(M,'$call'(G,CP,G0)).
'$call'((A,B),CP,G0) :- !,
'$execute_within'(A,CP,G0),
'$execute_within'(B,CP,G0).
'$call'((X->Y),CP,G0) :- !,
(
'$execute_within'(X,CP,G0)
->
'$execute_within'(Y,CP,G0)
).
'$call'((X->Y; Z),CP,G0) :- !,
(
'$execute_within'(X,CP,G0)
->
'$execute_within'(Y,CP,G0)
;
'$execute_within'(Z,CP,G0)
).
'$call'((A;B),CP,G0) :- !,
(
'$execute_within'(A,CP,G0)
;
'$execute_within'(B,CP,G0)
).
'$call'((A|B),CP, G0) :- !,
(
'$execute_within'(A,CP,G0)
;
'$execute_within'(B,CP,G0)
).
'$call'(\+ X, _, _) :- !,
\+ '$execute'(X).
'$call'(not(X), _, _) :- !,
\+ '$execute'(X).
'$call'(!, CP, _) :- !,
'$$cut_by'(CP).
'$call'([A|B],_, _) :- !,
'$csult'([A|B]).
'$call'(A, _, _) :-
(
% goal_expansion is defined, or
'$pred_goal_expansion_on'
;
% this is a meta-predicate
'$flags'(A,F,_), F /\ 0x200000 =:= 0x200000
), !,
'$current_module'(CurMod),
'$exec_with_expansion'(A, CurMod, CurMod).
'$call'(A, _, _) :-
'$execute0'(A).
'$spied_call'(M:_,_,G0) :- var(M), !,
throw(error(instantiation_error,call(G0))).
'$spied_call'(M:G,CP,G0) :- !,
'$mod_switch'(M,'$spied_call'(G,CP,G0)).
'$spied_call'((A,B),CP,G0) :- !,
'$execute_within'(A,CP,G0),
'$execute_within'(B,CP,G0).
'$spied_call'((X->Y),CP,G0) :- !,
(
'$execute_within'(X,CP,G0)
->
'$execute_within'(Y,CP,G0)
).
'$spied_call'((X->Y; Z),CP,G0) :- !,
(
'$execute_within'(X,CP,G0)
->
'$execute_within'(Y,CP,G0)
;
'$execute_within'(Z,CP,G0)
).
'$spied_call'((A;B),CP,G0) :- !,
(
'$execute_within'(A,CP,G0)
;
'$execute_within'(B,CP,G0)
).
'$spied_call'((A|B),CP,G0) :- !,
(
'$execute_within'(A,CP,G0)
;
'$execute_within'(B,CP,G0)
).
'$spied_call'(\+ X,_,_) :- !,
\+ '$execute'(X).
'$spied_call'(not X,_,_) :- !,
\+ '$execute'(X).
'$spied_call'(!,CP,_) :-
'$$cut_by'(CP).
'$spied_call'([A|B],_,_) :- !,
'$csult'([A|B]).
'$spied_call'(A, _CP, _G0) :-
(
% goal_expansion is defined, or
'$pred_goal_expansion_on'
;
% this is a meta-predicate
'$flags'(A,F,_), F /\ 0x200000 =:= 0x200000
), !,
'$current_module'(CurMod),
'$exec_with_expansion'(A, CurMod, CurMod).
'$spied_call'(A,CP,G0) :-
( '$undefined'(A) ->
functor(A,F,N), '$current_module'(M),
( '$recorded'('$import','$import'(S,M,F,N),_) ->
'$spied_call'(S:A,CP,G0) ;
'$spy'(A)
)
;
'$spy'(A)
).
'$check_callable'(V,G) :- var(V), !,
'$current_module'(Mod),
throw(error(instantiation_error,Mod:G)).
'$check_callable'(A,G) :- number(A), !,
'$current_module'(Mod),
throw(error(type_error(callable,A),Mod:G)).
'$check_callable'(R,G) :- db_reference(R), !,
'$current_module'(Mod),
throw(error(type_error(callable,R),Mod:G)).
'$check_callable'(_,_).
% Called by the abstract machine, if no clauses exist for a predicate
'$undefp'([M|G]) :-
functor(G,F,N),
'$recorded'('$import','$import'(S,M,F,N),_),
S \= M, % can't try importing from the module itself.
!,
'$exec_with_expansion'(G, S, M).
'$undefp'([M|G]) :-
\+ '$undefined'(user:unknown_predicate_handler(_,_,_)),
user:unknown_predicate_handler(G,M,NG), !,
'$execute'(M:NG).
'$undefp'([_|G]) :- '$is_dynamic'(G), !, fail.
'$undefp'([M|G]) :-
'$recorded'('$unknown','$unknown'(M:G,US),_), !,
'$execute'(user:US).
/* This is the break predicate,
it saves the importante data about current streams and
debugger state */
break :- '$get_value'('$break',BL), NBL is BL+1,
'$get_value'(spy_sl,SPY_SL),
'$get_value'(spy_fs,SPY_FS),
'$get_value'(spy_sp,SPY_SP),
'$get_value'(spy_gn,SPY_GN),
'$access_yap_flags'(10,SPY_CREEP),
'$get_value'(spy_cl,SPY_CL),
'$get_value'(spy_leap,_Leap),
'$set_value'('$break',NBL),
current_output(OutStream), current_input(InpStream),
'$format'(user_error, "[ Break (level ~w) ]~n", [NBL]),
'$live',
!,
'$set_value'('$live',true),
'$set_value'(spy_sl,SPY_SL),
'$get_value'(spy_fs,SPY_FS),
'$set_value'(spy_sp,SPY_SP),
'$set_value'(spy_gn,SPY_GN),
'$set_yap_flags'(10,SPY_CREEP),
'$set_value'(spy_cl,SPY_CL),
'$set_value'(spy_leap,_Leap),
set_input(InpStream), set_output(OutStream),
'$set_value'('$break',BL).
'$csult'(V) :- var(V), !,
throw(error(instantiation_error,consult(V))).
'$csult'([]) :- !.
'$csult'([-F|L]) :- !, '$reconsult'(F), '$csult'(L).
'$csult'([F|L]) :- '$consult'(F), '$csult'(L).
'$consult'(V) :- var(V), !,
throw(error(instantiation_error,consult(V))).
'$consult'([]) :- !.
'$consult'([F|Fs]) :- !,
'$consult'(F),
'$consult'(Fs).
'$consult'(X) :- atom(X), !,
'$find_in_path'(X,Y),
( open(Y,'$csult',Stream), !,
'$record_loaded'(Stream),
'$consult'(X,Stream),
close(Stream)
;
throw(error(permission_error(input,stream,Y),consult(X)))
).
'$consult'(M:X) :- !,
'$mod_switch'(M,'$consult'(X)).
'$consult'(library(X)) :- !,
'$find_in_path'(library(X),Y),
( open(Y,'$csult',Stream), !,
'$record_loaded'(Stream),
'$consult'(library(X),Stream), close(Stream)
;
throw(error(permission_error(input,stream,library(X)),consult(library(X))))
).
'$consult'(V) :-
throw(error(type_error(atom,V),consult(V))).
'$consult'(F,Stream) :-
'$access_yap_flags'(8, 2), % SICStus Prolog compatibility
!,
'$reconsult'(F,Stream).
'$consult'(F,Stream) :-
'$getcwd'(OldD),
'$get_value'('$consulting_file',OldF),
'$set_consulting_file'(Stream),
H0 is heapused, T0 is cputime,
current_stream(File,_,Stream),
'$start_consult'(consult,File,LC),
'$get_value'('$consulting',Old),
'$set_value'('$consulting',true),
'$recorda'('$initialisation','$',_),
( '$get_value'('$verbose',on) ->
tab(user_error,LC),
'$format'(user_error, "[ consulting ~w... ]~n", [F])
; true ),
'$loop'(Stream,consult),
'$end_consult',
( LC == 0 -> prompt(_,' |: ') ; true),
( '$get_value'('$verbose',on) ->
tab(user_error,LC) ;
true ),
H is heapused-H0, T is cputime-T0,
( '$get_value'('$verbose',off) ->
true
;
'$format'(user_error, "[ ~w consulted ~w bytes in ~w seconds ]~n", [F,H,T])
),
'$set_value'('$consulting',Old),
'$set_value'('$consulting_file',OldF),
'$cd'(OldD),
!.
'$loaded'(Stream) :-
'$file_name'(Stream,F),
'$recorded'('$loaded',F,_), !.
'$record_loaded'(user).
'$record_loaded'(user_input).
'$record_loaded'(Stream) :-
'$loaded'(Stream), !.
'$record_loaded'(Stream) :-
'$file_name'(Stream,F),
'$recorda'('$loaded',F,_).
'$set_consulting_file'(user) :- !,
'$set_value'('$consulting_file',user_input).
'$set_consulting_file'(user_input) :- !,
'$set_value'('$consulting_file',user_input).
'$set_consulting_file'(Stream) :-
'$file_name'(Stream,F),
'$set_value'('$consulting_file',F),
'$set_consulting_dir'(F).
%
% Use directory where file exists
%
'$set_consulting_dir'(F) :-
atom_codes(F,S),
'$strip_file_for_scd'(S,Dir,Unsure,Unsure),
'$cd'(Dir).
%
% The algorithm: I have two states, one for what I am sure will be an answer,
% the other for what I have found so far.
%
'$strip_file_for_scd'([], [], _, _).
'$strip_file_for_scd'([D|L], Out, Out, Cont) :-
'$dir_separator'(D), !,
'$strip_file_for_scd'(L, Cont, [D|C2], C2).
'$strip_file_for_scd'([F|L], Out, Cont, [F|C2]) :-
'$strip_file_for_scd'(L, Out, Cont, C2).
'$loop'(Stream,Status) :-
'$current_module'(OldModule),
'$change_alias_to_stream'('$loop_stream',Stream),
repeat,
( current_stream(_,_,Stream) -> true
; '$current_module'(_,OldModule), '$abort_loop'(Stream)
),
prompt('| '), prompt(_,'| '),
'$system_catch'('$enter_command'(Stream,Status), Error,
user:'$LoopError'(Error)),
!,
'$exec_initialisation_goals',
'$current_module'(_,OldModule).
'$enter_command'(Stream,Status) :-
'$read_vars'(Stream,Command,Vars),
'$command'(Command,Vars,Status).
'$abort_loop'(Stream) :-
throw(permission_error(input,closed_stream,Stream), loop).
/* General purpose predicates */
'$append'([], L, L) .
'$append'([H|T], L, [H|R]) :-
'$append'(T, L, R).
'$head_and_body'((H:-B),H,B) :- !.
'$head_and_body'(H,H,true).
%
% split head and body, generate an error if body is unbound.
%
'$check_head_and_body'((H:-B),H,B,P) :- !,
'$check_head'(H,P).
'$check_head_and_body'(H,H,true,P) :-
'$check_head'(H,P).
'$check_head'(H,P) :- var(H), !,
throw(error(instantiation_error,P)).
'$check_head'(H,P) :- number(H), !,
throw(error(type_error(callable,H),P)).
'$check_head'(H,P) :- db_reference(H), !,
throw(error(type_error(callable,H),P)).
'$check_head'(_,_).
% Path predicates
'$exists'(F,Mode) :- '$get_value'(fileerrors,V), '$set_value'(fileerrors,0),
( open(F,Mode,S), !, close(S), '$set_value'(fileerrors,V);
'$set_value'(fileerrors,V), fail).
'$find_in_path'(user,user_input) :- !.
'$find_in_path'(user_input,user_input) :- !.
'$find_in_path'(library(File),NewFile) :- !,
'$find_library_in_path'(File, NewFile).
'$find_in_path'(File,File) :- '$exists'(File,'$csult'), !.
'$find_in_path'(File,NewFile) :- name(File,FileStr),
'$search_in_path'(FileStr,NewFile),!.
'$find_in_path'(File,File).
'$find_library_in_path'(File, NewFile) :-
user:library_directory(Dir),
atom_codes(File,FileS),
atom_codes(Dir,DirS),
'$dir_separator'(A),
'$append'(DirS,[A|FileS],NewS),
atom_codes(NewFile,NewS),
'$exists'(NewFile,'$csult'), !.
'$find_library_in_path'(File, NewFile) :-
'$getenv'('YAPLIBDIR', LibDir),
'$dir_separator'(A),
atom_codes(File,FileS),
atom_codes(LibDir,Dir1S),
'$append'(Dir1S,[A|"library"],DirS),
'$append'(DirS,[A|FileS],NewS),
atom_codes(NewFile,NewS),
'$exists'(NewFile,'$csult'), !.
'$find_library_in_path'(File, File).
'$search_in_path'(File,New) :-
'$recorded'('$path',Path,_), '$append'(Path,File,NewStr),
name(New,NewStr),'$exists'(New,'$csult').
path(Path) :- findall(X,'$in_path'(X),Path).
'$in_path'(X) :- '$recorded'('$path',S,_),
( S == "" -> X = '.' ;
name(X,S) ).
add_to_path(New) :- add_to_path(New,last).
add_to_path(New,Pos) :- '$check_path'(New,Str), '$add_to_path'(Str,Pos).
'$add_to_path'(New,_) :- '$recorded'('$path',New,R), erase(R), fail.
'$add_to_path'(New,last) :- !, '$recordz'('$path',New,_).
'$add_to_path'(New,first) :- '$recorda'('$path',New,_).
remove_from_path(New) :- '$check_path'(New,Path),
'$recorded'('$path',Path,R), erase(R).
'$check_path'(At,SAt) :- atom(At), !, name(At,S), '$check_path'(S,SAt).
'$check_path'([],[]).
'$check_path'([Ch],[Ch]) :- '$dir_separator'(Ch), !.
'$check_path'([Ch],[Ch,A]) :- !, integer(Ch), '$dir_separator'(A).
'$check_path'([N|S],[N|SN]) :- integer(N), '$check_path'(S,SN).
% term expansion
%
% return two arguments: Expanded0 is the term after "USER" expansion.
% Expanded is the final expanded term.
%
'$precompile_term'(Term, Expanded0, Expanded) :-
(
'$access_yap_flags'(9,1) /* strict_iso on */
->
'$expand_term_modules'(Term, Expanded0, Expanded),
'$check_iso_strict_clause'(Expanded0)
;
'$expand_term_modules'(Term, Expanded0, ExpandedI),
'$expand_array_accesses_in_term'(ExpandedI,Expanded)
).
expand_term(Term,Expanded) :-
( \+ '$undefined'(user:term_expansion(_,_)),
user:term_expansion(Term,Expanded)
;
'$expand_term_grammar'(Term,Expanded)
),
!.
%
% Grammar Rules expansion
%
'$expand_term_grammar'((A-->B), C) :-
'$translate_rule'((A-->B),C), !.
'$expand_term_grammar'(A, A).
%
% Arithmetic expansion
%
'$expand_term_arith'(G1, G2) :-
'$get_value'('$c_arith',true),
'$c_arith'(G1, G2), !.
'$expand_term_arith'(G,G).
%
% Arithmetic expansion
%
'$expand_array_accesses_in_term'(Expanded0,ExpandedF) :-
'$array_refs_compiled',
'$c_arrays'(Expanded0,ExpandedF), !.
'$expand_array_accesses_in_term'(Expanded,Expanded).
%
% Module system expansion
%
'$expand_term_modules'(A,B,C) :- '$module_expansion'(A,B,C), !.
'$expand_term_modules'(A,A,A).
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
% catch/throw implementation
catch(G,C,A) :- var(G), !,
throw(error(instantiation_error,catch(G,C,A))).
catch(G,C,A) :- number(G), !,
throw(error(type_error(callable,G),catch(G,C,A))).
catch(R,C,A) :- db_reference(R), !,
throw(error(type_error(callable,R),catch(R,C,A))).
catch(G,C,A) :-
'$catch'(G,C,A).
'$catch'(G,C,A) :-
'$get_value'('$catch', I),
I1 is I+1,
'$set_value'('$catch', I1),
'$current_module'(M),
'$catch'(G,C,A,I,M).
'$catch'(G,_,_,I,_) :-
% on entry we push the catch choice point
X is '$last_choice_pt',
'$catch_call'(X,G,I).
% someone sent us a throw.
'$catch'(_,C,A,_,M) :-
array_element('$catch_queue', 1, X), X \= '$',
update_array('$catch_queue', 1, '$'),
array_element('$catch_queue', 0, catch(_,Lev,Q)),
update_array('$catch_queue', 0, Q),
'$db_clean_queues'(Lev),
( C=X -> '$current_module'(_,M), '$execute'(A) ; throw(X)).
% normal exit: make sure we only erase what we should erase!
'$catch'(_,_,_,I,_) :-
array_element('$catch_queue', 0, OldCatch),
'$erase_catch_elements'(OldCatch, I, Catch),
update_array('$catch_queue', 0, Catch),
fail.
'$erase_catch_elements'(catch(X, J, P), I, Catch) :-
J >= I, !,
'$erase_catch_elements'(P, I, Catch).
'$erase_catch_elements'(Catch, _, Catch).
'$catch_call'(X,G,I) :-
array_element('$catch_queue', 0, OldCatch),
update_array('$catch_queue', 0, catch(X,I,OldCatch)),
'$execute'(G),
( % on exit remove the catch
array_element('$catch_queue', 0, catch(X,I,Catch)),
update_array('$catch_queue', 0, Catch)
;
% on backtracking reinstate the catch before backtracking to G
array_element('$catch_queue', 0, Catch),
update_array('$catch_queue', 0, catch(X,I,Catch)),
fail
).
%
% system_catch is like catch, but it avoids the overhead of a full
% meta-call by calling '$execute0' and '$mod_switch' instead of $execute.
% This way it
% also avoids module preprocessing and goal_expansion
%
'$system_catch'(G,C,A) :-
'$get_value'('$catch', I),
I1 is I+1,
'$set_value'('$catch', I1),
'$current_module'(M),
'$system_catch'(G,C,A,I,M).
'$system_catch'(G,_,_,I,_) :-
% on entry we push the catch choice point
X is '$last_choice_pt',
'$system_catch_call'(X,G,I).
% someone sent us a throw.
'$system_catch'(_,C,A,_,M0) :-
array_element('$catch_queue', 1, X), X \= '$',
update_array('$catch_queue', 1, '$'),
array_element('$catch_queue', 0, catch(_,Lev,Q)),
'$db_clean_queues'(Lev),
update_array('$catch_queue', 0, Q),
( C=X ->
'$current_module'(_,M0),
(A = M:G -> '$mod_switch'(M,G) ; '$mod_switch'(M0,A))
;
throw(X)
).
% normal exit: make sure we only erase what we should erase!
'$system_catch'(_,_,_,I,_) :-
array_element('$catch_queue', 0, OldCatch),
'$erase_catch_elements'(OldCatch, I, Catch),
update_array('$catch_queue', 0, Catch),
fail.
'$system_catch_call'(X,G,I) :-
array_element('$catch_queue', 0, OldCatch),
update_array('$catch_queue', 0, catch(X,I,OldCatch)),
'$execute0'(G),
( % on exit remove the catch
array_element('$catch_queue', 0, catch(X,I,Catch)),
update_array('$catch_queue', 0, Catch)
;
% on backtracking reinstate the catch before backtracking to G
array_element('$catch_queue', 0, Catch),
update_array('$catch_queue', 0, catch(X,I,Catch)),
fail
).
throw(A) :-
% fetch the point to jump to
array_element('$catch_queue', 0, catch(X,_,_)), !,
% now explain why we are jumping.
update_array('$catch_queue', 1, A),
'$$cut_by'(X),
fail.
throw(G) :-
write(user_error,system_error_at(G)),
abort.
'$check_list'(V, _) :- var(V), !.
'$check_list'([], _) :- !.
'$check_list'([_|B], T) :- !,
'$check_list'(B,T).
'$check_list'(S, T) :-
throw(error(type_error(list,S),T)).
'$clean_catch_and_throw' :-
'$set_value'('$catch', 0),
fail.
'$clean_catch_and_throw' :-
'$recorded'('$catch',_,R),
erase(R),
fail.
'$clean_catch_and_throw' :-
'$recorded'('$throw',_,R),
erase(R),
fail.
'$clean_catch_and_throw'.
'$exec_initialisation_goals' :-
'$recorded'('$blocking_code',_,R),
erase(R),
fail.
% system goals must be performed first
'$exec_initialisation_goals' :-
'$recorded'('$system_initialisation',G,R),
erase(R),
G \= '$',
call(G),
fail.
'$exec_initialisation_goals' :-
'$recorded'('$initialisation',G,R),
erase(R),
G \= '$',
'$system_catch'(once(G), Error, user:'$LoopError'(Error)),
fail.
'$exec_initialisation_goals'.
'$run_toplevel_hooks' :-
'$get_value'('$break',0),
'$recorded'('$toplevel_hooks',H,_), !,
( '$execute'(H) -> true ; true).
'$run_toplevel_hooks'.