Added necsave packages to lauv-xplore-2.

Conflicts:
	systems/lctr-b2xx/lauv-noptilus-3-aux.cfg

.gitignore

@@ -9,6 +9,3 @@
 /lauv-aux
 /lauv-aux-rpi
 /ntnu-b2xx
-/stamp9g20
-/lctr-rpi
-build.bash

architectures/arm-1176.cfg

@@ -2,5 +2,5 @@ cfg_target_canonical="armv11-$cfg_glued_vendor-linux-gnueabi"
 cfg_target_linux='arm'
 cfg_target_uboot_arch='arm'
 cfg_target_gcc_flags='-O2 -pipe -funit-at-a-time -mcpu=arm1176jzf-s -mtune=arm1176jzf-s -mfloat-abi=softfp -mfpu=vfpv3'
-cfg_target_gcc_configure_flags='--with-arch=armv7-a --with-mcpu=arm1176jzf-s --with-mtune=arm1176jzf-s --with-fpu=vfpv3 --with-float=softfp'
+cfg_target_gcc_configure_flags='--with-arch=armv7-a --with-cpu=arm1176jzf-s --with-tune=arm1176jzf-s --with-fpu=vfpv3 --with-float=softfp'
 cfg_target_ar_flags='elf32-littlearm'

architectures/arm926ej-s.cfg

@@ -1,4 +0,0 @@
-cfg_target_canonical="armv5te-$cfg_glued_vendor-linux-gnueabi"
-cfg_target_linux='arm'
-cfg_target_gcc_flags='-O2 -pipe -funit-at-a-time -mtune=arm926ej-s -mfloat-abi=soft'
-cfg_target_gcc_configure_flags='--with-arch=armv5te --with-mtune=arm926ej-s --with-float=soft'

architectures/atom.cfg

@@ -1,4 +1,4 @@
 cfg_target_canonical="atom-$cfg_glued_vendor-linux-gnu"
 cfg_target_linux='x86'
 cfg_target_linux_kernel='arch/x86/boot/bzImage'
-cfg_target_gcc_configure_flags='--with-arch=atom --with-mcpu=atom --with-mtune=atom'
+cfg_target_gcc_configure_flags='--with-arch=atom --with-cpu=atom --with-tune=atom'

architectures/atom64.cfg

@@ -1,6 +1,6 @@
 cfg_target_canonical="atom64-$cfg_glued_vendor-linux-gnu"
 cfg_target_linux='x86'
 cfg_target_gcc_flags='-O2 -pipe -march=atom -funit-at-a-time'
-cfg_target_gcc_configure_flags='--with-mcpu=x86-64 --with-mtune=atom'
+cfg_target_gcc_configure_flags='--with-cpu=x86-64 --with-tune=atom'
 cfg_target_linux_kernel='arch/x86/boot/bzImage'
 cfg_target_lib64='yes'

architectures/cortex-a8-hardfp-vfpv4.cfg

@@ -1,6 +0,0 @@
-cfg_target_canonical="armv7-$cfg_glued_vendor-linux-gnueabihf"
-cfg_target_linux='arm'
-cfg_target_uboot_arch='arm'
-cfg_target_gcc_flags='-O2 -pipe -funit-at-a-time -mcpu=cortex-a8 -mtune=cortex-a8 -mfloat-abi=hard -mfpu=vfpv4'
-cfg_target_gcc_configure_flags='--with-arch=armv7-a --with-mcpu=cortex-a8 --with-mtune=cortex-a8 --with-fpu=vfpv4 --with-float=hard'
-cfg_target_ar_flags='elf32-littlearm'

architectures/cortex-a8-hardfp.cfg

@@ -2,5 +2,5 @@ cfg_target_canonical="armv7-$cfg_glued_vendor-linux-gnueabihf"
 cfg_target_linux='arm'
 cfg_target_uboot_arch='arm'
 cfg_target_gcc_flags='-O2 -pipe -funit-at-a-time -mcpu=cortex-a8 -mtune=cortex-a8 -mfloat-abi=hard -mfpu=vfpv3'
-cfg_target_gcc_configure_flags='--with-arch=armv7-a --with-mcpu=cortex-a8 --with-mtune=cortex-a8 --with-fpu=vfpv3 --with-float=hard'
+cfg_target_gcc_configure_flags='--with-arch=armv7-a --with-cpu=cortex-a8 --with-tune=cortex-a8 --with-fpu=vfpv3 --with-float=hard'
 cfg_target_ar_flags='elf32-littlearm'

architectures/cortex-a8.cfg

@@ -2,5 +2,5 @@ cfg_target_canonical="armv7-$cfg_glued_vendor-linux-gnueabi"
 cfg_target_linux='arm'
 cfg_target_uboot_arch='arm'
 cfg_target_gcc_flags='-O2 -pipe -funit-at-a-time -mcpu=cortex-a8 -mtune=cortex-a8 -mfloat-abi=softfp -mfpu=vfpv3'
-cfg_target_gcc_configure_flags='--with-arch=armv7-a --with-mcpu=cortex-a8 --with-mtune=cortex-a8 --with-fpu=vfpv3 --with-float=softfp'
+cfg_target_gcc_configure_flags='--with-arch=armv7-a --with-cpu=cortex-a8 --with-tune=cortex-a8 --with-fpu=vfpv3 --with-float=softfp'
 cfg_target_ar_flags='elf32-littlearm'

architectures/cortex-a9-hardfp.cfg

@@ -2,5 +2,5 @@ cfg_target_canonical="armv7-$cfg_glued_vendor-linux-gnueabihf"
 cfg_target_linux='arm'
 cfg_target_uboot_arch='arm'
 cfg_target_gcc_flags='-O2 -pipe -funit-at-a-time -mcpu=cortex-a9 -mtune=cortex-a9 -mfloat-abi=hard -mfpu=vfpv3'
-cfg_target_gcc_configure_flags='--with-arch=armv7-a --with-mcpu=cortex-a9 --with-mtune=cortex-a9 --with-fpu=vfpv3 --with-float=hard'
+cfg_target_gcc_configure_flags='--with-arch=armv7-a --with-cpu=cortex-a9 --with-tune=cortex-a9 --with-fpu=vfpv3 --with-float=hard'
 cfg_target_ar_flags='elf32-littlearm'

architectures/geode.cfg

@@ -1,3 +1,3 @@
 cfg_target_canonical="geode-$cfg_glued_vendor-linux-gnu"
 cfg_target_linux='x86'
-cfg_target_gcc_configure_flags='--with-arch=geode --with-mcpu=geode --with-mtune=geode'
+cfg_target_gcc_configure_flags='--with-arch=geode --with-cpu=geode --with-tune=geode'

architectures/i586.cfg

@@ -1,5 +1,5 @@
 cfg_target_canonical="i586-$cfg_glued_vendor-linux-gnu"
 cfg_target_linux='x86'
-cfg_target_gcc_configure_flags='--with-arch=i586 --with-mcpu=i586 --with-mtune=i586'
+cfg_target_gcc_configure_flags='--with-arch=i586 --with-cpu=i586 --with-tune=i586'
 cfg_target_gcc_flags='-O2 -pipe -march=i586 -funit-at-a-time'
 cfg_target_glibc_configure_flags='--with-cpu=i586'

architectures/i686.cfg

@@ -1,6 +1,6 @@
 cfg_target_canonical="i686-$cfg_glued_vendor-linux-gnu"
 cfg_target_linux='x86'
 cfg_target_gcc_flags='-O2 -pipe -march=i686 -funit-at-a-time'
-cfg_target_gcc_configure_flags='--mwith-cpu=i686'
-cfg_target_glibc_configure_flags='--with-mcpu=i686'
+cfg_target_gcc_configure_flags='--with-cpu=i686'
+cfg_target_glibc_configure_flags='--with-cpu=i686'
 cfg_target_linux_kernel='arch/x86/boot/bzImage'

architectures/mips32r2.cfg

@@ -1,5 +1,5 @@
 cfg_target_canonical="mipsisa32r2-$cfg_glued_vendor-linux-gnu"
 cfg_target_linux='mips'
 cfg_target_gcc_flags='-O2 -pipe -funit-at-a-time -mabi=32 -mips32r2 -mtune=mips32r2 -msoft-float'
-cfg_target_gcc_configure_flags='--with-abi=32 --with-mtune=mips32r2 --with-float=soft'
+cfg_target_gcc_configure_flags='--with-abi=32 --with-tune=mips32r2 --with-float=soft'
 cfg_target_glibc_configure_flags='--without-fp'

architectures/xscale-iwmmxt.cfg

@@ -1,4 +1,4 @@
 cfg_target_canonical="armv5-$cfg_glued_vendor-linux-gnueabi"
 cfg_target_linux='arm'
 cfg_target_gcc_flags='-O2 -pipe -funit-at-a-time -mcpu=iwmmxt -mtune=iwmmxt -mfloat-abi=soft'
-cfg_target_gcc_configure_flags='--with-arch=iwmmxt --with-mcpu=iwmmxt --with-mtune=iwmmxt --with-float=soft'
+cfg_target_gcc_configure_flags='--with-arch=iwmmxt --with-cpu=iwmmxt --with-tune=iwmmxt --with-float=soft'

architectures/xscale.cfg

@@ -1,4 +1,4 @@
 cfg_target_canonical="armv5-$cfg_glued_vendor-linux-gnueabi"
 cfg_target_linux='arm'
 cfg_target_gcc_flags='-O2 -pipe -funit-at-a-time -mtune=xscale -mfloat-abi=soft'
-cfg_target_gcc_configure_flags='--with-arch=armv5te --with-mtune=xscale --with-float=soft'
+cfg_target_gcc_configure_flags='--with-arch=armv5te --with-tune=xscale --with-float=soft'

docker/Dockerfile

@@ -1,54 +0,0 @@
-###########################################################################
-# GLUED: GNU/Linux Uniform Environment Distribution                       #
-# Copyright (C) 2016 OceanScan - Marine Systems & Technology, Lda.        #
-###########################################################################
-# This program is free software; you can redistribute it and/or modify    #
-# it under the terms of the GNU General Public License as published by    #
-# the Free Software Foundation; either version 2 of the License, or (at   #
-# your option) any later version.                                         #
-#                                                                         #
-# This program is distributed in the hope that it will be useful, but     #
-# WITHOUT ANY WARRANTY; without even the implied warranty of              #
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU       #
-# General Public License for more details.                                #
-#                                                                         #
-# You should have received a copy of the GNU General Public License       #
-# along with this program; if not, write to the Free Software             #
-# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA           #
-# 02110-1301 USA.                                                         #
-###########################################################################
-# Author: Ricardo Martins                                                 #
-###########################################################################
-
-FROM debian:8
-
-MAINTAINER Ricardo Martins <rasm@oceanscan-mst.com>
-
-ENV DEBIAN_FRONTEND noninteractive
-
-# Update distro.
-RUN echo "deb http://ftp.us.debian.org/debian testing non-free contrib" >> /etc/apt/sources.list
-RUN echo "deb http://mirrors.fe.up.pt/ubuntu xenial main restricted universe multiverse" >> /etc/apt/sources.list
-RUN echo "deb http://mirrors.fe.up.pt/ubuntu xenial-updates main restricted universe multiverse" >> /etc/apt/sources.list
-RUN echo "deb http://mirrors.fe.up.pt/ubuntu xenial-backports main restricted universe multiverse" >> /etc/apt/sources.list
-RUN apt-key adv --recv-keys --keyserver keyserver.ubuntu.com 3B4FE6ACC0B21F32
-RUN apt-get update -y
-RUN apt-get install -y apt-utils
-RUN apt-get dist-upgrade -y
-RUN apt-get install -y g++-5
-RUN apt-get install -y gcc-5
-RUN apt-get install -y wget
-RUN apt-get install -y bzip2
-RUN apt-get install -y git
-RUN apt-get install -y g++-multilib
-RUN apt-get install -y file
-RUN apt-get install -y kmod
-RUN apt-get install -y vim
-RUN apt-get install -y nasm
-RUN apt-get install -y build-essential
-RUN apt-get install -y make
-RUN apt-get install -y bison
-RUN apt-get install -y flex
-RUN apt-get install -y libssl-dev
-RUN apt-get install -y libncurses-dev
-RUN update-alternatives --install /usr/bin/gcc gcc /usr/bin/gcc-5 60 --slave /usr/bin/g++ g++ /usr/bin/g++-5

docker/Makefile

@@ -1,44 +0,0 @@
-###########################################################################
-# GLUED: GNU/Linux Uniform Environment Distribution                       #
-# Copyright (C) 2016 OceanScan - Marine Systems & Technology, Lda.        #
-###########################################################################
-# This program is free software; you can redistribute it and/or modify    #
-# it under the terms of the GNU General Public License as published by    #
-# the Free Software Foundation; either version 2 of the License, or (at   #
-# your option) any later version.                                         #
-#                                                                         #
-# This program is distributed in the hope that it will be useful, but     #
-# WITHOUT ANY WARRANTY; without even the implied warranty of              #
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU       #
-# General Public License for more details.                                #
-#                                                                         #
-# You should have received a copy of the GNU General Public License       #
-# along with this program; if not, write to the Free Software             #
-# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA           #
-# 02110-1301 USA.                                                         #
-###########################################################################
-# Author: Ricardo Martins                                                 #
-###########################################################################
-
-TAG     := glued
-VERSION := 2016.05.0
-VOLUME  := $(CURDIR)/..
-DNS	:= 8.8.8.8
-
-all:
-	docker build -t $(TAG):$(VERSION) .
-
-shell:
-	docker run -w $(VOLUME) --dns=$(DNS) -i -a stdin -a stdout -v $(VOLUME):$(VOLUME) -t $(TAG):$(VERSION)
-
-clean:
-	@echo "* Stopping docker service..."
-	@sudo systemctl stop docker
-	@echo "* Cleaning docker service..."
-	@sudo rm -rf /var/lib/docker
-	@echo "* Starting docker service..."
-	@sudo systemctl start docker
-	@echo "* Done."
-
-delete_img:
-	@sudo docker system prune -a

functions.bash

@@ -1,6 +1,6 @@
 ###########################################################################
 # GLUED: GNU/Linux Uniform Environment Distribution                       #
-# Copyright (C) 2007-2019 Universidade do Porto - Faculdade de Engenharia #
+# Copyright (C) 2007-2014 Universidade do Porto - Faculdade de Engenharia #
 # Laboratório de Sistemas e Tecnologia Subaquática (LSTS)                 #
 ###########################################################################
 # This program is free software; you can redistribute it and/or modify    #
@@ -40,15 +40,3 @@ err()
 {
     echo -e "[$(date +"%Y-%m-%d %H:%M:%S")] \033[0m\033[1;31mERROR: $*\033[0m"
 }
-
-ucat()
-{
-    case "$1" in
-        *.gz)
-            zcat "$1"
-            ;;
-        *)
-            cat "$1"
-            ;;
-    esac
-}

mkconfig.bash

@@ -1,7 +1,7 @@
 #! /bin/bash
 ###########################################################################
 # GLUED: GNU/Linux Uniform Environment Distribution                       #
-# Copyright (C) 2007-2019 Universidade do Porto - Faculdade de Engenharia #
+# Copyright (C) 2007-2014 Universidade do Porto - Faculdade de Engenharia #
 # Laboratório de Sistemas e Tecnologia Subaquática (LSTS)                 #
 ###########################################################################
 # This program is free software; you can redistribute it and/or modify    #
@@ -23,7 +23,7 @@
 ###########################################################################
 
 # Config: GLUED version.
-cfg_glued_version='2019.08'
+cfg_glued_version='2016.03'
 # Config: GLUED vendor.
 cfg_glued_vendor='lsts'
 

mkdisk.bash

@@ -1,7 +1,7 @@
 #! /bin/bash
 ###########################################################################
 # GLUED: GNU/Linux Uniform Environment Distribution                       #
-# Copyright (C) 2007-2019 Universidade do Porto - Faculdade de Engenharia #
+# Copyright (C) 2007-2014 Universidade do Porto - Faculdade de Engenharia #
 # Laboratório de Sistemas e Tecnologia Subaquática (LSTS)                 #
 ###########################################################################
 # This program is free software; you can redistribute it and/or modify    #
@@ -70,7 +70,7 @@ create_part_xboot()
     nfo2 "Populating filesystem"
     cmd_mount vfat "$part_dev" || die
 
-    for f in MLO u-boot.img uEnv.txt kernel; do
+    for f in MLO u-boot.img uEnv.txt; do
         if [ -f "$cfg_sys_family/rootfs/boot/$f" ]; then
             nfo2 installing $f to boot partition
             cp "$cfg_sys_family/rootfs/boot/$f" mount || die
@@ -103,17 +103,15 @@ create_part_rpiboot()
 
     for f in "$cfg_sys_family/rootfs/boot/"*; do
         nfo2 installing $f to boot partition
-        cp -r "$f" mount || die
+        cp "$f" mount || die
     done
 
     nfo2 renaming kernel to kernel7.img
     mv mount/kernel mount/kernel7.img
 
-    if [ -f mount/board.dtb ]; then
-        dtb=$(basename "$cfg_target_linux_dtb")
-        nfo2 renaming board.dtb to "$dtb"
-        mv "mount/board.dtb" "mount/$dtb"
-    fi
+    dtb=$(basename "$cfg_target_linux_dtb")
+    nfo2 renaming board.dtb to "$dtb"
+    mv "mount/board.dtb" "mount/$dtb"
 
     cmd_parted "$dev_loop" \
         set "$part_nr" lba on \

mkpackage.bash

@@ -1,7 +1,7 @@
 #! /bin/bash
 ###########################################################################
 # GLUED: GNU/Linux Uniform Environment Distribution                       #
-# Copyright (C) 2007-2019 Universidade do Porto - Faculdade de Engenharia #
+# Copyright (C) 2007-2014 Universidade do Porto - Faculdade de Engenharia #
 # Laboratório de Sistemas e Tecnologia Subaquática (LSTS)                 #
 ###########################################################################
 # This program is free software; you can redistribute it and/or modify    #
@@ -71,22 +71,17 @@ download()
             fi
         fi
 
-	# First try LSTS mirror.
-	lsts_url="https://www.lsts.pt/glued/$(basename $u)"
-        download_tool "$lsts_url" "$cfg_dir_downloads/$file"
+        # First try OceanScan-MST mirror.
+        omst_url="http://www.omst.pt/glued/$(basename $u)"
+        download_tool "$omst_url" "$cfg_dir_downloads/$file"
         if [ $? -ne 0 ]; then
-	    # Then try OceanScan-MST mirror.
-            omst_url="http://www.omst.pt/glued/$(basename $u)"
-            download_tool "$omst_url" "$cfg_dir_downloads/$file"
+            # On failure try upstream URL.
+            download_tool "$u" "$cfg_dir_downloads/$file"
             if [ $? -ne 0 ]; then
-		# On failure try upstream URL.
-		download_tool "$u" "$cfg_dir_downloads/$file"
-		if [ $? -ne 0 ]; then
-                    echo "ERROR: download failed"
-                    exit 1
-		fi
+                echo "ERROR: download failed"
+                exit 1
             fi
-	fi
+        fi
 
         md5="$(md5sum_tool "$cfg_dir_downloads/$file")"
         if [ "$s" != "$md5" ]; then

mksystem.bash

@@ -1,7 +1,7 @@
 #! /bin/bash
 ###########################################################################
 # GLUED: GNU/Linux Uniform Environment Distribution                       #
-# Copyright (C) 2007-2019 Universidade do Porto - Faculdade de Engenharia #
+# Copyright (C) 2007-2013 Universidade do Porto - Faculdade de Engenharia #
 # Laboratório de Sistemas e Tecnologia Subaquática (LSTS)                 #
 ###########################################################################
 # This program is free software; you can redistribute it and/or modify    #

mkupdate.bash

@@ -1,68 +0,0 @@
-#! /bin/bash
-###########################################################################
-# GLUED: GNU/Linux Uniform Environment Distribution                       #
-# Copyright (C) 2007-2019 Universidade do Porto - Faculdade de Engenharia #
-# Laboratório de Sistemas e Tecnologia Subaquática (LSTS)                 #
-###########################################################################
-# This program is free software; you can redistribute it and/or modify    #
-# it under the terms of the GNU General Public License as published by    #
-# the Free Software Foundation; either version 2 of the License, or (at   #
-# your option) any later version.                                         #
-#                                                                         #
-# This program is distributed in the hope that it will be useful, but     #
-# WITHOUT ANY WARRANTY; without even the implied warranty of              #
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU       #
-# General Public License for more details.                                #
-#                                                                         #
-# You should have received a copy of the GNU General Public License       #
-# along with this program; if not, write to the Free Software             #
-# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA           #
-# 02110-1301 USA.                                                         #
-###########################################################################
-# Author: Tiago Marques                                                   #
-###########################################################################
-
-update_tool()
-{
-    rsync -v "$1" root@"$2":/opt/"$cfg_glued_vendor"/glued/
-    if [ $? -eq 0 ]; then
-        return 0
-    fi
-
-    scp "$1" root@"$2":/opt/"$cfg_glued_vendor"/glued/
-    if [ $? -eq 0 ]; then
-        return 0
-    fi
-
-    return 1
-}
-
-# Check command line arguments.
-if [ $# -lt 1 ]; then
-    echo "Usage: $0 <config>"
-    exit 1
-fi
-
-# Read system configuration file.
-if ! [ -f "$1" ]; then
-    echo -e "\e[1;31mERROR: invalid configuration file '$1'\e[0m"
-    exit 1
-fi
-
-# Read system configuration file.
-source "$1"
-
-if [ ! -f "$cfg_rootfs_tar" ];
-then
-    echo -e "\e[1;31mERROR: You should run ./pkrootfs $1\e[0m"
-    exit 1
-fi
-
-# check for dirty repo
-if [[ "$cfg_glued_git_version" =~ .*-dirty$ ]]
-then
-    echo -e "\e[1;31mThis glued's version is dirty\e[0m"
-fi
-
-# send package to the system
-update_tool "$cfg_rootfs_tar" "$cfg_eth_ext_ip"

pkrootfs.bash

@@ -1,7 +1,7 @@
 #! /bin/bash
 ###########################################################################
 # GLUED: GNU/Linux Uniform Environment Distribution                       #
-# Copyright (C) 2007-2019 Universidade do Porto - Faculdade de Engenharia #
+# Copyright (C) 2007-2014 Universidade do Porto - Faculdade de Engenharia #
 # Laboratório de Sistemas e Tecnologia Subaquática (LSTS)                 #
 ###########################################################################
 # This program is free software; you can redistribute it and/or modify    #
@@ -60,7 +60,7 @@ done
 
 # Copy DTB.
 if [ -n "$cfg_target_linux_dtb" ]; then
-    cp -v "$cfg_dir_rootfs/boot/$(basename $cfg_target_linux_dtb)" "$cfg_dir_rootfs/boot/board.dtb"
+    cp -v "$cfg_dir_toolchain/boot/$(basename $cfg_target_linux_dtb)" "$cfg_dir_rootfs/boot/board.dtb"
 fi
 
 # Write config vars.

pktoolchain.bash

@@ -1,7 +1,7 @@
 #! /bin/bash
 ###########################################################################
 # GLUED: GNU/Linux Uniform Environment Distribution                       #
-# Copyright (C) 2007-2019 Universidade do Porto - Faculdade de Engenharia #
+# Copyright (C) 2007-2014 Universidade do Porto - Faculdade de Engenharia #
 # Laboratório de Sistemas e Tecnologia Subaquática (LSTS)                 #
 ###########################################################################
 # This program is free software; you can redistribute it and/or modify    #

rules/bash/default.bash

@@ -1,45 +0,0 @@
-version=\
-(
-    "4.4.18"
-)
-
-url=\
-(
-    "http://ftp.gnu.org/gnu/bash/bash-$version.tar.gz"
-)
-
-md5=\
-(
-    '518e2c187cc11a17040f0915dddce54e'
-)
-
-maintainer=\
-(
-    'Pedro Gonçalves <pedro@fe.up.pt>'
-)
-
-
-configure()
-{
-    ./configure \
-    --prefix=${cfg_dir_rootfs}/usr \
-    --host=${cfg_target_canonical} \
-    --bindir=${cfg_dir_toolchain}/bin \
-    --without-bash-malloc
-}
-
-build()
-{
-    $cmd_make VERBOSE=1
-}
-
-host_install()
-{
-    $cmd_make install
-}
-
-target_install()
-{
-    $cmd_cp bash ${cfg_dir_rootfs}/usr/bin
-    $cmd_cp bashversion ${cfg_dir_rootfs}/usr/bin
-}

rules/binutils/cross.bash

@@ -1,6 +1,6 @@
 version=\
 (
-    '2.28'
+    '2.25.1'
 )
 
 url=\
@@ -10,7 +10,7 @@ url=\
 
 md5=\
 (
-    '9e8340c96626b469a603c15c9d843727'
+    'ac493a78de4fee895961d025b7905be4'
 )
 
 maintainer=\

rules/boost/default.bash

@@ -37,8 +37,7 @@ configure()
 {
     cd "../boost_$vendor_version" &&
     ./bootstrap.sh \
-        --with-icu="$cfg_dir_toolchain_sysroot/usr" \
-        --with-libraries="regex,filesystem,system,thread"
+        --with-icu="$cfg_dir_toolchain_sysroot/usr"
 
     GXX_VER=$(${cmd_target_cxx} -dumpversion)
     echo "using gcc : ${GXX_VER}  : ${cmd_target_cxx} : <cxxflags>\"-pipe -Os  -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 ${cfg_target_gcc_flags} \" <linkflags>\"\" ;" > user-config.jam

rules/boost/patches-1.55.0/00-boost_10125.patch

@@ -1,51 +0,0 @@
---- a/boost/thread/pthread/once.hpp
-+++ b/boost/thread/pthread/once.hpp
-@@ -42,7 +42,7 @@ namespace boost
-   }
- 
- #ifdef BOOST_THREAD_PROVIDES_ONCE_CXX11
--#ifndef BOOST_NO_CXX11_VARIADIC_TEMPLATES
-+#if !defined(BOOST_NO_CXX11_VARIADIC_TEMPLATES) && !defined(BOOST_NO_CXX11_RVALUE_REFERENCES)
-     template<typename Function, class ...ArgTypes>
-     inline void call_once(once_flag& flag, BOOST_THREAD_RV_REF(Function) f, BOOST_THREAD_RV_REF(ArgTypes)... args);
- #else
-@@ -65,7 +65,7 @@ namespace boost
-   private:
-       volatile thread_detail::uintmax_atomic_t epoch;
- 
--#ifndef BOOST_NO_CXX11_VARIADIC_TEMPLATES
-+#if !defined(BOOST_NO_CXX11_VARIADIC_TEMPLATES) && !defined(BOOST_NO_CXX11_RVALUE_REFERENCES)
-       template<typename Function, class ...ArgTypes>
-       friend void call_once(once_flag& flag, BOOST_THREAD_RV_REF(Function) f, BOOST_THREAD_RV_REF(ArgTypes)... args);
- #else
-@@ -118,7 +118,7 @@ namespace boost
-     // http://www.open-std.org/jtc1/sc22/wg21/docs/papers/2007/n2444.html
- 
- 
--#ifndef BOOST_NO_CXX11_VARIADIC_TEMPLATES
-+#if !defined(BOOST_NO_CXX11_VARIADIC_TEMPLATES) && !defined(BOOST_NO_CXX11_RVALUE_REFERENCES)
- 
- 
-   template<typename Function, class ...ArgTypes>
---- a/boost/thread/pthread/once_atomic.hpp
-+++ b/boost/thread/pthread/once_atomic.hpp
-@@ -115,7 +115,7 @@ namespace boost
- #endif
- 
- 
--#ifndef BOOST_NO_CXX11_VARIADIC_TEMPLATES
-+#if !defined(BOOST_NO_CXX11_VARIADIC_TEMPLATES) && !defined(BOOST_NO_CXX11_RVALUE_REFERENCES)
- 
-   template<typename Function, class ...ArgTypes>
-   inline void call_once(once_flag& flag, BOOST_THREAD_RV_REF(Function) f, BOOST_THREAD_RV_REF(ArgTypes)... args)
---- a/boost/thread/win32/once.hpp
-+++ b/boost/thread/win32/once.hpp
-@@ -227,7 +227,7 @@ namespace boost
-         }
-     }
- 
--#ifndef BOOST_NO_CXX11_VARIADIC_TEMPLATES
-+#if !defined BOOST_NO_CXX11_VARIADIC_TEMPLATES && !defined(BOOST_NO_CXX11_RVALUE_REFERENCES)
- //#if defined(BOOST_THREAD_RVALUE_REFERENCES_DONT_MATCH_FUNTION_PTR)
-     inline void call_once(once_flag& flag, void (*f)())
-     {

rules/bridge-utils/default.bash

@@ -1,16 +1,16 @@
 version=\
 (
-    '1.6'
+    '1.5'
 )
 
 url=\
 (
-    "http://www.kernel.org/pub/linux/utils/net/bridge-utils/bridge-utils-$version.tar.gz"
+    "http://downloads.sourceforge.net/project/bridge/bridge/bridge-utils-$version.tar.gz"
 )
 
 md5=\
 (
-    'f369e90e85e4bb46baa26a7b9d66b578'
+    'ec7b381160b340648dede58c31bb2238'
 )
 
 maintainer=\

rules/busybox/config

@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Busybox version: 1.24.1
-# Tue Apr  5 18:00:54 2016
+# Busybox version: 1.22.1
+# Sun Feb  8 18:17:19 2015
 #
 CONFIG_HAVE_DOT_CONFIG=y
 
@@ -36,8 +36,6 @@ CONFIG_LAST_SUPPORTED_WCHAR=767
 # CONFIG_UNICODE_BIDI_SUPPORT is not set
 # CONFIG_UNICODE_NEUTRAL_TABLE is not set
 # CONFIG_UNICODE_PRESERVE_BROKEN is not set
-# CONFIG_PAM is not set
-CONFIG_FEATURE_USE_SENDFILE=y
 CONFIG_LONG_OPTS=y
 CONFIG_FEATURE_DEVPTS=y
 # CONFIG_FEATURE_CLEAN_UP is not set
@@ -75,7 +73,6 @@ CONFIG_EXTRA_LDLIBS=""
 #
 # CONFIG_DEBUG is not set
 # CONFIG_DEBUG_PESSIMIZE is not set
-# CONFIG_UNIT_TEST is not set
 # CONFIG_WERROR is not set
 CONFIG_NO_DEBUG_LIB=y
 # CONFIG_DMALLOC is not set
@@ -156,11 +153,10 @@ CONFIG_XZ=y
 # CONFIG_GZIP is not set
 # CONFIG_FEATURE_GZIP_LONG_OPTIONS is not set
 CONFIG_GZIP_FAST=0
-# CONFIG_FEATURE_GZIP_LEVELS is not set
 # CONFIG_LZOP is not set
 # CONFIG_LZOP_COMPR_HIGH is not set
-# CONFIG_RPM2CPIO is not set
 # CONFIG_RPM is not set
+# CONFIG_RPM2CPIO is not set
 CONFIG_TAR=y
 # CONFIG_FEATURE_TAR_CREATE is not set
 CONFIG_FEATURE_TAR_AUTODETECT=y
@@ -184,17 +180,9 @@ CONFIG_DATE=y
 CONFIG_FEATURE_DATE_ISOFMT=y
 # CONFIG_FEATURE_DATE_NANO is not set
 CONFIG_FEATURE_DATE_COMPAT=y
-CONFIG_DD=y
-CONFIG_FEATURE_DD_SIGNAL_HANDLING=y
-# CONFIG_FEATURE_DD_THIRD_STATUS_LINE is not set
-# CONFIG_FEATURE_DD_IBS_OBS is not set
-CONFIG_FEATURE_DD_STATUS=y
 # CONFIG_HOSTID is not set
 CONFIG_ID=y
 CONFIG_GROUPS=y
-CONFIG_SHUF=y
-CONFIG_SYNC=y
-CONFIG_FEATURE_SYNC_FANCY=y
 CONFIG_TEST=y
 # CONFIG_FEATURE_TEST_64 is not set
 CONFIG_TOUCH=y
@@ -203,8 +191,6 @@ CONFIG_FEATURE_TOUCH_SUSV3=y
 CONFIG_TR=y
 CONFIG_FEATURE_TR_CLASSES=y
 CONFIG_FEATURE_TR_EQUIV=y
-CONFIG_TRUNCATE=y
-CONFIG_UNLINK=y
 CONFIG_BASE64=y
 # CONFIG_WHO is not set
 # CONFIG_USERS is not set
@@ -220,6 +206,10 @@ CONFIG_CHROOT=y
 CONFIG_CP=y
 # CONFIG_FEATURE_CP_LONG_OPTIONS is not set
 CONFIG_CUT=y
+CONFIG_DD=y
+CONFIG_FEATURE_DD_SIGNAL_HANDLING=y
+# CONFIG_FEATURE_DD_THIRD_STATUS_LINE is not set
+# CONFIG_FEATURE_DD_IBS_OBS is not set
 CONFIG_DF=y
 # CONFIG_FEATURE_DF_FANCY is not set
 CONFIG_DIRNAME=y
@@ -288,6 +278,7 @@ CONFIG_STAT=y
 CONFIG_FEATURE_STAT_FORMAT=y
 CONFIG_STTY=y
 # CONFIG_SUM is not set
+CONFIG_SYNC=y
 # CONFIG_TAC is not set
 CONFIG_TAIL=y
 # CONFIG_FEATURE_FANCY_TAIL is not set
@@ -296,7 +287,6 @@ CONFIG_TEE=y
 CONFIG_TRUE=y
 CONFIG_TTY=y
 CONFIG_UNAME=y
-CONFIG_UNAME_OSNAME="GNU/Linux"
 # CONFIG_UNEXPAND is not set
 # CONFIG_FEATURE_UNEXPAND_LONG_OPTIONS is not set
 CONFIG_UNIQ=y
@@ -308,11 +298,6 @@ CONFIG_WC=y
 CONFIG_WHOAMI=y
 CONFIG_YES=y
 
-#
-# Common options
-#
-CONFIG_FEATURE_VERBOSE=y
-
 #
 # Common options for cp and mv
 #
@@ -399,9 +384,6 @@ CONFIG_FEATURE_VI_USE_SIGNALS=y
 # CONFIG_FEATURE_VI_SET is not set
 CONFIG_FEATURE_VI_WIN_RESIZE=y
 CONFIG_FEATURE_VI_ASK_TERMINAL=y
-CONFIG_FEATURE_VI_UNDO=y
-CONFIG_FEATURE_VI_UNDO_QUEUE=y
-CONFIG_FEATURE_VI_UNDO_QUEUE_MAX=256
 CONFIG_FEATURE_ALLOW_EXEC=y
 
 #
@@ -418,7 +400,6 @@ CONFIG_FEATURE_FIND_MAXDEPTH=y
 # CONFIG_FEATURE_FIND_NEWER is not set
 # CONFIG_FEATURE_FIND_INUM is not set
 CONFIG_FEATURE_FIND_EXEC=y
-CONFIG_FEATURE_FIND_EXEC_PLUS=y
 CONFIG_FEATURE_FIND_USER=y
 CONFIG_FEATURE_FIND_GROUP=y
 CONFIG_FEATURE_FIND_NOT=y
@@ -440,7 +421,6 @@ CONFIG_XARGS=y
 CONFIG_FEATURE_XARGS_SUPPORT_QUOTES=y
 # CONFIG_FEATURE_XARGS_SUPPORT_TERMOPT is not set
 CONFIG_FEATURE_XARGS_SUPPORT_ZERO_TERM=y
-CONFIG_FEATURE_XARGS_SUPPORT_REPL_STR=y
 
 #
 # Init Utilities
@@ -477,7 +457,6 @@ CONFIG_USE_BB_CRYPT=y
 CONFIG_ADDUSER=y
 # CONFIG_FEATURE_ADDUSER_LONG_OPTIONS is not set
 # CONFIG_FEATURE_CHECK_NAMES is not set
-CONFIG_LAST_ID=60000
 CONFIG_FIRST_SYSTEM_ID=100
 CONFIG_LAST_SYSTEM_ID=999
 CONFIG_ADDGROUP=y
@@ -489,6 +468,7 @@ CONFIG_DELGROUP=y
 CONFIG_GETTY=y
 CONFIG_LOGIN=y
 # CONFIG_LOGIN_SESSION_AS_CHILD is not set
+# CONFIG_PAM is not set
 # CONFIG_LOGIN_SCRIPTS is not set
 CONFIG_FEATURE_NOLOGIN=y
 # CONFIG_FEATURE_SECURETTY is not set
@@ -546,7 +526,6 @@ CONFIG_DEFAULT_DEPMOD_FILE="modules.dep"
 # Linux System Utilities
 #
 CONFIG_BLOCKDEV=y
-CONFIG_FATATTR=y
 CONFIG_FSTRIM=y
 CONFIG_MDEV=y
 CONFIG_FEATURE_MDEV_CONF=y
@@ -554,18 +533,7 @@ CONFIG_FEATURE_MDEV_RENAME=y
 CONFIG_FEATURE_MDEV_RENAME_REGEXP=y
 CONFIG_FEATURE_MDEV_EXEC=y
 CONFIG_FEATURE_MDEV_LOAD_FIRMWARE=y
-CONFIG_MOUNT=y
-# CONFIG_FEATURE_MOUNT_FAKE is not set
-# CONFIG_FEATURE_MOUNT_VERBOSE is not set
-# CONFIG_FEATURE_MOUNT_HELPERS is not set
-CONFIG_FEATURE_MOUNT_LABEL=y
-# CONFIG_FEATURE_MOUNT_NFS is not set
-# CONFIG_FEATURE_MOUNT_CIFS is not set
-CONFIG_FEATURE_MOUNT_FLAGS=y
-CONFIG_FEATURE_MOUNT_FSTAB=y
-CONFIG_FEATURE_MOUNT_OTHERTAB=y
 CONFIG_REV=y
-CONFIG_UEVENT=y
 # CONFIG_ACPID is not set
 # CONFIG_FEATURE_ACPID_COMPAT is not set
 CONFIG_BLKID=y
@@ -611,6 +579,15 @@ CONFIG_FEATURE_HWCLOCK_ADJTIME_FHS=y
 # CONFIG_MKSWAP is not set
 # CONFIG_FEATURE_MKSWAP_UUID is not set
 CONFIG_MORE=y
+CONFIG_MOUNT=y
+# CONFIG_FEATURE_MOUNT_FAKE is not set
+# CONFIG_FEATURE_MOUNT_VERBOSE is not set
+# CONFIG_FEATURE_MOUNT_HELPERS is not set
+CONFIG_FEATURE_MOUNT_LABEL=y
+# CONFIG_FEATURE_MOUNT_NFS is not set
+# CONFIG_FEATURE_MOUNT_CIFS is not set
+CONFIG_FEATURE_MOUNT_FLAGS=y
+CONFIG_FEATURE_MOUNT_FSTAB=y
 CONFIG_PIVOT_ROOT=y
 # CONFIG_RDATE is not set
 # CONFIG_RDEV is not set
@@ -620,7 +597,6 @@ CONFIG_PIVOT_ROOT=y
 # CONFIG_SCRIPTREPLAY is not set
 # CONFIG_SETARCH is not set
 # CONFIG_SWAPONOFF is not set
-# CONFIG_FEATURE_SWAPON_DISCARD is not set
 # CONFIG_FEATURE_SWAPON_PRI is not set
 CONFIG_SWITCH_ROOT=y
 CONFIG_UMOUNT=y
@@ -663,19 +639,10 @@ CONFIG_FEATURE_VOLUMEID_SQUASHFS=y
 # Miscellaneous Utilities
 #
 # CONFIG_CONSPY is not set
-# CONFIG_CROND is not set
-# CONFIG_FEATURE_CROND_D is not set
-# CONFIG_FEATURE_CROND_CALL_SENDMAIL is not set
-CONFIG_FEATURE_CROND_DIR=""
-CONFIG_I2CGET=y
-CONFIG_I2CSET=y
-CONFIG_I2CDUMP=y
-CONFIG_I2CDETECT=y
 CONFIG_LESS=y
 CONFIG_FEATURE_LESS_MAXLINES=9999999
 CONFIG_FEATURE_LESS_BRACKETS=y
 CONFIG_FEATURE_LESS_FLAGS=y
-CONFIG_FEATURE_LESS_TRUNCATE=y
 # CONFIG_FEATURE_LESS_MARKS is not set
 # CONFIG_FEATURE_LESS_REGEXP is not set
 # CONFIG_FEATURE_LESS_WINCH is not set
@@ -686,8 +653,6 @@ CONFIG_FEATURE_LESS_TRUNCATE=y
 # CONFIG_NANDDUMP is not set
 # CONFIG_RFKILL is not set
 CONFIG_SETSERIAL=y
-# CONFIG_TASKSET is not set
-# CONFIG_FEATURE_TASKSET_FANCY is not set
 # CONFIG_UBIATTACH is not set
 # CONFIG_UBIDETACH is not set
 CONFIG_UBIMKVOL=y
@@ -710,6 +675,10 @@ CONFIG_FEATURE_BEEP_LENGTH_MS=0
 # CONFIG_FEATURE_CHAT_VAR_ABORT_LEN is not set
 # CONFIG_FEATURE_CHAT_CLR_ABORT is not set
 # CONFIG_CHRT is not set
+# CONFIG_CROND is not set
+# CONFIG_FEATURE_CROND_D is not set
+# CONFIG_FEATURE_CROND_CALL_SENDMAIL is not set
+CONFIG_FEATURE_CROND_DIR=""
 # CONFIG_CRONTAB is not set
 # CONFIG_DC is not set
 # CONFIG_FEATURE_DC_LIBM is not set
@@ -725,7 +694,7 @@ CONFIG_FEATURE_BEEP_LENGTH_MS=0
 CONFIG_FLASHCP=y
 CONFIG_FLASH_LOCK=y
 CONFIG_FLASH_UNLOCK=y
-CONFIG_FLASH_ERASEALL=y
+# CONFIG_FLASH_ERASEALL is not set
 # CONFIG_IONICE is not set
 # CONFIG_INOTIFYD is not set
 # CONFIG_LAST is not set
@@ -751,6 +720,8 @@ CONFIG_MOUNTPOINT=y
 # CONFIG_RX is not set
 # CONFIG_SETSID is not set
 # CONFIG_STRINGS is not set
+# CONFIG_TASKSET is not set
+# CONFIG_FEATURE_TASKSET_FANCY is not set
 CONFIG_TIME=y
 # CONFIG_TIMEOUT is not set
 # CONFIG_TTYSIZE is not set
@@ -770,13 +741,6 @@ CONFIG_NC_EXTRA=y
 CONFIG_PING=y
 # CONFIG_PING6 is not set
 CONFIG_FEATURE_FANCY_PING=y
-CONFIG_WGET=y
-# CONFIG_FEATURE_WGET_STATUSBAR is not set
-CONFIG_FEATURE_WGET_AUTHENTICATION=y
-# CONFIG_FEATURE_WGET_LONG_OPTIONS is not set
-CONFIG_FEATURE_WGET_TIMEOUT=y
-CONFIG_FEATURE_WGET_OPENSSL=y
-CONFIG_FEATURE_WGET_SSL_HELPER=y
 CONFIG_WHOIS=y
 # CONFIG_FEATURE_IPV6 is not set
 # CONFIG_FEATURE_UNIX_LOCAL is not set
@@ -793,13 +757,13 @@ CONFIG_ETHER_WAKE=y
 CONFIG_FTPD=y
 CONFIG_FEATURE_FTP_WRITE=y
 CONFIG_FEATURE_FTPD_ACCEPT_BROKEN_LIST=y
-CONFIG_FEATURE_FTP_AUTHENTICATION=y
 # CONFIG_FTPGET is not set
 # CONFIG_FTPPUT is not set
 # CONFIG_FEATURE_FTPGETPUT_LONG_OPTIONS is not set
 CONFIG_HOSTNAME=y
 # CONFIG_HTTPD is not set
 # CONFIG_FEATURE_HTTPD_RANGES is not set
+# CONFIG_FEATURE_HTTPD_USE_SENDFILE is not set
 # CONFIG_FEATURE_HTTPD_SETUID is not set
 # CONFIG_FEATURE_HTTPD_BASIC_AUTH is not set
 # CONFIG_FEATURE_HTTPD_AUTH_MD5 is not set
@@ -838,7 +802,6 @@ CONFIG_IP=y
 CONFIG_FEATURE_IP_ADDRESS=y
 CONFIG_FEATURE_IP_LINK=y
 CONFIG_FEATURE_IP_ROUTE=y
-CONFIG_FEATURE_IP_ROUTE_DIR="/etc/iproute2"
 # CONFIG_FEATURE_IP_TUNNEL is not set
 # CONFIG_FEATURE_IP_RULE is not set
 # CONFIG_FEATURE_IP_SHORT_FORMS is not set
@@ -857,7 +820,6 @@ CONFIG_FEATURE_IP_ROUTE_DIR="/etc/iproute2"
 # CONFIG_NSLOOKUP is not set
 # CONFIG_NTPD is not set
 # CONFIG_FEATURE_NTPD_SERVER is not set
-# CONFIG_FEATURE_NTPD_CONF is not set
 # CONFIG_PSCAN is not set
 CONFIG_ROUTE=y
 # CONFIG_SLATTACH is not set
@@ -891,7 +853,6 @@ CONFIG_FEATURE_TELNET_AUTOLOGIN=y
 CONFIG_DHCPD_LEASES_FILE=""
 CONFIG_UDHCPC=y
 # CONFIG_FEATURE_UDHCPC_ARPING is not set
-CONFIG_FEATURE_UDHCPC_SANITIZEOPT=y
 # CONFIG_FEATURE_UDHCP_PORT is not set
 CONFIG_UDHCP_DEBUG=9
 CONFIG_FEATURE_UDHCP_RFC3397=y
@@ -901,6 +862,11 @@ CONFIG_UDHCPC_SLACK_FOR_BUGGY_SERVERS=80
 CONFIG_IFUPDOWN_UDHCPC_CMD_OPTIONS=""
 # CONFIG_UDPSVD is not set
 # CONFIG_VCONFIG is not set
+CONFIG_WGET=y
+# CONFIG_FEATURE_WGET_STATUSBAR is not set
+CONFIG_FEATURE_WGET_AUTHENTICATION=y
+# CONFIG_FEATURE_WGET_LONG_OPTIONS is not set
+CONFIG_FEATURE_WGET_TIMEOUT=y
 # CONFIG_ZCIP is not set
 
 #
@@ -1005,7 +971,6 @@ CONFIG_ASH_GETOPTS=y
 # CONFIG_ASH_BUILTIN_ECHO is not set
 CONFIG_ASH_BUILTIN_PRINTF=y
 CONFIG_ASH_BUILTIN_TEST=y
-CONFIG_ASH_HELP=y
 # CONFIG_ASH_CMDCMD is not set
 # CONFIG_ASH_MAIL is not set
 CONFIG_ASH_OPTIMIZE_FOR_SIZE=y

rules/curl/default.bash

@@ -35,11 +35,6 @@ build()
 host_install()
 {
     $cmd_make install
-    # make available for cross compilation
-    for f in "${cfg_dir_toolchain_sysroot}/usr/lib/"libcurl*so*; do
-        echo "Doing $f"
-        ln -s -f "$f" "${cfg_dir_toolchain}/lib"
-    done
 }
 
 target_install()

rules/dune/default.bash

@@ -1,6 +1,6 @@
 version=\
 (
-    'master'
+    'mission/necsave'
 )
 
 requires=\

rules/escc/default.bash

@@ -1,6 +1,6 @@
 version=\
 (
-    '1.0.71'
+    '1.0.6'
 )
 
 url=\
@@ -10,7 +10,7 @@ url=\
 
 md5=\
 (
-    '075c9256fe20cf6ce867dc2b1c974ebe'
+    '07783e66e27601ab0a8250c328b3d6bf'
 )
 
 if [ -d "$cfg_dir_builds/linux/linux-"* ]; then

rules/exiftool/default.bash

@@ -1,37 +0,0 @@
-version=\
-(
-  "10.96"
-)
-
-url=\
-(
-  "https://lsts.pt/glued/exiftoolBin-${version}.tar.gz"
-)
-
-md5=\
-(
-  "71d52bf2d75f023b844dd8c9100daaff"
-)
-
-maintainer=\
-(
-  'Pedro Gonçalves <pedro@lsts.pt>'
-)
-
-requires=\
-(
-    'perl/default'
-)
-
-post_unpack()
-{
-    $cmd_cp -r ../exiftoolBin-${version}/* .
-}
-
-target_install()
-{
-   $cmd_cp -rv usr/* $cfg_dir_toolchain_sysroot/usr/
-   $cmd_cp -rv usr/* $cfg_dir_rootfs/usr/
-   $cmd_cp -rv usr/local/bin/* $cfg_dir_rootfs/usr/bin/
-}
-

rules/exiv2/default.bash

@@ -1,56 +0,0 @@
-version=\
-(
-  "0.25"
-)
-
-url=\
-(
-  "http://lsts.pt/glued/exiv2-${version}.tar.gz"
-)
-
-md5=\
-(
-  "258d4831b30f75a01e0234065c6c2806"
-)
-
-maintainer=\
-(
-    'Pedro Gonçalves <pedro@lsts.pt>'
-)
-
-requires=\
-(
-    "gettext/host"
-)
-
-configure()
-{
-  ./configure \
-    --datadir="$cfg_dir_toolchain_sysroot" \
-    --prefix="$cfg_dir_rootfs/usr" \
-    --includedir="$cfg_dir_toolchain_sysroot/usr/include" \
-    --enable-cross-compile \
-    --build=$cfg_target_linux \
-    --host="$cfg_target_canonical" \
-    --enable-shared \
-    --disable-static \
-    --disable-xmp
-}
-
-build()
-{
-  $cmd_make
-}
-
-host_install()
-{
-  $cmd_make install
-}
-
-target_install()
-{
-  # Libs:
-  for f in "$cfg_dir_rootfs/lib/"libexiv2*; do
-      cp -av "$f" "$cfg_dir_toolchain_sysroot/usr/lib"
-  done
-}

rules/ffmpeg/default.bash

@@ -15,14 +15,12 @@ md5=\
 
 configure()
 {
-    mkdir -p ../build
     ./configure \
         --sysroot="$cfg_dir_toolchain_sysroot" \
         --prefix="$cfg_dir_rootfs/usr" \
         --incdir="$cfg_dir_toolchain_sysroot/usr/include" \
         --enable-cross-compile \
         --cross-prefix="$cfg_target_canonical-" \
-        --libdir="$cfg_dir_builds/ffmpeg/build" \
         --target-os="linux" \
         --enable-shared \
         --disable-static \
@@ -41,16 +39,10 @@ host_install()
     $cmd_make \
 	LIBDIR="$cfg_dir_toolchain_sysroot/usr/lib" \
         install-headers
-
-    $cmd_make \
-        install-libs
 }
 
 target_install()
 {
     $cmd_make \
         install-libs
-
-    $cmd_cp -r "$cfg_dir_builds/ffmpeg/build/"* "$cfg_dir_rootfs/usr/lib/"
-    $cmd_cp -r "$cfg_dir_builds/ffmpeg/build/"* "$cfg_dir_toolchain_sysroot/usr/lib/"
 }

rules/filesystem/fs/etc/rc.d/check_wlan

@@ -1,15 +0,0 @@
-start()
-{
-    if [ ! -f /opt/check_wlan ]; then
-        cp -ri /etc/check_wlan /opt/
-    fi
-
-    sh /opt/check_wlan  < /dev/null > /dev/null 2>&1 &
-}
-
-stop()
-{
-    echo "* Stopping process..."
-    killall sh /opt/check_wlan -9 > /dev/null 2>&1
-    echo "* Process not running."
-}

rules/filesystem/fs/etc/rc.d/network-wlan

@@ -1,87 +0,0 @@
-start()
-{
-    ifconfig wlan0 up
-    if [ -n "$cfg_eth_ext_ip$cfg_eth_prv_ip" ]; then
-        while [ 1 ]; do
-            echo "* Waiting for wlan0 device..."
-            ifconfig wlan0 > /dev/null 2>&1
-            [ $? -eq 0 ] && break
-            usleep 250000
-        done
-    fi
-
-    if [ -n "$cfg_bridge0_ip" ]; then
-        for itf in $cfg_bridge0_itfs; do
-            ifconfig $itf 0.0.0.0
-        done
-
-        brctl addbr bridge0
-
-        for itf in $cfg_bridge0_itfs; do
-            brctl addif bridge0 $itf
-        done
-
-        ifconfig bridge0 $cfg_bridge0_ip netmask $cfg_bridge0_nmask up
-        ifconfig bridge0 multicast
-        route add -net 224.0.0.0 netmask 240.0.0.0 dev bridge0
-    fi
-
-    # Public ethernet.
-    if [ -n "$cfg_eth_ext_ip" ]; then
-        if [ -n "$cfg_eth_ext_mk" ]; then
-            ifconfig wlan0 "$cfg_eth_ext_ip" netmask "$cfg_eth_ext_mk" up
-        else
-            ifconfig wlan0 "$cfg_eth_ext_ip" up
-        fi
-        ifconfig wlan0 multicast
-        route add -net 224.0.0.0 netmask 240.0.0.0 dev wlan0
-
-        # Fixed mac address with $cfg_eth_ext_mac based derivated from IP address $cfg_eth_ext_ip
-        if [ -n "$cfg_eth_ext_mac" ]; then
-          ifconfig wlan0 hw ether $cfg_eth_ext_mac
-        fi
-    fi
-
-    if [ -n "$cfg_eth_ext_gw" ]; then
-        route add default gw "$cfg_eth_ext_gw"
-    fi
-
-    if [ -n "$cfg_eth_ext_dns" ]; then
-        echo "nameserver $cfg_eth_ext_dns" > /etc/resolv.conf
-    fi
-
-    # Private ethernet.
-    if [ -n "$cfg_eth_prv_ip" ]; then
-        ifconfig wlan0:prv "$cfg_eth_prv_ip" up
-    fi
-
-    # Static ARP table.
-    if [ -n "$cfg_arp_table" ]; then
-        for e in $cfg_arp_table; do
-            ip="$(echo $e | cut -f1 -d'|')"
-            mac="$(echo $e | cut -f2 -d'|')"
-            arp -s "$ip" "$mac"
-        done
-    fi
-
-    iw wlan0 connect LSTS
-    ifconfig eth0 down
-}
-
-stop()
-{
-    # Public ethernet.
-    if [ -n "$cfg_eth_ext_gw" ]; then
-        route del default
-    fi
-
-    if [ -n "$cfg_eth_ext_ip" ]; then
-        route del -net 224.0.0.0 netmask 240.0.0.0 dev wlan0
-        ifconfig wlan0 down
-    fi
-
-    # Private ethernet.
-    if [ -n "$cfg_eth_prv_ip" ]; then
-        ifconfig wlan0:prv down
-    fi
-}

rules/filesystem/fs/etc/rc.d/set-rtc

@@ -1,11 +0,0 @@
-start()
-{
-    echo "* Starting set of rtc..."
-    echo ds1307 0x68 > /sys/class/i2c-adapter/i2c-1/new_device
-    hwclock -s
-}
-
-stop()
-{
-    echo "* Done..."
-}

rules/filesystem/fs/etc/rc.d/upgrade

@@ -60,17 +60,24 @@ new_unpack()
     return 1
 }
 
-kernel_mtd_part()
+kernel_dst()
 {
-    echo -n "* Detecting kernel MTD partition... "
+    echo -n "* Detecting kernel destination... "
 
+    # Kernel resides in the root filesystem.
     if [ -d /boot/extlinux ]; then
-        echo "not present"
+        echo "filesystem"
         return 0
     fi
 
     if ! [ -f /proc/mtd ]; then
-        echo "not present"
+        echo "filesystem"
+        return 0
+    fi
+
+    grep 'uboot=ext2' /proc/cmdline > /dev/null 2>&1
+    if [ $? -eq 0 ]; then
+        echo "filesystem"
         return 0
     fi
 
@@ -78,65 +85,21 @@ kernel_mtd_part()
     if [ -z "$fw_kernel_mtd" ]; then
         export fw_kernel_mtd="$(grep \"Kernel\" /proc/mtd | cut -f1 -d':')"
         if [ -z "$fw_kernel_mtd" ]; then
-            echo "not present"
+            echo "failed to detect kernel's MTD partition"
             return 1
         fi
     fi
 
-    echo "$fw_kernel_mtd"
+    echo "mtd"
     return 0
 }
 
-uboot_mtd_part()
-{
-    echo -n "* Detecting u-boot MTD partition... "
-    if ! [ -f /proc/mtd ]; then
-        echo "filesystem"
-        return 0
-    fi
-
-    export fw_uboot_mtd="$(grep \"uboot\" /proc/mtd | cut -f1 -d':')"
-    if [ -z "$fw_uboot_mtd" ]; then
-        export fw_uboot_mtd="$(grep \"u-boot\" /proc/mtd | cut -f1 -d':')"
-        if [ -z "$fw_uboot_mtd" ]; then
-            echo "not present"
-            return 1
-        fi
-    fi
-
-    echo "$fw_uboot_mtd"
-    return 0
-}
-
-uboot_mtd_upgrade()
-{
-    bin="$base/.glued-new/boot/u-boot.bin"
-
-    if ! [ -f "$bin" ]; then
-        return 0
-    fi
-
-    if [ -z "$fw_uboot_mtd" ]; then
-        return 0
-    fi
-
-    echo -n "* Upgrading u-boot MTD partition... "
-    "$flashcp" -v "$bin" /dev/"$fw_uboot_mtd"
-    if [ $? -ne 0 ]; then
-        echo "failed"
-        return 1
-    fi
-
-    echo "done"
-    return 0
-}
-
-kernel_mtd_upgrade()
+kernel_upgrade()
 {
     # Upgrade MTD
     if [ -n "$fw_kernel_mtd" ]; then
         echo -n "* Upgrading kernel... "
-        "$flashcp" -v "$base/.glued-new/boot/kernel" /dev/"$fw_kernel_mtd"
+        "$flashcp" -v "$base/.glued-new/boot/kernel" /dev/"$fw_kernel_mtd" > /dev/null 2>&1
         if [ $? -ne 0 ]; then
             echo "failed"
             return 1
@@ -239,19 +202,12 @@ rpi2_boot_part_upgrade()
         fi
     done
 
-    for f in overlays; do
-        if [ -d "/mnt/$f" ]; then
-            echo -en "* $label: Replacing $f... "
-	    rm -rf "/mnt/$f" && cp -r "$base/.glued-new/boot/$f" /mnt
-            echo 'done'
-        fi
-    done
-
-    for dtb in "$base/.glued-new/boot/"*.dtb; do
+    dtb="bcm2709-rpi-2-b.dtb"
+    if [ -f "/mnt/$dtb" ]; then
         echo -en "* $label: Replacing $dtb... "
-        cp "$dtb" "/mnt"
+        cp "$base/.glued-new/boot/board.dtb" "/mnt/$dtb"
         echo 'done'
-    done
+    fi
 
     kernel='kernel7.img'
     if [ -f "/mnt/$kernel" ]; then
@@ -272,17 +228,15 @@ rpi2_boot_part_upgrade()
     return 0
 }
 
-# Check if board is a Raspberry Pi 2/3.
+# Check if board is a Raspberry Pi 2.
 rpi2_boot_part_upgrade_check()
 {
-    for machine in 'bcm2709' 'raspberry pi'; do
-        dmesg | grep Machine | grep -i "$machine" > /dev/null 2>&1
-        if [ $? -eq 0 ]; then
-            echo "* rpi2: machine detected"
-            rpi2_boot_part_upgrade "rpi2" "/dev/mmcblk0p1"
-            return 0
-        fi
-    done
+    dmesg | grep Machine | grep BCM2709 > /dev/null 2>&1
+    if [ $? -eq 0 ]; then
+        echo "* rpi2: machine detected"
+        rpi2_boot_part_upgrade "rpi2" "/dev/mmcblk0p1"
+        return 0
+    fi
 }
 
 old_move()
@@ -330,13 +284,11 @@ start()
 {
     clean
     version || return 1
-    kernel_mtd_part || return 1
-    uboot_mtd_part || return 1
+    kernel_dst || return 1
     new_unpack || return 1
     uboot_part_upgrade_check || return 1
     rpi2_boot_part_upgrade_check || return 1
-    kernel_mtd_upgrade || return 1
-    uboot_mtd_upgrade || return 1
+    kernel_upgrade || return 1
     old_move || return 1
 }
 

rules/gcc/common.bash

@@ -1,6 +1,6 @@
 version=\
 (
-    '5.4.0'
+    '4.9.3'
 )
 
 url=\
@@ -10,7 +10,7 @@ url=\
 
 md5=\
 (
-    '4c626ac2a83ef30dfb9260e6f59c2b30'
+    '6f831b4d251872736e8e9cc09746f327'
 )
 
 build_dir=$pkg_var

rules/gcc/cross.bash

@@ -49,15 +49,10 @@ host_install()
 
 target_install()
 {
-    libdir=lib
-    if [ -d "$cfg_dir_toolchain/$cfg_target_canonical/lib64" ]; then
-        libdir=lib64
-    fi
-
     $cmd_mkdir \
-        "$cfg_dir_rootfs/usr/$libdir" &&
+        "$cfg_dir_rootfs/usr/lib" &&
 
-    for f in "$cfg_dir_toolchain/$cfg_target_canonical/$libdir/"{libgcc_s,libstdc++}.so*; do
+    for f in "$cfg_dir_toolchain/$cfg_target_canonical/lib/"{libgcc_s,libstdc++}.so*; do
         base="$(basename $f)"
 
         if [ $(echo "$base" | grep '\.py' 2> /dev/null) ]; then

rules/gdb/common.bash

@@ -1,6 +1,6 @@
 version=\
 (
-    '7.10.1'
+    '7.8.2'
 )
 
 url=\
@@ -10,5 +10,5 @@ url=\
 
 md5=\
 (
-    '39e654460c9cdd80200a29ac020cfe11'
+    'a80cf252ed2e775d4e4533341bbf2459'
 )

rules/glibc/common.bash

@@ -1,6 +1,6 @@
 version=\
 (
-    '2.24'
+    '2.22'
 )
 
 url=\
@@ -10,7 +10,7 @@ url=\
 
 md5=\
 (
-    '97dc5517f92016f3d70d83e3162ad318'
+    'e51e02bf552a0a1fbbdc948fb2f5e83c'
 )
 
 maintainer=\

rules/gmp/host.bash

@@ -1,6 +1,6 @@
 version=\
 (
-    '6.1.2'
+    '5.0.4'
 )
 
 url=\
@@ -10,7 +10,7 @@ url=\
 
 md5=\
 (
-    '8ddbb26dc3bd4e2302984debba1406a5'
+    '50c3edcb7c9438e04377ee9a1a061b79'
 )
 
 maintainer=\

rules/htop/default.bash

@@ -1,37 +0,0 @@
-version=\
-(
-    '2.0.2'
-)
-
-url=\
-(
-    "https://hisham.hm/htop/releases/$version/htop-$version.tar.gz"
-)
-
-md5=\
-(
-    '7d354d904bad591a931ad57e99fea84a'
-)
-
-maintainer=\
-(
-    'Jose Pinto <zepinto@lsts.pt>'
-)
-
-build()
-{
-    $cmd_make
-}
-
-configure()
-{
-    cd "../htop-$version"
-    ./configure --disable-unicode --prefix="${cfg_dir_rootfs}"
-}
-
-target_install()
-{
-    cd "../htop-$version"
-    $cmd_make install
-}
-

rules/iw/default.bash

@@ -1,34 +0,0 @@
-version=\
-(
-    "4.9"
-)
-
-url=\
-(
-    "http://lsts.pt/glued/iw-$version.tar.bz2"
-)
-
-md5=\
-(
-  "ae8ccaa154449300c2c02eb90a37eebb"
-)
-
-maintainer=\
-(
-    'Pedro Gonçalves <pedro@lsts.pt>'
-)
-
-configure()
-{
-    mv "../iw_$version/etc" "../iw-$version/"
-    mv "../iw_$version/lib" "../iw-$version/"
-    mv "../iw_$version/sbin" "../iw-$version/"
-}
-
-target_install()
-{
-    $cmd_cp -r "etc/"* "$cfg_dir_rootfs/etc/"
-    $cmd_cp -r "sbin/"* "$cfg_dir_rootfs/sbin/"
-    $cmd_cp -r "lib/"* "$cfg_dir_rootfs/lib/"
-    $cmd_cp -r "$pkg_dir/fs/"* "$cfg_dir_rootfs/"
-}

rules/iw/fs/etc/check_wlan

@@ -1,46 +0,0 @@
-#!/bin/bash
-export PATH=/bin:/sbin:/usr/bin:/usr/sbin:/usr/bin:/bin
-
-############################# USER INPUT ###########################
-
-ip_dest=10.0.30.3
-
-####################################################################
-
-
-############### DON'T EDIT ##########################################
-
-check_interval=1
-log=/opt/.wifi.log
-wlan=wlan0
-eth=eth0
-
-exec 1> /dev/null
-exec 2>> $log
-echo $(date) > $log
-# without check_interval set, we risk a 0 sleep = busy loop
-if [ ! "$check_interval" ]; then
-        echo "No check interval set!" >> $log
-        exit 1
-fi
-
-startWifi () {
-   iw wlan0 connect LSTS >> $log
-}
-
-ifconfig $eth down
-ifconfig $wlan up
-
-while [ 1 ]; do
-        ping -q -c1 $ip_dest > /dev/null
-        if [ $? -ne 0 ]; then
-                echo $(date)" attempting restart..." >> $log
-                startWifi
-                sleep 1
-        else
-                echo "IS LINKED" >> $log
-                sleep $check_interval
-        fi
-done
-
-#####################################################################

rules/kmod/host.bash

@@ -16,5 +16,5 @@ build()
 host_install()
 {
     $cmd_make install &&
-    ln -fs ../bin/kmod "$cfg_dir_toolchain/sbin/depmod"
+    ln -fs kmod "$cfg_dir_toolchain/sbin/depmod"
 }

rules/libav/default.bash

@@ -15,10 +15,9 @@ md5=\
 
 configure()
 {
-    $cmd_mkdir build
     ./configure \
         --sysroot="$cfg_dir_toolchain_sysroot" \
-        --prefix="$cfg_dir_builds/libav/libav-$version/build/" \
+        --prefix="$cfg_dir_rootfs/usr" \
         --cross-prefix="$cfg_target_canonical-" \
         --target-os="linux" \
         --enable-memalign-hack \
@@ -33,14 +32,8 @@ build()
     $cmd_make
 }
 
-host_install()
-{
-    $cmd_make install
-    $cmd_cp -r "build/"*        "$cfg_dir_toolchain_sysroot/usr/"
-}
-
 target_install()
 {
-    $cmd_cp -r "build/"*        "$cfg_dir_rootfs/usr/"
-
+    $cmd_make \
+        install
 }

rules/libdc1394/default.bash

@@ -19,7 +19,6 @@ configure()
         --prefix="$cfg_dir_toolchain_sysroot/usr" \
         --target="$cfg_target_canonical" \
         --host="$cfg_target_canonical" \
-        --disable-examples \
         --build="$cfg_host_canonical"
 }
 

rules/libpng/default.bash

@@ -1,6 +1,6 @@
 version=\
 (
-    '1.6.23'
+    '1.6.19'
 )
 
 url=\
@@ -10,7 +10,7 @@ url=\
 
 md5=\
 (
-    '9b320a05ed4db1f3f0865c8a951fd9aa '
+    '1e6a458429e850fc93c1f3b6dc00a48f'
 )
 
 configure()

rules/libraw1394/default.bash

@@ -1,41 +0,0 @@
-version=\
-(
-    '2.0.5'
-)
-
-url=\
-(
-    "http://downloads.sourceforge.net/libraw1394/libraw1394-$version.tar.gz"
-)
-
-md5=\
-(
-    '1db64231c78540c32859b591cb8b40cf'
-)
-
-configure()
-{
-    "../libraw1394-$version/configure" \
-        --prefix="$cfg_dir_toolchain_sysroot/usr" \
-        --target="$cfg_target_canonical" \
-        --host="$cfg_target_canonical" \
-        --disable-examples \
-        --build="$cfg_host_canonical"
-}
-
-build()
-{
-    $cmd_make
-}
-
-host_install()
-{
-    $cmd_make install
-}
-
-target_install()
-{
-    for f in "$cfg_dir_toolchain_sysroot/usr/lib/"libraw1394*so*; do
-        $cmd_target_strip "$f" -o "$cfg_dir_rootfs/lib/$(basename "$f")"
-    done
-}

rules/linux-headers/cross.bash

@@ -1,16 +1,16 @@
 version=\
 (
-    '4.19.60'
+    '3.14.63'
 )
 
 url=\
 (
-    "https://www.kernel.org/pub/linux/kernel/v4.x/linux-$version.tar.xz"
+    "https://www.kernel.org/pub/linux/kernel/v3.x/linux-$version.tar.xz"
 )
 
 md5=\
 (
-    '3f8dfed50f9d9ff7247b3d6da4fd35a3'
+    '6cf8a6b23849f47f511e0e46cfdb6392'
 )
 
 maintainer=\

rules/linux/default.bash

@@ -1,16 +1,16 @@
 version=\
 (
-    '4.4.66'
+    '3.14.63'
 )
 
 url=\
 (
-    "https://www.kernel.org/pub/linux/kernel/v4.x/linux-$version.tar.xz"
+    "https://www.kernel.org/pub/linux/kernel/v3.x/linux-$version.tar.xz"
 )
 
 md5=\
 (
-    '5353de56bf4621a35afc4384c7e51f30'
+    '6cf8a6b23849f47f511e0e46cfdb6392'
 )
 
 maintainer=\
@@ -25,62 +25,13 @@ requires=\
     'lz4/host'
 )
 
-# This variable is updated by find_patches().
-patches=()
-
-# Major/Minor version.
-linux_mm_version()
-{
-    echo "$version" | cut -f1-2 -d.
-}
-
-# Major/Minor/Patch version.
-linux_mmp_version()
-{
-    echo "$version" | cut -f1 -d-
-}
-
-find_patches()
-{
-    patches=(\
-        $(ls -1 \
-             "$pkg_dir/patches/$version/"*.patch \
-             "$pkg_dir/patches/$(linux_mmp_version)/"*.patch \
-             "$pkg_dir/patches/$(linux_mm_version)/"*.patch \
-             "$cfg_dir_system/patches/linux/$version/"*.patch \
-             "$cfg_dir_system/patches/linux/$(linux_mmp_version)/"*.patch \
-             "$cfg_dir_system/patches/linux/$(linux_mm_version)/"*.patch \
-             2> /dev/null | awk '!a[$0]++')
-    )
-}
-
-find_patches
-
-# Get configuration file.
-linux_cfg_file()
-{
-    for f in "$version" "$(linux_mmp_version)" "$(linux_mm_version)"; do
-        f="$cfg_dir_system/cfg/linux-$f.cfg"
-        if [ -f "$f" ]; then
-            echo "$f"
-            return 0
-        fi
-
-        echo "Candidate kernel configuration file '$f' doesn't exist." 1>&2
-    done
-
-    echo "ERROR: failed to find a valid kernel configuration file." 1>&2
-    return 1
-}
-
 post_unpack()
 {
-    n=0; while [ -n "${patches[$n]}" ]; do
-             patch="${patches[$n]}"
-             echo "* Applying $patch..."
-             (ucat "$patch" | patch -p1) || return 1
-             let n++
-         done
+    patches=$(ls "$pkg_dir/patches/$version/"*.patch\
+	"$cfg_dir_system/patches/linux/$version/"*.patch 2>/dev/null)
+    if [ -n "$patches" ]; then
+        cat $patches | patch -p1
+    fi
 
     if [ -d "$cfg_dir_toolchain/firmware" ]; then
         tar -C "$cfg_dir_toolchain/firmware" -c -v -f - . | tar -C firmware -x -v -f -
@@ -90,7 +41,7 @@ post_unpack()
 refresh()
 {
     for rule in configure build target_install; do
-        if [ "$(linux_cfg_file)" -nt "$cfg_dir_builds/linux/$pkg_var/.$rule" ]; then
+        if [ "$cfg_dir_system/cfg/linux-${version}.cfg" -nt "$cfg_dir_builds/linux/$pkg_var/.$rule" ]; then
             rm "$cfg_dir_builds/linux/$pkg_var/.$rule"
         fi
     done
@@ -100,11 +51,9 @@ configure()
 {
     $cmd_make \
         ARCH=${cfg_target_linux} \
-        mrproper || return 1
+        mrproper &&
 
-    cfg="$(linux_cfg_file)"
-    [ -n "$cfg" ] || return 1
-    $cmd_cp "$cfg" .config || return 1
+    cp "$cfg_dir_system/cfg/linux-${version}.cfg" .config &&
 
     if [ -f "$cfg_dir_system/files/initramfs_init.sh" ]; then
         $cmd_mkdir initramfs &&
@@ -123,18 +72,17 @@ build()
 {
     $cmd_make \
         CROSS_COMPILE=$cfg_target_canonical- \
-        ARCH=$cfg_target_linux || return 1
-
+        ARCH=$cfg_target_linux &&
     $cmd_make \
         CROSS_COMPILE=$cfg_target_canonical- \
         ARCH=$cfg_target_linux \
-        modules || return 1
+        modules &&
 
     if [ "$(basename $cfg_target_linux_kernel)" = 'uImage' ]; then
         $cmd_make \
             CROSS_COMPILE=$cfg_target_canonical- \
             ARCH=$cfg_target_linux \
-            uImage || return 1
+            uImage
     fi
 
     # Compressed image.
@@ -142,7 +90,7 @@ build()
         $cmd_make \
             CROSS_COMPILE=$cfg_target_canonical- \
             ARCH=$cfg_target_linux \
-            zImage || return 1
+            zImage
     fi
 
     # Device tree blob.
@@ -150,7 +98,7 @@ build()
         $cmd_make \
             CROSS_COMPILE=$cfg_target_canonical- \
             ARCH=$cfg_target_linux \
-            dtbs || return 1
+            dtbs
     fi
 
     if [ -n "${cfg_target_linux_size}" ]; then
@@ -160,6 +108,15 @@ build()
     fi
 }
 
+host_install()
+{
+    # Device tree blobs.
+    if [ -n "$cfg_target_linux_dtb" ]; then
+        $cmd_mkdir "$cfg_dir_toolchain/boot" &&
+            cp -v "$(dirname $cfg_target_linux_dtb)/"*.dtb "$cfg_dir_toolchain/boot"
+    fi
+}
+
 target_install()
 {
     if [ -n "$(file "$cfg_target_linux_kernel" | grep ELF)" ]; then
@@ -175,39 +132,15 @@ target_install()
         return 1
     fi
 
-    # Device tree blobs.
-    dts="arch/$cfg_target_linux/boot/dts"
-    if [ -d "$dts" ]; then
-        $cmd_mkdir "$cfg_dir_rootfs/boot" &&
-            cp -v "$dts/"*.dtb "$cfg_dir_rootfs/boot"
-    fi
-
-    # Device tree overlays.
-    overlays_dir="arch/$cfg_target_linux/boot/dts/overlays"
-    if [ -d "$overlays_dir" ]; then
-	$cmd_mkdir "$cfg_dir_rootfs/boot/overlays" || return 1
-        $cmd_cp "$overlays_dir"/*.dtbo "$cfg_dir_rootfs/boot/overlays" || return 1
-    fi
+    $cmd_make \
+        CROSS_COMPILE="$cfg_target_canonical-" \
+        ARCH="$cfg_target_linux" \
+        INSTALL_MOD_PATH="$cfg_dir_rootfs/usr" \
+        modules_install
 
     $cmd_make \
         CROSS_COMPILE="$cfg_target_canonical-" \
         ARCH="$cfg_target_linux" \
         INSTALL_MOD_PATH="$cfg_dir_rootfs/usr" \
-        KBUILD_VERBOSE=1 \
-        modules_install
-
-    echo $cfg_sys_family
-    if [[ $cfg_sys_family == *rpi* ]]; then
-        echo "RPI family, no need of firmware_install"
-        sleep 2
-    else
-        sleep 2
-        $cmd_make \
-            CROSS_COMPILE="$cfg_target_canonical-" \
-            ARCH="$cfg_target_linux" \
-            INSTALL_MOD_PATH="$cfg_dir_rootfs/usr" \
-            KBUILD_VERBOSE=1 \
-            DEPMOD="$cfg_dir_toolchain/sbin/depmod" \
-            firmware_install
-    fi
+        firmware_install
 }

rules/linux/rpi.bash

@@ -2,19 +2,21 @@
 
 version=\
 (
-    '4.19_2019-07-29'
+    '3.18_2015-06-03'
 )
 
 url=\
 (
-    "http://lsts.pt/glued/rpi-linux-$version.zip"
+    "https://github.com/rasmartins/rpi-linux/archive/rpi-linux-$version.tar.gz"
 )
 
 md5=\
 (
-    'a9fac458f26bf4a3f3d9c981c7e51dd9'
+    '0b0255e50ca358b619bb78653ac2db2e'
 )
 
-build_dir="rpi-linux-rpi-linux-$version"
-
-find_patches
+post_unpack()
+{
+    rmdir "../linux-$version" &&
+        mv "../rpi-linux-rpi-linux-$version" "../linux-$version"
+}

rules/linux/rt.bash

@@ -1,27 +0,0 @@
-. "$cfg_dir_rules/$pkg/default.bash"
-
-version=\
-(
-    '4.4.66-rt79'
-)
-
-url=\
-(
-    "https://www.kernel.org/pub/linux/kernel/v4.x/linux-$(linux_mmp_version).tar.xz"
-    "https://www.kernel.org/pub/linux/kernel/projects/rt/$(linux_mm_version)/patch-$version.patch.gz"
-)
-
-md5=\
-(
-    'd68173a31fb60e2195a4015fe1f83e97'
-    '03be9388659d844c362e507ddba2d777'
-)
-
-maintainer=\
-(
-    'Ricardo Martins <rasm@oceanscan-mst.com>'
-)
-
-patches=("$cfg_dir_downloads/patch-$version.patch.gz" "${patches[@]}")
-
-build_dir="linux-$(linux_mmp_version)"

rules/linux/v3_14.bash

@@ -1,206 +0,0 @@
-version=\
-(
-    '3.14.63'
-)
-
-url=\
-(
-    "https://www.kernel.org/pub/linux/kernel/v3.x/linux-$version.tar.xz"
-)
-
-md5=\
-(
-    '6cf8a6b23849f47f511e0e46cfdb6392'
-)
-
-maintainer=\
-(
-    'Ricardo Martins <rasm@fe.up.pt>'
-)
-
-requires=\
-(
-    'bc/host'
-    'kmod/host'
-    'lz4/host'
-)
-
-# This variable is updated by find_patches().
-patches=()
-
-# Major/Minor version.
-linux_mm_version()
-{
-    echo "$version" | cut -f1-2 -d.
-}
-
-# Major/Minor/Patch version.
-linux_mmp_version()
-{
-    echo "$version" | cut -f1 -d-
-}
-
-find_patches()
-{
-    patches=(\
-        $(ls -1 \
-             "$pkg_dir/patches/$version/"*.patch \
-             "$pkg_dir/patches/$(linux_mmp_version)/"*.patch \
-             "$pkg_dir/patches/$(linux_mm_version)/"*.patch \
-             "$cfg_dir_system/patches/linux/$version/"*.patch \
-             "$cfg_dir_system/patches/linux/$(linux_mmp_version)/"*.patch \
-             "$cfg_dir_system/patches/linux/$(linux_mm_version)/"*.patch \
-             2> /dev/null | awk '!a[$0]++')
-    )
-}
-
-find_patches
-
-# Get configuration file.
-linux_cfg_file()
-{
-    for f in "$version" "$(linux_mmp_version)" "$(linux_mm_version)"; do
-        f="$cfg_dir_system/cfg/linux-$f.cfg"
-        if [ -f "$f" ]; then
-            echo "$f"
-            return 0
-        fi
-
-        echo "Candidate kernel configuration file '$f' doesn't exist." 1>&2
-    done
-
-    echo "ERROR: failed to find a valid kernel configuration file." 1>&2
-    return 1
-}
-
-post_unpack()
-{
-    cp -r ../linux-3.14.63/* ../linux_3.3-3.14.63
-    n=0; while [ -n "${patches[$n]}" ]; do
-             patch="${patches[$n]}"
-             echo "* Applying $patch..."
-             (ucat "$patch" | patch -p1) || return 1
-             let n++
-         done
-
-    if [ -d "$cfg_dir_toolchain/firmware" ]; then
-        tar -C "$cfg_dir_toolchain/firmware" -c -v -f - . | tar -C firmware -x -v -f -
-    fi
-}
-
-refresh()
-{
-    for rule in configure build target_install; do
-        if [ "$(linux_cfg_file)" -nt "$cfg_dir_builds/linux/$pkg_var/.$rule" ]; then
-            rm "$cfg_dir_builds/linux/$pkg_var/.$rule"
-        fi
-    done
-}
-
-configure()
-{
-    $cmd_make \
-        ARCH=${cfg_target_linux} \
-        mrproper || return 1
-
-    cfg="$(linux_cfg_file)"
-    [ -n "$cfg" ] || return 1
-    $cmd_cp "$cfg" .config || return 1
-
-    if [ -f "$cfg_dir_system/files/initramfs_init.sh" ]; then
-        $cmd_mkdir initramfs &&
-        $cmd_cp "$pkg_dir/files/initramfs.conf" . &&
-        $cmd_cp "$cfg_dir_system/files/initramfs_init.sh" initramfs/init.sh &&
-        $cmd_cp "$cfg_dir_rootfs/bin/busybox" initramfs/busybox
-    fi
-
-    yes '' | $cmd_make \
-        CROSS_COMPILE=${cfg_target_canonical}- \
-        ARCH=${cfg_target_linux} \
-        oldconfig
-}
-
-build()
-{
-    $cmd_make \
-        CROSS_COMPILE=$cfg_target_canonical- \
-        ARCH=$cfg_target_linux || return 1
-
-    $cmd_make \
-        CROSS_COMPILE=$cfg_target_canonical- \
-        ARCH=$cfg_target_linux \
-        modules || return 1
-
-    if [ "$(basename $cfg_target_linux_kernel)" = 'uImage' ]; then
-        $cmd_make \
-            CROSS_COMPILE=$cfg_target_canonical- \
-            ARCH=$cfg_target_linux \
-            uImage || return 1
-    fi
-
-    # Compressed image.
-    if [ "$(basename $cfg_target_linux_kernel)" = 'zImage' ]; then
-        $cmd_make \
-            CROSS_COMPILE=$cfg_target_canonical- \
-            ARCH=$cfg_target_linux \
-            zImage || return 1
-    fi
-
-    # Device tree blob.
-    if [ -n "$cfg_target_linux_dtb" ]; then
-        $cmd_make \
-            CROSS_COMPILE=$cfg_target_canonical- \
-            ARCH=$cfg_target_linux \
-            dtbs || return 1
-    fi
-
-    if [ -n "${cfg_target_linux_size}" ]; then
-        dd if="$cfg_target_linux_kernel" of="${cfg_target_linux_kernel}.padded" \
-            ibs="${cfg_target_linux_size}" conv=sync &&
-        mv "${cfg_target_linux_kernel}.padded" "${cfg_target_linux_kernel}"
-    fi
-}
-
-target_install()
-{
-    if [ -n "$(file "$cfg_target_linux_kernel" | grep ELF)" ]; then
-        strip="$(echo $cfg_dir_toolchain/bin/*-strip)"
-        $strip -s -R .comment "$cfg_target_linux_kernel"
-    fi
-
-    # Kernel image.
-    if [ -n "$cfg_target_linux_kernel" ]; then
-        cp -v "$cfg_target_linux_kernel" "$cfg_dir_rootfs/boot/kernel"
-    else
-        echo "ERROR: failed to find kernel image at '$cfg_target_linux_kernel'"
-        return 1
-    fi
-
-    # Device tree blobs.
-    dts="arch/$cfg_target_linux/boot/dts"
-    if [ -d "$dts" ]; then
-        $cmd_mkdir "$cfg_dir_rootfs/boot" &&
-            cp -v "$dts/"*.dtb "$cfg_dir_rootfs/boot"
-    fi
-
-    # Device tree overlays.
-    overlays_dir="arch/$cfg_target_linux/boot/dts/overlays"
-    if [ -d "$overlays_dir" ]; then
-	$cmd_mkdir "$cfg_dir_rootfs/boot/overlays" || return 1
-        $cmd_cp "$overlays_dir"/*.dtbo "$cfg_dir_rootfs/boot/overlays" || return 1
-    fi
-
-    $cmd_make \
-        CROSS_COMPILE="$cfg_target_canonical-" \
-        ARCH="$cfg_target_linux" \
-        INSTALL_MOD_PATH="$cfg_dir_rootfs/usr" \
-        KBUILD_VERBOSE=1 \
-        modules_install
-
-    $cmd_make \
-        CROSS_COMPILE="$cfg_target_canonical-" \
-        ARCH="$cfg_target_linux" \
-        INSTALL_MOD_PATH="$cfg_dir_rootfs/usr" \
-        KBUILD_VERBOSE=1 \
-        firmware_install
-}

rules/lpg/default.bash

@@ -1,38 +0,0 @@
-version=\
-(
-	   "1.2"
-)
-
-url=\
-(
-    "http://lsts.pt/glued/lpg-$version.tar.gz"
-)
-
-md5=\
-(
-    "d71e2f282372a5cb1021d9e457a3d53f"
-)
-
-requires=\
-(
-    'bison/host'
-    'flex/host'
-)
-
-configure()
-{
-    ./configure "$cfg_target_canonical-gcc"
-}
-
-build()
-{
-    $cmd_make \
-	BISON="$cfg_dir_toolchain/bin/bison" \
-	FLEX="$cfg_dir_toolchain/bin/flex"
-    
-}
-
-target_install()
-{
-    $cmd_cp "lpg" "$cfg_dir_rootfs/usr/bin"
-}

rules/memtest86+/default.bash

@@ -1,32 +0,0 @@
-version=\
-(
-    "5.01"
-)
-
-url=\
-(
-    "http://www.lsts.pt/glued/memtest86+-$version.tar.gz"
-)
-
-md5=\
-(
-    "035b85f2edabc9b4a6b0cf6c9c3acf50"
-)
-
-maintainer=\
-(
-    'Tiago Sá Marques <tsmarques@fe.up.pt>'
-)
-
-build()
-{
-    $cmd_make \
-        CC=$cmd_target_cc \
-        CXX=$cmd_target_cxx
-}
-
-target_install()
-{
-    $cmd_cp ./memtest.bin $cfg_dir_rootfs/boot/
-    tar -C "$pkg_dir/fs" --exclude .svn -c -f - . | tar -C "$cfg_dir_rootfs" -x -v -f -
-}

rules/memtest86+/fs/usr/bin/start-memtest

@@ -1,14 +0,0 @@
-#! /bin/sh
-
-echo "Starting memtest in 10 seconds (requires reboot), Ctrl-C to cancel..."
-for r in 0 1 2 3 4 5 6 7 8 9; do
-    printf "."
-    sleep 1
-done
-
-mount -o remount,rw /
-extlinux -o "memtest" /boot/extlinux/
-mount -o remount,ro /
-
-echo "* Rebooting now"
-reboot

rules/mpc/host.bash

@@ -1,16 +1,16 @@
 version=\
 (
-    "1.0.2"
+    "0.9"
 )
 
 url=\
 (
-    "https://ftp.gnu.org/gnu/mpc/mpc-$version.tar.gz"
+    "http://www.multiprecision.org/mpc/download/mpc-$version.tar.gz"
 )
 
 md5=\
 (
-    "68fadff3358fb3e7976c7a398a0af4c3"
+    "0d6acab8d214bd7d1fbbc593e83dd00d"
 )
 
 maintainer=\

rules/mpfr/host.bash

@@ -1,6 +1,6 @@
 version=\
 (
-    '3.1.5'
+    '3.1.3'
 )
 
 url=\
@@ -10,7 +10,7 @@ url=\
 
 md5=\
 (
-    'b1d23a55588e3b2a13e3be66bc69fd8d'
+    '5fdfa3cfa5c86514ee4a241a1affa138'
 )
 
 maintainer=\

rules/necsave/default.bash

@@ -0,0 +1,79 @@
+version=\
+(
+    'master'
+)
+
+branch=\
+(
+    'master'
+)
+
+maintainer=\
+(
+    "Jose Pinto <zepinto@fe.up.pt>"
+)
+
+requires=\
+(
+    'jansson/default'
+    'czmq/default'
+    'boost/default'
+    'cmake/host'
+    'dune/default'
+)
+
+download()
+{
+    git clone -b $branch "git@necsave.info:necsave/communications.git" source &&
+    cd source && 
+    ./update.sh &&
+    cd -
+}
+
+configure()
+{
+    $cmd_mkdir build && cd build
+    PKG_CONFIG_PATH="$cfg_dir_toolchain_sysroot/usr/lib/pkgconfig" \
+    cmake \
+        -DCMAKE_INSTALL_PREFIX="$cfg_dir_toolchain_sysroot/usr/necsave" \
+        -DCMAKE_CXX_COMPILER="$cmd_target_cxx" \
+        -DCMAKE_C_COMPILER="$cmd_target_cc" \
+        -DCMAKE_FIND_ROOT_PATH:PATH="$cfg_dir_toolchain_sysroot/usr" \
+        -DDUNE_HOME="$cfg_dir_toolchain_sysroot/usr" \
+        -DCMAKE_SYSTEM_NAME:STRING=Linux \
+        -DCMAKE_FIND_ROOT_PATH_MODE_INCLUDE:STRING=BOTH \
+        -DCMAKE_FIND_ROOT_PATH_MODE_LIBRARY:STRING=ONLY \
+        -DCMAKE_FIND_ROOT_PATH_MODE_PROGRAM:STRING=BOTH \
+        ../source
+}
+
+refresh()
+{
+  cd ../default
+  rm .build .host_install .target_install .postconfigure
+  cd -
+  cd integration && git pull && cd - &&
+  cd source && git pull && cd - &&
+  for r in duneplatform missionplanner perception vehicleplanner; do
+            cd "source/src/Modules/$r" && git pull && cd -
+        done
+}
+
+build()
+{
+    $cmd_make -C build
+}
+
+host_install()
+{
+    $cmd_make -C build install
+}
+
+#target_install()
+#{
+#    rm -rf "$cfg_dir_rootfs/usr/necsave" &&
+#        $cmd_cp -r "$cfg_dir_toolchain_sysroot/usr/necsave" "$cfg_dir_rootfs/usr" &&
+#        ln -fs /opt/lsts/necsave/log "$cfg_dir_rootfs/usr/necsave/log" &&
+#    $cmd_cp -r "integration/REP16"/* "$cfg_dir_rootfs/usr/necsave"
+#
+#}

rules/netcat/default.bash

@@ -1,52 +0,0 @@
-version=\
-(
-    "110"
-)
-
-url=\
-(
-    "https://kent.dl.sourceforge.net/project/nc$version/unix%20netcat%201.10%20by%20_Hobbit_/nc$version.tgz"
-)
-
-md5=\
-(
-    "402632f2fe01c169ff19a0ad6e9d608c"
-)
-
-post_unpack()
-{
-  cd "../netcat-$version"
-  mv ../data .
-  mv ../generic.h .
-  mv ../Makefile .
-  mv ../netcat.blurb .
-  mv ../netcat.c .
-  mv ../README .
-  mv ../Changelog .
-  mv ../scripts .
-  mv ../stupidh .
-
-  patches=$(ls "$pkg_dir"/patches/*.patch)
-  if [ -n "$patches" ]; then
-      cat $patches | patch -p1
-  fi
-}
-
-build()
-{
-  make nc CC="$cmd_target_cc"
-}
-
-host_install()
-{
-  $cmd_cp nc "${cfg_dir_toolchain_sysroot}/usr/bin/"
-  $cmd_mkdir "${cfg_dir_toolchain_sysroot}/usr/share/bin/"
-  $cmd_cp scripts/* "${cfg_dir_toolchain_sysroot}/usr/share/bin/"
-}
-
-target_install()
-{
-  $cmd_target_strip nc -o "$cfg_dir_rootfs/usr/bin/nc"
-  $cmd_mkdir ${cfg_dir_rootfs}/usr/share/bin/
-  $cmd_cp scripts/* "${cfg_dir_rootfs}/usr/share/bin/"
-}

rules/netcat/patches/res_init.patch

@@ -1,11 +0,0 @@
---- a/netcat.c	2017-05-25 14:39:05.517314469 +0200
-+++ b/netcat_patch.c	2017-05-25 14:39:00.549218618 +0200
-@@ -1316,7 +1316,7 @@
-
- #ifdef HAVE_BIND
- /* can *you* say "cc -yaddayadda netcat.c -lresolv -l44bsd" on SunLOSs? */
--  res_init();
-+//  res_init();
- #endif
- /* I was in this barbershop quartet in Skokie IL ... */
- /* round up the usual suspects, i.e. malloc up all the stuff we need */

rules/opencv/default.bash

@@ -1,6 +1,6 @@
 version=\
 (
-    "2.4.13"
+    "2.4.11"
 )
 
 url=\
@@ -10,27 +10,20 @@ url=\
 
 md5=\
 (
-    '886b0c511209b2f3129649928135967c'
+    '32f498451bff1817a60e1aabc2939575'
 )
 
 requires=\
 (
-    'ffmpeg/default'
     'cmake/host'
+    'ffmpeg/default'
 )
 
 maintainer=\
 (
     'Renato Caldas <rmsc@fe.up.pt>'
-    'Pedro Gonçalves <pedro@fe.up.pt>'
 )
 
-post_unpack()
-{
-    wget "http://lsts.pt/glued/tbb43_20141204oss_src.tgz"
-    mv tbb43_20141204oss_src.tgz "3rdparty/tbb/"
-}
-
 configure()
 {
     LINKER_ADDED_FLAGS="-Wl,-rpath,${cfg_dir_rootfs}/usr/lib"
@@ -38,28 +31,26 @@ configure()
     mkdir -p ../build
     cd ../build
     ${cfg_dir_toolchain}/usr/local/bin/cmake \
-    -DCMAKE_SYSTEM_NAME="Linux" \
-    -DCMAKE_SYSTEM_PROCESSOR="$cfg_architecture" \
-    -DCMAKE_BUILD_TYPE=Release \
-    -DCMAKE_FIND_ROOT_PATH="${cfg_dir_toolchain_sysroot}/usr ${cfg_dir_rootfs}/usr" \
-    -DCMAKE_FIND_ROOT_PATH_MODE_INCLUDE=ONLY \
-    -DCMAKE_FIND_ROOT_PATH_MODE_LIBRARY=ONLY \
-    -DCMAKE_C_COMPILER="${cmd_target_cc}" \
-    -DCMAKE_CXX_COMPILER="${cmd_target_cxx}" \
-    -DCMAKE_C_FLAGS="${cfg_target_gcc_flags}" \
-    -DCMAKE_SHARED_LINKER_FLAGS="${LINKER_ADDED_FLAGS} ${CMAKE_SHARED_LINKER_FLAGS}" \
-    -DCMAKE_MODULE_LINKER_FLAGS="${LINKER_ADDED_FLAGS} ${CMAKE_MODULE_LINKER_FLAGS}" \
-    -DCMAKE_EXE_LINKER_FLAGS="${LINKER_ADDED_FLAGS} ${CMAKE_EXE_LINKER_FLAGS}" \
-    -DCMAKE_INSTALL_PREFIX="${cfg_dir_toolchain_sysroot}/usr" \
-    -DBUILD_DOCS=OFF \
-    -DBUILD_EXAMPLES=OFF \
-    -DBUILD_PERF_TESTS=OFF \
-    -DBUILD_SHARED_LIBS=ON \
-    -DBUILD_TESTS=OFF \
-    -DBUILD_WITH_DEBUG_INFO=OFF \
-    -DBUILD_TBB=ON \
-    -DWITH_TBB=ON \
-    ../opencv-$version/
+        -DCMAKE_SYSTEM_NAME="Linux" \
+        -DCMAKE_SYSTEM_PROCESSOR="$cfg_architecture" \
+	-DCMAKE_BUILD_TYPE=Release \
+        -DCMAKE_FIND_ROOT_PATH="${cfg_dir_toolchain_sysroot}/usr ${cfg_dir_rootfs}/usr" \
+        -DCMAKE_FIND_ROOT_PATH_MODE_INCLUDE=ONLY \
+	-DCMAKE_FIND_ROOT_PATH_MODE_LIBRARY=ONLY \
+	-DCMAKE_C_COMPILER="${cmd_target_cc}" \
+	-DCMAKE_CXX_COMPILER="${cmd_target_cxx}" \
+	-DCMAKE_C_FLAGS="${cfg_target_gcc_flags}" \
+	-DCMAKE_SHARED_LINKER_FLAGS="${LINKER_ADDED_FLAGS} ${CMAKE_SHARED_LINKER_FLAGS}" \
+	-DCMAKE_MODULE_LINKER_FLAGS="${LINKER_ADDED_FLAGS} ${CMAKE_MODULE_LINKER_FLAGS}" \
+	-DCMAKE_EXE_LINKER_FLAGS="${LINKER_ADDED_FLAGS} ${CMAKE_EXE_LINKER_FLAGS}" \
+	-DCMAKE_INSTALL_PREFIX="${cfg_dir_toolchain_sysroot}/usr" \
+	-DBUILD_DOCS=OFF \
+	-DBUILD_EXAMPLES=OFF \
+	-DBUILD_PERF_TESTS=OFF \
+	-DBUILD_SHARED_LIBS=ON \
+	-DBUILD_TESTS=OFF \
+	-DBUILD_WITH_DEBUG_INFO=OFF \
+	../opencv-$version/
 }
 
 build()
@@ -72,11 +63,6 @@ host_install()
 {
     cd  ${pkg_build_dir}/../build &&
     $cmd_make install
-
-    # make available for cross compilation
-    for f in "$cfg_dir_toolchain_sysroot/usr/lib/"libopencv*so*; do
-       ln -s -f "$f" "$cfg_dir_toolchain/lib"
-    done
 }
 
 target_install()
@@ -89,7 +75,4 @@ target_install()
             $cmd_target_strip -v "$f" -o "$cfg_dir_rootfs/usr/lib/$(basename "$f")"
         fi
     done
-
-    $cmd_cp -r "${pkg_build_dir}/../build/lib/"libtbb.so "$cfg_dir_rootfs/usr/lib/"
-    $cmd_cp -r "${pkg_build_dir}/../build/lib/"libtbb.so "$cfg_dir_toolchain_sysroot/usr/lib/"
 }

rules/openssh/default.bash

@@ -30,7 +30,6 @@ configure()
         --target="$cfg_target_canonical" \
         --host="$cfg_target_canonical" \
         --build="$cfg_host_canonical" \
-        --with-privsep-path=$cfg_dir_rootfs/var/empty \
         --disable-strip
         
 }

rules/perf/default.bash

@@ -1,46 +0,0 @@
-version=\
-(
-    "3.19"
-)
-
-url=\
-(
-       "https://www.kernel.org/pub/linux/kernel/v3.x/linux-$version.tar.xz"
-)
-
-requires=\
-(
-    'flex/host'
-    'bison/host'
-    'zlib/default'
-)
-
-# v3.19
-md5=\
-(
-       'd3fc8316d4d4d04b65cbc2d70799e763'
-)
-
-#3.14.63
-# md5=('6cf8a6b23849f47f511e0e46cfdb6392')
-
-build()
-{
-    
-    cd ../linux-$version/
-    $cmd_make \
-	CROSS_COMPILE="$cfg_target_canonical-" \
-	ARCH="$cfg_target_linux" \
-	INSTALL_MOD_PATH="$cfg_dir_rootfs/usr" \
-	KBUILD_VERBOSE=1 \
-	DEPMOD="$cfg_dir_toolchain/sbin/depmod" \
-	NO_LIBELF=1 \
-	LDFLAGS=-static \
-	-C "./tools/perf/"
-}
-
-target_install()
-{
-    $cmd_cp ../linux-$version/tools/perf/perf \
-	    $cfg_dir_rootfs/usr/bin/
-}

rules/pointgrey/default.bash

@@ -1,46 +0,0 @@
-version=\
-(
-    "2.11.3.121"
-)
-
-url=\
-(
-    "http://lsts.pt/glued/flycapture.$version.armhf.tar.gz"
-)
-
-md5=\
-(
-    "788861351143e3279cf4522e1055e739"
-)
-
-post_unpack()
-{
-    $cmd_cp -r "../flycapture.2.11.3.121_armhf/"* "../pointgrey-$version/"
-    rm -r ../flycapture.2.11.3.121_armhf/
-}
-
-requires=\
-(
-    'libusb/default'
-    'libraw1394/default'
-    'libdc1394/default'
-)
-
-maintainer=\
-(
-    'Pedro Gonçalves <pedro@lsts.pt>'
-)
-
-host_install()
-{
-    $cmd_cp -r "lib/"*    "$cfg_dir_toolchain_sysroot/usr/lib/"
-    $cmd_cp -r "include/"* "$cfg_dir_toolchain_sysroot/usr/include/"
-}
-
-target_install()
-{
-    $cmd_mkdir "$cfg_dir_rootfs/usr/include/"
-    $cmd_cp -r "lib/"* "$cfg_dir_rootfs/usr/lib/"
-    $cmd_cp -r "include/"* "$cfg_dir_rootfs/usr/include/"
-}
-

rules/raspicam/default.bash

@@ -1,65 +0,0 @@
-version=\
-(
-    "1.0.0"
-)
-
-url=\
-(
-    "http://lsts.pt/glued/raspicam-$version.zip"
-)
-
-md5=\
-(
-  "169e62fd17d41455a42711a2f9c54fd1"
-)
-
-requires=\
-(
-    'cmake/host'
-)
-
-maintainer=\
-(
-    'Pedro Gonçalves <pedro@lsts.pt>'
-)
-
-requires=\
-(
-    'uv4l/default'
-    'cmake/host'
-)
-
-configure()
-{
-    LINKER_ADDED_FLAGS="-Wl,-rpath,${cfg_dir_rootfs}/usr/lib"
-
-    ${cfg_dir_toolchain}/usr/local/bin/cmake \
-        -DCMAKE_SYSTEM_NAME="Linux" \
-        -DCMAKE_SYSTEM_VERSION="1" \
-        -DCMAKE_FIND_ROOT_PATH="${cfg_dir_toolchain_sysroot}/usr ${cfg_dir_rootfs}/usr" \
-        -DCMAKE_FIND_ROOT_PATH_MODE_INCLUDE=ONLY \
-        -DCMAKE_FIND_ROOT_PATH_MODE_LIBRARY=ONLY \
-        -DCMAKE_C_COMPILER="${cmd_target_cc}" \
-        -DCMAKE_CXX_COMPILER="${cmd_target_cxx}" \
-        -DCMAKE_C_FLAGS="${cfg_target_gcc_flags}" \
-	.
-}
-
-build()
-{
-    $cmd_make VERBOSE=1
-}
-
-host_install()
-{
-    cd build/
-    $cmd_cp -r "lib/"* "$cfg_dir_toolchain_sysroot/usr/lib/"
-    $cmd_cp -r "inc/"* "$cfg_dir_toolchain_sysroot/usr/include/"
-}
-
-target_install()
-{
-    cd build/
-    $cmd_cp -r "lib/"* "$cfg_dir_rootfs/usr/lib/"
-    $cmd_cp -r "bin/"* "$cfg_dir_rootfs/usr/bin/"
-}

rules/rlwrap/default.bash

@@ -1,44 +0,0 @@
-version=\
-(
-  "0.43"
-)
-
-url=\
-(
-  "https://github.com/hanslub42/rlwrap/releases/download/v$version/rlwrap-$version.tar.gz"
-)
-
-md5=\
-(
-  "b993e83d3a292464de70719b32f83a34"
-)
-
-requires=(
-  "readline/default"
-)
-
-configure()
-{
-  ./configure \
-    --prefix="${cfg_dir_toolchain_sysroot}/usr" \
-    --target="$cfg_target_canonical" \
-    --host="$cfg_target_canonical" \
-    --build="$cfg_host_canonical"
-}
-
-build()
-{
-  $cmd_make
-}
-
-host_install()
-{
-  $cmd_make install
-}
-
-target_install()
-{
-  $cmd_cp  $cfg_dir_toolchain_sysroot/usr/share/rlwrap $cfg_dir_rootfs/usr/share/
-  $cmd_cp  $cfg_dir_toolchain_sysroot/usr/bin/rlwrap $cfg_dir_rootfs/usr/bin/
-}
-

rules/rpi-boot-firmware/default.bash

@@ -1,26 +1,31 @@
 version=\
 (
-    '2019-07-29'
+    '2015-06-03'
 )
 
 url=\
 (
-    "http://www.lsts.pt/glued/rpi-boot-firmware-$version.zip"
+    "https://github.com/rasmartins/rpi-boot-firmware/archive/rpi-boot-firmware-$version.tar.gz"
 )
 
 maintainer=\
 (
-    'Pedro Gonçalves <pedro@lsts.pt>'
+    'Ricardo Martins <rasm@fe.up.pt>'
 )
 
 md5=\
 (
-    '5b35887b1026fafe8174f473679d175a'
+    'a80ee36b66cccda4e9ccb7eb26bd6bb8'
 )
 
 target_install()
 {
-    $cmd_mkdir "$cfg_dir_rootfs/boot"
-    $cmd_cp "../$pkg-$version/"* "$cfg_dir_rootfs/boot/"
+    $cmd_mkdir \
+        "$cfg_dir_rootfs/boot" &&
+
+    for f in bootcode.bin fixup.dat start.elf; do
+        $cmd_cp -r "../$pkg-$pkg-$version/$f" "$cfg_dir_rootfs/boot"
+    done &&
+
     tar -C "$pkg_dir/fs" -c -f - . | tar -C "$cfg_dir_rootfs" -x -v -f -
 }

rules/rpi-boot-firmware/fs/boot/config.txt

@@ -0,0 +1 @@
+arm_freq=1000

rules/rt-tests/default.bash

@@ -1,32 +0,0 @@
-version=\
-(
-    '0.96'
-)
-
-url=\
-(
-    "https://www.kernel.org/pub/linux/utils/rt-tests/rt-tests-$version.tar.gz"
-)
-
-md5=\
-(
-    '590b2340f66993a978d9806a734d5ea8'
-)
-
-maintainer=\
-(
-    'Kristian Klausen <kristian.klausen@itk.ntnu.no>'
-)
-
-build()
-{
-    $cmd_make \
-	CC=$cmd_target_cc cyclictest \
-	CFLAGS="$cfg_target_gcc_flags" 
-}
-
-target_install()
-{
-    cp -a cyclictest "$cfg_dir_rootfs/usr/bin/" &&
-    $cmd_target_strip "$cfg_dir_rootfs/usr/bin/cyclictest"
-}

rules/rtklib/default.bash

@@ -34,7 +34,7 @@ build()
     cd app/str2str/gcc
     $cmd_make \
 	CC=$cmd_target_cc \
-	CTARGET="${cfg_target_gcc_flags} -DSVR_REUSEADDR" \
+	CTARGET="$cfg_target_gcc_flags" \
 	BINDIR="${cfg_dir_toolchain_sysroot}/usr/bin" 
 	
     cd ../../rtkrcv/gcc

rules/screen/default.bash

@@ -1,59 +0,0 @@
-version=\
-(
-  "4.5.0"
-)
-
-url=\
-(
-  "http://ftp.gnu.org/gnu/screen/screen-$version.tar.gz"
-)
-
-md5=\
-(
-  "a32105a91359afab1a4349209a028e31"
-)
-
-requires=\
-(
-  "ncurses/default"
-)
-
-post_unpack()
-{
-  patches=$(ls "$pkg_dir"/patches/*.patch)
-  if [ -n "$patches" ]; then
-      cat $patches | patch -p1
-  fi
-
-  autoconf
-  aclocal
-}
-
-configure()
-{
-  ./configure \
-        --target="$cfg_target_canonical" \
-        --host="$cfg_target_canonical" \
-        --build="$cfg_host_canonical" \
-        --prefix="$cfg_dir_toolchain_sysroot/usr" \
-        --enable-colors256
-}
-
-build()
-{
-  $cmd_make
-}
-
-host_install()
-{
-  $cmd_make install
-}
-
-target_install()
-{
-  $cmd_cp  $cfg_dir_toolchain_sysroot/usr/share/screen $cfg_dir_rootfs/usr/share/
-  $cmd_cp  $cfg_dir_toolchain_sysroot/usr/bin/screen-$version $cfg_dir_rootfs/usr/bin/screen
-  $cmd_cp  etc/screenrc $cfg_dir_rootfs/etc/screenrc
-}
-
-

rules/screen/patches/0001-compiler-sanity-checks.patch

@@ -1,62 +0,0 @@
-From: Maarten ter Huurne <maarten@treewalker.org>
-Date: Sat, 13 Sep 2014 10:27:27 +0200
-Subject: Removed redundant compiler sanity checks
-
-AC_PROG_CC already performs sanity checks. And unlike the removed
-checks, it does so in a way that supports cross compilation.
-
-Signed-off-by: Maarten ter Huurne <maarten@treewalker.org>
-[Ricardo: rebase on top of 4.3.1]
-Signed-off-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
----
- configure.ac | 27 ---------------------------
- 1 file changed, 27 deletions(-)
-
-diff --git a/configure.ac b/configure.ac
-index ffe2e37..27690a6 100644
---- a/configure.ac
-+++ b/configure.ac
-@@ -48,31 +48,6 @@ AC_PROG_GCC_TRADITIONAL
- AC_ISC_POSIX
- AC_USE_SYSTEM_EXTENSIONS
- 
--AC_TRY_RUN(main(){exit(0);},,[
--if test $CC != cc ; then
--AC_NOTE(Your $CC failed - restarting with CC=cc)
--AC_NOTE()
--CC=cc
--export CC
--exec $0 $configure_args
--fi
--])
--
--AC_TRY_RUN(main(){exit(0);},,
--exec 5>&2
--eval $ac_link
--AC_NOTE(CC=$CC; CFLAGS=$CFLAGS; LIBS=$LIBS;)
--AC_NOTE($ac_compile)
--AC_MSG_ERROR(Can't run the compiler - sorry))
--
--AC_TRY_RUN([
--main()
--{
--  int __something_strange_();
--  __something_strange_(0);
--}
--],AC_MSG_ERROR(Your compiler does not set the exit status - sorry))
--
- AC_PROG_AWK
- 
- AC_PROG_INSTALL
-@@ -1300,8 +1275,6 @@ fi
- dnl Ptx bug workaround -- insert -lc after -ltermcap
- test -n "$seqptx" && LIBS="-ltermcap -lc -lsocket -linet -lnsl -lsec -lseq"
- 
--AC_TRY_RUN(main(){exit(0);},,AC_MSG_ERROR(Can't run the compiler - internal error. Sorry.))
--
- ETCSCREENRC=
- AC_MSG_CHECKING(for the global screenrc file)
- AC_ARG_WITH(sys-screenrc, [  --with-sys-screenrc=path to the global screenrc file], [ ETCSCREENRC="${withval}" ])
--- 
-1.8.4.5
-

rules/screen/patches/0002-no-memcpy-fallback.patch

@@ -1,124 +0,0 @@
-From: Maarten ter Huurne <maarten@treewalker.org>
-Date: Sat, 13 Sep 2014 11:37:59 +0200
-Subject: Do not use memcpy as an alternative for bcopy/memmove
-
-The configure script runs a small test program to check whether
-memcpy can handle overlapping memory areas. However, it is not valid
-to conclude that if a single case of overlapping memory is handled
-correctly, all cases will be handled correctly.
-
-Since screen already has its own bcopy implementation as a fallback
-for the case that bcopy and memmove are unusable, removing the memcpy
-option should not break any systems.
-
-Signed-off-by: Maarten ter Huurne <maarten@treewalker.org>
-[Ricardo: rebase on top of 4.3.1]
-Signed-off-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
----
- acconfig.h   |  3 +--
- configure.ac | 18 +-----------------
- os.h         |  8 ++------
- osdef.h.in   | 10 +---------
- 4 files changed, 5 insertions(+), 34 deletions(-)
-
-diff --git a/acconfig.h b/acconfig.h
-index 2e46985..9b0b9d4 100644
---- a/acconfig.h
-+++ b/acconfig.h
-@@ -476,7 +476,7 @@
- #undef GETTTYENT
- 
- /*
-- * Define USEBCOPY if the bcopy/memcpy from your system's C library
-+ * Define USEBCOPY if the bcopy from your system's C library
-  * supports the overlapping of source and destination blocks.  When
-  * undefined, screen uses its own (probably slower) version of bcopy().
-  * 
-@@ -487,7 +487,6 @@
-  * Their memove fails the test in the configure script. Sigh. (Juergen)
-  */
- #undef USEBCOPY
--#undef USEMEMCPY
- #undef USEMEMMOVE
- 
- /*
-diff --git a/configure.ac b/configure.ac
-index 27690a6..b8e3bec 100644
---- a/configure.ac
-+++ b/configure.ac
-@@ -1145,7 +1145,7 @@ AC_TRY_LINK(,[getttyent();], AC_DEFINE(GETTTYENT))
- AC_CHECKING(fdwalk)
- AC_TRY_LINK([#include <stdlib.h>], [fdwalk(NULL, NULL);],AC_DEFINE(HAVE_FDWALK))
- 
--AC_CHECKING(whether memcpy/memmove/bcopy handles overlapping arguments)
-+AC_CHECKING(whether memmove/bcopy handles overlapping arguments)
- AC_TRY_RUN([
- main() {
-   char buf[10];
-@@ -1175,22 +1175,6 @@ main() {
-   exit(0); /* libc version works properly.  */
- }], AC_DEFINE(USEMEMMOVE))
- 
--
--AC_TRY_RUN([
--#define bcopy(s,d,l) memcpy(d,s,l)
--main() {
--  char buf[10];
--  strcpy(buf, "abcdefghi");
--  bcopy(buf, buf + 2, 3);
--  if (strncmp(buf, "ababcf", 6))
--    exit(1);
--  strcpy(buf, "abcdefghi");
--  bcopy(buf + 2, buf, 3);
--  if (strncmp(buf, "cdedef", 6))
--    exit(1);
--  exit(0); /* libc version works properly.  */
--}], AC_DEFINE(USEMEMCPY))
--
- AC_SYS_LONG_FILE_NAMES
- 
- AC_MSG_CHECKING(for vsprintf)
-diff --git a/os.h b/os.h
-index e827ac9..0b41fb9 100644
---- a/os.h
-+++ b/os.h
-@@ -142,12 +142,8 @@ extern int errno;
- # ifdef USEMEMMOVE
- #  define bcopy(s,d,len) memmove(d,s,len)
- # else
--#  ifdef USEMEMCPY
--#   define bcopy(s,d,len) memcpy(d,s,len)
--#  else
--#   define NEED_OWN_BCOPY
--#   define bcopy xbcopy
--#  endif
-+#  define NEED_OWN_BCOPY
-+#  define bcopy xbcopy
- # endif
- #endif
- 
-diff --git a/osdef.h.in b/osdef.h.in
-index 8687b60..e4057a0 100644
---- a/osdef.h.in
-+++ b/osdef.h.in
-@@ -58,16 +58,8 @@ extern int   bcmp __P((char *, char *, int));
- extern int   killpg __P((int, int));
- #endif
- 
--#ifndef USEBCOPY
--# ifdef USEMEMCPY
--extern void  memcpy __P((char *, char *, int));
--# else
--#  ifdef USEMEMMOVE
-+#if defined(USEMEMMOVE) && !defined(USEBCOPY)
- extern void  memmove __P((char *, char *, int));
--#  else
--extern void  bcopy __P((char *, char *, int));
--#  endif
--# endif
- #else
- extern void  bcopy __P((char *, char *, int));
- #endif
--- 
-1.8.4.5
-

rules/screen/patches/0003-cross-compilation-AC_TRY_RUN.patch

@@ -1,125 +0,0 @@
-From: Maarten ter Huurne <maarten@treewalker.org>
-Date: Sat, 13 Sep 2014 12:04:41 +0200
-Subject: Provide cross compilation alternatives for all AC_TRY_RUN uses
-
-Signed-off-by: Maarten ter Huurne <maarten@treewalker.org>
-[Ricardo: rebase on top of 4.3.1]
-Signed-off-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
----
- configure.ac | 30 +++++++++++++++++++-----------
- 1 file changed, 19 insertions(+), 11 deletions(-)
-
-diff --git a/configure.ac b/configure.ac
-index b8e3bec..c4b7cd4 100644
---- a/configure.ac
-+++ b/configure.ac
-@@ -348,7 +348,8 @@ main()
-   exit(0);
- }
- ], AC_NOTE(- your fifos are usable) fifo=1,
--AC_NOTE(- your fifos are not usable))
-+AC_NOTE(- your fifos are not usable),
-+AC_NOTE(- skipping check because we are cross compiling; assuming fifos are usable) fifo=1)
- rm -f /tmp/conftest*
- 
- if test -n "$fifo"; then
-@@ -396,7 +397,8 @@ main()
-   exit(0);
- }
- ], AC_NOTE(- your implementation is ok), 
--AC_NOTE(- you have a broken implementation) AC_DEFINE(BROKEN_PIPE) fifobr=1)
-+AC_NOTE(- you have a broken implementation) AC_DEFINE(BROKEN_PIPE) fifobr=1,
-+AC_NOTE(- skipping check because we are cross compiling; assuming fifo implementation is ok))
- rm -f /tmp/conftest*
- fi
- 
-@@ -458,7 +460,8 @@ main()
-   exit(0);
- }
- ], AC_NOTE(- your sockets are usable) sock=1,
--AC_NOTE(- your sockets are not usable))
-+AC_NOTE(- your sockets are not usable),
-+AC_NOTE(- skipping check because we are cross compiling; assuming sockets are usable) sock=1)
- rm -f /tmp/conftest*
- 
- if test -n "$sock"; then
-@@ -497,7 +500,8 @@ main()
- }
- ],AC_NOTE(- you are normal),
- AC_NOTE(- unix domain sockets are not kept in the filesystem)
--AC_DEFINE(SOCK_NOT_IN_FS) socknofs=1)
-+AC_DEFINE(SOCK_NOT_IN_FS) socknofs=1,
-+AC_NOTE(- skipping check because we are cross compiling; assuming sockets are normal))
- rm -f /tmp/conftest*
- fi
- 
-@@ -624,7 +628,8 @@ main()
-   exit(0);
- }
- ],AC_NOTE(- select is ok),
--AC_NOTE(- select can't count) AC_DEFINE(SELECT_BROKEN))
-+AC_NOTE(- select can't count) AC_DEFINE(SELECT_BROKEN),
-+AC_NOTE(- skipping check because we are cross compiling; assuming select is ok))
- 
- dnl
- dnl    ****  termcap or terminfo  ****
-@@ -666,7 +671,8 @@ main()
- {
-  exit(strcmp(tgoto("%p1%d", 0, 1), "1") ? 0 : 1);
- }], AC_NOTE(- you use the termcap database),
--AC_NOTE(- you use the terminfo database) AC_DEFINE(TERMINFO))
-+AC_NOTE(- you use the terminfo database) AC_DEFINE(TERMINFO),
-+AC_NOTE(- skipping check because we are cross compiling; assuming terminfo database is used) AC_DEFINE(TERMINFO))
- AC_CHECKING(ospeed)
- AC_TRY_LINK(extern short ospeed;,ospeed=5;,,AC_DEFINE(NEED_OSPEED))
- 
-@@ -801,7 +807,8 @@ main()
-     else
-       AC_NOTE(- can't determine - assume ptys are world accessable)
-     fi
--  ]
-+  ],
-+  AC_NOTE(- skipping check because we are cross compiling; assuming ptys are world accessable)
- )
- rm -f conftest_grp
- fi
-@@ -885,7 +892,7 @@ AC_EGREP_CPP(yes,
- #endif
- ], load=1)
- fi
--if test -z "$load" ; then
-+if test -z "$load" && test "$cross_compiling" = no ; then
- AC_CHECKING(for kernelfile)
- for core in /unix /vmunix /dynix /hp-ux /xelos /dev/ksyms /kernel/unix /kernel/genunix /unicos /mach /netbsd /386bsd /dgux /bsd /stand/vmunix; do
-   if test -f $core || test -c $core; then
-@@ -1078,7 +1085,7 @@ main()
- #endif
-   exit(0);
- }
--],,AC_DEFINE(SYSVSIGS))
-+],,AC_DEFINE(SYSVSIGS),:)
- 
- fi
- 
-@@ -1158,7 +1165,7 @@ main() {
-   if (strncmp(buf, "cdedef", 6))
-     exit(1);
-   exit(0); /* libc version works properly.  */
--}], AC_DEFINE(USEBCOPY))
-+}], AC_DEFINE(USEBCOPY),,:)
- 
- AC_TRY_RUN([
- #define bcopy(s,d,l) memmove(d,s,l)
-@@ -1173,7 +1180,8 @@ main() {
-   if (strncmp(buf, "cdedef", 6))
-     exit(1);
-   exit(0); /* libc version works properly.  */
--}], AC_DEFINE(USEMEMMOVE))
-+}], AC_DEFINE(USEMEMMOVE),,
-+  AC_NOTE(- skipping check because we are cross compiling; use memmove) AC_DEFINE(USEMEMMOVE))
- 
- AC_SYS_LONG_FILE_NAMES
- 
--- 
-1.8.4.5
-

rules/screen/patches/0004-cross-compilation-ignore-host-fs.patch

@@ -1,132 +0,0 @@
-From: Maarten ter Huurne <maarten@treewalker.org>
-Date: Sun, 14 Sep 2014 07:10:59 +0200
-Subject: When cross-compiling, skip checks that look in the host file system
-
-Signed-off-by: Maarten ter Huurne <maarten@treewalker.org>
-[Ricardo: rebase on top of 4.3.1]
-Signed-off-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
----
- configure.ac | 23 +++++++++++++++++++----
- 1 file changed, 19 insertions(+), 4 deletions(-)
-
-diff --git a/configure.ac b/configure.ac
-index c4b7cd4..9cf7cee 100644
---- a/configure.ac
-+++ b/configure.ac
-@@ -85,7 +85,7 @@ AC_ARG_ENABLE(socket-dir,
- dnl
- dnl    ****  special unix variants  ****
- dnl
--if test -n "$ISC"; then
-+if test "$cross_compiling" = no && test -n "$ISC" ; then
-   AC_DEFINE(ISC) LIBS="$LIBS -linet"
- fi
- 
-@@ -96,10 +96,11 @@ dnl AC_DEFINE(OSF1)	# this disables MIPS again....
- dnl fi
- dnl fi
- 
--if test -f /sysV68 ; then
-+if test "$cross_compiling" = no && test -f /sysV68 ; then
- AC_DEFINE(sysV68)
- fi
- 
-+if test "$cross_compiling" = no ; then
- AC_CHECKING(for MIPS)
- if test -f /lib/libmld.a || test -f /usr/lib/libmld.a || test -f /usr/lib/cmplrs/cc/libmld.a; then
- oldlibs="$LIBS"
-@@ -123,6 +124,7 @@ AC_DEFINE(USE_WAIT2) LIBS="$LIBS -lbsd" ; CC="$CC -I/usr/include/bsd"
- ))
- fi
- fi
-+fi
- 
- 
- AC_CHECKING(for Ultrix)
-@@ -132,7 +134,7 @@ AC_EGREP_CPP(yes,
- #endif
- ], ULTRIX=1)
- 
--if test -f /usr/lib/libpyr.a ; then
-+if test "$cross_compiling" = no && test -f /usr/lib/libpyr.a ; then
- oldlibs="$LIBS"
- LIBS="$LIBS -lpyr"
- AC_CHECKING(Pyramid OSX)
-@@ -679,17 +681,21 @@ AC_TRY_LINK(extern short ospeed;,ospeed=5;,,AC_DEFINE(NEED_OSPEED))
- dnl
- dnl    ****  PTY specific things  ****
- dnl
-+if test "$cross_compiling" = no ; then
- AC_CHECKING(for /dev/ptc)
- if test -r /dev/ptc; then
- AC_DEFINE(HAVE_DEV_PTC)
- fi
-+fi
- 
-+if test "$cross_compiling" = no ; then
- AC_CHECKING(for SVR4 ptys)
- sysvr4ptys=
- if test -c /dev/ptmx ; then
- AC_TRY_LINK([],[ptsname(0);grantpt(0);unlockpt(0);],[AC_DEFINE(HAVE_SVR4_PTYS)
- sysvr4ptys=1])
- fi
-+fi
- 
- AC_CHECK_FUNCS(getpt)
- 
-@@ -699,6 +705,7 @@ AC_CHECK_FUNCS(openpty,,
- [AC_CHECK_LIB(util,openpty, [AC_DEFINE(HAVE_OPENPTY)] [LIBS="$LIBS -lutil"])])
- fi
- 
-+if test "$cross_compiling" = no ; then
- AC_CHECKING(for ptyranges)
- if test -d /dev/ptym ; then
- pdir='/dev/ptym'
-@@ -722,6 +729,7 @@ p1=`echo $ptys | tr ' ' '\012' | sed -e 's/^.*\(.\)$/\1/g'  | sort -u | tr -d '\
- AC_DEFINE_UNQUOTED(PTYRANGE0,"$p0")
- AC_DEFINE_UNQUOTED(PTYRANGE1,"$p1")
- fi
-+fi
- 
- dnl    ****  pty mode/group handling ****
- dnl
-@@ -869,14 +877,16 @@ fi
- dnl
- dnl    ****  loadav  ****
- dnl
-+if test "$cross_compiling" = no ; then
- AC_CHECKING(for libutil(s))
- test -f /usr/lib/libutils.a && LIBS="$LIBS -lutils"
- test -f /usr/lib/libutil.a && LIBS="$LIBS -lutil"
-+fi
- 
- AC_CHECKING(getloadavg)
- AC_TRY_LINK(,[getloadavg((double *)0, 0);],
- AC_DEFINE(LOADAV_GETLOADAVG) load=1,
--if test -f /usr/lib/libkvm.a ; then
-+if test "$cross_compiling" = no && test -f /usr/lib/libkvm.a ; then
- olibs="$LIBS"
- LIBS="$LIBS -lkvm"
- AC_CHECKING(getloadavg with -lkvm)
-@@ -1094,13 +1104,18 @@ dnl    ****  libraries  ****
- dnl
- 
- AC_CHECKING(for crypt and sec libraries)
-+if test "$cross_compiling" = no ; then
- test -f /lib/libcrypt_d.a || test -f /usr/lib/libcrypt_d.a && LIBS="$LIBS -lcrypt_d"
-+fi
- oldlibs="$LIBS"
- LIBS="$LIBS -lcrypt"
- AC_CHECKING(crypt)
- AC_TRY_LINK(,,,LIBS="$oldlibs")
-+if test "$cross_compiling" = no ; then
- test -f /lib/libsec.a || test -f /usr/lib/libsec.a && LIBS="$LIBS -lsec"
- test -f /lib/libshadow.a || test -f /usr/lib/libshadow.a && LIBS="$LIBS -lshadow"
-+fi
-+
- oldlibs="$LIBS"
- LIBS="$LIBS -lsun"
- AC_CHECKING(IRIX sun library)
--- 
-1.8.4.5
-

rules/screen/patches/0005-avoid-identifying-as-SVR4.patch

@@ -1,54 +0,0 @@
-From: Maarten ter Huurne <maarten@treewalker.org>
-Date: Sun, 14 Sep 2014 11:16:58 +0200
-Subject: Avoid mis-identifying systems as SVR4
-
-My openSUSE 13.1 Linux system was detected as SVR4 because it had
-libelf installed. This leads to linking with libelf, even though no
-symbols from that library were actually used, and to a workaround for
-a buggy getlogin() being enabled.
-
-It is not documented which exact SVR4 system had the bug that the
-workaround was added for, so all I could do is make an educated guess
-at the #defines its compiler would be likely to set.
-
-Signed-off-by: Maarten ter Huurne <maarten@treewalker.org>
-[Ricardo: rebase on top of 4.3.1]
-Signed-off-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
----
- configure.ac | 14 ++++++++++++--
- 1 file changed, 12 insertions(+), 2 deletions(-)
-
-diff --git a/configure.ac b/configure.ac
-index 9cf7cee..e09e4cf 100644
---- a/configure.ac
-+++ b/configure.ac
-@@ -179,14 +179,24 @@ AC_EGREP_CPP(yes,
- #endif
- ], LIBS="$LIBS -lsocket -linet";seqptx=1)
- 
-+AC_CHECKING(SVR4)
-+AC_EGREP_CPP(yes,
-+[main () {
-+#if defined(SVR4) || defined(__SVR4)
-+  yes;
-+#endif
-+], AC_NOTE(- you have a SVR4 system) AC_DEFINE(SVR4) svr4=1)
-+if test -n "$svr4" ; then
- oldlibs="$LIBS"
- LIBS="$LIBS -lelf"
- AC_CHECKING(SVR4)
- AC_TRY_LINK([#include <utmpx.h>
- ],,
--[AC_CHECK_HEADER(dwarf.h, AC_DEFINE(SVR4) AC_DEFINE(BUGGYGETLOGIN),
--[AC_CHECK_HEADER(elf.h, AC_DEFINE(SVR4) AC_DEFINE(BUGGYGETLOGIN))])]
-+[AC_CHECK_HEADER(dwarf.h, AC_DEFINE(BUGGYGETLOGIN),
-+[AC_CHECK_HEADER(elf.h, AC_DEFINE(BUGGYGETLOGIN))])]
- ,LIBS="$oldlibs")
-+fi
-+
- AC_CHECK_HEADERS([stropts.h string.h strings.h])
- 
- AC_CHECKING(for Solaris 2.x)
--- 
-1.8.4.5
-

rules/screen/patches/0006-install-no-backup-binary.patch

@@ -1,39 +0,0 @@
-From: Maarten ter Huurne <maarten@treewalker.org>
-Date: Sun, 14 Sep 2014 23:58:34 +0200
-Subject: Do not create backup of old installed binary
-
-This is a rather unusual feature that packagers will not expect.
-
-Signed-off-by: Maarten ter Huurne <maarten@treewalker.org>
----
- Makefile.in | 4 ----
- 1 file changed, 4 deletions(-)
-
-diff --git a/Makefile.in b/Makefile.in
-index 187a69b..65549e9 100644
---- a/Makefile.in
-+++ b/Makefile.in
-@@ -83,12 +83,9 @@ screen: $(OFILES)
- 	    $(OPTIONS) $(CFLAGS) $<
- 
- install_bin: .version screen
--	-if [ -f $(DESTDIR)$(bindir)/$(SCREEN) ] && [ ! -f $(DESTDIR)$(bindir)/$(SCREEN).old ]; \
--		then mv $(DESTDIR)$(bindir)/$(SCREEN) $(DESTDIR)$(bindir)/$(SCREEN).old; fi
- 	$(INSTALL_PROGRAM) screen $(DESTDIR)$(bindir)/$(SCREEN)
- 	-chown root $(DESTDIR)$(bindir)/$(SCREEN) && chmod 4755 $(DESTDIR)$(bindir)/$(SCREEN)
- # This doesn't work if $(bindir)/screen is a symlink
--	-if [ -f $(DESTDIR)$(bindir)/screen ] && [ ! -f $(DESTDIR)$(bindir)/screen.old ]; then mv $(DESTDIR)$(bindir)/screen $(DESTDIR)$(bindir)/screen.old; fi
- 	rm -f $(DESTDIR)$(bindir)/screen
- 	(cd $(DESTDIR)$(bindir) && ln -f -s $(SCREEN) screen)
- 	cp $(srcdir)/utf8encodings/?? $(DESTDIR)$(SCREENENCODINGS)
-@@ -113,7 +110,6 @@ installdirs:
- uninstall: .version
- 	rm -f $(DESTDIR)$(bindir)/$(SCREEN)
- 	rm -f $(DESTDIR)$(bindir)/screen
--	-mv $(DESTDIR)$(bindir)/screen.old $(DESTDIR)$(bindir)/screen
- 	rm -f $(DESTDIR)$(ETCSCREENRC)
- 	cd doc; $(MAKE) uninstall
- 
--- 
-1.8.4.5
-

rules/screen/patches/0007-install-always-chmod.patch

@@ -1,29 +0,0 @@
-From: Maarten ter Huurne <maarten@treewalker.org>
-Date: Mon, 15 Sep 2014 00:03:05 +0200
-Subject: Change binary permission flags even if chown fails
-
-Typically when creating a package, the build is not run as root, so
-the chown will fail. But the chmod can still be done.
-
-Signed-off-by: Maarten ter Huurne <maarten@treewalker.org>
----
- Makefile.in | 3 ++-
- 1 file changed, 2 insertions(+), 1 deletion(-)
-
-diff --git a/Makefile.in b/Makefile.in
-index 65549e9..3c12fdb 100644
---- a/Makefile.in
-+++ b/Makefile.in
-@@ -84,7 +84,8 @@ screen: $(OFILES)
- 
- install_bin: .version screen
- 	$(INSTALL_PROGRAM) screen $(DESTDIR)$(bindir)/$(SCREEN)
--	-chown root $(DESTDIR)$(bindir)/$(SCREEN) && chmod 4755 $(DESTDIR)$(bindir)/$(SCREEN)
-+	-chown root $(DESTDIR)$(bindir)/$(SCREEN)
-+	-chmod 4755 $(DESTDIR)$(bindir)/$(SCREEN)
- # This doesn't work if $(bindir)/screen is a symlink
- 	rm -f $(DESTDIR)$(bindir)/screen
- 	(cd $(DESTDIR)$(bindir) && ln -f -s $(SCREEN) screen)
--- 
-1.8.4.5
-

rules/screen/patches/0008-install-nonversioned-binary.patch

@@ -1,31 +0,0 @@
-From: Maarten ter Huurne <maarten@treewalker.org>
-Date: Mon, 15 Sep 2014 00:06:20 +0200
-Subject: Support overriding SCREEN to get a non-versioned binary
-
-If a packager runs "make install SCREEN=screen", do not create
-"screen" as a symlink to itself.
-
-Signed-off-by: Maarten ter Huurne <maarten@treewalker.org>
----
- Makefile.in | 2 ++
- 1 file changed, 2 insertions(+)
-
-diff --git a/Makefile.in b/Makefile.in
-index 3c12fdb..860f351 100644
---- a/Makefile.in
-+++ b/Makefile.in
-@@ -86,9 +86,11 @@ install_bin: .version screen
- 	$(INSTALL_PROGRAM) screen $(DESTDIR)$(bindir)/$(SCREEN)
- 	-chown root $(DESTDIR)$(bindir)/$(SCREEN)
- 	-chmod 4755 $(DESTDIR)$(bindir)/$(SCREEN)
-+ifneq (${SCREEN},screen)
- # This doesn't work if $(bindir)/screen is a symlink
- 	rm -f $(DESTDIR)$(bindir)/screen
- 	(cd $(DESTDIR)$(bindir) && ln -f -s $(SCREEN) screen)
-+endif
- 	cp $(srcdir)/utf8encodings/?? $(DESTDIR)$(SCREENENCODINGS)
- 
- ###############################################################################
--- 
-1.8.4.5
-

rules/screen/patches/0009-install-dir-dependency.patch

@@ -1,43 +0,0 @@
-From: Maarten ter Huurne <maarten@treewalker.org>
-Date: Mon, 15 Sep 2014 02:27:09 +0200
-Subject: Ensure that installation dirs exist before copying files into them
-
-Since the "install_bin" target requires the installation directories
-to exist, it should depend on the "installdirs" target. The previous
-approach of having "install" depend on "installdirs" is not reliable.
-
-For example, in a parallel build, there was no guarantee that
-"installdirs" would be finished before "install_bin" runs. Also if
-the user requested only "install_bin" to be made, "installdirs" would
-be skipped altogether.
-
-Signed-off-by: Maarten ter Huurne <maarten@treewalker.org>
----
- Makefile.in | 4 ++--
- 1 file changed, 2 insertions(+), 2 deletions(-)
-
-diff --git a/Makefile.in b/Makefile.in
-index 860f351..f0fe08d 100644
---- a/Makefile.in
-+++ b/Makefile.in
-@@ -82,7 +82,7 @@ screen: $(OFILES)
- 	$(CC) -c -I. -I$(srcdir) $(M_CFLAGS) $(CPPFLAGS) $(DEFS) \
- 	    $(OPTIONS) $(CFLAGS) $<
- 
--install_bin: .version screen
-+install_bin: .version screen installdirs
- 	$(INSTALL_PROGRAM) screen $(DESTDIR)$(bindir)/$(SCREEN)
- 	-chown root $(DESTDIR)$(bindir)/$(SCREEN)
- 	-chmod 4755 $(DESTDIR)$(bindir)/$(SCREEN)
-@@ -94,7 +94,7 @@ endif
- 	cp $(srcdir)/utf8encodings/?? $(DESTDIR)$(SCREENENCODINGS)
- 
- ###############################################################################
--install: installdirs install_bin
-+install: install_bin
- 	cd doc ; $(MAKE) install
- 	-if [ -d /usr/lib/terminfo ]; then \
- 		PATH="$$PATH:/usr/5bin" tic ${srcdir}/terminfo/screeninfo.src; \
--- 
-1.8.4.5
-

rules/screen/patches/0010-rename-sched_h.patch

@@ -1,142 +0,0 @@
-From: Maarten ter Huurne <maarten@treewalker.org>
-Date: Mon, 15 Sep 2014 00:24:41 +0200
-Subject: Renamed sched.h to eventqueue.h
-
-There is a <sched.h> system header that got shadowed by "sched.h".
-While Screen itself doesn't include <sched.h>, other system headers
-might include it indirectly. This broke the build when using uClibc
-with pthread support.
-
-Signed-off-by: Maarten ter Huurne <maarten@treewalker.org>
----
- eventqueue.h | 48 ++++++++++++++++++++++++++++++++++++++++++++++++
- sched.h      | 48 ------------------------------------------------
- screen.h     |  2 +-
- 3 files changed, 49 insertions(+), 49 deletions(-)
- create mode 100644 eventqueue.h
- delete mode 100644 sched.h
-
-diff --git a/eventqueue.h b/eventqueue.h
-new file mode 100644
-index 0000000..fdc3fc4
---- /dev/null
-+++ b/eventqueue.h
-@@ -0,0 +1,48 @@
-+/* Copyright (c) 2008, 2009
-+ *      Juergen Weigert (jnweiger@immd4.informatik.uni-erlangen.de)
-+ *      Michael Schroeder (mlschroe@immd4.informatik.uni-erlangen.de)
-+ *      Micah Cowan (micah@cowan.name)
-+ *      Sadrul Habib Chowdhury (sadrul@users.sourceforge.net)
-+ * Copyright (c) 1993-2002, 2003, 2005, 2006, 2007
-+ *      Juergen Weigert (jnweiger@immd4.informatik.uni-erlangen.de)
-+ *      Michael Schroeder (mlschroe@immd4.informatik.uni-erlangen.de)
-+ * Copyright (c) 1987 Oliver Laumann
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License as published by
-+ * the Free Software Foundation; either version 3, or (at your option)
-+ * any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program (see the file COPYING); if not, see
-+ * http://www.gnu.org/licenses/, or contact Free Software Foundation, Inc.,
-+ * 51 Franklin Street, Fifth Floor, Boston, MA  02111-1301  USA
-+ *
-+ ****************************************************************
-+ * $Id$ GNU
-+ */
-+
-+struct event
-+{
-+  struct event *next;
-+  void (*handler) __P((struct event *, char *));
-+  char *data;
-+  int fd;
-+  int type;
-+  int pri;
-+  struct timeval timeout;
-+  int queued;		/* in evs queue */
-+  int active;		/* in fdset */
-+  int *condpos;		/* only active if condpos - condneg > 0 */
-+  int *condneg;
-+};
-+
-+#define EV_TIMEOUT	0
-+#define EV_READ		1
-+#define EV_WRITE	2
-+#define EV_ALWAYS	3
-diff --git a/sched.h b/sched.h
-deleted file mode 100644
-index fdc3fc4..0000000
---- a/sched.h
-+++ /dev/null
-@@ -1,48 +0,0 @@
--/* Copyright (c) 2008, 2009
-- *      Juergen Weigert (jnweiger@immd4.informatik.uni-erlangen.de)
-- *      Michael Schroeder (mlschroe@immd4.informatik.uni-erlangen.de)
-- *      Micah Cowan (micah@cowan.name)
-- *      Sadrul Habib Chowdhury (sadrul@users.sourceforge.net)
-- * Copyright (c) 1993-2002, 2003, 2005, 2006, 2007
-- *      Juergen Weigert (jnweiger@immd4.informatik.uni-erlangen.de)
-- *      Michael Schroeder (mlschroe@immd4.informatik.uni-erlangen.de)
-- * Copyright (c) 1987 Oliver Laumann
-- *
-- * This program is free software; you can redistribute it and/or modify
-- * it under the terms of the GNU General Public License as published by
-- * the Free Software Foundation; either version 3, or (at your option)
-- * any later version.
-- *
-- * This program is distributed in the hope that it will be useful,
-- * but WITHOUT ANY WARRANTY; without even the implied warranty of
-- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-- * GNU General Public License for more details.
-- *
-- * You should have received a copy of the GNU General Public License
-- * along with this program (see the file COPYING); if not, see
-- * http://www.gnu.org/licenses/, or contact Free Software Foundation, Inc.,
-- * 51 Franklin Street, Fifth Floor, Boston, MA  02111-1301  USA
-- *
-- ****************************************************************
-- * $Id$ GNU
-- */
--
--struct event
--{
--  struct event *next;
--  void (*handler) __P((struct event *, char *));
--  char *data;
--  int fd;
--  int type;
--  int pri;
--  struct timeval timeout;
--  int queued;		/* in evs queue */
--  int active;		/* in fdset */
--  int *condpos;		/* only active if condpos - condneg > 0 */
--  int *condneg;
--};
--
--#define EV_TIMEOUT	0
--#define EV_READ		1
--#define EV_WRITE	2
--#define EV_ALWAYS	3
-diff --git a/screen.h b/screen.h
-index 603ca3f..34238c8 100644
---- a/screen.h
-+++ b/screen.h
-@@ -43,7 +43,7 @@
- #include "osdef.h"
- 
- #include "ansi.h"
--#include "sched.h"
-+#include "eventqueue.h"
- #include "acls.h"
- #include "comm.h"
- #include "layer.h"
--- 
-1.8.4.5
-

rules/syslinux/extlinux.conf

@@ -1,6 +1,3 @@
 LABEL linux
    KERNEL /boot/kernel
    APPEND rootwait root=$cfg_kernel_boot_dev rootfstype=ext2 ro $cfg_kernel_extra_args
-
-LABEL memtest
-   LINUX /boot/memtest.bin

rules/u-boot/default.bash

@@ -1,6 +1,6 @@
 version=\
 (
-    '2017.05'
+    '2014.07'
 )
 
 url=\
@@ -10,7 +10,7 @@ url=\
 
 md5=\
 (
-    '1b9ab3707ded74bbde9405987f816969'
+    '36d4bad687edcafa396fee607e505d4e'
 )
 
 post_unpack()
@@ -43,11 +43,11 @@ host_install()
 
 target_install()
 {
-    $cmd_mkdir "$cfg_dir_rootfs/boot"
+    if [ -f MLO ]; then
+        $cmd_cp MLO "$cfg_dir_rootfs/boot"
+    fi
 
-    for f in MLO u-boot.img u-boot.bin; do
-        if [ -f "$f" ]; then
-            $cmd_cp "$f" "$cfg_dir_rootfs/boot"
-        fi
-    done
+    if [ -f u-boot.img ]; then
+        $cmd_cp u-boot.img "$cfg_dir_rootfs/boot"
+    fi
 }

rules/util-linux/host.bash

@@ -8,7 +8,6 @@ requires=\
 configure()
 {
     cd "$pkg_build_dir" &&
-    CFLAGS="-I$cfg_dir_toolchain/include" \
     "../util-linux-$version/configure" \
         --prefix="$cfg_dir_toolchain" \
         --disable-wall \

rules/uv4l/default.bash

@@ -1,41 +0,0 @@
-version=\
-(
-  "1.0.0"
-)
-
-url=\
-(
-  "http://lsts.pt/glued/uv4l.$version.tar.bz2"
-)
-
-md5=\
-(
-  "869e884accbfa9c2356e2fd9307dd71c"
-)
-
-maintainer=\
-(
-    'Pedro Gonçalves <pedro@lsts.pt>'
-)
-
-post_unpack()
-{
-    mv "../etc" "../uv4l-$version/"
-    mv "../usr" "../uv4l-$version/"
-}
-
-host_install()
-{
-  $cmd_cp -r "usr/lib/"*    "$cfg_dir_toolchain_sysroot/usr/lib/"
-  $cmd_cp -r "usr/include/"* "$cfg_dir_toolchain_sysroot/usr/include/"
-}
-
-target_install()
-{
-    $cmd_cp -r "usr/lib/"* "$cfg_dir_rootfs/usr/lib/"
-    $cmd_cp -r "usr/bin/"* "$cfg_dir_rootfs/usr/bin/"
-
-    tar -C "$pkg_dir/fs" -c -f - . | tar -C "$cfg_dir_rootfs" -x -v -f -
-}
-
-

rules/uv4l/fs/etc/rc.d/raspicam

@@ -1,28 +0,0 @@
-start()
-{
-    killall uv4l
-    modprobe cuse &&
-	uv4l \
-	    -nopreview \
-	    --auto-video_nr \
-	    --driver raspicam \
-	    --encoding h264 \
-	    --width 1080 \
-	    --height 720 \
-	    --framerate 20 \
-	    --quality 10 \
-	    --server-option \
-	    --port=9090 \
-	    --server-option \
-	    --max-queued-connections=30 \
-	    --server-option \
-	    --max-streams=25 \
-	    --server-option \
-	    --max-threads=29
-}
-
-stop()
-{
-    killall uv4l
-    rmmod uv4l
-}

systems/lauv-aux-rpi/CMRE-rpi.cfg

@@ -1,7 +0,0 @@
-cfg_hostname='lauv-aux-rpi-testbed'
-cfg_eth_ext_ip='10.0.200.24'
-cfg_eth_ext_mk='255.255.0.0'
-cfg_eth_ext_gw='10.0.0.1'
-cfg_ptpd_interface='eth0'
-cfg_packages='dropbear rsync busybox e2fsprogs dosfstools ptpd rpcbind nfs-utils rpi-boot-firmware linux/rpi libconfig log4cpp fftw socat crypto++ netcat screen rlwrap'
-

systems/lauv-aux-rpi/config

@@ -6,12 +6,13 @@ cfg_services1='lauv-storage-server'
 cfg_services2='dune'
 cfg_packages='dropbear rsync busybox e2fsprogs dosfstools ptpd rpcbind nfs-utils rpi-boot-firmware linux/rpi'
 cfg_target_linux_kernel='arch/arm/boot/zImage'
+cfg_target_linux_dtb='arch/arm/boot/dts/bcm2709-rpi-2-b.dtb'
 cfg_ptpd_interface='eth0'
 cfg_terminal='ttyAMA0'
 cfg_lauv_storage_dir='/opt/lsts/dune/log'
 cfg_partitions=\
 (
-    rpi-boot BOOT0  512B    32MiB
+    rpi-boot boot0  512B    32MiB
     root     root0  32MiB   544MiB
     data     data0  544MiB  -1
 )

systems/lauv-aux-rpi/fs/boot/config.txt

@@ -1,9 +0,0 @@
-# Core.
-arm_freq=1000
-
-# Disable BT on Rpi3.
-dtoverlay=pi3-disable-bt
-
-# Enable RasPicam
-start_x=1
-gpu_mem=128