rules/linux-headers/cross: Fixed url.

GCC v5.4 is not needed to compile the new kernel.
This reverts commit 8faf53ef3e.

.gitignore

@@ -9,3 +9,5 @@
 /lauv-aux
 /lauv-aux-rpi
 /ntnu-b2xx
+/stamp9g20
+/lctr-rpi

architectures/arm926ej-s.cfg

@@ -0,0 +1,4 @@
+cfg_target_canonical="armv5te-$cfg_glued_vendor-linux-gnueabi"
+cfg_target_linux='arm'
+cfg_target_gcc_flags='-O2 -pipe -funit-at-a-time -mtune=arm926ej-s -mfloat-abi=soft'
+cfg_target_gcc_configure_flags='--with-arch=armv5te --with-tune=arm926ej-s --with-float=soft'

docker/Dockerfile

@@ -0,0 +1,37 @@
+###########################################################################
+# GLUED: GNU/Linux Uniform Environment Distribution                       #
+# Copyright (C) 2016 OceanScan - Marine Systems & Technology, Lda.        #
+###########################################################################
+# This program is free software; you can redistribute it and/or modify    #
+# it under the terms of the GNU General Public License as published by    #
+# the Free Software Foundation; either version 2 of the License, or (at   #
+# your option) any later version.                                         #
+#                                                                         #
+# This program is distributed in the hope that it will be useful, but     #
+# WITHOUT ANY WARRANTY; without even the implied warranty of              #
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU       #
+# General Public License for more details.                                #
+#                                                                         #
+# You should have received a copy of the GNU General Public License       #
+# along with this program; if not, write to the Free Software             #
+# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA           #
+# 02110-1301 USA.                                                         #
+###########################################################################
+# Author: Ricardo Martins                                                 #
+###########################################################################
+
+FROM debian:8
+
+MAINTAINER Ricardo Martins <rasm@oceanscan-mst.com>
+
+ENV DEBIAN_FRONTEND noninteractive
+
+# Update distro.
+RUN apt-get update -y
+RUN apt-get dist-upgrade -y
+RUN apt-get install -y wget
+RUN apt-get install -y bzip2
+RUN apt-get install -y git
+RUN apt-get install -y g++-multilib
+RUN apt-get install -y cmake
+RUN apt-get install -y file

docker/Makefile

@@ -0,0 +1,31 @@
+###########################################################################
+# GLUED: GNU/Linux Uniform Environment Distribution                       #
+# Copyright (C) 2016 OceanScan - Marine Systems & Technology, Lda.        #
+###########################################################################
+# This program is free software; you can redistribute it and/or modify    #
+# it under the terms of the GNU General Public License as published by    #
+# the Free Software Foundation; either version 2 of the License, or (at   #
+# your option) any later version.                                         #
+#                                                                         #
+# This program is distributed in the hope that it will be useful, but     #
+# WITHOUT ANY WARRANTY; without even the implied warranty of              #
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU       #
+# General Public License for more details.                                #
+#                                                                         #
+# You should have received a copy of the GNU General Public License       #
+# along with this program; if not, write to the Free Software             #
+# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA           #
+# 02110-1301 USA.                                                         #
+###########################################################################
+# Author: Ricardo Martins                                                 #
+###########################################################################
+
+TAG     := glued
+VERSION := 2016.05.0
+VOLUME  := $(CURDIR)/..
+
+all:
+	docker build -t $(TAG):$(VERSION) .
+
+shell:
+	docker run -w $(VOLUME) -i -a stdin -a stdout -v $(VOLUME):$(VOLUME) -t $(TAG):$(VERSION)

functions.bash

@@ -1,6 +1,6 @@
 ###########################################################################
 # GLUED: GNU/Linux Uniform Environment Distribution                       #
-# Copyright (C) 2007-2014 Universidade do Porto - Faculdade de Engenharia #
+# Copyright (C) 2007-2017 Universidade do Porto - Faculdade de Engenharia #
 # Laboratório de Sistemas e Tecnologia Subaquática (LSTS)                 #
 ###########################################################################
 # This program is free software; you can redistribute it and/or modify    #
@@ -40,3 +40,15 @@ err()
 {
     echo -e "[$(date +"%Y-%m-%d %H:%M:%S")] \033[0m\033[1;31mERROR: $*\033[0m"
 }
+
+ucat()
+{
+    case "$1" in
+        *.gz)
+            zcat "$1"
+            ;;
+        *)
+            cat "$1"
+            ;;
+    esac
+}

mkconfig.bash

@@ -1,7 +1,7 @@
 #! /bin/bash
 ###########################################################################
 # GLUED: GNU/Linux Uniform Environment Distribution                       #
-# Copyright (C) 2007-2014 Universidade do Porto - Faculdade de Engenharia #
+# Copyright (C) 2007-2017 Universidade do Porto - Faculdade de Engenharia #
 # Laboratório de Sistemas e Tecnologia Subaquática (LSTS)                 #
 ###########################################################################
 # This program is free software; you can redistribute it and/or modify    #
@@ -23,7 +23,7 @@
 ###########################################################################
 
 # Config: GLUED version.
-cfg_glued_version='2016.03'
+cfg_glued_version='2016.05'
 # Config: GLUED vendor.
 cfg_glued_vendor='lsts'
 

mkdisk.bash

@@ -1,7 +1,7 @@
 #! /bin/bash
 ###########################################################################
 # GLUED: GNU/Linux Uniform Environment Distribution                       #
-# Copyright (C) 2007-2014 Universidade do Porto - Faculdade de Engenharia #
+# Copyright (C) 2007-2017 Universidade do Porto - Faculdade de Engenharia #
 # Laboratório de Sistemas e Tecnologia Subaquática (LSTS)                 #
 ###########################################################################
 # This program is free software; you can redistribute it and/or modify    #
@@ -103,15 +103,17 @@ create_part_rpiboot()
 
     for f in "$cfg_sys_family/rootfs/boot/"*; do
         nfo2 installing $f to boot partition
-        cp "$f" mount || die
+        cp -r "$f" mount || die
     done
 
     nfo2 renaming kernel to kernel7.img
     mv mount/kernel mount/kernel7.img
 
-    dtb=$(basename "$cfg_target_linux_dtb")
-    nfo2 renaming board.dtb to "$dtb"
-    mv "mount/board.dtb" "mount/$dtb"
+    if [ -f mount/board.dtb ]; then
+        dtb=$(basename "$cfg_target_linux_dtb")
+        nfo2 renaming board.dtb to "$dtb"
+        mv "mount/board.dtb" "mount/$dtb"
+    fi
 
     cmd_parted "$dev_loop" \
         set "$part_nr" lba on \

mkpackage.bash

@@ -1,7 +1,7 @@
 #! /bin/bash
 ###########################################################################
 # GLUED: GNU/Linux Uniform Environment Distribution                       #
-# Copyright (C) 2007-2014 Universidade do Porto - Faculdade de Engenharia #
+# Copyright (C) 2007-2017 Universidade do Porto - Faculdade de Engenharia #
 # Laboratório de Sistemas e Tecnologia Subaquática (LSTS)                 #
 ###########################################################################
 # This program is free software; you can redistribute it and/or modify    #
@@ -71,17 +71,22 @@ download()
             fi
         fi
 
-        # First try OceanScan-MST mirror.
-        omst_url="http://www.omst.pt/glued/$(basename $u)"
-        download_tool "$omst_url" "$cfg_dir_downloads/$file"
+	# First try LSTS mirror.
+	lsts_url="http://lsts.pt/glued/$(basename $u)"
+        download_tool "$lsts_url" "$cfg_dir_downloads/$file"
         if [ $? -ne 0 ]; then
-            # On failure try upstream URL.
-            download_tool "$u" "$cfg_dir_downloads/$file"
+	    # Then try OceanScan-MST mirror.
+            omst_url="http://www.omst.pt/glued/$(basename $u)"
+            download_tool "$omst_url" "$cfg_dir_downloads/$file"
             if [ $? -ne 0 ]; then
-                echo "ERROR: download failed"
-                exit 1
+		# On failure try upstream URL.
+		download_tool "$u" "$cfg_dir_downloads/$file"
+		if [ $? -ne 0 ]; then
+                    echo "ERROR: download failed"
+                    exit 1
+		fi
             fi
-        fi
+	fi
 
         md5="$(md5sum_tool "$cfg_dir_downloads/$file")"
         if [ "$s" != "$md5" ]; then

mksystem.bash

@@ -1,7 +1,7 @@
 #! /bin/bash
 ###########################################################################
 # GLUED: GNU/Linux Uniform Environment Distribution                       #
-# Copyright (C) 2007-2013 Universidade do Porto - Faculdade de Engenharia #
+# Copyright (C) 2007-2017 Universidade do Porto - Faculdade de Engenharia #
 # Laboratório de Sistemas e Tecnologia Subaquática (LSTS)                 #
 ###########################################################################
 # This program is free software; you can redistribute it and/or modify    #

mkupdate.bash

@@ -0,0 +1,68 @@
+#! /bin/bash
+###########################################################################
+# GLUED: GNU/Linux Uniform Environment Distribution                       #
+# Copyright (C) 2007-2017 Universidade do Porto - Faculdade de Engenharia #
+# Laboratório de Sistemas e Tecnologia Subaquática (LSTS)                 #
+###########################################################################
+# This program is free software; you can redistribute it and/or modify    #
+# it under the terms of the GNU General Public License as published by    #
+# the Free Software Foundation; either version 2 of the License, or (at   #
+# your option) any later version.                                         #
+#                                                                         #
+# This program is distributed in the hope that it will be useful, but     #
+# WITHOUT ANY WARRANTY; without even the implied warranty of              #
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU       #
+# General Public License for more details.                                #
+#                                                                         #
+# You should have received a copy of the GNU General Public License       #
+# along with this program; if not, write to the Free Software             #
+# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA           #
+# 02110-1301 USA.                                                         #
+###########################################################################
+# Author: Tiago Marques                                                   #
+###########################################################################
+
+update_tool()
+{
+    rsync -v "$1" root@"$2":/opt/"$cfg_glued_vendor"/glued/
+    if [ $? -eq 0 ]; then
+        return 0
+    fi
+
+    scp "$1" root@"$2":/opt/"$cfg_glued_vendor"/glued/
+    if [ $? -eq 0 ]; then
+        return 0
+    fi
+
+    return 1
+}
+
+# Check command line arguments.
+if [ $# -lt 1 ]; then
+    echo "Usage: $0 <config>"
+    exit 1
+fi
+
+# Read system configuration file.
+if ! [ -f "$1" ]; then
+    echo -e "\e[1;31mERROR: invalid configuration file '$1'\e[0m"
+    exit 1
+fi
+
+# Read system configuration file.
+source "$1"
+
+if [ ! -f "$cfg_rootfs_tar" ];
+then
+    echo -e "\e[1;31mERROR: You should run ./pkrootfs $1\e[0m"
+    exit 1
+fi
+
+# check for dirty repo
+if [[ "$cfg_glued_git_version" =~ .*-dirty$ ]]
+then
+    echo -e "\e[1;31mThis glued's version is dirty\e[0m"
+fi
+
+# send package to the system
+update_tool "$cfg_rootfs_tar" "$cfg_eth_ext_ip"

pkrootfs.bash

@@ -1,7 +1,7 @@
 #! /bin/bash
 ###########################################################################
 # GLUED: GNU/Linux Uniform Environment Distribution                       #
-# Copyright (C) 2007-2014 Universidade do Porto - Faculdade de Engenharia #
+# Copyright (C) 2007-2017 Universidade do Porto - Faculdade de Engenharia #
 # Laboratório de Sistemas e Tecnologia Subaquática (LSTS)                 #
 ###########################################################################
 # This program is free software; you can redistribute it and/or modify    #
@@ -60,7 +60,7 @@ done
 
 # Copy DTB.
 if [ -n "$cfg_target_linux_dtb" ]; then
-    cp -v "$cfg_dir_toolchain/boot/$(basename $cfg_target_linux_dtb)" "$cfg_dir_rootfs/boot/board.dtb"
+    cp -v "$cfg_dir_rootfs/boot/$(basename $cfg_target_linux_dtb)" "$cfg_dir_rootfs/boot/board.dtb"
 fi
 
 # Write config vars.

pktoolchain.bash

@@ -1,7 +1,7 @@
 #! /bin/bash
 ###########################################################################
 # GLUED: GNU/Linux Uniform Environment Distribution                       #
-# Copyright (C) 2007-2014 Universidade do Porto - Faculdade de Engenharia #
+# Copyright (C) 2007-2017 Universidade do Porto - Faculdade de Engenharia #
 # Laboratório de Sistemas e Tecnologia Subaquática (LSTS)                 #
 ###########################################################################
 # This program is free software; you can redistribute it and/or modify    #

rules/base/host.bash

@@ -26,4 +26,5 @@ requires=\
     'parted/host'
     'dosfstools/host'
     'e2fsprogs/host'
+    'cmake/host'
 )

rules/bridge-utils/default.bash

@@ -1,16 +1,16 @@
 version=\
 (
-    '1.5'
+    '1.6'
 )
 
 url=\
 (
-    "http://downloads.sourceforge.net/project/bridge/bridge/bridge-utils-$version.tar.gz"
+    "http://www.kernel.org/pub/linux/utils/net/bridge-utils/bridge-utils-$version.tar.gz"
 )
 
 md5=\
 (
-    'ec7b381160b340648dede58c31bb2238'
+    'f369e90e85e4bb46baa26a7b9d66b578'
 )
 
 maintainer=\

rules/busybox/config

@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Busybox version: 1.22.1
-# Sun Feb  8 18:17:19 2015
+# Busybox version: 1.24.1
+# Tue Apr  5 18:00:54 2016
 #
 CONFIG_HAVE_DOT_CONFIG=y
 
@@ -36,6 +36,8 @@ CONFIG_LAST_SUPPORTED_WCHAR=767
 # CONFIG_UNICODE_BIDI_SUPPORT is not set
 # CONFIG_UNICODE_NEUTRAL_TABLE is not set
 # CONFIG_UNICODE_PRESERVE_BROKEN is not set
+# CONFIG_PAM is not set
+CONFIG_FEATURE_USE_SENDFILE=y
 CONFIG_LONG_OPTS=y
 CONFIG_FEATURE_DEVPTS=y
 # CONFIG_FEATURE_CLEAN_UP is not set
@@ -73,6 +75,7 @@ CONFIG_EXTRA_LDLIBS=""
 #
 # CONFIG_DEBUG is not set
 # CONFIG_DEBUG_PESSIMIZE is not set
+# CONFIG_UNIT_TEST is not set
 # CONFIG_WERROR is not set
 CONFIG_NO_DEBUG_LIB=y
 # CONFIG_DMALLOC is not set
@@ -153,10 +156,11 @@ CONFIG_XZ=y
 # CONFIG_GZIP is not set
 # CONFIG_FEATURE_GZIP_LONG_OPTIONS is not set
 CONFIG_GZIP_FAST=0
+# CONFIG_FEATURE_GZIP_LEVELS is not set
 # CONFIG_LZOP is not set
 # CONFIG_LZOP_COMPR_HIGH is not set
-# CONFIG_RPM is not set
 # CONFIG_RPM2CPIO is not set
+# CONFIG_RPM is not set
 CONFIG_TAR=y
 # CONFIG_FEATURE_TAR_CREATE is not set
 CONFIG_FEATURE_TAR_AUTODETECT=y
@@ -180,9 +184,17 @@ CONFIG_DATE=y
 CONFIG_FEATURE_DATE_ISOFMT=y
 # CONFIG_FEATURE_DATE_NANO is not set
 CONFIG_FEATURE_DATE_COMPAT=y
+CONFIG_DD=y
+CONFIG_FEATURE_DD_SIGNAL_HANDLING=y
+# CONFIG_FEATURE_DD_THIRD_STATUS_LINE is not set
+# CONFIG_FEATURE_DD_IBS_OBS is not set
+CONFIG_FEATURE_DD_STATUS=y
 # CONFIG_HOSTID is not set
 CONFIG_ID=y
 CONFIG_GROUPS=y
+CONFIG_SHUF=y
+CONFIG_SYNC=y
+CONFIG_FEATURE_SYNC_FANCY=y
 CONFIG_TEST=y
 # CONFIG_FEATURE_TEST_64 is not set
 CONFIG_TOUCH=y
@@ -191,6 +203,8 @@ CONFIG_FEATURE_TOUCH_SUSV3=y
 CONFIG_TR=y
 CONFIG_FEATURE_TR_CLASSES=y
 CONFIG_FEATURE_TR_EQUIV=y
+CONFIG_TRUNCATE=y
+CONFIG_UNLINK=y
 CONFIG_BASE64=y
 # CONFIG_WHO is not set
 # CONFIG_USERS is not set
@@ -206,10 +220,6 @@ CONFIG_CHROOT=y
 CONFIG_CP=y
 # CONFIG_FEATURE_CP_LONG_OPTIONS is not set
 CONFIG_CUT=y
-CONFIG_DD=y
-CONFIG_FEATURE_DD_SIGNAL_HANDLING=y
-# CONFIG_FEATURE_DD_THIRD_STATUS_LINE is not set
-# CONFIG_FEATURE_DD_IBS_OBS is not set
 CONFIG_DF=y
 # CONFIG_FEATURE_DF_FANCY is not set
 CONFIG_DIRNAME=y
@@ -278,7 +288,6 @@ CONFIG_STAT=y
 CONFIG_FEATURE_STAT_FORMAT=y
 CONFIG_STTY=y
 # CONFIG_SUM is not set
-CONFIG_SYNC=y
 # CONFIG_TAC is not set
 CONFIG_TAIL=y
 # CONFIG_FEATURE_FANCY_TAIL is not set
@@ -287,6 +296,7 @@ CONFIG_TEE=y
 CONFIG_TRUE=y
 CONFIG_TTY=y
 CONFIG_UNAME=y
+CONFIG_UNAME_OSNAME="GNU/Linux"
 # CONFIG_UNEXPAND is not set
 # CONFIG_FEATURE_UNEXPAND_LONG_OPTIONS is not set
 CONFIG_UNIQ=y
@@ -298,6 +308,11 @@ CONFIG_WC=y
 CONFIG_WHOAMI=y
 CONFIG_YES=y
 
+#
+# Common options
+#
+CONFIG_FEATURE_VERBOSE=y
+
 #
 # Common options for cp and mv
 #
@@ -384,6 +399,9 @@ CONFIG_FEATURE_VI_USE_SIGNALS=y
 # CONFIG_FEATURE_VI_SET is not set
 CONFIG_FEATURE_VI_WIN_RESIZE=y
 CONFIG_FEATURE_VI_ASK_TERMINAL=y
+CONFIG_FEATURE_VI_UNDO=y
+CONFIG_FEATURE_VI_UNDO_QUEUE=y
+CONFIG_FEATURE_VI_UNDO_QUEUE_MAX=256
 CONFIG_FEATURE_ALLOW_EXEC=y
 
 #
@@ -400,6 +418,7 @@ CONFIG_FEATURE_FIND_MAXDEPTH=y
 # CONFIG_FEATURE_FIND_NEWER is not set
 # CONFIG_FEATURE_FIND_INUM is not set
 CONFIG_FEATURE_FIND_EXEC=y
+CONFIG_FEATURE_FIND_EXEC_PLUS=y
 CONFIG_FEATURE_FIND_USER=y
 CONFIG_FEATURE_FIND_GROUP=y
 CONFIG_FEATURE_FIND_NOT=y
@@ -421,6 +440,7 @@ CONFIG_XARGS=y
 CONFIG_FEATURE_XARGS_SUPPORT_QUOTES=y
 # CONFIG_FEATURE_XARGS_SUPPORT_TERMOPT is not set
 CONFIG_FEATURE_XARGS_SUPPORT_ZERO_TERM=y
+CONFIG_FEATURE_XARGS_SUPPORT_REPL_STR=y
 
 #
 # Init Utilities
@@ -457,6 +477,7 @@ CONFIG_USE_BB_CRYPT=y
 CONFIG_ADDUSER=y
 # CONFIG_FEATURE_ADDUSER_LONG_OPTIONS is not set
 # CONFIG_FEATURE_CHECK_NAMES is not set
+CONFIG_LAST_ID=60000
 CONFIG_FIRST_SYSTEM_ID=100
 CONFIG_LAST_SYSTEM_ID=999
 CONFIG_ADDGROUP=y
@@ -468,7 +489,6 @@ CONFIG_DELGROUP=y
 CONFIG_GETTY=y
 CONFIG_LOGIN=y
 # CONFIG_LOGIN_SESSION_AS_CHILD is not set
-# CONFIG_PAM is not set
 # CONFIG_LOGIN_SCRIPTS is not set
 CONFIG_FEATURE_NOLOGIN=y
 # CONFIG_FEATURE_SECURETTY is not set
@@ -526,6 +546,7 @@ CONFIG_DEFAULT_DEPMOD_FILE="modules.dep"
 # Linux System Utilities
 #
 CONFIG_BLOCKDEV=y
+CONFIG_FATATTR=y
 CONFIG_FSTRIM=y
 CONFIG_MDEV=y
 CONFIG_FEATURE_MDEV_CONF=y
@@ -533,7 +554,18 @@ CONFIG_FEATURE_MDEV_RENAME=y
 CONFIG_FEATURE_MDEV_RENAME_REGEXP=y
 CONFIG_FEATURE_MDEV_EXEC=y
 CONFIG_FEATURE_MDEV_LOAD_FIRMWARE=y
+CONFIG_MOUNT=y
+# CONFIG_FEATURE_MOUNT_FAKE is not set
+# CONFIG_FEATURE_MOUNT_VERBOSE is not set
+# CONFIG_FEATURE_MOUNT_HELPERS is not set
+CONFIG_FEATURE_MOUNT_LABEL=y
+# CONFIG_FEATURE_MOUNT_NFS is not set
+# CONFIG_FEATURE_MOUNT_CIFS is not set
+CONFIG_FEATURE_MOUNT_FLAGS=y
+CONFIG_FEATURE_MOUNT_FSTAB=y
+CONFIG_FEATURE_MOUNT_OTHERTAB=y
 CONFIG_REV=y
+CONFIG_UEVENT=y
 # CONFIG_ACPID is not set
 # CONFIG_FEATURE_ACPID_COMPAT is not set
 CONFIG_BLKID=y
@@ -579,15 +611,6 @@ CONFIG_FEATURE_HWCLOCK_ADJTIME_FHS=y
 # CONFIG_MKSWAP is not set
 # CONFIG_FEATURE_MKSWAP_UUID is not set
 CONFIG_MORE=y
-CONFIG_MOUNT=y
-# CONFIG_FEATURE_MOUNT_FAKE is not set
-# CONFIG_FEATURE_MOUNT_VERBOSE is not set
-# CONFIG_FEATURE_MOUNT_HELPERS is not set
-CONFIG_FEATURE_MOUNT_LABEL=y
-# CONFIG_FEATURE_MOUNT_NFS is not set
-# CONFIG_FEATURE_MOUNT_CIFS is not set
-CONFIG_FEATURE_MOUNT_FLAGS=y
-CONFIG_FEATURE_MOUNT_FSTAB=y
 CONFIG_PIVOT_ROOT=y
 # CONFIG_RDATE is not set
 # CONFIG_RDEV is not set
@@ -597,6 +620,7 @@ CONFIG_PIVOT_ROOT=y
 # CONFIG_SCRIPTREPLAY is not set
 # CONFIG_SETARCH is not set
 # CONFIG_SWAPONOFF is not set
+# CONFIG_FEATURE_SWAPON_DISCARD is not set
 # CONFIG_FEATURE_SWAPON_PRI is not set
 CONFIG_SWITCH_ROOT=y
 CONFIG_UMOUNT=y
@@ -639,10 +663,19 @@ CONFIG_FEATURE_VOLUMEID_SQUASHFS=y
 # Miscellaneous Utilities
 #
 # CONFIG_CONSPY is not set
+# CONFIG_CROND is not set
+# CONFIG_FEATURE_CROND_D is not set
+# CONFIG_FEATURE_CROND_CALL_SENDMAIL is not set
+CONFIG_FEATURE_CROND_DIR=""
+CONFIG_I2CGET=y
+CONFIG_I2CSET=y
+CONFIG_I2CDUMP=y
+CONFIG_I2CDETECT=y
 CONFIG_LESS=y
 CONFIG_FEATURE_LESS_MAXLINES=9999999
 CONFIG_FEATURE_LESS_BRACKETS=y
 CONFIG_FEATURE_LESS_FLAGS=y
+CONFIG_FEATURE_LESS_TRUNCATE=y
 # CONFIG_FEATURE_LESS_MARKS is not set
 # CONFIG_FEATURE_LESS_REGEXP is not set
 # CONFIG_FEATURE_LESS_WINCH is not set
@@ -653,6 +686,8 @@ CONFIG_FEATURE_LESS_FLAGS=y
 # CONFIG_NANDDUMP is not set
 # CONFIG_RFKILL is not set
 CONFIG_SETSERIAL=y
+# CONFIG_TASKSET is not set
+# CONFIG_FEATURE_TASKSET_FANCY is not set
 # CONFIG_UBIATTACH is not set
 # CONFIG_UBIDETACH is not set
 CONFIG_UBIMKVOL=y
@@ -675,10 +710,6 @@ CONFIG_FEATURE_BEEP_LENGTH_MS=0
 # CONFIG_FEATURE_CHAT_VAR_ABORT_LEN is not set
 # CONFIG_FEATURE_CHAT_CLR_ABORT is not set
 # CONFIG_CHRT is not set
-# CONFIG_CROND is not set
-# CONFIG_FEATURE_CROND_D is not set
-# CONFIG_FEATURE_CROND_CALL_SENDMAIL is not set
-CONFIG_FEATURE_CROND_DIR=""
 # CONFIG_CRONTAB is not set
 # CONFIG_DC is not set
 # CONFIG_FEATURE_DC_LIBM is not set
@@ -694,7 +725,7 @@ CONFIG_FEATURE_CROND_DIR=""
 CONFIG_FLASHCP=y
 CONFIG_FLASH_LOCK=y
 CONFIG_FLASH_UNLOCK=y
-# CONFIG_FLASH_ERASEALL is not set
+CONFIG_FLASH_ERASEALL=y
 # CONFIG_IONICE is not set
 # CONFIG_INOTIFYD is not set
 # CONFIG_LAST is not set
@@ -720,8 +751,6 @@ CONFIG_MOUNTPOINT=y
 # CONFIG_RX is not set
 # CONFIG_SETSID is not set
 # CONFIG_STRINGS is not set
-# CONFIG_TASKSET is not set
-# CONFIG_FEATURE_TASKSET_FANCY is not set
 CONFIG_TIME=y
 # CONFIG_TIMEOUT is not set
 # CONFIG_TTYSIZE is not set
@@ -741,6 +770,13 @@ CONFIG_NC_EXTRA=y
 CONFIG_PING=y
 # CONFIG_PING6 is not set
 CONFIG_FEATURE_FANCY_PING=y
+CONFIG_WGET=y
+# CONFIG_FEATURE_WGET_STATUSBAR is not set
+CONFIG_FEATURE_WGET_AUTHENTICATION=y
+# CONFIG_FEATURE_WGET_LONG_OPTIONS is not set
+CONFIG_FEATURE_WGET_TIMEOUT=y
+CONFIG_FEATURE_WGET_OPENSSL=y
+CONFIG_FEATURE_WGET_SSL_HELPER=y
 CONFIG_WHOIS=y
 # CONFIG_FEATURE_IPV6 is not set
 # CONFIG_FEATURE_UNIX_LOCAL is not set
@@ -757,13 +793,13 @@ CONFIG_ETHER_WAKE=y
 CONFIG_FTPD=y
 CONFIG_FEATURE_FTP_WRITE=y
 CONFIG_FEATURE_FTPD_ACCEPT_BROKEN_LIST=y
+CONFIG_FEATURE_FTP_AUTHENTICATION=y
 # CONFIG_FTPGET is not set
 # CONFIG_FTPPUT is not set
 # CONFIG_FEATURE_FTPGETPUT_LONG_OPTIONS is not set
 CONFIG_HOSTNAME=y
 # CONFIG_HTTPD is not set
 # CONFIG_FEATURE_HTTPD_RANGES is not set
-# CONFIG_FEATURE_HTTPD_USE_SENDFILE is not set
 # CONFIG_FEATURE_HTTPD_SETUID is not set
 # CONFIG_FEATURE_HTTPD_BASIC_AUTH is not set
 # CONFIG_FEATURE_HTTPD_AUTH_MD5 is not set
@@ -802,6 +838,7 @@ CONFIG_IP=y
 CONFIG_FEATURE_IP_ADDRESS=y
 CONFIG_FEATURE_IP_LINK=y
 CONFIG_FEATURE_IP_ROUTE=y
+CONFIG_FEATURE_IP_ROUTE_DIR="/etc/iproute2"
 # CONFIG_FEATURE_IP_TUNNEL is not set
 # CONFIG_FEATURE_IP_RULE is not set
 # CONFIG_FEATURE_IP_SHORT_FORMS is not set
@@ -820,6 +857,7 @@ CONFIG_FEATURE_IP_ROUTE=y
 # CONFIG_NSLOOKUP is not set
 # CONFIG_NTPD is not set
 # CONFIG_FEATURE_NTPD_SERVER is not set
+# CONFIG_FEATURE_NTPD_CONF is not set
 # CONFIG_PSCAN is not set
 CONFIG_ROUTE=y
 # CONFIG_SLATTACH is not set
@@ -853,6 +891,7 @@ CONFIG_FEATURE_TELNET_AUTOLOGIN=y
 CONFIG_DHCPD_LEASES_FILE=""
 CONFIG_UDHCPC=y
 # CONFIG_FEATURE_UDHCPC_ARPING is not set
+CONFIG_FEATURE_UDHCPC_SANITIZEOPT=y
 # CONFIG_FEATURE_UDHCP_PORT is not set
 CONFIG_UDHCP_DEBUG=9
 CONFIG_FEATURE_UDHCP_RFC3397=y
@@ -862,11 +901,6 @@ CONFIG_UDHCPC_SLACK_FOR_BUGGY_SERVERS=80
 CONFIG_IFUPDOWN_UDHCPC_CMD_OPTIONS=""
 # CONFIG_UDPSVD is not set
 # CONFIG_VCONFIG is not set
-CONFIG_WGET=y
-# CONFIG_FEATURE_WGET_STATUSBAR is not set
-CONFIG_FEATURE_WGET_AUTHENTICATION=y
-# CONFIG_FEATURE_WGET_LONG_OPTIONS is not set
-CONFIG_FEATURE_WGET_TIMEOUT=y
 # CONFIG_ZCIP is not set
 
 #
@@ -971,6 +1005,7 @@ CONFIG_ASH_GETOPTS=y
 # CONFIG_ASH_BUILTIN_ECHO is not set
 CONFIG_ASH_BUILTIN_PRINTF=y
 CONFIG_ASH_BUILTIN_TEST=y
+CONFIG_ASH_HELP=y
 # CONFIG_ASH_CMDCMD is not set
 # CONFIG_ASH_MAIL is not set
 CONFIG_ASH_OPTIMIZE_FOR_SIZE=y

rules/dune/default.bash

@@ -1,6 +1,6 @@
 version=\
 (
-    'mission/necsave'
+    'master'
 )
 
 requires=\

rules/escc/default.bash

@@ -1,6 +1,6 @@
 version=\
 (
-    '1.0.6'
+    '1.0.71'
 )
 
 url=\
@@ -10,7 +10,7 @@ url=\
 
 md5=\
 (
-    '07783e66e27601ab0a8250c328b3d6bf'
+    '075c9256fe20cf6ce867dc2b1c974ebe'
 )
 
 if [ -d "$cfg_dir_builds/linux/linux-"* ]; then

rules/exiv2/default.bash

@@ -0,0 +1,57 @@
+version=\
+(
+  "0.25"
+)
+
+url=\
+(
+  "http://lsts.pt/glued/exiv2-${version}.tar.gz"
+)
+
+md5=\
+(
+  "258d4831b30f75a01e0234065c6c2806"
+)
+
+maintainer=\
+(
+    'Pedro Gonçalves <pedro@lsts.pt>'
+)
+
+requires=\
+(
+    "gettext/host"
+)
+
+configure()
+{
+  ./configure \
+    --datadir="$cfg_dir_toolchain_sysroot" \
+    --prefix="$cfg_dir_rootfs/usr" \
+    --includedir="$cfg_dir_toolchain_sysroot/usr/include" \
+    --enable-cross-compile \
+    --build=$cfg_target_linux \
+    --host="$cfg_target_canonical" \
+    --enable-shared \
+    --disable-static \
+    --disable-xmp
+}
+
+build()
+{
+  $cmd_make
+}
+
+host_install()
+{
+  $cmd_make install
+}
+
+target_install()
+{
+  # Libs:
+  for f in "$cfg_dir_rootfs/lib/"libexiv2*; do
+      cp -av "$f" "$cfg_dir_toolchain_sysroot/usr/lib"
+  done
+}
+

rules/ffmpeg/default.bash

@@ -15,12 +15,14 @@ md5=\
 
 configure()
 {
+    mkdir -p ../build
     ./configure \
         --sysroot="$cfg_dir_toolchain_sysroot" \
         --prefix="$cfg_dir_rootfs/usr" \
         --incdir="$cfg_dir_toolchain_sysroot/usr/include" \
         --enable-cross-compile \
         --cross-prefix="$cfg_target_canonical-" \
+        --libdir="$cfg_dir_builds/ffmpeg/build" \
         --target-os="linux" \
         --enable-shared \
         --disable-static \
@@ -39,10 +41,16 @@ host_install()
     $cmd_make \
 	LIBDIR="$cfg_dir_toolchain_sysroot/usr/lib" \
         install-headers
+
+    $cmd_make \
+        install-libs
 }
 
 target_install()
 {
     $cmd_make \
         install-libs
+
+    $cmd_cp -r "$cfg_dir_builds/ffmpeg/build/"* "$cfg_dir_rootfs/usr/lib/"
+    $cmd_cp -r "$cfg_dir_builds/ffmpeg/build/"* "$cfg_dir_toolchain_sysroot/usr/lib/"
 }

rules/filesystem/fs/etc/rc.d/check_wlan

@@ -0,0 +1,15 @@
+start()
+{
+    if [ ! -f /opt/check_wlan ]; then
+        cp -ri /etc/check_wlan /opt/
+    fi
+
+    sh /opt/check_wlan  < /dev/null > /dev/null 2>&1 &
+}
+
+stop()
+{
+    echo "* Stopping process..."
+    killall sh /opt/check_wlan -9 > /dev/null 2>&1
+    echo "* Process not running."
+}

rules/filesystem/fs/etc/rc.d/network-wlan

@@ -0,0 +1,87 @@
+start()
+{
+    ifconfig wlan0 up
+    if [ -n "$cfg_eth_ext_ip$cfg_eth_prv_ip" ]; then
+        while [ 1 ]; do
+            echo "* Waiting for wlan0 device..."
+            ifconfig wlan0 > /dev/null 2>&1
+            [ $? -eq 0 ] && break
+            usleep 250000
+        done
+    fi
+
+    if [ -n "$cfg_bridge0_ip" ]; then
+        for itf in $cfg_bridge0_itfs; do
+            ifconfig $itf 0.0.0.0
+        done
+
+        brctl addbr bridge0
+
+        for itf in $cfg_bridge0_itfs; do
+            brctl addif bridge0 $itf
+        done
+
+        ifconfig bridge0 $cfg_bridge0_ip netmask $cfg_bridge0_nmask up
+        ifconfig bridge0 multicast
+        route add -net 224.0.0.0 netmask 240.0.0.0 dev bridge0
+    fi
+
+    # Public ethernet.
+    if [ -n "$cfg_eth_ext_ip" ]; then
+        if [ -n "$cfg_eth_ext_mk" ]; then
+            ifconfig wlan0 "$cfg_eth_ext_ip" netmask "$cfg_eth_ext_mk" up
+        else
+            ifconfig wlan0 "$cfg_eth_ext_ip" up
+        fi
+        ifconfig wlan0 multicast
+        route add -net 224.0.0.0 netmask 240.0.0.0 dev wlan0
+
+        # Fixed mac address with $cfg_eth_ext_mac based derivated from IP address $cfg_eth_ext_ip
+        if [ -n "$cfg_eth_ext_mac" ]; then
+          ifconfig wlan0 hw ether $cfg_eth_ext_mac
+        fi
+    fi
+
+    if [ -n "$cfg_eth_ext_gw" ]; then
+        route add default gw "$cfg_eth_ext_gw"
+    fi
+
+    if [ -n "$cfg_eth_ext_dns" ]; then
+        echo "nameserver $cfg_eth_ext_dns" > /etc/resolv.conf
+    fi
+
+    # Private ethernet.
+    if [ -n "$cfg_eth_prv_ip" ]; then
+        ifconfig wlan0:prv "$cfg_eth_prv_ip" up
+    fi
+
+    # Static ARP table.
+    if [ -n "$cfg_arp_table" ]; then
+        for e in $cfg_arp_table; do
+            ip="$(echo $e | cut -f1 -d'|')"
+            mac="$(echo $e | cut -f2 -d'|')"
+            arp -s "$ip" "$mac"
+        done
+    fi
+
+    iw wlan0 connect LSTS
+    ifconfig eth0 down
+}
+
+stop()
+{
+    # Public ethernet.
+    if [ -n "$cfg_eth_ext_gw" ]; then
+        route del default
+    fi
+
+    if [ -n "$cfg_eth_ext_ip" ]; then
+        route del -net 224.0.0.0 netmask 240.0.0.0 dev wlan0
+        ifconfig wlan0 down
+    fi
+
+    # Private ethernet.
+    if [ -n "$cfg_eth_prv_ip" ]; then
+        ifconfig wlan0:prv down
+    fi
+}

rules/filesystem/fs/etc/rc.d/upgrade

@@ -60,24 +60,17 @@ new_unpack()
     return 1
 }
 
-kernel_dst()
+kernel_mtd_part()
 {
-    echo -n "* Detecting kernel destination... "
+    echo -n "* Detecting kernel MTD partition... "
 
-    # Kernel resides in the root filesystem.
     if [ -d /boot/extlinux ]; then
-        echo "filesystem"
+        echo "not present"
         return 0
     fi
 
     if ! [ -f /proc/mtd ]; then
-        echo "filesystem"
-        return 0
-    fi
-
-    grep 'uboot=ext2' /proc/cmdline > /dev/null 2>&1
-    if [ $? -eq 0 ]; then
-        echo "filesystem"
+        echo "not present"
         return 0
     fi
 
@@ -85,21 +78,65 @@ kernel_dst()
     if [ -z "$fw_kernel_mtd" ]; then
         export fw_kernel_mtd="$(grep \"Kernel\" /proc/mtd | cut -f1 -d':')"
         if [ -z "$fw_kernel_mtd" ]; then
-            echo "failed to detect kernel's MTD partition"
+            echo "not present"
             return 1
         fi
     fi
 
-    echo "mtd"
+    echo "$fw_kernel_mtd"
     return 0
 }
 
-kernel_upgrade()
+uboot_mtd_part()
+{
+    echo -n "* Detecting u-boot MTD partition... "
+    if ! [ -f /proc/mtd ]; then
+        echo "filesystem"
+        return 0
+    fi
+
+    export fw_uboot_mtd="$(grep \"uboot\" /proc/mtd | cut -f1 -d':')"
+    if [ -z "$fw_uboot_mtd" ]; then
+        export fw_uboot_mtd="$(grep \"u-boot\" /proc/mtd | cut -f1 -d':')"
+        if [ -z "$fw_uboot_mtd" ]; then
+            echo "not present"
+            return 1
+        fi
+    fi
+
+    echo "$fw_uboot_mtd"
+    return 0
+}
+
+uboot_mtd_upgrade()
+{
+    bin="$base/.glued-new/boot/u-boot.bin"
+
+    if ! [ -f "$bin" ]; then
+        return 0
+    fi
+
+    if [ -z "$fw_uboot_mtd" ]; then
+        return 0
+    fi
+
+    echo -n "* Upgrading u-boot MTD partition... "
+    "$flashcp" -v "$bin" /dev/"$fw_uboot_mtd"
+    if [ $? -ne 0 ]; then
+        echo "failed"
+        return 1
+    fi
+
+    echo "done"
+    return 0
+}
+
+kernel_mtd_upgrade()
 {
     # Upgrade MTD
     if [ -n "$fw_kernel_mtd" ]; then
         echo -n "* Upgrading kernel... "
-        "$flashcp" -v "$base/.glued-new/boot/kernel" /dev/"$fw_kernel_mtd" > /dev/null 2>&1
+        "$flashcp" -v "$base/.glued-new/boot/kernel" /dev/"$fw_kernel_mtd"
         if [ $? -ne 0 ]; then
             echo "failed"
             return 1
@@ -202,12 +239,19 @@ rpi2_boot_part_upgrade()
         fi
     done
 
-    dtb="bcm2709-rpi-2-b.dtb"
-    if [ -f "/mnt/$dtb" ]; then
+    for f in overlays; do
+        if [ -d "/mnt/$f" ]; then
+            echo -en "* $label: Replacing $f... "
+	    rm -rf "/mnt/$f" && cp -r "$base/.glued-new/boot/$f" /mnt
+            echo 'done'
+        fi
+    done
+
+    for dtb in "$base/.glued-new/boot/"*.dtb; do
         echo -en "* $label: Replacing $dtb... "
-        cp "$base/.glued-new/boot/board.dtb" "/mnt/$dtb"
+        cp "$dtb" "/mnt"
         echo 'done'
-    fi
+    done
 
     kernel='kernel7.img'
     if [ -f "/mnt/$kernel" ]; then
@@ -228,15 +272,17 @@ rpi2_boot_part_upgrade()
     return 0
 }
 
-# Check if board is a Raspberry Pi 2.
+# Check if board is a Raspberry Pi 2/3.
 rpi2_boot_part_upgrade_check()
 {
-    dmesg | grep Machine | grep BCM2709 > /dev/null 2>&1
-    if [ $? -eq 0 ]; then
-        echo "* rpi2: machine detected"
-        rpi2_boot_part_upgrade "rpi2" "/dev/mmcblk0p1"
-        return 0
-    fi
+    for machine in 'bcm2709' 'raspberry pi'; do
+        dmesg | grep Machine | grep -i "$machine" > /dev/null 2>&1
+        if [ $? -eq 0 ]; then
+            echo "* rpi2: machine detected"
+            rpi2_boot_part_upgrade "rpi2" "/dev/mmcblk0p1"
+            return 0
+        fi
+    done
 }
 
 old_move()
@@ -284,11 +330,13 @@ start()
 {
     clean
     version || return 1
-    kernel_dst || return 1
+    kernel_mtd_part || return 1
+    uboot_mtd_part || return 1
     new_unpack || return 1
     uboot_part_upgrade_check || return 1
     rpi2_boot_part_upgrade_check || return 1
-    kernel_upgrade || return 1
+    kernel_mtd_upgrade || return 1
+    uboot_mtd_upgrade || return 1
     old_move || return 1
 }
 

rules/htop/default.bash

@@ -0,0 +1,37 @@
+version=\
+(
+    '2.0.2'
+)
+
+url=\
+(
+    "https://hisham.hm/htop/releases/$version/htop-$version.tar.gz"
+)
+
+md5=\
+(
+    '7d354d904bad591a931ad57e99fea84a'
+)
+
+maintainer=\
+(
+    'Jose Pinto <zepinto@lsts.pt>'
+)
+
+build()
+{
+    $cmd_make
+}
+
+configure()
+{
+    cd "../htop-$version"
+    ./configure --disable-unicode --prefix="${cfg_dir_rootfs}"
+}
+
+target_install()
+{
+    cd "../htop-$version"
+    $cmd_make install
+}
+

rules/iw/default.bash

@@ -0,0 +1,34 @@
+version=\
+(
+    "4.9"
+)
+
+url=\
+(
+    "http://lsts.pt/glued/iw-$version.tar.bz2"
+)
+
+md5=\
+(
+  "ae8ccaa154449300c2c02eb90a37eebb"
+)
+
+maintainer=\
+(
+    'Pedro Gonçalves <pedro@lsts.pt>'
+)
+
+configure()
+{
+    mv "../iw_$version/etc" "../iw-$version/"
+    mv "../iw_$version/lib" "../iw-$version/"
+    mv "../iw_$version/sbin" "../iw-$version/"
+}
+
+target_install()
+{
+    $cmd_cp -r "etc/"* "$cfg_dir_rootfs/etc/"
+    $cmd_cp -r "sbin/"* "$cfg_dir_rootfs/sbin/"
+    $cmd_cp -r "lib/"* "$cfg_dir_rootfs/lib/"
+    $cmd_cp -r "$pkg_dir/fs/"* "$cfg_dir_rootfs/"
+}

rules/iw/fs/etc/check_wlan

@@ -0,0 +1,46 @@
+#!/bin/bash
+export PATH=/bin:/sbin:/usr/bin:/usr/sbin:/usr/bin:/bin
+
+############################# USER INPUT ###########################
+
+ip_dest=10.0.30.3
+
+####################################################################
+
+
+############### DON'T EDIT ##########################################
+
+check_interval=1
+log=/opt/.wifi.log
+wlan=wlan0
+eth=eth0
+
+exec 1> /dev/null
+exec 2>> $log
+echo $(date) > $log
+# without check_interval set, we risk a 0 sleep = busy loop
+if [ ! "$check_interval" ]; then
+        echo "No check interval set!" >> $log
+        exit 1
+fi
+
+startWifi () {
+   iw wlan0 connect LSTS >> $log
+}
+
+ifconfig $eth down
+ifconfig $wlan up
+
+while [ 1 ]; do
+        ping -q -c1 $ip_dest > /dev/null
+        if [ $? -ne 0 ]; then
+                echo $(date)" attempting restart..." >> $log
+                startWifi
+                sleep 1
+        else
+                echo "IS LINKED" >> $log
+                sleep $check_interval
+        fi
+done
+
+#####################################################################

rules/kmod/host.bash

@@ -16,5 +16,5 @@ build()
 host_install()
 {
     $cmd_make install &&
-    ln -fs kmod "$cfg_dir_toolchain/sbin/depmod"
+    ln -fs ../bin/kmod "$cfg_dir_toolchain/sbin/depmod"
 }

rules/libpng/default.bash

@@ -1,6 +1,6 @@
 version=\
 (
-    '1.6.19'
+    '1.6.23'
 )
 
 url=\
@@ -10,7 +10,7 @@ url=\
 
 md5=\
 (
-    '1e6a458429e850fc93c1f3b6dc00a48f'
+    '9b320a05ed4db1f3f0865c8a951fd9aa '
 )
 
 configure()

rules/linux-headers/cross.bash

@@ -1,16 +1,16 @@
 version=\
 (
-    '3.14.63'
+    '4.4.66'
 )
 
 url=\
 (
-    "https://www.kernel.org/pub/linux/kernel/v3.x/linux-$version.tar.xz"
+    "https://www.kernel.org/pub/linux/kernel/v4.x/linux-$version.tar.xz"
 )
 
 md5=\
 (
-    '6cf8a6b23849f47f511e0e46cfdb6392'
+    '5353de56bf4621a35afc4384c7e51f30'
 )
 
 maintainer=\

rules/linux/default.bash

@@ -1,16 +1,16 @@
 version=\
 (
-    '3.14.63'
+    '4.4.66'
 )
 
 url=\
 (
-    "https://www.kernel.org/pub/linux/kernel/v3.x/linux-$version.tar.xz"
+    "https://www.kernel.org/pub/linux/kernel/v4.x/linux-$version.tar.xz"
 )
 
 md5=\
 (
-    '6cf8a6b23849f47f511e0e46cfdb6392'
+    '5353de56bf4621a35afc4384c7e51f30'
 )
 
 maintainer=\
@@ -25,13 +25,62 @@ requires=\
     'lz4/host'
 )
 
+# This variable is updated by find_patches().
+patches=()
+
+# Major/Minor version.
+linux_mm_version()
+{
+    echo "$version" | cut -f1-2 -d.
+}
+
+# Major/Minor/Patch version.
+linux_mmp_version()
+{
+    echo "$version" | cut -f1 -d-
+}
+
+find_patches()
+{
+    patches=(\
+        $(ls -1 \
+             "$pkg_dir/patches/$version/"*.patch \
+             "$pkg_dir/patches/$(linux_mmp_version)/"*.patch \
+             "$pkg_dir/patches/$(linux_mm_version)/"*.patch \
+             "$cfg_dir_system/patches/linux/$version/"*.patch \
+             "$cfg_dir_system/patches/linux/$(linux_mmp_version)/"*.patch \
+             "$cfg_dir_system/patches/linux/$(linux_mm_version)/"*.patch \
+             2> /dev/null | awk '!a[$0]++')
+    )
+}
+
+find_patches
+
+# Get configuration file.
+linux_cfg_file()
+{
+    for f in "$version" "$(linux_mmp_version)" "$(linux_mm_version)"; do
+        f="$cfg_dir_system/cfg/linux-$f.cfg"
+        if [ -f "$f" ]; then
+            echo "$f"
+            return 0
+        fi
+
+        echo "Candidate kernel configuration file '$f' doesn't exist." 1>&2
+    done
+
+    echo "ERROR: failed to find a valid kernel configuration file." 1>&2
+    return 1
+}
+
 post_unpack()
 {
-    patches=$(ls "$pkg_dir/patches/$version/"*.patch\
-	"$cfg_dir_system/patches/linux/$version/"*.patch 2>/dev/null)
-    if [ -n "$patches" ]; then
-        cat $patches | patch -p1
-    fi
+    n=0; while [ -n "${patches[$n]}" ]; do
+             patch="${patches[$n]}"
+             echo "* Applying $patch..."
+             (ucat "$patch" | patch -p1) || return 1
+             let n++
+         done
 
     if [ -d "$cfg_dir_toolchain/firmware" ]; then
         tar -C "$cfg_dir_toolchain/firmware" -c -v -f - . | tar -C firmware -x -v -f -
@@ -41,7 +90,7 @@ post_unpack()
 refresh()
 {
     for rule in configure build target_install; do
-        if [ "$cfg_dir_system/cfg/linux-${version}.cfg" -nt "$cfg_dir_builds/linux/$pkg_var/.$rule" ]; then
+        if [ "$(linux_cfg_file)" -nt "$cfg_dir_builds/linux/$pkg_var/.$rule" ]; then
             rm "$cfg_dir_builds/linux/$pkg_var/.$rule"
         fi
     done
@@ -51,9 +100,11 @@ configure()
 {
     $cmd_make \
         ARCH=${cfg_target_linux} \
-        mrproper &&
+        mrproper || return 1
 
-    cp "$cfg_dir_system/cfg/linux-${version}.cfg" .config &&
+    cfg="$(linux_cfg_file)"
+    [ -n "$cfg" ] || return 1
+    $cmd_cp "$cfg" .config || return 1
 
     if [ -f "$cfg_dir_system/files/initramfs_init.sh" ]; then
         $cmd_mkdir initramfs &&
@@ -72,17 +123,20 @@ build()
 {
     $cmd_make \
         CROSS_COMPILE=$cfg_target_canonical- \
-        ARCH=$cfg_target_linux &&
+        ARCH=$cfg_target_linux || return 1
+
     $cmd_make \
         CROSS_COMPILE=$cfg_target_canonical- \
         ARCH=$cfg_target_linux \
-        modules &&
+        DEPMOD="$cfg_dir_toolchain/sbin/depmod" \
+        modules || return 1
 
     if [ "$(basename $cfg_target_linux_kernel)" = 'uImage' ]; then
         $cmd_make \
             CROSS_COMPILE=$cfg_target_canonical- \
             ARCH=$cfg_target_linux \
-            uImage
+            DEPMOD="$cfg_dir_toolchain/sbin/depmod" \
+            uImage || return 1
     fi
 
     # Compressed image.
@@ -90,7 +144,8 @@ build()
         $cmd_make \
             CROSS_COMPILE=$cfg_target_canonical- \
             ARCH=$cfg_target_linux \
-            zImage
+            DEPMOD="$cfg_dir_toolchain/sbin/depmod" \
+            zImage || return 1
     fi
 
     # Device tree blob.
@@ -98,7 +153,8 @@ build()
         $cmd_make \
             CROSS_COMPILE=$cfg_target_canonical- \
             ARCH=$cfg_target_linux \
-            dtbs
+            DEPMOD="$cfg_dir_toolchain/sbin/depmod" \
+            dtbs || return 1
     fi
 
     if [ -n "${cfg_target_linux_size}" ]; then
@@ -108,15 +164,6 @@ build()
     fi
 }
 
-host_install()
-{
-    # Device tree blobs.
-    if [ -n "$cfg_target_linux_dtb" ]; then
-        $cmd_mkdir "$cfg_dir_toolchain/boot" &&
-            cp -v "$(dirname $cfg_target_linux_dtb)/"*.dtb "$cfg_dir_toolchain/boot"
-    fi
-}
-
 target_install()
 {
     if [ -n "$(file "$cfg_target_linux_kernel" | grep ELF)" ]; then
@@ -132,15 +179,33 @@ target_install()
         return 1
     fi
 
+    # Device tree blobs.
+    dts="arch/$cfg_target_linux/boot/dts"
+    if [ -d "$dts" ]; then
+        $cmd_mkdir "$cfg_dir_rootfs/boot" &&
+            cp -v "$dts/"*.dtb "$cfg_dir_rootfs/boot"
+    fi
+
+    # Device tree overlays.
+    overlays_dir="arch/$cfg_target_linux/boot/dts/overlays"
+    if [ -d "$overlays_dir" ]; then
+	$cmd_mkdir "$cfg_dir_rootfs/boot/overlays" || return 1
+        $cmd_cp "$overlays_dir"/*.dtbo "$cfg_dir_rootfs/boot/overlays" || return 1
+    fi
+
     $cmd_make \
         CROSS_COMPILE="$cfg_target_canonical-" \
         ARCH="$cfg_target_linux" \
         INSTALL_MOD_PATH="$cfg_dir_rootfs/usr" \
+        KBUILD_VERBOSE=1 \
+        DEPMOD="$cfg_dir_toolchain/sbin/depmod" \
         modules_install
 
     $cmd_make \
         CROSS_COMPILE="$cfg_target_canonical-" \
         ARCH="$cfg_target_linux" \
         INSTALL_MOD_PATH="$cfg_dir_rootfs/usr" \
+        KBUILD_VERBOSE=1 \
+        DEPMOD="$cfg_dir_toolchain/sbin/depmod" \
         firmware_install
 }

rules/linux/rpi.bash

@@ -2,21 +2,19 @@
 
 version=\
 (
-    '3.18_2015-06-03'
+    '4.4_2017-01-27'
 )
 
 url=\
 (
-    "https://github.com/rasmartins/rpi-linux/archive/rpi-linux-$version.tar.gz"
+    "http://lsts.pt/glued/rpi-linux-$version.zip"
 )
 
 md5=\
 (
-    '0b0255e50ca358b619bb78653ac2db2e'
+    'f31d48a9d2c93509b35e750be489b44c'
 )
 
-post_unpack()
-{
-    rmdir "../linux-$version" &&
-        mv "../rpi-linux-rpi-linux-$version" "../linux-$version"
-}
+build_dir="rpi-linux-rpi-linux-$version"
+
+find_patches

rules/linux/rt.bash

@@ -0,0 +1,27 @@
+. "$cfg_dir_rules/$pkg/default.bash"
+
+version=\
+(
+    '4.4.66-rt79'
+)
+
+url=\
+(
+    "https://www.kernel.org/pub/linux/kernel/v4.x/linux-$(linux_mmp_version).tar.xz"
+    "https://www.kernel.org/pub/linux/kernel/projects/rt/$(linux_mm_version)/patch-$version.patch.gz"
+)
+
+md5=\
+(
+    'd68173a31fb60e2195a4015fe1f83e97'
+    '03be9388659d844c362e507ddba2d777'
+)
+
+maintainer=\
+(
+    'Ricardo Martins <rasm@oceanscan-mst.com>'
+)
+
+patches=("$cfg_dir_downloads/patch-$version.patch.gz" "${patches[@]}")
+
+build_dir="linux-$(linux_mmp_version)"

rules/linux/v3_14.bash

@@ -0,0 +1,212 @@
+version=\
+(
+    '3.14.63'
+)
+
+url=\
+(
+    "https://www.kernel.org/pub/linux/kernel/v3.x/linux-$version.tar.xz"
+)
+
+md5=\
+(
+    '6cf8a6b23849f47f511e0e46cfdb6392'
+)
+
+maintainer=\
+(
+    'Ricardo Martins <rasm@fe.up.pt>'
+)
+
+requires=\
+(
+    'bc/host'
+    'kmod/host'
+    'lz4/host'
+)
+
+# This variable is updated by find_patches().
+patches=()
+
+# Major/Minor version.
+linux_mm_version()
+{
+    echo "$version" | cut -f1-2 -d.
+}
+
+# Major/Minor/Patch version.
+linux_mmp_version()
+{
+    echo "$version" | cut -f1 -d-
+}
+
+find_patches()
+{
+    patches=(\
+        $(ls -1 \
+             "$pkg_dir/patches/$version/"*.patch \
+             "$pkg_dir/patches/$(linux_mmp_version)/"*.patch \
+             "$pkg_dir/patches/$(linux_mm_version)/"*.patch \
+             "$cfg_dir_system/patches/linux/$version/"*.patch \
+             "$cfg_dir_system/patches/linux/$(linux_mmp_version)/"*.patch \
+             "$cfg_dir_system/patches/linux/$(linux_mm_version)/"*.patch \
+             2> /dev/null | awk '!a[$0]++')
+    )
+}
+
+find_patches
+
+# Get configuration file.
+linux_cfg_file()
+{
+    for f in "$version" "$(linux_mmp_version)" "$(linux_mm_version)"; do
+        f="$cfg_dir_system/cfg/linux-$f.cfg"
+        if [ -f "$f" ]; then
+            echo "$f"
+            return 0
+        fi
+
+        echo "Candidate kernel configuration file '$f' doesn't exist." 1>&2
+    done
+
+    echo "ERROR: failed to find a valid kernel configuration file." 1>&2
+    return 1
+}
+
+post_unpack()
+{
+    cp -r ../linux-3.14.63/* ../linux_3.3-3.14.63
+    n=0; while [ -n "${patches[$n]}" ]; do
+             patch="${patches[$n]}"
+             echo "* Applying $patch..."
+             (ucat "$patch" | patch -p1) || return 1
+             let n++
+         done
+
+    if [ -d "$cfg_dir_toolchain/firmware" ]; then
+        tar -C "$cfg_dir_toolchain/firmware" -c -v -f - . | tar -C firmware -x -v -f -
+    fi
+}
+
+refresh()
+{
+    for rule in configure build target_install; do
+        if [ "$(linux_cfg_file)" -nt "$cfg_dir_builds/linux/$pkg_var/.$rule" ]; then
+            rm "$cfg_dir_builds/linux/$pkg_var/.$rule"
+        fi
+    done
+}
+
+configure()
+{
+    $cmd_make \
+        ARCH=${cfg_target_linux} \
+        mrproper || return 1
+
+    cfg="$(linux_cfg_file)"
+    [ -n "$cfg" ] || return 1
+    $cmd_cp "$cfg" .config || return 1
+
+    if [ -f "$cfg_dir_system/files/initramfs_init.sh" ]; then
+        $cmd_mkdir initramfs &&
+        $cmd_cp "$pkg_dir/files/initramfs.conf" . &&
+        $cmd_cp "$cfg_dir_system/files/initramfs_init.sh" initramfs/init.sh &&
+        $cmd_cp "$cfg_dir_rootfs/bin/busybox" initramfs/busybox
+    fi
+
+    yes '' | $cmd_make \
+        CROSS_COMPILE=${cfg_target_canonical}- \
+        ARCH=${cfg_target_linux} \
+        oldconfig
+}
+
+build()
+{
+    $cmd_make \
+        CROSS_COMPILE=$cfg_target_canonical- \
+        ARCH=$cfg_target_linux || return 1
+
+    $cmd_make \
+        CROSS_COMPILE=$cfg_target_canonical- \
+        ARCH=$cfg_target_linux \
+        DEPMOD="$cfg_dir_toolchain/sbin/depmod" \
+        modules || return 1
+
+    if [ "$(basename $cfg_target_linux_kernel)" = 'uImage' ]; then
+        $cmd_make \
+            CROSS_COMPILE=$cfg_target_canonical- \
+            ARCH=$cfg_target_linux \
+            DEPMOD="$cfg_dir_toolchain/sbin/depmod" \
+            uImage || return 1
+    fi
+
+    # Compressed image.
+    if [ "$(basename $cfg_target_linux_kernel)" = 'zImage' ]; then
+        $cmd_make \
+            CROSS_COMPILE=$cfg_target_canonical- \
+            ARCH=$cfg_target_linux \
+            DEPMOD="$cfg_dir_toolchain/sbin/depmod" \
+            zImage || return 1
+    fi
+
+    # Device tree blob.
+    if [ -n "$cfg_target_linux_dtb" ]; then
+        $cmd_make \
+            CROSS_COMPILE=$cfg_target_canonical- \
+            ARCH=$cfg_target_linux \
+            DEPMOD="$cfg_dir_toolchain/sbin/depmod" \
+            dtbs || return 1
+    fi
+
+    if [ -n "${cfg_target_linux_size}" ]; then
+        dd if="$cfg_target_linux_kernel" of="${cfg_target_linux_kernel}.padded" \
+            ibs="${cfg_target_linux_size}" conv=sync &&
+        mv "${cfg_target_linux_kernel}.padded" "${cfg_target_linux_kernel}"
+    fi
+}
+
+target_install()
+{
+    if [ -n "$(file "$cfg_target_linux_kernel" | grep ELF)" ]; then
+        strip="$(echo $cfg_dir_toolchain/bin/*-strip)"
+        $strip -s -R .comment "$cfg_target_linux_kernel"
+    fi
+
+    # Kernel image.
+    if [ -n "$cfg_target_linux_kernel" ]; then
+        cp -v "$cfg_target_linux_kernel" "$cfg_dir_rootfs/boot/kernel"
+    else
+        echo "ERROR: failed to find kernel image at '$cfg_target_linux_kernel'"
+        return 1
+    fi
+
+    # Device tree blobs.
+    dts="arch/$cfg_target_linux/boot/dts"
+    if [ -d "$dts" ]; then
+        $cmd_mkdir "$cfg_dir_rootfs/boot" &&
+            cp -v "$dts/"*.dtb "$cfg_dir_rootfs/boot"
+    fi
+
+    # Device tree overlays.
+    overlays_dir="arch/$cfg_target_linux/boot/dts/overlays"
+    if [ -d "$overlays_dir" ]; then
+	$cmd_mkdir "$cfg_dir_rootfs/boot/overlays" || return 1
+        $cmd_cp "$overlays_dir"/*.dtbo "$cfg_dir_rootfs/boot/overlays" || return 1
+    fi
+
+    $cmd_make \
+        CROSS_COMPILE="$cfg_target_canonical-" \
+        ARCH="$cfg_target_linux" \
+        INSTALL_MOD_PATH="$cfg_dir_rootfs/usr" \
+        KBUILD_VERBOSE=1 \
+        DEPMOD="$cfg_dir_toolchain/sbin/depmod" \
+        modules_install
+
+    $cmd_make \
+        CROSS_COMPILE="$cfg_target_canonical-" \
+        ARCH="$cfg_target_linux" \
+        INSTALL_MOD_PATH="$cfg_dir_rootfs/usr" \
+        KBUILD_VERBOSE=1 \
+        DEPMOD="$cfg_dir_toolchain/sbin/depmod" \
+        firmware_install
+}

rules/lpg/default.bash

@@ -0,0 +1,29 @@
+version=\
+(
+	   "1.2"
+)
+
+url=\
+(
+    "http://lsts.pt/glued/lpg-$version.tar.gz"
+)
+
+md5=\
+(
+    "beb0f3b8be474868b074dca66ced5b48"
+)
+
+configure()
+{
+    ./configure "$cfg_target_canonical-gcc"
+}
+
+build()
+{
+    $cmd_make
+}
+
+target_install()
+{
+    $cmd_cp "lpg" "$cfg_dir_rootfs/usr/bin"
+}

rules/necsave/default.bash

@@ -1,79 +0,0 @@
-version=\
-(
-    'master'
-)
-
-branch=\
-(
-    'master'
-)
-
-maintainer=\
-(
-    "Jose Pinto <zepinto@fe.up.pt>"
-)
-
-requires=\
-(
-    'jansson/default'
-    'czmq/default'
-    'boost/default'
-    'cmake/host'
-    'dune/default'
-)
-
-download()
-{
-    git clone -b $branch "git@necsave.info:necsave/communications.git" source &&
-    cd source && 
-    ./update.sh &&
-    cd -
-}
-
-configure()
-{
-    $cmd_mkdir build && cd build
-    PKG_CONFIG_PATH="$cfg_dir_toolchain_sysroot/usr/lib/pkgconfig" \
-    cmake \
-        -DCMAKE_INSTALL_PREFIX="$cfg_dir_toolchain_sysroot/usr/necsave" \
-        -DCMAKE_CXX_COMPILER="$cmd_target_cxx" \
-        -DCMAKE_C_COMPILER="$cmd_target_cc" \
-        -DCMAKE_FIND_ROOT_PATH:PATH="$cfg_dir_toolchain_sysroot/usr" \
-        -DDUNE_HOME="$cfg_dir_toolchain_sysroot/usr" \
-        -DCMAKE_SYSTEM_NAME:STRING=Linux \
-        -DCMAKE_FIND_ROOT_PATH_MODE_INCLUDE:STRING=BOTH \
-        -DCMAKE_FIND_ROOT_PATH_MODE_LIBRARY:STRING=ONLY \
-        -DCMAKE_FIND_ROOT_PATH_MODE_PROGRAM:STRING=BOTH \
-        ../source
-}
-
-refresh()
-{
-  cd ../default
-  rm .build .host_install .target_install .postconfigure
-  cd -
-  cd integration && git pull && cd - &&
-  cd source && git pull && cd - &&
-  for r in duneplatform missionplanner perception vehicleplanner; do
-            cd "source/src/Modules/$r" && git pull && cd -
-        done
-}
-
-build()
-{
-    $cmd_make -C build
-}
-
-host_install()
-{
-    $cmd_make -C build install
-}
-
-#target_install()
-#{
-#    rm -rf "$cfg_dir_rootfs/usr/necsave" &&
-#        $cmd_cp -r "$cfg_dir_toolchain_sysroot/usr/necsave" "$cfg_dir_rootfs/usr" &&
-#        ln -fs /opt/lsts/necsave/log "$cfg_dir_rootfs/usr/necsave/log" &&
-#    $cmd_cp -r "integration/REP16"/* "$cfg_dir_rootfs/usr/necsave"
-#
-#}

rules/opencv/default.bash

@@ -1,6 +1,6 @@
 version=\
 (
-    "2.4.11"
+    "2.4.13"
 )
 
 url=\
@@ -10,7 +10,7 @@ url=\
 
 md5=\
 (
-    '32f498451bff1817a60e1aabc2939575'
+    '886b0c511209b2f3129649928135967c'
 )
 
 requires=\

rules/raspicam/default.bash

@@ -0,0 +1,60 @@
+version=\
+(
+    "1.0.0"
+)
+
+url=\
+(
+    "http://lsts.pt/glued/raspicam-$version.zip"
+)
+
+md5=\
+(
+  "169e62fd17d41455a42711a2f9c54fd1"
+)
+
+maintainer=\
+(
+    'Pedro Gonçalves <pedro@lsts.pt>'
+)
+
+requires=\
+(
+    'uv4l/default'
+    'cmake/host'
+)
+
+configure()
+{
+    LINKER_ADDED_FLAGS="-Wl,-rpath,${cfg_dir_rootfs}/usr/lib"
+
+    ${cfg_dir_toolchain}/usr/local/bin/cmake \
+        -DCMAKE_SYSTEM_NAME="Linux" \
+        -DCMAKE_SYSTEM_VERSION="1" \
+        -DCMAKE_FIND_ROOT_PATH="${cfg_dir_toolchain_sysroot}/usr ${cfg_dir_rootfs}/usr" \
+        -DCMAKE_FIND_ROOT_PATH_MODE_INCLUDE=ONLY \
+        -DCMAKE_FIND_ROOT_PATH_MODE_LIBRARY=ONLY \
+        -DCMAKE_C_COMPILER="${cmd_target_cc}" \
+        -DCMAKE_CXX_COMPILER="${cmd_target_cxx}" \
+        -DCMAKE_C_FLAGS="${cfg_target_gcc_flags}" \
+	.
+}
+
+build()
+{
+    $cmd_make VERBOSE=1
+}
+
+host_install()
+{
+    cd build/
+    $cmd_cp -r "lib/"* "$cfg_dir_toolchain_sysroot/usr/lib/"
+    $cmd_cp -r "inc/"* "$cfg_dir_toolchain_sysroot/usr/include/"
+}
+
+target_install()
+{
+    cd build/
+    $cmd_cp -r "lib/"* "$cfg_dir_rootfs/usr/lib/"
+    $cmd_cp -r "bin/"* "$cfg_dir_rootfs/usr/bin/"
+}

rules/rpi-boot-firmware/default.bash

@@ -1,31 +1,29 @@
 version=\
 (
-    '2015-06-03'
+    '2017-02-02'
 )
 
 url=\
 (
-    "https://github.com/rasmartins/rpi-boot-firmware/archive/rpi-boot-firmware-$version.tar.gz"
+    "http://lsts.pt/glued/rpi-boot-firmware-$version.zip"
 )
 
 maintainer=\
 (
     'Ricardo Martins <rasm@fe.up.pt>'
+    'Pedro Gonçalves <pedro@lsts.pt>'
 )
 
 md5=\
 (
-    'a80ee36b66cccda4e9ccb7eb26bd6bb8'
+    'eb42664fce4d73f167064e697dfacb76'
 )
 
 target_install()
 {
-    $cmd_mkdir \
-        "$cfg_dir_rootfs/boot" &&
+    $cmd_mkdir "$cfg_dir_rootfs/boot"
 
-    for f in bootcode.bin fixup.dat start.elf; do
-        $cmd_cp -r "../$pkg-$pkg-$version/$f" "$cfg_dir_rootfs/boot"
-    done &&
+    $cmd_cp "../$pkg-$version/"* "$cfg_dir_rootfs/boot/"
 
     tar -C "$pkg_dir/fs" -c -f - . | tar -C "$cfg_dir_rootfs" -x -v -f -
 }

rules/rpi-boot-firmware/fs/boot/cmdline.txt

@@ -1 +1 @@
-dwc_otg.lpm_enable=0 console=ttyAMA0,115200,8n1 root=/dev/mmcblk0p2 elevator=deadline rootwait quiet
+dwc_otg.lpm_enable=0 console=tty1 root=/dev/mmcblk0p2 elevator=deadline rootwait quiet

rules/rpi-boot-firmware/fs/boot/config.txt

@@ -1 +0,0 @@
-arm_freq=1000

rules/rt-tests/default.bash

@@ -0,0 +1,32 @@
+version=\
+(
+    '0.96'
+)
+
+url=\
+(
+    "https://www.kernel.org/pub/linux/utils/rt-tests/rt-tests-$version.tar.gz"
+)
+
+md5=\
+(
+    '590b2340f66993a978d9806a734d5ea8'
+)
+
+maintainer=\
+(
+    'Kristian Klausen <kristian.klausen@itk.ntnu.no>'
+)
+
+build()
+{
+    $cmd_make \
+	CC=$cmd_target_cc cyclictest \
+	CFLAGS="$cfg_target_gcc_flags" 
+}
+
+target_install()
+{
+    cp -a cyclictest "$cfg_dir_rootfs/usr/bin/" &&
+    $cmd_target_strip "$cfg_dir_rootfs/usr/bin/cyclictest"
+}

rules/rtklib/default.bash

@@ -34,7 +34,7 @@ build()
     cd app/str2str/gcc
     $cmd_make \
 	CC=$cmd_target_cc \
-	CTARGET="$cfg_target_gcc_flags" \
+	CTARGET="${cfg_target_gcc_flags} -DSVR_REUSEADDR" \
 	BINDIR="${cfg_dir_toolchain_sysroot}/usr/bin" 
 	
     cd ../../rtkrcv/gcc

rules/u-boot/default.bash

@@ -43,11 +43,11 @@ host_install()
 
 target_install()
 {
-    if [ -f MLO ]; then
-        $cmd_cp MLO "$cfg_dir_rootfs/boot"
-    fi
+    $cmd_mkdir "$cfg_dir_rootfs/boot"
 
-    if [ -f u-boot.img ]; then
-        $cmd_cp u-boot.img "$cfg_dir_rootfs/boot"
-    fi
+    for f in MLO u-boot.img u-boot.bin; do
+        if [ -f "$f" ]; then
+            $cmd_cp "$f" "$cfg_dir_rootfs/boot"
+        fi
+    done
 }

rules/util-linux/host.bash

@@ -8,6 +8,7 @@ requires=\
 configure()
 {
     cd "$pkg_build_dir" &&
+    CFLAGS="-I$cfg_dir_toolchain/include" \
     "../util-linux-$version/configure" \
         --prefix="$cfg_dir_toolchain" \
         --disable-wall \

rules/uv4l/default.bash

@@ -0,0 +1,41 @@
+version=\
+(
+  "1.0.0"
+)
+
+url=\
+(
+  "http://lsts.pt/glued/uv4l.$version.tar.bz2"
+)
+
+md5=\
+(
+  "869e884accbfa9c2356e2fd9307dd71c"
+)
+
+maintainer=\
+(
+    'Pedro Gonçalves <pedro@lsts.pt>'
+)
+
+post_unpack()
+{
+    mv "../etc" "../uv4l-$version/"
+    mv "../usr" "../uv4l-$version/"
+}
+
+host_install()
+{
+  $cmd_cp -r "usr/lib/"*    "$cfg_dir_toolchain_sysroot/usr/lib/"
+  $cmd_cp -r "usr/include/"* "$cfg_dir_toolchain_sysroot/usr/include/"
+}
+
+target_install()
+{
+    $cmd_cp -r "usr/lib/"* "$cfg_dir_rootfs/usr/lib/"
+    $cmd_cp -r "usr/bin/"* "$cfg_dir_rootfs/usr/bin/"
+
+    tar -C "$pkg_dir/fs" -c -f - . | tar -C "$cfg_dir_rootfs" -x -v -f -
+}
+
+

rules/uv4l/fs/etc/rc.d/raspicam

@@ -0,0 +1,28 @@
+start()
+{
+    killall uv4l
+    modprobe cuse &&
+	uv4l \
+	    -nopreview \
+	    --auto-video_nr \
+	    --driver raspicam \
+	    --encoding h264 \
+	    --width 1080 \
+	    --height 720 \
+	    --framerate 20 \
+	    --quality 10 \
+	    --server-option \
+	    --port=9090 \
+	    --server-option \
+	    --max-queued-connections=30 \
+	    --server-option \
+	    --max-streams=25 \
+	    --server-option \
+	    --max-threads=29
+}
+
+stop()
+{
+    killall uv4l
+    rmmod uv4l
+}

systems/lauv-aux-rpi/config

@@ -6,13 +6,12 @@ cfg_services1='lauv-storage-server'
 cfg_services2='dune'
 cfg_packages='dropbear rsync busybox e2fsprogs dosfstools ptpd rpcbind nfs-utils rpi-boot-firmware linux/rpi'
 cfg_target_linux_kernel='arch/arm/boot/zImage'
-cfg_target_linux_dtb='arch/arm/boot/dts/bcm2709-rpi-2-b.dtb'
 cfg_ptpd_interface='eth0'
 cfg_terminal='ttyAMA0'
 cfg_lauv_storage_dir='/opt/lsts/dune/log'
 cfg_partitions=\
 (
-    rpi-boot boot0  512B    32MiB
+    rpi-boot BOOT0  512B    32MiB
     root     root0  32MiB   544MiB
     data     data0  544MiB  -1
 )

systems/lauv-aux-rpi/fs/boot/config.txt

@@ -0,0 +1,9 @@
+# Core.
+arm_freq=1000
+
+# Disable BT on Rpi3.
+dtoverlay=pi3-disable-bt
+
+# Enable RasPicam
+start_x=1
+gpu_mem=128

systems/lauv-aux-rpi/lauv-arpao-aux.cfg

@@ -0,0 +1,2 @@
+cfg_hostname='lauv-arpao-aux'
+cfg_eth_ext_ip='10.0.10.63'

systems/lauv-aux-rpi/lauv-aux-rpi-testbed.cfg

@@ -3,3 +3,4 @@ cfg_eth_ext_ip='10.0.200.24'
 cfg_eth_ext_mk='255.255.0.0'
 cfg_eth_ext_gw='10.0.0.1'
 cfg_ptpd_interface='eth0'
+cfg_services1=''

systems/lauv-aux-rpi/lauv-xtreme-2-aux.cfg

@@ -3,5 +3,3 @@ cfg_eth_ext_ip='10.0.10.53'
 cfg_eth_ext_mk='255.255.0.0'
 cfg_eth_ext_gw='10.0.0.1'
 cfg_ptpd_interface='eth0'
-cfg_lauv_storage='internal'
-cfg_packages="$cfg_packages necsave"

systems/lauv-aux-rpi/necsave-aux.cfg

@@ -1,9 +0,0 @@
-cfg_hostname='lauv-xplore-2-aux'
-cfg_eth_ext_ip='10.0.10.183'
-cfg_eth_ext_mk='255.255.0.0'
-cfg_eth_ext_gw='10.0.0.1'
-cfg_ptpd_interface='eth0'
-cfg_services0='network dropbear storage upgrade syslog ptpd'
-cfg_services1=''
-cfg_services2='trex'
-cfg_packages='dropbear rsync busybox e2fsprogs dosfstools ptpd rpcbind nfs-utils rpi-boot-firmware linux/rpi libantlr3c jansson zeromq czmq boost europa'

systems/lctr-a6xx/caravela.cfg

@@ -1,2 +1,4 @@
 cfg_hostname='caravela'
 cfg_eth_ext_ip='10.0.10.40'
+cfg_packages="$cfg_packages ppp iptables"
+cfg_modules="$cfg_modules ftdi_sio"

systems/lctr-a6xx/cfg/linux-3.14.63.cfg

@@ -136,7 +136,7 @@ CONFIG_HAVE_PCSPKR_PLATFORM=y
 CONFIG_EXPERT=y
 # CONFIG_UID16 is not set
 # CONFIG_SYSCTL_SYSCALL is not set
-# CONFIG_KALLSYMS is not set
+CONFIG_KALLSYMS=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
@@ -1529,7 +1529,7 @@ CONFIG_USB_SERIAL_GENERIC=y
 # CONFIG_USB_SERIAL_CP210X is not set
 # CONFIG_USB_SERIAL_CYPRESS_M8 is not set
 # CONFIG_USB_SERIAL_EMPEG is not set
-CONFIG_USB_SERIAL_FTDI_SIO=y
+CONFIG_USB_SERIAL_FTDI_SIO=m
 # CONFIG_USB_SERIAL_VISOR is not set
 # CONFIG_USB_SERIAL_IPAQ is not set
 # CONFIG_USB_SERIAL_IR is not set
@@ -1900,7 +1900,7 @@ CONFIG_DEFAULT_MESSAGE_LOGLEVEL=4
 #
 # Compile-time checks and compiler options
 #
-# CONFIG_DEBUG_INFO is not set
+CONFIG_DEBUG_INFO=y
 # CONFIG_ENABLE_WARN_DEPRECATED is not set
 # CONFIG_ENABLE_MUST_CHECK is not set
 CONFIG_FRAME_WARN=2048
@@ -2209,4 +2209,3 @@ CONFIG_ARCH_HAS_ATOMIC64_DEC_IF_POSITIVE=y
 # CONFIG_AVERAGE is not set
 # CONFIG_CORDIC is not set
 # CONFIG_DDR is not set
-

systems/lctr-a6xx/config

@@ -12,5 +12,5 @@ cfg_ptpd_interface='eth0'
 cfg_eth_ext_mk='255.255.0.0'
 cfg_eth_ext_gw='10.0.0.1'
 cfg_eth_prv_ip='192.168.0.1'
-cfg_escc_script='/etc/escc/hg1700.sh'
+cfg_escc_script=''
 cfg_kernel_extra_args='panic=5 quiet'

systems/lctr-a6xx/lauv-arpao.cfg

@@ -0,0 +1,2 @@
+cfg_hostname='lauv-arpao'
+cfg_eth_ext_ip='10.0.10.60'

systems/lctr-a6xx/lauv-xplore-1.cfg

@@ -1,2 +1,3 @@
 cfg_hostname='lauv-xplore-1'
 cfg_eth_ext_ip='10.0.10.120'
+cfg_modules="$cfg_modules ftdi_sio"

systems/lctr-a6xx/lauv-xplore-2.cfg

@@ -1,4 +1,2 @@
 cfg_hostname='lauv-xplore-2'
 cfg_eth_ext_ip='10.0.10.130'
-cfg_packages="$cfg_packages necsave"
-

systems/lctr-a6xx/lauv-xtreme-2.cfg

@@ -1,3 +1,9 @@
 cfg_hostname='lauv-xtreme-2'
 cfg_eth_ext_ip='10.0.10.50'
+cfg_packages="$cfg_packages rpcbind nfs-utils"
+cfg_services1='lauv-storage-client'
+cfg_lauv_storage_host='10.0.10.53'
+cfg_lauv_storage_paths='/opt/lsts/dune/log'
+cfg_lauv_storage_timeout=60
 cfg_escc_script='/etc/escc/hg1700-psimar.sh'
+cfg_dune_i18n='C'

systems/lctr-a6xx/patches/linux/4.4.66/00-aim104-com8.patch

@@ -0,0 +1,85 @@
+diff -Nru a/drivers/tty/serial/8250/8250_aim104_com8.c b/drivers/tty/serial/8250/8250_aim104_com8.c
+--- a/drivers/tty/serial/8250/8250_aim104_com8.c
++++ b/drivers/tty/serial/8250/8250_aim104_com8.c
+@@ -0,0 +1,51 @@
++#include <linux/module.h>
++#include <linux/init.h>
++#include <linux/serial_8250.h>
++
++#define PORT(_base,_irq)				\
++	{						\
++		.iobase		= _base,		\
++		.irq		= _irq,			\
++		.uartclk	= 1843200,		\
++		.iotype		= UPIO_PORT,		\
++		.flags		= UPF_BOOT_AUTOCONF | UPF_BUGGY_UART,	\
++	}
++
++static struct plat_serial8250_port aim104_data[] = {
++	PORT(0x100, 10),
++	PORT(0x108, 10),
++	PORT(0x110, 10),
++	PORT(0x118, 10),
++	PORT(0x120, 10),
++	PORT(0x128, 10),
++	PORT(0x130, 10),
++	PORT(0x138, 10),
++	PORT(0x300, 6),
++	PORT(0x308, 6),
++	PORT(0x310, 6),
++	PORT(0x318, 6),
++	PORT(0x320, 6),
++	PORT(0x328, 6),
++	PORT(0x330, 6),
++	PORT(0x338, 6),
++	{ },
++};
++
++static struct platform_device exar_device = {
++	.name			= "serial8250",
++	.id			= PLAT8250_DEV_PLATFORM,
++	.dev			= {
++		.platform_data	= aim104_data,
++	},
++};
++
++static int __init exar_init(void)
++{
++	return platform_device_register(&exar_device);
++}
++
++module_init(exar_init);
++
++MODULE_AUTHOR("Ricardo Martins");
++MODULE_DESCRIPTION("8250 serial probe module for Eurotech AIM104-COM8");
++MODULE_LICENSE("GPL");
+diff -Nru a/drivers/tty/serial/8250/Kconfig b/drivers/tty/serial/8250/Kconfig
+--- a/drivers/tty/serial/8250/Kconfig
++++ b/drivers/tty/serial/8250/Kconfig
+@@ -225,6 +225,15 @@ config SERIAL_8250_EXAR_ST16C554
+ 	  To compile this driver as a module, choose M here: the module
+ 	  will be called 8250_exar_st16c554.
+
++config SERIAL_8250_AIM104_COM8
++	tristate "Support Eurotech AIM104-COM8 Dual Quad UART"
++	depends on SERIAL_8250 != n && ISA && SERIAL_8250_MANY_PORTS
++	help
++	  Eurotech AIM104-COM8 Dual Quad UART.
++
++	  To compile this driver as a module, choose M here: the module
++	  will be called 8250_aim104_com8.
++
+ config SERIAL_8250_HUB6
+ 	tristate "Support Hub6 cards"
+ 	depends on SERIAL_8250 != n && ISA && SERIAL_8250_MANY_PORTS
+diff -Nru a/drivers/tty/serial/8250/Makefile b/drivers/tty/serial/8250/Makefile
+--- a/drivers/tty/serial/8250/Makefile
++++ b/drivers/tty/serial/8250/Makefile
+@@ -17,6 +17,7 @@ obj-$(CONFIG_SERIAL_8250_FOURPORT)	+= 8250_fourport.o
+ obj-$(CONFIG_SERIAL_8250_ACCENT)	+= 8250_accent.o
+ obj-$(CONFIG_SERIAL_8250_BOCA)		+= 8250_boca.o
+ obj-$(CONFIG_SERIAL_8250_EXAR_ST16C554)	+= 8250_exar_st16c554.o
++obj-$(CONFIG_SERIAL_8250_AIM104_COM8)	+= 8250_aim104_com8.o
+ obj-$(CONFIG_SERIAL_8250_HUB6)		+= 8250_hub6.o
+ obj-$(CONFIG_SERIAL_8250_MCA)		+= 8250_mca.o
+ obj-$(CONFIG_SERIAL_8250_FSL)		+= 8250_fsl.o

systems/lctr-a6xx/patches/linux/4.4.66/90-st16654-fifo-trigger-16.patch

@@ -0,0 +1,14 @@
+diff --git a/drivers/tty/serial/8250/8250_port.c b/drivers/tty/serial/8250/8250_port.c
+index 52d82d2..613c7e9 100644
+--- a/drivers/tty/serial/8250/8250_port.c
++++ b/drivers/tty/serial/8250/8250_port.c
+@@ -132,8 +132,7 @@ static const struct serial8250_config uart_config[] = {
+ 		.name		= "ST16654",
+ 		.fifo_size	= 64,
+ 		.tx_loadsz	= 32,
+-		.fcr		= UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_01 |
+-				  UART_FCR_T_TRIG_10,
++		.fcr		= UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_00,
+ 		.rxtrig_bytes	= {8, 16, 56, 60},
+ 		.flags		= UART_CAP_FIFO | UART_CAP_EFR | UART_CAP_SLEEP,
+ 	},

systems/lctr-a8xx/lauv-xtreme-2-doam.cfg

@@ -1,3 +0,0 @@
-cfg_hostname='lauv-xtreme-2-doam'
-cfg_eth_ext_ip='10.0.10.53'
-cfg_kernel_boot_dev='/dev/sda1'

systems/lctr-a8xx/lauv-xtreme-2-trex.cfg

@@ -1,5 +0,0 @@
-cfg_packages='dropbear rsync busybox e2fsprogs libjpeg-turbo ptpd linux syslinux syslinux/host bzip2 libantlr3c boost europa'
-cfg_hostname='lauv-xtreme-2-doam'
-cfg_eth_ext_ip='10.0.10.52'
-cfg_kernel_boot_dev='/dev/sda1'
-cfg_services2='dune trex'

systems/lctr-a9xx/config

@@ -4,7 +4,7 @@ cfg_modules=''
 cfg_services0='dropbear network storage upgrade syslog'
 cfg_services1='huawei ntpd'
 cfg_services2='dune'
-cfg_packages='u-boot dropbear rsync busybox linux uswitch ppp iptables socat bridge-utils ntp e2fsprogs i2c-tools iperf dnsmasq'
+cfg_packages='u-boot dropbear rsync busybox linux/v3_14 uswitch ppp iptables socat bridge-utils ntp e2fsprogs i2c-tools iperf dnsmasq'
 cfg_target_linux_kernel='arch/arm/boot/zImage'
 cfg_target_linux_dtb='arch/arm/boot/dts/omap3-lctr-a9xx.dtb'
 cfg_target_uboot_config='igep0020'

systems/lctr-a9xx/patches/linux/4.4.66/00-lctr-a9xx-dts.patch

@@ -0,0 +1,105 @@
+diff --git linux-4.4.66/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
+index 30bbc37..7241be6 100644
+--- linux-4.4.66/arch/arm/boot/dts/Makefile
++++ linux-4.4.66/arch/arm/boot/dts/Makefile
+@@ -421,6 +421,7 @@
+	omap3-igep0020-rev-f.dtb \
+	omap3-igep0030.dtb \
+	omap3-igep0030-rev-g.dtb \
++	omap3-lctr-a9xx.dtb \
+	omap3-ldp.dtb \
+	omap3-lilly-dbb056.dtb \
+	omap3-n900.dtb \
+diff -Nru linux-4.4.66/arch/arm/boot/dts/omap3-lctr-a9xx.dts linux-4.4.66.rasm/arch/arm/boot/dts/omap3-lctr-a9xx.dts
+--- linux-4.4.66/arch/arm/boot/dts/omap3-lctr-a9xx.dts
++++ linux-4.4.66.rasm/arch/arm/boot/dts/omap3-lctr-a9xx.dts
+@@ -0,0 +1,89 @@
++/*
++ * Copyright (C) 2014 Universidade do Porto - Faculdade de Engenharia
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as
++ * published by the Free Software Foundation.
++ */
++
++#include <dt-bindings/input/input.h>
++#include "omap3-igep0020.dts"
++
++/ {
++	leds {
++		boot {
++			linux,default-trigger = "heartbeat";
++		};
++	};
++
++	gpio_keys {
++		pinctrl-names = "default";
++		pinctrl-0 = <&gpio_keys_pins>;
++		compatible = "gpio-keys";
++
++		button@0 {
++			label = "Button 0";
++			gpios = <&gpio5 11 GPIO_ACTIVE_HIGH>;	/* gpio_139 */
++			linux,code = <BTN_0>;
++			debounce-interval = <5>;
++		};
++
++		button@1 {
++			label = "Button 1";
++			gpios = <&gpio5 10 GPIO_ACTIVE_HIGH>;	/* gpio_138 */
++			linux,code = <BTN_1>;
++			debounce-interval = <5>;
++		};
++
++		button@2 {
++			label = "Button 2";
++			gpios = <&gpio5 9 GPIO_ACTIVE_HIGH>;	/* gpio_137 */
++			linux,code = <BTN_2>;
++			debounce-interval = <5>;
++		};
++	};
++
++	pps {
++		compatible = "pps-gpio";
++		pinctrl-names = "default";
++		pinctrl-0 = <&pps_pins>;
++		gpios = <&gpio5 8 GPIO_ACTIVE_HIGH>;
++		assert-rising-edge;
++	};
++};
++
++&omap3_pmx_core {
++	gpio_keys_pins: pinmux_gpio_keys_pins {
++		pinctrl-single,pins = <
++			0x136 (PIN_INPUT_PULLDOWN | MUX_MODE4)	/* gpio_137 - button 2 */
++			0x138 (PIN_INPUT_PULLDOWN | MUX_MODE4)	/* gpio_138 - button 1 */
++			0x13a (PIN_INPUT_PULLDOWN | MUX_MODE4)	/* gpio_139 - button 0 */
++		>;
++	};
++
++	pps_pins: pinmux_pps_pins {
++		pinctrl-single,pins = <
++			0x134 (PIN_INPUT_PULLDOWN | MUX_MODE4)	/* gpio_136 */
++		>;
++	};
++};
++
++&i2c2 {
++	rtc@68 {
++		compatible = "dallas,ds1307";
++		reg = <0x68>;
++	};
++};
++
++/* Disable WiFi/Bluetooth combo. */
++&mmc2 {
++	status = "disabled";
++};
++
++&vdd33 {
++	status = "disabled";
++};
++
++&lbee1usjyc_pdn {
++	status = "disabled";
++};

systems/lctr-a9xx/x8-00.cfg

@@ -1,2 +0,0 @@
-cfg_hostname='x8-00'
-cfg_eth_ext_ip='10.0.20.95'

systems/lctr-a9xx/x8-02.cfg

@@ -1,3 +1,3 @@
 cfg_hostname='x8-02'
-cfg_eth_ext_ip='10.0.20.105'
-cfg_packages='u-boot dropbear rsync busybox linux uswitch ppp iptables socat bridge-utils ntp e2fsprogs i2c-tools iperf dnsmasq libav'
+cfg_eth_ext_ip='10.0.20.100'
+cfg_packages='u-boot dropbear rsync busybox linux/v3_14 uswitch ppp iptables socat bridge-utils ntp e2fsprogs i2c-tools iperf dnsmasq libav'

systems/lctr-b2xx/aero-01.cfg

@@ -1,6 +1,6 @@
 cfg_hostname='aero-01'
 cfg_storage='data0:ext4:/opt'
-cfg_eth_ext_ip='10.0.20.120'
+cfg_eth_ext_ip='10.0.20.80'
 cfg_eth_ext_mk='255.255.0.0'
 cfg_eth_ext_gw='10.0.0.1'
 cfg_packages='u-boot dropbear rsync busybox e2fsprogs ptpd i2c-tools am33xx-cm3/host linux libav'

systems/lctr-b2xx/lauv-noptilus-1-aux.cfg

@@ -1,7 +1,7 @@
 cfg_hostname='lauv-noptilus-1-aux'
-cfg_storage='data0:ext4:/opt'
+cfg_storage='data0:ext4:/opt data1:ext4:/opt/lsts/dune/log'
 cfg_eth_ext_ip='10.0.10.83'
 cfg_eth_ext_mk='255.255.0.0'
 cfg_eth_ext_gw='10.0.0.1'
 cfg_ptpd_interface='eth0'
-cfg_packages="$cfg_packages necsave"
+cfg_packages="$cfg_packages boost jansson czmq zeromq lpg"

systems/lctr-b2xx/lauv-noptilus-2-aux.cfg

@@ -1,7 +1,7 @@
 cfg_hostname='lauv-noptilus-2-aux'
-cfg_storage='data0:ext4:/opt'
+cfg_storage='data0:ext4:/opt data1:ext4:/opt/lsts/dune/log'
 cfg_eth_ext_ip='10.0.10.93'
 cfg_eth_ext_mk='255.255.0.0'
 cfg_eth_ext_gw='10.0.0.1'
 cfg_ptpd_interface='eth0'
-cfg_packages="$cfg_packages necsave"
+cfg_packages="$cfg_packages boost jansson czmq zeromq lpg"

systems/lctr-b2xx/lauv-noptilus-3-aux.cfg

@@ -4,4 +4,4 @@ cfg_eth_ext_ip='10.0.10.103'
 cfg_eth_ext_mk='255.255.0.0'
 cfg_eth_ext_gw='10.0.0.1'
 cfg_ptpd_interface='eth0'
-cfg_packages="$cfg_packages necsave"
+cfg_packages="$cfg_packages boost jansson czmq zeromq lpg"

systems/lctr-b2xx/ntnu-x8-008.cfg

@@ -1,9 +0,0 @@
-# ntnu-x8-00x
-# Adds libav package. 
-cfg_hostname='ntnu-x8-008'
-cfg_eth_ext_ip='192.168.1.135'
-cfg_eth_ext_mk='255.255.255.0'
-cfg_eth_ext_gw='192.168.1.1'
-cfg_ptpd_interface='eth0'
-cfg_target_linux_dtb='arch/arm/boot/dts/am335x-lctr-b2xx-ntnu-gpio.dtb'
-cfg_packages='u-boot dropbear rsync busybox e2fsprogs ptpd i2c-tools am33xx-cm3/host linux libav libswiftnav'

systems/lctr-b2xx/patches/linux/3.14.63/01-lctr-b2xx-dts.patch

@@ -0,0 +1,31 @@
+diff -Nru linux-3.14.63/arch/arm/boot/dts/am335x-lctr-b2xx.dts linux-3.14.63.mc/arch/arm/boot/dts/am335x-lctr-b2xx.dts
+--- linux-3.14.63/arch/arm/boot/dts/am335x-lctr-b2xx.dts	2017-01-17 14:12:07.019022866 +0000
++++ linux-3.14.63.mc/arch/arm/boot/dts/am335x-lctr-b2xx.dts	2017-01-17 14:26:45.657383756 +0000
+@@ -60,6 +60,16 @@
+ 			0x154 (PIN_OUTPUT_PULLDOWN | MUX_MODE1)
+ 		>;
+ 	};
++
++	/* UART4. */
++	uart4_pins: pinmux_uart4_pins {
++		pinctrl-single,pins = <
++			/* uart4_rxd */
++			0x70 (PIN_INPUT_PULLUP | MUX_MODE6)
++			/* uart4_txd */
++			0x74 (PIN_OUTPUT_PULLDOWN | MUX_MODE6)
++		>;
++	};
+ };
+ 
+ /* Enable UART1. */
+@@ -75,3 +85,10 @@
+ 	pinctrl-0 = <&uart2_pins>;
+ 	status = "okay";
+ };
++
++/* Enable UART4. */
++&uart4 {
++	pinctrl-names = "default";
++	pinctrl-0 = <&uart4_pins>;
++	status = "okay";
++};

systems/lctr-b2xx/pixhawk-testbed.cfg

@@ -1,6 +1,6 @@
-cfg_hostname='mariner-01'
+cfg_hostname='pixhawk-testbed'
 cfg_storage='data0:ext4:/opt'
-cfg_eth_ext_ip='10.0.20.125'
+cfg_eth_ext_ip='10.0.200.50'
 cfg_eth_ext_mk='255.255.0.0'
 cfg_eth_ext_gw='10.0.0.1'
 cfg_packages='u-boot dropbear rsync busybox e2fsprogs ptpd i2c-tools am33xx-cm3/host linux libav'

systems/lctr-b2xx/x8-06.cfg

@@ -1,6 +1,6 @@
 cfg_hostname='x8-06'
 cfg_storage='data0:ext4:/opt'
-cfg_eth_ext_ip='10.0.20.115'
+cfg_eth_ext_ip='10.0.20.105'
 cfg_eth_ext_mk='255.255.0.0'
 cfg_eth_ext_gw='10.0.0.1'
-cfg_packages='u-boot dropbear rsync busybox e2fsprogs ptpd i2c-tools am33xx-cm3/host linux libav'
+cfg_packages='u-boot dropbear rsync busybox e2fsprogs ptpd i2c-tools am33xx-cm3/host linux opencv exiv2 libav'

systems/lctr-b2xx/x8-07.cfg

@@ -1,6 +1,7 @@
-cfg_hostname='x8-05'
+cfg_hostname='x8-07'
 cfg_storage='data0:ext4:/opt'
 cfg_eth_ext_ip='10.0.20.110'
 cfg_eth_ext_mk='255.255.0.0'
 cfg_eth_ext_gw='10.0.0.1'
-cfg_packages='u-boot dropbear rsync busybox e2fsprogs ptpd i2c-tools am33xx-cm3/host linux libav'
+cfg_services1='huawei'
+cfg_packages='u-boot dropbear rsync busybox e2fsprogs ptpd i2c-tools uswitch ppp iptables am33xx-cm3/host linux opencv exiv2 libav'

systems/lctr-rpi/config

@@ -0,0 +1,17 @@
+cfg_architecture='cortex-a8-hardfp'
+cfg_storage='data0:ext4:/opt'
+cfg_modules=''
+cfg_services0='network dropbear storage upgrade syslog ptpd'
+cfg_services2='dune'
+cfg_packages='dropbear rsync busybox e2fsprogs dosfstools ptpd rpcbind rpi-boot-firmware linux/rpi'
+cfg_target_linux_kernel='arch/arm/boot/zImage'
+cfg_ptpd_interface='eth0'
+cfg_eth_ext_mk='255.255.0.0'
+cfg_eth_ext_gw='10.0.0.1'
+cfg_terminal='tty1'
+cfg_partitions=\
+(
+    rpi-boot BOOT0  512B    32MiB
+    root     root0  32MiB   544MiB
+    data     data0  544MiB  -1
+)

systems/lctr-rpi/fs/boot/config.txt

@@ -0,0 +1,9 @@
+# Core.
+arm_freq=1000
+
+# Disable BT on Rpi3.
+dtoverlay=pi3-disable-bt
+
+# Enable RasPicam
+start_x=1
+gpu_mem=128

systems/lctr-rpi/fs/etc/inittab

@@ -0,0 +1,4 @@
+::sysinit:/sbin/services sysinit
+::restart:/sbin/init
+::respawn:-/usr/sbin/dropbear -F
+::shutdown:/sbin/services syshalt

systems/lctr-rpi/fs/etc/mdev.conf

@@ -0,0 +1,2 @@
+ttyAMA0         root:root  660  >terminal
+ttyUSB[0-9]*    root:root  660  */sbin/mdev-ttyusb

systems/lctr-rpi/mariner-01.cfg

@@ -0,0 +1,6 @@
+cfg_hostname='mariner-01'
+cfg_eth_ext_ip='10.0.20.125'
+cfg_packages="$cfg_packages opencv raspicam exiv2 libav iw"
+cfg_modules="$cfg_modules ftdi_sio rt73usb"
+cfg_services0='network-wlan dropbear storage upgrade syslog ptpd check_wlan'
+cfg_ptpd_interface='wlan0'

systems/lctr-rpi/nest-1.cfg

@@ -0,0 +1,4 @@
+cfg_hostname='nest-1'
+cfg_eth_ext_ip='10.0.35.1'
+cfg_services1='huawei'
+cfg_packages="$cfg_packages ppp iptables"

systems/lctr-rpi/test-rpi.cfg

@@ -0,0 +1,9 @@
+cfg_hostname='test-rpi'
+cfg_eth_ext_ip='10.0.200.52'
+cfg_services1=''
+cfg_packages='dropbear rsync busybox e2fsprogs dosfstools ptpd rpcbind rpi-boot-firmware linux/rpi raspicam libjpeg-turbo v4l-utils uv4l iw'
+cfg_services0='network-wlan dropbear storage upgrade syslog ptpd check_wlan'
+cfg_modules="$cfg_modules ftdi_sio rt73usb"
+cfg_terminal='tty1'
+cfg_ptpd_interface='wlan0'
+

systems/lctr-rpi/x2o-01.cfg

@@ -0,0 +1,4 @@
+cfg_hostname='x2o-01'
+cfg_eth_ext_ip='10.0.20.140'
+cfg_packages="$cfg_packages raspicam libjpeg-turbo v4l-utils uv4l libav"
+cfg_modules="$cfg_modules ftdi_sio"

systems/lctr-rpi/x2o-02.cfg

@@ -0,0 +1,4 @@
+cfg_hostname='x2o-02'
+cfg_eth_ext_ip='10.0.20.145'
+cfg_packages="$cfg_packages raspicam libjpeg-turbo v4l-utils uv4l libav"
+cfg_modules="$cfg_modules ftdi_sio"

systems/lctr-rpi/x8-08.cfg

@@ -0,0 +1,5 @@
+cfg_hostname='x8-08'
+cfg_eth_ext_ip='10.0.20.115'
+cfg_services1='huawei'
+cfg_packages="$cfg_packages opencv raspicam exiv2 libav uswitch"
+cfg_modules="$cfg_modules ftdi_sio"

systems/ntnu-b2xx/cfg/linux-3.14.63.cfg

@@ -2622,3 +2622,8 @@ CONFIG_CLZ_TAB=y
 CONFIG_MPILIB=m
 CONFIG_OID_REGISTRY=m
 CONFIG_VIRTUALIZATION=y
+
+CONFIG_RFKILL=y
+CONFIG_CFG80211=y
+CONFIG_NL80211=y
+CONFIG_RT2800USB=y

systems/ntnu-b2xx/cfg/linux-3.14.64-rt67.cfg

@@ -463,6 +463,8 @@ CONFIG_ARCH_NR_GPIO=0
 # CONFIG_PREEMPT_VOLUNTARY is not set
 CONFIG_PREEMPT=y
 CONFIG_PREEMPT_COUNT=y
+CONFIG_PREEMPT_RT_FULL=y
+CONFIG_PREEMPT_RT_BASE=y
 CONFIG_HZ_FIXED=0
 # CONFIG_HZ_100 is not set
 # CONFIG_HZ_200 is not set
@@ -1963,7 +1965,7 @@ CONFIG_RTC_INTF_DEV=y
 #
 # I2C RTC drivers
 #
-# CONFIG_RTC_DRV_DS1307 is not set
+CONFIG_RTC_DRV_DS1307=y
 # CONFIG_RTC_DRV_DS1374 is not set
 # CONFIG_RTC_DRV_DS1672 is not set
 # CONFIG_RTC_DRV_DS3232 is not set

systems/ntnu-b2xx/config

@@ -1,11 +1,11 @@
-cfg_architecture='cortex-a8'
+cfg_architecture='cortex-a8-hardfp'
 cfg_storage='data0:ext4:/opt'
 cfg_modules=''
 cfg_services0='network dropbear storage upgrade syslog ptpd'
 cfg_services2='dune'
 cfg_packages='u-boot dropbear rsync busybox e2fsprogs ptpd i2c-tools am33xx-cm3/host linux'
 cfg_target_linux_kernel='arch/arm/boot/zImage'
-cfg_target_linux_dtb='arch/arm/boot/dts/am335x-lctr-b2xx.dtb'
+cfg_target_linux_dtb='arch/arm/boot/dts/am335x-ntnu-b2xx.dtb'
 cfg_target_uboot_config='am335x_bbb'
 cfg_ptpd_interface='eth0'
 cfg_terminal='ttyO0'

systems/ntnu-b2xx/fs/etc/rc.d/rtklib_rtkrcv

@@ -1,6 +1,39 @@
 start()
 {
-    (cd /opt/lsts/rtklib/ && exec rtkrcv -s -o /etc/rtklib/conf/rtkrcv.conf -d /tmp/ttyC0 < /dev/null > /opt/lsts/rtklib/startlog.log 2>&1 &)
+    if [ ! -d "/opt/lsts/rtklib/" ]; then
+      mkdir /opt/lsts/rtklib
+    fi
+
+    localBackupPath="/opt/lsts/rtklib/rtklib_cmdfile.cmd"
+    cfgPath="/etc/rtklib/conf/rtkrcv.conf"
+    cfgPathUse="/opt/lsts/rtklib/conf_use.conf"
+    # First, try to get the configuration
+    cmdFile=`wget -q -O -  10.0.60.51:8080/rtklib_cmdfile.cmd`
+    res=$?
+
+    if [ $res -ne 0 ]; then
+        #echo "Could not find file. Trying to read backup."
+        
+        if [ -f $localBackupPath ]; then
+            echo "Error connecting to server. Reading from backup path."
+            cmdFile=`cat ${localBackupPath}`
+        else
+            echo "Error connecting to server. No local backup file. Using default. "
+            cmdFile="GPS_5Hz.cmd"
+        fi  
+    fi
+
+    echo "Using cmd file: ${cmdFile}"
+    #echo "Storing in last used file. "
+    echo ${cmdFile} > ${localBackupPath}
+
+    cfgFileContent=`cat ${cfgPath}`
+
+    cp ${cfgPath} ${cfgPathUse}
+
+    echo "file-cmdfile1 =/etc/rtklib/cmd/${cmdFile}" >> ${cfgPathUse}   
+
+    (cd /opt/lsts/rtklib/ && exec rtkrcv -s -o ${cfgPathUse} -d /tmp/ttyC0 < /dev/null > /opt/lsts/rtklib/startlog.log 2>&1 &)
 }
 
 stop()

systems/ntnu-b2xx/fs/etc/rc.d/rtklib_single

@@ -0,0 +1,27 @@
+start()
+{
+    (cd /opt/lsts/rtklib/ && exec rtkrcv -s -o /etc/rtklib/conf/rtkrcv_single.conf -d /tmp/ttyC0 < /dev/null > /opt/lsts/rtklib/startlog.log 2>&1 &)
+}
+
+stop()
+{
+        while [ 1 ]; do
+        echo "* Stopping process..."        
+        killall rtkrcv > /dev/null 2>&1
+
+       
+        for r in 0 1 2 3 4 5 6 7 8 9; do
+            if [ -n "$(pidof rtkrcv)" ]; then
+                echo "* Waiting for process to exit ($r)..."
+                sleep 1
+            else
+                echo "* Process not running."
+                return 1
+            fi
+        done
+
+        echo "* Forcing exit..."
+        killall -9 rtkrcv > /dev/null 2>&1
+        sleep 1
+    done
+}

systems/ntnu-b2xx/fs/etc/rc.d/rtklib_str2str

@@ -1,6 +1,20 @@
 start()
 {
-    str2str -in serial://uart/2:9600:8:n:1:off -c /etc/rtklib/data/ubx_raw_10hz.cmd -out tcpsvr://:50022 < /dev/null > /dev/null 2>&1 &
+   cmdFilePath="/opt/lsts/dune/www/rtklib_cmdfile.cmd"
+    
+    # Exists?
+    if [ ! -f ${cmdFilePath} ]; then
+        echo "No commandfile found. Creating default."        
+        echo "GPS_5Hz.cmd" >> ${cmdFilePath}
+    fi            
+            
+    cmdFile=$(<${cmdFilePath})
+    cmdFile=`cat ${cmdFilePath}`
+    echo "Starting str2str server with command file: ${cmdFile}"
+    
+    str2str -in serial://uart/2:115200:8:n:1:off -c /etc/rtklib/cmd/${cmdFile} -out tcpsvr://:50022 < /dev/null > /dev/null 2>&1 &    
+
+
 }
 
 stop()

systems/ntnu-b2xx/fs/etc/rtklib/cmd/GPS_10Hz.cmd

@@ -0,0 +1,59 @@
+# Based on files from the REACH project (https://github.com/emlid/ReachView/tree/master/rtklib_configs)
+# navigation data update rate 1Hz in ms
+!UBX CFG-RATE 100 1 1
+
+# turn on UBX RXM-RAWX messages on first(UART) interface with the same freq
+!UBX CFG-MSG 2 21 0 1 0 0 0 0
+# turn on UBX RXM-SFRBX messages on first(UART) interface with the same freq
+!UBX CFG-MSG 2 19 0 1 0 0 0 0
+# turn off UBX TIM TM2 messages on first(UART) interface with the same freq
+!UBX CFG-MSG 13 3 0 0 0 0 0 0
+
+# GNSS system settings
+# set GPS 8-16 channels
+!UBX CFG-GNSS 0 32 32 1 0 8 16 0 1 0 1 1
+
+# set SBAS 1-3 channels off
+!UBX CFG-GNSS 0 32 32 1 1 1 3 0 0 0 1 1
+
+# set Galileo 0 channels off
+!UBX CFG-GNSS 0 32 32 1 2 0 0 0 0 0 0 1
+
+# set BeiDou 8-16 channels off
+!UBX CFG-GNSS 0 32 32 1 3 8 16 0 0 0 1 1
+
+# set IMES 0-8 channels off
+!UBX CFG-GNSS 0 32 32 1 4 0 8 0 0 0 1 1
+
+# set QZSS 0-3 channels off
+!UBX CFG-GNSS 0 32 32 1 5 0 3 0 0 0 1 1
+
+# set GLONASS 8-14 channels off 
+!UBX CFG-GNSS 0 32 32 1 6 8 14 0 0 0 1 1
+
+# change NAV5 stationary mode to airborne <4g
+!UBX CFG-NAV5 1 8 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+
+# turn off extra messages default messages
+# NMEA GGA
+!UBX CFG-MSG 240 0 0 0 0 0 0 0
+# NMEA GLL
+!UBX CFG-MSG 240 1 0 0 0 0 0 0
+# NMEA GSA
+!UBX CFG-MSG 240 2 0 0 0 0 0 0
+# NMEA GSV
+!UBX CFG-MSG 240 3 0 0 0 0 0 0
+# NMEA RMC
+!UBX CFG-MSG 240 4 0 0 0 0 0 0
+# NMEA VTG
+!UBX CFG-MSG 240 5 0 0 0 0 0 0
+# NMEA ZDA
+!UBX CFG-MSG 240 8 0 0 0 0 0 0
+!UBX CFG-MSG 1 3 0 0 0 0 0 0
+!UBX CFG-MSG 1 3 0 0 0 0 0 0
+!UBX CFG-MSG 1 6 0 0 0 0 0 0
+!UBX CFG-MSG 1 18 0 0 0 0 0 0
+!UBX CFG-MSG 1 34 0 0 0 0 0 0
+!UBX CFG-MSG 1 48 0 0 0 0 0 0
+@
+!UBX CFG-RATE 1000 1 1

systems/ntnu-b2xx/fs/etc/rtklib/cmd/GPS_14Hz.cmd

@@ -0,0 +1,59 @@
+# Based on files from the REACH project (https://github.com/emlid/ReachView/tree/master/rtklib_configs)
+# navigation data update rate 1Hz in ms
+!UBX CFG-RATE 70 1 1
+
+# turn on UBX RXM-RAWX messages on first(UART) interface with the same freq
+!UBX CFG-MSG 2 21 0 1 0 0 0 0
+# turn on UBX RXM-SFRBX messages on first(UART) interface with the same freq
+!UBX CFG-MSG 2 19 0 1 0 0 0 0
+# turn off UBX TIM TM2 messages on first(UART) interface with the same freq
+!UBX CFG-MSG 13 3 0 0 0 0 0 0
+
+# GNSS system settings
+# set GPS 8-16 channels
+!UBX CFG-GNSS 0 32 32 1 0 8 16 0 1 0 1 1
+
+# set SBAS 1-3 channels off
+!UBX CFG-GNSS 0 32 32 1 1 1 3 0 0 0 1 1
+
+# set Galileo 0 channels off
+!UBX CFG-GNSS 0 32 32 1 2 0 0 0 0 0 0 1
+
+# set BeiDou 8-16 channels off
+!UBX CFG-GNSS 0 32 32 1 3 8 16 0 0 0 1 1
+
+# set IMES 0-8 channels off
+!UBX CFG-GNSS 0 32 32 1 4 0 8 0 0 0 1 1
+
+# set QZSS 0-3 channels off
+!UBX CFG-GNSS 0 32 32 1 5 0 3 0 0 0 1 1
+
+# set GLONASS 8-14 channels off 
+!UBX CFG-GNSS 0 32 32 1 6 8 14 0 0 0 1 1
+
+# change NAV5 stationary mode to airborne <4g
+!UBX CFG-NAV5 1 8 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+
+# turn off extra messages default messages
+# NMEA GGA
+!UBX CFG-MSG 240 0 0 0 0 0 0 0
+# NMEA GLL
+!UBX CFG-MSG 240 1 0 0 0 0 0 0
+# NMEA GSA
+!UBX CFG-MSG 240 2 0 0 0 0 0 0
+# NMEA GSV
+!UBX CFG-MSG 240 3 0 0 0 0 0 0
+# NMEA RMC
+!UBX CFG-MSG 240 4 0 0 0 0 0 0
+# NMEA VTG
+!UBX CFG-MSG 240 5 0 0 0 0 0 0
+# NMEA ZDA
+!UBX CFG-MSG 240 8 0 0 0 0 0 0
+!UBX CFG-MSG 1 3 0 0 0 0 0 0
+!UBX CFG-MSG 1 3 0 0 0 0 0 0
+!UBX CFG-MSG 1 6 0 0 0 0 0 0
+!UBX CFG-MSG 1 18 0 0 0 0 0 0
+!UBX CFG-MSG 1 34 0 0 0 0 0 0
+!UBX CFG-MSG 1 48 0 0 0 0 0 0
+@
+!UBX CFG-RATE 1000 1 1

systems/ntnu-b2xx/fs/etc/rtklib/cmd/GPS_5Hz.cmd

@@ -0,0 +1,59 @@
+# Based on files from the REACH project (https://github.com/emlid/ReachView/tree/master/rtklib_configs)
+# navigation data update rate 1Hz in ms
+!UBX CFG-RATE 200 1 1
+
+# turn on UBX RXM-RAWX messages on first(UART) interface with the same freq
+!UBX CFG-MSG 2 21 0 1 0 0 0 0
+# turn on UBX RXM-SFRBX messages on first(UART) interface with the same freq
+!UBX CFG-MSG 2 19 0 1 0 0 0 0
+# turn off UBX TIM TM2 messages on first(UART) interface with the same freq
+!UBX CFG-MSG 13 3 0 0 0 0 0 0
+
+# GNSS system settings
+# set GPS 8-16 channels
+!UBX CFG-GNSS 0 32 32 1 0 8 16 0 1 0 1 1
+
+# set SBAS 1-3 channels off
+!UBX CFG-GNSS 0 32 32 1 1 1 3 0 0 0 1 1
+
+# set Galileo 0 channels off
+!UBX CFG-GNSS 0 32 32 1 2 0 0 0 0 0 0 1
+
+# set BeiDou 8-16 channels off
+!UBX CFG-GNSS 0 32 32 1 3 8 16 0 0 0 1 1
+
+# set IMES 0-8 channels off
+!UBX CFG-GNSS 0 32 32 1 4 0 8 0 0 0 1 1
+
+# set QZSS 0-3 channels off
+!UBX CFG-GNSS 0 32 32 1 5 0 3 0 0 0 1 1
+
+# set GLONASS 8-14 channels off 
+!UBX CFG-GNSS 0 32 32 1 6 8 14 0 0 0 1 1
+
+# change NAV5 stationary mode to airborne <4g
+!UBX CFG-NAV5 1 8 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+
+# turn off extra messages default messages
+# NMEA GGA
+!UBX CFG-MSG 240 0 0 0 0 0 0 0
+# NMEA GLL
+!UBX CFG-MSG 240 1 0 0 0 0 0 0
+# NMEA GSA
+!UBX CFG-MSG 240 2 0 0 0 0 0 0
+# NMEA GSV
+!UBX CFG-MSG 240 3 0 0 0 0 0 0
+# NMEA RMC
+!UBX CFG-MSG 240 4 0 0 0 0 0 0
+# NMEA VTG
+!UBX CFG-MSG 240 5 0 0 0 0 0 0
+# NMEA ZDA
+!UBX CFG-MSG 240 8 0 0 0 0 0 0
+!UBX CFG-MSG 1 3 0 0 0 0 0 0
+!UBX CFG-MSG 1 3 0 0 0 0 0 0
+!UBX CFG-MSG 1 6 0 0 0 0 0 0
+!UBX CFG-MSG 1 18 0 0 0 0 0 0
+!UBX CFG-MSG 1 34 0 0 0 0 0 0
+!UBX CFG-MSG 1 48 0 0 0 0 0 0
+@
+!UBX CFG-RATE 1000 1 1