Cleanup built files from initial commit

Add myself to AUTHORS.
There might still be generated files in the doc dir but I don't
know enough about that setup yet to start deleting files.
This commit is contained in:
Matthew Brush 2013-03-04 01:46:56 -08:00
parent f660e3460a
commit bd619f4226
17 changed files with 3 additions and 11280 deletions

View File

@ -1 +1,3 @@
libcds was written by Don Owens <don@owensnet.com> Don Owens <don@owensnet.com> (original author)
Matthew Brush <mbrush@codebrainz.ca>

229
INSTALL
View File

@ -1,229 +0,0 @@
Copyright (C) 1994, 1995, 1996, 1999, 2000, 2001, 2002 Free Software
Foundation, Inc.
This file is free documentation; the Free Software Foundation gives
unlimited permission to copy, distribute and modify it.
Basic Installation
==================
These are generic installation instructions.
The `configure' shell script attempts to guess correct values for
various system-dependent variables used during compilation. It uses
those values to create a `Makefile' in each directory of the package.
It may also create one or more `.h' files containing system-dependent
definitions. Finally, it creates a shell script `config.status' that
you can run in the future to recreate the current configuration, and a
file `config.log' containing compiler output (useful mainly for
debugging `configure').
It can also use an optional file (typically called `config.cache'
and enabled with `--cache-file=config.cache' or simply `-C') that saves
the results of its tests to speed up reconfiguring. (Caching is
disabled by default to prevent problems with accidental use of stale
cache files.)
If you need to do unusual things to compile the package, please try
to figure out how `configure' could check whether to do them, and mail
diffs or instructions to the address given in the `README' so they can
be considered for the next release. If you are using the cache, and at
some point `config.cache' contains results you don't want to keep, you
may remove or edit it.
The file `configure.ac' (or `configure.in') is used to create
`configure' by a program called `autoconf'. You only need
`configure.ac' if you want to change it or regenerate `configure' using
a newer version of `autoconf'.
The simplest way to compile this package is:
1. `cd' to the directory containing the package's source code and type
`./configure' to configure the package for your system. If you're
using `csh' on an old version of System V, you might need to type
`sh ./configure' instead to prevent `csh' from trying to execute
`configure' itself.
Running `configure' takes awhile. While running, it prints some
messages telling which features it is checking for.
2. Type `make' to compile the package.
3. Optionally, type `make check' to run any self-tests that come with
the package.
4. Type `make install' to install the programs and any data files and
documentation.
5. You can remove the program binaries and object files from the
source code directory by typing `make clean'. To also remove the
files that `configure' created (so you can compile the package for
a different kind of computer), type `make distclean'. There is
also a `make maintainer-clean' target, but that is intended mainly
for the package's developers. If you use it, you may have to get
all sorts of other programs in order to regenerate files that came
with the distribution.
Compilers and Options
=====================
Some systems require unusual options for compilation or linking that
the `configure' script does not know about. Run `./configure --help'
for details on some of the pertinent environment variables.
You can give `configure' initial values for configuration parameters
by setting variables in the command line or in the environment. Here
is an example:
./configure CC=c89 CFLAGS=-O2 LIBS=-lposix
*Note Defining Variables::, for more details.
Compiling For Multiple Architectures
====================================
You can compile the package for more than one kind of computer at the
same time, by placing the object files for each architecture in their
own directory. To do this, you must use a version of `make' that
supports the `VPATH' variable, such as GNU `make'. `cd' to the
directory where you want the object files and executables to go and run
the `configure' script. `configure' automatically checks for the
source code in the directory that `configure' is in and in `..'.
If you have to use a `make' that does not support the `VPATH'
variable, you have to compile the package for one architecture at a
time in the source code directory. After you have installed the
package for one architecture, use `make distclean' before reconfiguring
for another architecture.
Installation Names
==================
By default, `make install' will install the package's files in
`/usr/local/bin', `/usr/local/man', etc. You can specify an
installation prefix other than `/usr/local' by giving `configure' the
option `--prefix=PATH'.
You can specify separate installation prefixes for
architecture-specific files and architecture-independent files. If you
give `configure' the option `--exec-prefix=PATH', the package will use
PATH as the prefix for installing programs and libraries.
Documentation and other data files will still use the regular prefix.
In addition, if you use an unusual directory layout you can give
options like `--bindir=PATH' to specify different values for particular
kinds of files. Run `configure --help' for a list of the directories
you can set and what kinds of files go in them.
If the package supports it, you can cause programs to be installed
with an extra prefix or suffix on their names by giving `configure' the
option `--program-prefix=PREFIX' or `--program-suffix=SUFFIX'.
Optional Features
=================
Some packages pay attention to `--enable-FEATURE' options to
`configure', where FEATURE indicates an optional part of the package.
They may also pay attention to `--with-PACKAGE' options, where PACKAGE
is something like `gnu-as' or `x' (for the X Window System). The
`README' should mention any `--enable-' and `--with-' options that the
package recognizes.
For packages that use the X Window System, `configure' can usually
find the X include and library files automatically, but if it doesn't,
you can use the `configure' options `--x-includes=DIR' and
`--x-libraries=DIR' to specify their locations.
Specifying the System Type
==========================
There may be some features `configure' cannot figure out
automatically, but needs to determine by the type of machine the package
will run on. Usually, assuming the package is built to be run on the
_same_ architectures, `configure' can figure that out, but if it prints
a message saying it cannot guess the machine type, give it the
`--build=TYPE' option. TYPE can either be a short name for the system
type, such as `sun4', or a canonical name which has the form:
CPU-COMPANY-SYSTEM
where SYSTEM can have one of these forms:
OS KERNEL-OS
See the file `config.sub' for the possible values of each field. If
`config.sub' isn't included in this package, then this package doesn't
need to know the machine type.
If you are _building_ compiler tools for cross-compiling, you should
use the `--target=TYPE' option to select the type of system they will
produce code for.
If you want to _use_ a cross compiler, that generates code for a
platform different from the build platform, you should specify the
"host" platform (i.e., that on which the generated programs will
eventually be run) with `--host=TYPE'.
Sharing Defaults
================
If you want to set default values for `configure' scripts to share,
you can create a site shell script called `config.site' that gives
default values for variables like `CC', `cache_file', and `prefix'.
`configure' looks for `PREFIX/share/config.site' if it exists, then
`PREFIX/etc/config.site' if it exists. Or, you can set the
`CONFIG_SITE' environment variable to the location of the site script.
A warning: not all `configure' scripts look for a site script.
Defining Variables
==================
Variables not defined in a site shell script can be set in the
environment passed to `configure'. However, some packages may run
configure again during the build, and the customized values of these
variables may be lost. In order to avoid this problem, you should set
them in the `configure' command line, using `VAR=value'. For example:
./configure CC=/usr/local2/bin/gcc
will cause the specified gcc to be used as the C compiler (unless it is
overridden in the site shell script).
`configure' Invocation
======================
`configure' recognizes the following options to control how it
operates.
`--help'
`-h'
Print a summary of the options to `configure', and exit.
`--version'
`-V'
Print the version of Autoconf used to generate the `configure'
script, and exit.
`--cache-file=FILE'
Enable the cache: use and save the results of the tests in FILE,
traditionally `config.cache'. FILE defaults to `/dev/null' to
disable caching.
`--config-cache'
`-C'
Alias for `--cache-file=config.cache'.
`--quiet'
`--silent'
`-q'
Do not print messages saying which checks are being made. To
suppress all normal output, redirect it to `/dev/null' (any error
messages will still be shown).
`--srcdir=DIR'
Look for the package's source code in directory DIR. Usually
`configure' can determine that directory automatically.
`configure' also accepts some other, not widely useful, options. Run
`configure --help' for more details.

View File

@ -1,554 +0,0 @@
# Makefile.in generated by automake 1.9.2 from Makefile.am.
# @configure_input@
# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
# 2003, 2004 Free Software Foundation, Inc.
# This Makefile.in is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
# PARTICULAR PURPOSE.
@SET_MAKE@
srcdir = @srcdir@
top_srcdir = @top_srcdir@
VPATH = @srcdir@
pkgdatadir = $(datadir)/@PACKAGE@
pkglibdir = $(libdir)/@PACKAGE@
pkgincludedir = $(includedir)/@PACKAGE@
top_builddir = .
am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
INSTALL = @INSTALL@
install_sh_DATA = $(install_sh) -c -m 644
install_sh_PROGRAM = $(install_sh) -c
install_sh_SCRIPT = $(install_sh) -c
INSTALL_HEADER = $(INSTALL_DATA)
transform = $(program_transform_name)
NORMAL_INSTALL = :
PRE_INSTALL = :
POST_INSTALL = :
NORMAL_UNINSTALL = :
PRE_UNINSTALL = :
POST_UNINSTALL = :
subdir = .
DIST_COMMON = README $(am__configure_deps) $(srcdir)/Makefile.am \
$(srcdir)/Makefile.in $(top_srcdir)/configure \
$(top_srcdir)/include/cfu.h.in \
$(top_srcdir)/include/cfutypes.h.in AUTHORS COPYING ChangeLog \
INSTALL NEWS depcomp install-sh missing mkinstalldirs
ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
am__aclocal_m4_deps = $(top_srcdir)/acinclude.m4 \
$(top_srcdir)/configure.ac
am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
$(ACLOCAL_M4)
am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \
configure.lineno configure.status.lineno
mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs
CONFIG_CLEAN_FILES = include/cfutypes.h include/cfu.h
SOURCES =
DIST_SOURCES =
RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \
html-recursive info-recursive install-data-recursive \
install-exec-recursive install-info-recursive \
install-recursive installcheck-recursive installdirs-recursive \
pdf-recursive ps-recursive uninstall-info-recursive \
uninstall-recursive
ETAGS = etags
CTAGS = ctags
DIST_SUBDIRS = $(SUBDIRS)
DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
distdir = $(PACKAGE)-$(VERSION)
top_distdir = $(distdir)
am__remove_distdir = \
{ test ! -d $(distdir) \
|| { find $(distdir) -type d ! -perm -200 -exec chmod u+w {} ';' \
&& rm -fr $(distdir); }; }
DIST_ARCHIVES = $(distdir).tar.gz $(distdir).tar.bz2
GZIP_ENV = --best
distuninstallcheck_listfiles = find . -type f -print
distcleancheck_listfiles = find . -type f -print
ACLOCAL = @ACLOCAL@
AMDEP_FALSE = @AMDEP_FALSE@
AMDEP_TRUE = @AMDEP_TRUE@
AMTAR = @AMTAR@
AUTOCONF = @AUTOCONF@
AUTOHEADER = @AUTOHEADER@
AUTOMAKE = @AUTOMAKE@
AWK = @AWK@
CC = @CC@
CCDEPMODE = @CCDEPMODE@
CFLAGS = @CFLAGS@
CPP = @CPP@
CPPFLAGS = @CPPFLAGS@
CYGPATH_W = @CYGPATH_W@
DEBUG_FALSE = @DEBUG_FALSE@
DEBUG_TRUE = @DEBUG_TRUE@
DEFS = @DEFS@
DEPDIR = @DEPDIR@
ECHO_C = @ECHO_C@
ECHO_N = @ECHO_N@
ECHO_T = @ECHO_T@
EGREP = @EGREP@
EXEEXT = @EXEEXT@
INSTALL_DATA = @INSTALL_DATA@
INSTALL_PROGRAM = @INSTALL_PROGRAM@
INSTALL_SCRIPT = @INSTALL_SCRIPT@
INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
LDFLAGS = @LDFLAGS@
LIBCFU_TYPE_u_int = @LIBCFU_TYPE_u_int@
LIBOBJS = @LIBOBJS@
LIBS = @LIBS@
LTLIBOBJS = @LTLIBOBJS@
MAKEINFO = @MAKEINFO@
OBJEXT = @OBJEXT@
PACKAGE = @PACKAGE@
PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
PACKAGE_NAME = @PACKAGE_NAME@
PACKAGE_STRING = @PACKAGE_STRING@
PACKAGE_TARNAME = @PACKAGE_TARNAME@
PACKAGE_VERSION = @PACKAGE_VERSION@
PATH_SEPARATOR = @PATH_SEPARATOR@
RANLIB = @RANLIB@
SET_MAKE = @SET_MAKE@
SHELL = @SHELL@
STRIP = @STRIP@
VERSION = @VERSION@
ac_ct_CC = @ac_ct_CC@
ac_ct_RANLIB = @ac_ct_RANLIB@
ac_ct_STRIP = @ac_ct_STRIP@
am__fastdepCC_FALSE = @am__fastdepCC_FALSE@
am__fastdepCC_TRUE = @am__fastdepCC_TRUE@
am__include = @am__include@
am__leading_dot = @am__leading_dot@
am__quote = @am__quote@
am__tar = @am__tar@
am__untar = @am__untar@
bindir = @bindir@
build_alias = @build_alias@
datadir = @datadir@
exec_prefix = @exec_prefix@
host_alias = @host_alias@
includedir = @includedir@
infodir = @infodir@
install_sh = @install_sh@
libdir = @libdir@
libexecdir = @libexecdir@
localstatedir = @localstatedir@
mandir = @mandir@
mkdir_p = @mkdir_p@
oldincludedir = @oldincludedir@
prefix = @prefix@
program_transform_name = @program_transform_name@
sbindir = @sbindir@
sharedstatedir = @sharedstatedir@
sysconfdir = @sysconfdir@
target_alias = @target_alias@
SUBDIRS = src examples doc
@DEBUG_FALSE@AM_CFLAGS = -Wall -W -Werror -DCFU_VERSION="\"@VERSION@\""
@DEBUG_TRUE@AM_CFLAGS = -Wall -W -Werror -DCFU_VERSION="\"@VERSION@\"" -DCFU_DEBUG=1
INCLUDES = -I$(top_srcdir)/include
EXTRA_DIST = include/cfutypes.h.in include/cfu.h.in
all: all-recursive
.SUFFIXES:
am--refresh:
@:
$(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(am__configure_deps)
@for dep in $?; do \
case '$(am__configure_deps)' in \
*$$dep*) \
echo ' cd $(srcdir) && $(AUTOMAKE) --gnu '; \
cd $(srcdir) && $(AUTOMAKE) --gnu \
&& exit 0; \
exit 1;; \
esac; \
done; \
echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu Makefile'; \
cd $(top_srcdir) && \
$(AUTOMAKE) --gnu Makefile
.PRECIOUS: Makefile
Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
@case '$?' in \
*config.status*) \
echo ' $(SHELL) ./config.status'; \
$(SHELL) ./config.status;; \
*) \
echo ' cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe)'; \
cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe);; \
esac;
$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
$(SHELL) ./config.status --recheck
$(top_srcdir)/configure: $(am__configure_deps)
cd $(srcdir) && $(AUTOCONF)
$(ACLOCAL_M4): $(am__aclocal_m4_deps)
cd $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS)
include/cfutypes.h: $(top_builddir)/config.status $(top_srcdir)/include/cfutypes.h.in
cd $(top_builddir) && $(SHELL) ./config.status $@
include/cfu.h: $(top_builddir)/config.status $(top_srcdir)/include/cfu.h.in
cd $(top_builddir) && $(SHELL) ./config.status $@
uninstall-info-am:
# This directory's subdirectories are mostly independent; you can cd
# into them and run `make' without going through this Makefile.
# To change the values of `make' variables: instead of editing Makefiles,
# (1) if the variable is set in `config.status', edit `config.status'
# (which will cause the Makefiles to be regenerated when you run `make');
# (2) otherwise, pass the desired values on the `make' command line.
$(RECURSIVE_TARGETS):
@set fnord $$MAKEFLAGS; amf=$$2; \
dot_seen=no; \
target=`echo $@ | sed s/-recursive//`; \
list='$(SUBDIRS)'; for subdir in $$list; do \
echo "Making $$target in $$subdir"; \
if test "$$subdir" = "."; then \
dot_seen=yes; \
local_target="$$target-am"; \
else \
local_target="$$target"; \
fi; \
(cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
|| case "$$amf" in *=*) exit 1;; *k*) fail=yes;; *) exit 1;; esac; \
done; \
if test "$$dot_seen" = "no"; then \
$(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
fi; test -z "$$fail"
mostlyclean-recursive clean-recursive distclean-recursive \
maintainer-clean-recursive:
@set fnord $$MAKEFLAGS; amf=$$2; \
dot_seen=no; \
case "$@" in \
distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
*) list='$(SUBDIRS)' ;; \
esac; \
rev=''; for subdir in $$list; do \
if test "$$subdir" = "."; then :; else \
rev="$$subdir $$rev"; \
fi; \
done; \
rev="$$rev ."; \
target=`echo $@ | sed s/-recursive//`; \
for subdir in $$rev; do \
echo "Making $$target in $$subdir"; \
if test "$$subdir" = "."; then \
local_target="$$target-am"; \
else \
local_target="$$target"; \
fi; \
(cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
|| case "$$amf" in *=*) exit 1;; *k*) fail=yes;; *) exit 1;; esac; \
done && test -z "$$fail"
tags-recursive:
list='$(SUBDIRS)'; for subdir in $$list; do \
test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \
done
ctags-recursive:
list='$(SUBDIRS)'; for subdir in $$list; do \
test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \
done
ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
unique=`for i in $$list; do \
if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
done | \
$(AWK) ' { files[$$0] = 1; } \
END { for (i in files) print i; }'`; \
mkid -fID $$unique
tags: TAGS
TAGS: tags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \
$(TAGS_FILES) $(LISP)
tags=; \
here=`pwd`; \
if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \
include_option=--etags-include; \
empty_fix=.; \
else \
include_option=--include; \
empty_fix=; \
fi; \
list='$(SUBDIRS)'; for subdir in $$list; do \
if test "$$subdir" = .; then :; else \
test ! -f $$subdir/TAGS || \
tags="$$tags $$include_option=$$here/$$subdir/TAGS"; \
fi; \
done; \
list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
unique=`for i in $$list; do \
if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
done | \
$(AWK) ' { files[$$0] = 1; } \
END { for (i in files) print i; }'`; \
if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \
test -n "$$unique" || unique=$$empty_fix; \
$(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
$$tags $$unique; \
fi
ctags: CTAGS
CTAGS: ctags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \
$(TAGS_FILES) $(LISP)
tags=; \
here=`pwd`; \
list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
unique=`for i in $$list; do \
if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
done | \
$(AWK) ' { files[$$0] = 1; } \
END { for (i in files) print i; }'`; \
test -z "$(CTAGS_ARGS)$$tags$$unique" \
|| $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
$$tags $$unique
GTAGS:
here=`$(am__cd) $(top_builddir) && pwd` \
&& cd $(top_srcdir) \
&& gtags -i $(GTAGS_ARGS) $$here
distclean-tags:
-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
distdir: $(DISTFILES)
$(am__remove_distdir)
mkdir $(distdir)
$(mkdir_p) $(distdir)/include
@srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \
topsrcdirstrip=`echo "$(top_srcdir)" | sed 's|.|.|g'`; \
list='$(DISTFILES)'; for file in $$list; do \
case $$file in \
$(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \
$(top_srcdir)/*) file=`echo "$$file" | sed "s|^$$topsrcdirstrip/|$(top_builddir)/|"`;; \
esac; \
if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \
if test "$$dir" != "$$file" && test "$$dir" != "."; then \
dir="/$$dir"; \
$(mkdir_p) "$(distdir)$$dir"; \
else \
dir=''; \
fi; \
if test -d $$d/$$file; then \
if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
fi; \
cp -pR $$d/$$file $(distdir)$$dir || exit 1; \
else \
test -f $(distdir)/$$file \
|| cp -p $$d/$$file $(distdir)/$$file \
|| exit 1; \
fi; \
done
list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
if test "$$subdir" = .; then :; else \
test -d "$(distdir)/$$subdir" \
|| $(mkdir_p) "$(distdir)/$$subdir" \
|| exit 1; \
distdir=`$(am__cd) $(distdir) && pwd`; \
top_distdir=`$(am__cd) $(top_distdir) && pwd`; \
(cd $$subdir && \
$(MAKE) $(AM_MAKEFLAGS) \
top_distdir="$$top_distdir" \
distdir="$$distdir/$$subdir" \
distdir) \
|| exit 1; \
fi; \
done
-find $(distdir) -type d ! -perm -777 -exec chmod a+rwx {} \; -o \
! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; -o \
! -type d ! -perm -400 -exec chmod a+r {} \; -o \
! -type d ! -perm -444 -exec $(SHELL) $(install_sh) -c -m a+r {} {} \; \
|| chmod -R a+r $(distdir)
dist-gzip: distdir
tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz
$(am__remove_distdir)
dist-bzip2: distdir
tardir=$(distdir) && $(am__tar) | bzip2 -9 -c >$(distdir).tar.bz2
$(am__remove_distdir)
dist-tarZ: distdir
tardir=$(distdir) && $(am__tar) | compress -c >$(distdir).tar.Z
$(am__remove_distdir)
dist-shar: distdir
shar $(distdir) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).shar.gz
$(am__remove_distdir)
dist-zip: distdir
-rm -f $(distdir).zip
zip -rq $(distdir).zip $(distdir)
$(am__remove_distdir)
dist dist-all: distdir
tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz
tardir=$(distdir) && $(am__tar) | bzip2 -9 -c >$(distdir).tar.bz2
$(am__remove_distdir)
# This target untars the dist file and tries a VPATH configuration. Then
# it guarantees that the distribution is self-contained by making another
# tarfile.
distcheck: dist
case '$(DIST_ARCHIVES)' in \
*.tar.gz*) \
GZIP=$(GZIP_ENV) gunzip -c $(distdir).tar.gz | $(am__untar) ;;\
*.tar.bz2*) \
bunzip2 -c $(distdir).tar.bz2 | $(am__untar) ;;\
*.tar.Z*) \
uncompress -c $(distdir).tar.Z | $(am__untar) ;;\
*.shar.gz*) \
GZIP=$(GZIP_ENV) gunzip -c $(distdir).shar.gz | unshar ;;\
*.zip*) \
unzip $(distdir).zip ;;\
esac
chmod -R a-w $(distdir); chmod a+w $(distdir)
mkdir $(distdir)/_build
mkdir $(distdir)/_inst
chmod a-w $(distdir)
dc_install_base=`$(am__cd) $(distdir)/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \
&& dc_destdir="$${TMPDIR-/tmp}/am-dc-$$$$/" \
&& cd $(distdir)/_build \
&& ../configure --srcdir=.. --prefix="$$dc_install_base" \
$(DISTCHECK_CONFIGURE_FLAGS) \
&& $(MAKE) $(AM_MAKEFLAGS) \
&& $(MAKE) $(AM_MAKEFLAGS) dvi \
&& $(MAKE) $(AM_MAKEFLAGS) check \
&& $(MAKE) $(AM_MAKEFLAGS) install \
&& $(MAKE) $(AM_MAKEFLAGS) installcheck \
&& $(MAKE) $(AM_MAKEFLAGS) uninstall \
&& $(MAKE) $(AM_MAKEFLAGS) distuninstallcheck_dir="$$dc_install_base" \
distuninstallcheck \
&& chmod -R a-w "$$dc_install_base" \
&& ({ \
(cd ../.. && umask 077 && mkdir "$$dc_destdir") \
&& $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" install \
&& $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" uninstall \
&& $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" \
distuninstallcheck_dir="$$dc_destdir" distuninstallcheck; \
} || { rm -rf "$$dc_destdir"; exit 1; }) \
&& rm -rf "$$dc_destdir" \
&& $(MAKE) $(AM_MAKEFLAGS) dist \
&& rm -rf $(DIST_ARCHIVES) \
&& $(MAKE) $(AM_MAKEFLAGS) distcleancheck
$(am__remove_distdir)
@(echo "$(distdir) archives ready for distribution: "; \
list='$(DIST_ARCHIVES)'; for i in $$list; do echo $$i; done) | \
sed -e '1{h;s/./=/g;p;x;}' -e '$${p;x;}'
distuninstallcheck:
@cd $(distuninstallcheck_dir) \
&& test `$(distuninstallcheck_listfiles) | wc -l` -le 1 \
|| { echo "ERROR: files left after uninstall:" ; \
if test -n "$(DESTDIR)"; then \
echo " (check DESTDIR support)"; \
fi ; \
$(distuninstallcheck_listfiles) ; \
exit 1; } >&2
distcleancheck: distclean
@if test '$(srcdir)' = . ; then \
echo "ERROR: distcleancheck can only run from a VPATH build" ; \
exit 1 ; \
fi
@test `$(distcleancheck_listfiles) | wc -l` -eq 0 \
|| { echo "ERROR: files left in build directory after distclean:" ; \
$(distcleancheck_listfiles) ; \
exit 1; } >&2
check-am: all-am
check: check-recursive
all-am: Makefile
installdirs: installdirs-recursive
installdirs-am:
install: install-recursive
install-exec: install-exec-recursive
install-data: install-data-recursive
uninstall: uninstall-recursive
install-am: all-am
@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
installcheck: installcheck-recursive
install-strip:
$(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
`test -z '$(STRIP)' || \
echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
mostlyclean-generic:
clean-generic:
distclean-generic:
-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
maintainer-clean-generic:
@echo "This command is intended for maintainers to use"
@echo "it deletes files that may require special tools to rebuild."
clean: clean-recursive
clean-am: clean-generic mostlyclean-am
distclean: distclean-recursive
-rm -f $(am__CONFIG_DISTCLEAN_FILES)
-rm -f Makefile
distclean-am: clean-am distclean-generic distclean-tags
dvi: dvi-recursive
dvi-am:
html: html-recursive
info: info-recursive
info-am:
install-data-am:
install-exec-am:
install-info: install-info-recursive
install-man:
installcheck-am:
maintainer-clean: maintainer-clean-recursive
-rm -f $(am__CONFIG_DISTCLEAN_FILES)
-rm -rf $(top_srcdir)/autom4te.cache
-rm -f Makefile
maintainer-clean-am: distclean-am maintainer-clean-generic
mostlyclean: mostlyclean-recursive
mostlyclean-am: mostlyclean-generic
pdf: pdf-recursive
pdf-am:
ps: ps-recursive
ps-am:
uninstall-am: uninstall-info-am
uninstall-info: uninstall-info-recursive
.PHONY: $(RECURSIVE_TARGETS) CTAGS GTAGS all all-am am--refresh check \
check-am clean clean-generic clean-recursive ctags \
ctags-recursive dist dist-all dist-bzip2 dist-gzip dist-shar \
dist-tarZ dist-zip distcheck distclean distclean-generic \
distclean-recursive distclean-tags distcleancheck distdir \
distuninstallcheck dvi dvi-am html html-am info info-am \
install install-am install-data install-data-am install-exec \
install-exec-am install-info install-info-am install-man \
install-strip installcheck installcheck-am installdirs \
installdirs-am maintainer-clean maintainer-clean-generic \
maintainer-clean-recursive mostlyclean mostlyclean-generic \
mostlyclean-recursive pdf pdf-am ps ps-am tags tags-recursive \
uninstall uninstall-am uninstall-info-am
# Tell versions [3.59,3.63) of GNU make to not export all variables.
# Otherwise a system limit (for SysV at least) may be exceeded.
.NOEXPORT:

0
NEWS
View File

View File

@ -1,4 +0,0 @@
AC_DEFUN([LIBCFU_CHECK_TYPE], [
AC_CHECK_TYPE($1, LIBCFU_TYPE_$1="/* $1 is defined */",
LIBCFU_TYPE_$1="typedef $2 $1;")
])

1028
aclocal.m4 vendored

File diff suppressed because it is too large Load Diff

6860
configure vendored

File diff suppressed because it is too large Load Diff

479
depcomp
View File

@ -1,479 +0,0 @@
#! /bin/sh
# depcomp - compile a program generating dependencies as side-effects
# Copyright 1999, 2000, 2003 Free Software Foundation, Inc.
# This program is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation; either version 2, or (at your option)
# any later version.
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
# You should have received a copy of the GNU General Public License
# along with this program; if not, write to the Free Software
# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
# 02111-1307, USA.
# As a special exception to the GNU General Public License, if you
# distribute this file as part of a program that contains a
# configuration script generated by Autoconf, you may include it under
# the same distribution terms that you use for the rest of that program.
# Originally written by Alexandre Oliva <oliva@dcc.unicamp.br>.
if test -z "$depmode" || test -z "$source" || test -z "$object"; then
echo "depcomp: Variables source, object and depmode must be set" 1>&2
exit 1
fi
# `libtool' can also be set to `yes' or `no'.
if test -z "$depfile"; then
base=`echo "$object" | sed -e 's,^.*/,,' -e 's,\.\([^.]*\)$,.P\1,'`
dir=`echo "$object" | sed 's,/.*$,/,'`
if test "$dir" = "$object"; then
dir=
fi
# FIXME: should be _deps on DOS.
depfile="$dir.deps/$base"
fi
tmpdepfile=${tmpdepfile-`echo "$depfile" | sed 's/\.\([^.]*\)$/.T\1/'`}
rm -f "$tmpdepfile"
# Some modes work just like other modes, but use different flags. We
# parameterize here, but still list the modes in the big case below,
# to make depend.m4 easier to write. Note that we *cannot* use a case
# here, because this file can only contain one case statement.
if test "$depmode" = hp; then
# HP compiler uses -M and no extra arg.
gccflag=-M
depmode=gcc
fi
if test "$depmode" = dashXmstdout; then
# This is just like dashmstdout with a different argument.
dashmflag=-xM
depmode=dashmstdout
fi
case "$depmode" in
gcc3)
## gcc 3 implements dependency tracking that does exactly what
## we want. Yay! Note: for some reason libtool 1.4 doesn't like
## it if -MD -MP comes after the -MF stuff. Hmm.
"$@" -MT "$object" -MD -MP -MF "$tmpdepfile"
stat=$?
if test $stat -eq 0; then :
else
rm -f "$tmpdepfile"
exit $stat
fi
mv "$tmpdepfile" "$depfile"
;;
gcc)
## There are various ways to get dependency output from gcc. Here's
## why we pick this rather obscure method:
## - Don't want to use -MD because we'd like the dependencies to end
## up in a subdir. Having to rename by hand is ugly.
## (We might end up doing this anyway to support other compilers.)
## - The DEPENDENCIES_OUTPUT environment variable makes gcc act like
## -MM, not -M (despite what the docs say).
## - Using -M directly means running the compiler twice (even worse
## than renaming).
if test -z "$gccflag"; then
gccflag=-MD,
fi
"$@" -Wp,"$gccflag$tmpdepfile"
stat=$?
if test $stat -eq 0; then :
else
rm -f "$tmpdepfile"
exit $stat
fi
rm -f "$depfile"
echo "$object : \\" > "$depfile"
alpha=ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz
## The second -e expression handles DOS-style file names with drive letters.
sed -e 's/^[^:]*: / /' \
-e 's/^['$alpha']:\/[^:]*: / /' < "$tmpdepfile" >> "$depfile"
## This next piece of magic avoids the `deleted header file' problem.
## The problem is that when a header file which appears in a .P file
## is deleted, the dependency causes make to die (because there is
## typically no way to rebuild the header). We avoid this by adding
## dummy dependencies for each header file. Too bad gcc doesn't do
## this for us directly.
tr ' ' '
' < "$tmpdepfile" |
## Some versions of gcc put a space before the `:'. On the theory
## that the space means something, we add a space to the output as
## well.
## Some versions of the HPUX 10.20 sed can't process this invocation
## correctly. Breaking it into two sed invocations is a workaround.
sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' | sed -e 's/$/ :/' >> "$depfile"
rm -f "$tmpdepfile"
;;
hp)
# This case exists only to let depend.m4 do its work. It works by
# looking at the text of this script. This case will never be run,
# since it is checked for above.
exit 1
;;
sgi)
if test "$libtool" = yes; then
"$@" "-Wp,-MDupdate,$tmpdepfile"
else
"$@" -MDupdate "$tmpdepfile"
fi
stat=$?
if test $stat -eq 0; then :
else
rm -f "$tmpdepfile"
exit $stat
fi
rm -f "$depfile"
if test -f "$tmpdepfile"; then # yes, the sourcefile depend on other files
echo "$object : \\" > "$depfile"
# Clip off the initial element (the dependent). Don't try to be
# clever and replace this with sed code, as IRIX sed won't handle
# lines with more than a fixed number of characters (4096 in
# IRIX 6.2 sed, 8192 in IRIX 6.5). We also remove comment lines;
# the IRIX cc adds comments like `#:fec' to the end of the
# dependency line.
tr ' ' '
' < "$tmpdepfile" \
| sed -e 's/^.*\.o://' -e 's/#.*$//' -e '/^$/ d' | \
tr '
' ' ' >> $depfile
echo >> $depfile
# The second pass generates a dummy entry for each header file.
tr ' ' '
' < "$tmpdepfile" \
| sed -e 's/^.*\.o://' -e 's/#.*$//' -e '/^$/ d' -e 's/$/:/' \
>> $depfile
else
# The sourcefile does not contain any dependencies, so just
# store a dummy comment line, to avoid errors with the Makefile
# "include basename.Plo" scheme.
echo "#dummy" > "$depfile"
fi
rm -f "$tmpdepfile"
;;
aix)
# The C for AIX Compiler uses -M and outputs the dependencies
# in a .u file. In older versions, this file always lives in the
# current directory. Also, the AIX compiler puts `$object:' at the
# start of each line; $object doesn't have directory information.
# Version 6 uses the directory in both cases.
stripped=`echo "$object" | sed 's/\(.*\)\..*$/\1/'`
tmpdepfile="$stripped.u"
if test "$libtool" = yes; then
"$@" -Wc,-M
else
"$@" -M
fi
stat=$?
if test -f "$tmpdepfile"; then :
else
stripped=`echo "$stripped" | sed 's,^.*/,,'`
tmpdepfile="$stripped.u"
fi
if test $stat -eq 0; then :
else
rm -f "$tmpdepfile"
exit $stat
fi
if test -f "$tmpdepfile"; then
outname="$stripped.o"
# Each line is of the form `foo.o: dependent.h'.
# Do two passes, one to just change these to
# `$object: dependent.h' and one to simply `dependent.h:'.
sed -e "s,^$outname:,$object :," < "$tmpdepfile" > "$depfile"
sed -e "s,^$outname: \(.*\)$,\1:," < "$tmpdepfile" >> "$depfile"
else
# The sourcefile does not contain any dependencies, so just
# store a dummy comment line, to avoid errors with the Makefile
# "include basename.Plo" scheme.
echo "#dummy" > "$depfile"
fi
rm -f "$tmpdepfile"
;;
icc)
# Intel's C compiler understands `-MD -MF file'. However on
# icc -MD -MF foo.d -c -o sub/foo.o sub/foo.c
# ICC 7.0 will fill foo.d with something like
# foo.o: sub/foo.c
# foo.o: sub/foo.h
# which is wrong. We want:
# sub/foo.o: sub/foo.c
# sub/foo.o: sub/foo.h
# sub/foo.c:
# sub/foo.h:
# ICC 7.1 will output
# foo.o: sub/foo.c sub/foo.h
# and will wrap long lines using \ :
# foo.o: sub/foo.c ... \
# sub/foo.h ... \
# ...
"$@" -MD -MF "$tmpdepfile"
stat=$?
if test $stat -eq 0; then :
else
rm -f "$tmpdepfile"
exit $stat
fi
rm -f "$depfile"
# Each line is of the form `foo.o: dependent.h',
# or `foo.o: dep1.h dep2.h \', or ` dep3.h dep4.h \'.
# Do two passes, one to just change these to
# `$object: dependent.h' and one to simply `dependent.h:'.
sed "s,^[^:]*:,$object :," < "$tmpdepfile" > "$depfile"
# Some versions of the HPUX 10.20 sed can't process this invocation
# correctly. Breaking it into two sed invocations is a workaround.
sed 's,^[^:]*: \(.*\)$,\1,;s/^\\$//;/^$/d;/:$/d' < "$tmpdepfile" |
sed -e 's/$/ :/' >> "$depfile"
rm -f "$tmpdepfile"
;;
tru64)
# The Tru64 compiler uses -MD to generate dependencies as a side
# effect. `cc -MD -o foo.o ...' puts the dependencies into `foo.o.d'.
# At least on Alpha/Redhat 6.1, Compaq CCC V6.2-504 seems to put
# dependencies in `foo.d' instead, so we check for that too.
# Subdirectories are respected.
dir=`echo "$object" | sed -e 's|/[^/]*$|/|'`
test "x$dir" = "x$object" && dir=
base=`echo "$object" | sed -e 's|^.*/||' -e 's/\.o$//' -e 's/\.lo$//'`
if test "$libtool" = yes; then
tmpdepfile1="$dir.libs/$base.lo.d"
tmpdepfile2="$dir.libs/$base.d"
"$@" -Wc,-MD
else
tmpdepfile1="$dir$base.o.d"
tmpdepfile2="$dir$base.d"
"$@" -MD
fi
stat=$?
if test $stat -eq 0; then :
else
rm -f "$tmpdepfile1" "$tmpdepfile2"
exit $stat
fi
if test -f "$tmpdepfile1"; then
tmpdepfile="$tmpdepfile1"
else
tmpdepfile="$tmpdepfile2"
fi
if test -f "$tmpdepfile"; then
sed -e "s,^.*\.[a-z]*:,$object:," < "$tmpdepfile" > "$depfile"
# That's a tab and a space in the [].
sed -e 's,^.*\.[a-z]*:[ ]*,,' -e 's,$,:,' < "$tmpdepfile" >> "$depfile"
else
echo "#dummy" > "$depfile"
fi
rm -f "$tmpdepfile"
;;
#nosideeffect)
# This comment above is used by automake to tell side-effect
# dependency tracking mechanisms from slower ones.
dashmstdout)
# Important note: in order to support this mode, a compiler *must*
# always write the preprocessed file to stdout, regardless of -o.
"$@" || exit $?
# Remove the call to Libtool.
if test "$libtool" = yes; then
while test $1 != '--mode=compile'; do
shift
done
shift
fi
# Remove `-o $object'.
IFS=" "
for arg
do
case $arg in
-o)
shift
;;
$object)
shift
;;
*)
set fnord "$@" "$arg"
shift # fnord
shift # $arg
;;
esac
done
test -z "$dashmflag" && dashmflag=-M
# Require at least two characters before searching for `:'
# in the target name. This is to cope with DOS-style filenames:
# a dependency such as `c:/foo/bar' could be seen as target `c' otherwise.
"$@" $dashmflag |
sed 's:^[ ]*[^: ][^:][^:]*\:[ ]*:'"$object"'\: :' > "$tmpdepfile"
rm -f "$depfile"
cat < "$tmpdepfile" > "$depfile"
tr ' ' '
' < "$tmpdepfile" | \
## Some versions of the HPUX 10.20 sed can't process this invocation
## correctly. Breaking it into two sed invocations is a workaround.
sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' | sed -e 's/$/ :/' >> "$depfile"
rm -f "$tmpdepfile"
;;
dashXmstdout)
# This case only exists to satisfy depend.m4. It is never actually
# run, as this mode is specially recognized in the preamble.
exit 1
;;
makedepend)
"$@" || exit $?
# Remove any Libtool call
if test "$libtool" = yes; then
while test $1 != '--mode=compile'; do
shift
done
shift
fi
# X makedepend
shift
cleared=no
for arg in "$@"; do
case $cleared in
no)
set ""; shift
cleared=yes ;;
esac
case "$arg" in
-D*|-I*)
set fnord "$@" "$arg"; shift ;;
# Strip any option that makedepend may not understand. Remove
# the object too, otherwise makedepend will parse it as a source file.
-*|$object)
;;
*)
set fnord "$@" "$arg"; shift ;;
esac
done
obj_suffix="`echo $object | sed 's/^.*\././'`"
touch "$tmpdepfile"
${MAKEDEPEND-makedepend} -o"$obj_suffix" -f"$tmpdepfile" "$@"
rm -f "$depfile"
cat < "$tmpdepfile" > "$depfile"
sed '1,2d' "$tmpdepfile" | tr ' ' '
' | \
## Some versions of the HPUX 10.20 sed can't process this invocation
## correctly. Breaking it into two sed invocations is a workaround.
sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' | sed -e 's/$/ :/' >> "$depfile"
rm -f "$tmpdepfile" "$tmpdepfile".bak
;;
cpp)
# Important note: in order to support this mode, a compiler *must*
# always write the preprocessed file to stdout.
"$@" || exit $?
# Remove the call to Libtool.
if test "$libtool" = yes; then
while test $1 != '--mode=compile'; do
shift
done
shift
fi
# Remove `-o $object'.
IFS=" "
for arg
do
case $arg in
-o)
shift
;;
$object)
shift
;;
*)
set fnord "$@" "$arg"
shift # fnord
shift # $arg
;;
esac
done
"$@" -E |
sed -n '/^# [0-9][0-9]* "\([^"]*\)".*/ s:: \1 \\:p' |
sed '$ s: \\$::' > "$tmpdepfile"
rm -f "$depfile"
echo "$object : \\" > "$depfile"
cat < "$tmpdepfile" >> "$depfile"
sed < "$tmpdepfile" '/^$/d;s/^ //;s/ \\$//;s/$/ :/' >> "$depfile"
rm -f "$tmpdepfile"
;;
msvisualcpp)
# Important note: in order to support this mode, a compiler *must*
# always write the preprocessed file to stdout, regardless of -o,
# because we must use -o when running libtool.
"$@" || exit $?
IFS=" "
for arg
do
case "$arg" in
"-Gm"|"/Gm"|"-Gi"|"/Gi"|"-ZI"|"/ZI")
set fnord "$@"
shift
shift
;;
*)
set fnord "$@" "$arg"
shift
shift
;;
esac
done
"$@" -E |
sed -n '/^#line [0-9][0-9]* "\([^"]*\)"/ s::echo "`cygpath -u \\"\1\\"`":p' | sort | uniq > "$tmpdepfile"
rm -f "$depfile"
echo "$object : \\" > "$depfile"
. "$tmpdepfile" | sed 's% %\\ %g' | sed -n '/^\(.*\)$/ s:: \1 \\:p' >> "$depfile"
echo " " >> "$depfile"
. "$tmpdepfile" | sed 's% %\\ %g' | sed -n '/^\(.*\)$/ s::\1\::p' >> "$depfile"
rm -f "$tmpdepfile"
;;
none)
exec "$@"
;;
*)
echo "Unknown depmode $depmode" 1>&2
exit 1
;;
esac
exit 0

View File

@ -1,461 +0,0 @@
# Makefile.in generated by automake 1.9.2 from Makefile.am.
# @configure_input@
# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
# 2003, 2004 Free Software Foundation, Inc.
# This Makefile.in is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
# PARTICULAR PURPOSE.
@SET_MAKE@
srcdir = @srcdir@
top_srcdir = @top_srcdir@
VPATH = @srcdir@
pkgdatadir = $(datadir)/@PACKAGE@
pkglibdir = $(libdir)/@PACKAGE@
pkgincludedir = $(includedir)/@PACKAGE@
top_builddir = ..
am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
INSTALL = @INSTALL@
install_sh_DATA = $(install_sh) -c -m 644
install_sh_PROGRAM = $(install_sh) -c
install_sh_SCRIPT = $(install_sh) -c
INSTALL_HEADER = $(INSTALL_DATA)
transform = $(program_transform_name)
NORMAL_INSTALL = :
PRE_INSTALL = :
POST_INSTALL = :
NORMAL_UNINSTALL = :
PRE_UNINSTALL = :
POST_UNINSTALL = :
subdir = doc
DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in \
$(srcdir)/stamp-vti $(srcdir)/version.texi mdate-sh \
texinfo.tex
ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
am__aclocal_m4_deps = $(top_srcdir)/acinclude.m4 \
$(top_srcdir)/configure.ac
am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
$(ACLOCAL_M4)
mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs
CONFIG_CLEAN_FILES =
SOURCES =
DIST_SOURCES =
INFO_DEPS = $(srcdir)/libcfu.info
am__TEXINFO_TEX_DIR = $(srcdir)
DVIS = libcfu.dvi
PDFS = libcfu.pdf
PSS = libcfu.ps
HTMLS = libcfu.html
TEXINFOS = libcfu.texi
TEXI2PDF = $(TEXI2DVI) --pdf --batch
MAKEINFOHTML = $(MAKEINFO) --html
AM_MAKEINFOHTMLFLAGS = $(AM_MAKEINFOFLAGS)
am__installdirs = "$(DESTDIR)$(infodir)"
DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
ACLOCAL = @ACLOCAL@
AMDEP_FALSE = @AMDEP_FALSE@
AMDEP_TRUE = @AMDEP_TRUE@
AMTAR = @AMTAR@
AUTOCONF = @AUTOCONF@
AUTOHEADER = @AUTOHEADER@
AUTOMAKE = @AUTOMAKE@
AWK = @AWK@
CC = @CC@
CCDEPMODE = @CCDEPMODE@
CFLAGS = @CFLAGS@
CPP = @CPP@
CPPFLAGS = @CPPFLAGS@
CYGPATH_W = @CYGPATH_W@
DEBUG_FALSE = @DEBUG_FALSE@
DEBUG_TRUE = @DEBUG_TRUE@
DEFS = @DEFS@
DEPDIR = @DEPDIR@
ECHO_C = @ECHO_C@
ECHO_N = @ECHO_N@
ECHO_T = @ECHO_T@
EGREP = @EGREP@
EXEEXT = @EXEEXT@
INSTALL_DATA = @INSTALL_DATA@
INSTALL_PROGRAM = @INSTALL_PROGRAM@
INSTALL_SCRIPT = @INSTALL_SCRIPT@
INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
LDFLAGS = @LDFLAGS@
LIBCFU_TYPE_u_int = @LIBCFU_TYPE_u_int@
LIBOBJS = @LIBOBJS@
LIBS = @LIBS@
LTLIBOBJS = @LTLIBOBJS@
MAKEINFO = case $@ in \
*.info) echo " INFO $@";; \
*.html) echo " HTML $@";; \
esac && @MAKEINFO@
OBJEXT = @OBJEXT@
PACKAGE = @PACKAGE@
PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
PACKAGE_NAME = @PACKAGE_NAME@
PACKAGE_STRING = @PACKAGE_STRING@
PACKAGE_TARNAME = @PACKAGE_TARNAME@
PACKAGE_VERSION = @PACKAGE_VERSION@
PATH_SEPARATOR = @PATH_SEPARATOR@
RANLIB = @RANLIB@
SET_MAKE = @SET_MAKE@
SHELL = @SHELL@
STRIP = @STRIP@
VERSION = @VERSION@
ac_ct_CC = @ac_ct_CC@
ac_ct_RANLIB = @ac_ct_RANLIB@
ac_ct_STRIP = @ac_ct_STRIP@
am__fastdepCC_FALSE = @am__fastdepCC_FALSE@
am__fastdepCC_TRUE = @am__fastdepCC_TRUE@
am__include = @am__include@
am__leading_dot = @am__leading_dot@
am__quote = @am__quote@
am__tar = @am__tar@
am__untar = @am__untar@
bindir = @bindir@
build_alias = @build_alias@
datadir = @datadir@
exec_prefix = @exec_prefix@
host_alias = @host_alias@
includedir = @includedir@
infodir = @infodir@
install_sh = @install_sh@
libdir = @libdir@
libexecdir = @libexecdir@
localstatedir = @localstatedir@
mandir = @mandir@
mkdir_p = @mkdir_p@
oldincludedir = @oldincludedir@
prefix = @prefix@
program_transform_name = @program_transform_name@
sbindir = @sbindir@
sharedstatedir = @sharedstatedir@
sysconfdir = @sysconfdir@
target_alias = @target_alias@
TEXI2DVI = && case $@ in \
*.dvi) echo " DVI $@";; \
*.pdf) echo " PDF $@";; \
esac && texi2dvi --quiet
DVIPS = echo " PS $@" && dvips -q
info_TEXINFOS = libcfu.texi
all: all-am
.SUFFIXES:
.SUFFIXES: .dvi .html .info .pdf .ps .texi
$(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(am__configure_deps)
@for dep in $?; do \
case '$(am__configure_deps)' in \
*$$dep*) \
cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh \
&& exit 0; \
exit 1;; \
esac; \
done; \
echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu doc/Makefile'; \
cd $(top_srcdir) && \
$(AUTOMAKE) --gnu doc/Makefile
.PRECIOUS: Makefile
Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
@case '$?' in \
*config.status*) \
cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
*) \
echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
esac;
$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
$(top_srcdir)/configure: $(am__configure_deps)
cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
$(ACLOCAL_M4): $(am__aclocal_m4_deps)
cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
.texi.info:
restore=: && backupdir="$(am__leading_dot)am$$$$" && \
am__cwd=`pwd` && cd $(srcdir) && \
rm -rf $$backupdir && mkdir $$backupdir && \
for f in $@ $@-[0-9] $@-[0-9][0-9] $(@:.info=).i[0-9] $(@:.info=).i[0-9][0-9]; do \
if test -f $$f; then mv $$f $$backupdir; restore=mv; else :; fi; \
done; \
cd "$$am__cwd"; \
if $(MAKEINFO) $(AM_MAKEINFOFLAGS) $(MAKEINFOFLAGS) -I $(srcdir) \
-o $@ $<; \
then \
rc=0; \
cd $(srcdir); \
else \
rc=$$?; \
cd $(srcdir) && \
$$restore $$backupdir/* `echo "./$@" | sed 's|[^/]*$$||'`; \
fi; \
rm -rf $$backupdir; exit $$rc
.texi.dvi:
TEXINPUTS="$(am__TEXINFO_TEX_DIR)$(PATH_SEPARATOR)$$TEXINPUTS" \
MAKEINFO='$(MAKEINFO) $(AM_MAKEINFOFLAGS) $(MAKEINFOFLAGS) -I $(srcdir)' \
$(TEXI2DVI) $<
.texi.pdf:
TEXINPUTS="$(am__TEXINFO_TEX_DIR)$(PATH_SEPARATOR)$$TEXINPUTS" \
MAKEINFO='$(MAKEINFO) $(AM_MAKEINFOFLAGS) $(MAKEINFOFLAGS) -I $(srcdir)' \
$(TEXI2PDF) $<
.texi.html:
rm -rf $(@:.html=.htp)
if $(MAKEINFOHTML) $(AM_MAKEINFOHTMLFLAGS) $(MAKEINFOFLAGS) -I $(srcdir) \
-o $(@:.html=.htp) $<; \
then \
rm -rf $@; \
if test ! -d $(@:.html=.htp) && test -d $(@:.html=); then \
mv $(@:.html=) $@; else mv $(@:.html=.htp) $@; fi; \
else \
if test ! -d $(@:.html=.htp) && test -d $(@:.html=); then \
rm -rf $(@:.html=); else rm -Rf $(@:.html=.htp) $@; fi; \
exit 1; \
fi
$(srcdir)/libcfu.info: libcfu.texi $(srcdir)/version.texi
libcfu.dvi: libcfu.texi $(srcdir)/version.texi
libcfu.pdf: libcfu.texi $(srcdir)/version.texi
libcfu.html: libcfu.texi $(srcdir)/version.texi
$(srcdir)/version.texi: $(srcdir)/stamp-vti
$(srcdir)/stamp-vti: libcfu.texi $(top_srcdir)/configure
@(dir=.; test -f ./libcfu.texi || dir=$(srcdir); \
set `$(SHELL) $(srcdir)/mdate-sh $$dir/libcfu.texi`; \
echo "@set UPDATED $$1 $$2 $$3"; \
echo "@set UPDATED-MONTH $$2 $$3"; \
echo "@set EDITION $(VERSION)"; \
echo "@set VERSION $(VERSION)") > vti.tmp
@cmp -s vti.tmp $(srcdir)/version.texi \
|| (echo "Updating $(srcdir)/version.texi"; \
cp vti.tmp $(srcdir)/version.texi)
-@rm -f vti.tmp
@cp $(srcdir)/version.texi $@
mostlyclean-vti:
-rm -f vti.tmp
maintainer-clean-vti:
-rm -f $(srcdir)/stamp-vti $(srcdir)/version.texi
.dvi.ps:
$(DVIPS) -o $@ $<
uninstall-info-am:
$(PRE_UNINSTALL)
@if (install-info --version && \
install-info --version 2>&1 | sed 1q | grep -i -v debian) >/dev/null 2>&1; then \
list='$(INFO_DEPS)'; \
for file in $$list; do \
relfile=`echo "$$file" | sed 's|^.*/||'`; \
echo " install-info --info-dir='$(DESTDIR)$(infodir)' --remove '$(DESTDIR)$(infodir)/$$relfile'"; \
install-info --info-dir="$(DESTDIR)$(infodir)" --remove "$(DESTDIR)$(infodir)/$$relfile"; \
done; \
else :; fi
@$(NORMAL_UNINSTALL)
@list='$(INFO_DEPS)'; \
for file in $$list; do \
relfile=`echo "$$file" | sed 's|^.*/||'`; \
relfile_i=`echo "$$relfile" | sed 's|\.info$$||;s|$$|.i|'`; \
(if cd "$(DESTDIR)$(infodir)"; then \
echo " rm -f $$relfile $$relfile-[0-9] $$relfile-[0-9][0-9] $$relfile_i[0-9] $$relfile_i[0-9][0-9])"; \
rm -f $$relfile $$relfile-[0-9] $$relfile-[0-9][0-9] $$relfile_i[0-9] $$relfile_i[0-9][0-9]; \
else :; fi); \
done
dist-info: $(INFO_DEPS)
@srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \
list='$(INFO_DEPS)'; \
for base in $$list; do \
case $$base in \
$(srcdir)/*) base=`echo "$$base" | sed "s|^$$srcdirstrip/||"`;; \
esac; \
if test -f $$base; then d=.; else d=$(srcdir); fi; \
for file in $$d/$$base*; do \
relfile=`expr "$$file" : "$$d/\(.*\)"`; \
test -f $(distdir)/$$relfile || \
cp -p $$file $(distdir)/$$relfile; \
done; \
done
mostlyclean-aminfo:
-rm -rf libcfu.aux libcfu.cp libcfu.cps libcfu.fn libcfu.fns libcfu.ky \
libcfu.kys libcfu.log libcfu.pg libcfu.pgs libcfu.tmp \
libcfu.toc libcfu.tp libcfu.tps libcfu.vr libcfu.vrs \
libcfu.dvi libcfu.pdf libcfu.ps libcfu.html
maintainer-clean-aminfo:
@list='$(INFO_DEPS)'; for i in $$list; do \
i_i=`echo "$$i" | sed 's|\.info$$||;s|$$|.i|'`; \
echo " rm -f $$i $$i-[0-9] $$i-[0-9][0-9] $$i_i[0-9] $$i_i[0-9][0-9]"; \
rm -f $$i $$i-[0-9] $$i-[0-9][0-9] $$i_i[0-9] $$i_i[0-9][0-9]; \
done
tags: TAGS
TAGS:
ctags: CTAGS
CTAGS:
distdir: $(DISTFILES)
@srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \
topsrcdirstrip=`echo "$(top_srcdir)" | sed 's|.|.|g'`; \
list='$(DISTFILES)'; for file in $$list; do \
case $$file in \
$(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \
$(top_srcdir)/*) file=`echo "$$file" | sed "s|^$$topsrcdirstrip/|$(top_builddir)/|"`;; \
esac; \
if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \
if test "$$dir" != "$$file" && test "$$dir" != "."; then \
dir="/$$dir"; \
$(mkdir_p) "$(distdir)$$dir"; \
else \
dir=''; \
fi; \
if test -d $$d/$$file; then \
if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
fi; \
cp -pR $$d/$$file $(distdir)$$dir || exit 1; \
else \
test -f $(distdir)/$$file \
|| cp -p $$d/$$file $(distdir)/$$file \
|| exit 1; \
fi; \
done
$(MAKE) $(AM_MAKEFLAGS) \
top_distdir="$(top_distdir)" distdir="$(distdir)" \
dist-info
check-am: all-am
check: check-am
all-am: Makefile $(INFO_DEPS)
installdirs:
for dir in "$(DESTDIR)$(infodir)"; do \
test -z "$$dir" || $(mkdir_p) "$$dir"; \
done
install: install-am
install-exec: install-exec-am
install-data: install-data-am
uninstall: uninstall-am
install-am: all-am
@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
installcheck: installcheck-am
install-strip:
$(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
`test -z '$(STRIP)' || \
echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
mostlyclean-generic:
clean-generic:
distclean-generic:
-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
maintainer-clean-generic:
@echo "This command is intended for maintainers to use"
@echo "it deletes files that may require special tools to rebuild."
clean: clean-am
clean-am: clean-generic mostlyclean-am
distclean: distclean-am
-rm -f Makefile
distclean-am: clean-am distclean-generic
dvi: dvi-am
dvi-am: $(DVIS)
html: html-am
html-am: $(HTMLS)
info: info-am
info-am: $(INFO_DEPS)
install-data-am: install-info-am
install-exec-am:
install-info: install-info-am
install-info-am: $(INFO_DEPS)
@$(NORMAL_INSTALL)
test -z "$(infodir)" || $(mkdir_p) "$(DESTDIR)$(infodir)"
@srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \
list='$(INFO_DEPS)'; \
for file in $$list; do \
case $$file in \
$(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \
esac; \
if test -f $$file; then d=.; else d=$(srcdir); fi; \
file_i=`echo "$$file" | sed 's|\.info$$||;s|$$|.i|'`; \
for ifile in $$d/$$file $$d/$$file-[0-9] $$d/$$file-[0-9][0-9] \
$$d/$$file_i[0-9] $$d/$$file_i[0-9][0-9] ; do \
if test -f $$ifile; then \
relfile=`echo "$$ifile" | sed 's|^.*/||'`; \
echo " $(INSTALL_DATA) '$$ifile' '$(DESTDIR)$(infodir)/$$relfile'"; \
$(INSTALL_DATA) "$$ifile" "$(DESTDIR)$(infodir)/$$relfile"; \
else : ; fi; \
done; \
done
@$(POST_INSTALL)
@if (install-info --version && \
install-info --version 2>&1 | sed 1q | grep -i -v debian) >/dev/null 2>&1; then \
list='$(INFO_DEPS)'; \
for file in $$list; do \
relfile=`echo "$$file" | sed 's|^.*/||'`; \
echo " install-info --info-dir='$(DESTDIR)$(infodir)' '$(DESTDIR)$(infodir)/$$relfile'";\
install-info --info-dir="$(DESTDIR)$(infodir)" "$(DESTDIR)$(infodir)/$$relfile" || :;\
done; \
else : ; fi
install-man:
installcheck-am:
maintainer-clean: maintainer-clean-am
-rm -f Makefile
maintainer-clean-am: distclean-am maintainer-clean-aminfo \
maintainer-clean-generic maintainer-clean-vti
mostlyclean: mostlyclean-am
mostlyclean-am: mostlyclean-aminfo mostlyclean-generic mostlyclean-vti
pdf: pdf-am
pdf-am: $(PDFS)
ps: ps-am
ps-am: $(PSS)
uninstall-am: uninstall-info-am
.PHONY: all all-am check check-am clean clean-generic dist-info \
distclean distclean-generic distdir dvi dvi-am html html-am \
info info-am install install-am install-data install-data-am \
install-exec install-exec-am install-info install-info-am \
install-man install-strip installcheck installcheck-am \
installdirs maintainer-clean maintainer-clean-aminfo \
maintainer-clean-generic maintainer-clean-vti mostlyclean \
mostlyclean-aminfo mostlyclean-generic mostlyclean-vti pdf \
pdf-am ps ps-am uninstall uninstall-am uninstall-info-am
.SILENT:
# Tell versions [3.59,3.63) of GNU make to not export all variables.
# Otherwise a system limit (for SysV at least) may be exceeded.
.NOEXPORT:

View File

@ -1,4 +0,0 @@
@set UPDATED 4 September 2005
@set UPDATED-MONTH September 2005
@set EDITION 0.03
@set VERSION 0.03

View File

@ -1,418 +0,0 @@
# Makefile.in generated by automake 1.9.2 from Makefile.am.
# @configure_input@
# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
# 2003, 2004 Free Software Foundation, Inc.
# This Makefile.in is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
# PARTICULAR PURPOSE.
@SET_MAKE@
SOURCES = conf_example.c conf_example2.c hash_usage.c large_hash.c opt_example.c strings.c
srcdir = @srcdir@
top_srcdir = @top_srcdir@
VPATH = @srcdir@
pkgdatadir = $(datadir)/@PACKAGE@
pkglibdir = $(libdir)/@PACKAGE@
pkgincludedir = $(includedir)/@PACKAGE@
top_builddir = ..
am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
INSTALL = @INSTALL@
install_sh_DATA = $(install_sh) -c -m 644
install_sh_PROGRAM = $(install_sh) -c
install_sh_SCRIPT = $(install_sh) -c
INSTALL_HEADER = $(INSTALL_DATA)
transform = $(program_transform_name)
NORMAL_INSTALL = :
PRE_INSTALL = :
POST_INSTALL = :
NORMAL_UNINSTALL = :
PRE_UNINSTALL = :
POST_UNINSTALL = :
noinst_PROGRAMS = hash_usage$(EXEEXT) large_hash$(EXEEXT) \
strings$(EXEEXT) conf_example$(EXEEXT) conf_example2$(EXEEXT) \
opt_example$(EXEEXT)
subdir = examples
DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in
ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
am__aclocal_m4_deps = $(top_srcdir)/acinclude.m4 \
$(top_srcdir)/configure.ac
am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
$(ACLOCAL_M4)
mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs
CONFIG_CLEAN_FILES =
PROGRAMS = $(noinst_PROGRAMS)
conf_example_SOURCES = conf_example.c
conf_example_OBJECTS = conf_example.$(OBJEXT)
conf_example_LDADD = $(LDADD)
conf_example_DEPENDENCIES =
conf_example2_SOURCES = conf_example2.c
conf_example2_OBJECTS = conf_example2.$(OBJEXT)
conf_example2_LDADD = $(LDADD)
conf_example2_DEPENDENCIES =
hash_usage_SOURCES = hash_usage.c
hash_usage_OBJECTS = hash_usage.$(OBJEXT)
hash_usage_LDADD = $(LDADD)
hash_usage_DEPENDENCIES =
large_hash_SOURCES = large_hash.c
large_hash_OBJECTS = large_hash.$(OBJEXT)
large_hash_LDADD = $(LDADD)
large_hash_DEPENDENCIES =
opt_example_SOURCES = opt_example.c
opt_example_OBJECTS = opt_example.$(OBJEXT)
opt_example_LDADD = $(LDADD)
opt_example_DEPENDENCIES =
strings_SOURCES = strings.c
strings_OBJECTS = strings.$(OBJEXT)
strings_LDADD = $(LDADD)
strings_DEPENDENCIES =
DEFAULT_INCLUDES = -I. -I$(srcdir)
depcomp = $(SHELL) $(top_srcdir)/depcomp
am__depfiles_maybe = depfiles
COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \
$(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
CCLD = $(CC)
LINK = $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(AM_LDFLAGS) $(LDFLAGS) -o $@
SOURCES = conf_example.c conf_example2.c hash_usage.c large_hash.c \
opt_example.c strings.c
DIST_SOURCES = conf_example.c conf_example2.c hash_usage.c \
large_hash.c opt_example.c strings.c
ETAGS = etags
CTAGS = ctags
DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
ACLOCAL = @ACLOCAL@
AMDEP_FALSE = @AMDEP_FALSE@
AMDEP_TRUE = @AMDEP_TRUE@
AMTAR = @AMTAR@
AUTOCONF = @AUTOCONF@
AUTOHEADER = @AUTOHEADER@
AUTOMAKE = @AUTOMAKE@
AWK = @AWK@
CC = @CC@
CCDEPMODE = @CCDEPMODE@
CFLAGS = @CFLAGS@
CPP = @CPP@
CPPFLAGS = @CPPFLAGS@
CYGPATH_W = @CYGPATH_W@
DEBUG_FALSE = @DEBUG_FALSE@
DEBUG_TRUE = @DEBUG_TRUE@
DEFS = @DEFS@
DEPDIR = @DEPDIR@
ECHO_C = @ECHO_C@
ECHO_N = @ECHO_N@
ECHO_T = @ECHO_T@
EGREP = @EGREP@
EXEEXT = @EXEEXT@
INSTALL_DATA = @INSTALL_DATA@
INSTALL_PROGRAM = @INSTALL_PROGRAM@
INSTALL_SCRIPT = @INSTALL_SCRIPT@
INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
LDFLAGS = @LDFLAGS@
LIBCFU_TYPE_u_int = @LIBCFU_TYPE_u_int@
LIBOBJS = @LIBOBJS@
LIBS = @LIBS@
LTLIBOBJS = @LTLIBOBJS@
MAKEINFO = @MAKEINFO@
OBJEXT = @OBJEXT@
PACKAGE = @PACKAGE@
PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
PACKAGE_NAME = @PACKAGE_NAME@
PACKAGE_STRING = @PACKAGE_STRING@
PACKAGE_TARNAME = @PACKAGE_TARNAME@
PACKAGE_VERSION = @PACKAGE_VERSION@
PATH_SEPARATOR = @PATH_SEPARATOR@
RANLIB = @RANLIB@
SET_MAKE = @SET_MAKE@
SHELL = @SHELL@
STRIP = @STRIP@
VERSION = @VERSION@
ac_ct_CC = @ac_ct_CC@
ac_ct_RANLIB = @ac_ct_RANLIB@
ac_ct_STRIP = @ac_ct_STRIP@
am__fastdepCC_FALSE = @am__fastdepCC_FALSE@
am__fastdepCC_TRUE = @am__fastdepCC_TRUE@
am__include = @am__include@
am__leading_dot = @am__leading_dot@
am__quote = @am__quote@
am__tar = @am__tar@
am__untar = @am__untar@
bindir = @bindir@
build_alias = @build_alias@
datadir = @datadir@
exec_prefix = @exec_prefix@
host_alias = @host_alias@
includedir = @includedir@
infodir = @infodir@
install_sh = @install_sh@
libdir = @libdir@
libexecdir = @libexecdir@
localstatedir = @localstatedir@
mandir = @mandir@
mkdir_p = @mkdir_p@
oldincludedir = @oldincludedir@
prefix = @prefix@
program_transform_name = @program_transform_name@
sbindir = @sbindir@
sharedstatedir = @sharedstatedir@
sysconfdir = @sysconfdir@
target_alias = @target_alias@
LDADD = -L$(top_srcdir)/src -lcfu
@DEBUG_FALSE@AM_CFLAGS = -Wall -W -Werror -I$(top_srcdir)/include
@DEBUG_TRUE@AM_CFLAGS = -Wall -W -Werror -I$(top_srcdir)/include -DCFU_DEBUG=1
AM_LDFLAGS = -Xlinker -rpath -Xlinker $(top_src_dir)/src
all: all-am
.SUFFIXES:
.SUFFIXES: .c .o .obj
$(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(am__configure_deps)
@for dep in $?; do \
case '$(am__configure_deps)' in \
*$$dep*) \
cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh \
&& exit 0; \
exit 1;; \
esac; \
done; \
echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu examples/Makefile'; \
cd $(top_srcdir) && \
$(AUTOMAKE) --gnu examples/Makefile
.PRECIOUS: Makefile
Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
@case '$?' in \
*config.status*) \
cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
*) \
echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
esac;
$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
$(top_srcdir)/configure: $(am__configure_deps)
cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
$(ACLOCAL_M4): $(am__aclocal_m4_deps)
cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
clean-noinstPROGRAMS:
-test -z "$(noinst_PROGRAMS)" || rm -f $(noinst_PROGRAMS)
conf_example$(EXEEXT): $(conf_example_OBJECTS) $(conf_example_DEPENDENCIES)
@rm -f conf_example$(EXEEXT)
$(LINK) $(conf_example_LDFLAGS) $(conf_example_OBJECTS) $(conf_example_LDADD) $(LIBS)
conf_example2$(EXEEXT): $(conf_example2_OBJECTS) $(conf_example2_DEPENDENCIES)
@rm -f conf_example2$(EXEEXT)
$(LINK) $(conf_example2_LDFLAGS) $(conf_example2_OBJECTS) $(conf_example2_LDADD) $(LIBS)
hash_usage$(EXEEXT): $(hash_usage_OBJECTS) $(hash_usage_DEPENDENCIES)
@rm -f hash_usage$(EXEEXT)
$(LINK) $(hash_usage_LDFLAGS) $(hash_usage_OBJECTS) $(hash_usage_LDADD) $(LIBS)
large_hash$(EXEEXT): $(large_hash_OBJECTS) $(large_hash_DEPENDENCIES)
@rm -f large_hash$(EXEEXT)
$(LINK) $(large_hash_LDFLAGS) $(large_hash_OBJECTS) $(large_hash_LDADD) $(LIBS)
opt_example$(EXEEXT): $(opt_example_OBJECTS) $(opt_example_DEPENDENCIES)
@rm -f opt_example$(EXEEXT)
$(LINK) $(opt_example_LDFLAGS) $(opt_example_OBJECTS) $(opt_example_LDADD) $(LIBS)
strings$(EXEEXT): $(strings_OBJECTS) $(strings_DEPENDENCIES)
@rm -f strings$(EXEEXT)
$(LINK) $(strings_LDFLAGS) $(strings_OBJECTS) $(strings_LDADD) $(LIBS)
mostlyclean-compile:
-rm -f *.$(OBJEXT)
distclean-compile:
-rm -f *.tab.c
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/conf_example.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/conf_example2.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/hash_usage.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/large_hash.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/opt_example.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/strings.Po@am__quote@
.c.o:
@am__fastdepCC_TRUE@ if $(COMPILE) -MT $@ -MD -MP -MF "$(DEPDIR)/$*.Tpo" -c -o $@ $<; \
@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/$*.Tpo" "$(DEPDIR)/$*.Po"; else rm -f "$(DEPDIR)/$*.Tpo"; exit 1; fi
@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
@am__fastdepCC_FALSE@ $(COMPILE) -c $<
.c.obj:
@am__fastdepCC_TRUE@ if $(COMPILE) -MT $@ -MD -MP -MF "$(DEPDIR)/$*.Tpo" -c -o $@ `$(CYGPATH_W) '$<'`; \
@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/$*.Tpo" "$(DEPDIR)/$*.Po"; else rm -f "$(DEPDIR)/$*.Tpo"; exit 1; fi
@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
@am__fastdepCC_FALSE@ $(COMPILE) -c `$(CYGPATH_W) '$<'`
uninstall-info-am:
ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
unique=`for i in $$list; do \
if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
done | \
$(AWK) ' { files[$$0] = 1; } \
END { for (i in files) print i; }'`; \
mkid -fID $$unique
tags: TAGS
TAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \
$(TAGS_FILES) $(LISP)
tags=; \
here=`pwd`; \
list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
unique=`for i in $$list; do \
if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
done | \
$(AWK) ' { files[$$0] = 1; } \
END { for (i in files) print i; }'`; \
if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \
test -n "$$unique" || unique=$$empty_fix; \
$(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
$$tags $$unique; \
fi
ctags: CTAGS
CTAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \
$(TAGS_FILES) $(LISP)
tags=; \
here=`pwd`; \
list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
unique=`for i in $$list; do \
if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
done | \
$(AWK) ' { files[$$0] = 1; } \
END { for (i in files) print i; }'`; \
test -z "$(CTAGS_ARGS)$$tags$$unique" \
|| $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
$$tags $$unique
GTAGS:
here=`$(am__cd) $(top_builddir) && pwd` \
&& cd $(top_srcdir) \
&& gtags -i $(GTAGS_ARGS) $$here
distclean-tags:
-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
distdir: $(DISTFILES)
@srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \
topsrcdirstrip=`echo "$(top_srcdir)" | sed 's|.|.|g'`; \
list='$(DISTFILES)'; for file in $$list; do \
case $$file in \
$(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \
$(top_srcdir)/*) file=`echo "$$file" | sed "s|^$$topsrcdirstrip/|$(top_builddir)/|"`;; \
esac; \
if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \
if test "$$dir" != "$$file" && test "$$dir" != "."; then \
dir="/$$dir"; \
$(mkdir_p) "$(distdir)$$dir"; \
else \
dir=''; \
fi; \
if test -d $$d/$$file; then \
if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
fi; \
cp -pR $$d/$$file $(distdir)$$dir || exit 1; \
else \
test -f $(distdir)/$$file \
|| cp -p $$d/$$file $(distdir)/$$file \
|| exit 1; \
fi; \
done
check-am: all-am
check: check-am
all-am: Makefile $(PROGRAMS)
installdirs:
install: install-am
install-exec: install-exec-am
install-data: install-data-am
uninstall: uninstall-am
install-am: all-am
@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
installcheck: installcheck-am
install-strip:
$(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
`test -z '$(STRIP)' || \
echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
mostlyclean-generic:
clean-generic:
distclean-generic:
-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
maintainer-clean-generic:
@echo "This command is intended for maintainers to use"
@echo "it deletes files that may require special tools to rebuild."
clean: clean-am
clean-am: clean-generic clean-noinstPROGRAMS mostlyclean-am
distclean: distclean-am
-rm -rf ./$(DEPDIR)
-rm -f Makefile
distclean-am: clean-am distclean-compile distclean-generic \
distclean-tags
dvi: dvi-am
dvi-am:
html: html-am
info: info-am
info-am:
install-data-am:
install-exec-am:
install-info: install-info-am
install-man:
installcheck-am:
maintainer-clean: maintainer-clean-am
-rm -rf ./$(DEPDIR)
-rm -f Makefile
maintainer-clean-am: distclean-am maintainer-clean-generic
mostlyclean: mostlyclean-am
mostlyclean-am: mostlyclean-compile mostlyclean-generic
pdf: pdf-am
pdf-am:
ps: ps-am
ps-am:
uninstall-am: uninstall-info-am
.PHONY: CTAGS GTAGS all all-am check check-am clean clean-generic \
clean-noinstPROGRAMS ctags distclean distclean-compile \
distclean-generic distclean-tags distdir dvi dvi-am html \
html-am info info-am install install-am install-data \
install-data-am install-exec install-exec-am install-info \
install-info-am install-man install-strip installcheck \
installcheck-am installdirs maintainer-clean \
maintainer-clean-generic mostlyclean mostlyclean-compile \
mostlyclean-generic pdf pdf-am ps ps-am tags uninstall \
uninstall-am uninstall-info-am
# Tell versions [3.59,3.63) of GNU make to not export all variables.
# Otherwise a system limit (for SysV at least) may be exceeded.
.NOEXPORT:

View File

@ -1,294 +0,0 @@
#!/bin/sh
#
# install - install a program, script, or datafile
#
# This originates from X11R5 (mit/util/scripts/install.sh), which was
# later released in X11R6 (xc/config/util/install.sh) with the
# following copyright and license.
#
# Copyright (C) 1994 X Consortium
#
# Permission is hereby granted, free of charge, to any person obtaining a copy
# of this software and associated documentation files (the "Software"), to
# deal in the Software without restriction, including without limitation the
# rights to use, copy, modify, merge, publish, distribute, sublicense, and/or
# sell copies of the Software, and to permit persons to whom the Software is
# furnished to do so, subject to the following conditions:
#
# The above copyright notice and this permission notice shall be included in
# all copies or substantial portions of the Software.
#
# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
# FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
# X CONSORTIUM BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN
# AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNEC-
# TION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
#
# Except as contained in this notice, the name of the X Consortium shall not
# be used in advertising or otherwise to promote the sale, use or other deal-
# ings in this Software without prior written authorization from the X Consor-
# tium.
#
#
# FSF changes to this file are in the public domain.
#
# Calling this script install-sh is preferred over install.sh, to prevent
# `make' implicit rules from creating a file called install from it
# when there is no Makefile.
#
# This script is compatible with the BSD install script, but was written
# from scratch. It can only install one file at a time, a restriction
# shared with many OS's install programs.
# set DOITPROG to echo to test this script
# Don't use :- since 4.3BSD and earlier shells don't like it.
doit="${DOITPROG-}"
# put in absolute paths if you don't have them in your path; or use env. vars.
mvprog="${MVPROG-mv}"
cpprog="${CPPROG-cp}"
chmodprog="${CHMODPROG-chmod}"
chownprog="${CHOWNPROG-chown}"
chgrpprog="${CHGRPPROG-chgrp}"
stripprog="${STRIPPROG-strip}"
rmprog="${RMPROG-rm}"
mkdirprog="${MKDIRPROG-mkdir}"
transformbasename=""
transform_arg=""
instcmd="$mvprog"
chmodcmd="$chmodprog 0755"
chowncmd=""
chgrpcmd=""
stripcmd=""
rmcmd="$rmprog -f"
mvcmd="$mvprog"
src=""
dst=""
dir_arg=""
while [ x"$1" != x ]; do
case $1 in
-c) instcmd=$cpprog
shift
continue;;
-d) dir_arg=true
shift
continue;;
-m) chmodcmd="$chmodprog $2"
shift
shift
continue;;
-o) chowncmd="$chownprog $2"
shift
shift
continue;;
-g) chgrpcmd="$chgrpprog $2"
shift
shift
continue;;
-s) stripcmd=$stripprog
shift
continue;;
-t=*) transformarg=`echo $1 | sed 's/-t=//'`
shift
continue;;
-b=*) transformbasename=`echo $1 | sed 's/-b=//'`
shift
continue;;
*) if [ x"$src" = x ]
then
src=$1
else
# this colon is to work around a 386BSD /bin/sh bug
:
dst=$1
fi
shift
continue;;
esac
done
if [ x"$src" = x ]
then
echo "$0: no input file specified" >&2
exit 1
else
:
fi
if [ x"$dir_arg" != x ]; then
dst=$src
src=""
if [ -d "$dst" ]; then
instcmd=:
chmodcmd=""
else
instcmd=$mkdirprog
fi
else
# Waiting for this to be detected by the "$instcmd $src $dsttmp" command
# might cause directories to be created, which would be especially bad
# if $src (and thus $dsttmp) contains '*'.
if [ -f "$src" ] || [ -d "$src" ]
then
:
else
echo "$0: $src does not exist" >&2
exit 1
fi
if [ x"$dst" = x ]
then
echo "$0: no destination specified" >&2
exit 1
else
:
fi
# If destination is a directory, append the input filename; if your system
# does not like double slashes in filenames, you may need to add some logic
if [ -d "$dst" ]
then
dst=$dst/`basename "$src"`
else
:
fi
fi
## this sed command emulates the dirname command
dstdir=`echo "$dst" | sed -e 's,[^/]*$,,;s,/$,,;s,^$,.,'`
# Make sure that the destination directory exists.
# this part is taken from Noah Friedman's mkinstalldirs script
# Skip lots of stat calls in the usual case.
if [ ! -d "$dstdir" ]; then
defaultIFS='
'
IFS="${IFS-$defaultIFS}"
oIFS=$IFS
# Some sh's can't handle IFS=/ for some reason.
IFS='%'
set - `echo "$dstdir" | sed -e 's@/@%@g' -e 's@^%@/@'`
IFS=$oIFS
pathcomp=''
while [ $# -ne 0 ] ; do
pathcomp=$pathcomp$1
shift
if [ ! -d "$pathcomp" ] ;
then
$mkdirprog "$pathcomp"
else
:
fi
pathcomp=$pathcomp/
done
fi
if [ x"$dir_arg" != x ]
then
$doit $instcmd "$dst" &&
if [ x"$chowncmd" != x ]; then $doit $chowncmd "$dst"; else : ; fi &&
if [ x"$chgrpcmd" != x ]; then $doit $chgrpcmd "$dst"; else : ; fi &&
if [ x"$stripcmd" != x ]; then $doit $stripcmd "$dst"; else : ; fi &&
if [ x"$chmodcmd" != x ]; then $doit $chmodcmd "$dst"; else : ; fi
else
# If we're going to rename the final executable, determine the name now.
if [ x"$transformarg" = x ]
then
dstfile=`basename "$dst"`
else
dstfile=`basename "$dst" $transformbasename |
sed $transformarg`$transformbasename
fi
# don't allow the sed command to completely eliminate the filename
if [ x"$dstfile" = x ]
then
dstfile=`basename "$dst"`
else
:
fi
# Make a couple of temp file names in the proper directory.
dsttmp=$dstdir/_inst.$$_
rmtmp=$dstdir/_rm.$$_
# Trap to clean up temp files at exit.
trap 'status=$?; rm -f "$dsttmp" "$rmtmp" && exit $status' 0
trap '(exit $?); exit' 1 2 13 15
# Move or copy the file name to the temp name
$doit $instcmd "$src" "$dsttmp" &&
# and set any options; do chmod last to preserve setuid bits
# If any of these fail, we abort the whole thing. If we want to
# ignore errors from any of these, just make sure not to ignore
# errors from the above "$doit $instcmd $src $dsttmp" command.
if [ x"$chowncmd" != x ]; then $doit $chowncmd "$dsttmp"; else :;fi &&
if [ x"$chgrpcmd" != x ]; then $doit $chgrpcmd "$dsttmp"; else :;fi &&
if [ x"$stripcmd" != x ]; then $doit $stripcmd "$dsttmp"; else :;fi &&
if [ x"$chmodcmd" != x ]; then $doit $chmodcmd "$dsttmp"; else :;fi &&
# Now remove or move aside any old file at destination location. We try this
# two ways since rm can't unlink itself on some systems and the destination
# file might be busy for other reasons. In this case, the final cleanup
# might fail but the new file should still install successfully.
{
if [ -f "$dstdir/$dstfile" ]
then
$doit $rmcmd -f "$dstdir/$dstfile" 2>/dev/null ||
$doit $mvcmd -f "$dstdir/$dstfile" "$rmtmp" 2>/dev/null ||
{
echo "$0: cannot unlink or rename $dstdir/$dstfile" >&2
(exit 1); exit
}
else
:
fi
} &&
# Now rename the file to the real destination.
$doit $mvcmd "$dsttmp" "$dstdir/$dstfile"
fi &&
# The final little trick to "correctly" pass the exit status to the exit trap.
{
(exit 0); exit
}

336
missing
View File

@ -1,336 +0,0 @@
#! /bin/sh
# Common stub for a few missing GNU programs while installing.
# Copyright (C) 1996, 1997, 1999, 2000, 2002, 2003 Free Software Foundation, Inc.
# Originally by Fran,cois Pinard <pinard@iro.umontreal.ca>, 1996.
# This program is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation; either version 2, or (at your option)
# any later version.
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
# You should have received a copy of the GNU General Public License
# along with this program; if not, write to the Free Software
# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
# 02111-1307, USA.
# As a special exception to the GNU General Public License, if you
# distribute this file as part of a program that contains a
# configuration script generated by Autoconf, you may include it under
# the same distribution terms that you use for the rest of that program.
if test $# -eq 0; then
echo 1>&2 "Try \`$0 --help' for more information"
exit 1
fi
run=:
# In the cases where this matters, `missing' is being run in the
# srcdir already.
if test -f configure.ac; then
configure_ac=configure.ac
else
configure_ac=configure.in
fi
case "$1" in
--run)
# Try to run requested program, and just exit if it succeeds.
run=
shift
"$@" && exit 0
;;
esac
# If it does not exist, or fails to run (possibly an outdated version),
# try to emulate it.
case "$1" in
-h|--h|--he|--hel|--help)
echo "\
$0 [OPTION]... PROGRAM [ARGUMENT]...
Handle \`PROGRAM [ARGUMENT]...' for when PROGRAM is missing, or return an
error status if there is no known handling for PROGRAM.
Options:
-h, --help display this help and exit
-v, --version output version information and exit
--run try to run the given command, and emulate it if it fails
Supported PROGRAM values:
aclocal touch file \`aclocal.m4'
autoconf touch file \`configure'
autoheader touch file \`config.h.in'
automake touch all \`Makefile.in' files
bison create \`y.tab.[ch]', if possible, from existing .[ch]
flex create \`lex.yy.c', if possible, from existing .c
help2man touch the output file
lex create \`lex.yy.c', if possible, from existing .c
makeinfo touch the output file
tar try tar, gnutar, gtar, then tar without non-portable flags
yacc create \`y.tab.[ch]', if possible, from existing .[ch]"
;;
-v|--v|--ve|--ver|--vers|--versi|--versio|--version)
echo "missing 0.4 - GNU automake"
;;
-*)
echo 1>&2 "$0: Unknown \`$1' option"
echo 1>&2 "Try \`$0 --help' for more information"
exit 1
;;
aclocal*)
if test -z "$run" && ($1 --version) > /dev/null 2>&1; then
# We have it, but it failed.
exit 1
fi
echo 1>&2 "\
WARNING: \`$1' is missing on your system. You should only need it if
you modified \`acinclude.m4' or \`${configure_ac}'. You might want
to install the \`Automake' and \`Perl' packages. Grab them from
any GNU archive site."
touch aclocal.m4
;;
autoconf)
if test -z "$run" && ($1 --version) > /dev/null 2>&1; then
# We have it, but it failed.
exit 1
fi
echo 1>&2 "\
WARNING: \`$1' is missing on your system. You should only need it if
you modified \`${configure_ac}'. You might want to install the
\`Autoconf' and \`GNU m4' packages. Grab them from any GNU
archive site."
touch configure
;;
autoheader)
if test -z "$run" && ($1 --version) > /dev/null 2>&1; then
# We have it, but it failed.
exit 1
fi
echo 1>&2 "\
WARNING: \`$1' is missing on your system. You should only need it if
you modified \`acconfig.h' or \`${configure_ac}'. You might want
to install the \`Autoconf' and \`GNU m4' packages. Grab them
from any GNU archive site."
files=`sed -n 's/^[ ]*A[CM]_CONFIG_HEADER(\([^)]*\)).*/\1/p' ${configure_ac}`
test -z "$files" && files="config.h"
touch_files=
for f in $files; do
case "$f" in
*:*) touch_files="$touch_files "`echo "$f" |
sed -e 's/^[^:]*://' -e 's/:.*//'`;;
*) touch_files="$touch_files $f.in";;
esac
done
touch $touch_files
;;
automake*)
if test -z "$run" && ($1 --version) > /dev/null 2>&1; then
# We have it, but it failed.
exit 1
fi
echo 1>&2 "\
WARNING: \`$1' is missing on your system. You should only need it if
you modified \`Makefile.am', \`acinclude.m4' or \`${configure_ac}'.
You might want to install the \`Automake' and \`Perl' packages.
Grab them from any GNU archive site."
find . -type f -name Makefile.am -print |
sed 's/\.am$/.in/' |
while read f; do touch "$f"; done
;;
autom4te)
if test -z "$run" && ($1 --version) > /dev/null 2>&1; then
# We have it, but it failed.
exit 1
fi
echo 1>&2 "\
WARNING: \`$1' is needed, and you do not seem to have it handy on your
system. You might have modified some files without having the
proper tools for further handling them.
You can get \`$1' as part of \`Autoconf' from any GNU
archive site."
file=`echo "$*" | sed -n 's/.*--output[ =]*\([^ ]*\).*/\1/p'`
test -z "$file" && file=`echo "$*" | sed -n 's/.*-o[ ]*\([^ ]*\).*/\1/p'`
if test -f "$file"; then
touch $file
else
test -z "$file" || exec >$file
echo "#! /bin/sh"
echo "# Created by GNU Automake missing as a replacement of"
echo "# $ $@"
echo "exit 0"
chmod +x $file
exit 1
fi
;;
bison|yacc)
echo 1>&2 "\
WARNING: \`$1' is missing on your system. You should only need it if
you modified a \`.y' file. You may need the \`Bison' package
in order for those modifications to take effect. You can get
\`Bison' from any GNU archive site."
rm -f y.tab.c y.tab.h
if [ $# -ne 1 ]; then
eval LASTARG="\${$#}"
case "$LASTARG" in
*.y)
SRCFILE=`echo "$LASTARG" | sed 's/y$/c/'`
if [ -f "$SRCFILE" ]; then
cp "$SRCFILE" y.tab.c
fi
SRCFILE=`echo "$LASTARG" | sed 's/y$/h/'`
if [ -f "$SRCFILE" ]; then
cp "$SRCFILE" y.tab.h
fi
;;
esac
fi
if [ ! -f y.tab.h ]; then
echo >y.tab.h
fi
if [ ! -f y.tab.c ]; then
echo 'main() { return 0; }' >y.tab.c
fi
;;
lex|flex)
echo 1>&2 "\
WARNING: \`$1' is missing on your system. You should only need it if
you modified a \`.l' file. You may need the \`Flex' package
in order for those modifications to take effect. You can get
\`Flex' from any GNU archive site."
rm -f lex.yy.c
if [ $# -ne 1 ]; then
eval LASTARG="\${$#}"
case "$LASTARG" in
*.l)
SRCFILE=`echo "$LASTARG" | sed 's/l$/c/'`
if [ -f "$SRCFILE" ]; then
cp "$SRCFILE" lex.yy.c
fi
;;
esac
fi
if [ ! -f lex.yy.c ]; then
echo 'main() { return 0; }' >lex.yy.c
fi
;;
help2man)
if test -z "$run" && ($1 --version) > /dev/null 2>&1; then
# We have it, but it failed.
exit 1
fi
echo 1>&2 "\
WARNING: \`$1' is missing on your system. You should only need it if
you modified a dependency of a manual page. You may need the
\`Help2man' package in order for those modifications to take
effect. You can get \`Help2man' from any GNU archive site."
file=`echo "$*" | sed -n 's/.*-o \([^ ]*\).*/\1/p'`
if test -z "$file"; then
file=`echo "$*" | sed -n 's/.*--output=\([^ ]*\).*/\1/p'`
fi
if [ -f "$file" ]; then
touch $file
else
test -z "$file" || exec >$file
echo ".ab help2man is required to generate this page"
exit 1
fi
;;
makeinfo)
if test -z "$run" && (makeinfo --version) > /dev/null 2>&1; then
# We have makeinfo, but it failed.
exit 1
fi
echo 1>&2 "\
WARNING: \`$1' is missing on your system. You should only need it if
you modified a \`.texi' or \`.texinfo' file, or any other file
indirectly affecting the aspect of the manual. The spurious
call might also be the consequence of using a buggy \`make' (AIX,
DU, IRIX). You might want to install the \`Texinfo' package or
the \`GNU make' package. Grab either from any GNU archive site."
file=`echo "$*" | sed -n 's/.*-o \([^ ]*\).*/\1/p'`
if test -z "$file"; then
file=`echo "$*" | sed 's/.* \([^ ]*\) *$/\1/'`
file=`sed -n '/^@setfilename/ { s/.* \([^ ]*\) *$/\1/; p; q; }' $file`
fi
touch $file
;;
tar)
shift
if test -n "$run"; then
echo 1>&2 "ERROR: \`tar' requires --run"
exit 1
fi
# We have already tried tar in the generic part.
# Look for gnutar/gtar before invocation to avoid ugly error
# messages.
if (gnutar --version > /dev/null 2>&1); then
gnutar "$@" && exit 0
fi
if (gtar --version > /dev/null 2>&1); then
gtar "$@" && exit 0
fi
firstarg="$1"
if shift; then
case "$firstarg" in
*o*)
firstarg=`echo "$firstarg" | sed s/o//`
tar "$firstarg" "$@" && exit 0
;;
esac
case "$firstarg" in
*h*)
firstarg=`echo "$firstarg" | sed s/h//`
tar "$firstarg" "$@" && exit 0
;;
esac
fi
echo 1>&2 "\
WARNING: I can't seem to be able to run \`tar' with the given arguments.
You may want to install GNU tar or Free paxutils, or check the
command line arguments."
exit 1
;;
*)
echo 1>&2 "\
WARNING: \`$1' is needed, and you do not seem to have it handy on your
system. You might have modified some files without having the
proper tools for further handling them. Check the \`README' file,
it often tells you about the needed prerequisites for installing
this package. You may also peek at any GNU archive site, in case
some other package would contain this missing \`$1' program."
exit 1
;;
esac
exit 0

View File

@ -1,111 +0,0 @@
#! /bin/sh
# mkinstalldirs --- make directory hierarchy
# Author: Noah Friedman <friedman@prep.ai.mit.edu>
# Created: 1993-05-16
# Public domain
errstatus=0
dirmode=""
usage="\
Usage: mkinstalldirs [-h] [--help] [-m mode] dir ..."
# process command line arguments
while test $# -gt 0 ; do
case $1 in
-h | --help | --h*) # -h for help
echo "$usage" 1>&2
exit 0
;;
-m) # -m PERM arg
shift
test $# -eq 0 && { echo "$usage" 1>&2; exit 1; }
dirmode=$1
shift
;;
--) # stop option processing
shift
break
;;
-*) # unknown option
echo "$usage" 1>&2
exit 1
;;
*) # first non-opt arg
break
;;
esac
done
for file
do
if test -d "$file"; then
shift
else
break
fi
done
case $# in
0) exit 0 ;;
esac
case $dirmode in
'')
if mkdir -p -- . 2>/dev/null; then
echo "mkdir -p -- $*"
exec mkdir -p -- "$@"
fi
;;
*)
if mkdir -m "$dirmode" -p -- . 2>/dev/null; then
echo "mkdir -m $dirmode -p -- $*"
exec mkdir -m "$dirmode" -p -- "$@"
fi
;;
esac
for file
do
set fnord `echo ":$file" | sed -ne 's/^:\//#/;s/^://;s/\// /g;s/^#/\//;p'`
shift
pathcomp=
for d
do
pathcomp="$pathcomp$d"
case $pathcomp in
-*) pathcomp=./$pathcomp ;;
esac
if test ! -d "$pathcomp"; then
echo "mkdir $pathcomp"
mkdir "$pathcomp" || lasterr=$?
if test ! -d "$pathcomp"; then
errstatus=$lasterr
else
if test ! -z "$dirmode"; then
echo "chmod $dirmode $pathcomp"
lasterr=""
chmod "$dirmode" "$pathcomp" || lasterr=$?
if test ! -z "$lasterr"; then
errstatus=$lasterr
fi
fi
fi
fi
pathcomp="$pathcomp/"
done
done
exit $errstatus
# Local Variables:
# mode: shell-script
# sh-indentation: 2
# End:
# mkinstalldirs ends here

View File

@ -1,497 +0,0 @@
# Makefile.in generated by automake 1.9.2 from Makefile.am.
# @configure_input@
# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
# 2003, 2004 Free Software Foundation, Inc.
# This Makefile.in is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
# PARTICULAR PURPOSE.
@SET_MAKE@
SOURCES = $(libcfu_a_SOURCES) libcfu-config.c
srcdir = @srcdir@
top_srcdir = @top_srcdir@
VPATH = @srcdir@
pkgdatadir = $(datadir)/@PACKAGE@
pkglibdir = $(libdir)/@PACKAGE@
pkgincludedir = $(includedir)/@PACKAGE@
top_builddir = ..
am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
INSTALL = @INSTALL@
install_sh_DATA = $(install_sh) -c -m 644
install_sh_PROGRAM = $(install_sh) -c
install_sh_SCRIPT = $(install_sh) -c
INSTALL_HEADER = $(INSTALL_DATA)
transform = $(program_transform_name)
NORMAL_INSTALL = :
PRE_INSTALL = :
POST_INSTALL = :
NORMAL_UNINSTALL = :
PRE_UNINSTALL = :
POST_UNINSTALL = :
bin_PROGRAMS = libcfu-config$(EXEEXT)
subdir = src
DIST_COMMON = $(include_HEADERS) $(srcdir)/Makefile.am \
$(srcdir)/Makefile.in TODO
ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
am__aclocal_m4_deps = $(top_srcdir)/acinclude.m4 \
$(top_srcdir)/configure.ac
am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
$(ACLOCAL_M4)
mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs
CONFIG_CLEAN_FILES =
am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
am__vpath_adj = case $$p in \
$(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
*) f=$$p;; \
esac;
am__strip_dir = `echo $$p | sed -e 's|^.*/||'`;
am__installdirs = "$(DESTDIR)$(libdir)" "$(DESTDIR)$(bindir)" \
"$(DESTDIR)$(includedir)"
libLIBRARIES_INSTALL = $(INSTALL_DATA)
LIBRARIES = $(lib_LIBRARIES)
AR = ar
ARFLAGS = cru
libcfu_a_AR = $(AR) $(ARFLAGS)
libcfu_a_LIBADD =
am_libcfu_a_OBJECTS = cfuhash.$(OBJEXT) cfutime.$(OBJEXT) \
cfustring.$(OBJEXT) cfulist.$(OBJEXT) cfuconf.$(OBJEXT) \
cfuthread_queue.$(OBJEXT) cfu.$(OBJEXT) cfuopt.$(OBJEXT)
libcfu_a_OBJECTS = $(am_libcfu_a_OBJECTS)
binPROGRAMS_INSTALL = $(INSTALL_PROGRAM)
PROGRAMS = $(bin_PROGRAMS)
libcfu_config_SOURCES = libcfu-config.c
libcfu_config_OBJECTS = libcfu-config.$(OBJEXT)
libcfu_config_LDADD = $(LDADD)
DEFAULT_INCLUDES = -I. -I$(srcdir)
depcomp = $(SHELL) $(top_srcdir)/depcomp
am__depfiles_maybe = depfiles
COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \
$(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
CCLD = $(CC)
LINK = $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(AM_LDFLAGS) $(LDFLAGS) -o $@
SOURCES = $(libcfu_a_SOURCES) libcfu-config.c
DIST_SOURCES = $(libcfu_a_SOURCES) libcfu-config.c
includeHEADERS_INSTALL = $(INSTALL_HEADER)
HEADERS = $(include_HEADERS)
ETAGS = etags
CTAGS = ctags
DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
ACLOCAL = @ACLOCAL@
AMDEP_FALSE = @AMDEP_FALSE@
AMDEP_TRUE = @AMDEP_TRUE@
AMTAR = @AMTAR@
AUTOCONF = @AUTOCONF@
AUTOHEADER = @AUTOHEADER@
AUTOMAKE = @AUTOMAKE@
AWK = @AWK@
CC = @CC@
CCDEPMODE = @CCDEPMODE@
CFLAGS = @CFLAGS@
CPP = @CPP@
CPPFLAGS = @CPPFLAGS@
CYGPATH_W = @CYGPATH_W@
DEBUG_FALSE = @DEBUG_FALSE@
DEBUG_TRUE = @DEBUG_TRUE@
DEFS = @DEFS@
DEPDIR = @DEPDIR@
ECHO_C = @ECHO_C@
ECHO_N = @ECHO_N@
ECHO_T = @ECHO_T@
EGREP = @EGREP@
EXEEXT = @EXEEXT@
INSTALL_DATA = @INSTALL_DATA@
INSTALL_PROGRAM = @INSTALL_PROGRAM@
INSTALL_SCRIPT = @INSTALL_SCRIPT@
INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
LDFLAGS = @LDFLAGS@
LIBCFU_TYPE_u_int = @LIBCFU_TYPE_u_int@
LIBOBJS = @LIBOBJS@
LIBS = @LIBS@
LTLIBOBJS = @LTLIBOBJS@
MAKEINFO = @MAKEINFO@
OBJEXT = @OBJEXT@
PACKAGE = @PACKAGE@
PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
PACKAGE_NAME = @PACKAGE_NAME@
PACKAGE_STRING = @PACKAGE_STRING@
PACKAGE_TARNAME = @PACKAGE_TARNAME@
PACKAGE_VERSION = @PACKAGE_VERSION@
PATH_SEPARATOR = @PATH_SEPARATOR@
RANLIB = @RANLIB@
SET_MAKE = @SET_MAKE@
SHELL = @SHELL@
STRIP = @STRIP@
VERSION = @VERSION@
ac_ct_CC = @ac_ct_CC@
ac_ct_RANLIB = @ac_ct_RANLIB@
ac_ct_STRIP = @ac_ct_STRIP@
am__fastdepCC_FALSE = @am__fastdepCC_FALSE@
am__fastdepCC_TRUE = @am__fastdepCC_TRUE@
am__include = @am__include@
am__leading_dot = @am__leading_dot@
am__quote = @am__quote@
am__tar = @am__tar@
am__untar = @am__untar@
bindir = @bindir@
build_alias = @build_alias@
datadir = @datadir@
exec_prefix = @exec_prefix@
host_alias = @host_alias@
includedir = @includedir@
infodir = @infodir@
install_sh = @install_sh@
libdir = @libdir@
libexecdir = @libexecdir@
localstatedir = @localstatedir@
mandir = @mandir@
mkdir_p = @mkdir_p@
oldincludedir = @oldincludedir@
prefix = @prefix@
program_transform_name = @program_transform_name@
sbindir = @sbindir@
sharedstatedir = @sharedstatedir@
sysconfdir = @sysconfdir@
target_alias = @target_alias@
lib_LIBRARIES = libcfu.a
libcfu_a_SOURCES = cfuhash.c cfutime.c cfustring.c cfulist.c cfuconf.c cfuthread_queue.c cfu.c cfuopt.c
CFU_CONFIG_DEFINES = -DCFU_LIBDIR="\"@libdir@\"" -DCFU_LIBS="\"@LIBS@\"" -DCFU_INCLUDEDIR="\"@includedir@\"" -DCFU_PREFIX="\"@prefix@\"" -DCFU_EXEC_PREFIX="\"@exec_prefix@\""
@DEBUG_FALSE@AM_CFLAGS = -Wall -W $(CFU_CONFIG_DEFINES)
@DEBUG_TRUE@AM_CFLAGS = -Wall -W -DCFU_DEBUG=1 $(CFU_CONFIG_DEFINES)
include_HEADERS = $(top_srcdir)/include/cfu.h $(top_srcdir)/include/cfuhash.h \
$(top_srcdir)/include/cfutime.h $(top_srcdir)/include/cfustring.h \
$(top_srcdir)/include/cfulist.h $(top_srcdir)/include/cfuconf.h \
$(top_srcdir)/include/cfuthread_queue.h $(top_srcdir)/include/cfutypes.h \
$(top_srcdir)/include/cfuopt.h
# libcfu_a_LDFLAGS = -lpthread
INCLUDES = -I$(top_srcdir)/include
all: all-am
.SUFFIXES:
.SUFFIXES: .c .o .obj
$(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(am__configure_deps)
@for dep in $?; do \
case '$(am__configure_deps)' in \
*$$dep*) \
cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh \
&& exit 0; \
exit 1;; \
esac; \
done; \
echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu src/Makefile'; \
cd $(top_srcdir) && \
$(AUTOMAKE) --gnu src/Makefile
.PRECIOUS: Makefile
Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
@case '$?' in \
*config.status*) \
cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
*) \
echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
esac;
$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
$(top_srcdir)/configure: $(am__configure_deps)
cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
$(ACLOCAL_M4): $(am__aclocal_m4_deps)
cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
install-libLIBRARIES: $(lib_LIBRARIES)
@$(NORMAL_INSTALL)
test -z "$(libdir)" || $(mkdir_p) "$(DESTDIR)$(libdir)"
@list='$(lib_LIBRARIES)'; for p in $$list; do \
if test -f $$p; then \
f=$(am__strip_dir) \
echo " $(libLIBRARIES_INSTALL) '$$p' '$(DESTDIR)$(libdir)/$$f'"; \
$(libLIBRARIES_INSTALL) "$$p" "$(DESTDIR)$(libdir)/$$f"; \
else :; fi; \
done
@$(POST_INSTALL)
@list='$(lib_LIBRARIES)'; for p in $$list; do \
if test -f $$p; then \
p=$(am__strip_dir) \
echo " $(RANLIB) '$(DESTDIR)$(libdir)/$$p'"; \
$(RANLIB) "$(DESTDIR)$(libdir)/$$p"; \
else :; fi; \
done
uninstall-libLIBRARIES:
@$(NORMAL_UNINSTALL)
@list='$(lib_LIBRARIES)'; for p in $$list; do \
p=$(am__strip_dir) \
echo " rm -f '$(DESTDIR)$(libdir)/$$p'"; \
rm -f "$(DESTDIR)$(libdir)/$$p"; \
done
clean-libLIBRARIES:
-test -z "$(lib_LIBRARIES)" || rm -f $(lib_LIBRARIES)
libcfu.a: $(libcfu_a_OBJECTS) $(libcfu_a_DEPENDENCIES)
-rm -f libcfu.a
$(libcfu_a_AR) libcfu.a $(libcfu_a_OBJECTS) $(libcfu_a_LIBADD)
$(RANLIB) libcfu.a
install-binPROGRAMS: $(bin_PROGRAMS)
@$(NORMAL_INSTALL)
test -z "$(bindir)" || $(mkdir_p) "$(DESTDIR)$(bindir)"
@list='$(bin_PROGRAMS)'; for p in $$list; do \
p1=`echo $$p|sed 's/$(EXEEXT)$$//'`; \
if test -f $$p \
; then \
f=`echo "$$p1" | sed 's,^.*/,,;$(transform);s/$$/$(EXEEXT)/'`; \
echo " $(INSTALL_PROGRAM_ENV) $(binPROGRAMS_INSTALL) '$$p' '$(DESTDIR)$(bindir)/$$f'"; \
$(INSTALL_PROGRAM_ENV) $(binPROGRAMS_INSTALL) "$$p" "$(DESTDIR)$(bindir)/$$f" || exit 1; \
else :; fi; \
done
uninstall-binPROGRAMS:
@$(NORMAL_UNINSTALL)
@list='$(bin_PROGRAMS)'; for p in $$list; do \
f=`echo "$$p" | sed 's,^.*/,,;s/$(EXEEXT)$$//;$(transform);s/$$/$(EXEEXT)/'`; \
echo " rm -f '$(DESTDIR)$(bindir)/$$f'"; \
rm -f "$(DESTDIR)$(bindir)/$$f"; \
done
clean-binPROGRAMS:
-test -z "$(bin_PROGRAMS)" || rm -f $(bin_PROGRAMS)
mostlyclean-compile:
-rm -f *.$(OBJEXT)
distclean-compile:
-rm -f *.tab.c
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/cfu.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/cfuconf.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/cfuhash.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/cfulist.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/cfuopt.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/cfustring.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/cfuthread_queue.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/cfutime.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/libcfu-config.Po@am__quote@
.c.o:
@am__fastdepCC_TRUE@ if $(COMPILE) -MT $@ -MD -MP -MF "$(DEPDIR)/$*.Tpo" -c -o $@ $<; \
@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/$*.Tpo" "$(DEPDIR)/$*.Po"; else rm -f "$(DEPDIR)/$*.Tpo"; exit 1; fi
@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
@am__fastdepCC_FALSE@ $(COMPILE) -c $<
.c.obj:
@am__fastdepCC_TRUE@ if $(COMPILE) -MT $@ -MD -MP -MF "$(DEPDIR)/$*.Tpo" -c -o $@ `$(CYGPATH_W) '$<'`; \
@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/$*.Tpo" "$(DEPDIR)/$*.Po"; else rm -f "$(DEPDIR)/$*.Tpo"; exit 1; fi
@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
@am__fastdepCC_FALSE@ $(COMPILE) -c `$(CYGPATH_W) '$<'`
uninstall-info-am:
install-includeHEADERS: $(include_HEADERS)
@$(NORMAL_INSTALL)
test -z "$(includedir)" || $(mkdir_p) "$(DESTDIR)$(includedir)"
@list='$(include_HEADERS)'; for p in $$list; do \
if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
f=$(am__strip_dir) \
echo " $(includeHEADERS_INSTALL) '$$d$$p' '$(DESTDIR)$(includedir)/$$f'"; \
$(includeHEADERS_INSTALL) "$$d$$p" "$(DESTDIR)$(includedir)/$$f"; \
done
uninstall-includeHEADERS:
@$(NORMAL_UNINSTALL)
@list='$(include_HEADERS)'; for p in $$list; do \
f=$(am__strip_dir) \
echo " rm -f '$(DESTDIR)$(includedir)/$$f'"; \
rm -f "$(DESTDIR)$(includedir)/$$f"; \
done
ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
unique=`for i in $$list; do \
if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
done | \
$(AWK) ' { files[$$0] = 1; } \
END { for (i in files) print i; }'`; \
mkid -fID $$unique
tags: TAGS
TAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \
$(TAGS_FILES) $(LISP)
tags=; \
here=`pwd`; \
list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
unique=`for i in $$list; do \
if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
done | \
$(AWK) ' { files[$$0] = 1; } \
END { for (i in files) print i; }'`; \
if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \
test -n "$$unique" || unique=$$empty_fix; \
$(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
$$tags $$unique; \
fi
ctags: CTAGS
CTAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \
$(TAGS_FILES) $(LISP)
tags=; \
here=`pwd`; \
list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
unique=`for i in $$list; do \
if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
done | \
$(AWK) ' { files[$$0] = 1; } \
END { for (i in files) print i; }'`; \
test -z "$(CTAGS_ARGS)$$tags$$unique" \
|| $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
$$tags $$unique
GTAGS:
here=`$(am__cd) $(top_builddir) && pwd` \
&& cd $(top_srcdir) \
&& gtags -i $(GTAGS_ARGS) $$here
distclean-tags:
-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
distdir: $(DISTFILES)
$(mkdir_p) $(distdir)/../include
@srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \
topsrcdirstrip=`echo "$(top_srcdir)" | sed 's|.|.|g'`; \
list='$(DISTFILES)'; for file in $$list; do \
case $$file in \
$(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \
$(top_srcdir)/*) file=`echo "$$file" | sed "s|^$$topsrcdirstrip/|$(top_builddir)/|"`;; \
esac; \
if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \
if test "$$dir" != "$$file" && test "$$dir" != "."; then \
dir="/$$dir"; \
$(mkdir_p) "$(distdir)$$dir"; \
else \
dir=''; \
fi; \
if test -d $$d/$$file; then \
if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
fi; \
cp -pR $$d/$$file $(distdir)$$dir || exit 1; \
else \
test -f $(distdir)/$$file \
|| cp -p $$d/$$file $(distdir)/$$file \
|| exit 1; \
fi; \
done
check-am: all-am
check: check-am
all-am: Makefile $(LIBRARIES) $(PROGRAMS) $(HEADERS)
installdirs:
for dir in "$(DESTDIR)$(libdir)" "$(DESTDIR)$(bindir)" "$(DESTDIR)$(includedir)"; do \
test -z "$$dir" || $(mkdir_p) "$$dir"; \
done
install: install-am
install-exec: install-exec-am
install-data: install-data-am
uninstall: uninstall-am
install-am: all-am
@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
installcheck: installcheck-am
install-strip:
$(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
`test -z '$(STRIP)' || \
echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
mostlyclean-generic:
clean-generic:
distclean-generic:
-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
maintainer-clean-generic:
@echo "This command is intended for maintainers to use"
@echo "it deletes files that may require special tools to rebuild."
clean: clean-am
clean-am: clean-binPROGRAMS clean-generic clean-libLIBRARIES \
mostlyclean-am
distclean: distclean-am
-rm -rf ./$(DEPDIR)
-rm -f Makefile
distclean-am: clean-am distclean-compile distclean-generic \
distclean-tags
dvi: dvi-am
dvi-am:
html: html-am
info: info-am
info-am:
install-data-am: install-includeHEADERS
install-exec-am: install-binPROGRAMS install-libLIBRARIES
install-info: install-info-am
install-man:
installcheck-am:
maintainer-clean: maintainer-clean-am
-rm -rf ./$(DEPDIR)
-rm -f Makefile
maintainer-clean-am: distclean-am maintainer-clean-generic
mostlyclean: mostlyclean-am
mostlyclean-am: mostlyclean-compile mostlyclean-generic
pdf: pdf-am
pdf-am:
ps: ps-am
ps-am:
uninstall-am: uninstall-binPROGRAMS uninstall-includeHEADERS \
uninstall-info-am uninstall-libLIBRARIES
.PHONY: CTAGS GTAGS all all-am check check-am clean clean-binPROGRAMS \
clean-generic clean-libLIBRARIES ctags distclean \
distclean-compile distclean-generic distclean-tags distdir dvi \
dvi-am html html-am info info-am install install-am \
install-binPROGRAMS install-data install-data-am install-exec \
install-exec-am install-includeHEADERS install-info \
install-info-am install-libLIBRARIES install-man install-strip \
installcheck installcheck-am installdirs maintainer-clean \
maintainer-clean-generic mostlyclean mostlyclean-compile \
mostlyclean-generic pdf pdf-am ps ps-am tags uninstall \
uninstall-am uninstall-binPROGRAMS uninstall-includeHEADERS \
uninstall-info-am uninstall-libLIBRARIES
default: libcfu.a libcfu-config
libcfu-config.o: libcfu-config.c
libcfu-config: libcfu.a libcfu-config.o
$(CC) $(CFLAGS) -o libcfu-config libcfu-config.o libcfu.a -pthread
# Tell versions [3.59,3.63) of GNU make to not export all variables.
# Otherwise a system limit (for SysV at least) may be exceeded.
.NOEXPORT:

View File

@ -1,4 +0,0 @@
* command line option parsing