rules/linux-headers/cross: Fixed url.

GCC v5.4 is not needed to compile the new kernel.
This reverts commit 8faf53ef3e.

rules/bridge-utils/default.bash

@@ -1,16 +1,16 @@
 version=\
 (
-    '1.5'
+    '1.6'
 )
 
 url=\
 (
-    "http://downloads.sourceforge.net/project/bridge/bridge/bridge-utils-$version.tar.gz"
+    "http://www.kernel.org/pub/linux/utils/net/bridge-utils/bridge-utils-$version.tar.gz"
 )
 
 md5=\
 (
-    'ec7b381160b340648dede58c31bb2238'
+    'f369e90e85e4bb46baa26a7b9d66b578'
 )
 
 maintainer=\

rules/escc/default.bash

@@ -1,6 +1,6 @@
 version=\
 (
-    '1.0.7'
+    '1.0.71'
 )
 
 url=\
@@ -10,7 +10,7 @@ url=\
 
 md5=\
 (
-    '4e18a516249256e2dad4d79ae56c913d'
+    '075c9256fe20cf6ce867dc2b1c974ebe'
 )
 
 if [ -d "$cfg_dir_builds/linux/linux-"* ]; then

rules/linux-headers/cross.bash

@@ -1,16 +1,16 @@
 version=\
 (
-    '3.14.63'
+    '4.4.66'
 )
 
 url=\
 (
-    "https://www.kernel.org/pub/linux/kernel/v3.x/linux-$version.tar.xz"
+    "https://www.kernel.org/pub/linux/kernel/v4.x/linux-$version.tar.xz"
 )
 
 md5=\
 (
-    '6cf8a6b23849f47f511e0e46cfdb6392'
+    '5353de56bf4621a35afc4384c7e51f30'
 )
 
 maintainer=\

rules/linux/default.bash

@@ -1,16 +1,16 @@
 version=\
 (
-    '3.14.63'
+    '4.4.66'
 )
 
 url=\
 (
-    "https://www.kernel.org/pub/linux/kernel/v3.x/linux-$version.tar.xz"
+    "https://www.kernel.org/pub/linux/kernel/v4.x/linux-$version.tar.xz"
 )
 
 md5=\
 (
-    '6cf8a6b23849f47f511e0e46cfdb6392'
+    '5353de56bf4621a35afc4384c7e51f30'
 )
 
 maintainer=\

rules/linux/rt.bash

@@ -2,12 +2,12 @@
 
 version=\
 (
-    '3.14.64-rt67'
+    '4.4.66-rt79'
 )
 
 url=\
 (
-    "https://www.kernel.org/pub/linux/kernel/v3.x/linux-$(linux_mmp_version).tar.xz"
+    "https://www.kernel.org/pub/linux/kernel/v4.x/linux-$(linux_mmp_version).tar.xz"
     "https://www.kernel.org/pub/linux/kernel/projects/rt/$(linux_mm_version)/patch-$version.patch.gz"
 )
 

rules/linux/v3_14.bash

@@ -0,0 +1,212 @@
+version=\
+(
+    '3.14.63'
+)
+
+url=\
+(
+    "https://www.kernel.org/pub/linux/kernel/v3.x/linux-$version.tar.xz"
+)
+
+md5=\
+(
+    '6cf8a6b23849f47f511e0e46cfdb6392'
+)
+
+maintainer=\
+(
+    'Ricardo Martins <rasm@fe.up.pt>'
+)
+
+requires=\
+(
+    'bc/host'
+    'kmod/host'
+    'lz4/host'
+)
+
+# This variable is updated by find_patches().
+patches=()
+
+# Major/Minor version.
+linux_mm_version()
+{
+    echo "$version" | cut -f1-2 -d.
+}
+
+# Major/Minor/Patch version.
+linux_mmp_version()
+{
+    echo "$version" | cut -f1 -d-
+}
+
+find_patches()
+{
+    patches=(\
+        $(ls -1 \
+             "$pkg_dir/patches/$version/"*.patch \
+             "$pkg_dir/patches/$(linux_mmp_version)/"*.patch \
+             "$pkg_dir/patches/$(linux_mm_version)/"*.patch \
+             "$cfg_dir_system/patches/linux/$version/"*.patch \
+             "$cfg_dir_system/patches/linux/$(linux_mmp_version)/"*.patch \
+             "$cfg_dir_system/patches/linux/$(linux_mm_version)/"*.patch \
+             2> /dev/null | awk '!a[$0]++')
+    )
+}
+
+find_patches
+
+# Get configuration file.
+linux_cfg_file()
+{
+    for f in "$version" "$(linux_mmp_version)" "$(linux_mm_version)"; do
+        f="$cfg_dir_system/cfg/linux-$f.cfg"
+        if [ -f "$f" ]; then
+            echo "$f"
+            return 0
+        fi
+
+        echo "Candidate kernel configuration file '$f' doesn't exist." 1>&2
+    done
+
+    echo "ERROR: failed to find a valid kernel configuration file." 1>&2
+    return 1
+}
+
+post_unpack()
+{
+    cp -r ../linux-3.14.63/* ../linux_3.3-3.14.63
+    n=0; while [ -n "${patches[$n]}" ]; do
+             patch="${patches[$n]}"
+             echo "* Applying $patch..."
+             (ucat "$patch" | patch -p1) || return 1
+             let n++
+         done
+
+    if [ -d "$cfg_dir_toolchain/firmware" ]; then
+        tar -C "$cfg_dir_toolchain/firmware" -c -v -f - . | tar -C firmware -x -v -f -
+    fi
+}
+
+refresh()
+{
+    for rule in configure build target_install; do
+        if [ "$(linux_cfg_file)" -nt "$cfg_dir_builds/linux/$pkg_var/.$rule" ]; then
+            rm "$cfg_dir_builds/linux/$pkg_var/.$rule"
+        fi
+    done
+}
+
+configure()
+{
+    $cmd_make \
+        ARCH=${cfg_target_linux} \
+        mrproper || return 1
+
+    cfg="$(linux_cfg_file)"
+    [ -n "$cfg" ] || return 1
+    $cmd_cp "$cfg" .config || return 1
+
+    if [ -f "$cfg_dir_system/files/initramfs_init.sh" ]; then
+        $cmd_mkdir initramfs &&
+        $cmd_cp "$pkg_dir/files/initramfs.conf" . &&
+        $cmd_cp "$cfg_dir_system/files/initramfs_init.sh" initramfs/init.sh &&
+        $cmd_cp "$cfg_dir_rootfs/bin/busybox" initramfs/busybox
+    fi
+
+    yes '' | $cmd_make \
+        CROSS_COMPILE=${cfg_target_canonical}- \
+        ARCH=${cfg_target_linux} \
+        oldconfig
+}
+
+build()
+{
+    $cmd_make \
+        CROSS_COMPILE=$cfg_target_canonical- \
+        ARCH=$cfg_target_linux || return 1
+
+    $cmd_make \
+        CROSS_COMPILE=$cfg_target_canonical- \
+        ARCH=$cfg_target_linux \
+        DEPMOD="$cfg_dir_toolchain/sbin/depmod" \
+        modules || return 1
+
+    if [ "$(basename $cfg_target_linux_kernel)" = 'uImage' ]; then
+        $cmd_make \
+            CROSS_COMPILE=$cfg_target_canonical- \
+            ARCH=$cfg_target_linux \
+            DEPMOD="$cfg_dir_toolchain/sbin/depmod" \
+            uImage || return 1
+    fi
+
+    # Compressed image.
+    if [ "$(basename $cfg_target_linux_kernel)" = 'zImage' ]; then
+        $cmd_make \
+            CROSS_COMPILE=$cfg_target_canonical- \
+            ARCH=$cfg_target_linux \
+            DEPMOD="$cfg_dir_toolchain/sbin/depmod" \
+            zImage || return 1
+    fi
+
+    # Device tree blob.
+    if [ -n "$cfg_target_linux_dtb" ]; then
+        $cmd_make \
+            CROSS_COMPILE=$cfg_target_canonical- \
+            ARCH=$cfg_target_linux \
+            DEPMOD="$cfg_dir_toolchain/sbin/depmod" \
+            dtbs || return 1
+    fi
+
+    if [ -n "${cfg_target_linux_size}" ]; then
+        dd if="$cfg_target_linux_kernel" of="${cfg_target_linux_kernel}.padded" \
+            ibs="${cfg_target_linux_size}" conv=sync &&
+        mv "${cfg_target_linux_kernel}.padded" "${cfg_target_linux_kernel}"
+    fi
+}
+
+target_install()
+{
+    if [ -n "$(file "$cfg_target_linux_kernel" | grep ELF)" ]; then
+        strip="$(echo $cfg_dir_toolchain/bin/*-strip)"
+        $strip -s -R .comment "$cfg_target_linux_kernel"
+    fi
+
+    # Kernel image.
+    if [ -n "$cfg_target_linux_kernel" ]; then
+        cp -v "$cfg_target_linux_kernel" "$cfg_dir_rootfs/boot/kernel"
+    else
+        echo "ERROR: failed to find kernel image at '$cfg_target_linux_kernel'"
+        return 1
+    fi
+
+    # Device tree blobs.
+    dts="arch/$cfg_target_linux/boot/dts"
+    if [ -d "$dts" ]; then
+        $cmd_mkdir "$cfg_dir_rootfs/boot" &&
+            cp -v "$dts/"*.dtb "$cfg_dir_rootfs/boot"
+    fi
+
+    # Device tree overlays.
+    overlays_dir="arch/$cfg_target_linux/boot/dts/overlays"
+    if [ -d "$overlays_dir" ]; then
+	$cmd_mkdir "$cfg_dir_rootfs/boot/overlays" || return 1
+        $cmd_cp "$overlays_dir"/*.dtbo "$cfg_dir_rootfs/boot/overlays" || return 1
+    fi
+
+    $cmd_make \
+        CROSS_COMPILE="$cfg_target_canonical-" \
+        ARCH="$cfg_target_linux" \
+        INSTALL_MOD_PATH="$cfg_dir_rootfs/usr" \
+        KBUILD_VERBOSE=1 \
+        DEPMOD="$cfg_dir_toolchain/sbin/depmod" \
+        modules_install
+
+    $cmd_make \
+        CROSS_COMPILE="$cfg_target_canonical-" \
+        ARCH="$cfg_target_linux" \
+        INSTALL_MOD_PATH="$cfg_dir_rootfs/usr" \
+        KBUILD_VERBOSE=1 \
+        DEPMOD="$cfg_dir_toolchain/sbin/depmod" \
+        firmware_install
+}

rules/memtest86+/default.bash

@@ -1,32 +0,0 @@
-version=\
-(
-    "5.01"
-)
-
-url=\
-(
-    "http://www.lsts.pt/glued/memtest86+-$version.tar.gz"
-)
-
-md5=\
-(
-    "035b85f2edabc9b4a6b0cf6c9c3acf50"
-)
-
-maintainer=\
-(
-    'Tiago Sá Marques <tsmarques@fe.up.pt>'
-)
-
-build()
-{
-    $cmd_make \
-        CC=$cmd_target_cc \
-        CXX=$cmd_target_cxx
-}
-
-target_install()
-{
-    $cmd_cp ./memtest.bin $cfg_dir_rootfs/boot/
-    tar -C "$pkg_dir/fs" --exclude .svn -c -f - . | tar -C "$cfg_dir_rootfs" -x -v -f -
-}

rules/memtest86+/fs/usr/bin/start-memtest

@@ -1,14 +0,0 @@
-#! /bin/sh
-
-echo "Starting memtest in 10 seconds (requires reboot), Ctrl-C to cancel..."
-for r in 0 1 2 3 4 5 6 7 8 9; do
-    printf "."
-    sleep 1
-done
-
-mount -o remount,rw /
-extlinux -o "memtest" /boot/extlinux/
-mount -o remount,ro /
-
-echo "* Rebooting now"
-reboot

rules/syslinux/extlinux.conf

@@ -1,6 +1,3 @@
 LABEL linux
    KERNEL /boot/kernel
    APPEND rootwait root=$cfg_kernel_boot_dev rootfstype=ext2 ro $cfg_kernel_extra_args
-
-LABEL memtest
-   LINUX /boot/memtest.bin

systems/lauv-aux-rpi/lauv-xtreme-2-aux.cfg

@@ -3,4 +3,3 @@ cfg_eth_ext_ip='10.0.10.53'
 cfg_eth_ext_mk='255.255.0.0'
 cfg_eth_ext_gw='10.0.0.1'
 cfg_ptpd_interface='eth0'
-cfg_lauv_storage='internal'

systems/lctr-a6xx/config

@@ -4,7 +4,7 @@ cfg_services0='dropbear network storage upgrade syslog escc ptpd setserial'
 cfg_services1=''
 cfg_services2='dune'
 cfg_modules=''
-cfg_packages='coreboot-lsts emm-8p-xt-eeprom zlib dropbear rsync busybox flashrom e2fsprogs socat linux escc syslinux syslinux/host ptpd ntp uswitch pciutils bzip2 memtest86+'
+cfg_packages='coreboot-lsts emm-8p-xt-eeprom zlib dropbear rsync busybox flashrom e2fsprogs socat linux escc syslinux syslinux/host ptpd ntp uswitch pciutils bzip2'
 cfg_terminal='ttyS0'
 cfg_target_linux_kernel='arch/x86/boot/bzImage'
 cfg_ptpd_master='true'

systems/lctr-a6xx/patches/linux/4.4.66/00-aim104-com8.patch

@@ -0,0 +1,85 @@
+diff -Nru a/drivers/tty/serial/8250/8250_aim104_com8.c b/drivers/tty/serial/8250/8250_aim104_com8.c
+--- a/drivers/tty/serial/8250/8250_aim104_com8.c
++++ b/drivers/tty/serial/8250/8250_aim104_com8.c
+@@ -0,0 +1,51 @@
++#include <linux/module.h>
++#include <linux/init.h>
++#include <linux/serial_8250.h>
++
++#define PORT(_base,_irq)				\
++	{						\
++		.iobase		= _base,		\
++		.irq		= _irq,			\
++		.uartclk	= 1843200,		\
++		.iotype		= UPIO_PORT,		\
++		.flags		= UPF_BOOT_AUTOCONF | UPF_BUGGY_UART,	\
++	}
++
++static struct plat_serial8250_port aim104_data[] = {
++	PORT(0x100, 10),
++	PORT(0x108, 10),
++	PORT(0x110, 10),
++	PORT(0x118, 10),
++	PORT(0x120, 10),
++	PORT(0x128, 10),
++	PORT(0x130, 10),
++	PORT(0x138, 10),
++	PORT(0x300, 6),
++	PORT(0x308, 6),
++	PORT(0x310, 6),
++	PORT(0x318, 6),
++	PORT(0x320, 6),
++	PORT(0x328, 6),
++	PORT(0x330, 6),
++	PORT(0x338, 6),
++	{ },
++};
++
++static struct platform_device exar_device = {
++	.name			= "serial8250",
++	.id			= PLAT8250_DEV_PLATFORM,
++	.dev			= {
++		.platform_data	= aim104_data,
++	},
++};
++
++static int __init exar_init(void)
++{
++	return platform_device_register(&exar_device);
++}
++
++module_init(exar_init);
++
++MODULE_AUTHOR("Ricardo Martins");
++MODULE_DESCRIPTION("8250 serial probe module for Eurotech AIM104-COM8");
++MODULE_LICENSE("GPL");
+diff -Nru a/drivers/tty/serial/8250/Kconfig b/drivers/tty/serial/8250/Kconfig
+--- a/drivers/tty/serial/8250/Kconfig
++++ b/drivers/tty/serial/8250/Kconfig
+@@ -225,6 +225,15 @@ config SERIAL_8250_EXAR_ST16C554
+ 	  To compile this driver as a module, choose M here: the module
+ 	  will be called 8250_exar_st16c554.
+
++config SERIAL_8250_AIM104_COM8
++	tristate "Support Eurotech AIM104-COM8 Dual Quad UART"
++	depends on SERIAL_8250 != n && ISA && SERIAL_8250_MANY_PORTS
++	help
++	  Eurotech AIM104-COM8 Dual Quad UART.
++
++	  To compile this driver as a module, choose M here: the module
++	  will be called 8250_aim104_com8.
++
+ config SERIAL_8250_HUB6
+ 	tristate "Support Hub6 cards"
+ 	depends on SERIAL_8250 != n && ISA && SERIAL_8250_MANY_PORTS
+diff -Nru a/drivers/tty/serial/8250/Makefile b/drivers/tty/serial/8250/Makefile
+--- a/drivers/tty/serial/8250/Makefile
++++ b/drivers/tty/serial/8250/Makefile
+@@ -17,6 +17,7 @@ obj-$(CONFIG_SERIAL_8250_FOURPORT)	+= 8250_fourport.o
+ obj-$(CONFIG_SERIAL_8250_ACCENT)	+= 8250_accent.o
+ obj-$(CONFIG_SERIAL_8250_BOCA)		+= 8250_boca.o
+ obj-$(CONFIG_SERIAL_8250_EXAR_ST16C554)	+= 8250_exar_st16c554.o
++obj-$(CONFIG_SERIAL_8250_AIM104_COM8)	+= 8250_aim104_com8.o
+ obj-$(CONFIG_SERIAL_8250_HUB6)		+= 8250_hub6.o
+ obj-$(CONFIG_SERIAL_8250_MCA)		+= 8250_mca.o
+ obj-$(CONFIG_SERIAL_8250_FSL)		+= 8250_fsl.o

systems/lctr-a6xx/patches/linux/4.4.66/90-st16654-fifo-trigger-16.patch

@@ -0,0 +1,14 @@
+diff --git a/drivers/tty/serial/8250/8250_port.c b/drivers/tty/serial/8250/8250_port.c
+index 52d82d2..613c7e9 100644
+--- a/drivers/tty/serial/8250/8250_port.c
++++ b/drivers/tty/serial/8250/8250_port.c
+@@ -132,8 +132,7 @@ static const struct serial8250_config uart_config[] = {
+ 		.name		= "ST16654",
+ 		.fifo_size	= 64,
+ 		.tx_loadsz	= 32,
+-		.fcr		= UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_01 |
+-				  UART_FCR_T_TRIG_10,
++		.fcr		= UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_00,
+ 		.rxtrig_bytes	= {8, 16, 56, 60},
+ 		.flags		= UART_CAP_FIFO | UART_CAP_EFR | UART_CAP_SLEEP,
+ 	},

systems/lctr-a9xx/config

@@ -4,7 +4,7 @@ cfg_modules=''
 cfg_services0='dropbear network storage upgrade syslog'
 cfg_services1='huawei ntpd'
 cfg_services2='dune'
-cfg_packages='u-boot dropbear rsync busybox linux uswitch ppp iptables socat bridge-utils ntp e2fsprogs i2c-tools iperf dnsmasq'
+cfg_packages='u-boot dropbear rsync busybox linux/v3_14 uswitch ppp iptables socat bridge-utils ntp e2fsprogs i2c-tools iperf dnsmasq'
 cfg_target_linux_kernel='arch/arm/boot/zImage'
 cfg_target_linux_dtb='arch/arm/boot/dts/omap3-lctr-a9xx.dtb'
 cfg_target_uboot_config='igep0020'

systems/lctr-a9xx/patches/linux/4.4.66/00-lctr-a9xx-dts.patch

@@ -0,0 +1,105 @@
+diff --git linux-4.4.66/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
+index 30bbc37..7241be6 100644
+--- linux-4.4.66/arch/arm/boot/dts/Makefile
++++ linux-4.4.66/arch/arm/boot/dts/Makefile
+@@ -421,6 +421,7 @@
+	omap3-igep0020-rev-f.dtb \
+	omap3-igep0030.dtb \
+	omap3-igep0030-rev-g.dtb \
++	omap3-lctr-a9xx.dtb \
+	omap3-ldp.dtb \
+	omap3-lilly-dbb056.dtb \
+	omap3-n900.dtb \
+diff -Nru linux-4.4.66/arch/arm/boot/dts/omap3-lctr-a9xx.dts linux-4.4.66.rasm/arch/arm/boot/dts/omap3-lctr-a9xx.dts
+--- linux-4.4.66/arch/arm/boot/dts/omap3-lctr-a9xx.dts
++++ linux-4.4.66.rasm/arch/arm/boot/dts/omap3-lctr-a9xx.dts
+@@ -0,0 +1,89 @@
++/*
++ * Copyright (C) 2014 Universidade do Porto - Faculdade de Engenharia
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as
++ * published by the Free Software Foundation.
++ */
++
++#include <dt-bindings/input/input.h>
++#include "omap3-igep0020.dts"
++
++/ {
++	leds {
++		boot {
++			linux,default-trigger = "heartbeat";
++		};
++	};
++
++	gpio_keys {
++		pinctrl-names = "default";
++		pinctrl-0 = <&gpio_keys_pins>;
++		compatible = "gpio-keys";
++
++		button@0 {
++			label = "Button 0";
++			gpios = <&gpio5 11 GPIO_ACTIVE_HIGH>;	/* gpio_139 */
++			linux,code = <BTN_0>;
++			debounce-interval = <5>;
++		};
++
++		button@1 {
++			label = "Button 1";
++			gpios = <&gpio5 10 GPIO_ACTIVE_HIGH>;	/* gpio_138 */
++			linux,code = <BTN_1>;
++			debounce-interval = <5>;
++		};
++
++		button@2 {
++			label = "Button 2";
++			gpios = <&gpio5 9 GPIO_ACTIVE_HIGH>;	/* gpio_137 */
++			linux,code = <BTN_2>;
++			debounce-interval = <5>;
++		};
++	};
++
++	pps {
++		compatible = "pps-gpio";
++		pinctrl-names = "default";
++		pinctrl-0 = <&pps_pins>;
++		gpios = <&gpio5 8 GPIO_ACTIVE_HIGH>;
++		assert-rising-edge;
++	};
++};
++
++&omap3_pmx_core {
++	gpio_keys_pins: pinmux_gpio_keys_pins {
++		pinctrl-single,pins = <
++			0x136 (PIN_INPUT_PULLDOWN | MUX_MODE4)	/* gpio_137 - button 2 */
++			0x138 (PIN_INPUT_PULLDOWN | MUX_MODE4)	/* gpio_138 - button 1 */
++			0x13a (PIN_INPUT_PULLDOWN | MUX_MODE4)	/* gpio_139 - button 0 */
++		>;
++	};
++
++	pps_pins: pinmux_pps_pins {
++		pinctrl-single,pins = <
++			0x134 (PIN_INPUT_PULLDOWN | MUX_MODE4)	/* gpio_136 */
++		>;
++	};
++};
++
++&i2c2 {
++	rtc@68 {
++		compatible = "dallas,ds1307";
++		reg = <0x68>;
++	};
++};
++
++/* Disable WiFi/Bluetooth combo. */
++&mmc2 {
++	status = "disabled";
++};
++
++&vdd33 {
++	status = "disabled";
++};
++
++&lbee1usjyc_pdn {
++	status = "disabled";
++};

systems/lctr-a9xx/x8-02.cfg

@@ -1,3 +1,3 @@
 cfg_hostname='x8-02'
 cfg_eth_ext_ip='10.0.20.100'
-cfg_packages='u-boot dropbear rsync busybox linux uswitch ppp iptables socat bridge-utils ntp e2fsprogs i2c-tools iperf dnsmasq libav'
+cfg_packages='u-boot dropbear rsync busybox linux/v3_14 uswitch ppp iptables socat bridge-utils ntp e2fsprogs i2c-tools iperf dnsmasq libav'

systems/lctr-b2xx/lauv-noptilus-1-aux.cfg

@@ -4,4 +4,4 @@ cfg_eth_ext_ip='10.0.10.83'
 cfg_eth_ext_mk='255.255.0.0'
 cfg_eth_ext_gw='10.0.0.1'
 cfg_ptpd_interface='eth0'
-cfg_packages="$cfg_packages boost jansson czmq zeromq"
+cfg_packages="$cfg_packages boost jansson czmq zeromq lpg"

systems/lctr-b2xx/lauv-noptilus-2-aux.cfg

@@ -4,4 +4,4 @@ cfg_eth_ext_ip='10.0.10.93'
 cfg_eth_ext_mk='255.255.0.0'
 cfg_eth_ext_gw='10.0.0.1'
 cfg_ptpd_interface='eth0'
-cfg_packages="$cfg_packages boost jansson czmq zeromq"
+cfg_packages="$cfg_packages boost jansson czmq zeromq lpg"

systems/lctr-b2xx/lauv-noptilus-3-aux.cfg

@@ -4,4 +4,4 @@ cfg_eth_ext_ip='10.0.10.103'
 cfg_eth_ext_mk='255.255.0.0'
 cfg_eth_ext_gw='10.0.0.1'
 cfg_ptpd_interface='eth0'
-cfg_packages="$cfg_packages boost jansson czmq zeromq"
+cfg_packages="$cfg_packages boost jansson czmq zeromq lpg"

systems/ntnu-b2xx/cfg/linux-3.14.63.cfg

@@ -2622,3 +2622,8 @@ CONFIG_CLZ_TAB=y
 CONFIG_MPILIB=m
 CONFIG_OID_REGISTRY=m
 CONFIG_VIRTUALIZATION=y
+
+CONFIG_RFKILL=y
+CONFIG_CFG80211=y
+CONFIG_NL80211=y
+CONFIG_RT2800USB=y

systems/ntnu-b2xx/fs/etc/rc.d/rtklib_rtkrcv

@@ -1,5 +1,9 @@
 start()
 {
+    if [ ! -d "/opt/lsts/rtklib/" ]; then
+      mkdir /opt/lsts/rtklib
+    fi
+
     localBackupPath="/opt/lsts/rtklib/rtklib_cmdfile.cmd"
     cfgPath="/etc/rtklib/conf/rtkrcv.conf"
     cfgPathUse="/opt/lsts/rtklib/conf_use.conf"

systems/ntnu-b2xx/ntnu-bixler-001.cfg

@@ -0,0 +1,8 @@
+# ntnu-bixler-00x
+cfg_hostname='ntnu-bixler-001'
+cfg_eth_ext_ip='10.0.60.180'
+cfg_eth_ext_mk='255.255.0.0'
+cfg_eth_ext_gw='10.0.60.1'
+cfg_ptpd_interface='eth0'
+cfg_packages='u-boot dropbear rsync busybox e2fsprogs ptpd i2c-tools am33xx-cm3/host linux rtklib libphidget ethtool socat'
+cfg_services1='vsp_pair rtc-ds3231 rtklib_rtkrcv'

systems/ntnu-b2xx/ntnu-cruisermini-001-pseudo.cfg

@@ -0,0 +1,7 @@
+# ntnu-cruisermini-00x
+cfg_hostname='ntnu-cruisermini-001-pseudo'
+cfg_eth_ext_ip='10.0.60.149'
+cfg_eth_ext_mk='255.255.0.0'
+cfg_eth_ext_gw='10.0.60.1'
+cfg_ptpd_interface='eth0'
+cfg_packages='u-boot dropbear rsync busybox e2fsprogs ptpd i2c-tools am33xx-cm3/host linux rtklib libphidget ethtool socat openssl openssh sshpass'

systems/ntnu-b2xx/ntnu-cruisermini-001.cfg

@@ -0,0 +1,7 @@
+# ntnu-cruisermini-00x
+cfg_hostname='ntnu-cruisermini-001'
+cfg_eth_ext_ip='10.0.60.145'
+cfg_eth_ext_mk='255.255.0.0'
+cfg_eth_ext_gw='10.0.60.1'
+cfg_ptpd_interface='eth0'
+cfg_packages='u-boot dropbear rsync busybox e2fsprogs ptpd i2c-tools am33xx-cm3/host linux rtklib libphidget ethtool socat openssl openssh sshpass'

systems/ntnu-b2xx/ntnu-cruisermini-002.cfg

@@ -0,0 +1,7 @@
+# ntnu-cruisermini-00x
+cfg_hostname='ntnu-cruisermini-002'
+cfg_eth_ext_ip='10.0.60.150'
+cfg_eth_ext_mk='255.255.0.0'
+cfg_eth_ext_gw='10.0.60.1'
+cfg_ptpd_interface='eth0'
+cfg_packages='u-boot dropbear rsync busybox e2fsprogs ptpd i2c-tools am33xx-cm3/host linux rtklib libphidget ethtool socat openssl openssh sshpass'

systems/ntnu-b2xx/ntnu-cruisermini-003.cfg

@@ -0,0 +1,7 @@
+# ntnu-cruisermini-00x
+cfg_hostname='ntnu-cruisermini-003'
+cfg_eth_ext_ip='10.0.60.155'
+cfg_eth_ext_mk='255.255.0.0'
+cfg_eth_ext_gw='10.0.60.1'
+cfg_ptpd_interface='eth0'
+cfg_packages='u-boot dropbear rsync busybox e2fsprogs ptpd i2c-tools am33xx-cm3/host linux rtklib libphidget ethtool socat openssl openssh sshpass'

systems/ntnu-b2xx/ntnu-cruisermini-004.cfg

@@ -0,0 +1,7 @@
+# ntnu-cruisermini-00x
+cfg_hostname='ntnu-cruisermini-004'
+cfg_eth_ext_ip='10.0.60.160'
+cfg_eth_ext_mk='255.255.0.0'
+cfg_eth_ext_gw='10.0.60.1'
+cfg_ptpd_interface='eth0'
+cfg_packages='u-boot dropbear rsync busybox e2fsprogs ptpd i2c-tools am33xx-cm3/host linux rtklib libphidget ethtool socat openssl openssh sshpass'

systems/ntnu-b2xx/ntnu-cruisermini-005.cfg

@@ -0,0 +1,7 @@
+# ntnu-cruisermini-00x
+cfg_hostname='ntnu-cruisermini-005'
+cfg_eth_ext_ip='10.0.60.165'
+cfg_eth_ext_mk='255.255.0.0'
+cfg_eth_ext_gw='10.0.60.1'
+cfg_ptpd_interface='eth0'
+cfg_packages='u-boot dropbear rsync busybox e2fsprogs ptpd i2c-tools am33xx-cm3/host linux rtklib libphidget ethtool socat openssl openssh sshpass'

systems/ntnu-b2xx/ntnu-cruisermini-006.cfg

@@ -0,0 +1,7 @@
+# ntnu-cruisermini-00x
+cfg_hostname='ntnu-cruisermini-006'
+cfg_eth_ext_ip='10.0.60.170'
+cfg_eth_ext_mk='255.255.0.0'
+cfg_eth_ext_gw='10.0.60.1'
+cfg_ptpd_interface='eth0'
+cfg_packages='u-boot dropbear rsync busybox e2fsprogs ptpd i2c-tools am33xx-cm3/host linux rtklib libphidget ethtool socat openssl openssh sshpass'

systems/ntnu-b2xx/ntnu-hexa-002.cfg

@@ -4,5 +4,5 @@ cfg_eth_ext_ip='10.0.60.205'
 cfg_eth_ext_mk='255.255.0.0'
 cfg_eth_ext_gw='10.0.60.1'
 cfg_ptpd_interface='eth0'
-cfg_packages='u-boot dropbear rsync busybox e2fsprogs ptpd i2c-tools am33xx-cm3/host linux libphidget'
+cfg_packages='u-boot dropbear rsync busybox e2fsprogs ptpd i2c-tools am33xx-cm3/host linux rtklib libphidget ethtool socat'
-cfg_services1='rtc-ds3231'
+cfg_services1='vsp_pair rtc-ds3231 rtklib_rtkrcv'

systems/ntnu-b2xx/ntnu-hexa-003.cfg

@@ -4,5 +4,5 @@ cfg_eth_ext_ip='10.0.60.210'
 cfg_eth_ext_mk='255.255.0.0'
 cfg_eth_ext_gw='10.0.60.1'
 cfg_ptpd_interface='eth0'
-cfg_packages='u-boot dropbear rsync busybox e2fsprogs ptpd i2c-tools am33xx-cm3/host linux rtklib libphidget ethtool socat'
+cfg_packages='u-boot dropbear rsync busybox e2fsprogs ptpd i2c-tools am33xx-cm3/host linux rtklib libphidget ethtool socat openssl openssh sshpass'
-cfg_services1='vsp_pair rtc-ds3231 force_10mbit rtklib_rtkrcv'
+cfg_services1='vsp_pair rtc-ds3231 rtklib_rtkrcv'

systems/ntnu-b2xx/ntnu-hexa-004.cfg

@@ -5,4 +5,4 @@ cfg_eth_ext_mk='255.255.0.0'
 cfg_eth_ext_gw='10.0.60.1'
 cfg_ptpd_interface='eth0'
 cfg_packages='u-boot dropbear rsync busybox e2fsprogs ptpd i2c-tools am33xx-cm3/host linux rtklib libphidget ethtool socat'
-cfg_services1='vsp_pair rtc-ds3231 force_10mbit rtklib_rtkrcv' 
+cfg_services1='vsp_pair rtc-ds3231 rtklib_rtkrcv'

systems/ntnu-b2xx/ntnu-nest-04.cfg

@@ -0,0 +1,8 @@
+# ntnu-nest-0x
+cfg_hostname='ntnu-nest-04'
+cfg_eth_ext_ip='10.0.60.53'
+cfg_eth_ext_mk='255.255.0.0'
+cfg_eth_ext_gw='10.0.60.1'
+cfg_ptpd_interface='eth0'
+cfg_packages='u-boot dropbear rsync busybox e2fsprogs ptpd i2c-tools am33xx-cm3/host linux openssl openssh sshpass rtklib'
+cfg_services1='vsp_pair  rtc-ds3231 rtklib_rtkrcv'

systems/ntnu-b2xx/ntnu-octo-001.cfg

@@ -0,0 +1,8 @@
+# ntnu-octo-00x
+cfg_hostname='ntnu-octo-001'
+cfg_eth_ext_ip='10.0.60.225'
+cfg_eth_ext_mk='255.255.0.0'
+cfg_eth_ext_gw='10.0.60.1'
+cfg_ptpd_interface='eth0'
+cfg_packages='u-boot dropbear rsync busybox e2fsprogs ptpd i2c-tools am33xx-cm3/host linux rtklib libphidget ethtool socat openssl openssh sshpass'
+cfg_services1='vsp_pair rtc-ds3231 rtklib_rtkrcv'

systems/ntnu-b2xx/ntnu-x8-002.cfg

@@ -4,5 +4,5 @@ cfg_eth_ext_ip='10.0.60.105'
 cfg_eth_ext_mk='255.255.0.0'
 cfg_eth_ext_gw='10.0.60.1'
 cfg_ptpd_interface='eth0'
-cfg_packages='u-boot dropbear rsync busybox e2fsprogs ptpd i2c-tools am33xx-cm3/host linux rtklib libphidget ethtool socat'
+cfg_packages='u-boot dropbear rsync busybox e2fsprogs ptpd i2c-tools am33xx-cm3/host linux rtklib libphidget ethtool socat openssl openssh sshpass'
 cfg_services1='vsp_pair rtc-ds3231 rtklib_rtkrcv'

systems/ntnu-b2xx/ntnu-x8-008.cfg

@@ -5,4 +5,5 @@ cfg_eth_ext_ip='10.0.60.135'
 cfg_eth_ext_mk='255.255.0.0'
 cfg_eth_ext_gw='10.0.60.1'
 cfg_ptpd_interface='eth0'
-cfg_packages='u-boot dropbear rsync busybox e2fsprogs ptpd i2c-tools am33xx-cm3/host linux libav libswiftnav'
+cfg_packages='u-boot dropbear rsync busybox e2fsprogs ptpd i2c-tools am33xx-cm3/host linux rtklib libphidget ethtool socat openssl openssh sshpass'
+cfg_services1='vsp_pair rtc-ds3231 rtklib_rtkrcv'