Added necsave packages to lauv-xplore-2.

Conflicts:
	systems/lctr-b2xx/lauv-noptilus-3-aux.cfg

.gitignore

@@ -9,6 +9,3 @@
 /lauv-aux
 /lauv-aux-rpi
 /ntnu-b2xx
-/stamp9g20
-/lctr-rpi
-build.bash

architectures/arm926ej-s.cfg

@@ -1,4 +0,0 @@
-cfg_target_canonical="armv5te-$cfg_glued_vendor-linux-gnueabi"
-cfg_target_linux='arm'
-cfg_target_gcc_flags='-O2 -pipe -funit-at-a-time -mtune=arm926ej-s -mfloat-abi=soft'
-cfg_target_gcc_configure_flags='--with-arch=armv5te --with-tune=arm926ej-s --with-float=soft'

architectures/cortex-a72.cfg

@@ -1,6 +0,0 @@
-cfg_target_canonical="armv11-$cfg_glued_vendor-linux-gnueabi"
-cfg_target_linux='arm'
-cfg_target_uboot_arch='arm'
-cfg_target_gcc_flags='-O2 -pipe -funit-at-a-time -mcpu=cortex-a72 -mtune=cortex-a72 -mfloat-abi=hard -mfpu=neon-fp-armv8'
-cfg_target_gcc_configure_flags='--with-cpu=cortex-a72 --with-tune=cortex-a72 --with-fpu=neon-fp-armv8 --with-float=hard'
-cfg_target_ar_flags='aarch64-elf'

docker/Dockerfile

@@ -1,38 +0,0 @@
-###########################################################################
-# GLUED: GNU/Linux Uniform Environment Distribution                       #
-# Copyright (C) 2016 OceanScan - Marine Systems & Technology, Lda.        #
-###########################################################################
-# This program is free software; you can redistribute it and/or modify    #
-# it under the terms of the GNU General Public License as published by    #
-# the Free Software Foundation; either version 2 of the License, or (at   #
-# your option) any later version.                                         #
-#                                                                         #
-# This program is distributed in the hope that it will be useful, but     #
-# WITHOUT ANY WARRANTY; without even the implied warranty of              #
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU       #
-# General Public License for more details.                                #
-#                                                                         #
-# You should have received a copy of the GNU General Public License       #
-# along with this program; if not, write to the Free Software             #
-# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA           #
-# 02110-1301 USA.                                                         #
-###########################################################################
-# Author: Ricardo Martins                                                 #
-###########################################################################
-
-FROM debian:8
-
-MAINTAINER Ricardo Martins <rasm@oceanscan-mst.com>
-
-ENV DEBIAN_FRONTEND noninteractive
-
-# Update distro.
-RUN apt-get update -y
-RUN apt-get dist-upgrade -y
-RUN apt-get install -y wget
-RUN apt-get install -y bzip2
-RUN apt-get install -y git
-RUN apt-get install -y g++-multilib
-RUN apt-get install -y cmake
-RUN apt-get install -y file
-RUN apt-get install -y kmod

docker/Makefile

@@ -1,32 +0,0 @@
-###########################################################################
-# GLUED: GNU/Linux Uniform Environment Distribution                       #
-# Copyright (C) 2016 OceanScan - Marine Systems & Technology, Lda.        #
-###########################################################################
-# This program is free software; you can redistribute it and/or modify    #
-# it under the terms of the GNU General Public License as published by    #
-# the Free Software Foundation; either version 2 of the License, or (at   #
-# your option) any later version.                                         #
-#                                                                         #
-# This program is distributed in the hope that it will be useful, but     #
-# WITHOUT ANY WARRANTY; without even the implied warranty of              #
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU       #
-# General Public License for more details.                                #
-#                                                                         #
-# You should have received a copy of the GNU General Public License       #
-# along with this program; if not, write to the Free Software             #
-# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA           #
-# 02110-1301 USA.                                                         #
-###########################################################################
-# Author: Ricardo Martins                                                 #
-###########################################################################
-
-TAG     := glued
-VERSION := 2016.05.0
-VOLUME  := $(CURDIR)/..
-DNS	:= 8.8.8.8
-
-all:
-	docker build -t $(TAG):$(VERSION) .
-
-shell:
-	docker run -w $(VOLUME) --dns=$(DNS) -i -a stdin -a stdout -v $(VOLUME):$(VOLUME) -t $(TAG):$(VERSION)

functions.bash

@@ -1,6 +1,6 @@
 ###########################################################################
 # GLUED: GNU/Linux Uniform Environment Distribution                       #
-# Copyright (C) 2007-2019 Universidade do Porto - Faculdade de Engenharia #
+# Copyright (C) 2007-2014 Universidade do Porto - Faculdade de Engenharia #
 # Laboratório de Sistemas e Tecnologia Subaquática (LSTS)                 #
 ###########################################################################
 # This program is free software; you can redistribute it and/or modify    #
@@ -40,15 +40,3 @@ err()
 {
     echo -e "[$(date +"%Y-%m-%d %H:%M:%S")] \033[0m\033[1;31mERROR: $*\033[0m"
 }
-
-ucat()
-{
-    case "$1" in
-        *.gz)
-            zcat "$1"
-            ;;
-        *)
-            cat "$1"
-            ;;
-    esac
-}

mkconfig.bash

@@ -1,7 +1,7 @@
 #! /bin/bash
 ###########################################################################
 # GLUED: GNU/Linux Uniform Environment Distribution                       #
-# Copyright (C) 2007-2019 Universidade do Porto - Faculdade de Engenharia #
+# Copyright (C) 2007-2014 Universidade do Porto - Faculdade de Engenharia #
 # Laboratório de Sistemas e Tecnologia Subaquática (LSTS)                 #
 ###########################################################################
 # This program is free software; you can redistribute it and/or modify    #
@@ -23,7 +23,7 @@
 ###########################################################################
 
 # Config: GLUED version.
-cfg_glued_version='2017.11'
+cfg_glued_version='2016.03'
 # Config: GLUED vendor.
 cfg_glued_vendor='lsts'
 

mkdisk.bash

@@ -1,7 +1,7 @@
 #! /bin/bash
 ###########################################################################
 # GLUED: GNU/Linux Uniform Environment Distribution                       #
-# Copyright (C) 2007-2019 Universidade do Porto - Faculdade de Engenharia #
+# Copyright (C) 2007-2014 Universidade do Porto - Faculdade de Engenharia #
 # Laboratório de Sistemas e Tecnologia Subaquática (LSTS)                 #
 ###########################################################################
 # This program is free software; you can redistribute it and/or modify    #
@@ -103,17 +103,15 @@ create_part_rpiboot()
 
     for f in "$cfg_sys_family/rootfs/boot/"*; do
         nfo2 installing $f to boot partition
-        cp -r "$f" mount || die
+        cp "$f" mount || die
     done
 
     nfo2 renaming kernel to kernel7.img
     mv mount/kernel mount/kernel7.img
 
-    if [ -f mount/board.dtb ]; then
-        dtb=$(basename "$cfg_target_linux_dtb")
-        nfo2 renaming board.dtb to "$dtb"
-        mv "mount/board.dtb" "mount/$dtb"
-    fi
+    dtb=$(basename "$cfg_target_linux_dtb")
+    nfo2 renaming board.dtb to "$dtb"
+    mv "mount/board.dtb" "mount/$dtb"
 
     cmd_parted "$dev_loop" \
         set "$part_nr" lba on \

mkpackage.bash

@@ -1,7 +1,7 @@
 #! /bin/bash
 ###########################################################################
 # GLUED: GNU/Linux Uniform Environment Distribution                       #
-# Copyright (C) 2007-2019 Universidade do Porto - Faculdade de Engenharia #
+# Copyright (C) 2007-2014 Universidade do Porto - Faculdade de Engenharia #
 # Laboratório de Sistemas e Tecnologia Subaquática (LSTS)                 #
 ###########################################################################
 # This program is free software; you can redistribute it and/or modify    #
@@ -71,22 +71,17 @@ download()
             fi
         fi
 
-	# First try LSTS mirror.
-	lsts_url="https://www.lsts.pt/glued/$(basename $u)"
-        download_tool "$lsts_url" "$cfg_dir_downloads/$file"
+        # First try OceanScan-MST mirror.
+        omst_url="http://www.omst.pt/glued/$(basename $u)"
+        download_tool "$omst_url" "$cfg_dir_downloads/$file"
         if [ $? -ne 0 ]; then
-	    # Then try OceanScan-MST mirror.
-            omst_url="http://www.omst.pt/glued/$(basename $u)"
-            download_tool "$omst_url" "$cfg_dir_downloads/$file"
+            # On failure try upstream URL.
+            download_tool "$u" "$cfg_dir_downloads/$file"
             if [ $? -ne 0 ]; then
-		# On failure try upstream URL.
-		download_tool "$u" "$cfg_dir_downloads/$file"
-		if [ $? -ne 0 ]; then
-                    echo "ERROR: download failed"
-                    exit 1
-		fi
+                echo "ERROR: download failed"
+                exit 1
             fi
-	fi
+        fi
 
         md5="$(md5sum_tool "$cfg_dir_downloads/$file")"
         if [ "$s" != "$md5" ]; then

mksystem.bash

@@ -1,7 +1,7 @@
 #! /bin/bash
 ###########################################################################
 # GLUED: GNU/Linux Uniform Environment Distribution                       #
-# Copyright (C) 2007-2019 Universidade do Porto - Faculdade de Engenharia #
+# Copyright (C) 2007-2013 Universidade do Porto - Faculdade de Engenharia #
 # Laboratório de Sistemas e Tecnologia Subaquática (LSTS)                 #
 ###########################################################################
 # This program is free software; you can redistribute it and/or modify    #

mkupdate.bash

@@ -1,68 +0,0 @@
-#! /bin/bash
-###########################################################################
-# GLUED: GNU/Linux Uniform Environment Distribution                       #
-# Copyright (C) 2007-2019 Universidade do Porto - Faculdade de Engenharia #
-# Laboratório de Sistemas e Tecnologia Subaquática (LSTS)                 #
-###########################################################################
-# This program is free software; you can redistribute it and/or modify    #
-# it under the terms of the GNU General Public License as published by    #
-# the Free Software Foundation; either version 2 of the License, or (at   #
-# your option) any later version.                                         #
-#                                                                         #
-# This program is distributed in the hope that it will be useful, but     #
-# WITHOUT ANY WARRANTY; without even the implied warranty of              #
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU       #
-# General Public License for more details.                                #
-#                                                                         #
-# You should have received a copy of the GNU General Public License       #
-# along with this program; if not, write to the Free Software             #
-# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA           #
-# 02110-1301 USA.                                                         #
-###########################################################################
-# Author: Tiago Marques                                                   #
-###########################################################################
-
-update_tool()
-{
-    rsync -v "$1" root@"$2":/opt/"$cfg_glued_vendor"/glued/
-    if [ $? -eq 0 ]; then
-        return 0
-    fi
-
-    scp "$1" root@"$2":/opt/"$cfg_glued_vendor"/glued/
-    if [ $? -eq 0 ]; then
-        return 0
-    fi
-
-    return 1
-}
-
-# Check command line arguments.
-if [ $# -lt 1 ]; then
-    echo "Usage: $0 <config>"
-    exit 1
-fi
-
-# Read system configuration file.
-if ! [ -f "$1" ]; then
-    echo -e "\e[1;31mERROR: invalid configuration file '$1'\e[0m"
-    exit 1
-fi
-
-# Read system configuration file.
-source "$1"
-
-if [ ! -f "$cfg_rootfs_tar" ];
-then
-    echo -e "\e[1;31mERROR: You should run ./pkrootfs $1\e[0m"
-    exit 1
-fi
-
-# check for dirty repo
-if [[ "$cfg_glued_git_version" =~ .*-dirty$ ]]
-then
-    echo -e "\e[1;31mThis glued's version is dirty\e[0m"
-fi
-
-# send package to the system
-update_tool "$cfg_rootfs_tar" "$cfg_eth_ext_ip"

pkrootfs.bash

@@ -1,7 +1,7 @@
 #! /bin/bash
 ###########################################################################
 # GLUED: GNU/Linux Uniform Environment Distribution                       #
-# Copyright (C) 2007-2019 Universidade do Porto - Faculdade de Engenharia #
+# Copyright (C) 2007-2014 Universidade do Porto - Faculdade de Engenharia #
 # Laboratório de Sistemas e Tecnologia Subaquática (LSTS)                 #
 ###########################################################################
 # This program is free software; you can redistribute it and/or modify    #
@@ -60,7 +60,7 @@ done
 
 # Copy DTB.
 if [ -n "$cfg_target_linux_dtb" ]; then
-    cp -v "$cfg_dir_rootfs/boot/$(basename $cfg_target_linux_dtb)" "$cfg_dir_rootfs/boot/board.dtb"
+    cp -v "$cfg_dir_toolchain/boot/$(basename $cfg_target_linux_dtb)" "$cfg_dir_rootfs/boot/board.dtb"
 fi
 
 # Write config vars.

pktoolchain.bash

@@ -1,7 +1,7 @@
 #! /bin/bash
 ###########################################################################
 # GLUED: GNU/Linux Uniform Environment Distribution                       #
-# Copyright (C) 2007-2019 Universidade do Porto - Faculdade de Engenharia #
+# Copyright (C) 2007-2014 Universidade do Porto - Faculdade de Engenharia #
 # Laboratório de Sistemas e Tecnologia Subaquática (LSTS)                 #
 ###########################################################################
 # This program is free software; you can redistribute it and/or modify    #

rules/base/host.bash

@@ -26,5 +26,4 @@ requires=\
     'parted/host'
     'dosfstools/host'
     'e2fsprogs/host'
-    'cmake/host'
 )

rules/boost/default.bash

@@ -37,8 +37,7 @@ configure()
 {
     cd "../boost_$vendor_version" &&
     ./bootstrap.sh \
-        --with-icu="$cfg_dir_toolchain_sysroot/usr" \
-        --with-libraries="regex,filesystem,system,thread"
+        --with-icu="$cfg_dir_toolchain_sysroot/usr"
 
     GXX_VER=$(${cmd_target_cxx} -dumpversion)
     echo "using gcc : ${GXX_VER}  : ${cmd_target_cxx} : <cxxflags>\"-pipe -Os  -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 ${cfg_target_gcc_flags} \" <linkflags>\"\" ;" > user-config.jam

rules/bridge-utils/default.bash

@@ -1,16 +1,16 @@
 version=\
 (
-    '1.6'
+    '1.5'
 )
 
 url=\
 (
-    "http://www.kernel.org/pub/linux/utils/net/bridge-utils/bridge-utils-$version.tar.gz"
+    "http://downloads.sourceforge.net/project/bridge/bridge/bridge-utils-$version.tar.gz"
 )
 
 md5=\
 (
-    'f369e90e85e4bb46baa26a7b9d66b578'
+    'ec7b381160b340648dede58c31bb2238'
 )
 
 maintainer=\

rules/busybox/config

@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Busybox version: 1.24.1
-# Tue Apr  5 18:00:54 2016
+# Busybox version: 1.22.1
+# Sun Feb  8 18:17:19 2015
 #
 CONFIG_HAVE_DOT_CONFIG=y
 
@@ -36,8 +36,6 @@ CONFIG_LAST_SUPPORTED_WCHAR=767
 # CONFIG_UNICODE_BIDI_SUPPORT is not set
 # CONFIG_UNICODE_NEUTRAL_TABLE is not set
 # CONFIG_UNICODE_PRESERVE_BROKEN is not set
-# CONFIG_PAM is not set
-CONFIG_FEATURE_USE_SENDFILE=y
 CONFIG_LONG_OPTS=y
 CONFIG_FEATURE_DEVPTS=y
 # CONFIG_FEATURE_CLEAN_UP is not set
@@ -75,7 +73,6 @@ CONFIG_EXTRA_LDLIBS=""
 #
 # CONFIG_DEBUG is not set
 # CONFIG_DEBUG_PESSIMIZE is not set
-# CONFIG_UNIT_TEST is not set
 # CONFIG_WERROR is not set
 CONFIG_NO_DEBUG_LIB=y
 # CONFIG_DMALLOC is not set
@@ -156,11 +153,10 @@ CONFIG_XZ=y
 # CONFIG_GZIP is not set
 # CONFIG_FEATURE_GZIP_LONG_OPTIONS is not set
 CONFIG_GZIP_FAST=0
-# CONFIG_FEATURE_GZIP_LEVELS is not set
 # CONFIG_LZOP is not set
 # CONFIG_LZOP_COMPR_HIGH is not set
-# CONFIG_RPM2CPIO is not set
 # CONFIG_RPM is not set
+# CONFIG_RPM2CPIO is not set
 CONFIG_TAR=y
 # CONFIG_FEATURE_TAR_CREATE is not set
 CONFIG_FEATURE_TAR_AUTODETECT=y
@@ -184,17 +180,9 @@ CONFIG_DATE=y
 CONFIG_FEATURE_DATE_ISOFMT=y
 # CONFIG_FEATURE_DATE_NANO is not set
 CONFIG_FEATURE_DATE_COMPAT=y
-CONFIG_DD=y
-CONFIG_FEATURE_DD_SIGNAL_HANDLING=y
-# CONFIG_FEATURE_DD_THIRD_STATUS_LINE is not set
-# CONFIG_FEATURE_DD_IBS_OBS is not set
-CONFIG_FEATURE_DD_STATUS=y
 # CONFIG_HOSTID is not set
 CONFIG_ID=y
 CONFIG_GROUPS=y
-CONFIG_SHUF=y
-CONFIG_SYNC=y
-CONFIG_FEATURE_SYNC_FANCY=y
 CONFIG_TEST=y
 # CONFIG_FEATURE_TEST_64 is not set
 CONFIG_TOUCH=y
@@ -203,8 +191,6 @@ CONFIG_FEATURE_TOUCH_SUSV3=y
 CONFIG_TR=y
 CONFIG_FEATURE_TR_CLASSES=y
 CONFIG_FEATURE_TR_EQUIV=y
-CONFIG_TRUNCATE=y
-CONFIG_UNLINK=y
 CONFIG_BASE64=y
 # CONFIG_WHO is not set
 # CONFIG_USERS is not set
@@ -220,6 +206,10 @@ CONFIG_CHROOT=y
 CONFIG_CP=y
 # CONFIG_FEATURE_CP_LONG_OPTIONS is not set
 CONFIG_CUT=y
+CONFIG_DD=y
+CONFIG_FEATURE_DD_SIGNAL_HANDLING=y
+# CONFIG_FEATURE_DD_THIRD_STATUS_LINE is not set
+# CONFIG_FEATURE_DD_IBS_OBS is not set
 CONFIG_DF=y
 # CONFIG_FEATURE_DF_FANCY is not set
 CONFIG_DIRNAME=y
@@ -288,6 +278,7 @@ CONFIG_STAT=y
 CONFIG_FEATURE_STAT_FORMAT=y
 CONFIG_STTY=y
 # CONFIG_SUM is not set
+CONFIG_SYNC=y
 # CONFIG_TAC is not set
 CONFIG_TAIL=y
 # CONFIG_FEATURE_FANCY_TAIL is not set
@@ -296,7 +287,6 @@ CONFIG_TEE=y
 CONFIG_TRUE=y
 CONFIG_TTY=y
 CONFIG_UNAME=y
-CONFIG_UNAME_OSNAME="GNU/Linux"
 # CONFIG_UNEXPAND is not set
 # CONFIG_FEATURE_UNEXPAND_LONG_OPTIONS is not set
 CONFIG_UNIQ=y
@@ -308,11 +298,6 @@ CONFIG_WC=y
 CONFIG_WHOAMI=y
 CONFIG_YES=y
 
-#
-# Common options
-#
-CONFIG_FEATURE_VERBOSE=y
-
 #
 # Common options for cp and mv
 #
@@ -399,9 +384,6 @@ CONFIG_FEATURE_VI_USE_SIGNALS=y
 # CONFIG_FEATURE_VI_SET is not set
 CONFIG_FEATURE_VI_WIN_RESIZE=y
 CONFIG_FEATURE_VI_ASK_TERMINAL=y
-CONFIG_FEATURE_VI_UNDO=y
-CONFIG_FEATURE_VI_UNDO_QUEUE=y
-CONFIG_FEATURE_VI_UNDO_QUEUE_MAX=256
 CONFIG_FEATURE_ALLOW_EXEC=y
 
 #
@@ -418,7 +400,6 @@ CONFIG_FEATURE_FIND_MAXDEPTH=y
 # CONFIG_FEATURE_FIND_NEWER is not set
 # CONFIG_FEATURE_FIND_INUM is not set
 CONFIG_FEATURE_FIND_EXEC=y
-CONFIG_FEATURE_FIND_EXEC_PLUS=y
 CONFIG_FEATURE_FIND_USER=y
 CONFIG_FEATURE_FIND_GROUP=y
 CONFIG_FEATURE_FIND_NOT=y
@@ -440,7 +421,6 @@ CONFIG_XARGS=y
 CONFIG_FEATURE_XARGS_SUPPORT_QUOTES=y
 # CONFIG_FEATURE_XARGS_SUPPORT_TERMOPT is not set
 CONFIG_FEATURE_XARGS_SUPPORT_ZERO_TERM=y
-CONFIG_FEATURE_XARGS_SUPPORT_REPL_STR=y
 
 #
 # Init Utilities
@@ -477,7 +457,6 @@ CONFIG_USE_BB_CRYPT=y
 CONFIG_ADDUSER=y
 # CONFIG_FEATURE_ADDUSER_LONG_OPTIONS is not set
 # CONFIG_FEATURE_CHECK_NAMES is not set
-CONFIG_LAST_ID=60000
 CONFIG_FIRST_SYSTEM_ID=100
 CONFIG_LAST_SYSTEM_ID=999
 CONFIG_ADDGROUP=y
@@ -489,6 +468,7 @@ CONFIG_DELGROUP=y
 CONFIG_GETTY=y
 CONFIG_LOGIN=y
 # CONFIG_LOGIN_SESSION_AS_CHILD is not set
+# CONFIG_PAM is not set
 # CONFIG_LOGIN_SCRIPTS is not set
 CONFIG_FEATURE_NOLOGIN=y
 # CONFIG_FEATURE_SECURETTY is not set
@@ -546,7 +526,6 @@ CONFIG_DEFAULT_DEPMOD_FILE="modules.dep"
 # Linux System Utilities
 #
 CONFIG_BLOCKDEV=y
-CONFIG_FATATTR=y
 CONFIG_FSTRIM=y
 CONFIG_MDEV=y
 CONFIG_FEATURE_MDEV_CONF=y
@@ -554,18 +533,7 @@ CONFIG_FEATURE_MDEV_RENAME=y
 CONFIG_FEATURE_MDEV_RENAME_REGEXP=y
 CONFIG_FEATURE_MDEV_EXEC=y
 CONFIG_FEATURE_MDEV_LOAD_FIRMWARE=y
-CONFIG_MOUNT=y
-# CONFIG_FEATURE_MOUNT_FAKE is not set
-# CONFIG_FEATURE_MOUNT_VERBOSE is not set
-# CONFIG_FEATURE_MOUNT_HELPERS is not set
-CONFIG_FEATURE_MOUNT_LABEL=y
-# CONFIG_FEATURE_MOUNT_NFS is not set
-# CONFIG_FEATURE_MOUNT_CIFS is not set
-CONFIG_FEATURE_MOUNT_FLAGS=y
-CONFIG_FEATURE_MOUNT_FSTAB=y
-CONFIG_FEATURE_MOUNT_OTHERTAB=y
 CONFIG_REV=y
-CONFIG_UEVENT=y
 # CONFIG_ACPID is not set
 # CONFIG_FEATURE_ACPID_COMPAT is not set
 CONFIG_BLKID=y
@@ -611,6 +579,15 @@ CONFIG_FEATURE_HWCLOCK_ADJTIME_FHS=y
 # CONFIG_MKSWAP is not set
 # CONFIG_FEATURE_MKSWAP_UUID is not set
 CONFIG_MORE=y
+CONFIG_MOUNT=y
+# CONFIG_FEATURE_MOUNT_FAKE is not set
+# CONFIG_FEATURE_MOUNT_VERBOSE is not set
+# CONFIG_FEATURE_MOUNT_HELPERS is not set
+CONFIG_FEATURE_MOUNT_LABEL=y
+# CONFIG_FEATURE_MOUNT_NFS is not set
+# CONFIG_FEATURE_MOUNT_CIFS is not set
+CONFIG_FEATURE_MOUNT_FLAGS=y
+CONFIG_FEATURE_MOUNT_FSTAB=y
 CONFIG_PIVOT_ROOT=y
 # CONFIG_RDATE is not set
 # CONFIG_RDEV is not set
@@ -620,7 +597,6 @@ CONFIG_PIVOT_ROOT=y
 # CONFIG_SCRIPTREPLAY is not set
 # CONFIG_SETARCH is not set
 # CONFIG_SWAPONOFF is not set
-# CONFIG_FEATURE_SWAPON_DISCARD is not set
 # CONFIG_FEATURE_SWAPON_PRI is not set
 CONFIG_SWITCH_ROOT=y
 CONFIG_UMOUNT=y
@@ -663,19 +639,10 @@ CONFIG_FEATURE_VOLUMEID_SQUASHFS=y
 # Miscellaneous Utilities
 #
 # CONFIG_CONSPY is not set
-# CONFIG_CROND is not set
-# CONFIG_FEATURE_CROND_D is not set
-# CONFIG_FEATURE_CROND_CALL_SENDMAIL is not set
-CONFIG_FEATURE_CROND_DIR=""
-CONFIG_I2CGET=y
-CONFIG_I2CSET=y
-CONFIG_I2CDUMP=y
-CONFIG_I2CDETECT=y
 CONFIG_LESS=y
 CONFIG_FEATURE_LESS_MAXLINES=9999999
 CONFIG_FEATURE_LESS_BRACKETS=y
 CONFIG_FEATURE_LESS_FLAGS=y
-CONFIG_FEATURE_LESS_TRUNCATE=y
 # CONFIG_FEATURE_LESS_MARKS is not set
 # CONFIG_FEATURE_LESS_REGEXP is not set
 # CONFIG_FEATURE_LESS_WINCH is not set
@@ -686,8 +653,6 @@ CONFIG_FEATURE_LESS_TRUNCATE=y
 # CONFIG_NANDDUMP is not set
 # CONFIG_RFKILL is not set
 CONFIG_SETSERIAL=y
-# CONFIG_TASKSET is not set
-# CONFIG_FEATURE_TASKSET_FANCY is not set
 # CONFIG_UBIATTACH is not set
 # CONFIG_UBIDETACH is not set
 CONFIG_UBIMKVOL=y
@@ -710,6 +675,10 @@ CONFIG_FEATURE_BEEP_LENGTH_MS=0
 # CONFIG_FEATURE_CHAT_VAR_ABORT_LEN is not set
 # CONFIG_FEATURE_CHAT_CLR_ABORT is not set
 # CONFIG_CHRT is not set
+# CONFIG_CROND is not set
+# CONFIG_FEATURE_CROND_D is not set
+# CONFIG_FEATURE_CROND_CALL_SENDMAIL is not set
+CONFIG_FEATURE_CROND_DIR=""
 # CONFIG_CRONTAB is not set
 # CONFIG_DC is not set
 # CONFIG_FEATURE_DC_LIBM is not set
@@ -725,7 +694,7 @@ CONFIG_FEATURE_BEEP_LENGTH_MS=0
 CONFIG_FLASHCP=y
 CONFIG_FLASH_LOCK=y
 CONFIG_FLASH_UNLOCK=y
-CONFIG_FLASH_ERASEALL=y
+# CONFIG_FLASH_ERASEALL is not set
 # CONFIG_IONICE is not set
 # CONFIG_INOTIFYD is not set
 # CONFIG_LAST is not set
@@ -751,6 +720,8 @@ CONFIG_MOUNTPOINT=y
 # CONFIG_RX is not set
 # CONFIG_SETSID is not set
 # CONFIG_STRINGS is not set
+# CONFIG_TASKSET is not set
+# CONFIG_FEATURE_TASKSET_FANCY is not set
 CONFIG_TIME=y
 # CONFIG_TIMEOUT is not set
 # CONFIG_TTYSIZE is not set
@@ -770,13 +741,6 @@ CONFIG_NC_EXTRA=y
 CONFIG_PING=y
 # CONFIG_PING6 is not set
 CONFIG_FEATURE_FANCY_PING=y
-CONFIG_WGET=y
-# CONFIG_FEATURE_WGET_STATUSBAR is not set
-CONFIG_FEATURE_WGET_AUTHENTICATION=y
-# CONFIG_FEATURE_WGET_LONG_OPTIONS is not set
-CONFIG_FEATURE_WGET_TIMEOUT=y
-CONFIG_FEATURE_WGET_OPENSSL=y
-CONFIG_FEATURE_WGET_SSL_HELPER=y
 CONFIG_WHOIS=y
 # CONFIG_FEATURE_IPV6 is not set
 # CONFIG_FEATURE_UNIX_LOCAL is not set
@@ -793,13 +757,13 @@ CONFIG_ETHER_WAKE=y
 CONFIG_FTPD=y
 CONFIG_FEATURE_FTP_WRITE=y
 CONFIG_FEATURE_FTPD_ACCEPT_BROKEN_LIST=y
-CONFIG_FEATURE_FTP_AUTHENTICATION=y
 # CONFIG_FTPGET is not set
 # CONFIG_FTPPUT is not set
 # CONFIG_FEATURE_FTPGETPUT_LONG_OPTIONS is not set
 CONFIG_HOSTNAME=y
 # CONFIG_HTTPD is not set
 # CONFIG_FEATURE_HTTPD_RANGES is not set
+# CONFIG_FEATURE_HTTPD_USE_SENDFILE is not set
 # CONFIG_FEATURE_HTTPD_SETUID is not set
 # CONFIG_FEATURE_HTTPD_BASIC_AUTH is not set
 # CONFIG_FEATURE_HTTPD_AUTH_MD5 is not set
@@ -838,7 +802,6 @@ CONFIG_IP=y
 CONFIG_FEATURE_IP_ADDRESS=y
 CONFIG_FEATURE_IP_LINK=y
 CONFIG_FEATURE_IP_ROUTE=y
-CONFIG_FEATURE_IP_ROUTE_DIR="/etc/iproute2"
 # CONFIG_FEATURE_IP_TUNNEL is not set
 # CONFIG_FEATURE_IP_RULE is not set
 # CONFIG_FEATURE_IP_SHORT_FORMS is not set
@@ -857,7 +820,6 @@ CONFIG_FEATURE_IP_ROUTE_DIR="/etc/iproute2"
 # CONFIG_NSLOOKUP is not set
 # CONFIG_NTPD is not set
 # CONFIG_FEATURE_NTPD_SERVER is not set
-# CONFIG_FEATURE_NTPD_CONF is not set
 # CONFIG_PSCAN is not set
 CONFIG_ROUTE=y
 # CONFIG_SLATTACH is not set
@@ -891,7 +853,6 @@ CONFIG_FEATURE_TELNET_AUTOLOGIN=y
 CONFIG_DHCPD_LEASES_FILE=""
 CONFIG_UDHCPC=y
 # CONFIG_FEATURE_UDHCPC_ARPING is not set
-CONFIG_FEATURE_UDHCPC_SANITIZEOPT=y
 # CONFIG_FEATURE_UDHCP_PORT is not set
 CONFIG_UDHCP_DEBUG=9
 CONFIG_FEATURE_UDHCP_RFC3397=y
@@ -901,6 +862,11 @@ CONFIG_UDHCPC_SLACK_FOR_BUGGY_SERVERS=80
 CONFIG_IFUPDOWN_UDHCPC_CMD_OPTIONS=""
 # CONFIG_UDPSVD is not set
 # CONFIG_VCONFIG is not set
+CONFIG_WGET=y
+# CONFIG_FEATURE_WGET_STATUSBAR is not set
+CONFIG_FEATURE_WGET_AUTHENTICATION=y
+# CONFIG_FEATURE_WGET_LONG_OPTIONS is not set
+CONFIG_FEATURE_WGET_TIMEOUT=y
 # CONFIG_ZCIP is not set
 
 #
@@ -1005,7 +971,6 @@ CONFIG_ASH_GETOPTS=y
 # CONFIG_ASH_BUILTIN_ECHO is not set
 CONFIG_ASH_BUILTIN_PRINTF=y
 CONFIG_ASH_BUILTIN_TEST=y
-CONFIG_ASH_HELP=y
 # CONFIG_ASH_CMDCMD is not set
 # CONFIG_ASH_MAIL is not set
 CONFIG_ASH_OPTIMIZE_FOR_SIZE=y

rules/curl/default.bash

@@ -35,11 +35,6 @@ build()
 host_install()
 {
     $cmd_make install
-    # make available for cross compilation
-    for f in "${cfg_dir_toolchain_sysroot}/usr/lib/"libcurl*so*; do
-        echo "Doing $f"
-        ln -s -f "$f" "${cfg_dir_toolchain}/lib"
-    done
 }
 
 target_install()

rules/dune/default.bash

@@ -1,6 +1,6 @@
 version=\
 (
-    'master'
+    'mission/necsave'
 )
 
 requires=\

rules/escc/default.bash

@@ -1,6 +1,6 @@
 version=\
 (
-    '1.0.71'
+    '1.0.6'
 )
 
 url=\
@@ -10,7 +10,7 @@ url=\
 
 md5=\
 (
-    '075c9256fe20cf6ce867dc2b1c974ebe'
+    '07783e66e27601ab0a8250c328b3d6bf'
 )
 
 if [ -d "$cfg_dir_builds/linux/linux-"* ]; then

rules/exiftool/default.bash

@@ -1,37 +0,0 @@
-version=\
-(
-  "10.96"
-)
-
-url=\
-(
-  "https://lsts.pt/glued/exiftoolBin-${version}.tar.gz"
-)
-
-md5=\
-(
-  "71d52bf2d75f023b844dd8c9100daaff"
-)
-
-maintainer=\
-(
-  'Pedro Gonçalves <pedro@lsts.pt>'
-)
-
-requires=\
-(
-    'perl/default'
-)
-
-post_unpack()
-{
-    $cmd_cp -r ../exiftoolBin-${version}/* .
-}
-
-target_install()
-{
-   $cmd_cp -rv usr/* $cfg_dir_toolchain_sysroot/usr/
-   $cmd_cp -rv usr/* $cfg_dir_rootfs/usr/
-   $cmd_cp -rv usr/local/bin/* $cfg_dir_rootfs/usr/bin/
-}
-

rules/exiv2/default.bash

@@ -1,57 +0,0 @@
-version=\
-(
-  "0.25"
-)
-
-url=\
-(
-  "http://lsts.pt/glued/exiv2-${version}.tar.gz"
-)
-
-md5=\
-(
-  "258d4831b30f75a01e0234065c6c2806"
-)
-
-maintainer=\
-(
-    'Pedro Gonçalves <pedro@lsts.pt>'
-)
-
-requires=\
-(
-    "gettext/host"
-)
-
-configure()
-{
-  ./configure \
-    --datadir="$cfg_dir_toolchain_sysroot" \
-    --prefix="$cfg_dir_rootfs/usr" \
-    --includedir="$cfg_dir_toolchain_sysroot/usr/include" \
-    --enable-cross-compile \
-    --build=$cfg_target_linux \
-    --host="$cfg_target_canonical" \
-    --enable-shared \
-    --disable-static \
-    --disable-xmp
-}
-
-build()
-{
-  $cmd_make
-}
-
-host_install()
-{
-  $cmd_make install
-}
-
-target_install()
-{
-  # Libs:
-  for f in "$cfg_dir_rootfs/lib/"libexiv2*; do
-      cp -av "$f" "$cfg_dir_toolchain_sysroot/usr/lib"
-  done
-}
-

rules/ffmpeg/default.bash

@@ -15,14 +15,12 @@ md5=\
 
 configure()
 {
-    mkdir -p ../build
     ./configure \
         --sysroot="$cfg_dir_toolchain_sysroot" \
         --prefix="$cfg_dir_rootfs/usr" \
         --incdir="$cfg_dir_toolchain_sysroot/usr/include" \
         --enable-cross-compile \
         --cross-prefix="$cfg_target_canonical-" \
-        --libdir="$cfg_dir_builds/ffmpeg/build" \
         --target-os="linux" \
         --enable-shared \
         --disable-static \
@@ -41,16 +39,10 @@ host_install()
     $cmd_make \
 	LIBDIR="$cfg_dir_toolchain_sysroot/usr/lib" \
         install-headers
-
-    $cmd_make \
-        install-libs
 }
 
 target_install()
 {
     $cmd_make \
         install-libs
-
-    $cmd_cp -r "$cfg_dir_builds/ffmpeg/build/"* "$cfg_dir_rootfs/usr/lib/"
-    $cmd_cp -r "$cfg_dir_builds/ffmpeg/build/"* "$cfg_dir_toolchain_sysroot/usr/lib/"
 }

rules/filesystem/fs/etc/rc.d/check_wlan

@@ -1,15 +0,0 @@
-start()
-{
-    if [ ! -f /opt/check_wlan ]; then
-        cp -ri /etc/check_wlan /opt/
-    fi
-
-    sh /opt/check_wlan  < /dev/null > /dev/null 2>&1 &
-}
-
-stop()
-{
-    echo "* Stopping process..."
-    killall sh /opt/check_wlan -9 > /dev/null 2>&1
-    echo "* Process not running."
-}

rules/filesystem/fs/etc/rc.d/network-wlan

@@ -1,87 +0,0 @@
-start()
-{
-    ifconfig wlan0 up
-    if [ -n "$cfg_eth_ext_ip$cfg_eth_prv_ip" ]; then
-        while [ 1 ]; do
-            echo "* Waiting for wlan0 device..."
-            ifconfig wlan0 > /dev/null 2>&1
-            [ $? -eq 0 ] && break
-            usleep 250000
-        done
-    fi
-
-    if [ -n "$cfg_bridge0_ip" ]; then
-        for itf in $cfg_bridge0_itfs; do
-            ifconfig $itf 0.0.0.0
-        done
-
-        brctl addbr bridge0
-
-        for itf in $cfg_bridge0_itfs; do
-            brctl addif bridge0 $itf
-        done
-
-        ifconfig bridge0 $cfg_bridge0_ip netmask $cfg_bridge0_nmask up
-        ifconfig bridge0 multicast
-        route add -net 224.0.0.0 netmask 240.0.0.0 dev bridge0
-    fi
-
-    # Public ethernet.
-    if [ -n "$cfg_eth_ext_ip" ]; then
-        if [ -n "$cfg_eth_ext_mk" ]; then
-            ifconfig wlan0 "$cfg_eth_ext_ip" netmask "$cfg_eth_ext_mk" up
-        else
-            ifconfig wlan0 "$cfg_eth_ext_ip" up
-        fi
-        ifconfig wlan0 multicast
-        route add -net 224.0.0.0 netmask 240.0.0.0 dev wlan0
-
-        # Fixed mac address with $cfg_eth_ext_mac based derivated from IP address $cfg_eth_ext_ip
-        if [ -n "$cfg_eth_ext_mac" ]; then
-          ifconfig wlan0 hw ether $cfg_eth_ext_mac
-        fi
-    fi
-
-    if [ -n "$cfg_eth_ext_gw" ]; then
-        route add default gw "$cfg_eth_ext_gw"
-    fi
-
-    if [ -n "$cfg_eth_ext_dns" ]; then
-        echo "nameserver $cfg_eth_ext_dns" > /etc/resolv.conf
-    fi
-
-    # Private ethernet.
-    if [ -n "$cfg_eth_prv_ip" ]; then
-        ifconfig wlan0:prv "$cfg_eth_prv_ip" up
-    fi
-
-    # Static ARP table.
-    if [ -n "$cfg_arp_table" ]; then
-        for e in $cfg_arp_table; do
-            ip="$(echo $e | cut -f1 -d'|')"
-            mac="$(echo $e | cut -f2 -d'|')"
-            arp -s "$ip" "$mac"
-        done
-    fi
-
-    iw wlan0 connect LSTS
-    ifconfig eth0 down
-}
-
-stop()
-{
-    # Public ethernet.
-    if [ -n "$cfg_eth_ext_gw" ]; then
-        route del default
-    fi
-
-    if [ -n "$cfg_eth_ext_ip" ]; then
-        route del -net 224.0.0.0 netmask 240.0.0.0 dev wlan0
-        ifconfig wlan0 down
-    fi
-
-    # Private ethernet.
-    if [ -n "$cfg_eth_prv_ip" ]; then
-        ifconfig wlan0:prv down
-    fi
-}

rules/filesystem/fs/etc/rc.d/upgrade

@@ -60,17 +60,24 @@ new_unpack()
     return 1
 }
 
-kernel_mtd_part()
+kernel_dst()
 {
-    echo -n "* Detecting kernel MTD partition... "
+    echo -n "* Detecting kernel destination... "
 
+    # Kernel resides in the root filesystem.
     if [ -d /boot/extlinux ]; then
-        echo "not present"
+        echo "filesystem"
         return 0
     fi
 
     if ! [ -f /proc/mtd ]; then
-        echo "not present"
+        echo "filesystem"
+        return 0
+    fi
+
+    grep 'uboot=ext2' /proc/cmdline > /dev/null 2>&1
+    if [ $? -eq 0 ]; then
+        echo "filesystem"
         return 0
     fi
 
@@ -78,65 +85,21 @@ kernel_mtd_part()
     if [ -z "$fw_kernel_mtd" ]; then
         export fw_kernel_mtd="$(grep \"Kernel\" /proc/mtd | cut -f1 -d':')"
         if [ -z "$fw_kernel_mtd" ]; then
-            echo "not present"
+            echo "failed to detect kernel's MTD partition"
             return 1
         fi
     fi
 
-    echo "$fw_kernel_mtd"
+    echo "mtd"
     return 0
 }
 
-uboot_mtd_part()
-{
-    echo -n "* Detecting u-boot MTD partition... "
-    if ! [ -f /proc/mtd ]; then
-        echo "filesystem"
-        return 0
-    fi
-
-    export fw_uboot_mtd="$(grep \"uboot\" /proc/mtd | cut -f1 -d':')"
-    if [ -z "$fw_uboot_mtd" ]; then
-        export fw_uboot_mtd="$(grep \"u-boot\" /proc/mtd | cut -f1 -d':')"
-        if [ -z "$fw_uboot_mtd" ]; then
-            echo "not present"
-            return 1
-        fi
-    fi
-
-    echo "$fw_uboot_mtd"
-    return 0
-}
-
-uboot_mtd_upgrade()
-{
-    bin="$base/.glued-new/boot/u-boot.bin"
-
-    if ! [ -f "$bin" ]; then
-        return 0
-    fi
-
-    if [ -z "$fw_uboot_mtd" ]; then
-        return 0
-    fi
-
-    echo -n "* Upgrading u-boot MTD partition... "
-    "$flashcp" -v "$bin" /dev/"$fw_uboot_mtd"
-    if [ $? -ne 0 ]; then
-        echo "failed"
-        return 1
-    fi
-
-    echo "done"
-    return 0
-}
-
-kernel_mtd_upgrade()
+kernel_upgrade()
 {
     # Upgrade MTD
     if [ -n "$fw_kernel_mtd" ]; then
         echo -n "* Upgrading kernel... "
-        "$flashcp" -v "$base/.glued-new/boot/kernel" /dev/"$fw_kernel_mtd"
+        "$flashcp" -v "$base/.glued-new/boot/kernel" /dev/"$fw_kernel_mtd" > /dev/null 2>&1
         if [ $? -ne 0 ]; then
             echo "failed"
             return 1
@@ -239,19 +202,12 @@ rpi2_boot_part_upgrade()
         fi
     done
 
-    for f in overlays; do
-        if [ -d "/mnt/$f" ]; then
-            echo -en "* $label: Replacing $f... "
-	    rm -rf "/mnt/$f" && cp -r "$base/.glued-new/boot/$f" /mnt
-            echo 'done'
-        fi
-    done
-
-    for dtb in "$base/.glued-new/boot/"*.dtb; do
+    dtb="bcm2709-rpi-2-b.dtb"
+    if [ -f "/mnt/$dtb" ]; then
         echo -en "* $label: Replacing $dtb... "
-        cp "$dtb" "/mnt"
+        cp "$base/.glued-new/boot/board.dtb" "/mnt/$dtb"
         echo 'done'
-    done
+    fi
 
     kernel='kernel7.img'
     if [ -f "/mnt/$kernel" ]; then
@@ -272,17 +228,15 @@ rpi2_boot_part_upgrade()
     return 0
 }
 
-# Check if board is a Raspberry Pi 2/3.
+# Check if board is a Raspberry Pi 2.
 rpi2_boot_part_upgrade_check()
 {
-    for machine in 'bcm2709' 'raspberry pi'; do
-        dmesg | grep Machine | grep -i "$machine" > /dev/null 2>&1
-        if [ $? -eq 0 ]; then
-            echo "* rpi2: machine detected"
-            rpi2_boot_part_upgrade "rpi2" "/dev/mmcblk0p1"
-            return 0
-        fi
-    done
+    dmesg | grep Machine | grep BCM2709 > /dev/null 2>&1
+    if [ $? -eq 0 ]; then
+        echo "* rpi2: machine detected"
+        rpi2_boot_part_upgrade "rpi2" "/dev/mmcblk0p1"
+        return 0
+    fi
 }
 
 old_move()
@@ -330,13 +284,11 @@ start()
 {
     clean
     version || return 1
-    kernel_mtd_part || return 1
-    uboot_mtd_part || return 1
+    kernel_dst || return 1
     new_unpack || return 1
     uboot_part_upgrade_check || return 1
     rpi2_boot_part_upgrade_check || return 1
-    kernel_mtd_upgrade || return 1
-    uboot_mtd_upgrade || return 1
+    kernel_upgrade || return 1
     old_move || return 1
 }
 

rules/gcc/cross.bash

@@ -49,15 +49,10 @@ host_install()
 
 target_install()
 {
-    libdir=lib
-    if [ -d "$cfg_dir_toolchain/$cfg_target_canonical/lib64" ]; then
-        libdir=lib64
-    fi
-
     $cmd_mkdir \
-        "$cfg_dir_rootfs/usr/$libdir" &&
+        "$cfg_dir_rootfs/usr/lib" &&
 
-    for f in "$cfg_dir_toolchain/$cfg_target_canonical/$libdir/"{libgcc_s,libstdc++}.so*; do
+    for f in "$cfg_dir_toolchain/$cfg_target_canonical/lib/"{libgcc_s,libstdc++}.so*; do
         base="$(basename $f)"
 
         if [ $(echo "$base" | grep '\.py' 2> /dev/null) ]; then

rules/gdb/common.bash

@@ -1,6 +1,6 @@
 version=\
 (
-    '7.10.1'
+    '7.8.2'
 )
 
 url=\
@@ -10,5 +10,5 @@ url=\
 
 md5=\
 (
-    '39e654460c9cdd80200a29ac020cfe11'
+    'a80cf252ed2e775d4e4533341bbf2459'
 )

rules/htop/default.bash

@@ -1,37 +0,0 @@
-version=\
-(
-    '2.0.2'
-)
-
-url=\
-(
-    "https://hisham.hm/htop/releases/$version/htop-$version.tar.gz"
-)
-
-md5=\
-(
-    '7d354d904bad591a931ad57e99fea84a'
-)
-
-maintainer=\
-(
-    'Jose Pinto <zepinto@lsts.pt>'
-)
-
-build()
-{
-    $cmd_make
-}
-
-configure()
-{
-    cd "../htop-$version"
-    ./configure --disable-unicode --prefix="${cfg_dir_rootfs}"
-}
-
-target_install()
-{
-    cd "../htop-$version"
-    $cmd_make install
-}
-

rules/iw/default.bash

@@ -1,34 +0,0 @@
-version=\
-(
-    "4.9"
-)
-
-url=\
-(
-    "http://lsts.pt/glued/iw-$version.tar.bz2"
-)
-
-md5=\
-(
-  "ae8ccaa154449300c2c02eb90a37eebb"
-)
-
-maintainer=\
-(
-    'Pedro Gonçalves <pedro@lsts.pt>'
-)
-
-configure()
-{
-    mv "../iw_$version/etc" "../iw-$version/"
-    mv "../iw_$version/lib" "../iw-$version/"
-    mv "../iw_$version/sbin" "../iw-$version/"
-}
-
-target_install()
-{
-    $cmd_cp -r "etc/"* "$cfg_dir_rootfs/etc/"
-    $cmd_cp -r "sbin/"* "$cfg_dir_rootfs/sbin/"
-    $cmd_cp -r "lib/"* "$cfg_dir_rootfs/lib/"
-    $cmd_cp -r "$pkg_dir/fs/"* "$cfg_dir_rootfs/"
-}

rules/iw/fs/etc/check_wlan

@@ -1,46 +0,0 @@
-#!/bin/bash
-export PATH=/bin:/sbin:/usr/bin:/usr/sbin:/usr/bin:/bin
-
-############################# USER INPUT ###########################
-
-ip_dest=10.0.30.3
-
-####################################################################
-
-
-############### DON'T EDIT ##########################################
-
-check_interval=1
-log=/opt/.wifi.log
-wlan=wlan0
-eth=eth0
-
-exec 1> /dev/null
-exec 2>> $log
-echo $(date) > $log
-# without check_interval set, we risk a 0 sleep = busy loop
-if [ ! "$check_interval" ]; then
-        echo "No check interval set!" >> $log
-        exit 1
-fi
-
-startWifi () {
-   iw wlan0 connect LSTS >> $log
-}
-
-ifconfig $eth down
-ifconfig $wlan up
-
-while [ 1 ]; do
-        ping -q -c1 $ip_dest > /dev/null
-        if [ $? -ne 0 ]; then
-                echo $(date)" attempting restart..." >> $log
-                startWifi
-                sleep 1
-        else
-                echo "IS LINKED" >> $log
-                sleep $check_interval
-        fi
-done
-
-#####################################################################

rules/kmod/host.bash

@@ -16,5 +16,5 @@ build()
 host_install()
 {
     $cmd_make install &&
-    ln -fs ../bin/kmod "$cfg_dir_toolchain/sbin/depmod"
+    ln -fs kmod "$cfg_dir_toolchain/sbin/depmod"
 }

rules/kplex/default.bash

@@ -1,25 +0,0 @@
-version=\
-(
-    '1.4'
-)
-
-url=\
-(
-    "https://github.com/stripydog/kplex/archive/v$version.tar.gz"
-)
-
-md5=\
-(
-    'df198384d2d7dee4b802136f4f9e9d44'
-)
-
-build()
-{
-    cd ../kplex-$version && $cmd_make VERBOSE=1 CC="$cmd_target_cc"
-}
-
-target_install()
-{
-    $cmd_cp ../kplex-$version/kplex "$cfg_dir_rootfs/usr/bin/kplex"
-}
-

rules/libpng/default.bash

@@ -1,6 +1,6 @@
 version=\
 (
-    '1.6.23'
+    '1.6.19'
 )
 
 url=\
@@ -10,7 +10,7 @@ url=\
 
 md5=\
 (
-    '9b320a05ed4db1f3f0865c8a951fd9aa '
+    '1e6a458429e850fc93c1f3b6dc00a48f'
 )
 
 configure()

rules/linux-headers/cross.bash

@@ -1,16 +1,16 @@
 version=\
 (
-    '4.4.66'
+    '3.14.63'
 )
 
 url=\
 (
-    "https://www.kernel.org/pub/linux/kernel/v4.x/linux-$version.tar.xz"
+    "https://www.kernel.org/pub/linux/kernel/v3.x/linux-$version.tar.xz"
 )
 
 md5=\
 (
-    '5353de56bf4621a35afc4384c7e51f30'
+    '6cf8a6b23849f47f511e0e46cfdb6392'
 )
 
 maintainer=\

rules/linux/default.bash

@@ -1,16 +1,16 @@
 version=\
 (
-    '4.4.66'
+    '3.14.63'
 )
 
 url=\
 (
-    "https://www.kernel.org/pub/linux/kernel/v4.x/linux-$version.tar.xz"
+    "https://www.kernel.org/pub/linux/kernel/v3.x/linux-$version.tar.xz"
 )
 
 md5=\
 (
-    '5353de56bf4621a35afc4384c7e51f30'
+    '6cf8a6b23849f47f511e0e46cfdb6392'
 )
 
 maintainer=\
@@ -25,62 +25,13 @@ requires=\
     'lz4/host'
 )
 
-# This variable is updated by find_patches().
-patches=()
-
-# Major/Minor version.
-linux_mm_version()
-{
-    echo "$version" | cut -f1-2 -d.
-}
-
-# Major/Minor/Patch version.
-linux_mmp_version()
-{
-    echo "$version" | cut -f1 -d-
-}
-
-find_patches()
-{
-    patches=(\
-        $(ls -1 \
-             "$pkg_dir/patches/$version/"*.patch \
-             "$pkg_dir/patches/$(linux_mmp_version)/"*.patch \
-             "$pkg_dir/patches/$(linux_mm_version)/"*.patch \
-             "$cfg_dir_system/patches/linux/$version/"*.patch \
-             "$cfg_dir_system/patches/linux/$(linux_mmp_version)/"*.patch \
-             "$cfg_dir_system/patches/linux/$(linux_mm_version)/"*.patch \
-             2> /dev/null | awk '!a[$0]++')
-    )
-}
-
-find_patches
-
-# Get configuration file.
-linux_cfg_file()
-{
-    for f in "$version" "$(linux_mmp_version)" "$(linux_mm_version)"; do
-        f="$cfg_dir_system/cfg/linux-$f.cfg"
-        if [ -f "$f" ]; then
-            echo "$f"
-            return 0
-        fi
-
-        echo "Candidate kernel configuration file '$f' doesn't exist." 1>&2
-    done
-
-    echo "ERROR: failed to find a valid kernel configuration file." 1>&2
-    return 1
-}
-
 post_unpack()
 {
-    n=0; while [ -n "${patches[$n]}" ]; do
-             patch="${patches[$n]}"
-             echo "* Applying $patch..."
-             (ucat "$patch" | patch -p1) || return 1
-             let n++
-         done
+    patches=$(ls "$pkg_dir/patches/$version/"*.patch\
+	"$cfg_dir_system/patches/linux/$version/"*.patch 2>/dev/null)
+    if [ -n "$patches" ]; then
+        cat $patches | patch -p1
+    fi
 
     if [ -d "$cfg_dir_toolchain/firmware" ]; then
         tar -C "$cfg_dir_toolchain/firmware" -c -v -f - . | tar -C firmware -x -v -f -
@@ -90,7 +41,7 @@ post_unpack()
 refresh()
 {
     for rule in configure build target_install; do
-        if [ "$(linux_cfg_file)" -nt "$cfg_dir_builds/linux/$pkg_var/.$rule" ]; then
+        if [ "$cfg_dir_system/cfg/linux-${version}.cfg" -nt "$cfg_dir_builds/linux/$pkg_var/.$rule" ]; then
             rm "$cfg_dir_builds/linux/$pkg_var/.$rule"
         fi
     done
@@ -100,11 +51,9 @@ configure()
 {
     $cmd_make \
         ARCH=${cfg_target_linux} \
-        mrproper || return 1
+        mrproper &&
 
-    cfg="$(linux_cfg_file)"
-    [ -n "$cfg" ] || return 1
-    $cmd_cp "$cfg" .config || return 1
+    cp "$cfg_dir_system/cfg/linux-${version}.cfg" .config &&
 
     if [ -f "$cfg_dir_system/files/initramfs_init.sh" ]; then
         $cmd_mkdir initramfs &&
@@ -123,18 +72,17 @@ build()
 {
     $cmd_make \
         CROSS_COMPILE=$cfg_target_canonical- \
-        ARCH=$cfg_target_linux || return 1
-
+        ARCH=$cfg_target_linux &&
     $cmd_make \
         CROSS_COMPILE=$cfg_target_canonical- \
         ARCH=$cfg_target_linux \
-        modules || return 1
+        modules &&
 
     if [ "$(basename $cfg_target_linux_kernel)" = 'uImage' ]; then
         $cmd_make \
             CROSS_COMPILE=$cfg_target_canonical- \
             ARCH=$cfg_target_linux \
-            uImage || return 1
+            uImage
     fi
 
     # Compressed image.
@@ -142,7 +90,7 @@ build()
         $cmd_make \
             CROSS_COMPILE=$cfg_target_canonical- \
             ARCH=$cfg_target_linux \
-            zImage || return 1
+            zImage
     fi
 
     # Device tree blob.
@@ -150,7 +98,7 @@ build()
         $cmd_make \
             CROSS_COMPILE=$cfg_target_canonical- \
             ARCH=$cfg_target_linux \
-            dtbs || return 1
+            dtbs
     fi
 
     if [ -n "${cfg_target_linux_size}" ]; then
@@ -160,6 +108,15 @@ build()
     fi
 }
 
+host_install()
+{
+    # Device tree blobs.
+    if [ -n "$cfg_target_linux_dtb" ]; then
+        $cmd_mkdir "$cfg_dir_toolchain/boot" &&
+            cp -v "$(dirname $cfg_target_linux_dtb)/"*.dtb "$cfg_dir_toolchain/boot"
+    fi
+}
+
 target_install()
 {
     if [ -n "$(file "$cfg_target_linux_kernel" | grep ELF)" ]; then
@@ -175,31 +132,15 @@ target_install()
         return 1
     fi
 
-    # Device tree blobs.
-    dts="arch/$cfg_target_linux/boot/dts"
-    if [ -d "$dts" ]; then
-        $cmd_mkdir "$cfg_dir_rootfs/boot" &&
-            cp -v "$dts/"*.dtb "$cfg_dir_rootfs/boot"
-    fi
-
-    # Device tree overlays.
-    overlays_dir="arch/$cfg_target_linux/boot/dts/overlays"
-    if [ -d "$overlays_dir" ]; then
-	$cmd_mkdir "$cfg_dir_rootfs/boot/overlays" || return 1
-        $cmd_cp "$overlays_dir"/*.dtbo "$cfg_dir_rootfs/boot/overlays" || return 1
-    fi
-
     $cmd_make \
         CROSS_COMPILE="$cfg_target_canonical-" \
         ARCH="$cfg_target_linux" \
         INSTALL_MOD_PATH="$cfg_dir_rootfs/usr" \
-        KBUILD_VERBOSE=1 \
         modules_install
 
     $cmd_make \
         CROSS_COMPILE="$cfg_target_canonical-" \
         ARCH="$cfg_target_linux" \
         INSTALL_MOD_PATH="$cfg_dir_rootfs/usr" \
-        KBUILD_VERBOSE=1 \
         firmware_install
 }

rules/linux/rpi.bash

@@ -2,19 +2,21 @@
 
 version=\
 (
-    '4.4_2017-01-27'
+    '3.18_2015-06-03'
 )
 
 url=\
 (
-    "http://lsts.pt/glued/rpi-linux-$version.zip"
+    "https://github.com/rasmartins/rpi-linux/archive/rpi-linux-$version.tar.gz"
 )
 
 md5=\
 (
-    'f31d48a9d2c93509b35e750be489b44c'
+    '0b0255e50ca358b619bb78653ac2db2e'
 )
 
-build_dir="rpi-linux-rpi-linux-$version"
-
-find_patches
+post_unpack()
+{
+    rmdir "../linux-$version" &&
+        mv "../rpi-linux-rpi-linux-$version" "../linux-$version"
+}

rules/linux/rt.bash

@@ -1,27 +0,0 @@
-. "$cfg_dir_rules/$pkg/default.bash"
-
-version=\
-(
-    '4.4.66-rt79'
-)
-
-url=\
-(
-    "https://www.kernel.org/pub/linux/kernel/v4.x/linux-$(linux_mmp_version).tar.xz"
-    "https://www.kernel.org/pub/linux/kernel/projects/rt/$(linux_mm_version)/patch-$version.patch.gz"
-)
-
-md5=\
-(
-    'd68173a31fb60e2195a4015fe1f83e97'
-    '03be9388659d844c362e507ddba2d777'
-)
-
-maintainer=\
-(
-    'Ricardo Martins <rasm@oceanscan-mst.com>'
-)
-
-patches=("$cfg_dir_downloads/patch-$version.patch.gz" "${patches[@]}")
-
-build_dir="linux-$(linux_mmp_version)"

rules/linux/v3_14.bash

@@ -1,206 +0,0 @@
-version=\
-(
-    '3.14.63'
-)
-
-url=\
-(
-    "https://www.kernel.org/pub/linux/kernel/v3.x/linux-$version.tar.xz"
-)
-
-md5=\
-(
-    '6cf8a6b23849f47f511e0e46cfdb6392'
-)
-
-maintainer=\
-(
-    'Ricardo Martins <rasm@fe.up.pt>'
-)
-
-requires=\
-(
-    'bc/host'
-    'kmod/host'
-    'lz4/host'
-)
-
-# This variable is updated by find_patches().
-patches=()
-
-# Major/Minor version.
-linux_mm_version()
-{
-    echo "$version" | cut -f1-2 -d.
-}
-
-# Major/Minor/Patch version.
-linux_mmp_version()
-{
-    echo "$version" | cut -f1 -d-
-}
-
-find_patches()
-{
-    patches=(\
-        $(ls -1 \
-             "$pkg_dir/patches/$version/"*.patch \
-             "$pkg_dir/patches/$(linux_mmp_version)/"*.patch \
-             "$pkg_dir/patches/$(linux_mm_version)/"*.patch \
-             "$cfg_dir_system/patches/linux/$version/"*.patch \
-             "$cfg_dir_system/patches/linux/$(linux_mmp_version)/"*.patch \
-             "$cfg_dir_system/patches/linux/$(linux_mm_version)/"*.patch \
-             2> /dev/null | awk '!a[$0]++')
-    )
-}
-
-find_patches
-
-# Get configuration file.
-linux_cfg_file()
-{
-    for f in "$version" "$(linux_mmp_version)" "$(linux_mm_version)"; do
-        f="$cfg_dir_system/cfg/linux-$f.cfg"
-        if [ -f "$f" ]; then
-            echo "$f"
-            return 0
-        fi
-
-        echo "Candidate kernel configuration file '$f' doesn't exist." 1>&2
-    done
-
-    echo "ERROR: failed to find a valid kernel configuration file." 1>&2
-    return 1
-}
-
-post_unpack()
-{
-    cp -r ../linux-3.14.63/* ../linux_3.3-3.14.63
-    n=0; while [ -n "${patches[$n]}" ]; do
-             patch="${patches[$n]}"
-             echo "* Applying $patch..."
-             (ucat "$patch" | patch -p1) || return 1
-             let n++
-         done
-
-    if [ -d "$cfg_dir_toolchain/firmware" ]; then
-        tar -C "$cfg_dir_toolchain/firmware" -c -v -f - . | tar -C firmware -x -v -f -
-    fi
-}
-
-refresh()
-{
-    for rule in configure build target_install; do
-        if [ "$(linux_cfg_file)" -nt "$cfg_dir_builds/linux/$pkg_var/.$rule" ]; then
-            rm "$cfg_dir_builds/linux/$pkg_var/.$rule"
-        fi
-    done
-}
-
-configure()
-{
-    $cmd_make \
-        ARCH=${cfg_target_linux} \
-        mrproper || return 1
-
-    cfg="$(linux_cfg_file)"
-    [ -n "$cfg" ] || return 1
-    $cmd_cp "$cfg" .config || return 1
-
-    if [ -f "$cfg_dir_system/files/initramfs_init.sh" ]; then
-        $cmd_mkdir initramfs &&
-        $cmd_cp "$pkg_dir/files/initramfs.conf" . &&
-        $cmd_cp "$cfg_dir_system/files/initramfs_init.sh" initramfs/init.sh &&
-        $cmd_cp "$cfg_dir_rootfs/bin/busybox" initramfs/busybox
-    fi
-
-    yes '' | $cmd_make \
-        CROSS_COMPILE=${cfg_target_canonical}- \
-        ARCH=${cfg_target_linux} \
-        oldconfig
-}
-
-build()
-{
-    $cmd_make \
-        CROSS_COMPILE=$cfg_target_canonical- \
-        ARCH=$cfg_target_linux || return 1
-
-    $cmd_make \
-        CROSS_COMPILE=$cfg_target_canonical- \
-        ARCH=$cfg_target_linux \
-        modules || return 1
-
-    if [ "$(basename $cfg_target_linux_kernel)" = 'uImage' ]; then
-        $cmd_make \
-            CROSS_COMPILE=$cfg_target_canonical- \
-            ARCH=$cfg_target_linux \
-            uImage || return 1
-    fi
-
-    # Compressed image.
-    if [ "$(basename $cfg_target_linux_kernel)" = 'zImage' ]; then
-        $cmd_make \
-            CROSS_COMPILE=$cfg_target_canonical- \
-            ARCH=$cfg_target_linux \
-            zImage || return 1
-    fi
-
-    # Device tree blob.
-    if [ -n "$cfg_target_linux_dtb" ]; then
-        $cmd_make \
-            CROSS_COMPILE=$cfg_target_canonical- \
-            ARCH=$cfg_target_linux \
-            dtbs || return 1
-    fi
-
-    if [ -n "${cfg_target_linux_size}" ]; then
-        dd if="$cfg_target_linux_kernel" of="${cfg_target_linux_kernel}.padded" \
-            ibs="${cfg_target_linux_size}" conv=sync &&
-        mv "${cfg_target_linux_kernel}.padded" "${cfg_target_linux_kernel}"
-    fi
-}
-
-target_install()
-{
-    if [ -n "$(file "$cfg_target_linux_kernel" | grep ELF)" ]; then
-        strip="$(echo $cfg_dir_toolchain/bin/*-strip)"
-        $strip -s -R .comment "$cfg_target_linux_kernel"
-    fi
-
-    # Kernel image.
-    if [ -n "$cfg_target_linux_kernel" ]; then
-        cp -v "$cfg_target_linux_kernel" "$cfg_dir_rootfs/boot/kernel"
-    else
-        echo "ERROR: failed to find kernel image at '$cfg_target_linux_kernel'"
-        return 1
-    fi
-
-    # Device tree blobs.
-    dts="arch/$cfg_target_linux/boot/dts"
-    if [ -d "$dts" ]; then
-        $cmd_mkdir "$cfg_dir_rootfs/boot" &&
-            cp -v "$dts/"*.dtb "$cfg_dir_rootfs/boot"
-    fi
-
-    # Device tree overlays.
-    overlays_dir="arch/$cfg_target_linux/boot/dts/overlays"
-    if [ -d "$overlays_dir" ]; then
-	$cmd_mkdir "$cfg_dir_rootfs/boot/overlays" || return 1
-        $cmd_cp "$overlays_dir"/*.dtbo "$cfg_dir_rootfs/boot/overlays" || return 1
-    fi
-
-    $cmd_make \
-        CROSS_COMPILE="$cfg_target_canonical-" \
-        ARCH="$cfg_target_linux" \
-        INSTALL_MOD_PATH="$cfg_dir_rootfs/usr" \
-        KBUILD_VERBOSE=1 \
-        modules_install
-
-    $cmd_make \
-        CROSS_COMPILE="$cfg_target_canonical-" \
-        ARCH="$cfg_target_linux" \
-        INSTALL_MOD_PATH="$cfg_dir_rootfs/usr" \
-        KBUILD_VERBOSE=1 \
-        firmware_install
-}

rules/lpg/default.bash

@@ -1,38 +0,0 @@
-version=\
-(
-	   "1.2"
-)
-
-url=\
-(
-    "http://lsts.pt/glued/lpg-$version.tar.gz"
-)
-
-md5=\
-(
-    "d71e2f282372a5cb1021d9e457a3d53f"
-)
-
-requires=\
-(
-    'bison/host'
-    'flex/host'
-)
-
-configure()
-{
-    ./configure "$cfg_target_canonical-gcc"
-}
-
-build()
-{
-    $cmd_make \
-	BISON="$cfg_dir_toolchain/bin/bison" \
-	FLEX="$cfg_dir_toolchain/bin/flex"
-    
-}
-
-target_install()
-{
-    $cmd_cp "lpg" "$cfg_dir_rootfs/usr/bin"
-}

rules/memtest86+/default.bash

@@ -1,32 +0,0 @@
-version=\
-(
-    "5.01"
-)
-
-url=\
-(
-    "http://www.lsts.pt/glued/memtest86+-$version.tar.gz"
-)
-
-md5=\
-(
-    "035b85f2edabc9b4a6b0cf6c9c3acf50"
-)
-
-maintainer=\
-(
-    'Tiago Sá Marques <tsmarques@fe.up.pt>'
-)
-
-build()
-{
-    $cmd_make \
-        CC=$cmd_target_cc \
-        CXX=$cmd_target_cxx
-}
-
-target_install()
-{
-    $cmd_cp ./memtest.bin $cfg_dir_rootfs/boot/
-    tar -C "$pkg_dir/fs" --exclude .svn -c -f - . | tar -C "$cfg_dir_rootfs" -x -v -f -
-}

rules/memtest86+/fs/usr/bin/start-memtest

@@ -1,14 +0,0 @@
-#! /bin/sh
-
-echo "Starting memtest in 10 seconds (requires reboot), Ctrl-C to cancel..."
-for r in 0 1 2 3 4 5 6 7 8 9; do
-    printf "."
-    sleep 1
-done
-
-mount -o remount,rw /
-extlinux -o "memtest" /boot/extlinux/
-mount -o remount,ro /
-
-echo "* Rebooting now"
-reboot

rules/necsave/default.bash

@@ -0,0 +1,79 @@
+version=\
+(
+    'master'
+)
+
+branch=\
+(
+    'master'
+)
+
+maintainer=\
+(
+    "Jose Pinto <zepinto@fe.up.pt>"
+)
+
+requires=\
+(
+    'jansson/default'
+    'czmq/default'
+    'boost/default'
+    'cmake/host'
+    'dune/default'
+)
+
+download()
+{
+    git clone -b $branch "git@necsave.info:necsave/communications.git" source &&
+    cd source && 
+    ./update.sh &&
+    cd -
+}
+
+configure()
+{
+    $cmd_mkdir build && cd build
+    PKG_CONFIG_PATH="$cfg_dir_toolchain_sysroot/usr/lib/pkgconfig" \
+    cmake \
+        -DCMAKE_INSTALL_PREFIX="$cfg_dir_toolchain_sysroot/usr/necsave" \
+        -DCMAKE_CXX_COMPILER="$cmd_target_cxx" \
+        -DCMAKE_C_COMPILER="$cmd_target_cc" \
+        -DCMAKE_FIND_ROOT_PATH:PATH="$cfg_dir_toolchain_sysroot/usr" \
+        -DDUNE_HOME="$cfg_dir_toolchain_sysroot/usr" \
+        -DCMAKE_SYSTEM_NAME:STRING=Linux \
+        -DCMAKE_FIND_ROOT_PATH_MODE_INCLUDE:STRING=BOTH \
+        -DCMAKE_FIND_ROOT_PATH_MODE_LIBRARY:STRING=ONLY \
+        -DCMAKE_FIND_ROOT_PATH_MODE_PROGRAM:STRING=BOTH \
+        ../source
+}
+
+refresh()
+{
+  cd ../default
+  rm .build .host_install .target_install .postconfigure
+  cd -
+  cd integration && git pull && cd - &&
+  cd source && git pull && cd - &&
+  for r in duneplatform missionplanner perception vehicleplanner; do
+            cd "source/src/Modules/$r" && git pull && cd -
+        done
+}
+
+build()
+{
+    $cmd_make -C build
+}
+
+host_install()
+{
+    $cmd_make -C build install
+}
+
+#target_install()
+#{
+#    rm -rf "$cfg_dir_rootfs/usr/necsave" &&
+#        $cmd_cp -r "$cfg_dir_toolchain_sysroot/usr/necsave" "$cfg_dir_rootfs/usr" &&
+#        ln -fs /opt/lsts/necsave/log "$cfg_dir_rootfs/usr/necsave/log" &&
+#    $cmd_cp -r "integration/REP16"/* "$cfg_dir_rootfs/usr/necsave"
+#
+#}

rules/opencv/default.bash

@@ -1,6 +1,6 @@
 version=\
 (
-    "2.4.13"
+    "2.4.11"
 )
 
 url=\
@@ -10,7 +10,7 @@ url=\
 
 md5=\
 (
-    '886b0c511209b2f3129649928135967c'
+    '32f498451bff1817a60e1aabc2939575'
 )
 
 requires=\
@@ -63,11 +63,6 @@ host_install()
 {
     cd  ${pkg_build_dir}/../build &&
     $cmd_make install
-
-    # make available for cross compilation
-    for f in "$cfg_dir_toolchain_sysroot/usr/lib/"libopencv*so*; do
-       ln -s -f "$f" "$cfg_dir_toolchain/lib"
-    done
 }
 
 target_install()

rules/openssh/default.bash

@@ -30,7 +30,6 @@ configure()
         --target="$cfg_target_canonical" \
         --host="$cfg_target_canonical" \
         --build="$cfg_host_canonical" \
-        --with-privsep-path=$cfg_dir_rootfs/var/empty \
         --disable-strip
         
 }

rules/perf/default.bash

@@ -1,46 +0,0 @@
-version=\
-(
-    "3.19"
-)
-
-url=\
-(
-       "https://www.kernel.org/pub/linux/kernel/v3.x/linux-$version.tar.xz"
-)
-
-requires=\
-(
-    'flex/host'
-    'bison/host'
-    'zlib/default'
-)
-
-# v3.19
-md5=\
-(
-       'd3fc8316d4d4d04b65cbc2d70799e763'
-)
-
-#3.14.63
-# md5=('6cf8a6b23849f47f511e0e46cfdb6392')
-
-build()
-{
-    
-    cd ../linux-$version/
-    $cmd_make \
-	CROSS_COMPILE="$cfg_target_canonical-" \
-	ARCH="$cfg_target_linux" \
-	INSTALL_MOD_PATH="$cfg_dir_rootfs/usr" \
-	KBUILD_VERBOSE=1 \
-	DEPMOD="$cfg_dir_toolchain/sbin/depmod" \
-	NO_LIBELF=1 \
-	LDFLAGS=-static \
-	-C "./tools/perf/"
-}
-
-target_install()
-{
-    $cmd_cp ../linux-$version/tools/perf/perf \
-	    $cfg_dir_rootfs/usr/bin/
-}

rules/raspicam/default.bash

@@ -1,60 +0,0 @@
-version=\
-(
-    "1.0.0"
-)
-
-url=\
-(
-    "http://lsts.pt/glued/raspicam-$version.zip"
-)
-
-md5=\
-(
-  "169e62fd17d41455a42711a2f9c54fd1"
-)
-
-maintainer=\
-(
-    'Pedro Gonçalves <pedro@lsts.pt>'
-)
-
-requires=\
-(
-    'uv4l/default'
-    'cmake/host'
-)
-
-configure()
-{
-    LINKER_ADDED_FLAGS="-Wl,-rpath,${cfg_dir_rootfs}/usr/lib"
-
-    ${cfg_dir_toolchain}/usr/local/bin/cmake \
-        -DCMAKE_SYSTEM_NAME="Linux" \
-        -DCMAKE_SYSTEM_VERSION="1" \
-        -DCMAKE_FIND_ROOT_PATH="${cfg_dir_toolchain_sysroot}/usr ${cfg_dir_rootfs}/usr" \
-        -DCMAKE_FIND_ROOT_PATH_MODE_INCLUDE=ONLY \
-        -DCMAKE_FIND_ROOT_PATH_MODE_LIBRARY=ONLY \
-        -DCMAKE_C_COMPILER="${cmd_target_cc}" \
-        -DCMAKE_CXX_COMPILER="${cmd_target_cxx}" \
-        -DCMAKE_C_FLAGS="${cfg_target_gcc_flags}" \
-	.
-}
-
-build()
-{
-    $cmd_make VERBOSE=1
-}
-
-host_install()
-{
-    cd build/
-    $cmd_cp -r "lib/"* "$cfg_dir_toolchain_sysroot/usr/lib/"
-    $cmd_cp -r "inc/"* "$cfg_dir_toolchain_sysroot/usr/include/"
-}
-
-target_install()
-{
-    cd build/
-    $cmd_cp -r "lib/"* "$cfg_dir_rootfs/usr/lib/"
-    $cmd_cp -r "bin/"* "$cfg_dir_rootfs/usr/bin/"
-}

rules/rpi-boot-firmware/default.bash

@@ -1,29 +1,31 @@
 version=\
 (
-    '2017-02-02'
+    '2015-06-03'
 )
 
 url=\
 (
-    "http://lsts.pt/glued/rpi-boot-firmware-$version.zip"
+    "https://github.com/rasmartins/rpi-boot-firmware/archive/rpi-boot-firmware-$version.tar.gz"
 )
 
 maintainer=\
 (
     'Ricardo Martins <rasm@fe.up.pt>'
-    'Pedro Gonçalves <pedro@lsts.pt>'
 )
 
 md5=\
 (
-    'eb42664fce4d73f167064e697dfacb76'
+    'a80ee36b66cccda4e9ccb7eb26bd6bb8'
 )
 
 target_install()
 {
-    $cmd_mkdir "$cfg_dir_rootfs/boot"
+    $cmd_mkdir \
+        "$cfg_dir_rootfs/boot" &&
 
-    $cmd_cp "../$pkg-$version/"* "$cfg_dir_rootfs/boot/"
+    for f in bootcode.bin fixup.dat start.elf; do
+        $cmd_cp -r "../$pkg-$pkg-$version/$f" "$cfg_dir_rootfs/boot"
+    done &&
 
     tar -C "$pkg_dir/fs" -c -f - . | tar -C "$cfg_dir_rootfs" -x -v -f -
 }

rules/rpi-boot-firmware/fs/boot/cmdline.txt

@@ -1 +1 @@
-dwc_otg.lpm_enable=0 console=tty1 root=/dev/mmcblk0p2 elevator=deadline rootwait quiet
+dwc_otg.lpm_enable=0 console=ttyAMA0,115200,8n1 root=/dev/mmcblk0p2 elevator=deadline rootwait quiet

rules/rpi-boot-firmware/fs/boot/config.txt

@@ -0,0 +1 @@
+arm_freq=1000

rules/rt-tests/default.bash

@@ -1,32 +0,0 @@
-version=\
-(
-    '0.96'
-)
-
-url=\
-(
-    "https://www.kernel.org/pub/linux/utils/rt-tests/rt-tests-$version.tar.gz"
-)
-
-md5=\
-(
-    '590b2340f66993a978d9806a734d5ea8'
-)
-
-maintainer=\
-(
-    'Kristian Klausen <kristian.klausen@itk.ntnu.no>'
-)
-
-build()
-{
-    $cmd_make \
-	CC=$cmd_target_cc cyclictest \
-	CFLAGS="$cfg_target_gcc_flags" 
-}
-
-target_install()
-{
-    cp -a cyclictest "$cfg_dir_rootfs/usr/bin/" &&
-    $cmd_target_strip "$cfg_dir_rootfs/usr/bin/cyclictest"
-}

rules/rtklib/default.bash

@@ -34,7 +34,7 @@ build()
     cd app/str2str/gcc
     $cmd_make \
 	CC=$cmd_target_cc \
-	CTARGET="${cfg_target_gcc_flags} -DSVR_REUSEADDR" \
+	CTARGET="$cfg_target_gcc_flags" \
 	BINDIR="${cfg_dir_toolchain_sysroot}/usr/bin" 
 	
     cd ../../rtkrcv/gcc

rules/syslinux/extlinux.conf

@@ -1,6 +1,3 @@
 LABEL linux
    KERNEL /boot/kernel
    APPEND rootwait root=$cfg_kernel_boot_dev rootfstype=ext2 ro $cfg_kernel_extra_args
-
-LABEL memtest
-   LINUX /boot/memtest.bin

rules/u-boot/default.bash

@@ -43,11 +43,11 @@ host_install()
 
 target_install()
 {
-    $cmd_mkdir "$cfg_dir_rootfs/boot"
+    if [ -f MLO ]; then
+        $cmd_cp MLO "$cfg_dir_rootfs/boot"
+    fi
 
-    for f in MLO u-boot.img u-boot.bin; do
-        if [ -f "$f" ]; then
-            $cmd_cp "$f" "$cfg_dir_rootfs/boot"
-        fi
-    done
+    if [ -f u-boot.img ]; then
+        $cmd_cp u-boot.img "$cfg_dir_rootfs/boot"
+    fi
 }

rules/util-linux/host.bash

@@ -8,7 +8,6 @@ requires=\
 configure()
 {
     cd "$pkg_build_dir" &&
-    CFLAGS="-I$cfg_dir_toolchain/include" \
     "../util-linux-$version/configure" \
         --prefix="$cfg_dir_toolchain" \
         --disable-wall \

rules/uv4l/default.bash

@@ -1,41 +0,0 @@
-version=\
-(
-  "1.0.0"
-)
-
-url=\
-(
-  "http://lsts.pt/glued/uv4l.$version.tar.bz2"
-)
-
-md5=\
-(
-  "869e884accbfa9c2356e2fd9307dd71c"
-)
-
-maintainer=\
-(
-    'Pedro Gonçalves <pedro@lsts.pt>'
-)
-
-post_unpack()
-{
-    mv "../etc" "../uv4l-$version/"
-    mv "../usr" "../uv4l-$version/"
-}
-
-host_install()
-{
-  $cmd_cp -r "usr/lib/"*    "$cfg_dir_toolchain_sysroot/usr/lib/"
-  $cmd_cp -r "usr/include/"* "$cfg_dir_toolchain_sysroot/usr/include/"
-}
-
-target_install()
-{
-    $cmd_cp -r "usr/lib/"* "$cfg_dir_rootfs/usr/lib/"
-    $cmd_cp -r "usr/bin/"* "$cfg_dir_rootfs/usr/bin/"
-
-    tar -C "$pkg_dir/fs" -c -f - . | tar -C "$cfg_dir_rootfs" -x -v -f -
-}
-
-

rules/uv4l/fs/etc/rc.d/raspicam

@@ -1,28 +0,0 @@
-start()
-{
-    killall uv4l
-    modprobe cuse &&
-	uv4l \
-	    -nopreview \
-	    --auto-video_nr \
-	    --driver raspicam \
-	    --encoding h264 \
-	    --width 1080 \
-	    --height 720 \
-	    --framerate 20 \
-	    --quality 10 \
-	    --server-option \
-	    --port=9090 \
-	    --server-option \
-	    --max-queued-connections=30 \
-	    --server-option \
-	    --max-streams=25 \
-	    --server-option \
-	    --max-threads=29
-}
-
-stop()
-{
-    killall uv4l
-    rmmod uv4l
-}

rules/zerotier/default.bash

@@ -1,34 +0,0 @@
-version=\
-(
-    '1.4.2'
-)
-
-url=\
-(
-    "https://github.com/zerotier/ZeroTierOne/archive/$version.tar.gz"
-)
-
-md5=\
-(
-    'c173f8b61bcdb23844a2669ff0d7bdf0'
-)
-
-build()
-{
-    cd ../ZeroTierOne-$version && $cmd_make \
-                VERBOSE=1 \
-                CC="$cmd_target_cc" \
-                CXX="$cmd_target_cxx" \
-		        LD="$cmd_target_ld" \
-                STRIP="$cmd_target_strip" \
-                CC_FLAGS="$cfg_target_gcc_flags"
-
-}
-
-target_install()
-{
-    $cmd_cp "../ZeroTierOne-$version/zerotier-one" "$cfg_dir_rootfs/usr/bin/zerotier-one"
-    ln -sf "$cfg_dir_rootfs/usr/bin/zerotier-one" "$cfg_dir_rootfs/usr/bin/zerotier-cli"
-    ln -sf "$cfg_dir_rootfs/usr/bin/zerotier-one" "$cfg_dir_rootfs/usr/bin/zerotier-idtool"
-}
-

systems/lauv-aux-rpi/config

@@ -6,12 +6,13 @@ cfg_services1='lauv-storage-server'
 cfg_services2='dune'
 cfg_packages='dropbear rsync busybox e2fsprogs dosfstools ptpd rpcbind nfs-utils rpi-boot-firmware linux/rpi'
 cfg_target_linux_kernel='arch/arm/boot/zImage'
+cfg_target_linux_dtb='arch/arm/boot/dts/bcm2709-rpi-2-b.dtb'
 cfg_ptpd_interface='eth0'
 cfg_terminal='ttyAMA0'
 cfg_lauv_storage_dir='/opt/lsts/dune/log'
 cfg_partitions=\
 (
-    rpi-boot BOOT0  512B    32MiB
+    rpi-boot boot0  512B    32MiB
     root     root0  32MiB   544MiB
     data     data0  544MiB  -1
 )

systems/lauv-aux-rpi/fs/boot/config.txt

@@ -1,9 +0,0 @@
-# Core.
-arm_freq=1000
-
-# Disable BT on Rpi3.
-dtoverlay=pi3-disable-bt
-
-# Enable RasPicam
-start_x=1
-gpu_mem=128

systems/lauv-aux-rpi/lauv-arpao-aux.cfg

@@ -1,2 +0,0 @@
-cfg_hostname='lauv-arpao-aux'
-cfg_eth_ext_ip='10.0.10.63'

systems/lauv-aux-rpi/lauv-aux-rpi-testbed.cfg

@@ -3,4 +3,3 @@ cfg_eth_ext_ip='10.0.200.24'
 cfg_eth_ext_mk='255.255.0.0'
 cfg_eth_ext_gw='10.0.0.1'
 cfg_ptpd_interface='eth0'
-cfg_services1=''

systems/lauv-aux-rpi/lauv-blue.cfg

@@ -1,6 +0,0 @@
-cfg_hostname='lauv-blue'
-cfg_eth_ext_ip='10.0.2.55'
-cfg_eth_ext_mk='255.255.0.0'
-cfg_eth_ext_gw='10.0.0.1'
-cfg_ptpd_interface='eth0'
-cfg_services1=''

systems/lauv-aux-rpi/lauv-nemo-1-aux.cfg

@@ -1,3 +0,0 @@
-cfg_hostname='lauv-nemo-1-aux'
-cfg_eth_ext_ip='10.0.10.63'
-cfg_packages="$cfg_packages boost"

systems/lauv-aux-rpi/lauv-xplore-1-aux.cfg

@@ -6,5 +6,5 @@ cfg_ptpd_interface='eth0'
 cfg_services0='network dropbear storage upgrade syslog ptpd'
 cfg_services1=''
 cfg_services2='trex'
-cfg_packages='dropbear rsync busybox e2fsprogs dosfstools ptpd rpcbind nfs-utils rpi-boot-firmware linux/rpi libantlr3c boost'
+cfg_packages='dropbear rsync busybox e2fsprogs dosfstools ptpd rpcbind nfs-utils rpi-boot-firmware linux/rpi libantlr3c boost europa'
 

systems/lauv-aux-rpi/lauv-xplore-2-aux.cfg

@@ -6,5 +6,5 @@ cfg_ptpd_interface='eth0'
 cfg_services0='network dropbear storage upgrade syslog ptpd'
 cfg_services1=''
 cfg_services2='trex'
-cfg_packages='dropbear rsync busybox e2fsprogs dosfstools ptpd rpcbind nfs-utils rpi-boot-firmware linux/rpi libantlr3c boost'
+cfg_packages='dropbear rsync busybox e2fsprogs dosfstools ptpd rpcbind nfs-utils rpi-boot-firmware linux/rpi libantlr3c boost europa'
 

systems/lauv-aux-rpi/lauv-xplore-4-aux.cfg

@@ -1,10 +0,0 @@
-cfg_hostname='lauv-xplore-4-aux'
-cfg_eth_ext_ip='10.0.10.153'
-cfg_eth_ext_mk='255.255.0.0'
-cfg_eth_ext_gw='10.0.0.1'
-cfg_ptpd_interface='eth0'
-cfg_services0='network dropbear storage upgrade syslog ptpd'
-cfg_services1=''
-cfg_services2='trex'
-cfg_packages='dropbear rsync busybox e2fsprogs dosfstools ptpd rpcbind nfs-utils rpi-boot-firmware linux/rpi libantlr3c boost'
-

systems/lauv-aux-rpi/lauv-xplore-5-aux.cfg

@@ -1,10 +0,0 @@
-cfg_hostname='lauv-xplore-5-aux'
-cfg_eth_ext_ip='10.0.10.163'
-cfg_eth_ext_mk='255.255.0.0'
-cfg_eth_ext_gw='10.0.0.1'
-cfg_ptpd_interface='eth0'
-cfg_services0='network dropbear storage upgrade syslog ptpd'
-cfg_services1=''
-cfg_services2='trex'
-cfg_packages='dropbear rsync busybox e2fsprogs dosfstools ptpd rpcbind nfs-utils rpi-boot-firmware linux/rpi libantlr3c boost'
-

systems/lauv-aux-rpi/lauv-xtreme-2-aux.cfg

@@ -3,3 +3,5 @@ cfg_eth_ext_ip='10.0.10.53'
 cfg_eth_ext_mk='255.255.0.0'
 cfg_eth_ext_gw='10.0.0.1'
 cfg_ptpd_interface='eth0'
+cfg_lauv_storage='internal'
+cfg_packages="$cfg_packages necsave"

systems/lauv-aux-rpi/necsave-aux.cfg

@@ -1,10 +1,9 @@
-cfg_hostname='lauv-xplore-3-aux'
-cfg_eth_ext_ip='10.0.10.143'
+cfg_hostname='lauv-xplore-2-aux'
+cfg_eth_ext_ip='10.0.10.183'
 cfg_eth_ext_mk='255.255.0.0'
 cfg_eth_ext_gw='10.0.0.1'
 cfg_ptpd_interface='eth0'
 cfg_services0='network dropbear storage upgrade syslog ptpd'
 cfg_services1=''
 cfg_services2='trex'
-cfg_packages='dropbear rsync busybox e2fsprogs dosfstools ptpd rpcbind nfs-utils rpi-boot-firmware linux/rpi libantlr3c boost'
-
+cfg_packages='dropbear rsync busybox e2fsprogs dosfstools ptpd rpcbind nfs-utils rpi-boot-firmware linux/rpi libantlr3c jansson zeromq czmq boost europa'

systems/lctr-a6xx/buv-petinga-1.cfg

@@ -1,2 +0,0 @@
-cfg_hostname='buv-petinga-1'
-cfg_eth_ext_ip='10.0.10.170'

systems/lctr-a6xx/caravela.cfg

@@ -1,4 +1,2 @@
 cfg_hostname='caravela'
 cfg_eth_ext_ip='10.0.10.40'
-cfg_packages="$cfg_packages ppp iptables"
-cfg_modules="$cfg_modules ftdi_sio"

systems/lctr-a6xx/cfg/linux-3.14.63.cfg

@@ -136,7 +136,7 @@ CONFIG_HAVE_PCSPKR_PLATFORM=y
 CONFIG_EXPERT=y
 # CONFIG_UID16 is not set
 # CONFIG_SYSCTL_SYSCALL is not set
-CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS is not set
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
@@ -1529,7 +1529,7 @@ CONFIG_USB_SERIAL_GENERIC=y
 # CONFIG_USB_SERIAL_CP210X is not set
 # CONFIG_USB_SERIAL_CYPRESS_M8 is not set
 # CONFIG_USB_SERIAL_EMPEG is not set
-CONFIG_USB_SERIAL_FTDI_SIO=m
+CONFIG_USB_SERIAL_FTDI_SIO=y
 # CONFIG_USB_SERIAL_VISOR is not set
 # CONFIG_USB_SERIAL_IPAQ is not set
 # CONFIG_USB_SERIAL_IR is not set
@@ -1900,7 +1900,7 @@ CONFIG_DEFAULT_MESSAGE_LOGLEVEL=4
 #
 # Compile-time checks and compiler options
 #
-CONFIG_DEBUG_INFO=y
+# CONFIG_DEBUG_INFO is not set
 # CONFIG_ENABLE_WARN_DEPRECATED is not set
 # CONFIG_ENABLE_MUST_CHECK is not set
 CONFIG_FRAME_WARN=2048
@@ -2209,3 +2209,4 @@ CONFIG_ARCH_HAS_ATOMIC64_DEC_IF_POSITIVE=y
 # CONFIG_AVERAGE is not set
 # CONFIG_CORDIC is not set
 # CONFIG_DDR is not set
+

systems/lctr-a6xx/config

@@ -4,7 +4,7 @@ cfg_services0='dropbear network storage upgrade syslog escc ptpd setserial'
 cfg_services1=''
 cfg_services2='dune'
 cfg_modules=''
-cfg_packages='coreboot-lsts emm-8p-xt-eeprom zlib dropbear rsync busybox flashrom e2fsprogs socat linux escc syslinux syslinux/host ptpd ntp uswitch pciutils bzip2 memtest86+'
+cfg_packages='coreboot-lsts emm-8p-xt-eeprom zlib dropbear rsync busybox flashrom e2fsprogs socat linux escc syslinux syslinux/host ptpd ntp uswitch pciutils bzip2'
 cfg_terminal='ttyS0'
 cfg_target_linux_kernel='arch/x86/boot/bzImage'
 cfg_ptpd_master='true'
@@ -12,5 +12,5 @@ cfg_ptpd_interface='eth0'
 cfg_eth_ext_mk='255.255.0.0'
 cfg_eth_ext_gw='10.0.0.1'
 cfg_eth_prv_ip='192.168.0.1'
-cfg_escc_script=''
+cfg_escc_script='/etc/escc/hg1700.sh'
 cfg_kernel_extra_args='panic=5 quiet'

systems/lctr-a6xx/geode-testbed.cfg

@@ -1,2 +0,0 @@
-cfg_hostname='geode-testbed'
-cfg_eth_ext_ip='10.0.200.64'

systems/lctr-a6xx/lauv-arpao.cfg

@@ -1,2 +0,0 @@
-cfg_hostname='lauv-arpao'
-cfg_eth_ext_ip='10.0.10.60'

systems/lctr-a6xx/lauv-nemo-1.cfg

@@ -1,2 +0,0 @@
-cfg_hostname='lauv-nemo-1'
-cfg_eth_ext_ip='10.0.10.60'

systems/lctr-a6xx/lauv-xplore-1.cfg

@@ -1,3 +1,2 @@
 cfg_hostname='lauv-xplore-1'
 cfg_eth_ext_ip='10.0.10.120'
-cfg_modules="$cfg_modules ftdi_sio"

systems/lctr-a6xx/lauv-xplore-2.cfg

@@ -1,2 +1,4 @@
 cfg_hostname='lauv-xplore-2'
 cfg_eth_ext_ip='10.0.10.130'
+cfg_packages="$cfg_packages necsave"
+

systems/lctr-a6xx/lauv-xplore-3.cfg

@@ -1,2 +0,0 @@
-cfg_hostname='lauv-xplore-3'
-cfg_eth_ext_ip='10.0.10.140'

systems/lctr-a6xx/lauv-xplore-4.cfg

@@ -1,2 +0,0 @@
-cfg_hostname='lauv-xplore-4'
-cfg_eth_ext_ip='10.0.10.150'

systems/lctr-a6xx/lauv-xplore-5.cfg

@@ -1,2 +0,0 @@
-cfg_hostname='lauv-xplore-5'
-cfg_eth_ext_ip='10.0.10.160'

systems/lctr-a6xx/lauv-xtreme-2.cfg

@@ -1,9 +1,3 @@
 cfg_hostname='lauv-xtreme-2'
 cfg_eth_ext_ip='10.0.10.50'
-cfg_packages="$cfg_packages rpcbind nfs-utils"
-cfg_services1='lauv-storage-client'
-cfg_lauv_storage_host='10.0.10.53'
-cfg_lauv_storage_paths='/opt/lsts/dune/log'
-cfg_lauv_storage_timeout=60
 cfg_escc_script='/etc/escc/hg1700-psimar.sh'
-cfg_dune_i18n='C'

systems/lctr-a6xx/patches/linux/4.4.66/00-aim104-com8.patch

@@ -1,85 +0,0 @@
-diff -Nru a/drivers/tty/serial/8250/8250_aim104_com8.c b/drivers/tty/serial/8250/8250_aim104_com8.c
---- a/drivers/tty/serial/8250/8250_aim104_com8.c
-+++ b/drivers/tty/serial/8250/8250_aim104_com8.c
-@@ -0,0 +1,51 @@
-+#include <linux/module.h>
-+#include <linux/init.h>
-+#include <linux/serial_8250.h>
-+
-+#define PORT(_base,_irq)				\
-+	{						\
-+		.iobase		= _base,		\
-+		.irq		= _irq,			\
-+		.uartclk	= 1843200,		\
-+		.iotype		= UPIO_PORT,		\
-+		.flags		= UPF_BOOT_AUTOCONF | UPF_BUGGY_UART,	\
-+	}
-+
-+static struct plat_serial8250_port aim104_data[] = {
-+	PORT(0x100, 10),
-+	PORT(0x108, 10),
-+	PORT(0x110, 10),
-+	PORT(0x118, 10),
-+	PORT(0x120, 10),
-+	PORT(0x128, 10),
-+	PORT(0x130, 10),
-+	PORT(0x138, 10),
-+	PORT(0x300, 6),
-+	PORT(0x308, 6),
-+	PORT(0x310, 6),
-+	PORT(0x318, 6),
-+	PORT(0x320, 6),
-+	PORT(0x328, 6),
-+	PORT(0x330, 6),
-+	PORT(0x338, 6),
-+	{ },
-+};
-+
-+static struct platform_device exar_device = {
-+	.name			= "serial8250",
-+	.id			= PLAT8250_DEV_PLATFORM,
-+	.dev			= {
-+		.platform_data	= aim104_data,
-+	},
-+};
-+
-+static int __init exar_init(void)
-+{
-+	return platform_device_register(&exar_device);
-+}
-+
-+module_init(exar_init);
-+
-+MODULE_AUTHOR("Ricardo Martins");
-+MODULE_DESCRIPTION("8250 serial probe module for Eurotech AIM104-COM8");
-+MODULE_LICENSE("GPL");
-diff -Nru a/drivers/tty/serial/8250/Kconfig b/drivers/tty/serial/8250/Kconfig
---- a/drivers/tty/serial/8250/Kconfig
-+++ b/drivers/tty/serial/8250/Kconfig
-@@ -225,6 +225,15 @@ config SERIAL_8250_EXAR_ST16C554
- 	  To compile this driver as a module, choose M here: the module
- 	  will be called 8250_exar_st16c554.
-
-+config SERIAL_8250_AIM104_COM8
-+	tristate "Support Eurotech AIM104-COM8 Dual Quad UART"
-+	depends on SERIAL_8250 != n && ISA && SERIAL_8250_MANY_PORTS
-+	help
-+	  Eurotech AIM104-COM8 Dual Quad UART.
-+
-+	  To compile this driver as a module, choose M here: the module
-+	  will be called 8250_aim104_com8.
-+
- config SERIAL_8250_HUB6
- 	tristate "Support Hub6 cards"
- 	depends on SERIAL_8250 != n && ISA && SERIAL_8250_MANY_PORTS
-diff -Nru a/drivers/tty/serial/8250/Makefile b/drivers/tty/serial/8250/Makefile
---- a/drivers/tty/serial/8250/Makefile
-+++ b/drivers/tty/serial/8250/Makefile
-@@ -17,6 +17,7 @@ obj-$(CONFIG_SERIAL_8250_FOURPORT)	+= 8250_fourport.o
- obj-$(CONFIG_SERIAL_8250_ACCENT)	+= 8250_accent.o
- obj-$(CONFIG_SERIAL_8250_BOCA)		+= 8250_boca.o
- obj-$(CONFIG_SERIAL_8250_EXAR_ST16C554)	+= 8250_exar_st16c554.o
-+obj-$(CONFIG_SERIAL_8250_AIM104_COM8)	+= 8250_aim104_com8.o
- obj-$(CONFIG_SERIAL_8250_HUB6)		+= 8250_hub6.o
- obj-$(CONFIG_SERIAL_8250_MCA)		+= 8250_mca.o
- obj-$(CONFIG_SERIAL_8250_FSL)		+= 8250_fsl.o

systems/lctr-a6xx/patches/linux/4.4.66/90-st16654-fifo-trigger-16.patch

@@ -1,14 +0,0 @@
-diff --git a/drivers/tty/serial/8250/8250_port.c b/drivers/tty/serial/8250/8250_port.c
-index 52d82d2..613c7e9 100644
---- a/drivers/tty/serial/8250/8250_port.c
-+++ b/drivers/tty/serial/8250/8250_port.c
-@@ -132,8 +132,7 @@ static const struct serial8250_config uart_config[] = {
- 		.name		= "ST16654",
- 		.fifo_size	= 64,
- 		.tx_loadsz	= 32,
--		.fcr		= UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_01 |
--				  UART_FCR_T_TRIG_10,
-+		.fcr		= UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_00,
- 		.rxtrig_bytes	= {8, 16, 56, 60},
- 		.flags		= UART_CAP_FIFO | UART_CAP_EFR | UART_CAP_SLEEP,
- 	},

systems/lctr-a72xx/cfg/firmware/config.txt

@@ -1,51 +0,0 @@
-# For more options and information see 
-# http://www.raspberrypi.org/documentation/configuration/config-txt.md
-# Some settings may impact device functionality. See link above for details
-
-kernel=uboot.bin
-device_tree_address=0x02000000
-
-# enable i2c
-dtparam=i2c_arm=on
-dtparam=spi=on
-
-# uncomment if you get no picture on HDMI for a default "safe" mode
-#hdmi_safe=1
-
-# uncomment this if your display has a black border of unused pixels visible
-# and your display can output without overscan
-#disable_overscan=1
-
-# uncomment the following to adjust overscan. Use positive numbers if console
-# goes off screen, and negative if there is too much border
-#overscan_left=16
-#overscan_right=16
-#overscan_top=16
-#overscan_bottom=16
-
-# uncomment to force a console size. By default it will be display's size minus
-# overscan.
-#framebuffer_width=1280
-#framebuffer_height=720
-
-# uncomment if hdmi display is not detected and composite is being output
-#hdmi_force_hotplug=1
-
-# uncomment to force a specific HDMI mode (this will force VGA)
-#hdmi_group=1
-#hdmi_mode=1
-
-# uncomment to force a HDMI mode rather than DVI. This can make audio work in
-# DMT (computer monitor) modes
-#hdmi_drive=2
-
-# uncomment to increase signal to HDMI, if you have interference, blanking, or
-# no display
-#config_hdmi_boost=4
-
-# uncomment for composite PAL
-#sdtv_mode=2
-
-#uncomment to overclock the arm. 700 MHz is the default.
-#arm_freq=800
-

systems/lctr-a72xx/config

@@ -1,19 +0,0 @@
-cfg_architecture='cortex-a72'
-cfg_storage='data0:ext4:/opt'
-cfg_services0='dropbear network storage upgrade syslog ptpd'
-cfg_services1=''
-cfg_services2='dune'
-cfg_modules=''
-cfg_packages='dropbear rsync busybox e2fsprogs dosfstools ptpd rpcbind rpi-boot-firmware bison binutils openssl linux/rpi exiftool libusb'
-cfg_target_linux_kernel='arch/arm/boot/zImage'
-cfg_ptpd_interface='eth0'
-cfg_eth_ext_mk='255.255.0.0'
-cfg_eth_ext_gw='10.0.0.1'
-cfg_terminal='tty1'
-cfg_partitions=\
-(
-    rpi-boot BOOT0  512B    32MiB
-    root     root0  32MiB   544MiB
-    data     data0  544MiB  -1
-)
-

systems/lctr-a72xx/lctr-a72xx-testbed.cfg

@@ -1,3 +0,0 @@
-cfg_hostname="lctr-a72xx-testbed"
-cfg_eth_ext_ip="10.0.200.18"
-cfg_kernel_boot_dev='/dev/mmcblk0p1'

systems/lctr-a8xx/lauv-xtreme-2-doam.cfg

@@ -0,0 +1,3 @@
+cfg_hostname='lauv-xtreme-2-doam'
+cfg_eth_ext_ip='10.0.10.53'
+cfg_kernel_boot_dev='/dev/sda1'

systems/lctr-a8xx/lauv-xtreme-2-trex.cfg

@@ -0,0 +1,5 @@
+cfg_packages='dropbear rsync busybox e2fsprogs libjpeg-turbo ptpd linux syslinux syslinux/host bzip2 libantlr3c boost europa'
+cfg_hostname='lauv-xtreme-2-doam'
+cfg_eth_ext_ip='10.0.10.52'
+cfg_kernel_boot_dev='/dev/sda1'
+cfg_services2='dune trex'

systems/lctr-a9xx/config

@@ -4,7 +4,7 @@ cfg_modules=''
 cfg_services0='dropbear network storage upgrade syslog'
 cfg_services1='huawei ntpd'
 cfg_services2='dune'
-cfg_packages='u-boot dropbear rsync busybox linux/v3_14 uswitch ppp iptables socat bridge-utils ntp e2fsprogs i2c-tools iperf dnsmasq'
+cfg_packages='u-boot dropbear rsync busybox linux uswitch ppp iptables socat bridge-utils ntp e2fsprogs i2c-tools iperf dnsmasq'
 cfg_target_linux_kernel='arch/arm/boot/zImage'
 cfg_target_linux_dtb='arch/arm/boot/dts/omap3-lctr-a9xx.dtb'
 cfg_target_uboot_config='igep0020'

systems/lctr-a9xx/manta-rugged-2.cfg

@@ -1,2 +0,0 @@
-cfg_hostname='manta-rugged-2'
-cfg_eth_ext_ip='10.0.30.25'

systems/lctr-a9xx/manta-sabuvis.cfg

@@ -1,2 +0,0 @@
-cfg_hostname='manta-sabuvis'
-cfg_eth_ext_ip='10.0.30.26'

systems/lctr-a9xx/patches/linux/4.4.66/00-lctr-a9xx-dts.patch

@@ -1,105 +0,0 @@
-diff --git linux-4.4.66/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
-index 30bbc37..7241be6 100644
---- linux-4.4.66/arch/arm/boot/dts/Makefile
-+++ linux-4.4.66/arch/arm/boot/dts/Makefile
-@@ -421,6 +421,7 @@
-	omap3-igep0020-rev-f.dtb \
-	omap3-igep0030.dtb \
-	omap3-igep0030-rev-g.dtb \
-+	omap3-lctr-a9xx.dtb \
-	omap3-ldp.dtb \
-	omap3-lilly-dbb056.dtb \
-	omap3-n900.dtb \
-diff -Nru linux-4.4.66/arch/arm/boot/dts/omap3-lctr-a9xx.dts linux-4.4.66.rasm/arch/arm/boot/dts/omap3-lctr-a9xx.dts
---- linux-4.4.66/arch/arm/boot/dts/omap3-lctr-a9xx.dts
-+++ linux-4.4.66.rasm/arch/arm/boot/dts/omap3-lctr-a9xx.dts
-@@ -0,0 +1,89 @@
-+/*
-+ * Copyright (C) 2014 Universidade do Porto - Faculdade de Engenharia
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.
-+ */
-+
-+#include <dt-bindings/input/input.h>
-+#include "omap3-igep0020.dts"
-+
-+/ {
-+	leds {
-+		boot {
-+			linux,default-trigger = "heartbeat";
-+		};
-+	};
-+
-+	gpio_keys {
-+		pinctrl-names = "default";
-+		pinctrl-0 = <&gpio_keys_pins>;
-+		compatible = "gpio-keys";
-+
-+		button@0 {
-+			label = "Button 0";
-+			gpios = <&gpio5 11 GPIO_ACTIVE_HIGH>;	/* gpio_139 */
-+			linux,code = <BTN_0>;
-+			debounce-interval = <5>;
-+		};
-+
-+		button@1 {
-+			label = "Button 1";
-+			gpios = <&gpio5 10 GPIO_ACTIVE_HIGH>;	/* gpio_138 */
-+			linux,code = <BTN_1>;
-+			debounce-interval = <5>;
-+		};
-+
-+		button@2 {
-+			label = "Button 2";
-+			gpios = <&gpio5 9 GPIO_ACTIVE_HIGH>;	/* gpio_137 */
-+			linux,code = <BTN_2>;
-+			debounce-interval = <5>;
-+		};
-+	};
-+
-+	pps {
-+		compatible = "pps-gpio";
-+		pinctrl-names = "default";
-+		pinctrl-0 = <&pps_pins>;
-+		gpios = <&gpio5 8 GPIO_ACTIVE_HIGH>;
-+		assert-rising-edge;
-+	};
-+};
-+
-+&omap3_pmx_core {
-+	gpio_keys_pins: pinmux_gpio_keys_pins {
-+		pinctrl-single,pins = <
-+			0x136 (PIN_INPUT_PULLDOWN | MUX_MODE4)	/* gpio_137 - button 2 */
-+			0x138 (PIN_INPUT_PULLDOWN | MUX_MODE4)	/* gpio_138 - button 1 */
-+			0x13a (PIN_INPUT_PULLDOWN | MUX_MODE4)	/* gpio_139 - button 0 */
-+		>;
-+	};
-+
-+	pps_pins: pinmux_pps_pins {
-+		pinctrl-single,pins = <
-+			0x134 (PIN_INPUT_PULLDOWN | MUX_MODE4)	/* gpio_136 */
-+		>;
-+	};
-+};
-+
-+&i2c2 {
-+	rtc@68 {
-+		compatible = "dallas,ds1307";
-+		reg = <0x68>;
-+	};
-+};
-+
-+/* Disable WiFi/Bluetooth combo. */
-+&mmc2 {
-+	status = "disabled";
-+};
-+
-+&vdd33 {
-+	status = "disabled";
-+};
-+
-+&lbee1usjyc_pdn {
-+	status = "disabled";
-+};