Added T-REX support to noptilus aux CPUs.

Added T-REX to noptilus auxiliary cpus.
2017-06-06 11:43:21 +01:00 · 2017-06-06 08:52:21 +01:00
124 changed files with 2156 additions and 24856 deletions
--- a/.gitignore
+++ b/.gitignore
@ -11,4 +11,3 @@
 /ntnu-b2xx
 /stamp9g20
 /lctr-rpi
-build.bash
--- a/architectures/cortex-a72.cfg
+++ b/architectures/cortex-a72.cfg
@ -1,6 +0,0 @@
-cfg_target_canonical="armv11-$cfg_glued_vendor-linux-gnueabi"
-cfg_target_linux='arm'
-cfg_target_uboot_arch='arm'
-cfg_target_gcc_flags='-O2 -pipe -funit-at-a-time -mcpu=cortex-a72 -mtune=cortex-a72 -mfloat-abi=hard -mfpu=neon-fp-armv8'
-cfg_target_gcc_configure_flags='--with-cpu=cortex-a72 --with-tune=cortex-a72 --with-fpu=neon-fp-armv8 --with-float=hard'
-cfg_target_ar_flags='aarch64-elf'
--- a/docker/Dockerfile
+++ b/docker/Dockerfile
@ -35,4 +35,3 @@ RUN apt-get install -y git
 RUN apt-get install -y g++-multilib
 RUN apt-get install -y cmake
 RUN apt-get install -y file
-RUN apt-get install -y kmod
--- a/docker/Makefile
+++ b/docker/Makefile
@ -23,10 +23,9 @@
 TAG     := glued
 VERSION := 2016.05.0
 VOLUME  := $(CURDIR)/..
-DNS	:= 8.8.8.8

 all:
 	docker build -t $(TAG):$(VERSION) .

 shell:
-	docker run -w $(VOLUME) --dns=$(DNS) -i -a stdin -a stdout -v $(VOLUME):$(VOLUME) -t $(TAG):$(VERSION)
+	docker run -w $(VOLUME) -i -a stdin -a stdout -v $(VOLUME):$(VOLUME) -t $(TAG):$(VERSION)
--- a/functions.bash
+++ b/functions.bash
@ -1,6 +1,6 @@
 ###########################################################################
 # GLUED: GNU/Linux Uniform Environment Distribution                       #
-# Copyright (C) 2007-2019 Universidade do Porto - Faculdade de Engenharia #
+# Copyright (C) 2007-2017 Universidade do Porto - Faculdade de Engenharia #
 # Laboratório de Sistemas e Tecnologia Subaquática (LSTS)                 #
 ###########################################################################
 # This program is free software; you can redistribute it and/or modify    #
--- a/mkconfig.bash
+++ b/mkconfig.bash
@ -1,7 +1,7 @@
 #! /bin/bash
 ###########################################################################
 # GLUED: GNU/Linux Uniform Environment Distribution                       #
-# Copyright (C) 2007-2019 Universidade do Porto - Faculdade de Engenharia #
+# Copyright (C) 2007-2017 Universidade do Porto - Faculdade de Engenharia #
 # Laboratório de Sistemas e Tecnologia Subaquática (LSTS)                 #
 ###########################################################################
 # This program is free software; you can redistribute it and/or modify    #
@ -23,7 +23,7 @@
 ###########################################################################

 # Config: GLUED version.
-cfg_glued_version='2017.11'
+cfg_glued_version='2016.05'
 # Config: GLUED vendor.
 cfg_glued_vendor='lsts'

--- a/mkdisk.bash
+++ b/mkdisk.bash
@ -1,7 +1,7 @@
 #! /bin/bash
 ###########################################################################
 # GLUED: GNU/Linux Uniform Environment Distribution                       #
-# Copyright (C) 2007-2019 Universidade do Porto - Faculdade de Engenharia #
+# Copyright (C) 2007-2017 Universidade do Porto - Faculdade de Engenharia #
 # Laboratório de Sistemas e Tecnologia Subaquática (LSTS)                 #
 ###########################################################################
 # This program is free software; you can redistribute it and/or modify    #
--- a/mkpackage.bash
+++ b/mkpackage.bash
@ -1,7 +1,7 @@
 #! /bin/bash
 ###########################################################################
 # GLUED: GNU/Linux Uniform Environment Distribution                       #
-# Copyright (C) 2007-2019 Universidade do Porto - Faculdade de Engenharia #
+# Copyright (C) 2007-2017 Universidade do Porto - Faculdade de Engenharia #
 # Laboratório de Sistemas e Tecnologia Subaquática (LSTS)                 #
 ###########################################################################
 # This program is free software; you can redistribute it and/or modify    #
@ -71,11 +71,7 @@ download()
            fi
        fi

-	# First try LSTS mirror.
-	lsts_url="https://www.lsts.pt/glued/$(basename $u)"
-        download_tool "$lsts_url" "$cfg_dir_downloads/$file"
-        if [ $? -ne 0 ]; then
-	    # Then try OceanScan-MST mirror.
+        # First try OceanScan-MST mirror.
        omst_url="http://www.omst.pt/glued/$(basename $u)"
        download_tool "$omst_url" "$cfg_dir_downloads/$file"
        if [ $? -ne 0 ]; then
@ -86,7 +82,6 @@ download()
                exit 1
            fi
        fi
-	fi

        md5="$(md5sum_tool "$cfg_dir_downloads/$file")"
        if [ "$s" != "$md5" ]; then
--- a/mksystem.bash
+++ b/mksystem.bash
@ -1,7 +1,7 @@
 #! /bin/bash
 ###########################################################################
 # GLUED: GNU/Linux Uniform Environment Distribution                       #
-# Copyright (C) 2007-2019 Universidade do Porto - Faculdade de Engenharia #
+# Copyright (C) 2007-2017 Universidade do Porto - Faculdade de Engenharia #
 # Laboratório de Sistemas e Tecnologia Subaquática (LSTS)                 #
 ###########################################################################
 # This program is free software; you can redistribute it and/or modify    #
--- a/mkupdate.bash
+++ b/mkupdate.bash
@ -1,68 +0,0 @@
-#! /bin/bash
-###########################################################################
-# GLUED: GNU/Linux Uniform Environment Distribution                       #
-# Copyright (C) 2007-2019 Universidade do Porto - Faculdade de Engenharia #
-# Laboratório de Sistemas e Tecnologia Subaquática (LSTS)                 #
-###########################################################################
-# This program is free software; you can redistribute it and/or modify    #
-# it under the terms of the GNU General Public License as published by    #
-# the Free Software Foundation; either version 2 of the License, or (at   #
-# your option) any later version.                                         #
-#                                                                         #
-# This program is distributed in the hope that it will be useful, but     #
-# WITHOUT ANY WARRANTY; without even the implied warranty of              #
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU       #
-# General Public License for more details.                                #
-#                                                                         #
-# You should have received a copy of the GNU General Public License       #
-# along with this program; if not, write to the Free Software             #
-# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA           #
-# 02110-1301 USA.                                                         #
-###########################################################################
-# Author: Tiago Marques                                                   #
-###########################################################################
-
-update_tool()
-{
-    rsync -v "$1" root@"$2":/opt/"$cfg_glued_vendor"/glued/
-    if [ $? -eq 0 ]; then
-        return 0
-    fi
-
-    scp "$1" root@"$2":/opt/"$cfg_glued_vendor"/glued/
-    if [ $? -eq 0 ]; then
-        return 0
-    fi
-
-    return 1
-}
-
-# Check command line arguments.
-if [ $# -lt 1 ]; then
-    echo "Usage: $0 <config>"
-    exit 1
-fi
-
-# Read system configuration file.
-if ! [ -f "$1" ]; then
-    echo -e "\e[1;31mERROR: invalid configuration file '$1'\e[0m"
-    exit 1
-fi
-
-# Read system configuration file.
-source "$1"
-
-if [ ! -f "$cfg_rootfs_tar" ];
-then
-    echo -e "\e[1;31mERROR: You should run ./pkrootfs $1\e[0m"
-    exit 1
-fi
-
-# check for dirty repo
-if [[ "$cfg_glued_git_version" =~ .*-dirty$ ]]
-then
-    echo -e "\e[1;31mThis glued's version is dirty\e[0m"
-fi
-
-# send package to the system
-update_tool "$cfg_rootfs_tar" "$cfg_eth_ext_ip"
--- a/pkrootfs.bash
+++ b/pkrootfs.bash
@ -1,7 +1,7 @@
 #! /bin/bash
 ###########################################################################
 # GLUED: GNU/Linux Uniform Environment Distribution                       #
-# Copyright (C) 2007-2019 Universidade do Porto - Faculdade de Engenharia #
+# Copyright (C) 2007-2017 Universidade do Porto - Faculdade de Engenharia #
 # Laboratório de Sistemas e Tecnologia Subaquática (LSTS)                 #
 ###########################################################################
 # This program is free software; you can redistribute it and/or modify    #
--- a/pktoolchain.bash
+++ b/pktoolchain.bash
@ -1,7 +1,7 @@
 #! /bin/bash
 ###########################################################################
 # GLUED: GNU/Linux Uniform Environment Distribution                       #
-# Copyright (C) 2007-2019 Universidade do Porto - Faculdade de Engenharia #
+# Copyright (C) 2007-2017 Universidade do Porto - Faculdade de Engenharia #
 # Laboratório de Sistemas e Tecnologia Subaquática (LSTS)                 #
 ###########################################################################
 # This program is free software; you can redistribute it and/or modify    #
--- a/rules/base/host.bash
+++ b/rules/base/host.bash
@ -26,5 +26,4 @@ requires=\
    'parted/host'
    'dosfstools/host'
    'e2fsprogs/host'
-    'cmake/host'
 )
--- a/rules/boost/default.bash
+++ b/rules/boost/default.bash
@ -37,8 +37,7 @@ configure()
 {
    cd "../boost_$vendor_version" &&
    ./bootstrap.sh \
-        --with-icu="$cfg_dir_toolchain_sysroot/usr" \
-        --with-libraries="regex,filesystem,system,thread"
+        --with-icu="$cfg_dir_toolchain_sysroot/usr"

    GXX_VER=$(${cmd_target_cxx} -dumpversion)
    echo "using gcc : ${GXX_VER}  : ${cmd_target_cxx} : <cxxflags>\"-pipe -Os  -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 ${cfg_target_gcc_flags} \" <linkflags>\"\" ;" > user-config.jam
--- a/rules/bridge-utils/default.bash
+++ b/rules/bridge-utils/default.bash
@ -1,16 +1,16 @@
 version=\
 (
-    '1.6'
+    '1.5'
 )

 url=\
 (
-    "http://www.kernel.org/pub/linux/utils/net/bridge-utils/bridge-utils-$version.tar.gz"
+    "http://downloads.sourceforge.net/project/bridge/bridge/bridge-utils-$version.tar.gz"
 )

 md5=\
 (
-    'f369e90e85e4bb46baa26a7b9d66b578'
+    'ec7b381160b340648dede58c31bb2238'
 )

 maintainer=\
--- a/rules/bridge-utils/patches-1.5/00-build-fix.patch
+++ b/rules/bridge-utils/patches-1.5/00-build-fix.patch
--- a/rules/curl/default.bash
+++ b/rules/curl/default.bash
@ -35,11 +35,6 @@ build()
 host_install()
 {
    $cmd_make install
-    # make available for cross compilation
-    for f in "${cfg_dir_toolchain_sysroot}/usr/lib/"libcurl*so*; do
-        echo "Doing $f"
-        ln -s -f "$f" "${cfg_dir_toolchain}/lib"
-    done
 }

 target_install()
--- a/rules/czmq/default.bash
+++ b/rules/czmq/default.bash
@ -1,52 +0,0 @@
-version=\
-(
-    "3.0.2"
-)
-
-url=\
-(
-    "https://github.com/zeromq/czmq/archive/v$version.tar.gz"
-)
-
-md5=\
-(
-    "23e9885f7ee3ce88d99d0425f52e9be1"
-)
-
-configure()
-{
-    ./autogen.sh && \
-    ./configure \
-        --prefix="${cfg_dir_toolchain_sysroot}/usr" \
-        --target="$cfg_target_canonical" \
-        --host="$cfg_target_canonical" \
-        --build="$cfg_host_canonical"
-}
-
-build()
-{
-    $cmd_make
-}
-
-host_install()
-{
-    $cmd_make install
-}
-
-requires=\
-(
-    'libtool/host'
-    'zeromq'
-)
-
-target_install()
-{
-  # Libs:
-  for f in "$cfg_dir_toolchain_sysroot/usr/lib/"libczmq.*; do
-    if [ -L "$f" ]; then
-      $cmd_cp "$f" "$cfg_dir_rootfs/usr/lib"
-    else
-      $cmd_target_strip -v "$f" -o "$cfg_dir_rootfs/usr/lib/$(basename "$f")"
-    fi
-  done
-}
--- a/rules/dune/default.bash
+++ b/rules/dune/default.bash
@ -1,37 +0,0 @@
-version=\
-(
-    'master'
-)
-
-requires=\
-(
-    'cmake/host'
-)
-
-download()
-{
-    git clone "git@github.com:LSTS/dune.git" dune &&
-        cd dune && git checkout "$version" && cd - &&
-        git clone "git@git.lsts.pt:dune-private.git" dune/private &&
-        cd dune/private && git checkout "$version" && cd -
-}
-
-configure()
-{
-    $cmd_mkdir build &&
-        cd build &&
-        cmake \
-            -DCMAKE_INSTALL_PREFIX="$cfg_dir_toolchain_sysroot/usr" \
-            -DCROSS="$cmd_target_cc" \
-            ../dune
-}
-
-build()
-{
-    $cmd_make -C build
-}
-
-host_install()
-{
-    $cmd_make -C build install
-}
--- a/rules/escc/default.bash
+++ b/rules/escc/default.bash
@ -1,6 +1,6 @@
 version=\
 (
-    '1.0.71'
+    '1.0.7'
 )

 url=\
@ -10,7 +10,7 @@ url=\

 md5=\
 (
-    '075c9256fe20cf6ce867dc2b1c974ebe'
+    '4e18a516249256e2dad4d79ae56c913d'
 )

 if [ -d "$cfg_dir_builds/linux/linux-"* ]; then
--- a/rules/exiftool/default.bash
+++ b/rules/exiftool/default.bash
@ -1,37 +0,0 @@
-version=\
-(
-  "10.96"
-)
-
-url=\
-(
-  "https://lsts.pt/glued/exiftoolBin-${version}.tar.gz"
-)
-
-md5=\
-(
-  "71d52bf2d75f023b844dd8c9100daaff"
-)
-
-maintainer=\
-(
-  'Pedro Gonçalves <pedro@lsts.pt>'
-)
-
-requires=\
-(
-    'perl/default'
-)
-
-post_unpack()
-{
-    $cmd_cp -r ../exiftoolBin-${version}/* .
-}
-
-target_install()
-{
-   $cmd_cp -rv usr/* $cfg_dir_toolchain_sysroot/usr/
-   $cmd_cp -rv usr/* $cfg_dir_rootfs/usr/
-   $cmd_cp -rv usr/local/bin/* $cfg_dir_rootfs/usr/bin/
-}
-
--- a/rules/exiv2/default.bash
+++ b/rules/exiv2/default.bash
@ -1,57 +0,0 @@
-version=\
-(
-  "0.25"
-)
-
-url=\
-(
-  "http://lsts.pt/glued/exiv2-${version}.tar.gz"
-)
-
-md5=\
-(
-  "258d4831b30f75a01e0234065c6c2806"
-)
-
-maintainer=\
-(
-    'Pedro Gonçalves <pedro@lsts.pt>'
-)
-
-requires=\
-(
-    "gettext/host"
-)
-
-configure()
-{
-  ./configure \
-    --datadir="$cfg_dir_toolchain_sysroot" \
-    --prefix="$cfg_dir_rootfs/usr" \
-    --includedir="$cfg_dir_toolchain_sysroot/usr/include" \
-    --enable-cross-compile \
-    --build=$cfg_target_linux \
-    --host="$cfg_target_canonical" \
-    --enable-shared \
-    --disable-static \
-    --disable-xmp
-}
-
-build()
-{
-  $cmd_make
-}
-
-host_install()
-{
-  $cmd_make install
-}
-
-target_install()
-{
-  # Libs:
-  for f in "$cfg_dir_rootfs/lib/"libexiv2*; do
-      cp -av "$f" "$cfg_dir_toolchain_sysroot/usr/lib"
-  done
-}
-
--- a/rules/ffmpeg/default.bash
+++ b/rules/ffmpeg/default.bash
@ -15,14 +15,12 @@ md5=\

 configure()
 {
-    mkdir -p ../build
    ./configure \
        --sysroot="$cfg_dir_toolchain_sysroot" \
        --prefix="$cfg_dir_rootfs/usr" \
        --incdir="$cfg_dir_toolchain_sysroot/usr/include" \
        --enable-cross-compile \
        --cross-prefix="$cfg_target_canonical-" \
-        --libdir="$cfg_dir_builds/ffmpeg/build" \
        --target-os="linux" \
        --enable-shared \
        --disable-static \
@ -41,16 +39,10 @@ host_install()
    $cmd_make \
 	LIBDIR="$cfg_dir_toolchain_sysroot/usr/lib" \
        install-headers
-
-    $cmd_make \
-        install-libs
 }

 target_install()
 {
    $cmd_make \
        install-libs
-
-    $cmd_cp -r "$cfg_dir_builds/ffmpeg/build/"* "$cfg_dir_rootfs/usr/lib/"
-    $cmd_cp -r "$cfg_dir_builds/ffmpeg/build/"* "$cfg_dir_toolchain_sysroot/usr/lib/"
 }
--- a/rules/filesystem/fs/etc/rc.d/check_wlan
+++ b/rules/filesystem/fs/etc/rc.d/check_wlan
@ -1,15 +0,0 @@
-start()
-{
-    if [ ! -f /opt/check_wlan ]; then
-        cp -ri /etc/check_wlan /opt/
-    fi
-
-    sh /opt/check_wlan  < /dev/null > /dev/null 2>&1 &
-}
-
-stop()
-{
-    echo "* Stopping process..."
-    killall sh /opt/check_wlan -9 > /dev/null 2>&1
-    echo "* Process not running."
-}
--- a/rules/filesystem/fs/etc/rc.d/network-wlan
+++ b/rules/filesystem/fs/etc/rc.d/network-wlan
@ -1,87 +0,0 @@
-start()
-{
-    ifconfig wlan0 up
-    if [ -n "$cfg_eth_ext_ip$cfg_eth_prv_ip" ]; then
-        while [ 1 ]; do
-            echo "* Waiting for wlan0 device..."
-            ifconfig wlan0 > /dev/null 2>&1
-            [ $? -eq 0 ] && break
-            usleep 250000
-        done
-    fi
-
-    if [ -n "$cfg_bridge0_ip" ]; then
-        for itf in $cfg_bridge0_itfs; do
-            ifconfig $itf 0.0.0.0
-        done
-
-        brctl addbr bridge0
-
-        for itf in $cfg_bridge0_itfs; do
-            brctl addif bridge0 $itf
-        done
-
-        ifconfig bridge0 $cfg_bridge0_ip netmask $cfg_bridge0_nmask up
-        ifconfig bridge0 multicast
-        route add -net 224.0.0.0 netmask 240.0.0.0 dev bridge0
-    fi
-
-    # Public ethernet.
-    if [ -n "$cfg_eth_ext_ip" ]; then
-        if [ -n "$cfg_eth_ext_mk" ]; then
-            ifconfig wlan0 "$cfg_eth_ext_ip" netmask "$cfg_eth_ext_mk" up
-        else
-            ifconfig wlan0 "$cfg_eth_ext_ip" up
-        fi
-        ifconfig wlan0 multicast
-        route add -net 224.0.0.0 netmask 240.0.0.0 dev wlan0
-
-        # Fixed mac address with $cfg_eth_ext_mac based derivated from IP address $cfg_eth_ext_ip
-        if [ -n "$cfg_eth_ext_mac" ]; then
-          ifconfig wlan0 hw ether $cfg_eth_ext_mac
-        fi
-    fi
-
-    if [ -n "$cfg_eth_ext_gw" ]; then
-        route add default gw "$cfg_eth_ext_gw"
-    fi
-
-    if [ -n "$cfg_eth_ext_dns" ]; then
-        echo "nameserver $cfg_eth_ext_dns" > /etc/resolv.conf
-    fi
-
-    # Private ethernet.
-    if [ -n "$cfg_eth_prv_ip" ]; then
-        ifconfig wlan0:prv "$cfg_eth_prv_ip" up
-    fi
-
-    # Static ARP table.
-    if [ -n "$cfg_arp_table" ]; then
-        for e in $cfg_arp_table; do
-            ip="$(echo $e | cut -f1 -d'|')"
-            mac="$(echo $e | cut -f2 -d'|')"
-            arp -s "$ip" "$mac"
-        done
-    fi
-
-    iw wlan0 connect LSTS
-    ifconfig eth0 down
-}
-
-stop()
-{
-    # Public ethernet.
-    if [ -n "$cfg_eth_ext_gw" ]; then
-        route del default
-    fi
-
-    if [ -n "$cfg_eth_ext_ip" ]; then
-        route del -net 224.0.0.0 netmask 240.0.0.0 dev wlan0
-        ifconfig wlan0 down
-    fi
-
-    # Private ethernet.
-    if [ -n "$cfg_eth_prv_ip" ]; then
-        ifconfig wlan0:prv down
-    fi
-}
--- a/rules/gcc/cross.bash
+++ b/rules/gcc/cross.bash
@ -49,15 +49,10 @@ host_install()

 target_install()
 {
-    libdir=lib
-    if [ -d "$cfg_dir_toolchain/$cfg_target_canonical/lib64" ]; then
-        libdir=lib64
-    fi
-
    $cmd_mkdir \
-        "$cfg_dir_rootfs/usr/$libdir" &&
+        "$cfg_dir_rootfs/usr/lib" &&

-    for f in "$cfg_dir_toolchain/$cfg_target_canonical/$libdir/"{libgcc_s,libstdc++}.so*; do
+    for f in "$cfg_dir_toolchain/$cfg_target_canonical/lib/"{libgcc_s,libstdc++}.so*; do
        base="$(basename $f)"

        if [ $(echo "$base" | grep '\.py' 2> /dev/null) ]; then
--- a/rules/gdb/common.bash
+++ b/rules/gdb/common.bash
@ -1,6 +1,6 @@
 version=\
 (
-    '7.10.1'
+    '7.8.2'
 )

 url=\
@ -10,5 +10,5 @@ url=\

 md5=\
 (
-    '39e654460c9cdd80200a29ac020cfe11'
+    'a80cf252ed2e775d4e4533341bbf2459'
 )
--- a/rules/iw/default.bash
+++ b/rules/iw/default.bash
@ -1,34 +0,0 @@
-version=\
-(
-    "4.9"
-)
-
-url=\
-(
-    "http://lsts.pt/glued/iw-$version.tar.bz2"
-)
-
-md5=\
-(
-  "ae8ccaa154449300c2c02eb90a37eebb"
-)
-
-maintainer=\
-(
-    'Pedro Gonçalves <pedro@lsts.pt>'
-)
-
-configure()
-{
-    mv "../iw_$version/etc" "../iw-$version/"
-    mv "../iw_$version/lib" "../iw-$version/"
-    mv "../iw_$version/sbin" "../iw-$version/"
-}
-
-target_install()
-{
-    $cmd_cp -r "etc/"* "$cfg_dir_rootfs/etc/"
-    $cmd_cp -r "sbin/"* "$cfg_dir_rootfs/sbin/"
-    $cmd_cp -r "lib/"* "$cfg_dir_rootfs/lib/"
-    $cmd_cp -r "$pkg_dir/fs/"* "$cfg_dir_rootfs/"
-}
--- a/rules/iw/fs/etc/check_wlan
+++ b/rules/iw/fs/etc/check_wlan
@ -1,46 +0,0 @@
-#!/bin/bash
-export PATH=/bin:/sbin:/usr/bin:/usr/sbin:/usr/bin:/bin
-
-############################# USER INPUT ###########################
-
-ip_dest=10.0.30.3
-
-####################################################################
-
-
-############### DON'T EDIT ##########################################
-
-check_interval=1
-log=/opt/.wifi.log
-wlan=wlan0
-eth=eth0
-
-exec 1> /dev/null
-exec 2>> $log
-echo $(date) > $log
-# without check_interval set, we risk a 0 sleep = busy loop
-if [ ! "$check_interval" ]; then
-        echo "No check interval set!" >> $log
-        exit 1
-fi
-
-startWifi () {
-   iw wlan0 connect LSTS >> $log
-}
-
-ifconfig $eth down
-ifconfig $wlan up
-
-while [ 1 ]; do
-        ping -q -c1 $ip_dest > /dev/null
-        if [ $? -ne 0 ]; then
-                echo $(date)" attempting restart..." >> $log
-                startWifi
-                sleep 1
-        else
-                echo "IS LINKED" >> $log
-                sleep $check_interval
-        fi
-done
-
-#####################################################################
--- a/rules/jansson/default.bash
+++ b/rules/jansson/default.bash
@ -1,45 +0,0 @@
-version=\
-(
-    "2.7"
-)
-
-url=\
-(
-    "http://www.digip.org/jansson/releases/jansson-2.7.tar.gz"
-)
-
-md5=\
-(
-    "3a106a465bbb77637550b422f5b262ef"
-)
-
-configure()
-{
-    ./configure \
-        --prefix="${cfg_dir_toolchain_sysroot}/usr" \
-        --target="$cfg_target_canonical" \
-        --host="$cfg_target_canonical" \
-        --build="$cfg_host_canonical"
-}
-
-build()
-{
-    $cmd_make
-}
-
-host_install()
-{
-    $cmd_make install
-}
-
-target_install()
-{
-  # Libs:
-  for f in "$cfg_dir_toolchain_sysroot/usr/lib/"libjansson.*; do
-    if [ -L "$f" ]; then
-      $cmd_cp "$f" "$cfg_dir_rootfs/usr/lib"
-    else
-      $cmd_target_strip -v "$f" -o "$cfg_dir_rootfs/usr/lib/$(basename "$f")"
-    fi
-  done
-}
--- a/rules/kplex/default.bash
+++ b/rules/kplex/default.bash
@ -1,25 +0,0 @@
-version=\
-(
-    '1.4'
-)
-
-url=\
-(
-    "https://github.com/stripydog/kplex/archive/v$version.tar.gz"
-)
-
-md5=\
-(
-    'df198384d2d7dee4b802136f4f9e9d44'
-)
-
-build()
-{
-    cd ../kplex-$version && $cmd_make VERBOSE=1 CC="$cmd_target_cc"
-}
-
-target_install()
-{
-    $cmd_cp ../kplex-$version/kplex "$cfg_dir_rootfs/usr/bin/kplex"
-}
-
--- a/rules/linux-headers/cross.bash
+++ b/rules/linux-headers/cross.bash
@ -1,16 +1,16 @@
 version=\
 (
-    '4.4.66'
+    '3.14.63'
 )

 url=\
 (
-    "https://www.kernel.org/pub/linux/kernel/v4.x/linux-$version.tar.xz"
+    "https://www.kernel.org/pub/linux/kernel/v3.x/linux-$version.tar.xz"
 )

 md5=\
 (
-    '5353de56bf4621a35afc4384c7e51f30'
+    '6cf8a6b23849f47f511e0e46cfdb6392'
 )

 maintainer=\
--- a/rules/linux/default.bash
+++ b/rules/linux/default.bash
@ -1,16 +1,16 @@
 version=\
 (
-    '4.4.66'
+    '3.14.63'
 )

 url=\
 (
-    "https://www.kernel.org/pub/linux/kernel/v4.x/linux-$version.tar.xz"
+    "https://www.kernel.org/pub/linux/kernel/v3.x/linux-$version.tar.xz"
 )

 md5=\
 (
-    '5353de56bf4621a35afc4384c7e51f30'
+    '6cf8a6b23849f47f511e0e46cfdb6392'
 )

 maintainer=\
@ -128,12 +128,14 @@ build()
    $cmd_make \
        CROSS_COMPILE=$cfg_target_canonical- \
        ARCH=$cfg_target_linux \
+        DEPMOD="$cfg_dir_toolchain/sbin/depmod" \
        modules || return 1

    if [ "$(basename $cfg_target_linux_kernel)" = 'uImage' ]; then
        $cmd_make \
            CROSS_COMPILE=$cfg_target_canonical- \
            ARCH=$cfg_target_linux \
+            DEPMOD="$cfg_dir_toolchain/sbin/depmod" \
            uImage || return 1
    fi

@ -142,6 +144,7 @@ build()
        $cmd_make \
            CROSS_COMPILE=$cfg_target_canonical- \
            ARCH=$cfg_target_linux \
+            DEPMOD="$cfg_dir_toolchain/sbin/depmod" \
            zImage || return 1
    fi

@ -150,6 +153,7 @@ build()
        $cmd_make \
            CROSS_COMPILE=$cfg_target_canonical- \
            ARCH=$cfg_target_linux \
+            DEPMOD="$cfg_dir_toolchain/sbin/depmod" \
            dtbs || return 1
    fi

@ -194,6 +198,7 @@ target_install()
        ARCH="$cfg_target_linux" \
        INSTALL_MOD_PATH="$cfg_dir_rootfs/usr" \
        KBUILD_VERBOSE=1 \
+        DEPMOD="$cfg_dir_toolchain/sbin/depmod" \
        modules_install

    $cmd_make \
@ -201,5 +206,6 @@ target_install()
        ARCH="$cfg_target_linux" \
        INSTALL_MOD_PATH="$cfg_dir_rootfs/usr" \
        KBUILD_VERBOSE=1 \
+        DEPMOD="$cfg_dir_toolchain/sbin/depmod" \
        firmware_install
 }
--- a/rules/linux/rpi.bash
+++ b/rules/linux/rpi.bash
@ -2,19 +2,21 @@

 version=\
 (
-    '4.4_2017-01-27'
+    '3.18_2015-06-03'
 )

 url=\
 (
-    "http://lsts.pt/glued/rpi-linux-$version.zip"
+    "https://github.com/rasmartins/rpi-linux/archive/rpi-linux-$version.tar.gz"
 )

 md5=\
 (
-    'f31d48a9d2c93509b35e750be489b44c'
+    '0b0255e50ca358b619bb78653ac2db2e'
 )

-build_dir="rpi-linux-rpi-linux-$version"
-
-find_patches
+post_unpack()
+{
+    rmdir "../linux-$version" &&
+        mv "../rpi-linux-rpi-linux-$version" "../linux-$version"
+}
--- a/rules/linux/rt.bash
+++ b/rules/linux/rt.bash
@ -2,12 +2,12 @@

 version=\
 (
-    '4.4.66-rt79'
+    '3.14.64-rt67'
 )

 url=\
 (
-    "https://www.kernel.org/pub/linux/kernel/v4.x/linux-$(linux_mmp_version).tar.xz"
+    "https://www.kernel.org/pub/linux/kernel/v3.x/linux-$(linux_mmp_version).tar.xz"
    "https://www.kernel.org/pub/linux/kernel/projects/rt/$(linux_mm_version)/patch-$version.patch.gz"
 )

--- a/rules/linux/v3_14.bash
+++ b/rules/linux/v3_14.bash
@ -1,206 +0,0 @@
-version=\
-(
-    '3.14.63'
-)
-
-url=\
-(
-    "https://www.kernel.org/pub/linux/kernel/v3.x/linux-$version.tar.xz"
-)
-
-md5=\
-(
-    '6cf8a6b23849f47f511e0e46cfdb6392'
-)
-
-maintainer=\
-(
-    'Ricardo Martins <rasm@fe.up.pt>'
-)
-
-requires=\
-(
-    'bc/host'
-    'kmod/host'
-    'lz4/host'
-)
-
-# This variable is updated by find_patches().
-patches=()
-
-# Major/Minor version.
-linux_mm_version()
-{
-    echo "$version" | cut -f1-2 -d.
-}
-
-# Major/Minor/Patch version.
-linux_mmp_version()
-{
-    echo "$version" | cut -f1 -d-
-}
-
-find_patches()
-{
-    patches=(\
-        $(ls -1 \
-             "$pkg_dir/patches/$version/"*.patch \
-             "$pkg_dir/patches/$(linux_mmp_version)/"*.patch \
-             "$pkg_dir/patches/$(linux_mm_version)/"*.patch \
-             "$cfg_dir_system/patches/linux/$version/"*.patch \
-             "$cfg_dir_system/patches/linux/$(linux_mmp_version)/"*.patch \
-             "$cfg_dir_system/patches/linux/$(linux_mm_version)/"*.patch \
-             2> /dev/null | awk '!a[$0]++')
-    )
-}
-
-find_patches
-
-# Get configuration file.
-linux_cfg_file()
-{
-    for f in "$version" "$(linux_mmp_version)" "$(linux_mm_version)"; do
-        f="$cfg_dir_system/cfg/linux-$f.cfg"
-        if [ -f "$f" ]; then
-            echo "$f"
-            return 0
-        fi
-
-        echo "Candidate kernel configuration file '$f' doesn't exist." 1>&2
-    done
-
-    echo "ERROR: failed to find a valid kernel configuration file." 1>&2
-    return 1
-}
-
-post_unpack()
-{
-    cp -r ../linux-3.14.63/* ../linux_3.3-3.14.63
-    n=0; while [ -n "${patches[$n]}" ]; do
-             patch="${patches[$n]}"
-             echo "* Applying $patch..."
-             (ucat "$patch" | patch -p1) || return 1
-             let n++
-         done
-
-    if [ -d "$cfg_dir_toolchain/firmware" ]; then
-        tar -C "$cfg_dir_toolchain/firmware" -c -v -f - . | tar -C firmware -x -v -f -
-    fi
-}
-
-refresh()
-{
-    for rule in configure build target_install; do
-        if [ "$(linux_cfg_file)" -nt "$cfg_dir_builds/linux/$pkg_var/.$rule" ]; then
-            rm "$cfg_dir_builds/linux/$pkg_var/.$rule"
-        fi
-    done
-}
-
-configure()
-{
-    $cmd_make \
-        ARCH=${cfg_target_linux} \
-        mrproper || return 1
-
-    cfg="$(linux_cfg_file)"
-    [ -n "$cfg" ] || return 1
-    $cmd_cp "$cfg" .config || return 1
-
-    if [ -f "$cfg_dir_system/files/initramfs_init.sh" ]; then
-        $cmd_mkdir initramfs &&
-        $cmd_cp "$pkg_dir/files/initramfs.conf" . &&
-        $cmd_cp "$cfg_dir_system/files/initramfs_init.sh" initramfs/init.sh &&
-        $cmd_cp "$cfg_dir_rootfs/bin/busybox" initramfs/busybox
-    fi
-
-    yes '' | $cmd_make \
-        CROSS_COMPILE=${cfg_target_canonical}- \
-        ARCH=${cfg_target_linux} \
-        oldconfig
-}
-
-build()
-{
-    $cmd_make \
-        CROSS_COMPILE=$cfg_target_canonical- \
-        ARCH=$cfg_target_linux || return 1
-
-    $cmd_make \
-        CROSS_COMPILE=$cfg_target_canonical- \
-        ARCH=$cfg_target_linux \
-        modules || return 1
-
-    if [ "$(basename $cfg_target_linux_kernel)" = 'uImage' ]; then
-        $cmd_make \
-            CROSS_COMPILE=$cfg_target_canonical- \
-            ARCH=$cfg_target_linux \
-            uImage || return 1
-    fi
-
-    # Compressed image.
-    if [ "$(basename $cfg_target_linux_kernel)" = 'zImage' ]; then
-        $cmd_make \
-            CROSS_COMPILE=$cfg_target_canonical- \
-            ARCH=$cfg_target_linux \
-            zImage || return 1
-    fi
-
-    # Device tree blob.
-    if [ -n "$cfg_target_linux_dtb" ]; then
-        $cmd_make \
-            CROSS_COMPILE=$cfg_target_canonical- \
-            ARCH=$cfg_target_linux \
-            dtbs || return 1
-    fi
-
-    if [ -n "${cfg_target_linux_size}" ]; then
-        dd if="$cfg_target_linux_kernel" of="${cfg_target_linux_kernel}.padded" \
-            ibs="${cfg_target_linux_size}" conv=sync &&
-        mv "${cfg_target_linux_kernel}.padded" "${cfg_target_linux_kernel}"
-    fi
-}
-
-target_install()
-{
-    if [ -n "$(file "$cfg_target_linux_kernel" | grep ELF)" ]; then
-        strip="$(echo $cfg_dir_toolchain/bin/*-strip)"
-        $strip -s -R .comment "$cfg_target_linux_kernel"
-    fi
-
-    # Kernel image.
-    if [ -n "$cfg_target_linux_kernel" ]; then
-        cp -v "$cfg_target_linux_kernel" "$cfg_dir_rootfs/boot/kernel"
-    else
-        echo "ERROR: failed to find kernel image at '$cfg_target_linux_kernel'"
-        return 1
-    fi
-
-    # Device tree blobs.
-    dts="arch/$cfg_target_linux/boot/dts"
-    if [ -d "$dts" ]; then
-        $cmd_mkdir "$cfg_dir_rootfs/boot" &&
-            cp -v "$dts/"*.dtb "$cfg_dir_rootfs/boot"
-    fi
-
-    # Device tree overlays.
-    overlays_dir="arch/$cfg_target_linux/boot/dts/overlays"
-    if [ -d "$overlays_dir" ]; then
-	$cmd_mkdir "$cfg_dir_rootfs/boot/overlays" || return 1
-        $cmd_cp "$overlays_dir"/*.dtbo "$cfg_dir_rootfs/boot/overlays" || return 1
-    fi
-
-    $cmd_make \
-        CROSS_COMPILE="$cfg_target_canonical-" \
-        ARCH="$cfg_target_linux" \
-        INSTALL_MOD_PATH="$cfg_dir_rootfs/usr" \
-        KBUILD_VERBOSE=1 \
-        modules_install
-
-    $cmd_make \
-        CROSS_COMPILE="$cfg_target_canonical-" \
-        ARCH="$cfg_target_linux" \
-        INSTALL_MOD_PATH="$cfg_dir_rootfs/usr" \
-        KBUILD_VERBOSE=1 \
-        firmware_install
-}
--- a/rules/lpg/default.bash
+++ b/rules/lpg/default.bash
@ -1,38 +0,0 @@
-version=\
-(
-	   "1.2"
-)
-
-url=\
-(
-    "http://lsts.pt/glued/lpg-$version.tar.gz"
-)
-
-md5=\
-(
-    "d71e2f282372a5cb1021d9e457a3d53f"
-)
-
-requires=\
-(
-    'bison/host'
-    'flex/host'
-)
-
-configure()
-{
-    ./configure "$cfg_target_canonical-gcc"
-}
-
-build()
-{
-    $cmd_make \
-	BISON="$cfg_dir_toolchain/bin/bison" \
-	FLEX="$cfg_dir_toolchain/bin/flex"
-    
-}
-
-target_install()
-{
-    $cmd_cp "lpg" "$cfg_dir_rootfs/usr/bin"
-}
--- a/rules/memtest86+/default.bash
+++ b/rules/memtest86+/default.bash
@ -1,32 +0,0 @@
-version=\
-(
-    "5.01"
-)
-
-url=\
-(
-    "http://www.lsts.pt/glued/memtest86+-$version.tar.gz"
-)
-
-md5=\
-(
-    "035b85f2edabc9b4a6b0cf6c9c3acf50"
-)
-
-maintainer=\
-(
-    'Tiago Sá Marques <tsmarques@fe.up.pt>'
-)
-
-build()
-{
-    $cmd_make \
-        CC=$cmd_target_cc \
-        CXX=$cmd_target_cxx
-}
-
-target_install()
-{
-    $cmd_cp ./memtest.bin $cfg_dir_rootfs/boot/
-    tar -C "$pkg_dir/fs" --exclude .svn -c -f - . | tar -C "$cfg_dir_rootfs" -x -v -f -
-}
--- a/rules/memtest86+/fs/usr/bin/start-memtest
+++ b/rules/memtest86+/fs/usr/bin/start-memtest
@ -1,14 +0,0 @@
-#! /bin/sh
-
-echo "Starting memtest in 10 seconds (requires reboot), Ctrl-C to cancel..."
-for r in 0 1 2 3 4 5 6 7 8 9; do
-    printf "."
-    sleep 1
-done
-
-mount -o remount,rw /
-extlinux -o "memtest" /boot/extlinux/
-mount -o remount,ro /
-
-echo "* Rebooting now"
-reboot
--- a/rules/opencv/default.bash
+++ b/rules/opencv/default.bash
@ -63,11 +63,6 @@ host_install()
 {
    cd  ${pkg_build_dir}/../build &&
    $cmd_make install
-
-    # make available for cross compilation
-    for f in "$cfg_dir_toolchain_sysroot/usr/lib/"libopencv*so*; do
-       ln -s -f "$f" "$cfg_dir_toolchain/lib"
-    done
 }

 target_install()
--- a/rules/openssh/default.bash
+++ b/rules/openssh/default.bash
@ -30,7 +30,6 @@ configure()
        --target="$cfg_target_canonical" \
        --host="$cfg_target_canonical" \
        --build="$cfg_host_canonical" \
-        --with-privsep-path=$cfg_dir_rootfs/var/empty \
        --disable-strip
        
 }
--- a/rules/perf/default.bash
+++ b/rules/perf/default.bash
@ -1,46 +0,0 @@
-version=\
-(
-    "3.19"
-)
-
-url=\
-(
-       "https://www.kernel.org/pub/linux/kernel/v3.x/linux-$version.tar.xz"
-)
-
-requires=\
-(
-    'flex/host'
-    'bison/host'
-    'zlib/default'
-)
-
-# v3.19
-md5=\
-(
-       'd3fc8316d4d4d04b65cbc2d70799e763'
-)
-
-#3.14.63
-# md5=('6cf8a6b23849f47f511e0e46cfdb6392')
-
-build()
-{
-    
-    cd ../linux-$version/
-    $cmd_make \
-	CROSS_COMPILE="$cfg_target_canonical-" \
-	ARCH="$cfg_target_linux" \
-	INSTALL_MOD_PATH="$cfg_dir_rootfs/usr" \
-	KBUILD_VERBOSE=1 \
-	DEPMOD="$cfg_dir_toolchain/sbin/depmod" \
-	NO_LIBELF=1 \
-	LDFLAGS=-static \
-	-C "./tools/perf/"
-}
-
-target_install()
-{
-    $cmd_cp ../linux-$version/tools/perf/perf \
-	    $cfg_dir_rootfs/usr/bin/
-}
--- a/rules/raspicam/default.bash
+++ b/rules/raspicam/default.bash
@ -1,60 +0,0 @@
-version=\
-(
-    "1.0.0"
-)
-
-url=\
-(
-    "http://lsts.pt/glued/raspicam-$version.zip"
-)
-
-md5=\
-(
-  "169e62fd17d41455a42711a2f9c54fd1"
-)
-
-maintainer=\
-(
-    'Pedro Gonçalves <pedro@lsts.pt>'
-)
-
-requires=\
-(
-    'uv4l/default'
-    'cmake/host'
-)
-
-configure()
-{
-    LINKER_ADDED_FLAGS="-Wl,-rpath,${cfg_dir_rootfs}/usr/lib"
-
-    ${cfg_dir_toolchain}/usr/local/bin/cmake \
-        -DCMAKE_SYSTEM_NAME="Linux" \
-        -DCMAKE_SYSTEM_VERSION="1" \
-        -DCMAKE_FIND_ROOT_PATH="${cfg_dir_toolchain_sysroot}/usr ${cfg_dir_rootfs}/usr" \
-        -DCMAKE_FIND_ROOT_PATH_MODE_INCLUDE=ONLY \
-        -DCMAKE_FIND_ROOT_PATH_MODE_LIBRARY=ONLY \
-        -DCMAKE_C_COMPILER="${cmd_target_cc}" \
-        -DCMAKE_CXX_COMPILER="${cmd_target_cxx}" \
-        -DCMAKE_C_FLAGS="${cfg_target_gcc_flags}" \
-	.
-}
-
-build()
-{
-    $cmd_make VERBOSE=1
-}
-
-host_install()
-{
-    cd build/
-    $cmd_cp -r "lib/"* "$cfg_dir_toolchain_sysroot/usr/lib/"
-    $cmd_cp -r "inc/"* "$cfg_dir_toolchain_sysroot/usr/include/"
-}
-
-target_install()
-{
-    cd build/
-    $cmd_cp -r "lib/"* "$cfg_dir_rootfs/usr/lib/"
-    $cmd_cp -r "bin/"* "$cfg_dir_rootfs/usr/bin/"
-}
--- a/rules/rpi-boot-firmware/default.bash
+++ b/rules/rpi-boot-firmware/default.bash
@ -1,29 +1,31 @@
 version=\
 (
-    '2017-02-02'
+    '2015-06-03'
 )

 url=\
 (
-    "http://lsts.pt/glued/rpi-boot-firmware-$version.zip"
+    "https://github.com/rasmartins/rpi-boot-firmware/archive/rpi-boot-firmware-$version.tar.gz"
 )

 maintainer=\
 (
    'Ricardo Martins <rasm@fe.up.pt>'
-    'Pedro Gonçalves <pedro@lsts.pt>'
 )

 md5=\
 (
-    'eb42664fce4d73f167064e697dfacb76'
+    'a80ee36b66cccda4e9ccb7eb26bd6bb8'
 )

 target_install()
 {
-    $cmd_mkdir "$cfg_dir_rootfs/boot"
+    $cmd_mkdir \
+        "$cfg_dir_rootfs/boot" &&

-    $cmd_cp "../$pkg-$version/"* "$cfg_dir_rootfs/boot/"
+    for f in bootcode.bin fixup.dat start.elf; do
+        $cmd_cp -r "../$pkg-$pkg-$version/$f" "$cfg_dir_rootfs/boot"
+    done &&

    tar -C "$pkg_dir/fs" -c -f - . | tar -C "$cfg_dir_rootfs" -x -v -f -
 }
--- a/rules/rpi-boot-firmware/fs/boot/cmdline.txt
+++ b/rules/rpi-boot-firmware/fs/boot/cmdline.txt
@ -1 +1 @@
-dwc_otg.lpm_enable=0 console=tty1 root=/dev/mmcblk0p2 elevator=deadline rootwait quiet
+dwc_otg.lpm_enable=0 console=ttyAMA0,115200,8n1 root=/dev/mmcblk0p2 elevator=deadline rootwait quiet
--- a/rules/syslinux/extlinux.conf
+++ b/rules/syslinux/extlinux.conf
@ -1,6 +1,3 @@
 LABEL linux
   KERNEL /boot/kernel
   APPEND rootwait root=$cfg_kernel_boot_dev rootfstype=ext2 ro $cfg_kernel_extra_args
-
-LABEL memtest
-   LINUX /boot/memtest.bin
--- a/rules/uv4l/default.bash
+++ b/rules/uv4l/default.bash
@ -1,41 +0,0 @@
-version=\
-(
-  "1.0.0"
-)
-
-url=\
-(
-  "http://lsts.pt/glued/uv4l.$version.tar.bz2"
-)
-
-md5=\
-(
-  "869e884accbfa9c2356e2fd9307dd71c"
-)
-
-maintainer=\
-(
-    'Pedro Gonçalves <pedro@lsts.pt>'
-)
-
-post_unpack()
-{
-    mv "../etc" "../uv4l-$version/"
-    mv "../usr" "../uv4l-$version/"
-}
-
-host_install()
-{
-  $cmd_cp -r "usr/lib/"*    "$cfg_dir_toolchain_sysroot/usr/lib/"
-  $cmd_cp -r "usr/include/"* "$cfg_dir_toolchain_sysroot/usr/include/"
-}
-
-target_install()
-{
-    $cmd_cp -r "usr/lib/"* "$cfg_dir_rootfs/usr/lib/"
-    $cmd_cp -r "usr/bin/"* "$cfg_dir_rootfs/usr/bin/"
-
-    tar -C "$pkg_dir/fs" -c -f - . | tar -C "$cfg_dir_rootfs" -x -v -f -
-}
-
-
--- a/rules/uv4l/fs/etc/rc.d/raspicam
+++ b/rules/uv4l/fs/etc/rc.d/raspicam
@ -1,28 +0,0 @@
-start()
-{
-    killall uv4l
-    modprobe cuse &&
-	uv4l \
-	    -nopreview \
-	    --auto-video_nr \
-	    --driver raspicam \
-	    --encoding h264 \
-	    --width 1080 \
-	    --height 720 \
-	    --framerate 20 \
-	    --quality 10 \
-	    --server-option \
-	    --port=9090 \
-	    --server-option \
-	    --max-queued-connections=30 \
-	    --server-option \
-	    --max-streams=25 \
-	    --server-option \
-	    --max-threads=29
-}
-
-stop()
-{
-    killall uv4l
-    rmmod uv4l
-}
--- a/rules/zeromq/default.bash
+++ b/rules/zeromq/default.bash
@ -1,46 +0,0 @@
-version=\
-(
-    "4.1.3"
-)
-
-url=\
-(
-    "http://download.zeromq.org/zeromq-$version.tar.gz"
-)
-
-md5=\
-(
-    "d0824317348cfb44b8692e19cc73dc3a"
-)
-
-configure()
-{
-    ./configure \
-        --prefix="${cfg_dir_toolchain_sysroot}/usr" \
-        --target="$cfg_target_canonical" \
-        --host="$cfg_target_canonical" \
-        --build="$cfg_host_canonical" \
-        --without-libsodium
-}
-
-build()
-{
-    $cmd_make
-}
-
-host_install()
-{
-    $cmd_make install
-}
-
-target_install()
-{
-  # Libs:
-  for f in "$cfg_dir_toolchain_sysroot/usr/lib/"libzmq.*; do
-    if [ -L "$f" ]; then
-      $cmd_cp "$f" "$cfg_dir_rootfs/usr/lib"
-    else
-      $cmd_target_strip -v "$f" -o "$cfg_dir_rootfs/usr/lib/$(basename "$f")"
-    fi
-  done
-}
--- a/rules/zerotier/default.bash
+++ b/rules/zerotier/default.bash
@ -1,34 +0,0 @@
-version=\
-(
-    '1.4.2'
-)
-
-url=\
-(
-    "https://github.com/zerotier/ZeroTierOne/archive/$version.tar.gz"
-)
-
-md5=\
-(
-    'c173f8b61bcdb23844a2669ff0d7bdf0'
-)
-
-build()
-{
-    cd ../ZeroTierOne-$version && $cmd_make \
-                VERBOSE=1 \
-                CC="$cmd_target_cc" \
-                CXX="$cmd_target_cxx" \
-		        LD="$cmd_target_ld" \
-                STRIP="$cmd_target_strip" \
-                CC_FLAGS="$cfg_target_gcc_flags"
-
-}
-
-target_install()
-{
-    $cmd_cp "../ZeroTierOne-$version/zerotier-one" "$cfg_dir_rootfs/usr/bin/zerotier-one"
-    ln -sf "$cfg_dir_rootfs/usr/bin/zerotier-one" "$cfg_dir_rootfs/usr/bin/zerotier-cli"
-    ln -sf "$cfg_dir_rootfs/usr/bin/zerotier-one" "$cfg_dir_rootfs/usr/bin/zerotier-idtool"
-}
-
--- a/systems/lauv-aux-rpi/cfg/linux-3.18_2015-06-03.cfg
+++ b/systems/lauv-aux-rpi/cfg/linux-3.18_2015-06-03.cfg
--- a/systems/lauv-aux-rpi/cfg/linux-4.4_2017-01-27.cfg
+++ b/systems/lauv-aux-rpi/cfg/linux-4.4_2017-01-27.cfg
--- a/systems/lauv-aux-rpi/config
+++ b/systems/lauv-aux-rpi/config
@ -6,12 +6,13 @@ cfg_services1='lauv-storage-server'
 cfg_services2='dune'
 cfg_packages='dropbear rsync busybox e2fsprogs dosfstools ptpd rpcbind nfs-utils rpi-boot-firmware linux/rpi'
 cfg_target_linux_kernel='arch/arm/boot/zImage'
+cfg_target_linux_dtb='arch/arm/boot/dts/bcm2709-rpi-2-b.dtb'
 cfg_ptpd_interface='eth0'
 cfg_terminal='ttyAMA0'
 cfg_lauv_storage_dir='/opt/lsts/dune/log'
 cfg_partitions=\
 (
-    rpi-boot BOOT0  512B    32MiB
+    rpi-boot boot0  512B    32MiB
    root     root0  32MiB   544MiB
    data     data0  544MiB  -1
 )
--- a/systems/lauv-aux-rpi/fs/boot/config.txt
+++ b/systems/lauv-aux-rpi/fs/boot/config.txt
@ -1,9 +1 @@
-# Core.
 arm_freq=1000
-
-# Disable BT on Rpi3.
-dtoverlay=pi3-disable-bt
-
-# Enable RasPicam
-start_x=1
-gpu_mem=128
--- a/systems/lauv-aux-rpi/lauv-aux-rpi-testbed.cfg
+++ b/systems/lauv-aux-rpi/lauv-aux-rpi-testbed.cfg
@ -3,4 +3,3 @@ cfg_eth_ext_ip='10.0.200.24'
 cfg_eth_ext_mk='255.255.0.0'
 cfg_eth_ext_gw='10.0.0.1'
 cfg_ptpd_interface='eth0'
-cfg_services1=''
--- a/systems/lauv-aux-rpi/lauv-blue.cfg
+++ b/systems/lauv-aux-rpi/lauv-blue.cfg
@ -1,6 +0,0 @@
-cfg_hostname='lauv-blue'
-cfg_eth_ext_ip='10.0.2.55'
-cfg_eth_ext_mk='255.255.0.0'
-cfg_eth_ext_gw='10.0.0.1'
-cfg_ptpd_interface='eth0'
-cfg_services1=''
--- a/systems/lauv-aux-rpi/lauv-nemo-1-aux.cfg
+++ b/systems/lauv-aux-rpi/lauv-nemo-1-aux.cfg
@ -1,3 +0,0 @@
-cfg_hostname='lauv-nemo-1-aux'
-cfg_eth_ext_ip='10.0.10.63'
-cfg_packages="$cfg_packages boost"
--- a/systems/lauv-aux-rpi/lauv-xplore-1-aux.cfg
+++ b/systems/lauv-aux-rpi/lauv-xplore-1-aux.cfg
@ -6,5 +6,5 @@ cfg_ptpd_interface='eth0'
 cfg_services0='network dropbear storage upgrade syslog ptpd'
 cfg_services1=''
 cfg_services2='trex'
-cfg_packages='dropbear rsync busybox e2fsprogs dosfstools ptpd rpcbind nfs-utils rpi-boot-firmware linux/rpi libantlr3c boost'
+cfg_packages='dropbear rsync busybox e2fsprogs dosfstools ptpd rpcbind nfs-utils rpi-boot-firmware linux/rpi libantlr3c boost europa'

--- a/systems/lauv-aux-rpi/lauv-xplore-2-aux.cfg
+++ b/systems/lauv-aux-rpi/lauv-xplore-2-aux.cfg
@ -6,5 +6,5 @@ cfg_ptpd_interface='eth0'
 cfg_services0='network dropbear storage upgrade syslog ptpd'
 cfg_services1=''
 cfg_services2='trex'
-cfg_packages='dropbear rsync busybox e2fsprogs dosfstools ptpd rpcbind nfs-utils rpi-boot-firmware linux/rpi libantlr3c boost'
+cfg_packages='dropbear rsync busybox e2fsprogs dosfstools ptpd rpcbind nfs-utils rpi-boot-firmware linux/rpi libantlr3c boost europa'

--- a/systems/lauv-aux-rpi/lauv-xplore-3-aux.cfg
+++ b/systems/lauv-aux-rpi/lauv-xplore-3-aux.cfg
@ -1,10 +0,0 @@
-cfg_hostname='lauv-xplore-3-aux'
-cfg_eth_ext_ip='10.0.10.143'
-cfg_eth_ext_mk='255.255.0.0'
-cfg_eth_ext_gw='10.0.0.1'
-cfg_ptpd_interface='eth0'
-cfg_services0='network dropbear storage upgrade syslog ptpd'
-cfg_services1=''
-cfg_services2='trex'
-cfg_packages='dropbear rsync busybox e2fsprogs dosfstools ptpd rpcbind nfs-utils rpi-boot-firmware linux/rpi libantlr3c boost'
-
--- a/systems/lauv-aux-rpi/lauv-xplore-4-aux.cfg
+++ b/systems/lauv-aux-rpi/lauv-xplore-4-aux.cfg
@ -1,10 +0,0 @@
-cfg_hostname='lauv-xplore-4-aux'
-cfg_eth_ext_ip='10.0.10.153'
-cfg_eth_ext_mk='255.255.0.0'
-cfg_eth_ext_gw='10.0.0.1'
-cfg_ptpd_interface='eth0'
-cfg_services0='network dropbear storage upgrade syslog ptpd'
-cfg_services1=''
-cfg_services2='trex'
-cfg_packages='dropbear rsync busybox e2fsprogs dosfstools ptpd rpcbind nfs-utils rpi-boot-firmware linux/rpi libantlr3c boost'
-
--- a/systems/lauv-aux-rpi/lauv-xplore-5-aux.cfg
+++ b/systems/lauv-aux-rpi/lauv-xplore-5-aux.cfg
@ -1,10 +0,0 @@
-cfg_hostname='lauv-xplore-5-aux'
-cfg_eth_ext_ip='10.0.10.163'
-cfg_eth_ext_mk='255.255.0.0'
-cfg_eth_ext_gw='10.0.0.1'
-cfg_ptpd_interface='eth0'
-cfg_services0='network dropbear storage upgrade syslog ptpd'
-cfg_services1=''
-cfg_services2='trex'
-cfg_packages='dropbear rsync busybox e2fsprogs dosfstools ptpd rpcbind nfs-utils rpi-boot-firmware linux/rpi libantlr3c boost'
-
--- a/systems/lauv-aux-rpi/lauv-xtreme-2-aux.cfg
+++ b/systems/lauv-aux-rpi/lauv-xtreme-2-aux.cfg
@ -3,3 +3,4 @@ cfg_eth_ext_ip='10.0.10.53'
 cfg_eth_ext_mk='255.255.0.0'
 cfg_eth_ext_gw='10.0.0.1'
 cfg_ptpd_interface='eth0'
+cfg_lauv_storage='internal'
--- a/systems/lctr-a6xx/buv-petinga-1.cfg
+++ b/systems/lctr-a6xx/buv-petinga-1.cfg
@ -1,2 +0,0 @@
-cfg_hostname='buv-petinga-1'
-cfg_eth_ext_ip='10.0.10.170'
--- a/systems/lctr-a6xx/config
+++ b/systems/lctr-a6xx/config
@ -4,7 +4,7 @@ cfg_services0='dropbear network storage upgrade syslog escc ptpd setserial'
 cfg_services1=''
 cfg_services2='dune'
 cfg_modules=''
-cfg_packages='coreboot-lsts emm-8p-xt-eeprom zlib dropbear rsync busybox flashrom e2fsprogs socat linux escc syslinux syslinux/host ptpd ntp uswitch pciutils bzip2 memtest86+'
+cfg_packages='coreboot-lsts emm-8p-xt-eeprom zlib dropbear rsync busybox flashrom e2fsprogs socat linux escc syslinux syslinux/host ptpd ntp uswitch pciutils bzip2'
 cfg_terminal='ttyS0'
 cfg_target_linux_kernel='arch/x86/boot/bzImage'
 cfg_ptpd_master='true'
--- a/systems/lctr-a6xx/geode-testbed.cfg
+++ b/systems/lctr-a6xx/geode-testbed.cfg
@ -1,2 +0,0 @@
-cfg_hostname='geode-testbed'
-cfg_eth_ext_ip='10.0.200.64'
--- a/systems/lctr-a6xx/lauv-nemo-1.cfg
+++ b/systems/lctr-a6xx/lauv-nemo-1.cfg
@ -1,2 +0,0 @@
-cfg_hostname='lauv-nemo-1'
-cfg_eth_ext_ip='10.0.10.60'
--- a/systems/lctr-a6xx/lauv-xplore-3.cfg
+++ b/systems/lctr-a6xx/lauv-xplore-3.cfg
@ -1,2 +0,0 @@
-cfg_hostname='lauv-xplore-3'
-cfg_eth_ext_ip='10.0.10.140'
--- a/systems/lctr-a6xx/lauv-xplore-4.cfg
+++ b/systems/lctr-a6xx/lauv-xplore-4.cfg
@ -1,2 +0,0 @@
-cfg_hostname='lauv-xplore-4'
-cfg_eth_ext_ip='10.0.10.150'
--- a/systems/lctr-a6xx/lauv-xplore-5.cfg
+++ b/systems/lctr-a6xx/lauv-xplore-5.cfg
@ -1,2 +0,0 @@
-cfg_hostname='lauv-xplore-5'
-cfg_eth_ext_ip='10.0.10.160'
--- a/systems/lctr-a6xx/patches/linux/4.4.66/00-aim104-com8.patch
+++ b/systems/lctr-a6xx/patches/linux/4.4.66/00-aim104-com8.patch
@ -1,85 +0,0 @@
-diff -Nru a/drivers/tty/serial/8250/8250_aim104_com8.c b/drivers/tty/serial/8250/8250_aim104_com8.c
--- a/drivers/tty/serial/8250/8250_aim104_com8.c
-+++ b/drivers/tty/serial/8250/8250_aim104_com8.c
-@@ -0,0 +1,51 @@
-+#include <linux/module.h>
-+#include <linux/init.h>
-+#include <linux/serial_8250.h>
-+
-+#define PORT(_base,_irq)				\
-+	{						\
-+		.iobase		= _base,		\
-+		.irq		= _irq,			\
-+		.uartclk	= 1843200,		\
-+		.iotype		= UPIO_PORT,		\
-+		.flags		= UPF_BOOT_AUTOCONF | UPF_BUGGY_UART,	\
-+	}
-+
-+static struct plat_serial8250_port aim104_data[] = {
-+	PORT(0x100, 10),
-+	PORT(0x108, 10),
-+	PORT(0x110, 10),
-+	PORT(0x118, 10),
-+	PORT(0x120, 10),
-+	PORT(0x128, 10),
-+	PORT(0x130, 10),
-+	PORT(0x138, 10),
-+	PORT(0x300, 6),
-+	PORT(0x308, 6),
-+	PORT(0x310, 6),
-+	PORT(0x318, 6),
-+	PORT(0x320, 6),
-+	PORT(0x328, 6),
-+	PORT(0x330, 6),
-+	PORT(0x338, 6),
-+	{ },
-+};
-+
-+static struct platform_device exar_device = {
-+	.name			= "serial8250",
-+	.id			= PLAT8250_DEV_PLATFORM,
-+	.dev			= {
-+		.platform_data	= aim104_data,
-+	},
-+};
-+
-+static int __init exar_init(void)
-+{
-+	return platform_device_register(&exar_device);
-+}
-+
-+module_init(exar_init);
-+
-+MODULE_AUTHOR("Ricardo Martins");
-+MODULE_DESCRIPTION("8250 serial probe module for Eurotech AIM104-COM8");
-+MODULE_LICENSE("GPL");
-diff -Nru a/drivers/tty/serial/8250/Kconfig b/drivers/tty/serial/8250/Kconfig
--- a/drivers/tty/serial/8250/Kconfig
-+++ b/drivers/tty/serial/8250/Kconfig
-@@ -225,6 +225,15 @@ config SERIAL_8250_EXAR_ST16C554
- 	  To compile this driver as a module, choose M here: the module
- 	  will be called 8250_exar_st16c554.
-
-+config SERIAL_8250_AIM104_COM8
-+	tristate "Support Eurotech AIM104-COM8 Dual Quad UART"
-+	depends on SERIAL_8250 != n && ISA && SERIAL_8250_MANY_PORTS
-+	help
-+	  Eurotech AIM104-COM8 Dual Quad UART.
-+
-+	  To compile this driver as a module, choose M here: the module
-+	  will be called 8250_aim104_com8.
-+
- config SERIAL_8250_HUB6
- 	tristate "Support Hub6 cards"
- 	depends on SERIAL_8250 != n && ISA && SERIAL_8250_MANY_PORTS
-diff -Nru a/drivers/tty/serial/8250/Makefile b/drivers/tty/serial/8250/Makefile
--- a/drivers/tty/serial/8250/Makefile
-+++ b/drivers/tty/serial/8250/Makefile
-@@ -17,6 +17,7 @@ obj-$(CONFIG_SERIAL_8250_FOURPORT)	+= 8250_fourport.o
- obj-$(CONFIG_SERIAL_8250_ACCENT)	+= 8250_accent.o
- obj-$(CONFIG_SERIAL_8250_BOCA)		+= 8250_boca.o
- obj-$(CONFIG_SERIAL_8250_EXAR_ST16C554)	+= 8250_exar_st16c554.o
-+obj-$(CONFIG_SERIAL_8250_AIM104_COM8)	+= 8250_aim104_com8.o
- obj-$(CONFIG_SERIAL_8250_HUB6)		+= 8250_hub6.o
- obj-$(CONFIG_SERIAL_8250_MCA)		+= 8250_mca.o
- obj-$(CONFIG_SERIAL_8250_FSL)		+= 8250_fsl.o
--- a/systems/lctr-a6xx/patches/linux/4.4.66/90-st16654-fifo-trigger-16.patch
+++ b/systems/lctr-a6xx/patches/linux/4.4.66/90-st16654-fifo-trigger-16.patch
@ -1,14 +0,0 @@
-diff --git a/drivers/tty/serial/8250/8250_port.c b/drivers/tty/serial/8250/8250_port.c
-index 52d82d2..613c7e9 100644
--- a/drivers/tty/serial/8250/8250_port.c
-+++ b/drivers/tty/serial/8250/8250_port.c
-@@ -132,8 +132,7 @@ static const struct serial8250_config uart_config[] = {
- 		.name		= "ST16654",
- 		.fifo_size	= 64,
- 		.tx_loadsz	= 32,
-		.fcr		= UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_01 |
-				  UART_FCR_T_TRIG_10,
-+		.fcr		= UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_00,
- 		.rxtrig_bytes	= {8, 16, 56, 60},
- 		.flags		= UART_CAP_FIFO | UART_CAP_EFR | UART_CAP_SLEEP,
- 	},
--- a/systems/lctr-a72xx/cfg/firmware/config.txt
+++ b/systems/lctr-a72xx/cfg/firmware/config.txt
@ -1,51 +0,0 @@
-# For more options and information see 
-# http://www.raspberrypi.org/documentation/configuration/config-txt.md
-# Some settings may impact device functionality. See link above for details
-
-kernel=uboot.bin
-device_tree_address=0x02000000
-
-# enable i2c
-dtparam=i2c_arm=on
-dtparam=spi=on
-
-# uncomment if you get no picture on HDMI for a default "safe" mode
-#hdmi_safe=1
-
-# uncomment this if your display has a black border of unused pixels visible
-# and your display can output without overscan
-#disable_overscan=1
-
-# uncomment the following to adjust overscan. Use positive numbers if console
-# goes off screen, and negative if there is too much border
-#overscan_left=16
-#overscan_right=16
-#overscan_top=16
-#overscan_bottom=16
-
-# uncomment to force a console size. By default it will be display's size minus
-# overscan.
-#framebuffer_width=1280
-#framebuffer_height=720
-
-# uncomment if hdmi display is not detected and composite is being output
-#hdmi_force_hotplug=1
-
-# uncomment to force a specific HDMI mode (this will force VGA)
-#hdmi_group=1
-#hdmi_mode=1
-
-# uncomment to force a HDMI mode rather than DVI. This can make audio work in
-# DMT (computer monitor) modes
-#hdmi_drive=2
-
-# uncomment to increase signal to HDMI, if you have interference, blanking, or
-# no display
-#config_hdmi_boost=4
-
-# uncomment for composite PAL
-#sdtv_mode=2
-
-#uncomment to overclock the arm. 700 MHz is the default.
-#arm_freq=800
-
--- a/systems/lctr-a72xx/cfg/linux-5.4.cfg
+++ b/systems/lctr-a72xx/cfg/linux-5.4.cfg
--- a/systems/lctr-a72xx/config
+++ b/systems/lctr-a72xx/config
@ -1,19 +0,0 @@
-cfg_architecture='cortex-a72'
-cfg_storage='data0:ext4:/opt'
-cfg_services0='dropbear network storage upgrade syslog ptpd'
-cfg_services1=''
-cfg_services2='dune'
-cfg_modules=''
-cfg_packages='dropbear rsync busybox e2fsprogs dosfstools ptpd rpcbind rpi-boot-firmware bison binutils openssl linux/rpi exiftool libusb'
-cfg_target_linux_kernel='arch/arm/boot/zImage'
-cfg_ptpd_interface='eth0'
-cfg_eth_ext_mk='255.255.0.0'
-cfg_eth_ext_gw='10.0.0.1'
-cfg_terminal='tty1'
-cfg_partitions=\
-(
-    rpi-boot BOOT0  512B    32MiB
-    root     root0  32MiB   544MiB
-    data     data0  544MiB  -1
-)
-
--- a/systems/lctr-a72xx/lctr-a72xx-testbed.cfg
+++ b/systems/lctr-a72xx/lctr-a72xx-testbed.cfg
@ -1,3 +0,0 @@
-cfg_hostname="lctr-a72xx-testbed"
-cfg_eth_ext_ip="10.0.200.18"
-cfg_kernel_boot_dev='/dev/mmcblk0p1'
--- a/systems/lctr-a9xx/config
+++ b/systems/lctr-a9xx/config
@ -4,7 +4,7 @@ cfg_modules=''
 cfg_services0='dropbear network storage upgrade syslog'
 cfg_services1='huawei ntpd'
 cfg_services2='dune'
-cfg_packages='u-boot dropbear rsync busybox linux/v3_14 uswitch ppp iptables socat bridge-utils ntp e2fsprogs i2c-tools iperf dnsmasq'
+cfg_packages='u-boot dropbear rsync busybox linux uswitch ppp iptables socat bridge-utils ntp e2fsprogs i2c-tools iperf dnsmasq'
 cfg_target_linux_kernel='arch/arm/boot/zImage'
 cfg_target_linux_dtb='arch/arm/boot/dts/omap3-lctr-a9xx.dtb'
 cfg_target_uboot_config='igep0020'
--- a/systems/lctr-a9xx/manta-rugged-2.cfg
+++ b/systems/lctr-a9xx/manta-rugged-2.cfg
@ -1,2 +0,0 @@
-cfg_hostname='manta-rugged-2'
-cfg_eth_ext_ip='10.0.30.25'
--- a/systems/lctr-a9xx/manta-sabuvis.cfg
+++ b/systems/lctr-a9xx/manta-sabuvis.cfg
@ -1,2 +0,0 @@
-cfg_hostname='manta-sabuvis'
-cfg_eth_ext_ip='10.0.30.26'
--- a/systems/lctr-a9xx/patches/linux/4.4.66/00-lctr-a9xx-dts.patch
+++ b/systems/lctr-a9xx/patches/linux/4.4.66/00-lctr-a9xx-dts.patch
@ -1,105 +0,0 @@
-diff --git linux-4.4.66/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
-index 30bbc37..7241be6 100644
--- linux-4.4.66/arch/arm/boot/dts/Makefile
-+++ linux-4.4.66/arch/arm/boot/dts/Makefile
-@@ -421,6 +421,7 @@
-	omap3-igep0020-rev-f.dtb \
-	omap3-igep0030.dtb \
-	omap3-igep0030-rev-g.dtb \
-+	omap3-lctr-a9xx.dtb \
-	omap3-ldp.dtb \
-	omap3-lilly-dbb056.dtb \
-	omap3-n900.dtb \
-diff -Nru linux-4.4.66/arch/arm/boot/dts/omap3-lctr-a9xx.dts linux-4.4.66.rasm/arch/arm/boot/dts/omap3-lctr-a9xx.dts
--- linux-4.4.66/arch/arm/boot/dts/omap3-lctr-a9xx.dts
-+++ linux-4.4.66.rasm/arch/arm/boot/dts/omap3-lctr-a9xx.dts
-@@ -0,0 +1,89 @@
-+/*
-+ * Copyright (C) 2014 Universidade do Porto - Faculdade de Engenharia
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.
-+ */
-+
-+#include <dt-bindings/input/input.h>
-+#include "omap3-igep0020.dts"
-+
-+/ {
-+	leds {
-+		boot {
-+			linux,default-trigger = "heartbeat";
-+		};
-+	};
-+
-+	gpio_keys {
-+		pinctrl-names = "default";
-+		pinctrl-0 = <&gpio_keys_pins>;
-+		compatible = "gpio-keys";
-+
-+		button@0 {
-+			label = "Button 0";
-+			gpios = <&gpio5 11 GPIO_ACTIVE_HIGH>;	/* gpio_139 */
-+			linux,code = <BTN_0>;
-+			debounce-interval = <5>;
-+		};
-+
-+		button@1 {
-+			label = "Button 1";
-+			gpios = <&gpio5 10 GPIO_ACTIVE_HIGH>;	/* gpio_138 */
-+			linux,code = <BTN_1>;
-+			debounce-interval = <5>;
-+		};
-+
-+		button@2 {
-+			label = "Button 2";
-+			gpios = <&gpio5 9 GPIO_ACTIVE_HIGH>;	/* gpio_137 */
-+			linux,code = <BTN_2>;
-+			debounce-interval = <5>;
-+		};
-+	};
-+
-+	pps {
-+		compatible = "pps-gpio";
-+		pinctrl-names = "default";
-+		pinctrl-0 = <&pps_pins>;
-+		gpios = <&gpio5 8 GPIO_ACTIVE_HIGH>;
-+		assert-rising-edge;
-+	};
-+};
-+
-+&omap3_pmx_core {
-+	gpio_keys_pins: pinmux_gpio_keys_pins {
-+		pinctrl-single,pins = <
-+			0x136 (PIN_INPUT_PULLDOWN | MUX_MODE4)	/* gpio_137 - button 2 */
-+			0x138 (PIN_INPUT_PULLDOWN | MUX_MODE4)	/* gpio_138 - button 1 */
-+			0x13a (PIN_INPUT_PULLDOWN | MUX_MODE4)	/* gpio_139 - button 0 */
-+		>;
-+	};
-+
-+	pps_pins: pinmux_pps_pins {
-+		pinctrl-single,pins = <
-+			0x134 (PIN_INPUT_PULLDOWN | MUX_MODE4)	/* gpio_136 */
-+		>;
-+	};
-+};
-+
-+&i2c2 {
-+	rtc@68 {
-+		compatible = "dallas,ds1307";
-+		reg = <0x68>;
-+	};
-+};
-+
-+/* Disable WiFi/Bluetooth combo. */
-+&mmc2 {
-+	status = "disabled";
-+};
-+
-+&vdd33 {
-+	status = "disabled";
-+};
-+
-+&lbee1usjyc_pdn {
-+	status = "disabled";
-+};
--- a/systems/lctr-a9xx/x8-02.cfg
+++ b/systems/lctr-a9xx/x8-02.cfg
@ -1,3 +1,3 @@
 cfg_hostname='x8-02'
 cfg_eth_ext_ip='10.0.20.100'
-cfg_packages='u-boot dropbear rsync busybox linux/v3_14 uswitch ppp iptables socat bridge-utils ntp e2fsprogs i2c-tools iperf dnsmasq libav'
+cfg_packages='u-boot dropbear rsync busybox linux uswitch ppp iptables socat bridge-utils ntp e2fsprogs i2c-tools iperf dnsmasq libav'
--- a/systems/lctr-b2xx/cfg/linux-3.14.63.cfg
+++ b/systems/lctr-b2xx/cfg/linux-3.14.63.cfg
--- a/systems/lctr-b2xx/lauv-noptilus-1-aux.cfg
+++ b/systems/lctr-b2xx/lauv-noptilus-1-aux.cfg
@ -4,4 +4,4 @@ cfg_eth_ext_ip='10.0.10.83'
 cfg_eth_ext_mk='255.255.0.0'
 cfg_eth_ext_gw='10.0.0.1'
 cfg_ptpd_interface='eth0'
-cfg_packages="$cfg_packages boost jansson czmq zeromq"
+cfg_packages="$cfg_packages ptpd rpcbind nfs-utils libantlr3c boost europa"
--- a/systems/lctr-b2xx/lauv-noptilus-2-aux.cfg
+++ b/systems/lctr-b2xx/lauv-noptilus-2-aux.cfg
@ -4,4 +4,4 @@ cfg_eth_ext_ip='10.0.10.93'
 cfg_eth_ext_mk='255.255.0.0'
 cfg_eth_ext_gw='10.0.0.1'
 cfg_ptpd_interface='eth0'
-cfg_packages="$cfg_packages boost jansson czmq zeromq"
+cfg_packages="$cfg_packages ptpd rpcbind nfs-utils libantlr3c boost europa"
--- a/systems/lctr-b2xx/lauv-noptilus-3-aux.cfg
+++ b/systems/lctr-b2xx/lauv-noptilus-3-aux.cfg
@ -4,4 +4,5 @@ cfg_eth_ext_ip='10.0.10.103'
 cfg_eth_ext_mk='255.255.0.0'
 cfg_eth_ext_gw='10.0.0.1'
 cfg_ptpd_interface='eth0'
-cfg_packages="$cfg_packages boost jansson czmq zeromq"
+cfg_packages="$cfg_packages ptpd rpcbind nfs-utils libantlr3c boost europa"
+
--- a/systems/lctr-b2xx/mariner-01.cfg
+++ b/systems/lctr-b2xx/mariner-01.cfg
@ -0,0 +1,6 @@
+cfg_hostname='mariner-01'
+cfg_storage='data0:ext4:/opt'
+cfg_eth_ext_ip='10.0.20.125'
+cfg_eth_ext_mk='255.255.0.0'
+cfg_eth_ext_gw='10.0.0.1'
+cfg_packages='u-boot dropbear rsync busybox e2fsprogs ptpd i2c-tools am33xx-cm3/host linux libav'
--- a/systems/lctr-b2xx/patches/linux/3.14.63/00-lctr-b2xx-dts.patch
+++ b/systems/lctr-b2xx/patches/linux/3.14.63/00-lctr-b2xx-dts.patch
@ -1,13 +1,14 @@
--- linux-4.4.66/arch/arm/boot/dts/Makefile	2017-09-25 13:07:10.353013618 +0100
-+++ linux-4.4.66.tsm/arch/arm/boot/dts/Makefile	2017-09-25 13:11:13.523693878 +0100
-@@ -463,6 +463,7 @@
- 	am335x-evm.dtb \
+diff -Nru linux-3.13.1/arch/arm/boot/dts/Makefile linux-3.13.1.rasm/arch/arm/boot/dts/Makefile
+--- linux-3.13.1/arch/arm/boot/dts/Makefile	2014-01-29 13:06:37.000000000 +0000
+++ linux-3.13.1.rasm/arch/arm/boot/dts/Makefile	2014-02-01 06:53:43.968486026 +0000
+@@ -198,6 +198,7 @@
 	am335x-evmsk.dtb \
- 	am335x-nano.dtb \
+ 	am335x-bone.dtb \
+ 	am335x-boneblack.dtb \
 +	am335x-lctr-b2xx.dtb \
- 	am335x-pepper.dtb \
- 	am335x-lxm.dtb \
- 	am335x-chiliboard.dtb \
+ 	am335x-nano.dtb \
+ 	am335x-base0033.dtb \
+ 	am3517-evm.dtb \
 diff -Nru linux-3.13.1/arch/arm/boot/dts/am335x-lctr-b2xx.dts linux-3.13.1.rasm/arch/arm/boot/dts/am335x-lctr-b2xx.dts
 --- linux-3.13.1/arch/arm/boot/dts/am335x-lctr-b2xx.dts	1970-01-01 01:00:00.000000000 +0100
 +++ linux-3.13.1.rasm/arch/arm/boot/dts/am335x-lctr-b2xx.dts	2014-02-01 06:51:48.273816483 +0000
--- a/systems/lctr-b2xx/patches/linux/3.14.63/0007-cpsw-search-for-phy.patch
+++ b/systems/lctr-b2xx/patches/linux/3.14.63/0007-cpsw-search-for-phy.patch
--- a/systems/lctr-b2xx/patches/linux/3.14.63/01-lctr-b2xx-dts.patch
+++ b/systems/lctr-b2xx/patches/linux/3.14.63/01-lctr-b2xx-dts.patch
--- a/systems/lctr-b2xx/x8-06.cfg
+++ b/systems/lctr-b2xx/x8-06.cfg
@ -3,4 +3,4 @@ cfg_storage='data0:ext4:/opt'
 cfg_eth_ext_ip='10.0.20.105'
 cfg_eth_ext_mk='255.255.0.0'
 cfg_eth_ext_gw='10.0.0.1'
-cfg_packages='u-boot dropbear rsync busybox e2fsprogs ptpd i2c-tools am33xx-cm3/host linux opencv exiv2 libav'
+cfg_packages='u-boot dropbear rsync busybox e2fsprogs ptpd i2c-tools am33xx-cm3/host linux libav'
--- a/systems/lctr-b2xx/x8-07.cfg
+++ b/systems/lctr-b2xx/x8-07.cfg
@ -3,5 +3,4 @@ cfg_storage='data0:ext4:/opt'
 cfg_eth_ext_ip='10.0.20.110'
 cfg_eth_ext_mk='255.255.0.0'
 cfg_eth_ext_gw='10.0.0.1'
-cfg_services1='huawei'
-cfg_packages='u-boot dropbear rsync busybox e2fsprogs ptpd i2c-tools uswitch ppp iptables am33xx-cm3/host linux opencv exiv2 libav'
+cfg_packages='u-boot dropbear rsync busybox e2fsprogs ptpd i2c-tools am33xx-cm3/host linux libav'
--- a/systems/lctr-rpi/cfg/linux-3.18_2015-06-03.cfg
+++ b/systems/lctr-rpi/cfg/linux-3.18_2015-06-03.cfg
--- a/systems/lctr-rpi/cfg/linux-4.4_2017-01-27.cfg
+++ b/systems/lctr-rpi/cfg/linux-4.4_2017-01-27.cfg
--- a/systems/lctr-rpi/config
+++ b/systems/lctr-rpi/config
@ -3,15 +3,16 @@ cfg_storage='data0:ext4:/opt'
 cfg_modules=''
 cfg_services0='network dropbear storage upgrade syslog ptpd'
 cfg_services2='dune'
-cfg_packages='dropbear rsync busybox e2fsprogs dosfstools ptpd rpcbind rpi-boot-firmware linux/rpi exiftool libusb'
+cfg_packages='dropbear rsync busybox e2fsprogs dosfstools ptpd rpcbind rpi-boot-firmware linux/rpi'
 cfg_target_linux_kernel='arch/arm/boot/zImage'
+cfg_target_linux_dtb='arch/arm/boot/dts/bcm2709-rpi-2-b.dtb'
 cfg_ptpd_interface='eth0'
 cfg_eth_ext_mk='255.255.0.0'
 cfg_eth_ext_gw='10.0.0.1'
-cfg_terminal='tty1'
+cfg_terminal='ttyAMA0'
 cfg_partitions=\
 (
-    rpi-boot BOOT0  512B    32MiB
+    rpi-boot boot0  512B    32MiB
    root     root0  32MiB   544MiB
    data     data0  544MiB  -1
 )
--- a/systems/lctr-rpi/fs/boot/config.txt
+++ b/systems/lctr-rpi/fs/boot/config.txt
@ -1,9 +1 @@
-# Core.
 arm_freq=1000
-
-# Disable BT on Rpi3.
-dtoverlay=pi3-disable-bt
-
-# Enable RasPicam
-start_x=1
-gpu_mem=128
--- a/systems/lctr-rpi/fs/etc/inittab
+++ b/systems/lctr-rpi/fs/etc/inittab
@ -1,4 +0,0 @@
-::sysinit:/sbin/services sysinit
-::restart:/sbin/init
-::respawn:-/usr/sbin/dropbear -F
-::shutdown:/sbin/services syshalt
--- a/systems/lctr-rpi/mariner-01.cfg
+++ b/systems/lctr-rpi/mariner-01.cfg
@ -1,6 +0,0 @@
-cfg_hostname='mariner-01'
-cfg_eth_ext_ip='10.0.20.125'
-cfg_packages="$cfg_packages opencv raspicam exiv2 libav iw"
-cfg_modules="$cfg_modules ftdi_sio rt73usb"
-cfg_services0='network-wlan dropbear storage upgrade syslog ptpd check_wlan'
-cfg_ptpd_interface='wlan0'
--- a/systems/lctr-rpi/nest-1.cfg
+++ b/systems/lctr-rpi/nest-1.cfg
@ -1,4 +1,4 @@
 cfg_hostname='nest-1'
-cfg_eth_ext_ip='10.0.35.1'
-cfg_services1='huawei'
+cfg_eth_ext_ip='10.0.200.40'
 cfg_packages="$cfg_packages ppp iptables"
+
--- a/systems/lctr-rpi/test-rpi-eth0.cfg
+++ b/systems/lctr-rpi/test-rpi-eth0.cfg
@ -1,9 +0,0 @@
-cfg_hostname='test-rpi'
-cfg_eth_ext_ip='10.0.200.52'
-cfg_services1=''
-cfg_packages='dropbear rsync busybox e2fsprogs dosfstools ptpd rpcbind rpi-boot-firmware linux/rpi exiftool libusb'
-cfg_services0='network dropbear storage upgrade syslog ptpd'
-cfg_modules="$cfg_modules ftdi_sio"
-cfg_terminal='tty1'
-cfg_ptpd_interface='eth0'
-
--- a/systems/lctr-rpi/test-rpi-wlan0.cfg
+++ b/systems/lctr-rpi/test-rpi-wlan0.cfg
@ -1,9 +0,0 @@
-cfg_hostname='test-rpi'
-cfg_eth_ext_ip='10.0.200.52'
-cfg_services1=''
-cfg_packages='dropbear rsync busybox e2fsprogs dosfstools ptpd rpcbind rpi-boot-firmware linux/rpi raspicam libjpeg-turbo v4l-utils uv4l iw'
-cfg_services0='network-wlan dropbear storage upgrade syslog ptpd check_wlan'
-cfg_modules="$cfg_modules ftdi_sio rt73usb"
-cfg_terminal='tty1'
-cfg_ptpd_interface='wlan0'
-
--- a/Show More
+++ b/Show More
Author	SHA1	Message	Date
Jose Pinto	fdc75d1e48	Added T-REX support to noptilus aux CPUs.	2017-06-06 11:43:21 +01:00
Jose Pinto	62265def46	Added T-REX to noptilus auxiliary cpus.	2017-06-06 08:52:21 +01:00