systems/lauv-atom/patches/linux: change version for 4.9.

Authored By: Ricardo Martins

.gitignore

@@ -11,3 +11,4 @@
 /ntnu-b2xx
 /stamp9g20
 /lctr-rpi
+/lauv-atom

architectures/arm-1176.cfg

@@ -2,5 +2,5 @@ cfg_target_canonical="armv11-$cfg_glued_vendor-linux-gnueabi"
 cfg_target_linux='arm'
 cfg_target_uboot_arch='arm'
 cfg_target_gcc_flags='-O2 -pipe -funit-at-a-time -mcpu=arm1176jzf-s -mtune=arm1176jzf-s -mfloat-abi=softfp -mfpu=vfpv3'
-cfg_target_gcc_configure_flags='--with-arch=armv7-a --with-cpu=arm1176jzf-s --with-tune=arm1176jzf-s --with-fpu=vfpv3 --with-float=softfp'
+cfg_target_gcc_configure_flags='--with-arch=armv7-a --with-mcpu=arm1176jzf-s --with-mtune=arm1176jzf-s --with-fpu=vfpv3 --with-float=softfp'
 cfg_target_ar_flags='elf32-littlearm'

architectures/arm926ej-s.cfg

@@ -1,4 +1,4 @@
 cfg_target_canonical="armv5te-$cfg_glued_vendor-linux-gnueabi"
 cfg_target_linux='arm'
 cfg_target_gcc_flags='-O2 -pipe -funit-at-a-time -mtune=arm926ej-s -mfloat-abi=soft'
-cfg_target_gcc_configure_flags='--with-arch=armv5te --with-tune=arm926ej-s --with-float=soft'
+cfg_target_gcc_configure_flags='--with-arch=armv5te --with-mtune=arm926ej-s --with-float=soft'

architectures/atom.cfg

@@ -1,4 +1,4 @@
 cfg_target_canonical="atom-$cfg_glued_vendor-linux-gnu"
 cfg_target_linux='x86'
 cfg_target_linux_kernel='arch/x86/boot/bzImage'
-cfg_target_gcc_configure_flags='--with-arch=atom --with-cpu=atom --with-tune=atom'
+cfg_target_gcc_configure_flags='--with-arch=atom --with-mcpu=atom --with-mtune=atom'

architectures/atom64.cfg

@@ -1,6 +1,6 @@
 cfg_target_canonical="atom64-$cfg_glued_vendor-linux-gnu"
 cfg_target_linux='x86'
 cfg_target_gcc_flags='-O2 -pipe -march=atom -funit-at-a-time'
-cfg_target_gcc_configure_flags='--with-cpu=x86-64 --with-tune=atom'
+cfg_target_gcc_configure_flags='--with-mcpu=x86-64 --with-mtune=atom'
 cfg_target_linux_kernel='arch/x86/boot/bzImage'
 cfg_target_lib64='yes'

architectures/cortex-a8-hardfp.cfg

@@ -2,5 +2,5 @@ cfg_target_canonical="armv7-$cfg_glued_vendor-linux-gnueabihf"
 cfg_target_linux='arm'
 cfg_target_uboot_arch='arm'
 cfg_target_gcc_flags='-O2 -pipe -funit-at-a-time -mcpu=cortex-a8 -mtune=cortex-a8 -mfloat-abi=hard -mfpu=vfpv3'
-cfg_target_gcc_configure_flags='--with-arch=armv7-a --with-cpu=cortex-a8 --with-tune=cortex-a8 --with-fpu=vfpv3 --with-float=hard'
+cfg_target_gcc_configure_flags='--with-arch=armv7-a --with-mcpu=cortex-a8 --with-mtune=cortex-a8 --with-fpu=vfpv3 --with-float=hard'
 cfg_target_ar_flags='elf32-littlearm'

architectures/cortex-a8.cfg

@@ -2,5 +2,5 @@ cfg_target_canonical="armv7-$cfg_glued_vendor-linux-gnueabi"
 cfg_target_linux='arm'
 cfg_target_uboot_arch='arm'
 cfg_target_gcc_flags='-O2 -pipe -funit-at-a-time -mcpu=cortex-a8 -mtune=cortex-a8 -mfloat-abi=softfp -mfpu=vfpv3'
-cfg_target_gcc_configure_flags='--with-arch=armv7-a --with-cpu=cortex-a8 --with-tune=cortex-a8 --with-fpu=vfpv3 --with-float=softfp'
+cfg_target_gcc_configure_flags='--with-arch=armv7-a --with-mcpu=cortex-a8 --with-mtune=cortex-a8 --with-fpu=vfpv3 --with-float=softfp'
 cfg_target_ar_flags='elf32-littlearm'

architectures/cortex-a9-hardfp.cfg

@@ -2,5 +2,5 @@ cfg_target_canonical="armv7-$cfg_glued_vendor-linux-gnueabihf"
 cfg_target_linux='arm'
 cfg_target_uboot_arch='arm'
 cfg_target_gcc_flags='-O2 -pipe -funit-at-a-time -mcpu=cortex-a9 -mtune=cortex-a9 -mfloat-abi=hard -mfpu=vfpv3'
-cfg_target_gcc_configure_flags='--with-arch=armv7-a --with-cpu=cortex-a9 --with-tune=cortex-a9 --with-fpu=vfpv3 --with-float=hard'
+cfg_target_gcc_configure_flags='--with-arch=armv7-a --with-mcpu=cortex-a9 --with-mtune=cortex-a9 --with-fpu=vfpv3 --with-float=hard'
 cfg_target_ar_flags='elf32-littlearm'

architectures/geode.cfg

@@ -1,3 +1,3 @@
 cfg_target_canonical="geode-$cfg_glued_vendor-linux-gnu"
 cfg_target_linux='x86'
-cfg_target_gcc_configure_flags='--with-arch=geode --with-cpu=geode --with-tune=geode'
+cfg_target_gcc_configure_flags='--with-arch=geode --with-mcpu=geode --with-mtune=geode'

architectures/i586.cfg

@@ -1,5 +1,5 @@
 cfg_target_canonical="i586-$cfg_glued_vendor-linux-gnu"
 cfg_target_linux='x86'
-cfg_target_gcc_configure_flags='--with-arch=i586 --with-cpu=i586 --with-tune=i586'
+cfg_target_gcc_configure_flags='--with-arch=i586 --with-mcpu=i586 --with-mtune=i586'
 cfg_target_gcc_flags='-O2 -pipe -march=i586 -funit-at-a-time'
 cfg_target_glibc_configure_flags='--with-cpu=i586'

architectures/i686.cfg

@@ -1,6 +1,6 @@
 cfg_target_canonical="i686-$cfg_glued_vendor-linux-gnu"
 cfg_target_linux='x86'
 cfg_target_gcc_flags='-O2 -pipe -march=i686 -funit-at-a-time'
-cfg_target_gcc_configure_flags='--with-cpu=i686'
-cfg_target_glibc_configure_flags='--with-cpu=i686'
+cfg_target_gcc_configure_flags='--mwith-cpu=i686'
+cfg_target_glibc_configure_flags='--with-mcpu=i686'
 cfg_target_linux_kernel='arch/x86/boot/bzImage'

architectures/mips32r2.cfg

@@ -1,5 +1,5 @@
 cfg_target_canonical="mipsisa32r2-$cfg_glued_vendor-linux-gnu"
 cfg_target_linux='mips'
 cfg_target_gcc_flags='-O2 -pipe -funit-at-a-time -mabi=32 -mips32r2 -mtune=mips32r2 -msoft-float'
-cfg_target_gcc_configure_flags='--with-abi=32 --with-tune=mips32r2 --with-float=soft'
+cfg_target_gcc_configure_flags='--with-abi=32 --with-mtune=mips32r2 --with-float=soft'
 cfg_target_glibc_configure_flags='--without-fp'

architectures/xscale-iwmmxt.cfg

@@ -1,4 +1,4 @@
 cfg_target_canonical="armv5-$cfg_glued_vendor-linux-gnueabi"
 cfg_target_linux='arm'
 cfg_target_gcc_flags='-O2 -pipe -funit-at-a-time -mcpu=iwmmxt -mtune=iwmmxt -mfloat-abi=soft'
-cfg_target_gcc_configure_flags='--with-arch=iwmmxt --with-cpu=iwmmxt --with-tune=iwmmxt --with-float=soft'
+cfg_target_gcc_configure_flags='--with-arch=iwmmxt --with-mcpu=iwmmxt --with-mtune=iwmmxt --with-float=soft'

architectures/xscale.cfg

@@ -1,4 +1,4 @@
 cfg_target_canonical="armv5-$cfg_glued_vendor-linux-gnueabi"
 cfg_target_linux='arm'
 cfg_target_gcc_flags='-O2 -pipe -funit-at-a-time -mtune=xscale -mfloat-abi=soft'
-cfg_target_gcc_configure_flags='--with-arch=armv5te --with-tune=xscale --with-float=soft'
+cfg_target_gcc_configure_flags='--with-arch=armv5te --with-mtune=xscale --with-float=soft'

docker/Dockerfile

@@ -20,18 +20,31 @@
 # Author: Ricardo Martins                                                 #
 ###########################################################################
 
-FROM debian:8
+FROM debian:9
 
 MAINTAINER Ricardo Martins <rasm@oceanscan-mst.com>
+MAINTAINER Pedro Gonçalves <pedro@lsts.pt>
 
 ENV DEBIAN_FRONTEND noninteractive
 
 # Update distro.
+RUN echo "deb http://ftp.us.debian.org/debian testing non-free contrib" >> /etc/apt/sources.list
+RUN apt-get update
+RUN apt-get install -y gnupg2
+RUN apt-key adv --recv-keys --keyserver keyserver.ubuntu.com 40976EAF437D05B5
+RUN apt-get install -y apt-utils
+RUN apt-get install -y gpgv
 RUN apt-get update -y
+RUN apt-get install -y apt-utils
 RUN apt-get dist-upgrade -y
+RUN apt-get install -y bash-completion
 RUN apt-get install -y wget
 RUN apt-get install -y bzip2
 RUN apt-get install -y git
 RUN apt-get install -y g++-multilib
-RUN apt-get install -y cmake
 RUN apt-get install -y file
+RUN apt-get install -y kmod
+RUN apt-get install -y vim
+RUN apt-get install -y nasm
+RUN apt-get install -y build-essential
+RUN apt-get install -y make

docker/Makefile

@@ -21,11 +21,24 @@
 ###########################################################################
 
 TAG     := glued
-VERSION := 2016.05.0
+VERSION := 2020.07.24
 VOLUME  := $(CURDIR)/..
+DNS     := 8.8.8.8
 
 all:
 	docker build -t $(TAG):$(VERSION) .
 
 shell:
-	docker run -w $(VOLUME) -i -a stdin -a stdout -v $(VOLUME):$(VOLUME) -t $(TAG):$(VERSION)
+	docker run -w $(VOLUME) --dns=$(DNS) -i -a stdin -a stdout -v $(VOLUME):$(VOLUME) -t $(TAG):$(VERSION)
+
+clean:
+	@echo "* Stopping docker service..."
+	@sudo systemctl stop docker
+	@echo "* Cleaning docker service..."
+	@sudo rm -rf /var/lib/docker
+	@echo "* Starting docker service..."
+	@sudo systemctl start docker
+	@echo "* Done."
+
+delete_img:
+	@sudo docker system prune -a

mkconfig.bash

@@ -23,7 +23,7 @@
 ###########################################################################
 
 # Config: GLUED version.
-cfg_glued_version='2016.05'
+cfg_glued_version='2020.07'
 # Config: GLUED vendor.
 cfg_glued_vendor='lsts'
 

mkpackage.bash

@@ -72,7 +72,7 @@ download()
         fi
 
        # First try LSTS mirror.
-	lsts_url="http://lsts.pt/glued/$(basename $u)"
+	      lsts_url="https://www.lsts.pt/glued/validPackages/$(basename $u)"
               download_tool "$lsts_url" "$cfg_dir_downloads/$file"
               if [ $? -ne 0 ]; then
 	          # Then try OceanScan-MST mirror.

rules/binutils/cross.bash

@@ -1,6 +1,6 @@
 version=\
 (
-    '2.25.1'
+    '2.25'
 )
 
 url=\
@@ -10,7 +10,7 @@ url=\
 
 md5=\
 (
-    'ac493a78de4fee895961d025b7905be4'
+    'd9f3303f802a5b6b0bb73a335ab89d66'
 )
 
 maintainer=\

rules/bzip2/common.bash

@@ -5,7 +5,7 @@ version=\
 
 url=\
 (
-    "http://bzip.org/1.0.6/bzip2-$version.tar.gz"
+    "https://sourceforge.net/projects/bzip2/files/bzip2-$version.tar.gz"
 )
 
 md5=\

rules/elfutils/default.bash

@@ -0,0 +1,42 @@
+version=\
+(
+    '0.180'
+)
+
+url=\
+(
+    "ftp://sourceware.org/pub/elfutils/$version/elfutils-$version.tar.bz2"
+)
+
+md5=\
+(
+    '23feddb1b3859b03ffdbaf53ba6bd09b'
+)
+
+requires=\
+(
+    'zlib/host'
+    'zlib/default'
+)
+
+configure()
+{
+    MAKEINFO='/bin/true' \
+    "./configure" --disable-debuginfod \
+        --build="$cfg_host_canonical" \
+        --target="$cmd_target_prefix" \
+        --host="$cfg_host_canonical" \
+        --prefix="$cfg_dir_toolchain" \
+        CC="$cmd_target_cc" \
+        CXX="$cmd_target_cxx"
+}
+
+build()
+{
+    $cmd_make
+}
+
+host_install()
+{
+    $cmd_make install
+}

rules/gcc/common.bash

@@ -1,16 +1,16 @@
 version=\
 (
-    '4.9.3'
+    '9.3.0'
 )
 
 url=\
 (
-    "http://mirrors.kernel.org/gnu/gcc/gcc-$version/gcc-$version.tar.bz2"
+    "http://mirrors.kernel.org/gnu/gcc/gcc-$version/gcc-$version.tar.gz"
 )
 
 md5=\
 (
-    '6f831b4d251872736e8e9cc09746f327'
+    '9b7e8f6cfad96114e726c752935af58a'
 )
 
 build_dir=$pkg_var

rules/gcc/cross.bash

@@ -49,10 +49,15 @@ host_install()
 
 target_install()
 {
-    $cmd_mkdir \
-        "$cfg_dir_rootfs/usr/lib" &&
+    libdir=lib
+    if [ -d "$cfg_dir_toolchain/$cfg_target_canonical/lib64" ]; then
+        libdir=lib64
+    fi
 
-    for f in "$cfg_dir_toolchain/$cfg_target_canonical/lib/"{libgcc_s,libstdc++}.so*; do
+    $cmd_mkdir \
+        "$cfg_dir_rootfs/usr/$libdir" &&
+
+    for f in "$cfg_dir_toolchain/$cfg_target_canonical/$libdir/"{libgcc_s,libstdc++}.so*; do
         base="$(basename $f)"
 
         if [ $(echo "$base" | grep '\.py' 2> /dev/null) ]; then

rules/gdb/common.bash

@@ -1,6 +1,6 @@
 version=\
 (
-    '7.8.2'
+    '7.10.1'
 )
 
 url=\
@@ -10,5 +10,5 @@ url=\
 
 md5=\
 (
-    'a80cf252ed2e775d4e4533341bbf2459'
+    '39e654460c9cdd80200a29ac020cfe11'
 )

rules/glibc/common.bash

@@ -1,6 +1,6 @@
 version=\
 (
-    '2.22'
+    '2.26'
 )
 
 url=\
@@ -10,7 +10,7 @@ url=\
 
 md5=\
 (
-    'e51e02bf552a0a1fbbdc948fb2f5e83c'
+    '102f637c3812f81111f48f2427611be1'
 )
 
 maintainer=\

rules/gmp/host.bash

@@ -1,6 +1,6 @@
 version=\
 (
-    '5.0.4'
+    '6.1.2'
 )
 
 url=\
@@ -10,7 +10,7 @@ url=\
 
 md5=\
 (
-    '50c3edcb7c9438e04377ee9a1a061b79'
+    '8ddbb26dc3bd4e2302984debba1406a5'
 )
 
 maintainer=\

rules/htop/default.bash

@@ -1,6 +1,6 @@
 version=\
 (
-    '2.0.2'
+    '2.2.0'
 )
 
 url=\
@@ -10,7 +10,7 @@ url=\
 
 md5=\
 (
-    '7d354d904bad591a931ad57e99fea84a'
+    '0d816b6beed31edc75babcfbf863ffa8'
 )
 
 maintainer=\
@@ -18,6 +18,11 @@ maintainer=\
     'Jose Pinto <zepinto@lsts.pt>'
 )
 
+requires=\
+(
+    'ncurses/default'
+)
+
 build()
 {
     $cmd_make
@@ -26,7 +31,15 @@ build()
 configure()
 {
     cd "../htop-$version"
-    ./configure --disable-unicode --prefix="${cfg_dir_rootfs}"
+    ./configure --disable-unicode \
+    --disable-dependency-tracking \
+    --build="$cfg_host_canonical" \
+    --host="$cfg_host_canonical" \
+    --prefix="$cfg_dir_rootfs" \
+    HTOP_NCURSESW_CONFIG_SCRIPT="$cfg_dir_toolchain_sysroot/usr/bin/ncursesw6-config" \
+    HTOP_NCURSES_CONFIG_SCRIPT="$cfg_dir_toolchain_sysroot/usr/bin/ncurses6-config" \
+    CC="$cmd_target_cc" \
+    CXX="$cmd_target_cxx"
 }
 
 target_install()

rules/libdc1394/default.bash

@@ -19,6 +19,7 @@ configure()
         --prefix="$cfg_dir_toolchain_sysroot/usr" \
         --target="$cfg_target_canonical" \
         --host="$cfg_target_canonical" \
+        --disable-examples \
         --build="$cfg_host_canonical"
 }
 

rules/linux-headers/cross.bash

@@ -1,6 +1,6 @@
 version=\
 (
-    '4.4.66'
+    '4.9.99'
 )
 
 url=\
@@ -10,7 +10,7 @@ url=\
 
 md5=\
 (
-    '5353de56bf4621a35afc4384c7e51f30'
+    'aecc1118040df0c18dbca9f1f163ef84'
 )
 
 maintainer=\

rules/linux/default.bash

@@ -1,6 +1,6 @@
 version=\
 (
-    '4.4.66'
+    '4.9.99'
 )
 
 url=\
@@ -10,7 +10,7 @@ url=\
 
 md5=\
 (
-    '5353de56bf4621a35afc4384c7e51f30'
+    'aecc1118040df0c18dbca9f1f163ef84'
 )
 
 maintainer=\
@@ -23,6 +23,7 @@ requires=\
     'bc/host'
     'kmod/host'
     'lz4/host'
+#    'elfutils/default'
 )
 
 # This variable is updated by find_patches().
@@ -128,14 +129,12 @@ build()
     $cmd_make \
         CROSS_COMPILE=$cfg_target_canonical- \
         ARCH=$cfg_target_linux \
-        DEPMOD="$cfg_dir_toolchain/sbin/depmod" \
         modules || return 1
 
     if [ "$(basename $cfg_target_linux_kernel)" = 'uImage' ]; then
         $cmd_make \
             CROSS_COMPILE=$cfg_target_canonical- \
             ARCH=$cfg_target_linux \
-            DEPMOD="$cfg_dir_toolchain/sbin/depmod" \
             uImage || return 1
     fi
 
@@ -144,7 +143,6 @@ build()
         $cmd_make \
             CROSS_COMPILE=$cfg_target_canonical- \
             ARCH=$cfg_target_linux \
-            DEPMOD="$cfg_dir_toolchain/sbin/depmod" \
             zImage || return 1
     fi
 
@@ -153,7 +151,6 @@ build()
         $cmd_make \
             CROSS_COMPILE=$cfg_target_canonical- \
             ARCH=$cfg_target_linux \
-            DEPMOD="$cfg_dir_toolchain/sbin/depmod" \
             dtbs || return 1
     fi
 
@@ -198,7 +195,6 @@ target_install()
         ARCH="$cfg_target_linux" \
         INSTALL_MOD_PATH="$cfg_dir_rootfs/usr" \
         KBUILD_VERBOSE=1 \
-        DEPMOD="$cfg_dir_toolchain/sbin/depmod" \
         modules_install
 
     $cmd_make \
@@ -206,6 +202,5 @@ target_install()
         ARCH="$cfg_target_linux" \
         INSTALL_MOD_PATH="$cfg_dir_rootfs/usr" \
         KBUILD_VERBOSE=1 \
-        DEPMOD="$cfg_dir_toolchain/sbin/depmod" \
         firmware_install
 }

rules/linux/v3_14.bash

@@ -129,14 +129,12 @@ build()
     $cmd_make \
         CROSS_COMPILE=$cfg_target_canonical- \
         ARCH=$cfg_target_linux \
-        DEPMOD="$cfg_dir_toolchain/sbin/depmod" \
         modules || return 1
 
     if [ "$(basename $cfg_target_linux_kernel)" = 'uImage' ]; then
         $cmd_make \
             CROSS_COMPILE=$cfg_target_canonical- \
             ARCH=$cfg_target_linux \
-            DEPMOD="$cfg_dir_toolchain/sbin/depmod" \
             uImage || return 1
     fi
 
@@ -145,7 +143,6 @@ build()
         $cmd_make \
             CROSS_COMPILE=$cfg_target_canonical- \
             ARCH=$cfg_target_linux \
-            DEPMOD="$cfg_dir_toolchain/sbin/depmod" \
             zImage || return 1
     fi
 
@@ -154,7 +151,6 @@ build()
         $cmd_make \
             CROSS_COMPILE=$cfg_target_canonical- \
             ARCH=$cfg_target_linux \
-            DEPMOD="$cfg_dir_toolchain/sbin/depmod" \
             dtbs || return 1
     fi
 
@@ -199,7 +195,6 @@ target_install()
         ARCH="$cfg_target_linux" \
         INSTALL_MOD_PATH="$cfg_dir_rootfs/usr" \
         KBUILD_VERBOSE=1 \
-        DEPMOD="$cfg_dir_toolchain/sbin/depmod" \
         modules_install
 
     $cmd_make \
@@ -207,6 +202,5 @@ target_install()
         ARCH="$cfg_target_linux" \
         INSTALL_MOD_PATH="$cfg_dir_rootfs/usr" \
         KBUILD_VERBOSE=1 \
-        DEPMOD="$cfg_dir_toolchain/sbin/depmod" \
         firmware_install
 }

rules/lpg/default.bash

@@ -10,7 +10,13 @@ url=\
 
 md5=\
 (
-    "beb0f3b8be474868b074dca66ced5b48"
+    "d71e2f282372a5cb1021d9e457a3d53f"
+)
+
+requires=\
+(
+    'bison/host'
+    'flex/host'
 )
 
 configure()
@@ -20,7 +26,10 @@ configure()
 
 build()
 {
-    $cmd_make
+    $cmd_make \
+	BISON="$cfg_dir_toolchain/bin/bison" \
+	FLEX="$cfg_dir_toolchain/bin/flex"
+    
 }
 
 target_install()

rules/memtest86+/default.bash

@@ -0,0 +1,32 @@
+version=\
+(
+    "5.01"
+)
+
+url=\
+(
+    "http://www.lsts.pt/glued/memtest86+-$version.tar.gz"
+)
+
+md5=\
+(
+    "035b85f2edabc9b4a6b0cf6c9c3acf50"
+)
+
+maintainer=\
+(
+    'Tiago Sá Marques <tsmarques@fe.up.pt>'
+)
+
+build()
+{
+    $cmd_make \
+        CC=$cmd_target_cc \
+        CXX=$cmd_target_cxx
+}
+
+target_install()
+{
+    $cmd_cp ./memtest.bin $cfg_dir_rootfs/boot/
+    tar -C "$pkg_dir/fs" --exclude .svn -c -f - . | tar -C "$cfg_dir_rootfs" -x -v -f -
+}

rules/memtest86+/fs/usr/bin/start-memtest

@@ -0,0 +1,14 @@
+#! /bin/sh
+
+echo "Starting memtest in 10 seconds (requires reboot), Ctrl-C to cancel..."
+for r in 0 1 2 3 4 5 6 7 8 9; do
+    printf "."
+    sleep 1
+done
+
+mount -o remount,rw /
+extlinux -o "memtest" /boot/extlinux/
+mount -o remount,ro /
+
+echo "* Rebooting now"
+reboot

rules/mpc/host.bash

@@ -1,16 +1,16 @@
 version=\
 (
-    "0.9"
+    "1.0.2"
 )
 
 url=\
 (
-    "http://www.multiprecision.org/mpc/download/mpc-$version.tar.gz"
+    "https://ftp.gnu.org/gnu/mpc/mpc-$version.tar.gz"
 )
 
 md5=\
 (
-    "0d6acab8d214bd7d1fbbc593e83dd00d"
+    "68fadff3358fb3e7976c7a398a0af4c3"
 )
 
 maintainer=\

rules/mpfr/host.bash

@@ -1,6 +1,6 @@
 version=\
 (
-    '3.1.3'
+    '3.1.5'
 )
 
 url=\
@@ -10,7 +10,7 @@ url=\
 
 md5=\
 (
-    '5fdfa3cfa5c86514ee4a241a1affa138'
+    'b1d23a55588e3b2a13e3be66bc69fd8d'
 )
 
 maintainer=\

rules/ncurses/common.bash

@@ -1,6 +1,6 @@
 version=\
 (
-    "5.9"
+    "6.2"
 )
 
 url=\
@@ -10,7 +10,7 @@ url=\
 
 md5=\
 (
-    "8cb9c412e5f2d96bc6f459aa8c6282a1"
+    "e812da327b1c2214ac1aed440ea3ae8d"
 )
 
 maintainer=\

rules/ncurses/default.bash

@@ -10,7 +10,10 @@ configure_common()
         --target="$cfg_target_canonical" \
         --host="$cfg_target_canonical" \
         --build="$cfg_host_canonical" \
+        --with-build-cc="$cmd_target_cc" \
+        --with-build-cpp="$cmd_target_cpp" \
 	--with-shared \
+  --enable-ext-colors \
 	--enable-pc-files \
 	--without-progs \
 	--without-tests \

rules/ntp/default.bash

@@ -5,7 +5,7 @@ version=\
 
 url=\
 (
-    "ftp://gentoo.mirrors.ovh.net/gentoo-distfiles/distfiles/ntp-$version.tar.gz"
+    "ftp://mirror.ovh.net/gentoo-distfiles/distfiles/ntp-$version.tar.gz"
 )
 
 md5=\

rules/openssh/default.bash

@@ -30,6 +30,7 @@ configure()
         --target="$cfg_target_canonical" \
         --host="$cfg_target_canonical" \
         --build="$cfg_host_canonical" \
+        --with-privsep-path=$cfg_dir_rootfs/var/empty \
         --disable-strip
         
 }

rules/pciutils/default.bash

@@ -5,7 +5,7 @@ version=\
 
 url=\
 (
-    "ftp://atrey.karlin.mff.cuni.cz/pub/linux/pci/pciutils-$version.tar.gz"
+    "http://ftp.riken.jp/Linux/kernel.org/software/utils/pciutils/pciutils-$version.tar.gz"
 )
 
 md5=\

rules/perf/default.bash

@@ -0,0 +1,46 @@
+version=\
+(
+    "3.19"
+)
+
+url=\
+(
+       "https://www.kernel.org/pub/linux/kernel/v3.x/linux-$version.tar.xz"
+)
+
+requires=\
+(
+    'flex/host'
+    'bison/host'
+    'zlib/default'
+)
+
+# v3.19
+md5=\
+(
+       'd3fc8316d4d4d04b65cbc2d70799e763'
+)
+
+#3.14.63
+# md5=('6cf8a6b23849f47f511e0e46cfdb6392')
+
+build()
+{
+    
+    cd ../linux-$version/
+    $cmd_make \
+	CROSS_COMPILE="$cfg_target_canonical-" \
+	ARCH="$cfg_target_linux" \
+	INSTALL_MOD_PATH="$cfg_dir_rootfs/usr" \
+	KBUILD_VERBOSE=1 \
+	DEPMOD="$cfg_dir_toolchain/sbin/depmod" \
+	NO_LIBELF=1 \
+	LDFLAGS=-static \
+	-C "./tools/perf/"
+}
+
+target_install()
+{
+    $cmd_cp ../linux-$version/tools/perf/perf \
+	    $cfg_dir_rootfs/usr/bin/
+}

rules/rsync/default.bash

@@ -5,12 +5,12 @@ version=\
 
 url=\
 (
-    "http://www.samba.org/ftp/rsync/rsync-$version.tar.gz"
+    "https://github.com/WayneD/rsync/archive/v$version.tar.gz"
 )
 
 md5=\
 (
-    '43bd6676f0b404326eee2d63be3cdcfe'
+    'e559dd27216db757f4b34d64b8bf789e'
 )
 
 maintainer=\

rules/syslinux/common.bash

@@ -1,16 +1,16 @@
 version=\
 (
-    '3.82'
+    '6.04'
 )
 
 url=\
 (
-    "https://www.kernel.org/pub/linux/utils/boot/syslinux/3.xx/syslinux-$version.tar.bz2"
+    "https://mirrors.edge.kernel.org/pub/linux/utils/boot/syslinux/Testing/$version/syslinux-$version-pre1.tar.gz"
 )
 
 md5=\
 (
-    'c9f4e73e385c86b3a8faf9b615a04836'
+    'fefbc39becb619339fc22c91ec7112ab'
 )
 
 maintainer=\
@@ -22,4 +22,11 @@ requires=\
 (
     'nasm/host'
     'python_host/host'
+    'uuid/default'
 )
+
+post_unpack()
+{
+  cd ..
+  $cmd_cp syslinux-$version-pre1/* syslinux-$version/
+}

rules/syslinux/default.bash

@@ -2,9 +2,9 @@ source $pkg_common
 
 host_install()
 {
-    $cmd_make clean &&
-    $cmd_make &&
-    cp -d extlinux/extlinux ${cfg_dir_toolchain}/bin/extlinux
+    $cmd_make_single clean &&
+    $cmd_make_single CC="$cmd_target_cc" &&
+    cp -d bios/extlinux/extlinux ${cfg_dir_toolchain}/bin/extlinux
 }
 
 target_install()
@@ -19,11 +19,11 @@ target_install()
         export cfg_kernel_boot_dev='/dev/sda1'
     fi
 
-    $cmd_make clean &&
-    $cmd_make CC="$cmd_target_cc" &&
-    $cmd_target_strip extlinux/extlinux -o $cfg_dir_rootfs/usr/sbin/extlinux &&
+    $cmd_make_single clean &&
+    $cmd_make_single CC="$cmd_target_cc" &&
+    $cmd_target_strip bios/extlinux/extlinux -o $cfg_dir_rootfs/usr/sbin/extlinux &&
     $cmd_mkdir $cfg_dir_rootfs/boot/extlinux &&
-    cp -d mbr/mbr.bin $cfg_dir_rootfs/boot/extlinux &&
+    cp -d bios/mbr/mbr.bin $cfg_dir_rootfs/boot/extlinux &&
     (echo $console ; cat "$pkg_dir"/extlinux.conf) \
          | sed "s%\$cfg_kernel_extra_args%$cfg_kernel_extra_args%g" \
          | sed "s%\$cfg_kernel_boot_dev%$cfg_kernel_boot_dev%g" \

rules/syslinux/extlinux.conf

@@ -1,3 +1,6 @@
 LABEL linux
    KERNEL /boot/kernel
    APPEND rootwait root=$cfg_kernel_boot_dev rootfstype=ext2 ro $cfg_kernel_extra_args
+
+LABEL memtest
+   LINUX /boot/memtest.bin

rules/syslinux/host.bash

@@ -2,9 +2,9 @@ source $pkg_common
 
 host_install()
 {
-    $cmd_make clean &&
-    $cmd_make &&
-    cp -d extlinux/extlinux ${cfg_dir_toolchain}/bin &&
+    $cmd_make_single clean &&
+    $cmd_make_single CC="$cmd_target_cc" &&
+    cp -d bios/extlinux/extlinux ${cfg_dir_toolchain}/bin &&
     mkdir -p ${cfg_dir_toolchain}/boot &&
-    cp -d mbr/mbr.bin ${cfg_dir_toolchain}/boot/mbr.bin
+    cp -d bios/mbr/mbr.bin ${cfg_dir_toolchain}/boot/mbr.bin
 }

rules/uuid/default.bash

@@ -0,0 +1,10 @@
+maintainer=\
+(
+    'Pedro Gonçalves <pedro@lsts.pt>'
+)
+
+host_install()
+{
+  cp -rv $cfg_dir_toolchain/include/uuid $cfg_dir_toolchain_sysroot/usr/include/
+  $cmd_cp $cfg_dir_toolchain/lib/libuuid* $cfg_dir_toolchain_sysroot/usr/lib/
+}

systems/lauv-atom/aries-atom-testbed.cfg

@@ -0,0 +1,2 @@
+cfg_hostname='aries-atom-testbed'
+cfg_eth_ext_ip='10.0.200.66'

systems/lauv-atom/lauv-atom-testbed.cfg

@@ -1,2 +0,0 @@
-cfg_hostname='lauv-atom-testbed'
-cfg_eth_ext_ip='10.0.200.92'

systems/lauv-atom/patches/linux/4.9/00-aim104-com8.patch

@@ -0,0 +1,85 @@
+diff -Nru a/drivers/tty/serial/8250/8250_aim104_com8.c b/drivers/tty/serial/8250/8250_aim104_com8.c
+--- a/drivers/tty/serial/8250/8250_aim104_com8.c	1970-01-01 01:00:00.000000000 +0100
++++ b/drivers/tty/serial/8250/8250_aim104_com8.c	2012-05-31 13:13:13.794585528 +0100
+@@ -0,0 +1,51 @@
++#include <linux/module.h>
++#include <linux/init.h>
++#include <linux/serial_8250.h>
++
++#define PORT(_base,_irq)				\
++	{						\
++		.iobase		= _base,		\
++		.irq		= _irq,			\
++		.uartclk	= 1843200,		\
++		.iotype		= UPIO_PORT,		\
++		.flags		= UPF_BOOT_AUTOCONF | UPF_BUGGY_UART,	\
++	}
++
++static struct plat_serial8250_port aim104_data[] = {
++	PORT(0x100, 10),
++	PORT(0x108, 10),
++	PORT(0x110, 10),
++	PORT(0x118, 10),
++	PORT(0x120, 10),
++	PORT(0x128, 10),
++	PORT(0x130, 10),
++	PORT(0x138, 10),
++	PORT(0x300, 6),
++	PORT(0x308, 6),
++	PORT(0x310, 6),
++	PORT(0x318, 6),
++	PORT(0x320, 6),
++	PORT(0x328, 6),
++	PORT(0x330, 6),
++	PORT(0x338, 6),
++	{ },
++};
++
++static struct platform_device exar_device = {
++	.name			= "serial8250",
++	.id			= PLAT8250_DEV_PLATFORM,
++	.dev			= {
++		.platform_data	= aim104_data,
++	},
++};
++
++static int __init exar_init(void)
++{
++	return platform_device_register(&exar_device);
++}
++
++module_init(exar_init);
++
++MODULE_AUTHOR("Ricardo Martins");
++MODULE_DESCRIPTION("8250 serial probe module for Eurotech AIM104-COM8");
++MODULE_LICENSE("GPL");
+diff -Nru a/drivers/tty/serial/8250/Kconfig b/drivers/tty/serial/8250/Kconfig
+--- a/drivers/tty/serial/8250/Kconfig	2012-05-21 19:42:51.000000000 +0100
++++ b/drivers/tty/serial/8250/Kconfig	2012-05-31 13:14:45.942587436 +0100
+@@ -202,6 +202,15 @@
+ 	  To compile this driver as a module, choose M here: the module
+ 	  will be called 8250_exar_st16c554.
+
++config SERIAL_8250_AIM104_COM8
++	tristate "Support Eurotech AIM104-COM8 Dual Quad UART"
++	depends on SERIAL_8250 != n && ISA && SERIAL_8250_MANY_PORTS
++	help
++	  Eurotech AIM104-COM8 Dual Quad UART.
++
++	  To compile this driver as a module, choose M here: the module
++	  will be called 8250_aim104_com8.
++
+ config SERIAL_8250_HUB6
+ 	tristate "Support Hub6 cards"
+ 	depends on SERIAL_8250 != n && ISA && SERIAL_8250_MANY_PORTS
+diff -Nru a/drivers/tty/serial/8250/Makefile b/drivers/tty/serial/8250/Makefile
+--- a/drivers/tty/serial/8250/Makefile	2012-05-21 19:42:51.000000000 +0100
++++ b/drivers/tty/serial/8250/Makefile	2012-05-31 13:15:15.366347016 +0100
+@@ -14,6 +14,7 @@
+ obj-$(CONFIG_SERIAL_8250_ACCENT)	+= 8250_accent.o
+ obj-$(CONFIG_SERIAL_8250_BOCA)		+= 8250_boca.o
+ obj-$(CONFIG_SERIAL_8250_EXAR_ST16C554)	+= 8250_exar_st16c554.o
++obj-$(CONFIG_SERIAL_8250_AIM104_COM8)	+= 8250_aim104_com8.o
+ obj-$(CONFIG_SERIAL_8250_HUB6)		+= 8250_hub6.o
+ obj-$(CONFIG_SERIAL_8250_MCA)		+= 8250_mca.o
+ obj-$(CONFIG_SERIAL_8250_FSL)		+= 8250_fsl.o

systems/lauv-aux-rpi/lauv-xplore-3-aux.cfg

@@ -0,0 +1,10 @@
+cfg_hostname='lauv-xplore-3-aux'
+cfg_eth_ext_ip='10.0.10.143'
+cfg_eth_ext_mk='255.255.0.0'
+cfg_eth_ext_gw='10.0.0.1'
+cfg_ptpd_interface='eth0'
+cfg_services0='network dropbear storage upgrade syslog ptpd'
+cfg_services1=''
+cfg_services2='trex'
+cfg_packages='dropbear rsync busybox e2fsprogs dosfstools ptpd rpcbind nfs-utils rpi-boot-firmware linux/rpi libantlr3c boost europa'
+

systems/lauv-aux-rpi/lauv-xplore-4-aux.cfg

@@ -0,0 +1,10 @@
+cfg_hostname='lauv-xplore-4-aux'
+cfg_eth_ext_ip='10.0.10.153'
+cfg_eth_ext_mk='255.255.0.0'
+cfg_eth_ext_gw='10.0.0.1'
+cfg_ptpd_interface='eth0'
+cfg_services0='network dropbear storage upgrade syslog ptpd'
+cfg_services1=''
+cfg_services2='trex'
+cfg_packages='dropbear rsync busybox e2fsprogs dosfstools ptpd rpcbind nfs-utils rpi-boot-firmware linux/rpi libantlr3c boost europa'
+

systems/lauv-aux-rpi/lauv-xplore-5-aux.cfg

@@ -0,0 +1,10 @@
+cfg_hostname='lauv-xplore-5-aux'
+cfg_eth_ext_ip='10.0.10.163'
+cfg_eth_ext_mk='255.255.0.0'
+cfg_eth_ext_gw='10.0.0.1'
+cfg_ptpd_interface='eth0'
+cfg_services0='network dropbear storage upgrade syslog ptpd'
+cfg_services1=''
+cfg_services2='trex'
+cfg_packages='dropbear rsync busybox e2fsprogs dosfstools ptpd rpcbind nfs-utils rpi-boot-firmware linux/rpi libantlr3c boost europa'
+

systems/lctr-a6xx/cfg/linux-4.4.66.cfg

@@ -1182,7 +1182,7 @@ CONFIG_SCx200_ACB=y
 # PPS support
 #
 CONFIG_PPS=y
-CONFIG_PPS_DEBUG=y
+# CONFIG_PPS_DEBUG is not set
 CONFIG_NTP_PPS=y
 
 #
@@ -2030,8 +2030,6 @@ CONFIG_NLS_UTF8=y
 # Kernel hacking
 #
 CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HAVE_KVM_IRQFD=y
-CONFIG_VFIO_VIRQFD=y
 
 #
 # printk and dmesg options

systems/lctr-a6xx/config

@@ -4,7 +4,7 @@ cfg_services0='dropbear network storage upgrade syslog escc ptpd setserial'
 cfg_services1=''
 cfg_services2='dune'
 cfg_modules=''
-cfg_packages='coreboot-lsts emm-8p-xt-eeprom zlib dropbear rsync busybox flashrom e2fsprogs socat linux escc syslinux syslinux/host ptpd ntp uswitch pciutils bzip2'
+cfg_packages='coreboot-lsts emm-8p-xt-eeprom zlib dropbear rsync busybox flashrom e2fsprogs socat linux escc syslinux syslinux/host ptpd ntp uswitch pciutils bzip2 memtest86+'
 cfg_terminal='ttyS0'
 cfg_target_linux_kernel='arch/x86/boot/bzImage'
 cfg_ptpd_master='true'

systems/lctr-a6xx/lauv-xplore-3.cfg

@@ -0,0 +1,2 @@
+cfg_hostname='lauv-xplore-3'
+cfg_eth_ext_ip='10.0.10.140'

systems/lctr-a6xx/lauv-xplore-4.cfg

@@ -0,0 +1,2 @@
+cfg_hostname='lauv-xplore-4'
+cfg_eth_ext_ip='10.0.10.150'

systems/lctr-a6xx/lauv-xplore-5.cfg

@@ -0,0 +1,2 @@
+cfg_hostname='lauv-xplore-5'
+cfg_eth_ext_ip='10.0.10.160'

systems/lctr-b2xx/lauv-noptilus-1-aux.cfg

@@ -4,4 +4,4 @@ cfg_eth_ext_ip='10.0.10.83'
 cfg_eth_ext_mk='255.255.0.0'
 cfg_eth_ext_gw='10.0.0.1'
 cfg_ptpd_interface='eth0'
-cfg_packages="$cfg_packages boost jansson czmq zeromq lpg"
+cfg_packages="$cfg_packages boost jansson czmq zeromq"

systems/lctr-b2xx/lauv-noptilus-2-aux.cfg

@@ -4,4 +4,4 @@ cfg_eth_ext_ip='10.0.10.93'
 cfg_eth_ext_mk='255.255.0.0'
 cfg_eth_ext_gw='10.0.0.1'
 cfg_ptpd_interface='eth0'
-cfg_packages="$cfg_packages boost jansson czmq zeromq lpg"
+cfg_packages="$cfg_packages boost jansson czmq zeromq"

systems/lctr-b2xx/lauv-noptilus-3-aux.cfg

@@ -4,4 +4,4 @@ cfg_eth_ext_ip='10.0.10.103'
 cfg_eth_ext_mk='255.255.0.0'
 cfg_eth_ext_gw='10.0.0.1'
 cfg_ptpd_interface='eth0'
-cfg_packages="$cfg_packages boost jansson czmq zeromq lpg"
+cfg_packages="$cfg_packages boost jansson czmq zeromq"

systems/lctr-b2xx/patches/linux/4.4.66/00-lctr-b2xx-dts.patch

@@ -1,14 +1,13 @@
-diff -Nru linux-3.13.1/arch/arm/boot/dts/Makefile linux-3.13.1.rasm/arch/arm/boot/dts/Makefile
---- linux-3.13.1/arch/arm/boot/dts/Makefile	2014-01-29 13:06:37.000000000 +0000
-+++ linux-3.13.1.rasm/arch/arm/boot/dts/Makefile	2014-02-01 06:53:43.968486026 +0000
-@@ -198,6 +198,7 @@
+--- linux-4.4.66/arch/arm/boot/dts/Makefile	2017-09-25 13:07:10.353013618 +0100
++++ linux-4.4.66.tsm/arch/arm/boot/dts/Makefile	2017-09-25 13:11:13.523693878 +0100
+@@ -463,6 +463,7 @@
+ 	am335x-evm.dtb \
  	am335x-evmsk.dtb \
- 	am335x-bone.dtb \
- 	am335x-boneblack.dtb \
-+	am335x-lctr-b2xx.dtb \
  	am335x-nano.dtb \
- 	am335x-base0033.dtb \
- 	am3517-evm.dtb \
++	am335x-lctr-b2xx.dtb \
+ 	am335x-pepper.dtb \
+ 	am335x-lxm.dtb \
+ 	am335x-chiliboard.dtb \
 diff -Nru linux-3.13.1/arch/arm/boot/dts/am335x-lctr-b2xx.dts linux-3.13.1.rasm/arch/arm/boot/dts/am335x-lctr-b2xx.dts
 --- linux-3.13.1/arch/arm/boot/dts/am335x-lctr-b2xx.dts	1970-01-01 01:00:00.000000000 +0100
 +++ linux-3.13.1.rasm/arch/arm/boot/dts/am335x-lctr-b2xx.dts	2014-02-01 06:51:48.273816483 +0000