Compare commits

..

3 Commits

Author SHA1 Message Date
Diogo Cordeiro
2c67b5490e Add some stuff 2020-09-16 16:11:26 +01:00
Diogo Cordeiro
88dd2cf9f1 a lot of maintenance 2020-09-16 16:09:29 +01:00
Diogo Cordeiro
727baa9236 WIP 2020-09-11 01:14:20 +01:00
1385 changed files with 59156 additions and 5521 deletions

4
.zcache/DEBS_avail Normal file

File diff suppressed because one or more lines are too long

4
.zcache/DEBS_installed Normal file

File diff suppressed because one or more lines are too long

View File

@ -1,16 +1,16 @@
version=\ version=\
( (
'2.25.1' '2.35'
) )
url=\ url=\
( (
"http://mirrors.kernel.org/gnu/binutils/binutils-$version.tar.bz2" "http://mirrors.kernel.org/gnu/binutils/binutils-$version.tar.xz"
) )
md5=\ md5=\
( (
'ac493a78de4fee895961d025b7905be4' 'fc8d55e2f6096de8ff8171173b6f5087'
) )
maintainer=\ maintainer=\

View File

@ -0,0 +1,43 @@
version=\
(
'2.35'
)
url=\
(
"http://mirrors.kernel.org/gnu/binutils/binutils-$version.tar.xz"
)
md5=\
(
'fc8d55e2f6096de8ff8171173b6f5087'
)
maintainer=\
(
'Ricardo Martins <rasm@fe.up.pt>'
)
build_dir=$pkg_var
configure()
{
"../binutils-$version/configure" \
--prefix="$cfg_dir_toolchain" \
--target="$cfg_target_canonical" \
--host="$cfg_host_canonical" \
--build="$cfg_host_canonical" \
--with-sysroot="$cfg_dir_toolchain_sysroot" \
--disable-multilib \
--disable-nls
}
build()
{
$cmd_make
}
host_install()
{
$cmd_make install-strip
}

37
rules/bison/default.bash Normal file
View File

@ -0,0 +1,37 @@
version=\
(
'2.5.1'
)
url=\
(
"http://ftp.gnu.org/gnu/bison/bison-$version.tar.gz"
)
md5=\
(
'8fedf916f1aa2c4a31441d8f8bbc603c'
)
maintainer=\
(
'Ricardo Martins <rasm@fe.up.pt>'
)
configure()
{
./configure \
--prefix="$cfg_dir_toolchain" \
--disable-shared \
--enable-static
}
build()
{
$cmd_make
}
host_install()
{
$cmd_make install
}

View File

@ -1,16 +1,16 @@
version=\ version=\
( (
'4.9.3' '10.2.0'
) )
url=\ url=\
( (
"http://mirrors.kernel.org/gnu/gcc/gcc-$version/gcc-$version.tar.bz2" "http://mirrors.kernel.org/gnu/gcc/gcc-$version/gcc-$version.tar.xz"
) )
md5=\ md5=\
( (
'6f831b4d251872736e8e9cc09746f327' 'e9fd9b1789155ad09bcf3ae747596b50'
) )
build_dir=$pkg_var build_dir=$pkg_var

View File

@ -1,6 +1,6 @@
version=\ version=\
( (
'0.2.5' '1.2.6'
) )
url=\ url=\
@ -10,7 +10,7 @@ url=\
md5=\ md5=\
( (
'8cd41a5ef5a9b50d0fb6abb98af15368' 'b25f9cc18bfad50f7c446c77f4ae00bb'
) )
maintainer=\ maintainer=\

View File

@ -1,11 +1,11 @@
version=\ version=\
( (
'4.4.66' '5.8.7'
) )
url=\ url=\
( (
"https://www.kernel.org/pub/linux/kernel/v4.x/linux-$version.tar.xz" "https://www.kernel.org/pub/linux/kernel/v5.x/linux-$version.tar.xz"
) )
md5=\ md5=\

View File

@ -1,16 +1,16 @@
version=\ version=\
( (
'4.4.66' '5.4'
) )
url=\ url=\
( (
"https://www.kernel.org/pub/linux/kernel/v4.x/linux-$version.tar.xz" "https://www.kernel.org/pub/linux/kernel/v5.x/linux-$version.tar.xz"
) )
md5=\ md5=\
( (
'5353de56bf4621a35afc4384c7e51f30' 'ce9b2d974d27408a61c53a30d3f98fb9'
) )
maintainer=\ maintainer=\

View File

@ -2,19 +2,19 @@
version=\ version=\
( (
'4.4_2017-01-27' '5.4'
) )
url=\ url=\
( (
"http://lsts.pt/glued/rpi-linux-$version.zip" "http://archive.ubuntu.com/ubuntu/pool/universe/l/linux-raspi2/linux-raspi2_$version.0.orig.tar.gz"
) )
md5=\ md5=\
( (
'f31d48a9d2c93509b35e750be489b44c' '0707e4b2cbaf1428055d6615be04559e'
) )
build_dir="rpi-linux-rpi-linux-$version" build_dir="linux-$version"
find_patches find_patches

View File

@ -1,6 +1,6 @@
version=\ version=\
( (
'1.0.2e' '1.1.1f'
) )
url=\ url=\
@ -10,7 +10,7 @@ url=\
md5=\ md5=\
( (
'5262bfa25b60ed9de9f28d5d52d77fc5' '3f486f2f4435ef14b81814dbbc7b48bb'
) )
requires=\ requires=\
@ -23,6 +23,7 @@ configure()
./Configure linux-generic32 --cross-compile-prefix="$cfg_target_canonical-" \ ./Configure linux-generic32 --cross-compile-prefix="$cfg_target_canonical-" \
--prefix="$cfg_dir_toolchain_sysroot/usr" \ --prefix="$cfg_dir_toolchain_sysroot/usr" \
--openssldir="$cfg_dir_toolchain_sysroot/usr" \ --openssldir="$cfg_dir_toolchain_sysroot/usr" \
--libdir=lib \
shared shared
} }

View File

@ -1,6 +1,6 @@
version=\ version=\
( (
'0.2.2' '1.2.5'
) )
url=\ url=\
@ -10,7 +10,7 @@ url=\
md5=\ md5=\
( (
'8acf839bfef2364a05fbd6be5f8edf9a' 'ed46f09b9c0fa2d49015f6431bc5ea7b'
) )
maintainer=\ maintainer=\

View File

@ -1,11 +1,15 @@
version=\ version=\
( (
'2017-02-02' '1.20200212',
'2019.07',
'3.98ubuntu12'
) )
url=\ url=\
( (
"http://lsts.pt/glued/rpi-boot-firmware-$version.zip" "http://archive.ubuntu.com/ubuntu/pool/multiverse/l/linux-firmware-raspi2/linux-firmware-raspi2_$version.orig.tar.gz",
"http://archive.ubuntu.com/ubuntu/pool/main/u/u-boot/u-boot_$version+dfsg.orig.tar.xz",
"http://archive.ubuntu.com/ubuntu/pool/main/f/flash-kernel/flash-kernel_$version.tar.xz"
) )
maintainer=\ maintainer=\
@ -16,7 +20,9 @@ maintainer=\
md5=\ md5=\
( (
'eb42664fce4d73f167064e697dfacb76' '5b35887b1026fafe8174f473679d175a',
'5b35887b1026fafe8174f473679d175a',
'5b35887b1026fafe8174f473679d175a'
) )
target_install() target_install()

File diff suppressed because it is too large Load Diff

File diff suppressed because it is too large Load Diff

File diff suppressed because it is too large Load Diff

Binary file not shown.

View File

@ -0,0 +1 @@
net.ifnames=0 dwc_otg.lpm_enable=0 console=ttyAMA0,115200 console=tty1 root=/dev/mmcblk0p2 rootfstype=ext4 elevator=deadline rootwait

Binary file not shown.

Binary file not shown.

Binary file not shown.

Binary file not shown.

Binary file not shown.

Binary file not shown.

Binary file not shown.

Binary file not shown.

Binary file not shown.

Binary file not shown.

Binary file not shown.

Binary file not shown.

Binary file not shown.

Binary file not shown.

Binary file not shown.

Binary file not shown.

Binary file not shown.

File diff suppressed because it is too large Load Diff

View File

@ -0,0 +1,26 @@
An overview of the files on the /boot/firmware partition (the 1st partition
on the SD card) used by the Ubuntu boot process (roughly in order) is as
follows:
* bootcode.bin - this is the second stage bootloader loaded by all pis with
the exception of the pi4 (where this is replaced by flash
memory)
* config.txt - the first configuration file read by the boot process
* syscfg.txt - the file in which system modified configuration will be
placed, included by config.txt
* usercfg.txt - the file in which user modified configuration should be
placed, included by config.txt
* start*.elf - the third stage bootloader, which handles device-tree
modification and which loads...
* uboot*.bin - various u-boot binaries for different pi platforms; these
are launched as the "kernel" by config.txt
* boot.scr - the boot script executed by uboot*.bin which in turn
loads...
* vmlinuz - the Linux kernel, executed by boot.scr
* initrd.img - the initramfs, executed by boot.scr
* meta-data - meta-data for cloud-init; usually just contains the
instance id
* network-config - network configuration for cloud-init; edit this to set up
wifi access points and other networking settings
* user-data - user-data for cloud-init; edit this to configure initial
users, SSH keys, packages, etc.

Binary file not shown.

Binary file not shown.

Binary file not shown.

Binary file not shown.

Binary file not shown.

Binary file not shown.

Binary file not shown.

Binary file not shown.

Binary file not shown.

Binary file not shown.

Binary file not shown.

View File

@ -0,0 +1 @@
net.ifnames=0 dwc_otg.lpm_enable=0 console=serial0,115200 console=tty1 root=LABEL=writable rootfstype=ext4 elevator=deadline rootwait fixrtc

View File

@ -0,0 +1,35 @@
# Please DO NOT modify this file; if you need to modify the boot config, the
# "usercfg.txt" file is the place to include user changes. Please refer to
# the README file for a description of the various configuration files on
# the boot partition.
# The unusual ordering below is deliberate; older firmwares (in particular the
# version initially shipped with bionic) don't understand the conditional
# [sections] below and simply ignore them. The Pi4 doesn't boot at all with
# firmwares this old so it's safe to place at the top. Of the Pi2 and Pi3, the
# Pi3 uboot happens to work happily on the Pi2, so it needs to go at the bottom
# to support old firmwares.
[pi4]
kernel=uboot_rpi_4.bin
max_framebuffers=2
[pi2]
kernel=uboot_rpi_2.bin
[pi3]
kernel=uboot_rpi_3.bin
[all]
arm_64bit=1
device_tree_address=0x03000000
# The following settings are "defaults" expected to be overridden by the
# included configuration. The only reason they are included is, again, to
# support old firmwares which don't understand the "include" command.
enable_uart=1
cmdline=cmdline.txt
include syscfg.txt
include usercfg.txt

Binary file not shown.

Binary file not shown.

Binary file not shown.

Binary file not shown.

Binary file not shown.

Binary file not shown.

Binary file not shown.

Binary file not shown.

Binary file not shown.

View File

@ -0,0 +1,7 @@
# This is the meta-data configuration file for cloud-init. Typically this just
# contains the instance_id. Please refer to the cloud-init documentation for
# more information:
#
# https://cloudinit.readthedocs.io/
instance_id: cloud-image

View File

@ -0,0 +1,30 @@
# This file contains a netplan-compatible configuration which cloud-init
# will apply on first-boot. Please refer to the cloud-init documentation and
# the netplan reference for full details:
#
# https://cloudinit.readthedocs.io/
# https://netplan.io/reference
#
# Some additional examples are commented out below
version: 2
ethernets:
eth0:
dhcp4: true
optional: true
#wifis:
# wlan0:
# dhcp4: true
# optional: true
# access-points:
# myhomewifi:
# password: "S3kr1t"
# myworkwifi:
# password: "correct battery horse staple"
# workssid:
# auth:
# key-management: eap
# method: peap
# identity: "me@example.com"
# password: "passw0rd"
# ca-certificate: /etc/my_ca.pem

Binary file not shown.

Binary file not shown.

Binary file not shown.

Binary file not shown.

Binary file not shown.

Binary file not shown.

Binary file not shown.

Binary file not shown.

Binary file not shown.

Binary file not shown.

Binary file not shown.

Binary file not shown.

Binary file not shown.

Binary file not shown.

Binary file not shown.

Binary file not shown.

Binary file not shown.

Binary file not shown.

Binary file not shown.

Binary file not shown.

Binary file not shown.

Binary file not shown.

Binary file not shown.

Binary file not shown.

Binary file not shown.

Binary file not shown.

Binary file not shown.

Some files were not shown because too many files have changed in this diff Show More