This repository has been archived on 2023-08-20. You can view files and clone it, but cannot push or open issues or pull requests.
yap-6.3/packages/ProbLog/problog_learning.yap
2010-08-26 14:41:18 +02:00

1721 lines
52 KiB
Prolog

%%% -*- Mode: Prolog; -*-
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
%
% $Date: 2010-08-25 15:45:22 +0200 (Wed, 25 Aug 2010) $
% $Revision: 4692 $
%
% This file is part of ProbLog
% http://dtai.cs.kuleuven.be/problog
%
% ProbLog was developed at Katholieke Universiteit Leuven
%
% Copyright 2008, 2009, 2010
% Katholieke Universiteit Leuven
%
% Main authors of this file:
% Bernd Gutmann
%
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
%
% Artistic License 2.0
%
% Copyright (c) 2000-2006, The Perl Foundation.
%
% Everyone is permitted to copy and distribute verbatim copies of this
% license document, but changing it is not allowed. Preamble
%
% This license establishes the terms under which a given free software
% Package may be copied, modified, distributed, and/or
% redistributed. The intent is that the Copyright Holder maintains some
% artistic control over the development of that Package while still
% keeping the Package available as open source and free software.
%
% You are always permitted to make arrangements wholly outside of this
% license directly with the Copyright Holder of a given Package. If the
% terms of this license do not permit the full use that you propose to
% make of the Package, you should contact the Copyright Holder and seek
% a different licensing arrangement. Definitions
%
% "Copyright Holder" means the individual(s) or organization(s) named in
% the copyright notice for the entire Package.
%
% "Contributor" means any party that has contributed code or other
% material to the Package, in accordance with the Copyright Holder's
% procedures.
%
% "You" and "your" means any person who would like to copy, distribute,
% or modify the Package.
%
% "Package" means the collection of files distributed by the Copyright
% Holder, and derivatives of that collection and/or of those files. A
% given Package may consist of either the Standard Version, or a
% Modified Version.
%
% "Distribute" means providing a copy of the Package or making it
% accessible to anyone else, or in the case of a company or
% organization, to others outside of your company or organization.
%
% "Distributor Fee" means any fee that you charge for Distributing this
% Package or providing support for this Package to another party. It
% does not mean licensing fees.
%
% "Standard Version" refers to the Package if it has not been modified,
% or has been modified only in ways explicitly requested by the
% Copyright Holder.
%
% "Modified Version" means the Package, if it has been changed, and such
% changes were not explicitly requested by the Copyright Holder.
%
% "Original License" means this Artistic License as Distributed with the
% Standard Version of the Package, in its current version or as it may
% be modified by The Perl Foundation in the future.
%
% "Source" form means the source code, documentation source, and
% configuration files for the Package.
%
% "Compiled" form means the compiled bytecode, object code, binary, or
% any other form resulting from mechanical transformation or translation
% of the Source form.
%
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
%
% Permission for Use and Modification Without Distribution
%
% (1) You are permitted to use the Standard Version and create and use
% Modified Versions for any purpose without restriction, provided that
% you do not Distribute the Modified Version.
%
% Permissions for Redistribution of the Standard Version
%
% (2) You may Distribute verbatim copies of the Source form of the
% Standard Version of this Package in any medium without restriction,
% either gratis or for a Distributor Fee, provided that you duplicate
% all of the original copyright notices and associated disclaimers. At
% your discretion, such verbatim copies may or may not include a
% Compiled form of the Package.
%
% (3) You may apply any bug fixes, portability changes, and other
% modifications made available from the Copyright Holder. The resulting
% Package will still be considered the Standard Version, and as such
% will be subject to the Original License.
%
% Distribution of Modified Versions of the Package as Source
%
% (4) You may Distribute your Modified Version as Source (either gratis
% or for a Distributor Fee, and with or without a Compiled form of the
% Modified Version) provided that you clearly document how it differs
% from the Standard Version, including, but not limited to, documenting
% any non-standard features, executables, or modules, and provided that
% you do at least ONE of the following:
%
% (a) make the Modified Version available to the Copyright Holder of the
% Standard Version, under the Original License, so that the Copyright
% Holder may include your modifications in the Standard Version. (b)
% ensure that installation of your Modified Version does not prevent the
% user installing or running the Standard Version. In addition, the
% modified Version must bear a name that is different from the name of
% the Standard Version. (c) allow anyone who receives a copy of the
% Modified Version to make the Source form of the Modified Version
% available to others under (i) the Original License or (ii) a license
% that permits the licensee to freely copy, modify and redistribute the
% Modified Version using the same licensing terms that apply to the copy
% that the licensee received, and requires that the Source form of the
% Modified Version, and of any works derived from it, be made freely
% available in that license fees are prohibited but Distributor Fees are
% allowed.
%
% Distribution of Compiled Forms of the Standard Version or
% Modified Versions without the Source
%
% (5) You may Distribute Compiled forms of the Standard Version without
% the Source, provided that you include complete instructions on how to
% get the Source of the Standard Version. Such instructions must be
% valid at the time of your distribution. If these instructions, at any
% time while you are carrying out such distribution, become invalid, you
% must provide new instructions on demand or cease further
% distribution. If you provide valid instructions or cease distribution
% within thirty days after you become aware that the instructions are
% invalid, then you do not forfeit any of your rights under this
% license.
%
% (6) You may Distribute a Modified Version in Compiled form without the
% Source, provided that you comply with Section 4 with respect to the
% Source of the Modified Version.
%
% Aggregating or Linking the Package
%
% (7) You may aggregate the Package (either the Standard Version or
% Modified Version) with other packages and Distribute the resulting
% aggregation provided that you do not charge a licensing fee for the
% Package. Distributor Fees are permitted, and licensing fees for other
% components in the aggregation are permitted. The terms of this license
% apply to the use and Distribution of the Standard or Modified Versions
% as included in the aggregation.
%
% (8) You are permitted to link Modified and Standard Versions with
% other works, to embed the Package in a larger work of your own, or to
% build stand-alone binary or bytecode versions of applications that
% include the Package, and Distribute the result without restriction,
% provided the result does not expose a direct interface to the Package.
%
% Items That are Not Considered Part of a Modified Version
%
% (9) Works (including, but not limited to, modules and scripts) that
% merely extend or make use of the Package, do not, by themselves, cause
% the Package to be a Modified Version. In addition, such works are not
% considered parts of the Package itself, and are not subject to the
% terms of this license.
%
% General Provisions
%
% (10) Any use, modification, and distribution of the Standard or
% Modified Versions is governed by this Artistic License. By using,
% modifying or distributing the Package, you accept this license. Do not
% use, modify, or distribute the Package, if you do not accept this
% license.
%
% (11) If your Modified Version has been derived from a Modified Version
% made by someone other than you, you are nevertheless required to
% ensure that your Modified Version complies with the requirements of
% this license.
%
% (12) This license does not grant you the right to use any trademark,
% service mark, tradename, or logo of the Copyright Holder.
%
% (13) This license includes the non-exclusive, worldwide,
% free-of-charge patent license to make, have made, use, offer to sell,
% sell, import and otherwise transfer the Package with respect to any
% patent claims licensable by the Copyright Holder that are necessarily
% infringed by the Package. If you institute patent litigation
% (including a cross-claim or counterclaim) against any party alleging
% that the Package constitutes direct or contributory patent
% infringement, then this Artistic License to you shall terminate on the
% date that such litigation is filed.
%
% (14) Disclaimer of Warranty: THE PACKAGE IS PROVIDED BY THE COPYRIGHT
% HOLDER AND CONTRIBUTORS "AS IS' AND WITHOUT ANY EXPRESS OR IMPLIED
% WARRANTIES. THE IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A
% PARTICULAR PURPOSE, OR NON-INFRINGEMENT ARE DISCLAIMED TO THE EXTENT
% PERMITTED BY YOUR LOCAL LAW. UNLESS REQUIRED BY LAW, NO COPYRIGHT
% HOLDER OR CONTRIBUTOR WILL BE LIABLE FOR ANY DIRECT, INDIRECT,
% INCIDENTAL, OR CONSEQUENTIAL DAMAGES ARISING IN ANY WAY OUT OF THE USE
% OF THE PACKAGE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
%
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
:- module(learning,[do_learning/1,
do_learning/2,
set_learning_flag/2,
learning_flag/2,
learning_flags/0,
problog_help/0,
set_problog_flag/2,
problog_flag/2,
problog_flags/0,
auto_alpha/0
]).
% switch on all the checks to reduce bug searching time
:- style_check(all).
:- yap_flag(unknown,error).
% load modules from the YAP library
:- ensure_loaded(library(lists)).
:- ensure_loaded(library(random)).
:- ensure_loaded(library(system)).
% load our own modules
:- ensure_loaded(problog).
:- ensure_loaded('problog/logger').
:- ensure_loaded('problog/flags').
:- ensure_loaded('problog/os').
% used to indicate the state of the system
:- dynamic values_correct/0.
:- dynamic learning_initialized/0.
:- dynamic current_iteration/1.
:- dynamic example_count/1.
:- dynamic query_probability_intern/2.
:- dynamic query_gradient_intern/4.
:- dynamic last_mse/1.
% used to identify queries which have identical proofs
:- dynamic query_is_similar/2.
:- dynamic query_md5/3.
:- assert_static(user:(example(A,B,C,=) :- current_predicate(example/3), example(A,B,C))).
:- assert_static(user:(test_example(A,B,C,=) :- current_predicate(test_example/3), test_example(A,B,C))).
%========================================================================
%=
%=
%=
%========================================================================
my_format(Level,String,Arguments) :-
problog_flag(learning_verbosity_level,V_Level),
(
V_Level >= Level
->
(format(String,Arguments),flush_output(user));
true
).
%========================================================================
%= store the facts with the learned probabilities to a file
%= if F is a variable, a filename based on the current iteration is used
%=
%========================================================================
save_model:-
current_iteration(Iteration),
atomic_concat(['factprobs_',Iteration,'.pl'],Filename),
problog_flag(output_directory,Dir),
concat_path_with_filename(Dir,Filename,Filename2),
export_facts(Filename2).
%========================================================================
%= store the current succes probabilities for training and test examples
%=
%========================================================================
save_predictions:-
current_iteration(Iteration),
atomic_concat(['predictions_',Iteration,'.pl'],Filename),
problog_flag(output_directory,Dir),
concat_path_with_filename(Dir,Filename,Filename2),
open(Filename2,'append',Handle),
format(Handle,"%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%\n",[]),
format(Handle,"% Iteration, train/test, QueryID, Query, GroundTruth, Prediction %\n",[]),
format(Handle,"%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%\n",[]),
!,
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
% start save prediction test examples
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
( % go over all test examples
current_predicate(user:test_example/4),
user:test_example(Query_ID,Query,TrueQueryProb,_),
query_probability(Query_ID,LearnedQueryProb),
format(Handle,'ex(~q,test,~q,~q,~10f,~10f).\n',
[Iteration,Query_ID,Query,TrueQueryProb,LearnedQueryProb]),
fail; % go to next test example
true
),
!,
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
% stop save prediction test examples
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
% start save prediction training examples
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
( % go over all training examples
current_predicate(user:example/4),
user:example(Query_ID,Query,TrueQueryProb,_),
query_probability(Query_ID,LearnedQueryProb),
format(Handle,'ex(~q,train,~q,~q,~10f,~10f).\n',
[Iteration,Query_ID,Query,TrueQueryProb,LearnedQueryProb]),
fail; % go to next training example
true
),
!,
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
% stop save prediction training examples
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
format(Handle,'~3n',[]),
close(Handle).
%========================================================================
%= find out whether some example IDs are used more than once
%= if so, complain and stop
%=
%========================================================================
check_examples :-
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
% Check example IDs
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
(
(current_predicate(user:example/4),user:example(ID,_,_,_), \+ atomic(ID))
->
(
format(user_error,'The example id of training example ~q ',[ID]),
format(user_error,'is not atomic (e.g foo42, 23, bar, ...).~n',[]),
throw(error(examples))
); true
),
(
(current_predicate(user:test_example/4),user:test_example(ID,_,_,_), \+ atomic(ID))
->
(
format(user_error,'The example id of test example ~q ',[ID]),
format(user_error,'is not atomic (e.g foo42, 23, bar, ...).~n',[]),
throw(error(examples))
); true
),
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
% Check example probabilities
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
(
(current_predicate(user:example/4),user:example(ID,_,P,_), (\+ number(P); P>1 ; P<0))
->
(
format(user_error,'The training example ~q does not have a valid probaility value (~q).~n',[ID,P]),
throw(error(examples))
); true
),
(
(current_predicate(user:test_example/4),user:test_example(ID,_,P,_), (\+ number(P); P>1 ; P<0))
->
(
format(user_error,'The test example ~q does not have a valid probaility value (~q).~n',[ID,P]),
throw(error(examples))
); true
),
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
% Check that no example ID is repeated,
% and if it is repeated make sure the query is the same
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
(
(
(
current_predicate(user:example/4),
user:example(ID,QueryA,_,_),
user:example(ID,QueryB,_,_),
QueryA \= QueryB
) ;
(
current_predicate(user:test_example/4),
user:test_example(ID,QueryA,_,_),
user:test_example(ID,QueryB,_,_),
QueryA \= QueryB
);
(
current_predicate(user:example/4),
current_predicate(user:test_example/4),
user:example(ID,QueryA,_,_),
user:test_example(ID,QueryB,_,_),
QueryA \= QueryB
)
)
->
(
format(user_error,'The example id ~q is used several times.~n',[ID]),
throw(error(examples))
); true
).
%========================================================================
%= initialize everything and perform Iterations times gradient descent
%= can be called several times
%= if it is called with an epsilon parameter, it stops when the change
%= in the MSE is smaller than epsilon
%========================================================================
do_learning(Iterations) :-
do_learning(Iterations,-1).
do_learning(Iterations,Epsilon) :-
current_predicate(user:example/4),
!,
integer(Iterations),
number(Epsilon),
Iterations>0,
do_learning_intern(Iterations,Epsilon).
do_learning(_,_) :-
format(user_error,'~n~nWarning: No training examples specified !!!~n~n',[]).
do_learning_intern(0,_) :-
!.
do_learning_intern(Iterations,Epsilon) :-
Iterations>0,
init_learning,
current_iteration(CurrentIteration),
!,
retractall(current_iteration(_)),
!,
NextIteration is CurrentIteration+1,
assert(current_iteration(NextIteration)),
EndIteration is CurrentIteration+Iterations-1,
my_format(1,'~nIteration ~d of ~d~n',[CurrentIteration,EndIteration]),
logger_set_variable(iteration,CurrentIteration),
logger_start_timer(duration),
mse_testset,
once(ground_truth_difference),
gradient_descent,
problog_flag(log_frequency,Log_Frequency),
(
( Log_Frequency>0, 0 =:= CurrentIteration mod Log_Frequency)
->
(
once(save_predictions),
once(save_model)
);
true
),
update_values,
(
last_mse(Last_MSE)
->
(
retractall(last_mse(_)),
logger_get_variable(mse_trainingset,Current_MSE),
assert(last_mse(Current_MSE)),
!,
MSE_Diff is abs(Last_MSE-Current_MSE)
); (
logger_get_variable(mse_trainingset,Current_MSE),
assert(last_mse(Current_MSE)),
MSE_Diff is Epsilon+1
)
),
(
(problog_flag(rebuild_bdds,BDDFreq),BDDFreq>0,0 =:= CurrentIteration mod BDDFreq)
->
(
retractall(values_correct),
once(delete_all_queries),
once(init_queries)
); true
),
!,
logger_stop_timer(duration),
logger_write_data,
RemainingIterations is Iterations-1,
(
MSE_Diff>Epsilon
->
do_learning_intern(RemainingIterations,Epsilon);
true
).
%========================================================================
%= find proofs and build bdds for all training and test examples
%=
%=
%========================================================================
init_learning :-
learning_initialized,
!.
init_learning :-
check_examples,
logger_write_header,
my_format(1,'Initializing everything~n',[]),
empty_output_directory,
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
% Delete the BDDs from the previous run if they should
% not be reused
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
(
(
problog_flag(reuse_initialized_bdds,true),
problog_flag(rebuild_bdds,0)
)
->
true;
delete_all_queries
),
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
% Check, if continuous facts are used.
% if yes, switch to problog_exact
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
problog_flag(init_method,(_,_,_,_,OldCall)),
(
(
continuous_fact(_),
OldCall\=problog_exact_save(_,_,_,_,_)
)
->
(
format('Theory uses continuous facts.~nWill use problog_exact/3 as initalization method.~2n',[]),
set_problog_flag(init_method,(Query,Probability,BDDFile,ProbFile,problog_exact_save(Query,Probability,_Status,BDDFile,ProbFile)))
);
true
),
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
% start count test examples
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
bb_put(test_examples,0),
( % go over all test examples
current_predicate(user:test_example/4),
user:test_example(_,_,_,_),
bb_get(test_examples, OldCounter),
NewCounter is OldCounter+1,
bb_put(test_examples,NewCounter),
fail; % go to next text example
true
),
bb_delete(test_examples,TestExampleCount),
my_format(3,'~q test examples~n',[TestExampleCount]),
!,
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
% stop count test examples
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
% start count training examples
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
bb_put(training_examples,0),
( % go over all training examples
current_predicate(user:example/4),
user:example(_,_,_,_),
bb_get(training_examples, OldCounter),
NewCounter is OldCounter+1,
bb_put(training_examples,NewCounter),
fail; %go to next training example
true
),
bb_delete(training_examples,TrainingExampleCount),
assert(example_count(TrainingExampleCount)),
my_format(3,'~q training examples~n',[TrainingExampleCount]),
!,
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
% stop count training examples
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
% set learning rate and alpha
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
(
problog_flag(learning_rate,examples)
->
set_problog_flag(learning_rate,TrainingExampleCount);
true
),
(
problog_flag(alpha,auto)
->
auto_alpha;
true
),
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
% build BDD script for every example
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
once(initialize_fact_probabilities),
once(init_queries),
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
% done
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
assert(current_iteration(0)),
assert(learning_initialized),
my_format(1,'~n',[]).
%========================================================================
%=
%=
%=
%========================================================================
delete_all_queries :-
problog_flag(bdd_directory,BDD_Directory),
empty_bdd_directory(BDD_Directory),
retractall(query_is_similar(_,_)),
retractall(query_md5(_,_,_)).
empty_output_directory :-
problog_flag(output_directory,Directory),
empty_output_directory(Directory).
%========================================================================
%= This predicate goes over all training and test examples,
%= calls the inference method of ProbLog and stores the resulting
%= BDDs
%========================================================================
init_queries :-
my_format(2,'Build BDDs for examples~n',[]),
( % go over all test examples
current_predicate(user:test_example/4),
user:test_example(ID,Query,Prob,_),
my_format(3,' test example ~q: ~q~n',[ID,Query]),
flush_output(user),
init_one_query(ID,Query,test),
fail; % go to next test example
true
),
( % go over all training examples
current_predicate(user:example/4),
user:example(ID,Query,Prob,_),
my_format(3,' training example ~q: ~q~n',[ID,Query]),
flush_output(user),
init_one_query(ID,Query,training),
fail; %go to next training example
true
).
bdd_input_file(Filename) :-
problog_flag(output_directory,Dir),
concat_path_with_filename(Dir,'input.txt',Filename).
init_one_query(QueryID,Query,Type) :-
bdd_input_file(Probabilities_File),
problog_flag(bdd_directory,Query_Directory),
atomic_concat(['query_',QueryID],Filename1),
concat_path_with_filename(Query_Directory,Filename1,Filename),
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
% if BDD file does not exist, call ProbLog
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
(
file_exists(Filename)
->
my_format(3,' Reuse existing BDD ~q~n~n',[Filename]);
(
problog_flag(init_method,(Query,_Prob,Filename,Probabilities_File,Call)),
once(call(Call)),
delete_file(Probabilities_File)
)
),
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
% check wether this BDD is similar to another BDD
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
(
problog_flag(check_duplicate_bdds,true)
->
(
calc_md5(Filename,Query_MD5),
(
query_md5(OtherQueryID,Query_MD5,Type)
->
(
assert(query_is_similar(QueryID,OtherQueryID)),
my_format(3, '~q is similar to ~q~2n', [QueryID,OtherQueryID])
);
assert(query_md5(QueryID,Query_MD5,Type))
)
);
true
).
%========================================================================
%= set all unknown fact probabilities to random values
%=
%=
%========================================================================
initialize_fact_probabilities :-
( % go over all tunable facts
tunable_fact(FactID,_),
problog_flag(probability_initializer,(FactID,Probability,Query)),
once(call(Query)),
set_fact_probability(FactID,Probability),
fail; % go to next tunable fact
true
).
random_probability(_FactID,Probability) :-
% use probs around 0.5 to not confuse k-best search
random(Random),
Probability is 0.5+(Random-0.5)/100.
%========================================================================
%= updates all values of query_probability/2 and query_gradient/4
%= should be called always before these predicates are accessed
%= if the old values are still valid, nothing happens
%========================================================================
update_values :-
values_correct,
!.
update_values :-
\+ values_correct,
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
% delete old values
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
once(retractall(query_probability_intern(_,_))),
once(retractall(query_gradient_intern(_,_,_,_))),
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
% start write current probabilities to file
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
bdd_input_file(Probabilities_File),
(
file_exists(Probabilities_File)
->
delete_file(Probabilities_File);
true
),
open(Probabilities_File,'write',Handle),
( % go over all probabilistic facts
get_fact_probability(ID,Prob),
inv_sigmoid(Prob,Value),
(
non_ground_fact(ID)
->
format(Handle,'@x~q_*~n~10f~n',[ID,Value]);
format(Handle,'@x~q~n~10f~n',[ID,Value])
),
fail; % go to next probabilistic fact
true
),
( % go over all continuous facts
get_continuous_fact_parameters(ID,gaussian(Mu,Sigma)),
%SigmaL is log(Sigma),
SigmaL=Sigma,
format(Handle,'@x~q_*~n0~n0~n~10f;~10f~n',[ID,Mu,SigmaL]),
fail; % go to next continuous fact
true
),
close(Handle),
!,
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
% stop write current probabilities to file
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
assert(values_correct).
%========================================================================
%=
%=
%=
%========================================================================
update_query_cleanup(QueryID) :-
(
(query_is_similar(QueryID,_) ; query_is_similar(_,QueryID))
->
% either this query is similar to another or vice versa,
% therefore we don't delete anything
true;
once(retractall(query_gradient_intern(QueryID,_,_,_)))
).
update_query(QueryID,Symbol,What_To_Update) :-
% fixme OS trouble
problog_flag(output_directory,Output_Directory),
problog_flag(bdd_directory,Query_Directory),
bdd_input_file(Probabilities_File),
(
query_is_similar(QueryID,_)
->
% we don't have to evaluate the BDD
my_format(4,'#',[]);
(
problog_flag(sigmoid_slope,Slope),
problog_dir(PD),
((What_To_Update=all;query_is_similar(_,QueryID)) -> Method='g' ; Method='l'),
atomic_concat([PD,
'/problogbdd',
' -i "', Probabilities_File, '"',
' -l "', Query_Directory,'/query_',QueryID, '"',
' -m ', Method,
' -id ', QueryID,
' -sl ', Slope,
' > "',
Output_Directory,
'values.pl"'],Command),
shell(Command,Error),
(
Error = 2
->
throw(error('SimpleCUDD has been interrupted.'));
true
),
(
Error \= 0
->
(
format(user_error,'SimpleCUDD stopped with error code ~q, command was ~q~n',[Error, shell(Command,Error)]),
throw(bdd_error(QueryID,Error)));
true
),
atomic_concat([Output_Directory,'values.pl'],Values_Filename),
(
file_exists(Values_Filename)
->
(
(
once(my_load(Values_Filename,QueryID))
->
true;
(
format(user_error,'ERROR: Tried to read the file ~q but my_load/1 fails.~n~q.~2n',[Values_Filename,update_query(QueryID,Symbol,What_To_Update)]),
throw(error(my_load_fails))
)
);
(
format(user_error,'ERROR: Tried to read the file ~q but it does not exist.~n~q.~2n',[Values_Filename,update_query(QueryID,Symbol,What_To_Update)]),
throw(error(output_file_does_not_exist))
)
)
),
delete_file(Values_Filename),
my_format(4,'~w',[Symbol])
)
),
flush_output(user).
%========================================================================
%= This predicate reads probability and gradient values from the file
%= the gradient ID is a mere check to uncover hidden bugs
%= +Filename +QueryID -QueryProbability
%========================================================================
my_load(File,QueryID) :-
open(File,'read',Handle),
read(Handle,Atom),
once(my_load_intern(Atom,Handle,QueryID)),
close(Handle).
my_load(File,QueryID) :-
format(user_error,'Error at ~q.~2n',[my_load(File,QueryID)]),
throw(error(my_load(File,QueryID))).
my_load_intern(end_of_file,_,_) :-
!.
my_load_intern(query_probability(QueryID,Prob),Handle,QueryID) :-
!,
assert(query_probability_intern(QueryID,Prob)),
read(Handle,X),
my_load_intern(X,Handle,QueryID).
my_load_intern(query_gradient(QueryID,XFactID,Type,Value),Handle,QueryID) :-
!,
atomic_concat(x,StringFactID,XFactID),
atom_number(StringFactID,FactID),
assert(query_gradient_intern(QueryID,FactID,Type,Value)),
read(Handle,X),
my_load_intern(X,Handle,QueryID).
my_load_intern(X,Handle,QueryID) :-
format(user_error,'Unknown atom ~q in results file.~n',[X]),
read(Handle,X2),
my_load_intern(X2,Handle,QueryID).
%========================================================================
%=
%=
%=
%========================================================================
query_probability(QueryID,Prob) :-
(
query_probability_intern(QueryID,Prob)
->
true;
(
query_is_similar(QueryID,OtherQueryID),
query_probability_intern(OtherQueryID,Prob)
)
).
query_gradient(QueryID,Fact,Type,Value) :-
(
query_gradient_intern(QueryID,Fact,Type,Value)
->
true;
(
query_is_similar(QueryID,OtherQueryID),
query_gradient_intern(OtherQueryID,Fact,Type,Value)
)
).
%========================================================================
%=
%=
%=
%========================================================================
% FIXME
ground_truth_difference :-
findall(Diff,(tunable_fact(FactID,GroundTruth),
\+continuous_fact(FactID),
\+ var(GroundTruth),
get_fact_probability(FactID,Prob),
Diff is abs(GroundTruth-Prob)),AllDiffs),
(
AllDiffs=[]
->
(
MinDiff=0.0,
MaxDiff=0.0,
DiffMean=0.0
) ;
(
length(AllDiffs,Len),
sum_list(AllDiffs,AllDiffsSum),
min_list(AllDiffs,MinDiff),
max_list(AllDiffs,MaxDiff),
DiffMean is AllDiffsSum/Len
)
),
logger_set_variable(ground_truth_diff,DiffMean),
logger_set_variable(ground_truth_mindiff,MinDiff),
logger_set_variable(ground_truth_maxdiff,MaxDiff).
%========================================================================
%= Calculates the mse of training and test data
%=
%= -Float
%========================================================================
mse_trainingset_only_for_linesearch(MSE) :-
(
current_predicate(user:example/4)
->
(
update_values,
findall(SquaredError,
(user:example(QueryID,_Query,QueryProb,Type),
once(update_query(QueryID,'.',probability)),
query_probability(QueryID,CurrentProb),
once(update_query_cleanup(QueryID)),
(
(Type == '='; (Type == '<', CurrentProb>QueryProb); (Type=='>',CurrentProb<QueryProb))
->
SquaredError is (CurrentProb-QueryProb)**2;
SquaredError = 0.0
)
),
AllSquaredErrors),
length(AllSquaredErrors,Length),
sum_list(AllSquaredErrors,SumAllSquaredErrors),
MSE is SumAllSquaredErrors/Length,
my_format(3,' (~8f)~n',[MSE])
); true
),
retractall(values_correct).
mse_testset :-
(
(current_predicate(user:test_example/4),user:test_example(_,_,_,_))
->
(
my_format(2,'MSE_Test ',[]),
update_values,
findall(SquaredError,
(user:test_example(QueryID,_Query,QueryProb,Type),
once(update_query(QueryID,'+',probability)),
query_probability(QueryID,CurrentProb),
once(update_query_cleanup(QueryID)),
(
(Type == '='; (Type == '<', CurrentProb>QueryProb); (Type=='>',CurrentProb<QueryProb))
->
SquaredError is (CurrentProb-QueryProb)**2;
SquaredError = 0.0
)
),
AllSquaredErrors),
length(AllSquaredErrors,Length),
sum_list(AllSquaredErrors,SumAllSquaredErrors),
min_list(AllSquaredErrors,MinError),
max_list(AllSquaredErrors,MaxError),
MSE is SumAllSquaredErrors/Length,
logger_set_variable(mse_testset,MSE),
logger_set_variable(mse_min_testset,MinError),
logger_set_variable(mse_max_testset,MaxError),
my_format(2,' (~8f)~n',[MSE])
); true
).
%========================================================================
%= Calculates the sigmoid function respectivly the inverse of it
%= warning: applying inv_sigmoid to 0.0 or 1.0 will yield +/-inf
%=
%= +Float, -Float
%========================================================================
sigmoid(T,Sig) :-
problog_flag(sigmoid_slope,Slope),
Sig is 1/(1+exp(-T*Slope)).
inv_sigmoid(T,InvSig) :-
problog_flag(sigmoid_slope,Slope),
InvSig is -log(1/T-1)/Slope.
%========================================================================
%= Perform one iteration of gradient descent
%=
%= assumes that everything is initialized, if the current values
%= of query_probability/2 and query_gradient/4 are not up to date
%= they will be recalculated
%= finally, the values_correct/0 is retracted to signal that the
%= probabilities of the examples have to be recalculated
%========================================================================
save_old_probabilities :-
( % go over all tunable facts
tunable_fact(FactID,_),
(
continuous_fact(FactID)
->
(
get_continuous_fact_parameters(FactID,gaussian(OldMu,OldSigma)),
atomic_concat(['old_mu_',FactID],Key),
atomic_concat(['old_sigma_',FactID],Key2),
bb_put(Key,OldMu),
bb_put(Key2,OldSigma)
);
(
get_fact_probability(FactID,OldProbability),
atomic_concat(['old_prob_',FactID],Key),
bb_put(Key,OldProbability)
)
),
fail; % go to next tunable fact
true
).
forget_old_probabilities :-
( % go over all tunable facts
tunable_fact(FactID,_),
(
continuous_fact(FactID)
->
(
atomic_concat(['old_mu_',FactID],Key),
atomic_concat(['old_sigma_',FactID],Key2),
atomic_concat(['grad_mu_',FactID],Key3),
atomic_concat(['grad_sigma_',FactID],Key4),
bb_delete(Key,_),
bb_delete(Key2,_),
bb_delete(Key3,_),
bb_delete(Key4,_)
);
(
atomic_concat(['old_prob_',FactID],Key),
atomic_concat(['grad_',FactID],Key2),
bb_delete(Key,_),
bb_delete(Key2,_)
)
),
fail; % go to next tunable fact
true
).
add_gradient(Learning_Rate) :-
( % go over all tunable facts
tunable_fact(FactID,_),
(
continuous_fact(FactID)
->
(
atomic_concat(['old_mu_',FactID],Key),
atomic_concat(['old_sigma_',FactID],Key2),
atomic_concat(['grad_mu_',FactID],Key3),
atomic_concat(['grad_sigma_',FactID],Key4),
bb_get(Key,Old_Mu),
bb_get(Key2,Old_Sigma),
bb_get(Key3,Grad_Mu),
bb_get(Key4,Grad_Sigma),
Mu is Old_Mu -Learning_Rate* Grad_Mu,
Sigma is exp(log(Old_Sigma) -Learning_Rate* Grad_Sigma),
set_continuous_fact_parameters(FactID,gaussian(Mu,Sigma))
);
(
atomic_concat(['old_prob_',FactID],Key),
atomic_concat(['grad_',FactID],Key2),
bb_get(Key,OldProbability),
bb_get(Key2,GradValue),
inv_sigmoid(OldProbability,OldValue),
NewValue is OldValue -Learning_Rate*GradValue,
sigmoid(NewValue,NewProbability),
% Prevent "inf" by using values too close to 1.0
Prob_Secure is min(0.999999999,max(0.000000001,NewProbability)),
set_fact_probability(FactID,Prob_Secure)
)
),
fail; % go to next tunable fact
true
),
retractall(values_correct).
gradient_descent :-
my_format(2,'Gradient ',[]),
save_old_probabilities,
update_values,
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
% start set gradient to zero
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
( % go over all tunable facts
tunable_fact(FactID,_),
(
continuous_fact(FactID)
->
(
atomic_concat(['grad_mu_',FactID],Key),
atomic_concat(['grad_sigma_',FactID],Key2),
bb_put(Key,0.0),
bb_put(Key2,0.0)
);
(
atomic_concat(['grad_',FactID],Key),
bb_put(Key,0.0)
)
),
fail; % go to next tunable fact
true
),
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
% stop gradient to zero
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
!,
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
% start calculate gradient
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
bb_put(mse_train_sum, 0.0),
bb_put(mse_train_min, 0.0),
bb_put(mse_train_max, 0.0),
problog_flag(alpha,Alpha),
logger_set_variable(alpha,Alpha),
example_count(Example_Count),
( % go over all training examples
current_predicate(user:example/4),
user:example(QueryID,_Query,QueryProb,Type),
once(update_query(QueryID,'.',all)),
query_probability(QueryID,BDDProb),
(
QueryProb=:=0.0
->
Y2=Alpha;
Y2=1.0
),
(
(Type == '='; (Type == '<', BDDProb>QueryProb); (Type=='>',BDDProb<QueryProb))
->
Y is Y2*2/Example_Count * (BDDProb-QueryProb);
Y=0.0
),
% first do the calculations for the MSE on training set
(
(Type == '='; (Type == '<', BDDProb>QueryProb); (Type=='>',BDDProb<QueryProb))
->
Squared_Error is (BDDProb-QueryProb)**2;
Squared_Error=0.0
),
bb_get(mse_train_sum,Old_MSE_Train_Sum),
bb_get(mse_train_min,Old_MSE_Train_Min),
bb_get(mse_train_max,Old_MSE_Train_Max),
New_MSE_Train_Sum is Old_MSE_Train_Sum+Squared_Error,
New_MSE_Train_Min is min(Old_MSE_Train_Min,Squared_Error),
New_MSE_Train_Max is max(Old_MSE_Train_Max,Squared_Error),
bb_put(mse_train_sum,New_MSE_Train_Sum),
bb_put(mse_train_min,New_MSE_Train_Min),
bb_put(mse_train_max,New_MSE_Train_Max),
( % go over all tunable facts
tunable_fact(FactID,_),
(
continuous_fact(FactID)
->
(
atomic_concat(['grad_mu_',FactID],Key),
atomic_concat(['grad_sigma_',FactID],Key2),
% if the following query fails,
% it means, the fact is not used in the proof
% of QueryID, and the gradient is 0.0 and will
% not contribute to NewValue either way
% DON'T FORGET THIS IF YOU CHANGE SOMETHING HERE!
query_gradient(QueryID,FactID,mu,GradValueMu),
query_gradient(QueryID,FactID,sigma,GradValueSigma),
bb_get(Key,OldValueMu),
bb_get(Key2,OldValueSigma),
NewValueMu is OldValueMu + Y*GradValueMu,
NewValueSigma is OldValueSigma + Y*GradValueSigma,
bb_put(Key,NewValueMu),
bb_put(Key2,NewValueSigma)
);
(
atomic_concat(['grad_',FactID],Key),
% if the following query fails,
% it means, the fact is not used in the proof
% of QueryID, and the gradient is 0.0 and will
% not contribute to NewValue either way
% DON'T FORGET THIS IF YOU CHANGE SOMETHING HERE!
query_gradient(QueryID,FactID,p,GradValue),
bb_get(Key,OldValue),
NewValue is OldValue + Y*GradValue,
bb_put(Key,NewValue)
)
),
fail; % go to next fact
true
),
once(update_query_cleanup(QueryID)),
fail; % go to next training example
true
),
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
% stop calculate gradient
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
!,
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
% start statistics on gradient
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
findall(V, (
tunable_fact(FactID,_),
atomic_concat(['grad_',FactID],Key),
bb_get(Key,V)
),Gradient_Values),
(
Gradient_Values==[]
->
(
logger_set_variable(gradient_mean,0.0),
logger_set_variable(gradient_min,0.0),
logger_set_variable(gradient_max,0.0)
);
(
sum_list(Gradient_Values,GradSum),
max_list(Gradient_Values,GradMax),
min_list(Gradient_Values,GradMin),
length(Gradient_Values,GradLength),
GradMean is GradSum/GradLength,
logger_set_variable(gradient_mean,GradMean),
logger_set_variable(gradient_min,GradMin),
logger_set_variable(gradient_max,GradMax)
)
),
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
% stop statistics on gradient
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
bb_delete(mse_train_sum,MSE_Train_Sum),
bb_delete(mse_train_min,MSE_Train_Min),
bb_delete(mse_train_max,MSE_Train_Max),
MSE is MSE_Train_Sum/Example_Count,
logger_set_variable(mse_trainingset,MSE),
logger_set_variable(mse_min_trainingset,MSE_Train_Min),
logger_set_variable(mse_max_trainingset,MSE_Train_Max),
my_format(2,'~n',[]),
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
% start add gradient to current probabilities
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
(
problog_flag(line_search,false)
->
problog_flag(learning_rate,LearningRate);
lineSearch(LearningRate,_)
),
my_format(3,'learning rate:~8f~n',[LearningRate]),
add_gradient(LearningRate),
logger_set_variable(learning_rate,LearningRate),
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
% stop add gradient to current probabilities
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
!,
forget_old_probabilities.
%========================================================================
%=
%=
%========================================================================
line_search_evaluate_point(Learning_Rate,MSE) :-
add_gradient(Learning_Rate),
my_format(2,'Line search (h=~8f) ',[Learning_Rate]),
mse_trainingset_only_for_linesearch(MSE).
lineSearch(Final_X,Final_Value) :-
% Get Parameters for line search
problog_flag(line_search_tolerance,Tol),
problog_flag(line_search_tau,Tau),
problog_flag(line_search_interval,(A,B)),
my_format(3,'Line search in interval (~4f,~4f)~n',[A,B]),
% init values
Acc is Tol * (B-A),
InitRight is A + Tau*(B-A),
InitLeft is A + B - InitRight,
line_search_evaluate_point(A,Value_A),
line_search_evaluate_point(B,Value_B),
line_search_evaluate_point(InitRight,Value_InitRight),
line_search_evaluate_point(InitLeft,Value_InitLeft),
bb_put(line_search_a,A),
bb_put(line_search_b,B),
bb_put(line_search_left,InitLeft),
bb_put(line_search_right,InitRight),
bb_put(line_search_value_a,Value_A),
bb_put(line_search_value_b,Value_B),
bb_put(line_search_value_left,Value_InitLeft),
bb_put(line_search_value_right,Value_InitRight),
bb_put(line_search_iteration,1),
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
%%%% BEGIN BACK TRACKING
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
(
repeat,
bb_get(line_search_iteration,Iteration),
bb_get(line_search_a,Ak),
bb_get(line_search_b,Bk),
bb_get(line_search_left,Left),
bb_get(line_search_right,Right),
bb_get(line_search_value_a,Fl),
bb_get(line_search_value_b,Fr),
bb_get(line_search_value_left,FLeft),
bb_get(line_search_value_right,FRight),
(
% check for infinity, if there is, go to the left
( FLeft >= FRight, \+ FLeft = (+inf), \+ FRight = (+inf) )
->
(
AkNew=Left,
FlNew=FLeft,
LeftNew=Right,
FLeftNew=FRight,
RightNew is AkNew + Bk - LeftNew,
line_search_evaluate_point(RightNew,FRightNew),
BkNew=Bk,
FrNew=Fr
);
(
BkNew=Right,
FrNew=FRight,
RightNew=Left,
FRightNew=FLeft,
LeftNew is Ak + BkNew - RightNew,
line_search_evaluate_point(LeftNew,FLeftNew),
AkNew=Ak,
FlNew=Fl
)
),
Next_Iteration is Iteration + 1,
bb_put(line_search_iteration,Next_Iteration),
bb_put(line_search_a,AkNew),
bb_put(line_search_b,BkNew),
bb_put(line_search_left,LeftNew),
bb_put(line_search_right,RightNew),
bb_put(line_search_value_a,FlNew),
bb_put(line_search_value_b,FrNew),
bb_put(line_search_value_left,FLeftNew),
bb_put(line_search_value_right,FRightNew),
% is the search interval smaller than the tolerance level?
BkNew-AkNew<Acc,
% apperantly it is, so get me out of here and
% cut away the choice point from repeat
!
),
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
%%%% END BACK TRACKING
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
% clean up the blackboard mess
bb_delete(line_search_iteration,_),
bb_delete(line_search_a,_),
bb_delete(line_search_b,_),
bb_delete(line_search_left,_),
bb_delete(line_search_right,_),
bb_delete(line_search_value_a,_),
bb_delete(line_search_value_b,_),
bb_delete(line_search_value_left,_),
bb_delete(line_search_value_right,_),
% it doesn't harm to check also the value in the middle
% of the current search interval
Middle is (AkNew + BkNew) / 2.0,
line_search_evaluate_point(Middle,Value_Middle),
% return the optimal value
my_5_min(Value_Middle,FlNew,FrNew,FLeftNew,FRightNew,
Middle,AkNew,BkNew,LeftNew,RightNew,
Optimal_Value,Optimal_X),
line_search_postcheck(Optimal_Value,Optimal_X,Final_Value,Final_X).
line_search_postcheck(V,X,V,X) :-
X>0,
!.
line_search_postcheck(V,X,V,X) :-
problog_flag(line_search_never_stop,false),
!.
line_search_postcheck(_,_, LLH, FinalPosition) :-
problog_flag(line_search_tolerance,Tolerance),
problog_flag(line_search_interval,(Left,Right)),
Offset is (Right - Left) * Tolerance,
bb_put(line_search_offset,Offset),
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
(
repeat,
bb_get(line_search_offset,OldOffset),
NewOffset is OldOffset * Tolerance,
bb_put(line_search_offset,NewOffset),
Position is Left + NewOffset,
line_search_evaluate_point(Position,LLH),
bb_put(line_search_llh,LLH),
write(logAtom(lineSearchPostCheck(Position,LLH))),nl,
\+ LLH = (+inf),
!
), % cut away choice point from repeat
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
bb_delete(line_search_llh,LLH),
bb_delete(line_search_offset,FinalOffset),
FinalPosition is Left + FinalOffset.
my_5_min(V1,V2,V3,V4,V5,F1,F2,F3,F4,F5,VMin,FMin) :-
(
V1<V2
->
(VTemp1=V1,FTemp1=F1);
(VTemp1=V2,FTemp1=F2)
),
(
V3<V4
->
(VTemp2=V3,FTemp2=F3);
(VTemp2=V4,FTemp2=F4)
),
(
VTemp1<VTemp2
->
(VTemp3=VTemp1,FTemp3=FTemp1);
(VTemp3=VTemp2,FTemp3=FTemp2)
),
(
VTemp3<V5
->
(VMin=VTemp3,FMin=FTemp3);
(VMin=V5,FMin=F5)
).
%========================================================================
%= set the alpha parameter to the value
%= # positive training examples / # negative training examples
%=
%= training example is positive if P(e)=1
%= training example is negative if P(e)=0
%=
%= if there are training example with 0<P<1, set alpha=1.0
%========================================================================
auto_alpha :-
\+ current_predicate(user:example/4),
!,
set_problog_flag(alpha,1.0).
auto_alpha :-
user:example(_,_,P,_),
P<1,
P>0,
!,
set_problog_flag(alpha,1.0).
auto_alpha :-
findall(1,(user:example(_,_,P,=),P=:=1.0),Pos),
findall(0,(user:example(_,_,P,=),P=:=0.0),Neg),
length(Pos,NP),
length(Neg,NN),
Alpha is NP/NN,
set_problog_flag(alpha,Alpha).
%========================================================================
%= initialize the logger module and set the flags for learning
%= don't change anything here! use set_learning_flag/2 instead
%========================================================================
init_flags :-
prolog_file_name('queries',Queries_Folder), % get absolute file name for './queries'
prolog_file_name('output',Output_Folder), % get absolute file name for './output'
problog_define_flag(bdd_directory, problog_flag_validate_directory, 'directory for BDD scripts', Queries_Folder,learning_general),
problog_define_flag(output_directory, problog_flag_validate_directory, 'directory for logfiles etc', Output_Folder,learning_general,flags:learning_output_dir_handler),
problog_define_flag(log_frequency, problog_flag_validate_posint, 'log results every nth iteration', 1, learning_general),
problog_define_flag(rebuild_bdds, problog_flag_validate_nonegint, 'rebuild BDDs every nth iteration', 0, learning_general),
problog_define_flag(learning_verbosity_level, problog_flag_validate_0to5,'How much output shall be given (0=nothing,5=all)',5, learning_general),
problog_define_flag(reuse_initialized_bdds,problog_flag_validate_boolean, 'Reuse BDDs from previous runs',false, learning_general),
problog_define_flag(check_duplicate_bdds,problog_flag_validate_boolean,'Store intermediate results in hash table',true,learning_general),
problog_define_flag(init_method,problog_flag_validate_dummy,'ProbLog predicate to search proofs',(Query,Probability,BDDFile,ProbFile,problog_kbest_save(Query,100,Probability,_Status,BDDFile,ProbFile)),learning_general,flags:learning_init_handler),
problog_define_flag(probability_initializer,problog_flag_validate_dummy,'Predicate to initialize probabilities',(FactID,P,random_probability(FactID,P)),learning_general,flags:learning_prob_init_handler),
problog_define_flag(alpha,problog_flag_validate_number,'weight of negative examples (auto=n_p/n_n)',auto,learning_general,flags:auto_handler),
problog_define_flag(sigmoid_slope,problog_flag_validate_posnumber,'slope of sigmoid function',1.0,learning_general),
problog_define_flag(learning_rate,problog_flag_validate_posnumber,'Default learning rate (If line_search=false)',examples,learning_line_search,flags:examples_handler),
problog_define_flag(line_search, problog_flag_validate_boolean,'estimate learning rate by line search',false,learning_line_search),
problog_define_flag(line_search_never_stop, problog_flag_validate_boolean,'make tiny step if line search returns 0',true,learning_line_search),
problog_define_flag(line_search_tau, problog_flag_validate_indomain_0_1_open,'tau value for line search',0.618033988749,learning_line_search),
problog_define_flag(line_search_tolerance,problog_flag_validate_posnumber,'tolerance value for line search',0.05,learning_line_search),
problog_define_flag(line_search_interval, problog_flag_validate_dummy,'interval for line search',(0,100),learning_line_search,flags:linesearch_interval_handler).
init_logger :-
logger_define_variable(iteration, int),
logger_define_variable(duration,time),
logger_define_variable(mse_trainingset,float),
logger_define_variable(mse_min_trainingset,float),
logger_define_variable(mse_max_trainingset,float),
logger_define_variable(mse_testset,float),
logger_define_variable(mse_min_testset,float),
logger_define_variable(mse_max_testset,float),
logger_define_variable(gradient_mean,float),
logger_define_variable(gradient_min,float),
logger_define_variable(gradient_max,float),
logger_define_variable(ground_truth_diff,float),
logger_define_variable(ground_truth_mindiff,float),
logger_define_variable(ground_truth_maxdiff,float),
logger_define_variable(learning_rate,float),
logger_define_variable(alpha,float).
%========================================================================
%=
%=
%========================================================================
:- initialization((init_flags,init_logger)).