This repository has been archived on 2023-08-20. You can view files and clone it, but cannot push or open issues or pull requests.
yap-6.3/pl/spy.yap
2015-10-05 10:38:20 +01:00

396 lines
9.4 KiB
Prolog

:- system_module( '$_debug', [debug/0,
debugging/0,
leash/1,
nodebug/0,
(nospy)/1,
nospyall/0,
notrace/0,
(spy)/1,
trace/0], [
'$init_debugger'/0]).
:- use_system_module( '$_boot', ['$find_goal_definition'/4,
'$system_catch'/4]).
:- use_system_module( '$_errors', ['$Error'/1,
'$do_error'/2]).
:- use_system_module( '$_init', ['$system_module'/1]).
:- use_system_module( '$_modules', ['$meta_expansion'/6]).
:- use_system_module( '$_preds', ['$clause'/4]).
/*-----------------------------------------------------------------------------
Debugging / creating spy points
-----------------------------------------------------------------------------*/
/** @defgroup Deb_Preds Debugging Predicates
@ingroup builtins
@{
The
following predicates are available to control the debugging of
programs:
+ debug
Switches the debugger on.
+ debuggi=
r
g
Outputs status information about the debugger which includes the leash
mode and the existing spy-points, when the debugger is on.
+ nodebug
Switches the debugger off.
*/
:- op(900,fx,[spy,nospy]).
'$init_debugger' :-
'__NB_getval__'('$trace', _, fail), !.
'$init_debugger' :-
'$debugger_input',
'__NB_setval__'('$trace',off),
'__NB_setval__'('$if_skip_mode',no_skip),
'__NB_setval__'('$spy_glist',[]),
'__NB_setval__'('$spy_gn',1),
'__NB_setval__'('$debug_run',off),
'__NB_setval__'('$debug_jump',false).
% First part : setting and reseting spy points
% $suspy does most of the work
'$suspy'(V,S,M) :- var(V) , !,
'$do_error'(instantiation_error,M:spy(V,S)).
'$suspy'((M:S),P,_) :- !,
'$suspy'(S,P,M).
'$suspy'([],_,_) :- !.
'$suspy'([F|L],S,M) :- !, ( '$suspy'(F,S,M) ; '$suspy'(L,S,M) ).
'$suspy'(F/N,S,M) :- !,
functor(T,F,N),
'$do_suspy'(S, F, N, T, M).
'$suspy'(A,S,M) :- atom(A), !,
'$suspy_predicates_by_name'(A,S,M).
'$suspy'(P,spy,M) :- !,
'$do_error'(domain_error(predicate_spec,P),spy(M:P)).
'$suspy'(P,nospy,M) :-
'$do_error'(domain_error(predicate_spec,P),nospy(M:P)).
'$suspy_predicates_by_name'(A,S,M) :-
% just check one such predicate exists
(
current_predicate(A,M:_)
->
M = EM,
A = NA
;
recorded('$import','$import'(EM,M,GA,_,A,_),_),
functor(GA,NA,_)
),
!,
'$do_suspy_predicates_by_name'(NA,S,EM).
'$suspy_predicates_by_name'(A,spy,M) :- !,
print_message(warning,no_match(spy(M:A))).
'$suspy_predicates_by_name'(A,nospy,M) :-
print_message(warning,no_match(nospy(M:A))).
'$do_suspy_predicates_by_name'(A,S,M) :-
current_predicate(A,M:T),
functor(T,A,N),
'$do_suspy'(S, A, N, T, M).
'$do_suspy_predicates_by_name'(A, S, M) :-
recorded('$import','$import'(EM,M,_,T,A,N),_),
'$do_suspy'(S, A, N, T, EM).
%
% protect against evil arguments.
%
'$do_suspy'(S, F, N, T, M) :-
recorded('$import','$import'(EM,M,T0,_,F,N),_), !,
functor(T0, F0, N0),
'$do_suspy'(S, F0, N0, T, EM).
'$do_suspy'(S, F, N, T, M) :-
'$undefined'(T,M), !,
( S = spy ->
print_message(warning,no_match(spy(M:F/N)))
;
print_message(warning,no_match(nospy(M:F/N)))
).
'$do_suspy'(S, F, N, T, M) :-
'$system_predicate'(T,M),
'$predicate_flags'(T,M,F,F),
F /\ 0x118dd080 =\= 0,
( S = spy ->
'$do_error'(permission_error(access,private_procedure,T),spy(M:F/N))
;
'$do_error'(permission_error(access,private_procedure,T),nospy(M:F/N))
).
'$do_suspy'(S, F, N, T, M) :-
'$undefined'(T,M), !,
( S = spy ->
print_message(warning,no_match(spy(M:F/N)))
;
print_message(warning,no_match(nospy(M:F/N)))
).
'$do_suspy'(S,F,N,T,M) :-
'$suspy2'(S,F,N,T,M).
'$suspy2'(spy,F,N,T,M) :-
recorded('$spy','$spy'(T,M),_), !,
print_message(informational,breakp(bp(debugger,plain,M:T,M:F/N,N),add,already)).
'$suspy2'(spy,F,N,T,M) :- !,
recorda('$spy','$spy'(T,M),_),
'$set_spy'(T,M),
print_message(informational,breakp(bp(debugger,plain,M:T,M:F/N,N),add,ok)).
'$suspy2'(nospy,F,N,T,M) :-
recorded('$spy','$spy'(T,M),R), !,
erase(R),
'$rm_spy'(T,M),
print_message(informational,breakp(bp(debugger,plain,M:T,M:F/N,N),remove,last)).
'$suspy2'(nospy,F,N,_,M) :-
print_message(informational,breakp(no,breakpoint_for,M:F/N)).
'$pred_being_spied'(G, M) :-
recorded('$spy','$spy'(G,M),_), !.
/**
@pred spy( + _P_ ).
Sets spy-points on all the predicates represented by
_P_. _P_ can either be a single specification or a list of
specifications. Each one must be of the form _Name/Arity_
or _Name_. In the last case all predicates with the name
_Name_ will be spied. As in C-Prolog, system predicates and
predicates written in C, cannot be spied.
*/
spy Spec :-
'$init_debugger',
prolog:debug_action_hook(spy(Spec)), !.
spy L :-
'$current_module'(M),
'$suspy'(L, spy, M), fail.
spy _ :- debug.
/** @pred nospy( + _P_ )
Removes spy-points from all predicates specified by _P_.
The possible forms for _P_ are the same as in `spy P`.
*/
nospy Spec :-
'$init_debugger',
prolog:debug_action_hook(nospy(Spec)), !.
nospy L :-
'$current_module'(M),
'$suspy'(L, nospy, M), fail.
nospy _.
/** @pred nospyall
Removes all existing spy-points.
*/
nospyall :-
'$init_debugger',
prolog:debug_action_hook(nospyall), !.
nospyall :-
recorded('$spy','$spy'(T,M),_), functor(T,F,N), '$suspy'(F/N,nospy,M), fail.
nospyall.
% debug mode -> debug flag = 1
debug :-
'$init_debugger',
( '__NB_getval__'('$spy_gn',_, fail) -> true ; '__NB_setval__'('$spy_gn',1) ),
'$start_debugging'(on),
print_message(informational,debug(debug)).
'$start_debugging'(Mode) :-
(Mode == on ->
set_prolog_flag(debug, true)
;
set_prolog_flag(debug, false)
),
'__NB_setval__'('$debug_run',off),
'__NB_setval__'('$debug_jump',false).
nodebug :-
'$init_debugger',
set_prolog_flag(debug, false),
'__NB_setval__'('$trace',off),
print_message(informational,debug(off)).
%
% remove any debugging info after an abort.
%
/** @pred trace
Switches on the debugger and enters tracing mode.
*/
trace :-
'$init_debugger',
'__NB_getval__'('$trace', on, fail), !.
trace :-
'__NB_setval__'('$trace',on),
'$start_debugging'(on),
print_message(informational,debug(trace)),
'$creep'.
/** @pred notrace
Ends tracing and exits the debugger. This is the same as
nodebug/0.
*/
notrace :-
'$init_debugger',
nodebug.
/*-----------------------------------------------------------------------------
leash
-----------------------------------------------------------------------------*/
/** @pred leash(+ _M_)
Sets leashing mode to _M_.
The mode can be specified as:
+ `full`
prompt on Call, Exit, Redo and Fail
+ `tight`
prompt on Call, Redo and Fail
+ `half`
prompt on Call and Redo
+ `loose`
prompt on Call
+ `off`
never prompt
+ `none`
never prompt, same as `off`
The initial leashing mode is `full`.
The user may also specify directly the debugger ports
where he wants to be prompted. If the argument for leash
is a number _N_, each of lower four bits of the number is used to
control prompting at one the ports of the box model. The debugger will
prompt according to the following conditions:
+ if `N/\ 1 =\= 0` prompt on fail
+ if `N/\ 2 =\= 0` prompt on redo
+ if `N/\ 4 =\= 0` prompt on exit
+ if `N/\ 8 =\= 0` prompt on call
Therefore, `leash(15)` is equivalent to `leash(full)` and
`leash(0)` is equivalent to `leash(off)`.
Another way of using `leash` is to give it a list with the names of
the ports where the debugger should stop. For example,
`leash([call,exit,redo,fail])` is the same as `leash(full)` or
`leash(15)` and `leash([fail])` might be used instead of
`leash(1)`.
@}
*/
leash(X) :- var(X),
'$do_error'(instantiation_error,leash(X)).
leash(X) :-
'$init_debugger',
'$leashcode'(X,Code),
set_value('$leash',Code),
'$show_leash'(informational,Code), !.
leash(X) :-
'$do_error'(type_error(leash_mode,X),leash(X)).
'$show_leash'(Msg,0) :-
print_message(Msg,leash([])).
'$show_leash'(Msg,Code) :-
'$check_leash_bit'(Code,0x8,L3,call,LF),
'$check_leash_bit'(Code,0x4,L2,exit,L3),
'$check_leash_bit'(Code,0x2,L1,redo,L2),
'$check_leash_bit'(Code,0x1,[],fail,L1),
print_message(Msg,leash(LF)).
'$check_leash_bit'(Code,Bit,L0,_,L0) :- Bit /\ Code =:= 0, !.
'$check_leash_bit'(_,_,L0,Name,[Name|L0]).
'$leashcode'(full,0xf) :- !.
'$leashcode'(on,0xf) :- !.
'$leashcode'(half,0xb) :- !.
'$leashcode'(loose,0x8) :- !.
'$leashcode'(off,0x0) :- !.
'$leashcode'(none,0x0) :- !.
%'$leashcode'([L|M],Code) :- !, '$leashcode_list'([L|M],Code).
'$leashcode'([L|M],Code) :- !,
'$list2Code'([L|M],Code).
'$leashcode'(N,N) :- integer(N), N >= 0, N =< 0xf.
'$list2Code'(V,_) :- var(V), !,
'$do_error'(instantiation_error,leash(V)).
'$list2Code'([],0) :- !.
'$list2Code'([V|L],_) :- var(V), !,
'$do_error'(instantiation_error,leash([V|L])).
'$list2Code'([call|L],N) :- '$list2Code'(L,N1), N is 0x8 + N1.
'$list2Code'([exit|L],N) :- '$list2Code'(L,N1), N is 0x4 + N1.
'$list2Code'([redo|L],N) :- '$list2Code'(L,N1), N is 0x2 + N1.
'$list2Code'([fail|L],N) :- '$list2Code'(L,N1), N is 0x1 + N1.
/*-----------------------------------------------------------------------------
debugging
-----------------------------------------------------------------------------*/
debugging :-
'$init_debugger',
prolog:debug_action_hook(nospyall), !.
debugging :-
( current_prolog_flag(debug, true) ->
print_message(help,debug(debug))
;
print_message(help,debug(off))
),
findall(M:(N/A),(recorded('$spy','$spy'(T,M),_),functor(T,N,A)),L),
print_message(help,breakpoints(L)),
get_value('$leash',Leash),
'$show_leash'(help,Leash).
/*
@}
*/