Preparing v1.12.1.

lctr-b2xx/patches/linux: Added device-tree file patch for uart2,4 and gpio

architectures/arm-1176.cfg

@@ -1,5 +1,6 @@
 cfg_target_canonical="armv11-$cfg_glued_vendor-linux-gnueabi"
 cfg_target_linux='arm'
+cfg_target_uboot_arch='arm'
 cfg_target_gcc_flags='-O2 -pipe -funit-at-a-time -mcpu=arm1176jzf-s -mtune=arm1176jzf-s -mfloat-abi=softfp -mfpu=vfpv3'
 cfg_target_gcc_configure_flags='--with-arch=armv7-a --with-cpu=arm1176jzf-s --with-tune=arm1176jzf-s --with-fpu=vfpv3 --with-float=softfp'
 cfg_target_ar_flags='elf32-littlearm'

architectures/cortex-a8.cfg

@@ -1,6 +1,6 @@
 cfg_target_canonical="armv7-$cfg_glued_vendor-linux-gnueabi"
 cfg_target_linux='arm'
+cfg_target_uboot_arch='arm'
 cfg_target_gcc_flags='-O2 -pipe -funit-at-a-time -mcpu=cortex-a8 -mtune=cortex-a8 -mfloat-abi=softfp -mfpu=vfpv3'
 cfg_target_gcc_configure_flags='--with-arch=armv7-a --with-cpu=cortex-a8 --with-tune=cortex-a8 --with-fpu=vfpv3 --with-float=softfp'
 cfg_target_ar_flags='elf32-littlearm'
-cfg_target_uboot_arch='arm'

mkconfig.bash

@@ -23,7 +23,7 @@
 ###########################################################################
 
 # Config: GLUED version.
-cfg_glued_version='1.11.1'
+cfg_glued_version='1.12.1'
 # Config: GLUED vendor.
 cfg_glued_vendor='lsts'
 

mkdisk.bash

@@ -95,7 +95,7 @@ create_part_root()
         || die
 
     nfo2 "Creating filesystem"
-    mkfs.ext2 -q -L "$part_label" "$part_dev" || die
+    "$cmd_mkfs_ext2" -q -F -L "$part_label" "$part_dev" > /dev/null 2>&1 || die
 
     nfo2 "Populating filesystem"
     cmd_mount ext2 "$part_dev" || die
@@ -128,7 +128,7 @@ create_part_data()
         || die
 
     nfo2 "Creating filesystem"
-    mkfs.ext4 -q -L "$part_label" -O dir_index "$part_dev" || die
+    "$cmd_mkfs_ext4" -q -F -L "$part_label" -O dir_index "$part_dev" > /dev/null 2>&1 || die
 
     nfo2 "Populating filesystem"
     cmd_mount ext4 "$part_dev" || die
@@ -167,6 +167,13 @@ else
     cmd_parted="parted"
 fi
 
+if [ -x "$cfg_dir_toolchain/sbin/fdisk" ]; then
+    cmd_fdisk="$cfg_dir_toolchain/sbin/fdisk"
+else
+    echo "Warning: using system fdisk, this might lead to errors"
+    cmd_fdisk="fdisk"
+fi
+
 if [ -x "$cfg_dir_toolchain/sbin/mkdosfs" ]; then
     cmd_mkdosfs="$cfg_dir_toolchain/sbin/mkdosfs"
 else
@@ -174,6 +181,20 @@ else
     cmd_mkdosfs="mkdosfs"
 fi
 
+if [ -x "$cfg_dir_toolchain/sbin/mkfs.ext2" ]; then
+    cmd_mkfs_ext2="$cfg_dir_toolchain/sbin/mkfs.ext2"
+else
+    echo "Warning: using system mkfs.ext2, this might lead to errors"
+    cmd_mkfs_ext2="mkfs.ext2"
+fi
+
+if [ -x "$cfg_dir_toolchain/sbin/mkfs.ext4" ]; then
+    cmd_mkfs_ext4="$cfg_dir_toolchain/sbin/mkfs.ext4"
+else
+    echo "Warning: using system mkfs.ext4, this might lead to errors"
+    cmd_mkfs_ext4="mkfs.ext4"
+fi
+
 source "functions.bash"
 
 dev="$2"
@@ -215,6 +236,7 @@ cmd_parted "$dev_loop" \
     || die
 
 part_nr=1
+xboot_system_id=0
 for ((i = 0; i < ${#cfg_partitions[@]}; i += 4)); do
     part_type="${cfg_partitions[$i+0]}"
     part_label="${cfg_partitions[$i+1]}"
@@ -225,6 +247,7 @@ for ((i = 0; i < ${#cfg_partitions[@]}; i += 4)); do
     case $part_type in
         'x-boot')
             create_part_xboot
+            xboot_system_id=1
             ;;
         'root')
             create_part_root
@@ -250,5 +273,10 @@ nfo1 "Synchronizing caches"
 sync && sync && sync && sync && sync && sync
 blockdev --flushbufs "$dev_loop" || die
 
+# Make sure the partition has 0x0e type.
+if [ $xboot_system_id -eq 1 ]; then
+    echo -en "t\n1\ne\nw\n" | $cmd_fdisk "$dev_loop" > /dev/null 2>&1
+fi
+
 nfo1 "Detaching loop device $dev_loop"
 losetup -v -d "$dev_loop"

pkrootfs.bash

@@ -58,6 +58,11 @@ for d in dev boot etc; do
     $fakeroot -- chmod -vR 0644 "$cfg_dir_rootfs"/$d/*
 done
 
+# Copy DTB.
+if [ -n "$cfg_target_linux_dtb" ]; then
+    cp -v "$cfg_dir_toolchain/boot/$(basename $cfg_target_linux_dtb)" "$cfg_dir_rootfs/boot/board.dtb"
+fi
+
 # Write config vars.
 set | sort | grep ^cfg_ | egrep -v '^cfg_dir|^cfg_target|^cfg_host_|^cfg_toolchain|^cfg_rootfs_tar|^cfg_partitions' > "$cfg_dir_rootfs/etc/config"
 

rules/apr-util/default.bash

@@ -1,6 +1,6 @@
 version=\
 (
-    '1.5.2'
+    '1.5.3'
 )
 
 url=\

rules/apr/default.bash

@@ -1,6 +1,6 @@
 version=\
 (
-    '1.4.6'
+    '1.5.1'
 )
 
 url=\

rules/base/host.bash

@@ -25,4 +25,5 @@ requires=\
     'texinfo/host'
     'parted/host'
     'dosfstools/host'
+    'e2fsprogs/host'
 )

rules/bc/host.bash

@@ -0,0 +1,42 @@
+version=\
+(
+    '1.06'
+)
+
+url=\
+(
+    "http://ftp.gnu.org/gnu/bc/bc-$version.tar.gz"
+)
+
+md5=\
+(
+    'd44b5dddebd8a7a7309aea6c36fda117'
+)
+
+maintainer=\
+(
+    'Ricardo Martins <rasm@fe.up.pt>'
+)
+
+requires=\
+(
+    'flex/host'
+)
+
+configure()
+{
+    ./configure \
+        --prefix="$cfg_dir_toolchain" \
+        --disable-shared \
+        --enable-static
+}
+
+build()
+{
+    $cmd_make
+}
+
+host_install()
+{
+    $cmd_make install
+}

rules/busybox/default.bash

@@ -1,6 +1,6 @@
 version=\
 (
-    '1.22.0'
+    '1.22.1'
 )
 
 url=\
@@ -10,7 +10,7 @@ url=\
 
 md5=\
 (
-    'ac1881d1cdeb0729b22c663feaf1c663'
+    '337d1a15ab1cb1d4ed423168b1eb7d7e'
 )
 
 post_unpack()

rules/cdk/default.bash

@@ -1,16 +1,16 @@
 version=\
 (
-  "5.0-20120323"
+    '5.0-20140118'
 )
 
 url=\
 (
-  "ftp://invisible-island.net/cdk/cdk.tar.gz"
+    "ftp://invisible-island.net/cdk/cdk-$version.tgz"
 )
 
 md5=\
 (
-  "929969d06ce034e862976bb7d1a36b25"
+    'd2687e5558b6d6be5fd39328e5c86033'
 )
 
 requires=\
@@ -20,34 +20,34 @@ requires=\
 
 configure()
 {
-#        --target="${cfg_target_canonical}" \
-  ./configure \
-    --prefix="$cfg_dir_toolchain_sysroot/usr" \
-    --host="${cfg_target_canonical}" \
-    --build="${cfg_host_canonical}" \
+    #        --target="${cfg_target_canonical}" \
+    ./configure \
+        --prefix="$cfg_dir_toolchain_sysroot/usr" \
+        --host="${cfg_target_canonical}" \
+        --build="${cfg_host_canonical}" \
         --target="${cfg_target_canonical}" \
-    --with-ncursesw \
-    --with-shared   \
+        --with-ncursesw \
+        --with-shared   \
 
 }
 
 build()
 {
-  $cmd_make
+    $cmd_make
 }
 
 host_install()
 {
-  $cmd_make install
+    $cmd_make install
 }
 
 target_install()
 {
-  for f in "$cfg_dir_toolchain_sysroot/usr/lib/libcdk"* ; do
-    if [ -L "$f" ]; then
-      cp -av "$f" "$cfg_dir_rootfs/usr/lib"
-    else
-      $cmd_target_strip -v "$f" -o "$cfg_dir_rootfs/usr/lib/$(basename "$f")"
-    fi
-  done
+    for f in "$cfg_dir_toolchain_sysroot/usr/lib/libcdk"* ; do
+        if [ -L "$f" ]; then
+            cp -av "$f" "$cfg_dir_rootfs/usr/lib"
+        else
+            $cmd_target_strip -v "$f" -o "$cfg_dir_rootfs/usr/lib/$(basename "$f")"
+        fi
+    done
 }

rules/cmake/host.bash

@@ -1,6 +1,6 @@
 version=\
 (
-    "2.8.8"
+    "2.8.9"
 )
 
 version_major=\
@@ -15,7 +15,7 @@ url=\
 
 md5=\
 (
-    "ba74b22c788a0c8547976b880cd02b17"
+    "801f4c87f8b604f727df5bf1f05a59e7"
 )
 
 configure()
@@ -26,10 +26,12 @@ configure()
 
 build()
 {
+    # Remove the trailling 'ncurses' folder from the CURSES_INCLUDE_PATH
+    cat CMakeCache.txt | sed  '/^CURSES_INCLUDE_PATH/s/\/ncurses$/\//g' > CMakeCache.txt  &&
     $cmd_make
 }
 
 host_install()
 {
-    $cmd_make install
+    $cmd_make DESTDIR="$cfg_dir_toolchain" install
 }

rules/e2fsprogs/common.bash

@@ -0,0 +1,14 @@
+version=\
+(
+    '1.41.9'
+)
+
+url=\
+(
+    "http://downloads.sourceforge.net/e2fsprogs/e2fsprogs-$version.tar.gz"
+)
+
+md5=\
+(
+    '52f60a9e19a02f142f5546f1b5681927'
+)

rules/e2fsprogs/default.bash

@@ -1,20 +1,9 @@
-version=\
-(
-    '1.41.9'
-)
-
-url=\
-(
-    "http://downloads.sourceforge.net/e2fsprogs/e2fsprogs-$version.tar.gz"
-)
-
-md5=\
-(
-    '52f60a9e19a02f142f5546f1b5681927'
-)
+source "$pkg_common"
 
 configure()
 {
+    $cmd_make distclean
+
     export CC=$cmd_target_cc
     export CROSS_COMPILE=$cfg_target_canonical
     "../e2fsprogs-$version/configure" \

rules/e2fsprogs/host.bash

@@ -0,0 +1,22 @@
+source "$pkg_common"
+
+configure()
+{
+    $cmd_make distclean
+
+    "../e2fsprogs-$version/configure" \
+        --prefix="$cfg_dir_toolchain" \
+        --disable-shared \
+        --enable-static \
+        --disable-nls
+}
+
+build()
+{
+    $cmd_make
+}
+
+host_install()
+{
+    $cmd_make install
+}

rules/escc/default.bash

@@ -1,6 +1,6 @@
 version=\
 (
-    '1.0.4'
+    '1.0.5'
 )
 
 url=\
@@ -10,7 +10,7 @@ url=\
 
 md5=\
 (
-    'b9ee6a3d921643535c336b7c740b2c60'
+    '8400860f2daa98d559b1b9b6fcc630c2'
 )
 
 if [ -d "$cfg_dir_builds/linux/linux-"* ]; then

rules/filesystem/fs/etc/rc.d/mobile-internet

@@ -1,192 +0,0 @@
-#! /bin/sh
-#############################################################################
-# Copyright (C) 2012 Laboratório de Sistemas e Tecnologia Subaquática       #
-# Departamento de Engenharia Electrotécnica e de Computadores               #
-# Rua Dr. Roberto Frias, 4200-465 Porto, Portugal                           #
-#############################################################################
-# Author: Ricardo Martins                                                   #
-#############################################################################
-
-GSM_USER='vodafone'
-GSM_PASS='vodafone'
-GSM_APN='internet.vodafone.pt'
-GSM_MODE='AT\^SYSCFG=2,2,3fffffff,0,1'
-GSM_PIN='AT'
-
-FWL_EXT_ITF='ppp0'
-FWL_INT_ITF='eth0'
-
-CHAT_SCRIPT=$(cat <<EOF
-ABORT 'BUSY' \
-ABORT 'NO CARRIER' \
-ABORT 'VOICE' \
-ABORT 'NO DIALTONE' \
-ABORT 'NO DIAL TONE' \
-ABORT 'NO ANSWER' \
-ABORT 'DELAYED' \
-REPORT CONNECT \
-TIMEOUT 6 \
-'' 'ATQ0' \
-'OK-AT-OK' 'ATZ' \
-TIMEOUT 3 \
-'OK' '$GSM_PIN' \
-'OK-AT-OK' 'ATI' \
-'OK' 'ATZ' \
-'OK' 'ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0' \
-'OK' '$GSM_MODE' \
-'OK-AT-OK' 'AT+CGDCONT=1,\"IP\",\"$GSM_APN\"' \
-'OK' 'ATDT*99***1#' \
-TIMEOUT 30 \
-CONNECT ''
-EOF
-)
-
-modem_probe()
-{
-    nr="$(cat /proc/tty/driver/usbserial | grep GSM | head -n 1 | cut -f1 -d:)"
-    if [ -z "$nr" ]; then
-        echo ""
-    else
-        echo "/dev/ttyUSB$nr"
-    fi
-}
-
-ppp_start()
-{
-    modem="$(modem_probe)"
-
-    if [ -z "$modem" ]; then
-        echo -e "\nERROR: failed to find GSM modem.\n"
-        exit 1
-    fi
-
-    auth=''
-    if [ -n "$GSM_USER" ] && [ -n "$GSM_PASS" ]; then
-        auth="user \"$GSM_USER\" password \"$GSM_PASS\""
-    fi
-
-    echo -e "\n* Removing default route"
-
-    /sbin/route del default dev eth0 > /dev/null 2>&1
-
-    echo -e "\n* Starting PPP"
-
-    /usr/sbin/pppd \
-        "$modem" \
-        921600 \
-        $auth \
-        lock \
-        crtscts \
-        modem \
-        passive \
-        novj \
-        defaultroute \
-        noipdefault \
-        usepeerdns \
-        noauth \
-        hide-password \
-        persist \
-        holdoff 10 \
-        maxfail 2 \
-        updetach \
-        connect "/usr/sbin/chat -E -v -t15 $CHAT_SCRIPT" > /var/run/ppp.log 2>&1
-
-    if [ $? -ne 0 ]; then
-        echo -e "\nERROR: PPP failed to establish a connection.\n"
-        exit 1
-    fi
-
-    ip=$(ifconfig ppp0 | grep inet | cut -f2 -d: | cut -f1 -d' ')
-    echo "  - External IP is $ip"
-}
-
-ppp_stop()
-{
-    pid="$(cat /var/run/ppp0.pid 2> /dev/null)"
-
-    echo -e "\n* Stopping PPP"
-
-    if [ -z "$pid" ]; then
-        echo "  - Daemon is not running"
-        return 0
-    fi
-
-    for n in 1 2 3 4 5; do
-        if ! [ -d "/proc/$pid" ]; then
-            echo "  - Daemon stopped"
-            return 0
-        fi
-
-        echo "  - Sending SIGTERM to '$pid' (try $n)"
-        kill "$pid" > /dev/null 2>&1
-        sleep 2
-    done
-
-    kill -9 "$pid" > /dev/null 2>&1
-    echo "  - Daemon terminated"
-    return 0
-}
-
-nat_start()
-{
-    echo -e "\n* Enabling NAT"
-
-    echo "  - Enabling IP forwarding"
-    echo '1' > /proc/sys/net/ipv4/ip_forward
-    echo '1' > /proc/sys/net/ipv4/ip_dynaddr
-
-    echo "  - Flushing rules"
-    iptables -P INPUT ACCEPT
-    iptables -F INPUT
-    iptables -P OUTPUT ACCEPT
-    iptables -F OUTPUT
-    iptables -P FORWARD DROP
-    iptables -F FORWARD
-    iptables -t nat -F
-
-    echo "  - Installing rules"
-    iptables -A FORWARD -i "$FWL_EXT_ITF" -o "$FWL_INT_ITF" -m state --state ESTABLISHED,RELATED -j ACCEPT
-    iptables -A FORWARD -i "$FWL_EXT_ITF" -o "$FWL_EXT_ITF" -j ACCEPT
-    iptables -A FORWARD -i "$FWL_EXT_ITF" -o "$FWL_INT_ITF" -j ACCEPT
-    iptables -A FORWARD -i "$FWL_INT_ITF" -o "$FWL_EXT_ITF" -j ACCEPT
-    iptables -A FORWARD -j LOG
-    iptables -t nat -A POSTROUTING -o "$FWL_EXT_ITF" -j MASQUERADE
-}
-
-nat_stop()
-{
-    echo -e "\n* Disabling NAT"
-
-    echo "  - Disabling IP forwarding"
-    echo '0' > /proc/sys/net/ipv4/ip_forward
-    echo '0' > /proc/sys/net/ipv4/ip_dynaddr
-
-    echo "  - Flushing NAT rules"
-    iptables -P INPUT ACCEPT
-    iptables -F INPUT
-    iptables -P OUTPUT ACCEPT
-    iptables -F OUTPUT
-    iptables -P FORWARD DROP
-    iptables -F FORWARD
-    iptables -t nat -F
-}
-
-start()
-{
-    ppp_start && nat_start
-    if [ $? -eq 0 ]; then
-        echo -e "\n* Connection Established\n"
-    else
-        echo -e "\nERROR: failed to establish a connection\n"
-    fi
-}
-
-stop()
-{
-    nat_stop && ppp_stop
-    if [ $? -eq 0 ]; then
-        echo -e "\n* Service stopped\n"
-    else
-        echo -e "\nERROR: failed to stop service.\n"
-    fi
-}

rules/filesystem/fs/etc/rc.d/upgrade

@@ -109,24 +109,19 @@ kernel_upgrade()
     fi
 }
 
-bbb_boot_upgrade()
+uboot_part_upgrade()
 {
-    # Check if board is a BeagleBone black.
-    dmesg | grep -i 'machine model' | grep -i beaglebone
-    if [ $? -ne 0 ]; then
-        return 0
-    fi
+    label="$1"
+    dev="$2"
 
-    dev='/dev/mmcblk1p1'
-
-    echo -en '* BeagleBone Black: checking eMMC device... '
+    echo -en "* $label: probing bootloader partition... "
     if ! [ -b "$dev" ]; then
         echo 'not present'
         return 0
     fi
     echo 'present'
 
-    echo -en "* BeagleBone Black: mounting bootloader partition... "
+    echo -en "* $label: mounting bootloader partition... "
     mount -t vfat "$dev" /mnt > /dev/null 2>&1
     if [ $? -ne 0 ]; then
         echo "failed"
@@ -135,14 +130,12 @@ bbb_boot_upgrade()
     echo 'done'
 
     for f in MLO u-boot.img; do
-        if [ -f /mnt/MLO ]; then
-            echo -en "* BeagleBone Black: Replacing $f... "
-            cp "$base/.glued-new/boot/$f" /mnt
-            echo 'done'
-        fi
+        echo -en "* $label: Replacing $f... "
+        cp "$base/.glued-new/boot/$f" /mnt
+        echo 'done'
     done
 
-    echo -en "* BeagleBone Black: unmounting bootloader partition... "
+    echo -en "* $label: unmounting bootloader partition... "
     umount /mnt > /dev/null 2>&1
     if [ $? -ne 0 ]; then
         echo 'failed'
@@ -154,6 +147,30 @@ bbb_boot_upgrade()
     return 0
 }
 
+uboot_part_upgrade_check()
+{
+    # Check if board is a BeagleBone black.
+    dmesg | grep -i 'machine model' | grep -i beaglebone > /dev/null 2>&1
+    if [ $? -eq 0 ]; then
+        uboot_part_upgrade 'BeagleBone Black' '/dev/mmcblk1p1'
+        return 0
+    fi
+
+    # Check if board is a IGEPv2.
+    dmesg | grep -i 'machine model' | grep -i igepv2 > /dev/null 2>&1
+    if [ $? -eq 0 ]; then
+        uboot_part_upgrade 'IGEPv2' '/dev/mmcblk0p1'
+        return 0
+    fi
+    grep "IGEP v2" /proc/cpuinfo > /dev/null 2>&1
+    if [ $? -eq 0 ]; then
+        uboot_part_upgrade 'IGEPv2' '/dev/mmcblk0p1'
+        return 0
+    fi
+
+    return 0
+}
+
 old_move()
 {
     echo "* Mounting rootfs read-write..."
@@ -201,7 +218,7 @@ start()
     version || return 1
     kernel_dst || return 1
     new_unpack || return 1
-    bbb_boot_upgrade || return 1
+    uboot_part_upgrade_check || return 1
     kernel_upgrade || return 1
     old_move || return 1
 }

rules/gcc/patches-4.6.3/00-libjava-i786.patch

@@ -1,11 +0,0 @@
---- gcc-4.6.3/libjava/configure.host	2010-12-06 00:50:04.000000000 +0000
-+++ gcc-4.6.3.rasm/libjava/configure.host	2012-10-30 20:29:06.192935517 +0000
-@@ -115,7 +115,7 @@
-   mips*-*)
- 	libgcj_interpreter=yes
- 	;;
--  i686-*|i586-*|i486-*|i386-*)
-+  i786-*|i686-*|i586-*|i486-*|i386-*)
- 	sysdeps_dir=i386
- 	# With -fomit-frame-pointer -maccumulate-outgoing-args (implied),
- 	# the .text section of libgcj.so is 30k larger, and the .eh_frame

rules/gcc/patches-4.6.3/01-lib64-to-lib.patch

@@ -1,14 +0,0 @@
-diff -Nru gcc-4.6.3/gcc/config/i386/t-linux64 gcc-4.6.3.rasm/gcc/config/i386/t-linux64
---- gcc-4.6.3/gcc/config/i386/t-linux64	2009-04-21 20:03:23.000000000 +0100
-+++ gcc-4.6.3.rasm/gcc/config/i386/t-linux64	2012-12-11 19:01:42.549964639 +0000
-@@ -24,8 +24,8 @@
- # MULTILIB_OSDIRNAMES according to what is found on the target.
- 
- MULTILIB_OPTIONS = m64/m32
--MULTILIB_DIRNAMES = 64 32 
--MULTILIB_OSDIRNAMES = ../lib64 $(if $(wildcard $(shell echo $(SYSTEM_HEADER_DIR))/../../usr/lib32),../lib32,../lib)
-+MULTILIB_DIRNAMES = 64 32
-+MULTILIB_OSDIRNAMES = ../lib $(if $(wildcard $(shell echo $(SYSTEM_HEADER_DIR))/../../usr/lib32),../lib32,../lib)
- 
- LIBGCC = stmp-multilib
- INSTALL_LIBGCC = install-multilib

rules/gnuplot/default.bash

@@ -1,41 +1,41 @@
 version=\
 (
-  "4.6.1"
+    '4.6.5'
 )
 
 url=\
 (
-  "ftp://ftp.dante.de/pub/tex/graphics/gnuplot/${version}/gnuplot-${version}.tar.gz"
+    "http://downloads.sourceforge.net/gnuplot/gnuplot/$version/gnuplot-$version.tar.gz"
 )
 
 md5=\
 (
-  "4c9a06461f402482c30cf94e267eb877"
+    '9a476b21f74bd99c876f1509d731a0f9'
 )
 
 configure()
 {
-  ./configure \
-   --prefix="${cfg_dir_toolchain_sysroot}/usr" \
-   --target="$cfg_target_canonical" \
-   --host="$cfg_target_canonical" \
-   --build="$cfg_host_canonical" \
-   --disable-history-file \
-   --without-x \
-   --disable-raise-console \
-   --disable-mouse \
-   --without-tutorial \
-   --without-demo \
-   --disable-demo \
-   --without-row-help \
-   --disable-history-file \
-   --without-lisp-files \
-   --disable-wxwidgets \
-   --without-lua \
-   --without-latex \
-   --without-cairo
+    ./configure \
+        --prefix="${cfg_dir_toolchain_sysroot}/usr" \
+        --target="$cfg_target_canonical" \
+        --host="$cfg_target_canonical" \
+        --build="$cfg_host_canonical" \
+        --disable-history-file \
+        --without-x \
+        --disable-raise-console \
+        --disable-mouse \
+        --without-tutorial \
+        --without-demo \
+        --disable-demo \
+        --without-row-help \
+        --disable-history-file \
+        --without-lisp-files \
+        --disable-wxwidgets \
+        --without-lua \
+        --without-latex \
+        --without-cairo
 
-  sed -i "s#demo ##g" Makefile
+    sed -i "s#demo ##g" Makefile
 }
 
 build()
@@ -50,8 +50,6 @@ host_install()
 
 target_install()
 {
-  $cmd_target_strip -v "$cfg_dir_toolchain_sysroot/usr/bin/gnuplot" -o 	"$cfg_dir_rootfs/usr/bin/gnuplot"
-  $cmd_cp "$cfg_dir_toolchain_sysroot/usr/share/gnuplot" 		"$cfg_dir_rootfs/usr/share"
+    $cmd_target_strip -v "$cfg_dir_toolchain_sysroot/usr/bin/gnuplot" -o 	"$cfg_dir_rootfs/usr/bin/gnuplot"
+    $cmd_cp "$cfg_dir_toolchain_sysroot/usr/share/gnuplot" 		"$cfg_dir_rootfs/usr/share"
 }
-
-

rules/gpsd/default.bash

@@ -1,45 +0,0 @@
-version=\
-(
-    "2.95"
-)
-
-url=\
-(
-    "http://download.berlios.de/gpsd/gpsd-$version.tar.gz"
-)
-
-md5=\
-(
-    "12535a9ed9fecf9ea2c5bdc9840da5ae"
-)
-
-maintainer=\
-(
-    "Ricardo Martins <rasm@fe.up.pt>"
-)
-
-configure()
-{
-    ../gpsd-$version/configure \
-        --prefix="$cfg_dir_rootfs/usr" \
-        --target=$cfg_target_canonical \
-        --host=$cfg_target_canonical \
-        --build=$cfg_host_canonical \
-        --disable-dbus \
-        --disable-libQgpsmm
-}
-
-build()
-{
-    $cmd_make
-}
-
-target_install()
-{
-    $cmd_target_strip .libs/gpsd -o $cfg_dir_rootfs/usr/bin/gpsd &&
-    for l in .libs/libgps*so*; do
-        $cmd_target_strip "$l" -o $cfg_dir_rootfs/usr/lib/"$(basename $l)"
-    done
-
-    cp "$pkg_dir"/services/gpsd "$cfg_dir_rootfs/etc/rc.d"
-}

rules/gpsd/services/gpsd

@@ -1,14 +0,0 @@
-# Configuration Parameters
-# cfg_gpsd_dev: serial port device.
-# cfg_gpsd_baud: serial port baud rate.
-
-start()
-{
-    stty -F "$cfg_gpsd_dev" "$cfg_gpsd_baud"
-    gpsd -n "$cfg_gpsd_dev"
-}
-
-stop()
-{
-    killall gpsd
-}

rules/libav/default.bash

@@ -0,0 +1,39 @@
+version=\
+(
+    "10.1"
+)
+
+url=\
+(
+    "http://libav.org/releases/libav-$version.tar.gz"
+)
+
+md5=\
+(
+    99c123b9ba9c0ff8c6bfd67a635f99ac
+)
+
+configure()
+{
+    ./configure \
+        --sysroot="$cfg_dir_toolchain_sysroot" \
+        --prefix="$cfg_dir_rootfs/usr" \
+        --cross-prefix="$cfg_target_canonical-" \
+        --target-os="linux" \
+        --enable-memalign-hack \
+        --enable-shared \
+        --enable-pic \
+        --enable-gpl \
+        --arch=$cfg_architecture
+}
+
+build()
+{
+    $cmd_make
+}
+
+target_install()
+{
+    $cmd_make \
+        install
+}

rules/libpcap/default.bash

@@ -1,6 +1,6 @@
 version=\
 (
-    "1.1.1"
+    "1.6.1"
 )
 
 url=\
@@ -10,7 +10,7 @@ url=\
 
 md5=\
 (
-    "1bca27d206970badae248cfa471bbb47"
+    "5eb05edf6b6c6e63d536d1c9fbfb2f7c"
 )
 
 maintainer=\
@@ -26,9 +26,12 @@ requires=\
 
 post_unpack()
 {
-    for patch in "$pkg_dir"/patches/*; do
-        patch -p1 < "$patch" || return 1
-    done
+    if [ -d "$pkg_dir"/patches/${version} ];
+    then
+	for patch in "$pkg_dir"/patches/${version}/*; do
+            patch -p1 < "$patch" || return 1
+	done
+    fi
 }
 
 configure()
@@ -56,7 +59,10 @@ build()
 
 host_install()
 {
-    $cmd_make install
+    $cmd_make install &&
+    mv -v \
+        "$cfg_dir_toolchain_sysroot/usr/bin/pcap-config" \
+        "$cfg_dir_toolchain/bin/$cfg_target_canonical-pcap-config"
 }
 
 target_install()

rules/libpcap/patches/10_shared_lib.diff

@@ -1,180 +0,0 @@
-Debian-specific modifications to the upstream Makefile.in to
-build a shared library.
-
----
- Makefile.in |   49 +++++++++++++++++++++++++++++++++++++++++--------
- aclocal.m4  |    4 ++--
- configure   |    4 ++--
- 3 files changed, 45 insertions(+), 12 deletions(-)
-
---- a/Makefile.in
-+++ b/Makefile.in
-@@ -40,6 +40,14 @@
- srcdir = @srcdir@
- VPATH = @srcdir@
- 
-+# some defines for shared library compilation
-+MAJ=1.0
-+LIBVERSION=1
-+LIBNAME=pcap
-+LIBRARY=lib$(LIBNAME).a
-+SOLIBRARY=lib$(LIBNAME).so
-+SHAREDLIB=$(SOLIBRARY).$(LIBVERSION)
-+
- #
- # You shouldn't need to edit anything below.
- #
-@@ -59,6 +67,7 @@
- 
- # Standard CFLAGS
- CFLAGS = $(CCOPT) $(INCLS) $(DEFS)
-+CFLAGS_SHARED = -shared -Wl,-soname,$(SOLIBRARY).$(MAJ)
- 
- INSTALL = @INSTALL@
- INSTALL_PROGRAM = @INSTALL_PROGRAM@
-@@ -78,7 +87,11 @@
- # problem if you don't own the file but can write to the directory.
- .c.o:
- 	@rm -f $@
--	$(CC) $(CFLAGS) -c $(srcdir)/$*.c
-+	$(CC) $(CFLAGS) -c -o $@ $(srcdir)/$*.c
-+
-+%_pic.o: %.c
-+	@rm -f $@
-+	$(CC) -fPIC $(CFLAGS) -c -o $@ $(srcdir)/$*.c
- 
- PSRC =	pcap-@V_PCAP@.c @USB_SRC@ @BT_SRC@ @CAN_SRC@
- FSRC =  fad-@V_FINDALLDEVS@.c
-@@ -94,6 +107,7 @@
- # We would like to say "OBJ = $(SRC:.c=.o)" but Ultrix's make cannot
- # hack the extra indirection
- OBJ =	$(PSRC:.c=.o) $(FSRC:.c=.o) $(CSRC:.c=.o) $(SSRC:.c=.o) $(GENSRC:.c=.o) $(LIBOBJS)
-+OBJ_PIC = $(PSRC:.c=_pic.o) $(FSRC:.c=_pic.o) $(CSRC:.c=_pic.o) $(SSRC:.c=_pic.o) $(GENSRC:.c=_pic.o)
- PUBHDR = \
- 	pcap.h \
- 	pcap-bpf.h \
-@@ -131,7 +145,7 @@
- 
- CLEANFILES = $(OBJ) libpcap.* filtertest findalldevstest selpolltest \
- 	opentest $(PROG)-`cat $(srcdir)/VERSION`.tar.gz $(GENSRC) $(GENHDR) \
--	lex.yy.c pcap-config
-+	lex.yy.c pcap-config $(OBJ_PIC)
- 
- MAN1 = pcap-config.1
- 
-@@ -331,7 +345,7 @@
- 	ar rc $@ $(OBJ) $(ADDLARCHIVEOBJS)
- 	$(RANLIB) $@
- 
--shared: libpcap.$(DYEXT)
-+shared: $(SHAREDLIB)
- 
- libpcap.so: $(OBJ)
- 	@rm -f $@
-@@ -409,6 +423,13 @@
- #
- libpcap.none:
- 
-+$(SHAREDLIB): $(OBJ_PIC)
-+	-@rm -f $@
-+	-@rm -f $(SOLIBRARY) $(SOLIBRARY).$(MAJ)
-+	$(CC) $(CFLAGS_SHARED) -o $(SHAREDLIB) $(OBJ_PIC) -lc
-+	ln -s $(SHAREDLIB) $(SOLIBRARY).$(MAJ)
-+	ln -s $(SOLIBRARY).$(MAJ) $(SOLIBRARY)
-+
- scanner.c: $(srcdir)/scanner.l
- 	@rm -f $@
- 	$(srcdir)/runlex.sh $(LEX) -o$@ $<
-@@ -416,6 +437,9 @@
- scanner.o: scanner.c tokdefs.h
- 	$(CC) $(CFLAGS) -c scanner.c
- 
-+scanner_pic.o: scanner.c tokdefs.h
-+	$(CC) -fPIC $(CFLAGS) -o $@ -c scanner.c
-+
- pcap.o: version.h
- 
- tokdefs.h: grammar.c
-@@ -429,9 +453,17 @@
- 	@rm -f $@
- 	$(CC) $(CFLAGS) -Dyylval=pcap_lval -c grammar.c
- 
-+grammar_pic.o: grammar.c
-+	@rm -f $@
-+	$(CC) -fPIC $(CFLAGS) -Dyylval=pcap_lval -o $@ -c grammar.c 
-+
- version.o: version.c
- 	$(CC) $(CFLAGS) -c version.c
- 
-+version_pic.o: version.c
-+	$(CC) -fPIC $(CFLAGS) -c version.c -o $@
-+
-+
- snprintf.o: $(srcdir)/missing/snprintf.c
- 	$(CC) $(CFLAGS) -o $@ -c $(srcdir)/missing/snprintf.c
- 
-@@ -469,6 +501,9 @@
- bpf_filter.o: bpf_filter.c
- 	$(CC) $(CFLAGS) -c bpf_filter.c
- 
-+bpf_filter_pic.o: bpf_filter.c
-+	$(CC) -fPIC $(CFLAGS) -c bpf_filter.c -o $@
-+
- #
- # Generate the pcap-config script.
- #
-@@ -565,11 +600,9 @@
- install-shared-so: libpcap.so
- 	[ -d $(DESTDIR)$(libdir) ] || \
- 	    (mkdir -p $(DESTDIR)$(libdir); chmod 755 $(DESTDIR)$(libdir))
--	VER=`cat $(srcdir)/VERSION`; \
--	MAJOR_VER=`sed 's/\([0-9][0-9]*\)\..*/\1/' $(srcdir)/VERSION`; \
--	$(INSTALL_PROGRAM) libpcap.so.$$VER $(DESTDIR)$(libdir)/libpcap.so.$$VER; \
--	ln -sf libpcap.so.$$VER $(DESTDIR)$(libdir)/libpcap.so.$$MAJOR_VER; \
--	ln -sf libpcap.so.$$MAJOR_VER $(DESTDIR)$(libdir)/libpcap.so
-+	$(INSTALL_DATA) $(SHAREDLIB) $(DESTDIR)$(libdir)/
-+	ln -sf $(SHAREDLIB) $(DESTDIR)$(libdir)/$(SOLIBRARY).$(MAJ)
-+	ln -sf $(SOLIBRARY).$(MAJ) $(DESTDIR)$(libdir)/$(SOLIBRARY)
- install-shared-dylib: libpcap.dylib
- 	[ -d $(DESTDIR)$(libdir) ] || \
- 	    (mkdir -p $(DESTDIR)$(libdir); chmod 755 $(DESTDIR)$(libdir))
---- a/aclocal.m4
-+++ b/aclocal.m4
-@@ -245,7 +245,7 @@
- 		    # or accepts command-line arguments like
- 		    # those the GNU linker accepts.
- 		    #
--		    V_CCOPT="$V_CCOPT -fpic"
-+		    V_CCOPT="$V_CCOPT"
- 		    V_SONAME_OPT="-Wl,-soname,"
- 		    V_RPATH_OPT="-Wl,-rpath,"
- 		    ;;
-@@ -308,7 +308,7 @@
- 		    #
- 		    # "cc" is GCC.
- 		    #
--		    V_CCOPT="$V_CCOPT -fpic"
-+		    V_CCOPT="$V_CCOPT"
- 		    V_SHLIB_CMD="\$(CC)"
- 		    V_SHLIB_OPT="-shared"
- 		    V_SONAME_OPT="-Wl,-soname,"
---- a/configure
-+++ b/configure
-@@ -3229,7 +3229,7 @@
- 		    # or accepts command-line arguments like
- 		    # those the GNU linker accepts.
- 		    #
--		    V_CCOPT="$V_CCOPT -fpic"
-+		    V_CCOPT="$V_CCOPT"
- 		    V_SONAME_OPT="-Wl,-soname,"
- 		    V_RPATH_OPT="-Wl,-rpath,"
- 		    ;;
-@@ -3292,7 +3292,7 @@
- 		    #
- 		    # "cc" is GCC.
- 		    #
--		    V_CCOPT="$V_CCOPT -fpic"
-+		    V_CCOPT="$V_CCOPT"
- 		    V_SHLIB_CMD="\$(CC)"
- 		    V_SHLIB_OPT="-shared"
- 		    V_SONAME_OPT="-Wl,-soname,"

rules/libpcap/patches/15_linker_script.diff

@@ -1,103 +0,0 @@
-Use a linker script.
----
- Makefile.in |    2 -
- libpcap.lds |   83 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
- 2 files changed, 84 insertions(+), 1 deletion(-)
-
---- a/Makefile.in
-+++ b/Makefile.in
-@@ -67,7 +67,7 @@
- 
- # Standard CFLAGS
- CFLAGS = $(CCOPT) $(INCLS) $(DEFS)
--CFLAGS_SHARED = -shared -Wl,-soname,$(SOLIBRARY).$(MAJ)
-+CFLAGS_SHARED = -shared -Wl,-soname,$(SOLIBRARY).$(MAJ) -Wl,--version-script=libpcap.lds
- 
- INSTALL = @INSTALL@
- INSTALL_PROGRAM = @INSTALL_PROGRAM@
---- /dev/null
-+++ b/libpcap.lds
-@@ -0,0 +1,83 @@
-+{
-+  global:
-+    bpf_dump;
-+    bpf_filter;
-+    bpf_image;
-+    bpf_validate;
-+    eproto_db;
-+    pcap_breakloop;
-+    pcap_can_set_rfmon;
-+    pcap_close;
-+    pcap_compile;
-+    pcap_compile_nopcap;
-+    pcap_datalink;
-+    pcap_datalink_name_to_val;
-+    pcap_datalink_val_to_description;
-+    pcap_datalink_val_to_name;
-+    pcap_dispatch;
-+    pcap_dump;
-+    pcap_dump_close;
-+    pcap_dump_file;
-+    pcap_dump_flush;
-+    pcap_dump_fopen;
-+    pcap_dump_ftell;
-+    pcap_dump_open;
-+    pcap_ether_aton;
-+    pcap_ether_hostton;
-+    pcap_file;
-+    pcap_fileno;
-+    pcap_findalldevs;
-+    pcap_fopen_offline;
-+    pcap_freealldevs;
-+    pcap_freecode;
-+    pcap_get_selectable_fd;
-+    pcap_geterr;
-+    pcap_getnonblock;
-+    pcap_inject;
-+    pcap_is_swapped;
-+    pcap_lib_version;
-+    pcap_list_datalinks;
-+    pcap_lookupdev;
-+    pcap_lookupnet;
-+    pcap_loop;
-+    pcap_major_version;
-+    pcap_minor_version;
-+    pcap_nametoaddr;
-+    pcap_nametoaddrinfo;
-+    pcap_nametoeproto;
-+    pcap_nametollc;
-+    pcap_nametonetaddr;
-+    pcap_nametoport;
-+    pcap_nametoportrange;
-+    pcap_nametoproto;
-+    pcap_next;
-+    pcap_next_etherent;
-+    pcap_next_ex;
-+    pcap_open_dead;
-+    pcap_open_live;
-+    pcap_open_offline;
-+    pcap_perror;
-+    pcap_sendpacket;
-+    pcap_set_datalink;
-+    pcap_setdirection;
-+    pcap_setfilter;
-+    pcap_setnonblock;
-+    pcap_snapshot;
-+    pcap_stats;
-+    pcap_statustostr;
-+    pcap_strerror;
-+    pcap_version;
-+    /* introduced in pcap 1.0 */
-+    pcap_activate;
-+    pcap_create;
-+    pcap_datalink_ext;
-+    pcap_free_datalinks;
-+    pcap_offline_filter;
-+    pcap_set_buffer_size;
-+    pcap_set_promisc;
-+    pcap_set_rfmon;
-+    pcap_set_snaplen;
-+    pcap_set_timeout;
-+  local:
-+    *;
-+};

rules/libpcap/patches/30_man_fixes.diff

@@ -1,17 +0,0 @@
-Misc. fixes to the upstream man page.
-
----
- pcap.3pcap.in |    2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
---- a/pcap.3pcap.in
-+++ b/pcap.3pcap.in
-@@ -363,7 +363,7 @@
- script or some other configuration script to check whether the libpcap
- 1.0 APIs are available and use them only if they are.
- .SH SEE ALSO
--autoconf(1), tcpdump(1), tcpslice(1), pcap-filter(@MAN_MISC_INFO@), pfconfig(8),
-+autoconf(1), tcpdump(8), tcpslice(1), pcap-filter(@MAN_MISC_INFO@), pfconfig(8),
- usermod(1M)
- .SH AUTHORS
- The original authors of libpcap are:

rules/libpcap/patches/40_fix_bus_usb_path.diff

@@ -1,16 +0,0 @@
-Fix USB bus path; /proc/bus/usb is deprecated.
----
- pcap-usb-linux.c |    2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
---- a/pcap-usb-linux.c
-+++ b/pcap-usb-linux.c
-@@ -68,7 +68,7 @@
- #define USB_TEXT_DIR_OLD "/sys/kernel/debug/usbmon"
- #define USB_TEXT_DIR "/sys/kernel/debug/usb/usbmon"
- #define SYS_USB_BUS_DIR "/sys/bus/usb/devices"
--#define PROC_USB_BUS_DIR "/proc/bus/usb"
-+#define PROC_USB_BUS_DIR "/dev/bus/usb"
- #define USB_LINE_LEN 4096
- 
- #if __BYTE_ORDER == __LITTLE_ENDIAN

rules/libpcap/patches/50_kfreebsd.diff

@@ -1,147 +0,0 @@
-Support for GNU/kFreeBSD, by Aurelien Jarno and others.
----
- configure    |   62 ++---------------------------------------------------------
- configure.in |   19 ++----------------
- 2 files changed, 6 insertions(+), 75 deletions(-)
-
---- a/configure.in
-+++ b/configure.in
-@@ -104,6 +104,7 @@
- dnl
- AC_CHECK_HEADERS(sys/ioccom.h sys/sockio.h limits.h paths.h)
- AC_CHECK_HEADERS(net/pfvar.h, , , [#include <sys/types.h>
-+#include <net/if_pflog.h>
- #include <sys/socket.h>
- #include <net/if.h>])
- if test "$ac_cv_header_net_pfvar_h" = yes; then
-@@ -304,7 +305,7 @@
- 	#
- 	V_PCAP=bpf
- 	AC_DEFINE(HAVE_CLONING_BPF,1,[define if you have a cloning BPF device])
--elif test -r /dev/bpf0 ; then
-+elif test -r /dev/bpf0 || test -r /usr/include/net/bpf.h ; then
- 	V_PCAP=bpf
- elif test -r /usr/include/net/pfilt.h ; then
- 	V_PCAP=pf
-@@ -464,20 +465,6 @@
- 	#
- 	AC_CHECK_HEADERS(net/if_media.h)
- 
--	AC_MSG_CHECKING(whether the system supports zerocopy BPF)
--	AC_TRY_COMPILE(
--	    [#include <sys/socket.h>
--	    #include <sys/ioctl.h>
--	    #include <net/if.h>
--	    #include <net/bpf.h>],
--	    [return (BIOCROTZBUF + BPF_BUFMODE_ZBUF);],
--	    [  
--		AC_MSG_RESULT(yes)
--		AC_DEFINE(HAVE_ZEROCOPY_BPF, 1,
--		[define if the system supports zerocopy BPF])
--	    ],
--	    AC_MSG_RESULT(no))
--
- 	    #
- 	    # Check whether we have struct BPF_TIMEVAL.
- 	    #
-@@ -1234,7 +1221,7 @@
- 	MAN_MISC_INFO=5
- 	;;
- 
--linux*|freebsd*|netbsd*|openbsd*|dragonfly*)
-+linux*|freebsd*|netbsd*|openbsd*|dragonfly*|kfreebsd*)
- 	DYEXT="so"
- 
- 	#
---- a/configure
-+++ b/configure
-@@ -5440,6 +5440,7 @@
- cat >>conftest.$ac_ext <<_ACEOF
- /* end confdefs.h.  */
- #include <sys/types.h>
-+#include <net/if_pflog.h>
- #include <sys/socket.h>
- #include <net/if.h>
- 
-@@ -6923,7 +6924,7 @@
- #define HAVE_CLONING_BPF 1
- _ACEOF
- 
--elif test -r /dev/bpf0 ; then
-+elif test -r /dev/bpf0 || test -r /usr/include/net/bpf.h ; then
- 	V_PCAP=bpf
- elif test -r /usr/include/net/pfilt.h ; then
- 	V_PCAP=pf
-@@ -7665,63 +7666,6 @@
- 
- done
- 
--
--	{ echo "$as_me:$LINENO: checking whether the system supports zerocopy BPF" >&5
--echo $ECHO_N "checking whether the system supports zerocopy BPF... $ECHO_C" >&6; }
--	cat >conftest.$ac_ext <<_ACEOF
--/* confdefs.h.  */
--_ACEOF
--cat confdefs.h >>conftest.$ac_ext
--cat >>conftest.$ac_ext <<_ACEOF
--/* end confdefs.h.  */
--#include <sys/socket.h>
--	    #include <sys/ioctl.h>
--	    #include <net/if.h>
--	    #include <net/bpf.h>
--int
--main ()
--{
--return (BIOCROTZBUF + BPF_BUFMODE_ZBUF);
--  ;
--  return 0;
--}
--_ACEOF
--rm -f conftest.$ac_objext
--if { (ac_try="$ac_compile"
--case "(($ac_try" in
--  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
--  *) ac_try_echo=$ac_try;;
--esac
--eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
--  (eval "$ac_compile") 2>conftest.er1
--  ac_status=$?
--  grep -v '^ *+' conftest.er1 >conftest.err
--  rm -f conftest.er1
--  cat conftest.err >&5
--  echo "$as_me:$LINENO: \$? = $ac_status" >&5
--  (exit $ac_status); } && {
--	 test -z "$ac_c_werror_flag" ||
--	 test ! -s conftest.err
--       } && test -s conftest.$ac_objext; then
--
--		{ echo "$as_me:$LINENO: result: yes" >&5
--echo "${ECHO_T}yes" >&6; }
--
--cat >>confdefs.h <<\_ACEOF
--#define HAVE_ZEROCOPY_BPF 1
--_ACEOF
--
--
--else
--  echo "$as_me: failed program was:" >&5
--sed 's/^/| /' conftest.$ac_ext >&5
--
--	{ echo "$as_me:$LINENO: result: no" >&5
--echo "${ECHO_T}no" >&6; }
--fi
--
--rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
--
- 	    #
- 	    # Check whether we have struct BPF_TIMEVAL.
- 	    #
-@@ -9607,7 +9551,7 @@
- 	MAN_MISC_INFO=5
- 	;;
- 
--linux*|freebsd*|netbsd*|openbsd*|dragonfly*)
-+linux*|freebsd*|netbsd*|openbsd*|dragonfly*|kfreebsd*)
- 	DYEXT="so"
- 
- 	#

rules/libpng/default.bash

@@ -1,6 +1,6 @@
 version=\
 (
-    '1.6.8'
+    '1.6.12'
 )
 
 url=\
@@ -10,7 +10,7 @@ url=\
 
 md5=\
 (
-    '51ce71a1642cdde1f4485a7ff82193c0'
+    'ee752da8aa75076500e4cf31318e636e'
 )
 
 configure()

rules/libswiftnav/default.bash

@@ -0,0 +1,78 @@
+version=\
+(
+    '0.11'
+)
+
+url=\
+(
+    "https://github.com/swift-nav/libswiftnav/archive/v$version.tar.gz"
+)
+
+md5=\
+(
+    '54e4d1bf00f116147f28cb92520e7e7d'
+)
+
+maintainer=\
+(
+    'Kristian Klausen <kristian.klausen@itk.ntnu.no>'
+)
+
+requires=\
+(
+    'cmake/host'
+)
+
+post_unpack()
+{
+    patches=$(ls "$pkg_dir/patches/$version/"*.patch\
+	"$cfg_dir_system/patches/libswiftnav/"*.patch 2>/dev/null)
+    if [ -n "$patches" ]; then
+        cat $patches | patch -p1
+    fi
+}
+
+configure()
+{
+
+
+    mkdir -p ../build &&
+    cd ../build
+    echo "$cmd_target_cc" 
+    ${cfg_dir_toolchain}/usr/local/bin/cmake \
+        -DCROSS="$cmd_target_cc" \
+	    -DCMAKE_BUILD_TYPE=Release \
+	    -DCMAKE_C_COMPILER="${cmd_target_cc}"                         \
+        -DCMAKE_CXX_COMPILER="${cmd_target_cxx}"                      \
+        -DCMAKE_FIND_ROOT_PATH="${cfg_dir_toolchain_sysroot}/usr" \
+        -DCMAKE_FIND_ROOT_PATH_MODE_INCLUDE=ONLY \
+        -DCMAKE_INSTALL_PREFIX="$cfg_dir_toolchain_sysroot/usr" \
+        -DCMAKE_C_FLAGS="${cfg_target_gcc_flags} -fPIC" \
+        -DCMAKE_SYSTEM_NAME="Linux" \
+        -DCMAKE_SYSTEM_PROCESSOR="$cfg_architecture" \
+        "../libswiftnav-$version"
+
+}
+
+build()
+{
+    cd  ${pkg_build_dir}/../build &&
+    $cmd_make
+}
+
+host_install()
+{
+    cd  ${pkg_build_dir}/../build &&
+    $cmd_make install
+}
+
+target_install()
+{
+    for f in "$cfg_dir_toolchain_sysroot/usr/lib/"libswiftnav*so; do
+        if [ -L "$f" ]; then
+            cp -vd "$f" "$cfg_dir_rootfs/lib"
+        else
+            $cmd_target_strip -v "$f" -o "$cfg_dir_rootfs/lib/$(basename "$f")"
+        fi
+    done
+}

rules/linux/common.bash

@@ -1,108 +0,0 @@
-post_unpack()
-{
-    patches=$(ls "$pkg_dir/patches-$version/"*.patch\
-	"$cfg_dir_system/patches/linux/patches-${version}/"*.patch 2>/dev/null)
-    if [ -n "$patches" ]; then
-        cat $patches | patch -p1
-    fi
-
-    if [ -d "$cfg_dir_toolchain/firmware" ]; then
-        tar -C "$cfg_dir_toolchain/firmware" -c -v -f - . | tar -C firmware -x -v -f -
-    fi
-}
-
-refresh()
-{
-    for rule in configure build target_install; do
-        if [ "$cfg_dir_system/cfg/linux-${version}.cfg" -nt "$cfg_dir_builds/linux/$pkg_var/.$rule" ]; then
-            rm "$cfg_dir_builds/linux/$pkg_var/.$rule"
-        fi
-    done
-}
-
-configure()
-{
-    $cmd_make \
-        ARCH=${cfg_target_linux} \
-        mrproper &&
-
-    cp "$cfg_dir_system/cfg/linux-${version}.cfg" .config &&
-
-    yes '' | $cmd_make \
-        CROSS_COMPILE=${cfg_target_canonical}- \
-        ARCH=${cfg_target_linux} \
-        oldconfig
-}
-
-build()
-{
-    $cmd_make \
-        CROSS_COMPILE=$cfg_target_canonical- \
-        ARCH=$cfg_target_linux &&
-    $cmd_make \
-        CROSS_COMPILE=$cfg_target_canonical- \
-        ARCH=$cfg_target_linux \
-        modules &&
-
-    if [ "$(basename $cfg_target_linux_kernel)" = 'uImage' ]; then
-        $cmd_make \
-            CROSS_COMPILE=$cfg_target_canonical- \
-            ARCH=$cfg_target_linux \
-            uImage
-    fi
-
-    # Compressed image.
-    if [ "$(basename $cfg_target_linux_kernel)" = 'zImage' ]; then
-        $cmd_make \
-            CROSS_COMPILE=$cfg_target_canonical- \
-            ARCH=$cfg_target_linux \
-            zImage
-    fi
-
-    # Device tree blob.
-    if [ -n "$cfg_target_linux_dtb" ]; then
-        $cmd_make \
-            CROSS_COMPILE=$cfg_target_canonical- \
-            ARCH=$cfg_target_linux \
-            dtbs
-    fi
-
-    if [ -n "${cfg_target_linux_size}" ]; then
-        dd if="$cfg_target_linux_kernel" of="${cfg_target_linux_kernel}.padded" \
-            ibs="${cfg_target_linux_size}" conv=sync &&
-        mv "${cfg_target_linux_kernel}.padded" "${cfg_target_linux_kernel}"
-    fi
-}
-
-target_install()
-{
-    kernel="$cfg_dir_base/${cfg_sys_family}/glued-${cfg_glued_version}-${cfg_sys_family}-kernel.bin"
-
-    if [ -n "$(file "$cfg_target_linux_kernel" | grep ELF)" ]; then
-        strip="$(echo $cfg_dir_toolchain/bin/*-strip)"
-        $strip -s -R .comment "$cfg_target_linux_kernel"
-    fi
-
-    # Kernel image.
-    if [ -n "$cfg_target_linux_kernel" ]; then
-        cp -v "$cfg_target_linux_kernel" "$kernel"
-        cp -v "$cfg_target_linux_kernel" "$cfg_dir_rootfs/boot/kernel"
-    fi
-
-    # Device tree blob.
-    if [ -n "$cfg_target_linux_dtb" ]; then
-        cp -v "$cfg_target_linux_dtb" "$cfg_dir_rootfs/boot/board.dtb"
-    fi
-
-    $cmd_make \
-        CROSS_COMPILE="$cfg_target_canonical-" \
-        ARCH="$cfg_target_linux" \
-        INSTALL_MOD_PATH="$cfg_dir_rootfs/usr" \
-        modules_install
-
-    $cmd_make \
-        CROSS_COMPILE="$cfg_target_canonical-" \
-        ARCH="$cfg_target_linux" \
-        INSTALL_MOD_PATH="$cfg_dir_rootfs/usr" \
-        firmware_install
-}

rules/linux/default.bash

@@ -1,8 +1,6 @@
-source "$pkg_common"
-
 version=\
 (
-    '3.13.11'
+    '3.14.16'
 )
 
 url=\
@@ -12,7 +10,7 @@ url=\
 
 md5=\
 (
-    'd4e06af8b674ac74ba745d52e4382bd3'
+    '469c879236ed694f60b81122e91ca02e'
 )
 
 maintainer=\
@@ -22,6 +20,120 @@ maintainer=\
 
 requires=\
 (
+    'bc/host'
     'kmod/host'
     'lz4/host'
 )
+
+post_unpack()
+{
+    patches=$(ls "$pkg_dir/patches/$version/"*.patch\
+	"$cfg_dir_system/patches/linux/$version/"*.patch 2>/dev/null)
+    if [ -n "$patches" ]; then
+        cat $patches | patch -p1
+    fi
+
+    if [ -d "$cfg_dir_toolchain/firmware" ]; then
+        tar -C "$cfg_dir_toolchain/firmware" -c -v -f - . | tar -C firmware -x -v -f -
+    fi
+}
+
+refresh()
+{
+    for rule in configure build target_install; do
+        if [ "$cfg_dir_system/cfg/linux-${version}.cfg" -nt "$cfg_dir_builds/linux/$pkg_var/.$rule" ]; then
+            rm "$cfg_dir_builds/linux/$pkg_var/.$rule"
+        fi
+    done
+}
+
+configure()
+{
+    $cmd_make \
+        ARCH=${cfg_target_linux} \
+        mrproper &&
+
+    cp "$cfg_dir_system/cfg/linux-${version}.cfg" .config &&
+
+    yes '' | $cmd_make \
+        CROSS_COMPILE=${cfg_target_canonical}- \
+        ARCH=${cfg_target_linux} \
+        oldconfig
+}
+
+build()
+{
+    $cmd_make \
+        CROSS_COMPILE=$cfg_target_canonical- \
+        ARCH=$cfg_target_linux &&
+    $cmd_make \
+        CROSS_COMPILE=$cfg_target_canonical- \
+        ARCH=$cfg_target_linux \
+        modules &&
+
+    if [ "$(basename $cfg_target_linux_kernel)" = 'uImage' ]; then
+        $cmd_make \
+            CROSS_COMPILE=$cfg_target_canonical- \
+            ARCH=$cfg_target_linux \
+            uImage
+    fi
+
+    # Compressed image.
+    if [ "$(basename $cfg_target_linux_kernel)" = 'zImage' ]; then
+        $cmd_make \
+            CROSS_COMPILE=$cfg_target_canonical- \
+            ARCH=$cfg_target_linux \
+            zImage
+    fi
+
+    # Device tree blob.
+    if [ -n "$cfg_target_linux_dtb" ]; then
+        $cmd_make \
+            CROSS_COMPILE=$cfg_target_canonical- \
+            ARCH=$cfg_target_linux \
+            dtbs
+    fi
+
+    if [ -n "${cfg_target_linux_size}" ]; then
+        dd if="$cfg_target_linux_kernel" of="${cfg_target_linux_kernel}.padded" \
+            ibs="${cfg_target_linux_size}" conv=sync &&
+        mv "${cfg_target_linux_kernel}.padded" "${cfg_target_linux_kernel}"
+    fi
+}
+
+host_install()
+{
+    # Device tree blobs.
+    if [ -n "$cfg_target_linux_dtb" ]; then
+        $cmd_mkdir "$cfg_dir_toolchain/boot" &&
+            cp -v "$(dirname $cfg_target_linux_dtb)/"*.dtb "$cfg_dir_toolchain/boot"
+    fi
+}
+
+target_install()
+{
+    kernel="$cfg_dir_base/${cfg_sys_family}/glued-${cfg_glued_version}-${cfg_sys_family}-kernel.bin"
+
+    if [ -n "$(file "$cfg_target_linux_kernel" | grep ELF)" ]; then
+        strip="$(echo $cfg_dir_toolchain/bin/*-strip)"
+        $strip -s -R .comment "$cfg_target_linux_kernel"
+    fi
+
+    # Kernel image.
+    if [ -n "$cfg_target_linux_kernel" ]; then
+        cp -v "$cfg_target_linux_kernel" "$kernel"
+        cp -v "$cfg_target_linux_kernel" "$cfg_dir_rootfs/boot/kernel"
+    fi
+
+    $cmd_make \
+        CROSS_COMPILE="$cfg_target_canonical-" \
+        ARCH="$cfg_target_linux" \
+        INSTALL_MOD_PATH="$cfg_dir_rootfs/usr" \
+        modules_install
+
+    $cmd_make \
+        CROSS_COMPILE="$cfg_target_canonical-" \
+        ARCH="$cfg_target_linux" \
+        INSTALL_MOD_PATH="$cfg_dir_rootfs/usr" \
+        firmware_install
+}

rules/linux/igep.bash

@@ -1,27 +0,0 @@
-source "$pkg_common"
-
-version=\
-(
-    '3.5.4'
-)
-
-url=\
-(
-    "http://www.kernel.org/pub/linux/kernel/v3.0/linux-$version.tar.bz2"
-)
-
-md5=\
-(
-    '95d5c7271ad448bc965bdb29339b6923'
-)
-
-maintainer=\
-(
-    'Ricardo Martins <rasm@fe.up.pt>'
-)
-
-requires=\
-(
-    'u-boot'
-    'kmod/host'
-)

rules/muparser/default.bash

@@ -1,6 +1,6 @@
 version=\
 (
-    "v2_2_0"
+    'v2_2_3'
 )
 
 url=\
@@ -10,7 +10,7 @@ url=\
 
 md5=\
 (
-    "27024148b389b98f1821252a7ba87b19"
+    '9de40ec1dab5bd2787ee344fce5846ad'
 )
 
 configure()

rules/tcpdump/default.bash

@@ -1,16 +1,16 @@
 version=\
 (
-    4.3.0
+    '4.6.1'
 )
 
 url=\
 (
-    http://www.tcpdump.org/release/tcpdump-$version.tar.gz
+    "http://www.tcpdump.org/release/tcpdump-$version.tar.gz"
 )
 
 md5=\
 (
-    a3fe4d30ac85ff5467c889ff46b7e1e8
+    'dab267ec30216a069747d10314079ec7'
 )
 
 requires=\
@@ -21,7 +21,7 @@ requires=\
 configure()
 {
     echo 'ac_cv_linux_vers=${ac_cv_linux_vers=2}' > config.cache
-    ../tcpdump-$version/configure -C \
+    "../tcpdump-$version/configure" -C \
         --prefix="$cfg_dir_toolchain_sysroot/usr" \
         --disable-static \
         --enable-shared \
@@ -29,7 +29,8 @@ configure()
         --host=$cfg_target_canonical \
         --build=$cfg_host_canonical \
         --includedir="$cfg_dir_toolchain_sysroot/usr/include" \
-        --libdir="$cfg_dir_toolchain_sysroot/usr/lib"
+        --libdir="$cfg_dir_toolchain_sysroot/usr/lib" \
+        --disable-ipv6
 }
 
 build()

rules/termcap/common.bash

@@ -0,0 +1,14 @@
+version=\
+(
+    '1.3.1'
+)
+
+url=\
+(
+  "ftp://ftp.gnu.org/gnu/termcap/termcap-$version.tar.gz"
+)
+
+md5=\
+(
+  'ffe6f86e63a3a29fa53ac645faaabdfa'
+)

rules/termcap/default.bash

@@ -1,17 +1,4 @@
-version=\
-(
-    '1.3.1'
-)
-
-url=\
-(
-  "ftp://ftp.gnu.org/gnu/termcap/termcap-$version.tar.gz"
-)
-
-md5=\
-(
-  'ffe6f86e63a3a29fa53ac645faaabdfa'
-)
+source "$pkg_common"
 
 configure()
 {
@@ -35,7 +22,7 @@ host_install()
 
 target_install()
 {
-  # Libs: 
+  # Libs:
   for f in "$cfg_dir_toolchain_sysroot/usr/lib/"libtermcap*; do
     if [ -L "$f" ]; then
       $cmd_cp "$f" "$cfg_dir_rootfs/usr/lib"

rules/termcap/host.bash

@@ -0,0 +1,19 @@
+source "$pkg_common"
+
+configure()
+{
+    ./configure \
+	--prefix="$cfg_dir_toolchain" \
+	--enable-shared \
+	--disable-nls
+}
+
+build()
+{
+  $cmd_make
+}
+
+host_install()
+{
+  $cmd_make install
+}

rules/u-boot/common.bash

@@ -1,41 +0,0 @@
-post_unpack()
-{
-    patches=$(ls "$pkg_dir/patches-$version/"*.patch\
-	"$cfg_dir_system/patches/u-boot/patches-${version}/"*.patch 2>/dev/null)
-    if [ -n "$patches" ]; then
-        cat $patches | patch -p1
-    fi
-}
-
-configure()
-{
-    $cmd_make \
-        ARCH="$cfg_target_uboot_arch" \
-        CROSS_COMPILE="$cfg_target_canonical"- \
-        "${cfg_target_uboot_config}_config"
-}
-
-build()
-{
-    $cmd_make \
-        ARCH="$cfg_target_uboot_arch" \
-        CROSS_COMPILE="$cfg_target_canonical"-
-}
-
-host_install()
-{
-    $cmd_cp \
-        tools/mkimage \
-        "$cfg_dir_toolchain/bin"
-}
-
-target_install()
-{
-    if [ -f MLO ]; then
-        $cmd_cp MLO "$cfg_dir_rootfs/boot"
-    fi
-
-    if [ -f u-boot.img ]; then
-        $cmd_cp u-boot.img "$cfg_dir_rootfs/boot"
-    fi
-}

rules/u-boot/default.bash

@@ -1,8 +1,6 @@
-source "$pkg_common"
-
 version=\
 (
-    '2014.01'
+    '2014.07'
 )
 
 url=\
@@ -12,5 +10,44 @@ url=\
 
 md5=\
 (
-    'e531307578f6d32a7ccb1d04f1e08cbc'
+    '36d4bad687edcafa396fee607e505d4e'
 )
+
+post_unpack()
+{
+    patches=$(ls "$pkg_dir/patches/$version/"*.patch\
+	"$cfg_dir_system/patches/u-boot/$version/"*.patch 2>/dev/null)
+    if [ -n "$patches" ]; then
+        cat $patches | patch -p1
+    fi
+}
+
+configure()
+{
+    $cmd_make \
+        "${cfg_target_uboot_config}_config"
+}
+
+build()
+{
+    $cmd_make \
+        CROSS_COMPILE="$cfg_target_canonical"-
+}
+
+host_install()
+{
+    $cmd_cp \
+        tools/mkimage \
+        "$cfg_dir_toolchain/bin"
+}
+
+target_install()
+{
+    if [ -f MLO ]; then
+        $cmd_cp MLO "$cfg_dir_rootfs/boot"
+    fi
+
+    if [ -f u-boot.img ]; then
+        $cmd_cp u-boot.img "$cfg_dir_rootfs/boot"
+    fi
+}

rules/u-boot/igep_xloader.bash

@@ -1,12 +0,0 @@
-source "$pkg_dir/default.bash"
-
-host_install()
-{
-    $cmd_mkdir ${cfg_dir_rootfs}/../boot/
-    $cmd_cp u-boot.bin ${cfg_dir_rootfs}/../boot/
-}
-
-target_install()
-{
-    echo "using dummy 'target_install'."
-}

rules/util-linux/host.bash

@@ -1,5 +1,10 @@
 source "$pkg_common"
 
+requires=\
+(
+    'termcap/host'
+)
+
 configure()
 {
     cd "$pkg_build_dir" &&

systems/lctr-a6xx/config

@@ -4,7 +4,7 @@ cfg_services0='dropbear network storage upgrade syslog escc ptpd setserial'
 cfg_services1=''
 cfg_services2='dune'
 cfg_modules=''
-cfg_packages='zlib dropbear rsync busybox flashrom e2fsprogs socat linux escc syslinux syslinux/host ptpd ntp uswitch pciutils apache-ant/host bzip2 libantlr3c boost europa'
+cfg_packages='zlib dropbear rsync busybox flashrom e2fsprogs socat linux escc syslinux syslinux/host ptpd ntp uswitch pciutils bzip2'
 cfg_terminal='ttyS0'
 cfg_target_linux_kernel='arch/x86/boot/bzImage'
 cfg_ptpd_master='true'

systems/lctr-a6xx/lauv-dolphin-2.cfg

@@ -0,0 +1,5 @@
+cfg_hostname='lauv-dolphin-2'
+cfg_eth_ext_ip='10.0.10.140'
+cfg_packages="$cfg_packages"
+cfg_escc_script='/etc/escc/ifog-imu-1-a.sh'
+cfg_dune_i18n='C'

systems/lctr-a6xx/lauv-dolphin-3.cfg

@@ -0,0 +1,5 @@
+cfg_hostname='lauv-dolphin-3'
+cfg_eth_ext_ip='10.0.10.150'
+cfg_packages="$cfg_packages"
+cfg_escc_script='/etc/escc/ifog-imu-1-a.sh'
+cfg_dune_i18n='C'

systems/lctr-a9xx/ardupilot-testbed.cfg

@@ -1,2 +0,0 @@
-cfg_hostname="ardupilot-testbed"
-cfg_eth_ext_ip="10.0.200.6"

systems/lctr-a9xx/cfg/linux-3.14.16.cfg

@@ -1,6 +1,6 @@
 #
 # Automatically generated file; DO NOT EDIT.
-# Linux/arm 3.13.1 Kernel Configuration
+# Linux/arm 3.14.16 Kernel Configuration
 #
 CONFIG_ARM=y
 CONFIG_SYS_SUPPORTS_APM_EMULATION=y
@@ -102,7 +102,6 @@ CONFIG_GENERIC_SCHED_CLOCK=y
 # CONFIG_CGROUPS is not set
 # CONFIG_CHECKPOINT_RESTORE is not set
 # CONFIG_NAMESPACES is not set
-# CONFIG_UIDGID_STRICT_TYPE_CHECKS is not set
 # CONFIG_SCHED_AUTOGROUP is not set
 # CONFIG_SYSFS_DEPRECATED is not set
 # CONFIG_RELAY is not set
@@ -140,11 +139,14 @@ CONFIG_COMPAT_BRK=y
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
+# CONFIG_SYSTEM_TRUSTED_KEYRING is not set
 # CONFIG_PROFILING is not set
 CONFIG_HAVE_OPROFILE=y
 # CONFIG_KPROBES is not set
 # CONFIG_JUMP_LABEL is not set
 # CONFIG_HAVE_64BIT_ALIGNED_ACCESS is not set
+CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
+CONFIG_ARCH_USE_BUILTIN_BSWAP=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_ARCH_TRACEHOOK=y
@@ -160,6 +162,11 @@ CONFIG_HAVE_PERF_USER_STACK_DUMP=y
 CONFIG_HAVE_ARCH_JUMP_LABEL=y
 CONFIG_ARCH_WANT_IPC_PARSE_VERSION=y
 CONFIG_HAVE_ARCH_SECCOMP_FILTER=y
+CONFIG_HAVE_CC_STACKPROTECTOR=y
+# CONFIG_CC_STACKPROTECTOR is not set
+CONFIG_CC_STACKPROTECTOR_NONE=y
+# CONFIG_CC_STACKPROTECTOR_REGULAR is not set
+# CONFIG_CC_STACKPROTECTOR_STRONG is not set
 CONFIG_HAVE_CONTEXT_TRACKING=y
 CONFIG_HAVE_VIRT_CPU_ACCOUNTING_GEN=y
 CONFIG_HAVE_IRQ_TIME_ACCOUNTING=y
@@ -177,7 +184,6 @@ CONFIG_HAVE_GENERIC_DMA_COHERENT=y
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 CONFIG_BASE_SMALL=0
-# CONFIG_SYSTEM_TRUSTED_KEYRING is not set
 CONFIG_MODULES=y
 # CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
@@ -227,6 +233,7 @@ CONFIG_DEFAULT_CFQ=y
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="cfq"
 CONFIG_UNINLINE_SPIN_UNLOCK=y
+CONFIG_ARCH_SUPPORTS_ATOMIC_RMW=y
 CONFIG_FREEZER=y
 
 #
@@ -257,8 +264,8 @@ CONFIG_ARCH_MULTIPLATFORM=y
 # CONFIG_ARCH_W90X900 is not set
 # CONFIG_ARCH_LPC32XX is not set
 # CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_MSM is not set
-# CONFIG_ARCH_SHMOBILE is not set
+# CONFIG_ARCH_MSM_NODT is not set
+# CONFIG_ARCH_SHMOBILE_LEGACY is not set
 # CONFIG_ARCH_RPC is not set
 # CONFIG_ARCH_SA1100 is not set
 # CONFIG_ARCH_S3C24XX is not set
@@ -283,10 +290,13 @@ CONFIG_ARCH_MULTI_V6_V7=y
 # CONFIG_ARCH_MULTI_CPU_AUTO is not set
 # CONFIG_ARCH_MVEBU is not set
 # CONFIG_ARCH_BCM is not set
+# CONFIG_ARCH_BERLIN is not set
 # CONFIG_GPIO_PCA953X is not set
 # CONFIG_KEYBOARD_GPIO_POLLED is not set
 # CONFIG_ARCH_HIGHBANK is not set
+# CONFIG_ARCH_HI3xxx is not set
 # CONFIG_ARCH_KEYSTONE is not set
+# CONFIG_ARCH_MSM_DT is not set
 # CONFIG_ARCH_MXC is not set
 
 #
@@ -297,12 +307,12 @@ CONFIG_ARCH_MULTI_V6_V7=y
 # OMAP Feature Selections
 #
 CONFIG_POWER_AVS_OMAP=y
-# CONFIG_POWER_AVS_OMAP_CLASS3 is not set
+CONFIG_POWER_AVS_OMAP_CLASS3=y
 CONFIG_OMAP_RESET_CLOCKS=y
 CONFIG_OMAP_MUX=y
-# CONFIG_OMAP_MUX_DEBUG is not set
+CONFIG_OMAP_MUX_DEBUG=y
 CONFIG_OMAP_MUX_WARNINGS=y
-# CONFIG_OMAP_32K_TIMER is not set
+CONFIG_OMAP_32K_TIMER=y
 # CONFIG_OMAP3_L2_AUX_SECURE_SAVE_RESTORE is not set
 CONFIG_OMAP_DM_TIMER=y
 CONFIG_OMAP_PM_NOOP=y
@@ -313,6 +323,7 @@ CONFIG_ARCH_OMAP3=y
 # CONFIG_SOC_OMAP5 is not set
 # CONFIG_SOC_AM33XX is not set
 # CONFIG_SOC_AM43XX is not set
+# CONFIG_SOC_DRA7XX is not set
 CONFIG_ARCH_OMAP2PLUS=y
 
 #
@@ -320,7 +331,6 @@ CONFIG_ARCH_OMAP2PLUS=y
 #
 CONFIG_ARCH_OMAP2PLUS_TYPICAL=y
 CONFIG_SOC_HAS_OMAP2_SDRC=y
-# CONFIG_SOC_DRA7XX is not set
 CONFIG_SOC_OMAP3430=y
 # CONFIG_SOC_TI81XX is not set
 
@@ -342,7 +352,7 @@ CONFIG_SOC_OMAP3430=y
 # CONFIG_MACH_CM_T35 is not set
 # CONFIG_MACH_CM_T3517 is not set
 # CONFIG_MACH_SBC3530 is not set
-# CONFIG_OMAP3_EMU is not set
+CONFIG_OMAP3_EMU=y
 # CONFIG_OMAP3_SDRC_AC_TIMING is not set
 # CONFIG_ARCH_ROCKCHIP is not set
 # CONFIG_ARCH_SOCFPGA is not set
@@ -403,6 +413,7 @@ CONFIG_TI_PRIV_EDMA=y
 #
 # Bus support
 #
+CONFIG_ARM_AMBA=y
 # CONFIG_PCI_SYSCALL is not set
 # CONFIG_PCCARD is not set
 
@@ -442,6 +453,7 @@ CONFIG_ARCH_WANT_GENERAL_HUGETLB=y
 CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
 CONFIG_HAVE_MEMBLOCK=y
+CONFIG_NO_BOOTMEM=y
 CONFIG_MEMORY_ISOLATION=y
 # CONFIG_HAVE_BOOTMEM_INFO_NODE is not set
 CONFIG_PAGEFLAGS_EXTENDED=y
@@ -459,11 +471,11 @@ CONFIG_NEED_PER_CPU_KM=y
 CONFIG_CMA=y
 # CONFIG_CMA_DEBUG is not set
 # CONFIG_ZBUD is not set
+# CONFIG_ZSMALLOC is not set
 CONFIG_FORCE_MAX_ZONEORDER=11
 CONFIG_ALIGNMENT_TRAP=y
 # CONFIG_UACCESS_WITH_MEMCPY is not set
 # CONFIG_SECCOMP is not set
-# CONFIG_CC_STACKPROTECTOR is not set
 CONFIG_SWIOTLB=y
 CONFIG_IOMMU_HELPER=y
 # CONFIG_XEN is not set
@@ -506,7 +518,6 @@ CONFIG_CPU_FREQ_GOV_POWERSAVE=y
 CONFIG_CPU_FREQ_GOV_USERSPACE=y
 CONFIG_CPU_FREQ_GOV_ONDEMAND=y
 CONFIG_CPU_FREQ_GOV_CONSERVATIVE=y
-CONFIG_GENERIC_CPUFREQ_CPU0=y
 
 #
 # ARM CPU frequency scaling drivers
@@ -632,6 +643,7 @@ CONFIG_NETFILTER_ADVANCED=y
 # CONFIG_NETFILTER_NETLINK_QUEUE is not set
 # CONFIG_NETFILTER_NETLINK_LOG is not set
 # CONFIG_NF_CONNTRACK is not set
+# CONFIG_NF_TABLES is not set
 # CONFIG_NETFILTER_XTABLES is not set
 # CONFIG_IP_SET is not set
 # CONFIG_IP_VS is not set
@@ -752,8 +764,8 @@ CONFIG_OF_ADDRESS=y
 CONFIG_OF_IRQ=y
 CONFIG_OF_NET=y
 CONFIG_OF_MDIO=y
-# CONFIG_PARPORT is not set
 CONFIG_ARCH_MIGHT_HAVE_PC_PARPORT=y
+# CONFIG_PARPORT is not set
 CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_NULL_BLK is not set
 # CONFIG_BLK_DEV_COW_COMMON is not set
@@ -974,6 +986,7 @@ CONFIG_USB_NET_CDC_NCM=y
 # CONFIG_USB_NET_CDC_MBIM is not set
 # CONFIG_USB_NET_DM9601 is not set
 # CONFIG_USB_NET_SR9700 is not set
+# CONFIG_USB_NET_SR9800 is not set
 # CONFIG_USB_NET_SMSC75XX is not set
 CONFIG_USB_NET_SMSC95XX=y
 # CONFIG_USB_NET_GL620A is not set
@@ -1045,7 +1058,6 @@ CONFIG_KEYBOARD_GPIO=y
 # CONFIG_KEYBOARD_SAMSUNG is not set
 # CONFIG_KEYBOARD_STOWAWAY is not set
 # CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_SH_KEYSC is not set
 # CONFIG_KEYBOARD_OMAP4 is not set
 # CONFIG_KEYBOARD_TWL4030 is not set
 # CONFIG_KEYBOARD_XTKBD is not set
@@ -1053,27 +1065,7 @@ CONFIG_KEYBOARD_GPIO=y
 # CONFIG_INPUT_JOYSTICK is not set
 # CONFIG_INPUT_TABLET is not set
 # CONFIG_INPUT_TOUCHSCREEN is not set
-CONFIG_INPUT_MISC=y
-# CONFIG_INPUT_AD714X is not set
-# CONFIG_INPUT_BMA150 is not set
-# CONFIG_INPUT_MMA8450 is not set
-# CONFIG_INPUT_MPU3050 is not set
-# CONFIG_INPUT_GP2A is not set
-# CONFIG_INPUT_GPIO_TILT_POLLED is not set
-# CONFIG_INPUT_ATI_REMOTE2 is not set
-# CONFIG_INPUT_KEYSPAN_REMOTE is not set
-# CONFIG_INPUT_KXTJ9 is not set
-# CONFIG_INPUT_POWERMATE is not set
-# CONFIG_INPUT_YEALINK is not set
-# CONFIG_INPUT_CM109 is not set
-CONFIG_INPUT_TWL4030_PWRBUTTON=y
-# CONFIG_INPUT_TWL4030_VIBRA is not set
-# CONFIG_INPUT_UINPUT is not set
-# CONFIG_INPUT_PCF8574 is not set
-# CONFIG_INPUT_GPIO_ROTARY_ENCODER is not set
-# CONFIG_INPUT_ADXL34X is not set
-# CONFIG_INPUT_IMS_PCU is not set
-# CONFIG_INPUT_CMA3000 is not set
+# CONFIG_INPUT_MISC is not set
 
 #
 # Hardware I/O ports
@@ -1119,6 +1111,8 @@ CONFIG_SERIAL_8250_RSA=y
 #
 # Non-8250 serial port support
 #
+# CONFIG_SERIAL_AMBA_PL010 is not set
+# CONFIG_SERIAL_AMBA_PL011 is not set
 # CONFIG_SERIAL_MAX3100 is not set
 # CONFIG_SERIAL_MAX310X is not set
 # CONFIG_SERIAL_SH_SCI is not set
@@ -1165,20 +1159,20 @@ CONFIG_I2C_HELPER_AUTO=y
 # CONFIG_I2C_CBUS_GPIO is not set
 # CONFIG_I2C_DESIGNWARE_PLATFORM is not set
 # CONFIG_I2C_GPIO is not set
+# CONFIG_I2C_NOMADIK is not set
 # CONFIG_I2C_OCORES is not set
 CONFIG_I2C_OMAP=y
 # CONFIG_I2C_PCA_PLATFORM is not set
 # CONFIG_I2C_PXA_PCI is not set
-# CONFIG_I2C_SH_MOBILE is not set
 # CONFIG_I2C_SIMTEC is not set
 # CONFIG_I2C_XILINX is not set
-# CONFIG_I2C_RCAR is not set
 
 #
 # External I2C/SMBus adapter drivers
 #
 # CONFIG_I2C_DIOLAN_U2C is not set
 # CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_ROBOTFUZZ_OSIF is not set
 # CONFIG_I2C_TAOS_EVM is not set
 # CONFIG_I2C_TINY_USB is not set
 
@@ -1203,6 +1197,7 @@ CONFIG_SPI_MASTER=y
 # CONFIG_SPI_OC_TINY is not set
 CONFIG_SPI_OMAP24XX=y
 # CONFIG_SPI_TI_QSPI is not set
+# CONFIG_SPI_PL022 is not set
 # CONFIG_SPI_PXA2XX_PCI is not set
 # CONFIG_SPI_SC18IS602 is not set
 # CONFIG_SPI_XCOMM is not set
@@ -1251,6 +1246,8 @@ CONFIG_PINMUX=y
 CONFIG_PINCONF=y
 CONFIG_GENERIC_PINCONF=y
 # CONFIG_DEBUG_PINCTRL is not set
+# CONFIG_PINCTRL_CAPRI is not set
+# CONFIG_PINCTRL_MSM8X74 is not set
 CONFIG_PINCTRL_SINGLE=y
 CONFIG_ARCH_HAVE_CUSTOM_GPIO_H=y
 CONFIG_ARCH_REQUIRE_GPIOLIB=y
@@ -1265,7 +1262,9 @@ CONFIG_GPIO_SYSFS=y
 #
 # CONFIG_GPIO_GENERIC_PLATFORM is not set
 # CONFIG_GPIO_EM is not set
+# CONFIG_GPIO_PL061 is not set
 # CONFIG_GPIO_RCAR is not set
+# CONFIG_GPIO_SCH311X is not set
 # CONFIG_GPIO_TS5500 is not set
 # CONFIG_GPIO_GRGPIO is not set
 
@@ -1429,6 +1428,7 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_MAX6697 is not set
 # CONFIG_SENSORS_MCP3021 is not set
 # CONFIG_SENSORS_NCT6775 is not set
+# CONFIG_SENSORS_NTC_THERMISTOR is not set
 # CONFIG_SENSORS_PC87360 is not set
 # CONFIG_SENSORS_PC87427 is not set
 # CONFIG_SENSORS_PCF8591 is not set
@@ -1468,6 +1468,7 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_W83627EHF is not set
 CONFIG_THERMAL=y
 CONFIG_THERMAL_HWMON=y
+CONFIG_THERMAL_OF=y
 CONFIG_THERMAL_DEFAULT_GOV_STEP_WISE=y
 # CONFIG_THERMAL_DEFAULT_GOV_FAIR_SHARE is not set
 # CONFIG_THERMAL_DEFAULT_GOV_USER_SPACE is not set
@@ -1489,6 +1490,8 @@ CONFIG_WATCHDOG_CORE=y
 # Watchdog Device Drivers
 #
 # CONFIG_SOFT_WATCHDOG is not set
+# CONFIG_GPIO_WATCHDOG is not set
+# CONFIG_ARM_SP805_WATCHDOG is not set
 # CONFIG_DW_WATCHDOG is not set
 CONFIG_OMAP_WATCHDOG=y
 CONFIG_TWL4030_WATCHDOG=y
@@ -1536,6 +1539,7 @@ CONFIG_MFD_CORE=y
 # CONFIG_MFD_88PM800 is not set
 # CONFIG_MFD_88PM805 is not set
 # CONFIG_MFD_88PM860X is not set
+# CONFIG_MFD_MAX14577 is not set
 # CONFIG_MFD_MAX77686 is not set
 # CONFIG_MFD_MAX77693 is not set
 # CONFIG_MFD_MAX8907 is not set
@@ -1555,6 +1559,7 @@ CONFIG_MFD_CORE=y
 # CONFIG_MFD_STMPE is not set
 # CONFIG_MFD_SYSCON is not set
 # CONFIG_MFD_TI_AM335X_TSCADC is not set
+# CONFIG_MFD_LP3943 is not set
 # CONFIG_MFD_LP8788 is not set
 CONFIG_MFD_OMAP_USB_HOST=y
 # CONFIG_MFD_PALMAS is not set
@@ -1594,6 +1599,7 @@ CONFIG_REGULATOR_DEBUG=y
 CONFIG_REGULATOR_FIXED_VOLTAGE=y
 # CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
 # CONFIG_REGULATOR_USERSPACE_CONSUMER is not set
+# CONFIG_REGULATOR_ACT8865 is not set
 # CONFIG_REGULATOR_AD5398 is not set
 # CONFIG_REGULATOR_DA9210 is not set
 # CONFIG_REGULATOR_FAN53555 is not set
@@ -1621,7 +1627,6 @@ CONFIG_REGULATOR_TWL4030=y
 #
 # Graphics support
 #
-# CONFIG_TEGRA_HOST1X is not set
 # CONFIG_DRM is not set
 # CONFIG_VGASTATE is not set
 # CONFIG_VIDEO_OUTPUT_CONTROL is not set
@@ -1794,18 +1799,6 @@ CONFIG_USB_OHCI_HCD_OMAP3=y
 # CONFIG_USB_SL811_HCD is not set
 # CONFIG_USB_R8A66597_HCD is not set
 # CONFIG_USB_HCD_TEST_MODE is not set
-CONFIG_USB_MUSB_HDRC=y
-# CONFIG_USB_MUSB_HOST is not set
-# CONFIG_USB_MUSB_GADGET is not set
-CONFIG_USB_MUSB_DUAL_ROLE=y
-CONFIG_USB_MUSB_TUSB6010=y
-# CONFIG_USB_MUSB_OMAP2PLUS is not set
-# CONFIG_USB_MUSB_AM35X is not set
-# CONFIG_USB_MUSB_DSPS is not set
-# CONFIG_USB_MUSB_UX500 is not set
-# CONFIG_USB_TI_CPPI41_DMA is not set
-# CONFIG_USB_TUSB_OMAP_DMA is not set
-CONFIG_MUSB_PIO_ONLY=y
 # CONFIG_USB_RENESAS_USBHS is not set
 
 #
@@ -1844,7 +1837,20 @@ CONFIG_USB_STORAGE=y
 #
 # CONFIG_USB_MDC800 is not set
 # CONFIG_USB_MICROTEK is not set
+CONFIG_USB_MUSB_HDRC=y
+# CONFIG_USB_MUSB_HOST is not set
+# CONFIG_USB_MUSB_GADGET is not set
+CONFIG_USB_MUSB_DUAL_ROLE=y
+CONFIG_USB_MUSB_TUSB6010=y
+# CONFIG_USB_MUSB_OMAP2PLUS is not set
+# CONFIG_USB_MUSB_AM35X is not set
+# CONFIG_USB_MUSB_DSPS is not set
+# CONFIG_USB_MUSB_UX500 is not set
+# CONFIG_USB_TI_CPPI41_DMA is not set
+# CONFIG_USB_TUSB_OMAP_DMA is not set
+CONFIG_MUSB_PIO_ONLY=y
 # CONFIG_USB_DWC3 is not set
+# CONFIG_USB_DWC2 is not set
 # CONFIG_USB_CHIPIDEA is not set
 
 #
@@ -1881,6 +1887,7 @@ CONFIG_USB_SERIAL=y
 # CONFIG_USB_SERIAL_METRO is not set
 # CONFIG_USB_SERIAL_MOS7720 is not set
 # CONFIG_USB_SERIAL_MOS7840 is not set
+# CONFIG_USB_SERIAL_MXUPORT is not set
 # CONFIG_USB_SERIAL_NAVMAN is not set
 # CONFIG_USB_SERIAL_PL2303 is not set
 # CONFIG_USB_SERIAL_OTI6858 is not set
@@ -1935,6 +1942,7 @@ CONFIG_USB_SERIAL_OPTION=y
 # USB Physical Layer drivers
 #
 CONFIG_USB_PHY=y
+# CONFIG_USB_OTG_FSM is not set
 CONFIG_NOP_USB_XCEIV=y
 CONFIG_OMAP_CONTROL_USB=y
 CONFIG_OMAP_USB3=y
@@ -1957,8 +1965,10 @@ CONFIG_USB_GADGET_STORAGE_NUM_BUFFERS=2
 #
 # CONFIG_USB_FUSB300 is not set
 # CONFIG_USB_FOTG210_UDC is not set
+# CONFIG_USB_GR_UDC is not set
 # CONFIG_USB_R8A66597 is not set
 # CONFIG_USB_PXA27X is not set
+# CONFIG_USB_S3C_HSOTG is not set
 # CONFIG_USB_MV_UDC is not set
 # CONFIG_USB_MV_U3D is not set
 # CONFIG_USB_M66592 is not set
@@ -1966,7 +1976,6 @@ CONFIG_USB_GADGET_STORAGE_NUM_BUFFERS=2
 # CONFIG_USB_DUMMY_HCD is not set
 CONFIG_USB_LIBCOMPOSITE=y
 CONFIG_USB_U_ETHER=y
-CONFIG_USB_U_RNDIS=y
 CONFIG_USB_F_ECM=y
 CONFIG_USB_F_SUBSET=y
 # CONFIG_USB_CONFIGFS is not set
@@ -2004,6 +2013,7 @@ CONFIG_MMC_BLOCK_BOUNCE=y
 #
 # MMC/SD/SDIO Host Controller Drivers
 #
+# CONFIG_MMC_ARMMMCI is not set
 # CONFIG_MMC_SDHCI is not set
 # CONFIG_MMC_SDHCI_PXAV3 is not set
 # CONFIG_MMC_SDHCI_PXAV2 is not set
@@ -2082,10 +2092,12 @@ CONFIG_RTC_DRV_DS1307=y
 # CONFIG_RTC_DRV_DS1374 is not set
 # CONFIG_RTC_DRV_DS1672 is not set
 # CONFIG_RTC_DRV_DS3232 is not set
+# CONFIG_RTC_DRV_HYM8563 is not set
 # CONFIG_RTC_DRV_MAX6900 is not set
 # CONFIG_RTC_DRV_RS5C372 is not set
 # CONFIG_RTC_DRV_ISL1208 is not set
 # CONFIG_RTC_DRV_ISL12022 is not set
+# CONFIG_RTC_DRV_ISL12057 is not set
 # CONFIG_RTC_DRV_X1205 is not set
 # CONFIG_RTC_DRV_PCF2127 is not set
 # CONFIG_RTC_DRV_PCF8523 is not set
@@ -2136,6 +2148,8 @@ CONFIG_RTC_DRV_DS1307=y
 #
 # on-CPU RTC drivers
 #
+# CONFIG_RTC_DRV_PL030 is not set
+# CONFIG_RTC_DRV_PL031 is not set
 # CONFIG_RTC_DRV_SNVS is not set
 # CONFIG_RTC_DRV_MOXART is not set
 
@@ -2149,10 +2163,12 @@ CONFIG_DMADEVICES=y
 #
 # DMA Devices
 #
+# CONFIG_AMBA_PL08X is not set
 # CONFIG_DW_DMAC_CORE is not set
 # CONFIG_DW_DMAC is not set
 # CONFIG_TIMB_DMA is not set
 CONFIG_TI_EDMA=y
+# CONFIG_PL330_DMA is not set
 CONFIG_DMA_OMAP=y
 # CONFIG_TI_CPPI41 is not set
 CONFIG_DMA_ENGINE=y
@@ -2184,8 +2200,9 @@ CONFIG_COMMON_CLK=y
 #
 # Common Clock Framework
 #
-# CONFIG_COMMON_CLK_DEBUG is not set
 # CONFIG_COMMON_CLK_SI5351 is not set
+# CONFIG_COMMON_CLK_SI570 is not set
+# CONFIG_COMMON_CLK_QCOM is not set
 
 #
 # Hardware Spinlock drivers
@@ -2195,13 +2212,13 @@ CONFIG_CLKSRC_MMIO=y
 CONFIG_ARM_ARCH_TIMER=y
 CONFIG_ARM_ARCH_TIMER_EVTSTREAM=y
 CONFIG_MAILBOX=y
+# CONFIG_PL320_MBOX is not set
 CONFIG_OMAP_MBOX=y
 CONFIG_OMAP2PLUS_MBOX=y
 CONFIG_OMAP_MBOX_KFIFO_SIZE=256
 CONFIG_IOMMU_SUPPORT=y
 CONFIG_OF_IOMMU=y
 # CONFIG_OMAP_IOMMU is not set
-# CONFIG_SHMOBILE_IOMMU is not set
 
 #
 # Remoteproc drivers
@@ -2240,6 +2257,7 @@ CONFIG_GENERIC_PHY=y
 # CONFIG_PHY_EXYNOS_MIPI_VIDEO is not set
 CONFIG_OMAP_USB2=y
 # CONFIG_PHY_EXYNOS_DP_VIDEO is not set
+# CONFIG_BCM_KONA_USB2_PHY is not set
 # CONFIG_POWERCAP is not set
 
 #
@@ -2430,6 +2448,7 @@ CONFIG_HAVE_DEBUG_KMEMLEAK=y
 # CONFIG_DETECT_HUNG_TASK is not set
 # CONFIG_PANIC_ON_OOPS is not set
 CONFIG_PANIC_ON_OOPS_VALUE=0
+CONFIG_PANIC_TIMEOUT=0
 # CONFIG_SCHED_DEBUG is not set
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_TIMER_STATS is not set
@@ -2497,9 +2516,12 @@ CONFIG_TRACING_SUPPORT=y
 # CONFIG_TEST_STRING_HELPERS is not set
 # CONFIG_TEST_KSTRTOX is not set
 # CONFIG_DMA_API_DEBUG is not set
+# CONFIG_TEST_MODULE is not set
+# CONFIG_TEST_USER_COPY is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_KGDB is not set
+# CONFIG_ARM_PTDUMP is not set
 # CONFIG_STRICT_DEVMEM is not set
 CONFIG_ARM_UNWIND=y
 # CONFIG_DEBUG_USER is not set
@@ -2508,7 +2530,9 @@ CONFIG_DEBUG_LL_INCLUDE="mach/debug-macro.S"
 # CONFIG_DEBUG_UART_PL01X is not set
 # CONFIG_DEBUG_UART_8250 is not set
 CONFIG_UNCOMPRESS_INCLUDE="debug/uncompress.h"
+CONFIG_OC_ETM=y
 # CONFIG_PID_IN_CONTEXTIDR is not set
+# CONFIG_DEBUG_SET_MODULE_RONX is not set
 
 #
 # Security options

systems/lctr-a9xx/config

@@ -7,7 +7,7 @@ cfg_services2='dune'
 cfg_packages='u-boot dropbear rsync busybox linux uswitch ppp iptables socat bridge-utils ntp e2fsprogs i2c-tools iperf dnsmasq'
 cfg_target_linux_kernel='arch/arm/boot/zImage'
 cfg_target_linux_dtb='arch/arm/boot/dts/omap3-lctr-a9xx.dtb'
-cfg_target_uboot_config='igep0020_lsts'
+cfg_target_uboot_config='igep0020'
 cfg_terminal='ttyO2'
 cfg_ntpd_config='/etc/ntp/server.cfg'
 cfg_eth_ext_mk='255.255.0.0'

systems/lctr-a9xx/manta-12.cfg

@@ -0,0 +1,2 @@
+cfg_hostname='manta-12'
+cfg_eth_ext_ip='10.0.30.12'

systems/lctr-a9xx/patches/linux/3.14.16/00-lctr-a9xx-dts.patch

@@ -12,7 +12,7 @@ diff -Nru linux-3.13.1/arch/arm/boot/dts/Makefile linux-3.13.1.rasm/arch/arm/boo
 diff -Nru linux-3.13.1/arch/arm/boot/dts/omap3-lctr-a9xx.dts linux-3.13.1.rasm/arch/arm/boot/dts/omap3-lctr-a9xx.dts
 --- linux-3.13.1/arch/arm/boot/dts/omap3-lctr-a9xx.dts	1970-01-01 01:00:00.000000000 +0100
 +++ linux-3.13.1.rasm/arch/arm/boot/dts/omap3-lctr-a9xx.dts	2014-02-01 23:49:40.019073833 +0000
-@@ -0,0 +1,107 @@
+@@ -0,0 +1,89 @@
 +/*
 + * Copyright (C) 2014 Universidade do Porto - Faculdade de Engenharia
 + *
@@ -68,24 +68,6 @@ diff -Nru linux-3.13.1/arch/arm/boot/dts/omap3-lctr-a9xx.dts linux-3.13.1.rasm/a
 +};
 +
 +&omap3_pmx_core {
-+	pinctrl-names = "default", "board";
-+	pinctrl-0 = <&hsusbb1_pins &board_pins>;
-+
-+	board_pins: pinmux_board_pins {
-+		pinctrl-single,pins = <
-+			/* gpio_133 - panel backlight */
-+			0x130 (PIN_OUTPUT | MUX_MODE4)
-+			/* gpio_135 - panel LED */
-+			0x132 (PIN_OUTPUT | MUX_MODE4)
-+			/* gpio_157 - transducer */
-+			0x15e (PIN_INPUT_PULLUP | MUX_MODE4)
-+			/* uart1_cts / gpio_150 / UART1 RS232. */
-+			0x150 (PIN_INPUT | MUX_MODE4)
-+			/* uart1_rts / gpio_149 / UART1 RS232. */
-+			0x14e (PIN_INPUT | MUX_MODE4)
-+		>;
-+	};
-+
 +	gpio_keys_pins: pinmux_gpio_keys_pins {
 +		pinctrl-single,pins = <
 +			0x136 (PIN_INPUT_PULLDOWN | MUX_MODE4)	/* gpio_137 - button 2 */

systems/lctr-a9xx/patches/u-boot/2014.07/00-igep0020-lsts.patch

@@ -0,0 +1,81 @@
+diff --git a/board/isee/igep00x0/igep00x0.h b/board/isee/igep00x0/igep00x0.h
+index 181f81f..fe643e4 100644
+--- a/board/isee/igep00x0/igep00x0.h
++++ b/board/isee/igep00x0/igep00x0.h
+@@ -146,7 +146,19 @@ static void setup_net_chip(void);
+ 	MUX_VAL(CP(SYS_BOOT5),      (IEN  | PTD | DIS | M4)) /* GPIO_7 */\
+ 	MUX_VAL(CP(SYS_BOOT6),      (IEN  | PTD | DIS | M4)) /* GPIO_8 */\
+ 	MUX_VAL(CP(SDRC_CKE0),      (IDIS | PTU | EN  | M0)) /* SDRC_CKE0 */\
+-	MUX_VAL(CP(SDRC_CKE1),      (IDIS | PTU | EN  | M0)) /* SDRC_CKE1 */
++	MUX_VAL(CP(SDRC_CKE1),      (IDIS | PTU | EN  | M0)) /* SDRC_CKE1 */\
++	MUX_VAL(CP(UART1_TX),       (IDIS | PTD | DIS | M0)) /* UART1_TX */\
++	MUX_VAL(CP(UART1_RTS),      (IEN  | PTD | DIS | M4)) /* UART1_RTS */\
++	MUX_VAL(CP(UART1_CTS),      (IEN  | PTU | DIS | M4)) /* UART1_CTS */\
++	MUX_VAL(CP(UART1_RX),       (IEN  | PTD | DIS | M0)) /* UART1_RX */\
++	MUX_VAL(CP(MMC2_DAT1),      (IDIS | PTD | DIS | M4)) /* GPIO_133 */\
++	MUX_VAL(CP(MMC2_DAT3),      (IDIS | PTD | DIS | M4)) /* GPIO_135 */\
++	MUX_VAL(CP(MCBSP1_FSR),     (IEN  | PTD | DIS | M4)) /* GPIO_157 */\
++	MUX_VAL(CP(MCBSP2_FSX),     (IEN  | PTD | DIS | M0)) /* McBSP2_FSX */\
++	MUX_VAL(CP(MCBSP2_CLKX),    (IEN  | PTD | DIS | M0)) /* McBSP2_CLKX */\
++	MUX_VAL(CP(MCBSP2_DR),      (IEN  | PTD | DIS | M0)) /* McBSP2_DR */\
++	MUX_VAL(CP(MCBSP2_DX),      (IDIS | PTD | DIS | M0)) /* McBSP2_DX */
++
+ #endif
+
+ #define MUX_IGEP0020() \
+diff --git a/include/configs/omap3_igep00x0.h b/include/configs/omap3_igep00x0.h
+index 79daabd..f1b5bb1 100644
+--- a/include/configs/omap3_igep00x0.h
++++ b/include/configs/omap3_igep00x0.h
+@@ -10,6 +10,8 @@
+ #ifndef __IGEP00X0_H
+ #define __IGEP00X0_H
+
++#undef CONFIG_BOOT_ONENAND
++
+ #ifdef CONFIG_BOOT_NAND
+ #define CONFIG_NAND
+ #endif
+@@ -201,4 +203,42 @@
+ #define CONFIG_NAND_OMAP_ECCSCHEME	OMAP_ECC_HAM1_CODE_HW
+ #endif
+
++#undef CONFIG_EXTRA_ENV_SETTINGS
++#define CONFIG_EXTRA_ENV_SETTINGS                                       \
++  "bootdelay=0\0"                                                       \
++  "loadaddr=0x80200000\0"                                               \
++  "dtbaddr=0x81600000\0"                                                \
++  "ipaddr=192.168.1.90\0"                                               \
++  "serverip=192.168.1.147\0"                                            \
++  "ethaddr=00:50:da:4b:5a:67\0"                                         \
++  "console=ttyO2,115200n8\0"                                            \
++  "mmcroot=/dev/mmcblk0p2\0"                                            \
++  "mmcrootfstype=ext4\0"
++
++#undef CONFIG_BOOTCOMMAND
++#define CONFIG_BOOTCOMMAND                                              \
++  "dcache on;"                                                          \
++  "icache on;"                                                          \
++  "setenv bootargs \"console=${console} root=${mmcroot} rootfstype=${mmcrootfstype} rootwait ro quiet\"; " \
++  "mmc dev 0; "                                                         \
++  "ext4load mmc0 0:2 ${loadaddr} /boot/kernel; "                        \
++  "ext4load mmc0 0:2 ${dtbaddr} /boot/board.dtb; "                      \
++  "bootz ${loadaddr} - ${dtbaddr}; " \
++
++#undef CONFIG_ENV_SIZE
++#define CONFIG_ENV_SIZE			(128 << 10)
++
++#define CONFIG_ENV_IS_NOWHERE
++#define CONFIG_ZERO_BOOTDELAY_CHECK
++
++/* USB */
++#undef CONFIG_MUSB_UDC
++#undef CONFIG_USB_OMAP3
++#undef CONFIG_TWL4030_USB
++
++/* USB device configuration */
++#undef CONFIG_USB_DEVICE
++#undef CONFIG_USB_TTY
++#undef CONFIG_SYS_CONSOLE_IS_IN_ENV
++
+ #endif /* __IGEP00X0_H */

systems/lctr-a9xx/patches/u-boot/patches-2014.01/00-igep0020-lsts.patch

@@ -1,310 +0,0 @@
-diff --git a/board/isee/igep00x0/igep00x0.h b/board/isee/igep00x0/igep00x0.h
-index 181f81f..d1320a1 100644
---- a/board/isee/igep00x0/igep00x0.h
-+++ b/board/isee/igep00x0/igep00x0.h
-@@ -131,6 +131,10 @@ static void setup_net_chip(void);
- 	MUX_VAL(CP(MMC1_DAT1),      (IEN  | PTU | EN  | M0)) /* MMC1_DAT1 */\
- 	MUX_VAL(CP(MMC1_DAT2),      (IEN  | PTU | EN  | M0)) /* MMC1_DAT2 */\
- 	MUX_VAL(CP(MMC1_DAT3),      (IEN  | PTU | EN  | M0)) /* MMC1_DAT3 */\
-+	MUX_VAL(CP(UART1_TX),       (IDIS | PTD | DIS | M0)) /* UART1_TX */\
-+	MUX_VAL(CP(UART1_RTS),      (IDIS | PTD | DIS | M0)) /* UART1_RTS */\
-+	MUX_VAL(CP(UART1_CTS),      (IEN  | PTU | DIS | M0)) /* UART1_CTS */\
-+	MUX_VAL(CP(UART1_RX),       (IEN  | PTD | DIS | M0)) /* UART1_RX */\
- 	MUX_VAL(CP(UART3_TX_IRTX),  (IDIS | PTD | DIS | M0)) /* UART3_TX */\
- 	MUX_VAL(CP(UART3_RX_IRRX),  (IEN  | PTD | DIS | M0)) /* UART3_RX */\
- 	MUX_VAL(CP(I2C1_SCL),       (IEN  | PTU | EN  | M0)) /* I2C1_SCL */\
-@@ -145,6 +149,10 @@ static void setup_net_chip(void);
- 	MUX_VAL(CP(SYS_BOOT4),      (IEN  | PTD | DIS | M4)) /* GPIO_6 */\
- 	MUX_VAL(CP(SYS_BOOT5),      (IEN  | PTD | DIS | M4)) /* GPIO_7 */\
- 	MUX_VAL(CP(SYS_BOOT6),      (IEN  | PTD | DIS | M4)) /* GPIO_8 */\
-+	MUX_VAL(CP(MCBSP2_FSX),     (IEN  | PTD | DIS | M0)) /* McBSP2_FSX */\
-+	MUX_VAL(CP(MCBSP2_CLKX),    (IEN  | PTD | DIS | M0)) /* McBSP2_CLKX */\
-+	MUX_VAL(CP(MCBSP2_DR),      (IEN  | PTD | DIS | M0)) /* McBSP2_DR */\
-+	MUX_VAL(CP(MCBSP2_DX),      (IDIS | PTD | DIS | M0)) /* McBSP2_DX */\
- 	MUX_VAL(CP(SDRC_CKE0),      (IDIS | PTU | EN  | M0)) /* SDRC_CKE0 */\
- 	MUX_VAL(CP(SDRC_CKE1),      (IDIS | PTU | EN  | M0)) /* SDRC_CKE1 */
- #endif
-diff --git a/boards.cfg b/boards.cfg
-index a8336cc..bcc9bb2 100644
---- a/boards.cfg
-+++ b/boards.cfg
-@@ -1246,3 +1246,4 @@ Orphan  powerpc     mpc8xx         -           -               genietv
- Orphan  powerpc     mpc8xx         -           -               mbx8xx              MBX                                  -                                                                                                                                 -
- Orphan  powerpc     mpc8xx         -           -               mbx8xx              MBX860T                              -                                                                                                                                 -
- Orphan  powerpc     mpc8xx         -           -               nx823               NX823                                -                                                                                                                                 -
-+Active  arm         armv7          omap3       isee            igep00x0            igep0020_lsts                             omap3_igep00x0_lsts:MACH_TYPE=MACH_TYPE_IGEP0020                                                                          Ricardo Martins <rasm@fe.up.pt>
-diff --git a/include/configs/omap3_igep00x0_lsts.h b/include/configs/omap3_igep00x0_lsts.h
-new file mode 100644
-index 0000000..858261c
---- /dev/null
-+++ b/include/configs/omap3_igep00x0_lsts.h
-@@ -0,0 +1,269 @@
-+/*
-+ * LSTS optimized configuration for IGEPv2 board
-+ *
-+ * (C) Copyright 2012
-+ * ISEE 2007 SL, <www.iseebcn.com>
-+ *
-+ * SPDX-License-Identifier:	GPL-2.0+
-+ */
-+
-+#ifndef __IGEP00X0_LSTS_H
-+#define __IGEP00X0_LSTS_H
-+
-+#include <asm/sizes.h>
-+
-+/*
-+ * Boot-delay.
-+ */
-+#ifdef CONFIG_BOOTDELAY
-+#	undef CONFIG_BOOTDELAY
-+#endif
-+#define CONFIG_BOOTDELAY 		0
-+#define CONFIG_ZERO_BOOTDELAY_CHECK 	1
-+
-+/*
-+ * High Level Configuration Options
-+ */
-+#define CONFIG_OMAP			1	/* in a TI OMAP core */
-+#define CONFIG_OMAP34XX			1	/* which is a 34XX */
-+#define CONFIG_OMAP_GPIO
-+#define CONFIG_OMAP_COMMON
-+#define CONFIG_OMAP3_GPIO_3
-+
-+#define CONFIG_SDRC	/* The chip has SDRC controller */
-+
-+#include <asm/arch/cpu.h>
-+#include <asm/arch/omap3.h>
-+#include <asm/mach-types.h>
-+
-+/*
-+ * Display CPU and Board information
-+ */
-+#define CONFIG_DISPLAY_CPUINFO		1
-+#define CONFIG_DISPLAY_BOARDINFO	1
-+
-+/* Clock Defines */
-+#define V_OSCK				26000000	/* Clock output from T2 */
-+#define V_SCLK				(V_OSCK >> 1)
-+
-+#define CONFIG_MISC_INIT_R
-+
-+#define CONFIG_CMDLINE_TAG		1	/* enable passing of ATAGs */
-+#define CONFIG_SETUP_MEMORY_TAGS	1
-+#define CONFIG_INITRD_TAG		1
-+#define CONFIG_REVISION_TAG		1
-+
-+#define CONFIG_OF_LIBFDT
-+
-+/*
-+ * NS16550 Configuration
-+ */
-+#define V_NS16550_CLK			48000000	/* 48MHz (APLL96/2) */
-+#define CONFIG_SYS_NS16550
-+#define CONFIG_SYS_NS16550_SERIAL
-+#define CONFIG_SYS_NS16550_REG_SIZE	(-4)
-+#define CONFIG_SYS_NS16550_CLK		V_NS16550_CLK
-+
-+/* select serial console configuration */
-+#define CONFIG_CONS_INDEX		3
-+#define CONFIG_SYS_NS16550_COM3		OMAP34XX_UART3
-+#define CONFIG_SERIAL3			3
-+
-+/* allow to overwrite serial and ethaddr */
-+#define CONFIG_ENV_OVERWRITE
-+#define CONFIG_BAUDRATE			115200
-+#define CONFIG_SYS_BAUDRATE_TABLE	{57600, 115200}
-+#define CONFIG_GENERIC_MMC		1
-+#define CONFIG_MMC			1
-+#define CONFIG_OMAP_HSMMC		1
-+#define CONFIG_DOS_PARTITION		1
-+
-+#undef CONFIG_SHOW_BOOT_PROGRESS
-+
-+/* commands to include */
-+#include <config_cmd_default.h>
-+
-+#define CONFIG_CMD_BOOTZ
-+#define CONFIG_CMD_CACHE
-+#define CONFIG_CMD_EXT4
-+#define CONFIG_CMD_FAT
-+#define CONFIG_CMD_FS_GENERIC
-+#define CONFIG_CMD_I2C
-+#define CONFIG_CMD_MMC
-+
-+#undef CONFIG_BOOTM_NETBSD
-+#undef CONFIG_BOOTM_PLAN9
-+#undef CONFIG_BOOTM_RTEMS
-+#undef CONFIG_BOOTM_VXWORKS
-+#undef CONFIG_BOOTP_DNS
-+#undef CONFIG_BOOTP_DNS2
-+#undef CONFIG_BOOTP_SEND_HOSTNAME
-+#undef CONFIG_CMD_ASKENV
-+#undef CONFIG_CMD_BDI
-+#undef CONFIG_CMD_BOOTD
-+#undef CONFIG_CMD_CRC32
-+#undef CONFIG_CMD_DFU
-+#undef CONFIG_CMD_DHCP
-+#undef CONFIG_CMD_EDITENV
-+#undef CONFIG_CMD_EDITENV
-+#undef CONFIG_CMD_EXPORTENV
-+#undef CONFIG_CMD_FPGA
-+#undef CONFIG_CMD_ITEST
-+#undef CONFIG_CMD_LOADB
-+#undef CONFIG_CMD_LOADS
-+#undef CONFIG_CMD_MEMORY
-+#undef CONFIG_CMD_MISC
-+#undef CONFIG_CMD_NET
-+#undef CONFIG_CMD_NFS
-+#undef CONFIG_CMD_PING
-+#undef CONFIG_CMD_SETGETDCR
-+#undef CONFIG_CMD_SPI
-+#undef CONFIG_MII
-+#undef CONFIG_MUSB_GADGET
-+#undef CONFIG_MUSB_HOST
-+#undef CONFIG_NAND
-+#undef CONFIG_OMAP3_SPI
-+#undef CONFIG_SPI
-+#undef CONFIG_SPI_BOOT
-+#undef CONFIG_SPL_ETH_SUPPORT
-+#undef CONFIG_SPL_NAND_LOAD
-+#undef CONFIG_SPL_NAND_SUPPORT
-+#undef CONFIG_SPL_SPI_FLASH_SUPPORT
-+#undef CONFIG_SPL_SPI_LOAD
-+#undef CONFIG_SPL_SPI_SUPPORT
-+#undef CONFIG_SPL_YMODEM_SUPPORT
-+#undef CONFIG_SYS_LONGHELP
-+#undef CONFIG_FLASH_CFI_DRIVER
-+#undef CONFIG_FLASH_CFI_MTD
-+#undef CONFIG_CMD_FLASH
-+#undef CONFIG_CMD_SAVEENV
-+#undef CONFIG_CMD_IMPORTENV
-+#undef CONFIG_CMD_IMLS
-+#undef CONFIG_CMD_IMI
-+
-+/* Environment. */
-+#define CONFIG_ENV_SIZE			(128 << 10)
-+#define CONFIG_ENV_IS_NOWHERE
-+
-+/*
-+ * TWL4030
-+ */
-+#define CONFIG_TWL4030_POWER		1
-+
-+#ifndef CONFIG_SPL_BUILD
-+#define CONFIG_EXTRA_ENV_SETTINGS                                       \
-+  "loadaddr=0x80200000\0"                                               \
-+  "dtbaddr=0x81600000\0"                                                \
-+  "ipaddr=192.168.1.90\0"                                               \
-+  "serverip=192.168.1.147\0"                                            \
-+  "ethaddr=00:50:da:4b:5a:67\0"                                         \
-+  "console=ttyO2,115200n8\0"                                            \
-+  "mmcroot=/dev/mmcblk0p2\0"                                            \
-+  "mmcrootfstype=ext4\0"
-+
-+#define CONFIG_BOOTCOMMAND                                              \
-+  "setenv bootargs \"console=${console} root=${mmcroot} rootfstype=${mmcrootfstype} rootwait ro quiet\"; " \
-+  "mmc dev 0; "                                                         \
-+  "ext4load mmc0 0:2 ${loadaddr} /boot/kernel; "                        \
-+  "ext4load mmc0 0:2 ${dtbaddr} /boot/board.dtb; "                      \
-+  "bootz ${loadaddr} - ${dtbaddr}; "
-+
-+#endif
-+
-+/*
-+ * Miscellaneous configurable options
-+ */
-+#ifdef CONFIG_SYS_LONGHELP
-+#	undef CONFIG_SYS_LONGHELP
-+#endif
-+
-+#define CONFIG_SYS_NO_FLASH
-+#define CONFIG_SYS_I2C
-+#define CONFIG_SYS_I2C_OMAP34XX
-+#define CONFIG_SYS_OMAP24_I2C_SPEED	100000
-+#define CONFIG_SYS_OMAP24_I2C_SLAVE	1
-+#define CONFIG_SYS_HUSH_PARSER
-+#define CONFIG_SYS_PROMPT		"U-Boot # "
-+#define CONFIG_SYS_CBSIZE		256
-+#define CONFIG_SYS_PBSIZE		(CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
-+#define CONFIG_SYS_MAXARGS		16
-+#define CONFIG_SYS_BARGSIZE		(CONFIG_SYS_CBSIZE)
-+#define CONFIG_SYS_MEMTEST_START	(OMAP34XX_SDRC_CS0)
-+#define CONFIG_SYS_MEMTEST_END		(OMAP34XX_SDRC_CS0 + 0x01F00000) /* 31MB */
-+#define CONFIG_SYS_LOAD_ADDR		(OMAP34XX_SDRC_CS0)
-+#define CONFIG_SYS_MONITOR_LEN		(256 << 10)
-+
-+/*
-+ * OMAP3 has 12 GP timers, they can be driven by the system clock
-+ * (12/13/16.8/19.2/38.4MHz) or by 32KHz clock. We use 13MHz (V_SCLK).
-+ * This rate is divided by a local divisor.
-+ */
-+#define CONFIG_SYS_TIMERBASE		(OMAP34XX_GPT2)
-+#define CONFIG_SYS_PTV			2       /* Divisor: 2^(PTV+1) => 8 */
-+
-+/*
-+ * Physical Memory Map
-+ */
-+#define CONFIG_NR_DRAM_BANKS		2	/* CS1 may or may not be populated */
-+#define PHYS_SDRAM_1			OMAP34XX_SDRC_CS0
-+#define PHYS_SDRAM_2			OMAP34XX_SDRC_CS1
-+
-+/*
-+ * Size of malloc() pool
-+ */
-+#define CONFIG_SYS_MALLOC_LEN		(CONFIG_ENV_SIZE + (128 << 10))
-+
-+/*
-+ * SMSC911x Ethernet
-+ */
-+#if defined(CONFIG_CMD_NET)
-+#	define CONFIG_SMC911X
-+#	define CONFIG_SMC911X_32_BIT
-+#	define CONFIG_SMC911X_BASE	0x2C000000
-+#endif /* (CONFIG_CMD_NET) */
-+
-+/*
-+ * Leave it at 0x80008000 to allow booting new u-boot.bin with X-loader
-+ * and older u-boot.bin with the new U-Boot SPL.
-+ */
-+#define CONFIG_SYS_TEXT_BASE		0x80008000
-+#define CONFIG_SYS_SDRAM_BASE		PHYS_SDRAM_1
-+#define CONFIG_SYS_INIT_RAM_ADDR	0x4020f800
-+#define CONFIG_SYS_INIT_RAM_SIZE	0x800
-+#define CONFIG_SYS_INIT_SP_ADDR		(CONFIG_SYS_INIT_RAM_ADDR + \
-+					 CONFIG_SYS_INIT_RAM_SIZE - \
-+					 GENERATED_GBL_DATA_SIZE)
-+
-+/* SPL */
-+#define CONFIG_SPL
-+#define CONFIG_SPL_FRAMEWORK
-+#define CONFIG_SPL_NAND_SIMPLE
-+#define CONFIG_SPL_TEXT_BASE		0x40200800
-+#define CONFIG_SPL_MAX_SIZE		(54 * 1024)
-+#define CONFIG_SPL_STACK		LOW_LEVEL_SRAM_STACK
-+
-+/* move malloc and bss high to prevent clashing with the main image */
-+#define CONFIG_SYS_SPL_MALLOC_START	0x87000000
-+#define CONFIG_SYS_SPL_MALLOC_SIZE	0x80000
-+#define CONFIG_SPL_BSS_START_ADDR	0x87080000	/* end of minimum RAM */
-+#define CONFIG_SPL_BSS_MAX_SIZE		0x80000		/* 512 KB */
-+
-+/* MMC boot config */
-+#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR	0x300 /* address 0x60000 */
-+#define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS	0x200 /* 256 KB */
-+#define CONFIG_SYS_MMC_SD_FAT_BOOT_PARTITION	1
-+#define CONFIG_SPL_FAT_LOAD_PAYLOAD_NAME	"u-boot.img"
-+
-+#define CONFIG_SPL_BOARD_INIT
-+#define CONFIG_SPL_LIBCOMMON_SUPPORT
-+#define CONFIG_SPL_LIBDISK_SUPPORT
-+#define CONFIG_SPL_I2C_SUPPORT
-+#define CONFIG_SPL_LIBGENERIC_SUPPORT
-+#define CONFIG_SPL_MMC_SUPPORT
-+#define CONFIG_SPL_FAT_SUPPORT
-+#define CONFIG_SPL_SERIAL_SUPPORT
-+
-+#define CONFIG_SPL_POWER_SUPPORT
-+#define CONFIG_SPL_LDSCRIPT		"$(CPUDIR)/omap-common/u-boot-spl.lds"
-+
-+#endif /* __IGEP00X0_LSTS_H */

systems/lctr-a9xx/x8-00.cfg

@@ -1,3 +1,2 @@
 cfg_hostname='x8-00'
 cfg_eth_ext_ip='10.0.20.95'
-cfg_services1='ntpd'

systems/lctr-a9xx/x8-01.cfg

@@ -1,3 +0,0 @@
-cfg_hostname='x8-01'
-cfg_eth_ext_ip='10.0.20.100'
-cfg_services1='ntpd'

systems/lctr-a9xx/x8-02.cfg

@@ -1,3 +1,3 @@
 cfg_hostname='x8-02'
 cfg_eth_ext_ip='10.0.20.105'
-cfg_services1='ntpd'
+cfg_packages='u-boot dropbear rsync busybox linux uswitch ppp iptables socat bridge-utils ntp e2fsprogs i2c-tools iperf dnsmasq libav'

systems/lctr-b2xx/aero-01.cfg

@@ -0,0 +1,6 @@
+cfg_hostname='aero-01'
+cfg_storage='data0:ext4:/opt'
+cfg_eth_ext_ip='10.0.20.120'
+cfg_eth_ext_mk='255.255.0.0'
+cfg_eth_ext_gw='10.0.0.1'
+cfg_packages='u-boot dropbear rsync busybox e2fsprogs ptpd i2c-tools am33xx-cm3/host linux libav'

systems/lctr-b2xx/ardupilot-testbed.cfg

@@ -0,0 +1,2 @@
+cfg_hostname='ardupilot-testbed'
+cfg_eth_ext_ip='10.0.200.6'

systems/lctr-b2xx/cfg/linux-3.14.16.cfg

@@ -1,6 +1,6 @@
 #
 # Automatically generated file; DO NOT EDIT.
-# Linux/arm 3.13.11 Kernel Configuration
+# Linux/arm 3.14.16 Kernel Configuration
 #
 CONFIG_ARM=y
 CONFIG_SYS_SUPPORTS_APM_EMULATION=y
@@ -124,7 +124,6 @@ CONFIG_IPC_NS=y
 # CONFIG_USER_NS is not set
 CONFIG_PID_NS=y
 CONFIG_NET_NS=y
-# CONFIG_UIDGID_STRICT_TYPE_CHECKS is not set
 CONFIG_SCHED_AUTOGROUP=y
 CONFIG_MM_OWNER=y
 # CONFIG_SYSFS_DEPRECATED is not set
@@ -163,11 +162,14 @@ CONFIG_COMPAT_BRK=y
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
+# CONFIG_SYSTEM_TRUSTED_KEYRING is not set
 # CONFIG_PROFILING is not set
 CONFIG_HAVE_OPROFILE=y
 # CONFIG_KPROBES is not set
 # CONFIG_JUMP_LABEL is not set
 # CONFIG_HAVE_64BIT_ALIGNED_ACCESS is not set
+CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
+CONFIG_ARCH_USE_BUILTIN_BSWAP=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_ARCH_TRACEHOOK=y
@@ -183,6 +185,11 @@ CONFIG_HAVE_PERF_USER_STACK_DUMP=y
 CONFIG_HAVE_ARCH_JUMP_LABEL=y
 CONFIG_ARCH_WANT_IPC_PARSE_VERSION=y
 CONFIG_HAVE_ARCH_SECCOMP_FILTER=y
+CONFIG_HAVE_CC_STACKPROTECTOR=y
+# CONFIG_CC_STACKPROTECTOR is not set
+CONFIG_CC_STACKPROTECTOR_NONE=y
+# CONFIG_CC_STACKPROTECTOR_REGULAR is not set
+# CONFIG_CC_STACKPROTECTOR_STRONG is not set
 CONFIG_HAVE_CONTEXT_TRACKING=y
 CONFIG_HAVE_VIRT_CPU_ACCOUNTING_GEN=y
 CONFIG_HAVE_IRQ_TIME_ACCOUNTING=y
@@ -200,7 +207,6 @@ CONFIG_HAVE_GENERIC_DMA_COHERENT=y
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 CONFIG_BASE_SMALL=0
-# CONFIG_SYSTEM_TRUSTED_KEYRING is not set
 CONFIG_MODULES=y
 CONFIG_MODULE_FORCE_LOAD=y
 CONFIG_MODULE_UNLOAD=y
@@ -253,6 +259,7 @@ CONFIG_DEFAULT_CFQ=y
 CONFIG_DEFAULT_IOSCHED="cfq"
 CONFIG_ASN1=m
 CONFIG_UNINLINE_SPIN_UNLOCK=y
+CONFIG_ARCH_SUPPORTS_ATOMIC_RMW=y
 CONFIG_FREEZER=y
 
 #
@@ -283,8 +290,8 @@ CONFIG_ARCH_MULTIPLATFORM=y
 # CONFIG_ARCH_W90X900 is not set
 # CONFIG_ARCH_LPC32XX is not set
 # CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_MSM is not set
-# CONFIG_ARCH_SHMOBILE is not set
+# CONFIG_ARCH_MSM_NODT is not set
+# CONFIG_ARCH_SHMOBILE_LEGACY is not set
 # CONFIG_ARCH_RPC is not set
 # CONFIG_ARCH_SA1100 is not set
 # CONFIG_ARCH_S3C24XX is not set
@@ -309,9 +316,12 @@ CONFIG_ARCH_MULTI_V6_V7=y
 # CONFIG_ARCH_MULTI_CPU_AUTO is not set
 # CONFIG_ARCH_MVEBU is not set
 # CONFIG_ARCH_BCM is not set
+# CONFIG_ARCH_BERLIN is not set
 # CONFIG_GPIO_PCA953X is not set
 # CONFIG_ARCH_HIGHBANK is not set
+# CONFIG_ARCH_HI3xxx is not set
 # CONFIG_ARCH_KEYSTONE is not set
+# CONFIG_ARCH_MSM_DT is not set
 # CONFIG_ARCH_MXC is not set
 
 #
@@ -337,6 +347,7 @@ CONFIG_ARCH_OMAP4=y
 # CONFIG_SOC_OMAP5 is not set
 CONFIG_SOC_AM33XX=y
 # CONFIG_SOC_AM43XX is not set
+# CONFIG_SOC_DRA7XX is not set
 CONFIG_ARCH_OMAP2PLUS=y
 
 #
@@ -344,7 +355,6 @@ CONFIG_ARCH_OMAP2PLUS=y
 #
 CONFIG_ARCH_OMAP2PLUS_TYPICAL=y
 CONFIG_SOC_HAS_OMAP2_SDRC=y
-# CONFIG_SOC_DRA7XX is not set
 # CONFIG_SOC_OMAP3430 is not set
 # CONFIG_SOC_TI81XX is not set
 
@@ -475,6 +485,7 @@ CONFIG_ARCH_WANT_GENERAL_HUGETLB=y
 CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
 CONFIG_HAVE_MEMBLOCK=y
+CONFIG_NO_BOOTMEM=y
 # CONFIG_HAVE_BOOTMEM_INFO_NODE is not set
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
@@ -490,11 +501,11 @@ CONFIG_NEED_PER_CPU_KM=y
 # CONFIG_CLEANCACHE is not set
 # CONFIG_CMA is not set
 # CONFIG_ZBUD is not set
+# CONFIG_ZSMALLOC is not set
 CONFIG_FORCE_MAX_ZONEORDER=12
 CONFIG_ALIGNMENT_TRAP=y
 # CONFIG_UACCESS_WITH_MEMCPY is not set
 # CONFIG_SECCOMP is not set
-# CONFIG_CC_STACKPROTECTOR is not set
 CONFIG_SWIOTLB=y
 CONFIG_IOMMU_HELPER=y
 # CONFIG_XEN is not set
@@ -537,7 +548,6 @@ CONFIG_CPU_FREQ_GOV_POWERSAVE=y
 CONFIG_CPU_FREQ_GOV_USERSPACE=y
 CONFIG_CPU_FREQ_GOV_ONDEMAND=y
 CONFIG_CPU_FREQ_GOV_CONSERVATIVE=y
-CONFIG_GENERIC_CPUFREQ_CPU0=y
 
 #
 # ARM CPU frequency scaling drivers
@@ -678,7 +688,8 @@ CONFIG_HAVE_NET_DSA=y
 # CONFIG_NETLINK_DIAG is not set
 # CONFIG_NET_MPLS_GSO is not set
 # CONFIG_HSR is not set
-# CONFIG_NETPRIO_CGROUP is not set
+# CONFIG_CGROUP_NET_PRIO is not set
+# CONFIG_CGROUP_NET_CLASSID is not set
 CONFIG_NET_RX_BUSY_POLL=y
 CONFIG_BQL=y
 # CONFIG_BPF_JIT is not set
@@ -752,8 +763,8 @@ CONFIG_OF_ADDRESS=y
 CONFIG_OF_IRQ=y
 CONFIG_OF_NET=y
 CONFIG_OF_MDIO=y
-# CONFIG_PARPORT is not set
 CONFIG_ARCH_MIGHT_HAVE_PC_PARPORT=y
+# CONFIG_PARPORT is not set
 CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_NULL_BLK is not set
 # CONFIG_BLK_DEV_COW_COMMON is not set
@@ -1101,16 +1112,15 @@ CONFIG_I2C_GPIO=m
 CONFIG_I2C_OMAP=y
 # CONFIG_I2C_PCA_PLATFORM is not set
 # CONFIG_I2C_PXA_PCI is not set
-# CONFIG_I2C_SH_MOBILE is not set
 # CONFIG_I2C_SIMTEC is not set
 # CONFIG_I2C_XILINX is not set
-# CONFIG_I2C_RCAR is not set
 
 #
 # External I2C/SMBus adapter drivers
 #
 # CONFIG_I2C_DIOLAN_U2C is not set
 # CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_ROBOTFUZZ_OSIF is not set
 # CONFIG_I2C_TAOS_EVM is not set
 CONFIG_I2C_TINY_USB=m
 
@@ -1183,6 +1193,8 @@ CONFIG_PINMUX=y
 CONFIG_PINCONF=y
 CONFIG_GENERIC_PINCONF=y
 # CONFIG_DEBUG_PINCTRL is not set
+# CONFIG_PINCTRL_CAPRI is not set
+# CONFIG_PINCTRL_MSM8X74 is not set
 CONFIG_PINCTRL_SINGLE=y
 CONFIG_ARCH_HAVE_CUSTOM_GPIO_H=y
 CONFIG_ARCH_REQUIRE_GPIOLIB=y
@@ -1198,6 +1210,7 @@ CONFIG_GPIO_SYSFS=y
 # CONFIG_GPIO_GENERIC_PLATFORM is not set
 # CONFIG_GPIO_EM is not set
 # CONFIG_GPIO_RCAR is not set
+# CONFIG_GPIO_SCH311X is not set
 # CONFIG_GPIO_TS5500 is not set
 # CONFIG_GPIO_GRGPIO is not set
 
@@ -1339,6 +1352,7 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_MAX6697 is not set
 # CONFIG_SENSORS_MCP3021 is not set
 # CONFIG_SENSORS_NCT6775 is not set
+# CONFIG_SENSORS_NTC_THERMISTOR is not set
 # CONFIG_SENSORS_PC87360 is not set
 # CONFIG_SENSORS_PC87427 is not set
 # CONFIG_SENSORS_PCF8591 is not set
@@ -1385,6 +1399,7 @@ CONFIG_WATCHDOG_CORE=y
 # Watchdog Device Drivers
 #
 # CONFIG_SOFT_WATCHDOG is not set
+# CONFIG_GPIO_WATCHDOG is not set
 # CONFIG_DW_WATCHDOG is not set
 CONFIG_OMAP_WATCHDOG=y
 CONFIG_TWL4030_WATCHDOG=y
@@ -1432,6 +1447,7 @@ CONFIG_MFD_CORE=y
 # CONFIG_MFD_88PM800 is not set
 # CONFIG_MFD_88PM805 is not set
 # CONFIG_MFD_88PM860X is not set
+# CONFIG_MFD_MAX14577 is not set
 # CONFIG_MFD_MAX77686 is not set
 # CONFIG_MFD_MAX77693 is not set
 # CONFIG_MFD_MAX8907 is not set
@@ -1451,6 +1467,7 @@ CONFIG_MFD_CORE=y
 # CONFIG_MFD_STMPE is not set
 # CONFIG_MFD_SYSCON is not set
 CONFIG_MFD_TI_AM335X_TSCADC=y
+# CONFIG_MFD_LP3943 is not set
 # CONFIG_MFD_LP8788 is not set
 # CONFIG_MFD_PALMAS is not set
 # CONFIG_TPS6105X is not set
@@ -1489,6 +1506,7 @@ CONFIG_REGULATOR=y
 CONFIG_REGULATOR_FIXED_VOLTAGE=y
 # CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
 # CONFIG_REGULATOR_USERSPACE_CONSUMER is not set
+# CONFIG_REGULATOR_ACT8865 is not set
 # CONFIG_REGULATOR_AD5398 is not set
 # CONFIG_REGULATOR_DA9210 is not set
 # CONFIG_REGULATOR_FAN53555 is not set
@@ -1517,7 +1535,6 @@ CONFIG_REGULATOR_TWL4030=y
 #
 # Graphics support
 #
-# CONFIG_TEGRA_HOST1X is not set
 # CONFIG_DRM is not set
 # CONFIG_VGASTATE is not set
 # CONFIG_VIDEO_OUTPUT_CONTROL is not set
@@ -1646,18 +1663,6 @@ CONFIG_USB_DYNAMIC_MINORS=y
 # CONFIG_USB_R8A66597_HCD is not set
 # CONFIG_USB_RENESAS_USBHS_HCD is not set
 # CONFIG_USB_HCD_TEST_MODE is not set
-CONFIG_USB_MUSB_HDRC=y
-CONFIG_USB_MUSB_HOST=y
-# CONFIG_USB_MUSB_GADGET is not set
-# CONFIG_USB_MUSB_DUAL_ROLE is not set
-# CONFIG_USB_MUSB_TUSB6010 is not set
-# CONFIG_USB_MUSB_OMAP2PLUS is not set
-# CONFIG_USB_MUSB_AM35X is not set
-CONFIG_USB_MUSB_DSPS=y
-# CONFIG_USB_MUSB_UX500 is not set
-CONFIG_USB_MUSB_AM335X_CHILD=y
-CONFIG_USB_TI_CPPI41_DMA=y
-# CONFIG_MUSB_PIO_ONLY is not set
 CONFIG_USB_RENESAS_USBHS=y
 
 #
@@ -1696,7 +1701,20 @@ CONFIG_USB_STORAGE=y
 #
 # CONFIG_USB_MDC800 is not set
 # CONFIG_USB_MICROTEK is not set
+CONFIG_USB_MUSB_HDRC=y
+CONFIG_USB_MUSB_HOST=y
+# CONFIG_USB_MUSB_GADGET is not set
+# CONFIG_USB_MUSB_DUAL_ROLE is not set
+# CONFIG_USB_MUSB_TUSB6010 is not set
+# CONFIG_USB_MUSB_OMAP2PLUS is not set
+# CONFIG_USB_MUSB_AM35X is not set
+CONFIG_USB_MUSB_DSPS=y
+# CONFIG_USB_MUSB_UX500 is not set
+CONFIG_USB_MUSB_AM335X_CHILD=y
+CONFIG_USB_TI_CPPI41_DMA=y
+# CONFIG_MUSB_PIO_ONLY is not set
 # CONFIG_USB_DWC3 is not set
+# CONFIG_USB_DWC2 is not set
 # CONFIG_USB_CHIPIDEA is not set
 
 #
@@ -1733,6 +1751,7 @@ CONFIG_USB_SERIAL_FTDI_SIO=y
 # CONFIG_USB_SERIAL_METRO is not set
 # CONFIG_USB_SERIAL_MOS7720 is not set
 # CONFIG_USB_SERIAL_MOS7840 is not set
+# CONFIG_USB_SERIAL_MXUPORT is not set
 # CONFIG_USB_SERIAL_NAVMAN is not set
 # CONFIG_USB_SERIAL_PL2303 is not set
 # CONFIG_USB_SERIAL_OTI6858 is not set
@@ -1745,7 +1764,8 @@ CONFIG_USB_SERIAL_FTDI_SIO=y
 # CONFIG_USB_SERIAL_TI is not set
 # CONFIG_USB_SERIAL_CYBERJACK is not set
 # CONFIG_USB_SERIAL_XIRCOM is not set
-# CONFIG_USB_SERIAL_OPTION is not set
+CONFIG_USB_SERIAL_WWAN=y
+CONFIG_USB_SERIAL_OPTION=y
 # CONFIG_USB_SERIAL_OMNINET is not set
 # CONFIG_USB_SERIAL_OPTICON is not set
 # CONFIG_USB_SERIAL_XSENS_MT is not set
@@ -1786,6 +1806,7 @@ CONFIG_USB_SERIAL_FTDI_SIO=y
 # USB Physical Layer drivers
 #
 CONFIG_USB_PHY=y
+# CONFIG_USB_OTG_FSM is not set
 CONFIG_NOP_USB_XCEIV=y
 # CONFIG_OMAP_CONTROL_USB is not set
 # CONFIG_OMAP_USB3 is not set
@@ -1810,9 +1831,11 @@ CONFIG_USB_GADGET_STORAGE_NUM_BUFFERS=2
 #
 # CONFIG_USB_FUSB300 is not set
 # CONFIG_USB_FOTG210_UDC is not set
+# CONFIG_USB_GR_UDC is not set
 # CONFIG_USB_R8A66597 is not set
 CONFIG_USB_RENESAS_USBHS_UDC=y
 # CONFIG_USB_PXA27X is not set
+# CONFIG_USB_S3C_HSOTG is not set
 # CONFIG_USB_MV_UDC is not set
 # CONFIG_USB_MV_U3D is not set
 CONFIG_USB_M66592=y
@@ -1820,7 +1843,6 @@ CONFIG_USB_M66592=y
 # CONFIG_USB_DUMMY_HCD is not set
 CONFIG_USB_LIBCOMPOSITE=y
 CONFIG_USB_U_ETHER=y
-CONFIG_USB_U_RNDIS=y
 CONFIG_USB_F_ECM=y
 CONFIG_USB_F_SUBSET=y
 CONFIG_USB_F_RNDIS=y
@@ -1897,7 +1919,20 @@ CONFIG_LEDS_PWM=y
 #
 # LED Triggers
 #
-# CONFIG_LEDS_TRIGGERS is not set
+CONFIG_LEDS_TRIGGERS=y
+# CONFIG_LEDS_TRIGGER_TIMER is not set
+# CONFIG_LEDS_TRIGGER_ONESHOT is not set
+CONFIG_LEDS_TRIGGER_HEARTBEAT=y
+# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set
+# CONFIG_LEDS_TRIGGER_CPU is not set
+# CONFIG_LEDS_TRIGGER_GPIO is not set
+# CONFIG_LEDS_TRIGGER_DEFAULT_ON is not set
+
+#
+# iptables trigger is under Netfilter config (LED target)
+#
+CONFIG_LEDS_TRIGGER_TRANSIENT=y
+# CONFIG_LEDS_TRIGGER_CAMERA is not set
 # CONFIG_ACCESSIBILITY is not set
 # CONFIG_EDAC is not set
 CONFIG_RTC_LIB=y
@@ -1923,10 +1958,12 @@ CONFIG_RTC_INTF_DEV=y
 # CONFIG_RTC_DRV_DS1374 is not set
 # CONFIG_RTC_DRV_DS1672 is not set
 # CONFIG_RTC_DRV_DS3232 is not set
+# CONFIG_RTC_DRV_HYM8563 is not set
 # CONFIG_RTC_DRV_MAX6900 is not set
 # CONFIG_RTC_DRV_RS5C372 is not set
 # CONFIG_RTC_DRV_ISL1208 is not set
 # CONFIG_RTC_DRV_ISL12022 is not set
+# CONFIG_RTC_DRV_ISL12057 is not set
 # CONFIG_RTC_DRV_X1205 is not set
 # CONFIG_RTC_DRV_PCF2127 is not set
 # CONFIG_RTC_DRV_PCF8523 is not set
@@ -2027,7 +2064,6 @@ CONFIG_STAGING=y
 # CONFIG_RTS5139 is not set
 # CONFIG_TRANZPORT is not set
 # CONFIG_USB_SERIAL_QUATECH2 is not set
-# CONFIG_ZSMALLOC is not set
 # CONFIG_USB_ENESTORAGE is not set
 # CONFIG_BCM_WIMAX is not set
 # CONFIG_FT1000 is not set
@@ -2049,7 +2085,6 @@ CONFIG_STAGING=y
 # CONFIG_LTE_GDM724X is not set
 # CONFIG_CED1401 is not set
 # CONFIG_DGRP is not set
-# CONFIG_USB_DWC2 is not set
 # CONFIG_LUSTRE_FS is not set
 # CONFIG_XILLYBUS is not set
 # CONFIG_DGAP is not set
@@ -2060,8 +2095,9 @@ CONFIG_COMMON_CLK=y
 #
 # Common Clock Framework
 #
-CONFIG_COMMON_CLK_DEBUG=y
 # CONFIG_COMMON_CLK_SI5351 is not set
+# CONFIG_COMMON_CLK_SI570 is not set
+# CONFIG_COMMON_CLK_QCOM is not set
 
 #
 # Hardware Spinlock drivers
@@ -2076,7 +2112,6 @@ CONFIG_OF_IOMMU=y
 CONFIG_OMAP_IOMMU=y
 CONFIG_OMAP_IOVMM=y
 # CONFIG_OMAP_IOMMU_DEBUG is not set
-# CONFIG_SHMOBILE_IOMMU is not set
 
 #
 # Remoteproc drivers
@@ -2153,7 +2188,6 @@ CONFIG_FANOTIFY=y
 # CONFIG_QUOTACTL is not set
 # CONFIG_AUTOFS4_FS is not set
 # CONFIG_FUSE_FS is not set
-CONFIG_GENERIC_ACL=y
 
 #
 # Caches
@@ -2287,8 +2321,7 @@ CONFIG_DEBUG_FS=y
 # CONFIG_HEADERS_CHECK is not set
 # CONFIG_DEBUG_SECTION_MISMATCH is not set
 # CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
-CONFIG_MAGIC_SYSRQ=y
-CONFIG_MAGIC_SYSRQ_DEFAULT_ENABLE=0x1
+# CONFIG_MAGIC_SYSRQ is not set
 CONFIG_DEBUG_KERNEL=y
 
 #
@@ -2317,6 +2350,7 @@ CONFIG_DEFAULT_HUNG_TASK_TIMEOUT=300
 CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
 # CONFIG_PANIC_ON_OOPS is not set
 CONFIG_PANIC_ON_OOPS_VALUE=0
+CONFIG_PANIC_TIMEOUT=0
 CONFIG_SCHED_DEBUG=y
 CONFIG_SCHEDSTATS=y
 CONFIG_TIMER_STATS=y
@@ -2379,9 +2413,12 @@ CONFIG_TRACING_SUPPORT=y
 # CONFIG_TEST_STRING_HELPERS is not set
 # CONFIG_TEST_KSTRTOX is not set
 # CONFIG_DMA_API_DEBUG is not set
+# CONFIG_TEST_MODULE is not set
+# CONFIG_TEST_USER_COPY is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_KGDB is not set
+# CONFIG_ARM_PTDUMP is not set
 # CONFIG_STRICT_DEVMEM is not set
 CONFIG_ARM_UNWIND=y
 # CONFIG_DEBUG_USER is not set
@@ -2391,6 +2428,7 @@ CONFIG_DEBUG_LL_INCLUDE="mach/debug-macro.S"
 # CONFIG_DEBUG_UART_8250 is not set
 CONFIG_UNCOMPRESS_INCLUDE="debug/uncompress.h"
 # CONFIG_PID_IN_CONTEXTIDR is not set
+# CONFIG_DEBUG_SET_MODULE_RONX is not set
 
 #
 # Security options

systems/lctr-b2xx/lauv-dolphin-2-aux.cfg

@@ -0,0 +1,6 @@
+cfg_hostname='lauv-dolphin-2-aux'
+cfg_storage='data0:ext4:/opt data1:ext4:/opt/lsts/dune/log'
+cfg_eth_ext_ip='10.0.10.143'
+cfg_eth_ext_mk='255.255.0.0'
+cfg_eth_ext_gw='10.0.0.1'
+cfg_ptpd_interface='eth0'

systems/lctr-b2xx/lauv-dolphin-3-aux.cfg

@@ -0,0 +1,6 @@
+cfg_hostname='lauv-dolphin-3-aux'
+cfg_storage='data0:ext4:/opt data1:ext4:/opt/lsts/dune/log'
+cfg_eth_ext_ip='10.0.10.153'
+cfg_eth_ext_mk='255.255.0.0'
+cfg_eth_ext_gw='10.0.0.1'
+cfg_ptpd_interface='eth0'

systems/lctr-b2xx/lauv-noptilus-3-aux.cfg

@@ -0,0 +1,6 @@
+cfg_hostname='lauv-noptilus-3-aux'
+cfg_storage='data0:ext4:/opt data1:ext4:/opt/lsts/dune/log'
+cfg_eth_ext_ip='10.0.10.103'
+cfg_eth_ext_mk='255.255.0.0'
+cfg_eth_ext_gw='10.0.0.1'
+cfg_ptpd_interface='eth0'

systems/lctr-b2xx/leviathan.cfg

@@ -0,0 +1,6 @@
+cfg_hostname='leviathan'
+cfg_storage='data0:ext4:/opt'
+cfg_eth_ext_ip='10.0.200.2'
+cfg_eth_ext_mk='255.255.0.0'
+cfg_eth_ext_gw='10.0.0.1'
+cfg_packages="$cfg_packages uswitch"

systems/lctr-b2xx/mariner-01.cfg

@@ -0,0 +1,6 @@
+cfg_hostname='mariner-01'
+cfg_storage='data0:ext4:/opt'
+cfg_eth_ext_ip='10.0.20.125'
+cfg_eth_ext_mk='255.255.0.0'
+cfg_eth_ext_gw='10.0.0.1'
+cfg_packages='u-boot dropbear rsync busybox e2fsprogs ptpd i2c-tools am33xx-cm3/host linux libav'

systems/lctr-b2xx/ntnu-hexa-001.cfg

@@ -0,0 +1,8 @@
+# ntnu-hexa-00x
+cfg_hostname='ntnu-hexa-001'
+cfg_eth_ext_ip='192.168.1.200'
+cfg_eth_ext_mk='255.255.255.0'
+cfg_eth_ext_gw='192.168.1.1'
+cfg_ptpd_interface='eth0'
+cfg_target_linux_dtb='arch/arm/boot/dts/am335x-lctr-b2xx-ntnu-uart.dtb'
+cfg_packages='u-boot dropbear rsync busybox e2fsprogs ptpd i2c-tools am33xx-cm3/host linux libswiftnav'

systems/lctr-b2xx/ntnu-hexa-002.cfg

@@ -0,0 +1,8 @@
+# ntnu-hexa-00x
+cfg_hostname='ntnu-hexa-002'
+cfg_eth_ext_ip='192.168.1.205'
+cfg_eth_ext_mk='255.255.255.0'
+cfg_eth_ext_gw='192.168.1.1'
+cfg_ptpd_interface='eth0'
+cfg_target_linux_dtb='arch/arm/boot/dts/am335x-lctr-b2xx-ntnu-uart.dtb'
+cfg_packages='u-boot dropbear rsync busybox e2fsprogs ptpd i2c-tools am33xx-cm3/host linux libswiftnav'

systems/lctr-b2xx/ntnu-hexa-003.cfg

@@ -0,0 +1,8 @@
+# ntnu-hexa-00x
+cfg_hostname='ntnu-hexa-003'
+cfg_eth_ext_ip='192.168.1.210'
+cfg_eth_ext_mk='255.255.255.0'
+cfg_eth_ext_gw='192.168.1.1'
+cfg_ptpd_interface='eth0'
+cfg_target_linux_dtb='arch/arm/boot/dts/am335x-lctr-b2xx-ntnu-uart.dtb'
+cfg_packages='u-boot dropbear rsync busybox e2fsprogs ptpd i2c-tools am33xx-cm3/host linux libswiftnav'

systems/lctr-b2xx/ntnu-hexa-004.cfg

@@ -0,0 +1,8 @@
+# ntnu-hexa-00x
+cfg_hostname='ntnu-hexa-004'
+cfg_eth_ext_ip='192.168.1.215'
+cfg_eth_ext_mk='255.255.255.0'
+cfg_eth_ext_gw='192.168.1.1'
+cfg_ptpd_interface='eth0'
+cfg_target_linux_dtb='arch/arm/boot/dts/am335x-lctr-b2xx-ntnu-uart.dtb'
+cfg_packages='u-boot dropbear rsync busybox e2fsprogs ptpd i2c-tools am33xx-cm3/host linux libswiftnav'

systems/lctr-b2xx/ntnu-hexa-testbed.cfg

@@ -0,0 +1,8 @@
+# ntnu-hexa-00x
+cfg_hostname='ntnu-hexa-testbed'
+cfg_eth_ext_ip='192.168.1.220'
+cfg_eth_ext_mk='255.255.255.0'
+cfg_eth_ext_gw='192.168.1.1'
+cfg_ptpd_interface='eth0'
+cfg_target_linux_dtb='arch/arm/boot/dts/am335x-lctr-b2xx-ntnu-uart.dtb'
+cfg_packages='u-boot dropbear rsync busybox e2fsprogs ptpd i2c-tools am33xx-cm3/host linux libswiftnav'

systems/lctr-b2xx/ntnu-nest-01.cfg

@@ -0,0 +1,8 @@
+# ntnu-nest-0x
+cfg_hostname='ntnu-nest-01'
+cfg_eth_ext_ip='192.168.1.45'
+cfg_eth_ext_mk='255.255.255.0'
+cfg_eth_ext_gw='192.168.1.1'
+cfg_ptpd_interface='eth0'
+cfg_target_linux_dtb='arch/arm/boot/dts/am335x-lctr-b2xx-ntnu-gpio.dtb'
+cfg_packages='u-boot dropbear rsync busybox e2fsprogs ptpd i2c-tools am33xx-cm3/host linux libswiftnav'

systems/lctr-b2xx/ntnu-nest-02.cfg

@@ -0,0 +1,8 @@
+# ntnu-nest-0x
+cfg_hostname='ntnu-nest-02'
+cfg_eth_ext_ip='192.168.1.46'
+cfg_eth_ext_mk='255.255.255.0'
+cfg_eth_ext_gw='192.168.1.1'
+cfg_ptpd_interface='eth0'
+cfg_target_linux_dtb='arch/arm/boot/dts/am335x-lctr-b2xx-ntnu-gpio.dtb'
+cfg_packages='u-boot dropbear rsync busybox e2fsprogs ptpd i2c-tools am33xx-cm3/host linux libswiftnav'

systems/lctr-b2xx/ntnu-penguin-001.cfg

@@ -0,0 +1,8 @@
+# ntnu-penguin-00x
+# Adds libav package. 
+cfg_hostname='ntnu-penguin-001'
+cfg_eth_ext_ip='192.168.1.235'
+cfg_eth_ext_mk='255.255.255.0'
+cfg_eth_ext_gw='192.168.1.1'
+cfg_ptpd_interface='eth0'
+cfg_packages='u-boot dropbear rsync busybox e2fsprogs ptpd i2c-tools am33xx-cm3/host linux libav'

systems/lctr-b2xx/ntnu-x8-001.cfg

@@ -0,0 +1,9 @@
+# ntnu-x8-00x
+# Adds libav package. 
+cfg_hostname='ntnu-x8-001'
+cfg_eth_ext_ip='192.168.1.100'
+cfg_eth_ext_mk='255.255.255.0'
+cfg_eth_ext_gw='192.168.1.1'
+cfg_ptpd_interface='eth0'
+cfg_target_linux_dtb='arch/arm/boot/dts/am335x-lctr-b2xx-ntnu-gpio.dtb'
+cfg_packages='u-boot dropbear rsync busybox e2fsprogs ptpd i2c-tools am33xx-cm3/host linux libav libswiftnav'

systems/lctr-b2xx/ntnu-x8-002.cfg

@@ -0,0 +1,9 @@
+# ntnu-x8-00x
+# Adds libav package. 
+cfg_hostname='ntnu-x8-002'
+cfg_eth_ext_ip='192.168.1.105'
+cfg_eth_ext_mk='255.255.255.0'
+cfg_eth_ext_gw='192.168.1.1'
+cfg_ptpd_interface='eth0'
+cfg_target_linux_dtb='arch/arm/boot/dts/am335x-lctr-b2xx-ntnu-gpio.dtb'
+cfg_packages='u-boot dropbear rsync busybox e2fsprogs ptpd i2c-tools am33xx-cm3/host linux libav libswiftnav'

systems/lctr-b2xx/ntnu-x8-003.cfg

@@ -0,0 +1,9 @@
+# ntnu-x8-00x
+# Adds libav package. 
+cfg_hostname='ntnu-x8-003'
+cfg_eth_ext_ip='192.168.1.110'
+cfg_eth_ext_mk='255.255.255.0'
+cfg_eth_ext_gw='192.168.1.1'
+cfg_ptpd_interface='eth0'
+cfg_target_linux_dtb='arch/arm/boot/dts/am335x-lctr-b2xx-ntnu-gpio.dtb'
+cfg_packages='u-boot dropbear rsync busybox e2fsprogs ptpd i2c-tools am33xx-cm3/host linux libav libswiftnav'

systems/lctr-b2xx/ntnu-x8-004.cfg

@@ -0,0 +1,9 @@
+# ntnu-x8-00x
+# Adds libav package. 
+cfg_hostname='ntnu-x8-004'
+cfg_eth_ext_ip='192.168.1.115'
+cfg_eth_ext_mk='255.255.255.0'
+cfg_eth_ext_gw='192.168.1.1'
+cfg_ptpd_interface='eth0'
+cfg_target_linux_dtb='arch/arm/boot/dts/am335x-lctr-b2xx-ntnu-gpio.dtb'
+cfg_packages='u-boot dropbear rsync busybox e2fsprogs ptpd i2c-tools am33xx-cm3/host linux libav libswiftnav'

systems/lctr-b2xx/ntnu-x8-005.cfg

@@ -0,0 +1,9 @@
+# ntnu-x8-00x
+# Adds libav package. 
+cfg_hostname='ntnu-x8-005'
+cfg_eth_ext_ip='192.168.1.120'
+cfg_eth_ext_mk='255.255.255.0'
+cfg_eth_ext_gw='192.168.1.1'
+cfg_ptpd_interface='eth0'
+cfg_target_linux_dtb='arch/arm/boot/dts/am335x-lctr-b2xx-ntnu-gpio.dtb'
+cfg_packages='u-boot dropbear rsync busybox e2fsprogs ptpd i2c-tools am33xx-cm3/host linux libav libswiftnav'

systems/lctr-b2xx/ntnu-x8-006.cfg

@@ -0,0 +1,9 @@
+# ntnu-x8-00x
+# Adds libav package. 
+cfg_hostname='ntnu-x8-006'
+cfg_eth_ext_ip='192.168.1.125'
+cfg_eth_ext_mk='255.255.255.0'
+cfg_eth_ext_gw='192.168.1.1'
+cfg_ptpd_interface='eth0'
+cfg_target_linux_dtb='arch/arm/boot/dts/am335x-lctr-b2xx-ntnu-gpio.dtb'
+cfg_packages='u-boot dropbear rsync busybox e2fsprogs ptpd i2c-tools am33xx-cm3/host linux libav libswiftnav'

systems/lctr-b2xx/ntnu-x8-007.cfg

@@ -0,0 +1,9 @@
+# ntnu-x8-00x
+# Adds libav package. 
+cfg_hostname='ntnu-x8-007'
+cfg_eth_ext_ip='192.168.1.130'
+cfg_eth_ext_mk='255.255.255.0'
+cfg_eth_ext_gw='192.168.1.1'
+cfg_ptpd_interface='eth0'
+cfg_target_linux_dtb='arch/arm/boot/dts/am335x-lctr-b2xx-ntnu-gpio.dtb'
+cfg_packages='u-boot dropbear rsync busybox e2fsprogs ptpd i2c-tools am33xx-cm3/host linux libav libswiftnav'

systems/lctr-b2xx/ntnu-x8-008.cfg

@@ -0,0 +1,9 @@
+# ntnu-x8-00x
+# Adds libav package. 
+cfg_hostname='ntnu-x8-008'
+cfg_eth_ext_ip='192.168.1.135'
+cfg_eth_ext_mk='255.255.255.0'
+cfg_eth_ext_gw='192.168.1.1'
+cfg_ptpd_interface='eth0'
+cfg_target_linux_dtb='arch/arm/boot/dts/am335x-lctr-b2xx-ntnu-gpio.dtb'
+cfg_packages='u-boot dropbear rsync busybox e2fsprogs ptpd i2c-tools am33xx-cm3/host linux libav libswiftnav'

systems/lctr-b2xx/ntnu-x8-009.cfg

@@ -0,0 +1,9 @@
+# ntnu-x8-00x
+# Adds libav package. 
+cfg_hostname='ntnu-x8-009'
+cfg_eth_ext_ip='192.168.1.140'
+cfg_eth_ext_mk='255.255.255.0'
+cfg_eth_ext_gw='192.168.1.1'
+cfg_ptpd_interface='eth0'
+cfg_target_linux_dtb='arch/arm/boot/dts/am335x-lctr-b2xx-ntnu-gpio.dtb'
+cfg_packages='u-boot dropbear rsync busybox e2fsprogs ptpd i2c-tools am33xx-cm3/host linux libav libswiftnav'

systems/lctr-b2xx/ntnu-x8-010.cfg

@@ -0,0 +1,9 @@
+# ntnu-x8-00x
+# Adds libav package. 
+cfg_hostname='ntnu-x8-010'
+cfg_eth_ext_ip='192.168.1.145'
+cfg_eth_ext_mk='255.255.255.0'
+cfg_eth_ext_gw='192.168.1.1'
+cfg_ptpd_interface='eth0'
+cfg_target_linux_dtb='arch/arm/boot/dts/am335x-lctr-b2xx-ntnu-gpio.dtb'
+cfg_packages='u-boot dropbear rsync busybox e2fsprogs ptpd i2c-tools am33xx-cm3/host linux libav libswiftnav'

systems/lctr-b2xx/patches/libswiftnav/arith.patch

@@ -0,0 +1,11 @@
+diff -Nru libswiftnav-0.11/clapack-3.2.1-CMAKE/F2CLIBS/libf2c/arith_cortex-a8.h libswiftnav-0.11.kk/clapack-3.2.1-CMAKE/F2CLIBS/libf2c/arith_cortex-a8.h
+--- libswiftnav-0.11/clapack-3.2.1-CMAKE/F2CLIBS/libf2c/arith_cortex-a8.h	1970-01-01 01:00:00.000000000 +0100
++++ libswiftnav-0.11.kk/clapack-3.2.1-CMAKE/F2CLIBS/libf2c/arith_cortex-a8.h	2014-10-23 08:28:34.888000000 +0200
+@@ -0,0 +1,7 @@
++/* arith.h definitions for ARM Cortex-A8
++ * Calculated by running arithchk on a Beaglebone Black. */
++#define IEEE_8087
++#define Arith_Kind_ASL 1
++#define Double_Align
++#define QNaN0 0x0
++#define QNaN1 0x7ff80000

systems/lctr-b2xx/patches/linux/3.14.16/00-lctr-b2xx-ntnu-x-dts.patch

@@ -0,0 +1,128 @@
+diff -ruN linux-3.14.16/arch/arm/boot/dts/am335x-lctr-b2xx-ntnu-gpio.dts linux-3.14.16.kk/arch/arm/boot/dts/am335x-lctr-b2xx-ntnu-gpio.dts
+--- linux-3.14.16/arch/arm/boot/dts/am335x-lctr-b2xx-ntnu-gpio.dts	1970-01-01 01:00:00.000000000 +0100
++++ linux-3.14.16.kk/arch/arm/boot/dts/am335x-lctr-b2xx-ntnu-gpio.dts	2014-10-23 13:22:18.216000000 +0200
+@@ -0,0 +1,56 @@
++/*
++ * Copyright (C) 2014 Universidade do Porto - Faculdade de Engenharia
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as
++ * published by the Free Software Foundation.
++ */
++
++#include "am335x-lctr-b2xx.dts"
++
++
++/ {
++	/* GPIO. */
++	ntnu_gpio {
++		pinctrl-names = "default";
++		pinctrl-0 = <&gpio_pins>;
++		compatible = "ntnu-gpio";
++		status = "okay";
++	};
++};
++
++&am33xx_pinmux {
++        pinctrl-names = "default";
++        pinctrl-0 = <&board_pins>;
++
++
++
++	/* GPIO on UART2-pins. */
++	gpio_pins: pinmux_gpio_pins {
++		pinctrl-single,pins = <
++			/* GPIO 2 - Pin 22 */
++			0x150 (PIN_INPUT_PULLDOWN | MUX_MODE7)
++			/* GPIO 3 - Pin 21 */
++			0x154 (PIN_OUTPUT_PULLDOWN | MUX_MODE7)
++		>;
++	};
++
++	/* UART4. */
++	uart4_pins: pinmux_uart4_pins {
++		pinctrl-single,pins = <
++			/* uart4_rxd */
++			0x70 (PIN_INPUT_PULLUP | MUX_MODE6)
++			/* uart4_txd */
++			0x74 (PIN_OUTPUT_PULLDOWN | MUX_MODE6)
++		>;
++	};
++};
++
++
++
++/* Enable UART4. */
++&uart4 {
++	pinctrl-names = "default";
++	pinctrl-0 = <&uart4_pins>;
++	status = "okay";
++};
+diff -ruN linux-3.14.16/arch/arm/boot/dts/am335x-lctr-b2xx-ntnu-uart.dts linux-3.14.16.kk/arch/arm/boot/dts/am335x-lctr-b2xx-ntnu-uart.dts
+--- linux-3.14.16/arch/arm/boot/dts/am335x-lctr-b2xx-ntnu-uart.dts	1970-01-01 01:00:00.000000000 +0100
++++ linux-3.14.16.kk/arch/arm/boot/dts/am335x-lctr-b2xx-ntnu-uart.dts	2014-10-20 21:35:33.608000000 +0200
+@@ -0,0 +1,52 @@
++/*
++ * Copyright (C) 2014 Universidade do Porto - Faculdade de Engenharia
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as
++ * published by the Free Software Foundation.
++ */
++
++#include "am335x-lctr-b2xx.dts"
++
++
++
++&am33xx_pinmux {
++        pinctrl-names = "default";
++        pinctrl-0 = <&board_pins>;
++
++
++
++	/* UART2. */
++	uart2_pins: pinmux_uart2_pins {
++		pinctrl-single,pins = <
++			/* uart2_rxd */
++			0x150 (PIN_INPUT_PULLUP | MUX_MODE1)
++			/* uart2_txd */
++			0x154 (PIN_OUTPUT_PULLDOWN | MUX_MODE1)
++		>;
++	};
++
++	/* UART4. */
++	uart4_pins: pinmux_uart4_pins {
++		pinctrl-single,pins = <
++			/* uart4_rxd */
++			0x70 (PIN_INPUT_PULLUP | MUX_MODE6)
++			/* uart4_txd */
++			0x74 (PIN_OUTPUT_PULLDOWN | MUX_MODE6)
++		>;
++	};
++};
++
++/* Enable UART2. */
++&uart2 {
++	pinctrl-names = "default";
++	pinctrl-0 = <&uart2_pins>;
++	status = "okay";
++};
++
++/* Enable UART4. */
++&uart4 {
++	pinctrl-names = "default";
++	pinctrl-0 = <&uart4_pins>;
++	status = "okay";
++};
+diff -ruN linux-3.14.16/arch/arm/boot/dts/Makefile linux-3.14.16.kk/arch/arm/boot/dts/Makefile
+--- linux-3.14.16/arch/arm/boot/dts/Makefile	2014-08-08 01:50:59.000000000 +0200
++++ linux-3.14.16.kk/arch/arm/boot/dts/Makefile	2014-10-23 13:24:50.292000000 +0200
+@@ -227,6 +227,8 @@
+ 	am335x-bone.dtb \
+ 	am335x-boneblack.dtb \
+ 	am335x-nano.dtb \
++	am335x-lctr-b2xx-ntnu-uart.dtb \
++	am335x-lctr-b2xx-ntnu-gpio.dtb \
+ 	am335x-base0033.dtb \
+ 	am3517-evm.dtb \
+ 	am3517_mt_ventoux.dtb \

systems/lctr-b2xx/patches/linux/3.14.16/0007-cpsw-search-for-phy.patch

@@ -0,0 +1,136 @@
+From 83ad4305da1128111b2f063e41a740d1e19836c8 Mon Sep 17 00:00:00 2001
+From: Jay at Control Module Industries <cmidroid@gmail.com>
+Date: Tue, 1 Jul 2014 14:49:52 -0500
+Subject: [PATCH 7/7] cpsw: search for phy
+
+I have encountered the same issue(s) on A6A boards.
+
+I couldn't find a patch,  so I wrote this patch to update the device tree
+in the davinci_mdio driver in the 3.15.1 tree, it seems to correct it. I
+would welcome any input on a different approach.
+
+https://groups.google.com/d/msg/beagleboard/9mctrG26Mc8/SRlnumt0LoMJ
+
+Signed-off-by: Robert Nelson <robertcnelson@gmail.com>
+---
+ drivers/net/ethernet/ti/davinci_mdio.c | 83 ++++++++++++++++++++++++++++++++++
+ 1 file changed, 83 insertions(+)
+
+diff --git a/drivers/net/ethernet/ti/davinci_mdio.c b/drivers/net/ethernet/ti/davinci_mdio.c
+index 0cca9de..0197edd 100644
+--- a/drivers/net/ethernet/ti/davinci_mdio.c
++++ b/drivers/net/ethernet/ti/davinci_mdio.c
+@@ -39,6 +39,7 @@
+ #include <linux/of.h>
+ #include <linux/of_device.h>
+ #include <linux/pinctrl/consumer.h>
++#include <linux/phy.h>
+ 
+ /*
+  * This timeout definition is a worst-case ultra defensive measure against
+@@ -97,6 +98,10 @@ struct davinci_mdio_data {
+ 	unsigned long	access_time; /* jiffies */
+ };
+ 
++#if IS_ENABLED(CONFIG_OF)
++static void davinci_mdio_update_dt_from_phymask(u32 phy_mask);
++#endif
++
+ static void __davinci_mdio_reset(struct davinci_mdio_data *data)
+ {
+ 	u32 mdio_in, div, mdio_out_khz, access_time;
+@@ -150,6 +155,11 @@ static int davinci_mdio_reset(struct mii_bus *bus)
+ 		/* restrict mdio bus to live phys only */
+ 		dev_info(data->dev, "detected phy mask %x\n", ~phy_mask);
+ 		phy_mask = ~phy_mask;
++
++		#if IS_ENABLED(CONFIG_OF)
++		davinci_mdio_update_dt_from_phymask(phy_mask);
++		#endif
++
+ 	} else {
+ 		/* desperately scan all phys */
+ 		dev_warn(data->dev, "no live phy, scanning all\n");
+@@ -312,6 +322,79 @@ static int davinci_mdio_probe_dt(struct mdio_platform_data *data,
+ }
+ #endif
+ 
++#if IS_ENABLED(CONFIG_OF)
++static void davinci_mdio_update_dt_from_phymask(u32 phy_mask)
++{
++	int i, len;
++	u32 addr;
++	__be32 *old_phy_p, *phy_id_p;
++	struct property *phy_id_property = NULL;
++	struct device_node *node_p, *slave_p;
++
++	addr = 0;
++
++	for (i = 0; i < PHY_MAX_ADDR; i++) {
++		if ((phy_mask & (1 << i)) == 0) {
++			addr = (u32) i;
++		break;
++		}
++	}
++
++	for_each_compatible_node(node_p, NULL, "ti,cpsw") {
++		for_each_node_by_name(slave_p, "slave") {
++
++			old_phy_p = (__be32 *) of_get_property(slave_p, "phy_id", &len);
++
++			if (len != (sizeof(__be32 *) * 2))
++				goto err_out;
++
++			if (old_phy_p) {
++
++				phy_id_property = kzalloc(sizeof(*phy_id_property), GFP_KERNEL);
++
++				if (! phy_id_property)
++					goto err_out;
++
++				phy_id_property->length = len;
++				phy_id_property->name = kstrdup("phy_id", GFP_KERNEL);
++				phy_id_property->value = kzalloc(len, GFP_KERNEL);
++
++				if (! phy_id_property->name)
++					goto err_out;
++
++				if (! phy_id_property->value)
++					goto err_out;
++
++				memcpy(phy_id_property->value, old_phy_p, len);
++
++				phy_id_p = (__be32 *) phy_id_property->value + 1;
++
++				*phy_id_p = cpu_to_be32(addr);
++
++				of_update_property(slave_p, phy_id_property);
++
++				++addr;
++			}
++		}
++	}
++
++	return;
++
++err_out:
++
++	if (phy_id_property) {
++		if (phy_id_property->name)
++			kfree(phy_id_property->name);
++
++	if (phy_id_property->value)
++		kfree(phy_id_property->value);
++
++	if (phy_id_property)
++		kfree(phy_id_property);
++	}
++}
++#endif
++
+ static int davinci_mdio_probe(struct platform_device *pdev)
+ {
+ 	struct mdio_platform_data *pdata = dev_get_platdata(&pdev->dev);
+-- 
+2.0.0
+

systems/lctr-b2xx/patches/u-boot/2014.07/01-am335x-bbb.patch

@@ -1,21 +1,18 @@
 diff --git a/boards.cfg b/boards.cfg
-index 2128996..0d9abd8 100644
+index 1ba2081..08dc221 100644
 --- a/boards.cfg
 +++ b/boards.cfg
-@@ -256,6 +256,7 @@ Active  arm         armv7          am33xx      siemens         dxr2
- Active  arm         armv7          am33xx      siemens         pxm2                pxm2                                 -                                                                                                                                 Roger Meier <r.meier@siemens.com>
- Active  arm         armv7          am33xx      siemens         rut                 rut                                  -                                                                                                                                 Roger Meier <r.meier@siemens.com>
- Active  arm         armv7          am33xx      ti              am335x              am335x_boneblack                     am335x_evm:SERIAL1,CONS_INDEX=1,EMMC_BOOT                                                                                         Tom Rini <trini@ti.com>
-+Active  arm         armv7          am33xx      ti              am335x              am335x_bbb                           am335x_bbb:SERIAL1,CONS_INDEX=1                                                                                                   Ricardo Martins <rasm@fe.up.pt>
- Active  arm         armv7          am33xx      ti              am335x              am335x_evm                           am335x_evm:SERIAL1,CONS_INDEX=1,NAND                                                                                              Tom Rini <trini@ti.com>
- Active  arm         armv7          am33xx      ti              am335x              am335x_evm_nor                       am335x_evm:SERIAL1,CONS_INDEX=1,NAND,NOR                                                                                          Tom Rini <trini@ti.com>
- Active  arm         armv7          am33xx      ti              am335x              am335x_evm_norboot                   am335x_evm:SERIAL1,CONS_INDEX=1,NOR,NOR_BOOT                                                                                      Tom Rini <trini@ti.com>
+@@ -1218,3 +1218,4 @@ Orphan  powerpc     ppc4xx         -           sandburst       metrobox
+ # The following were move to "Orphan" in September, 2013
+ Orphan  arm         arm1136        mx31        -               imx31_phycore       imx31_phycore_eet                     imx31_phycore:IMX31_PHYCORE_EET                                                                                                   (resigned) Guennadi Liakhovetski <g.liakhovetski@gmx.de>
+ Orphan  arm         arm1136        mx31        freescale       mx31ads             mx31ads                               -                                                                                                                                 (resigned) Guennadi Liakhovetski <g.liakhovetski@gmx.de>
++Active  arm         armv7          am33xx      ti              am335x              am335x_bbb                           am335x_bbb:SERIAL1,CONS_INDEX=1                                                                                                    Ricardo Martins <rasm@fe.up.pt>
 diff --git a/include/configs/am335x_bbb.h b/include/configs/am335x_bbb.h
 new file mode 100644
-index 0000000..89c5835
+index 0000000..9e00817
 --- /dev/null
 +++ b/include/configs/am335x_bbb.h
-@@ -0,0 +1,135 @@
+@@ -0,0 +1,138 @@
 +/*
 + * am335x_evm.h
 + *
@@ -37,10 +34,13 @@ index 0000000..89c5835
 +#include <configs/ti_am335x_common.h>
 +
 +#ifdef CONFIG_BOOTDELAY
-+#  undef CONFIG_BOOTDELAY
++#  undef CONFIG_BOOTLDELAY
 +#endif
-+#define CONFIG_BOOTDELAY 0
-+#define CONFIG_ZERO_BOOTDELAY_CHECK 1
++#define CONFIG_BOOTDELAY 2
++#define CONFIG_AUTOBOOT_KEYED 1
++#define CONFIG_AUTOBOOT_DELAY_STR "uboot"
++#define CONFIG_AUTOBOOT_PROMPT \
++			"autoboot in %d seconds\n",bootdelay
 +
 +#undef CONFIG_BOOTM_NETBSD
 +#undef CONFIG_BOOTM_PLAN9

systems/lctr-b2xx/x8-01.cfg

@@ -0,0 +1,6 @@
+cfg_hostname='x8-01'
+cfg_storage='data0:ext4:/opt'
+cfg_eth_ext_ip='10.0.20.100'
+cfg_eth_ext_mk='255.255.0.0'
+cfg_eth_ext_gw='10.0.0.1'
+cfg_packages='u-boot dropbear rsync busybox e2fsprogs ptpd i2c-tools am33xx-cm3/host linux libav'

systems/lctr-b2xx/x8-03.cfg

@@ -3,5 +3,4 @@ cfg_storage='data0:ext4:/opt'
 cfg_eth_ext_ip='10.0.20.110'
 cfg_eth_ext_mk='255.255.0.0'
 cfg_eth_ext_gw='10.0.0.1'
-cfg_ptpd_interface='eth0'
-cfg_packages='dropbear rsync busybox e2fsprogs ptpd i2c-tools linux/am335x-evm ntp'
+cfg_packages='u-boot dropbear rsync busybox e2fsprogs ptpd i2c-tools am33xx-cm3/host linux libav'

systems/lctr-b2xx/x8-04.cfg

@@ -0,0 +1,6 @@
+cfg_hostname='x8-04'
+cfg_storage='data0:ext4:/opt'
+cfg_eth_ext_ip='10.0.20.115'
+cfg_eth_ext_mk='255.255.0.0'
+cfg_eth_ext_gw='10.0.0.1'
+cfg_packages='u-boot dropbear rsync busybox e2fsprogs ptpd i2c-tools am33xx-cm3/host linux libav'

utils/glued-download-sources.bash

@@ -47,7 +47,10 @@ find "$PKGS" -name '*.bash' | while read file; do
         if [ "$fh" != "$m" ]; then
             nfo1 "Downloading $f"
             echo ""
-            wget -P "$DST" -4 -c "$u"
+            wget \
+                --timeout=30 \
+                --tries 1 \
+                -P "$DST" -4 -c "$u"
             echo ""
         fi
         let n++