mirror of
https://codeberg.org/portospaceteam/E-42.git
synced 2024-11-25 22:56:27 +00:00
154 lines
6.8 KiB
Markdown
154 lines
6.8 KiB
Markdown
SOFTWARE ENGINEERING DEPARTMENT
|
|
|
|
SITUATION REPORT 3
|
|
|
|
Implementing a Parachute Launching System using Pixhawk
|
|
|
|
Luís Jesus
|
|
|
|
October, 2022
|
|
|
|
Summary
|
|
=======
|
|
|
|
With this report, I want to introduce a way to implement our Parachute
|
|
Recovery System that will guarantee that the rocket lands on the ground
|
|
successfully. This implementation was suggested by Professor Anuj Regmi
|
|
(SYSTEC). Even though there are not rocketry implementations of its
|
|
suggestion (besides BPS.space) in which we can rely on, it is relevant
|
|
to search how it could be done and some of its constraints.
|
|
|
|
As concluded in the previous meeting, designing our own board computer
|
|
"from scratch\" is actually very risky and may lead to difficult
|
|
challenges that we may not be able to solve "in-time\", which means that
|
|
we must choose a more reliable path, at least for now. The suggestion
|
|
was to use a Pixhawk Autopilot Board - Pixhawk \[[full specifications'
|
|
sheet
|
|
here](https://docs.px4.io/main/en/flight_controller/pixhawk4.html)\] -
|
|
and ArduPilot as the controller/receiver of this board (it is tipically
|
|
the software used along with Pixhawk).
|
|
|
|
If we move on to this solution, that means that a great part of the plan
|
|
made by the Electrical Engineering Department will have to be discarded,
|
|
as Pixhawk4 has in-built sensors and they won't have to face the
|
|
expected assembly and testing procedure that was initially designed.
|
|
|
|
Introduction
|
|
============
|
|
|
|
Ardupilot is a open source autopilot system that supports many vehicle
|
|
types, such as multi-copters, traditional helicopters, fixed wing
|
|
aircraft, etc. However, there is not much information about its
|
|
implementation in rockets, and the only example we have is
|
|
[BPS.SPACE](https://bps.space/), from which we don't have many
|
|
information.
|
|
|
|
Considering this, we know that this implementation would need some
|
|
adjustments to fit in the rocketry field.
|
|
|
|
Mission Planner is part of ArduPilot and it has the interface that
|
|
allows us to follow the vehicle during its flight. However, if we look
|
|
to the picture bellow, we can also see that there is not compatibility
|
|
with a rocket-type vehicle. A amateur SpaceX inspired rocket ([see
|
|
here](https://hackaday.io/project/174329-spacex-inspired-edf-rocket))
|
|
actually implemented Pixhawk running with ArduPilot V4.0.4 configured as
|
|
a single-copter, however, the mentioned project is very different. It's
|
|
not a real rocket; it \"flies\" like a drone, it does not reach high
|
|
altitude, it is remote controlled, etc. The analysis about the
|
|
requirements to make a Pixhawk based board fit a rocket model is in
|
|
charge of our team member João Gil, though.
|
|
|
|
Considering this, there is not information about parachute deployment
|
|
using Pixhawk + Ardupilot on rocketry, but we can see a more \"typical\"
|
|
case (for example, how it is used in drones).
|
|
|
|
|
|
|
|
Parachute Deployment System
|
|
===========================
|
|
|
|
As a baseline requirement to implement this, we have, of course, a
|
|
complete parachute mechanism like [SkyCat](https://www.skycat.pro/shop/)
|
|
or [CAD Drones](http://store.caddrones.com/products) but adapted, in
|
|
this case, to fit our own vehicle that is way larger than the vehicles
|
|
Ardupilot is meant for. This study is certainly under the analysis of
|
|
another department, as it is not related to software.
|
|
|
|
The release of the parachute is actually a mechanical \"phenomenon\" and
|
|
that made the interpretation of the documentation a little bit hard.
|
|
Maybe we need the help of a member of the Electrical and Mechanical
|
|
Departments to help us understanding what is actually happening during
|
|
the deployment of the parachute.
|
|
|
|
The parachute release mechanism can be triggered from either a Relay or
|
|
a PWM (Pulse-width modulation) signal. If a Relay pin is used, the
|
|
parachute release has to be activated on a high level and RELAY\_DEFAULT
|
|
has to be OFF or No Change, in order to avoid triggering the release
|
|
during initialization. For more information about this and other
|
|
parameters, see [Complete Parameter
|
|
List](https://ardupilot.org/plane/docs/parameters.html#relay-default)
|
|
(we need the help of other departments to better understand them).
|
|
|
|
We may want the parachute to deploy automatically or manually, but in
|
|
our case, it's just going to be automatic because the Ground Station is
|
|
not sending any kind of signals/data/information to the rocket, it will
|
|
only work as a receiver.
|
|
|
|
In the [official documentation of
|
|
ArduPilot](https://ardupilot.org/copter/docs/common-parachute.html), it
|
|
is referred that the configuration is made via Mission Planner and we
|
|
have a bunch of parameters to deal with according to our needs and
|
|
specificities. There is some information about the PINs configuration,
|
|
however, I did not understand how our rocket is in terms of mechanical
|
|
components in order to make a detailed report about the implementation
|
|
of this functionality. Considering this noticeable trouble on
|
|
understanding other technical information in the documentation, we may
|
|
need to establish a very close relationship with other departments
|
|
because there are many subjects crossing our theoretical implementation.
|
|
This terms and configurations are important to discuss with other
|
|
departments:
|
|
|
|
|
|
|
|
Apart from this, there is a project called
|
|
[ArduRocket](https://diydrones.com/forum/topics/ardurocket?xg_source=activity)
|
|
that seems to be a modified version of ArduPilot but it is quite old
|
|
(check [GitHub repository](https://github.com/stew-lilley/ArduRocket)).
|
|
|
|
Veredict
|
|
========
|
|
|
|
There is basically no information about Pixhawk + Ardupilot usage in
|
|
rocketry, but only about their typical implementations in other
|
|
vehicles. This means that there is a need to study the best way to make
|
|
this type of implementation compatible.
|
|
|
|
For this, it seems that the help and monitoring of other departments
|
|
(Electrical and/or Mechanical ?) is crucial to understand the viability
|
|
of the implementation. Invictus is being designed to reach an apogee of
|
|
3000 meters and it uses hybrid-propulsion; it seems quite complex when
|
|
compared to those simple vehicles supported by ArduPilot which means
|
|
that there is a big analysis of viability to be made by a competent
|
|
department before any kind of analysis of implementation.
|
|
|
|
Apart from this, if the transposition of this technology to our rocket
|
|
is achievable and viable, there is the official documentation mentioned
|
|
in this report about the setup of the parachute deployment system, that
|
|
has to be analyzed carefully not only by our department, but
|
|
fundamentally with the help of the Mechanical Engineering Department and
|
|
Electrical Engineering Department.
|
|
|
|
References
|
|
==========
|
|
|
|
\[1\] [ArduPilot](https://ardupilot.org/);
|
|
|
|
\[2\] [ArduRocket (DIY DRONES
|
|
Forum](https://diydrones.com/forum/topics/ardurocket?xg_source=activity);
|
|
|
|
\[3\] [ArduRocket GitHub
|
|
repository](https://github.com/stew-lilley/ArduRocket);
|
|
|
|
\[4\]
|
|
[Hackaday](https://hackaday.io/project/174329-spacex-inspired-edf-rocket).
|