lctr-rpi: ignore lctr-rpi build folder

ntnu-b2xx: Complete transition from lctr-b2xx, move to hardfp

.gitignore

@@ -6,3 +6,8 @@
 /lctr-b1xx
 /lctr-b2xx
 /qemu-i686
+/lauv-aux
+/lauv-aux-rpi
+/ntnu-b2xx
+/stamp9g20
+/lctr-rpi

architectures/arm-1176.cfg

@@ -1,5 +1,6 @@
 cfg_target_canonical="armv11-$cfg_glued_vendor-linux-gnueabi"
 cfg_target_linux='arm'
+cfg_target_uboot_arch='arm'
 cfg_target_gcc_flags='-O2 -pipe -funit-at-a-time -mcpu=arm1176jzf-s -mtune=arm1176jzf-s -mfloat-abi=softfp -mfpu=vfpv3'
 cfg_target_gcc_configure_flags='--with-arch=armv7-a --with-cpu=arm1176jzf-s --with-tune=arm1176jzf-s --with-fpu=vfpv3 --with-float=softfp'
 cfg_target_ar_flags='elf32-littlearm'

architectures/arm926ej-s.cfg

@@ -0,0 +1,4 @@
+cfg_target_canonical="armv5te-$cfg_glued_vendor-linux-gnueabi"
+cfg_target_linux='arm'
+cfg_target_gcc_flags='-O2 -pipe -funit-at-a-time -mtune=arm926ej-s -mfloat-abi=soft'
+cfg_target_gcc_configure_flags='--with-arch=armv5te --with-tune=arm926ej-s --with-float=soft'

architectures/cortex-a8-hardfp.cfg

@@ -0,0 +1,6 @@
+cfg_target_canonical="armv7-$cfg_glued_vendor-linux-gnueabihf"
+cfg_target_linux='arm'
+cfg_target_uboot_arch='arm'
+cfg_target_gcc_flags='-O2 -pipe -funit-at-a-time -mcpu=cortex-a8 -mtune=cortex-a8 -mfloat-abi=hard -mfpu=vfpv3'
+cfg_target_gcc_configure_flags='--with-arch=armv7-a --with-cpu=cortex-a8 --with-tune=cortex-a8 --with-fpu=vfpv3 --with-float=hard'
+cfg_target_ar_flags='elf32-littlearm'

architectures/cortex-a8.cfg

@@ -1,6 +1,6 @@
 cfg_target_canonical="armv7-$cfg_glued_vendor-linux-gnueabi"
 cfg_target_linux='arm'
+cfg_target_uboot_arch='arm'
 cfg_target_gcc_flags='-O2 -pipe -funit-at-a-time -mcpu=cortex-a8 -mtune=cortex-a8 -mfloat-abi=softfp -mfpu=vfpv3'
 cfg_target_gcc_configure_flags='--with-arch=armv7-a --with-cpu=cortex-a8 --with-tune=cortex-a8 --with-fpu=vfpv3 --with-float=softfp'
 cfg_target_ar_flags='elf32-littlearm'
-cfg_target_uboot_arch='arm'

architectures/cortex-a9-hardfp.cfg

@@ -0,0 +1,6 @@
+cfg_target_canonical="armv7-$cfg_glued_vendor-linux-gnueabihf"
+cfg_target_linux='arm'
+cfg_target_uboot_arch='arm'
+cfg_target_gcc_flags='-O2 -pipe -funit-at-a-time -mcpu=cortex-a9 -mtune=cortex-a9 -mfloat-abi=hard -mfpu=vfpv3'
+cfg_target_gcc_configure_flags='--with-arch=armv7-a --with-cpu=cortex-a9 --with-tune=cortex-a9 --with-fpu=vfpv3 --with-float=hard'
+cfg_target_ar_flags='elf32-littlearm'

architectures/i586.cfg

@@ -2,4 +2,4 @@ cfg_target_canonical="i586-$cfg_glued_vendor-linux-gnu"
 cfg_target_linux='x86'
 cfg_target_gcc_configure_flags='--with-arch=i586 --with-cpu=i586 --with-tune=i586'
 cfg_target_gcc_flags='-O2 -pipe -march=i586 -funit-at-a-time'
-cfg_target_eglibc_configure_flags='--with-cpu=i586'
+cfg_target_glibc_configure_flags='--with-cpu=i586'

architectures/i686.cfg

@@ -2,5 +2,5 @@ cfg_target_canonical="i686-$cfg_glued_vendor-linux-gnu"
 cfg_target_linux='x86'
 cfg_target_gcc_flags='-O2 -pipe -march=i686 -funit-at-a-time'
 cfg_target_gcc_configure_flags='--with-cpu=i686'
-cfg_target_eglibc_configure_flags='--with-cpu=i686'
+cfg_target_glibc_configure_flags='--with-cpu=i686'
 cfg_target_linux_kernel='arch/x86/boot/bzImage'

architectures/mips32r2.cfg

@@ -2,4 +2,4 @@ cfg_target_canonical="mipsisa32r2-$cfg_glued_vendor-linux-gnu"
 cfg_target_linux='mips'
 cfg_target_gcc_flags='-O2 -pipe -funit-at-a-time -mabi=32 -mips32r2 -mtune=mips32r2 -msoft-float'
 cfg_target_gcc_configure_flags='--with-abi=32 --with-tune=mips32r2 --with-float=soft'
-cfg_target_eglibc_configure_flags='--without-fp'
+cfg_target_glibc_configure_flags='--without-fp'

docker/Dockerfile

@@ -0,0 +1,37 @@
+###########################################################################
+# GLUED: GNU/Linux Uniform Environment Distribution                       #
+# Copyright (C) 2016 OceanScan - Marine Systems & Technology, Lda.        #
+###########################################################################
+# This program is free software; you can redistribute it and/or modify    #
+# it under the terms of the GNU General Public License as published by    #
+# the Free Software Foundation; either version 2 of the License, or (at   #
+# your option) any later version.                                         #
+#                                                                         #
+# This program is distributed in the hope that it will be useful, but     #
+# WITHOUT ANY WARRANTY; without even the implied warranty of              #
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU       #
+# General Public License for more details.                                #
+#                                                                         #
+# You should have received a copy of the GNU General Public License       #
+# along with this program; if not, write to the Free Software             #
+# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA           #
+# 02110-1301 USA.                                                         #
+###########################################################################
+# Author: Ricardo Martins                                                 #
+###########################################################################
+
+FROM debian:8
+
+MAINTAINER Ricardo Martins <rasm@oceanscan-mst.com>
+
+ENV DEBIAN_FRONTEND noninteractive
+
+# Update distro.
+RUN apt-get update -y
+RUN apt-get dist-upgrade -y
+RUN apt-get install -y wget
+RUN apt-get install -y bzip2
+RUN apt-get install -y git
+RUN apt-get install -y g++-multilib
+RUN apt-get install -y cmake
+RUN apt-get install -y file

docker/Makefile

@@ -0,0 +1,31 @@
+###########################################################################
+# GLUED: GNU/Linux Uniform Environment Distribution                       #
+# Copyright (C) 2016 OceanScan - Marine Systems & Technology, Lda.        #
+###########################################################################
+# This program is free software; you can redistribute it and/or modify    #
+# it under the terms of the GNU General Public License as published by    #
+# the Free Software Foundation; either version 2 of the License, or (at   #
+# your option) any later version.                                         #
+#                                                                         #
+# This program is distributed in the hope that it will be useful, but     #
+# WITHOUT ANY WARRANTY; without even the implied warranty of              #
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU       #
+# General Public License for more details.                                #
+#                                                                         #
+# You should have received a copy of the GNU General Public License       #
+# along with this program; if not, write to the Free Software             #
+# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA           #
+# 02110-1301 USA.                                                         #
+###########################################################################
+# Author: Ricardo Martins                                                 #
+###########################################################################
+
+TAG     := glued
+VERSION := 2016.05.0
+VOLUME  := $(CURDIR)/..
+
+all:
+	docker build -t $(TAG):$(VERSION) .
+
+shell:
+	docker run -w $(VOLUME) -i -a stdin -a stdout -v $(VOLUME):$(VOLUME) -t $(TAG):$(VERSION)

functions.bash

@@ -40,3 +40,15 @@ err()
 {
     echo -e "[$(date +"%Y-%m-%d %H:%M:%S")] \033[0m\033[1;31mERROR: $*\033[0m"
 }
+
+ucat()
+{
+    case "$1" in
+        *.gz)
+            zcat "$1"
+            ;;
+        *)
+            cat "$1"
+            ;;
+    esac
+}

mkconfig.bash

@@ -23,7 +23,7 @@
 ###########################################################################
 
 # Config: GLUED version.
-cfg_glued_version='1.11.x'
+cfg_glued_version='2016.05'
 # Config: GLUED vendor.
 cfg_glued_vendor='lsts'
 
@@ -166,6 +166,19 @@ if [ -z $cfg_toolchain_tar ]; then
     cfg_toolchain_tar="$cfg_dir_base/$cfg_sys_family/glued-$cfg_glued_version-$cfg_sys_family-toolchain-$cfg_host_canonical-$cfg_target_canonical.tar.bz2"
 fi
 
+# Config: Git revision.
+git_branch=$(echo $(git rev-parse --symbolic-full-name --abbrev-ref HEAD 2> /dev/null))
+git_revision=$(echo $(git rev-parse --short HEAD 2> /dev/null))
+git_status=$(echo $(git status -s 2> /dev/null))
+if [ -z "$git_branch" ] || [ -z "$git_revision" ]; then
+    cfg_glued_git_version='unknown'
+else
+    cfg_glued_git_version="$git_branch-$git_revision"
+    if [ -n "$git_status" ]; then
+        cfg_glued_git_version="$cfg_glued_git_version-dirty"
+    fi
+fi
+
 if ! [ -d "$cfg_sys_family" ]; then
     mkdir -p "$cfg_sys_family"
 fi &&

mkdisk.bash

@@ -24,16 +24,16 @@
 
 cmd_parted()
 {
-    dev="$1"; shift
-    "$cmd_parted" "$dev" -a cylinder -s -- $@
+    bdev="$1"; shift
+    "$cmd_parted" "$bdev" -a cylinder -s -- $@
 }
 
 cmd_mount()
 {
     fs="$1"
-    dev="$2"
+    bdev="$2"
     mkdir -p mount &&
-    mount -t "$fs" "$dev" mount
+    mount -t "$fs" "$bdev" mount
 }
 
 cmd_unmount()
@@ -47,7 +47,7 @@ cmd_unmount()
 
 die()
 {
-    umount mount > /dev/null 2>&1
+    umount -v mount > /dev/null 2>&1
     rmdir mount > /dev/null 2>&1
     [ -n "$dev_loop" ] && losetup -d "$dev_loop"
     exit 1
@@ -84,6 +84,44 @@ create_part_xboot()
     cmd_parted "$dev_loop" print > /dev/null
 }
 
+create_part_rpiboot()
+{
+    nfo1 "RPi-Boot partition ($part_label)"
+
+    nfo2 "Creating partition"
+    cmd_parted "$dev_loop" \
+        mkpart primary fat32 "$part_start" "$part_end" \
+        set "$part_nr" boot on \
+        align-check minimal "$part_nr" \
+        || die
+
+    nfo2 "Creating filesystem"
+    $cmd_mkdosfs -n "$part_label" "$part_dev" > /dev/null || die
+
+    nfo2 "Populating filesystem"
+    cmd_mount vfat "$part_dev" || die
+
+    for f in "$cfg_sys_family/rootfs/boot/"*; do
+        nfo2 installing $f to boot partition
+        cp -r "$f" mount || die
+    done
+
+    nfo2 renaming kernel to kernel7.img
+    mv mount/kernel mount/kernel7.img
+
+    if [ -f mount/board.dtb ]; then
+        dtb=$(basename "$cfg_target_linux_dtb")
+        nfo2 renaming board.dtb to "$dtb"
+        mv "mount/board.dtb" "mount/$dtb"
+    fi
+
+    cmd_parted "$dev_loop" \
+        set "$part_nr" lba on \
+        || die
+
+    cmd_parted "$dev_loop" print > /dev/null
+}
+
 create_part_root()
 {
     nfo1 "Root partition ($part_label)"
@@ -95,7 +133,7 @@ create_part_root()
         || die
 
     nfo2 "Creating filesystem"
-    mkfs.ext2 -q -L "$part_label" "$part_dev" || die
+    "$cmd_mkfs_ext2" -q -F -L "$part_label" "$part_dev" > /dev/null 2>&1 || die
 
     nfo2 "Populating filesystem"
     cmd_mount ext2 "$part_dev" || die
@@ -128,7 +166,7 @@ create_part_data()
         || die
 
     nfo2 "Creating filesystem"
-    mkfs.ext4 -q -L "$part_label" -O dir_index "$part_dev" || die
+    "$cmd_mkfs_ext4" -q -F -L "$part_label" -O dir_index "$part_dev" > /dev/null 2>&1 || die
 
     nfo2 "Populating filesystem"
     cmd_mount ext4 "$part_dev" || die
@@ -167,6 +205,13 @@ else
     cmd_parted="parted"
 fi
 
+if [ -x "$cfg_dir_toolchain/sbin/fdisk" ]; then
+    cmd_fdisk="$cfg_dir_toolchain/sbin/fdisk"
+else
+    echo "Warning: using system fdisk, this might lead to errors"
+    cmd_fdisk="fdisk"
+fi
+
 if [ -x "$cfg_dir_toolchain/sbin/mkdosfs" ]; then
     cmd_mkdosfs="$cfg_dir_toolchain/sbin/mkdosfs"
 else
@@ -174,6 +219,20 @@ else
     cmd_mkdosfs="mkdosfs"
 fi
 
+if [ -x "$cfg_dir_toolchain/sbin/mkfs.ext2" ]; then
+    cmd_mkfs_ext2="$cfg_dir_toolchain/sbin/mkfs.ext2"
+else
+    echo "Warning: using system mkfs.ext2, this might lead to errors"
+    cmd_mkfs_ext2="mkfs.ext2"
+fi
+
+if [ -x "$cfg_dir_toolchain/sbin/mkfs.ext4" ]; then
+    cmd_mkfs_ext4="$cfg_dir_toolchain/sbin/mkfs.ext4"
+else
+    echo "Warning: using system mkfs.ext4, this might lead to errors"
+    cmd_mkfs_ext4="mkfs.ext4"
+fi
+
 source "functions.bash"
 
 dev="$2"
@@ -196,26 +255,46 @@ if [ -z "$cfg_partitions" ]; then
     )
 fi
 
-# Loop device.
-dev_loop="$(losetup -f)"
+cmd_loop_attach()
+{
+    export dev="$1"
+    export dev_loop="$(losetup -f)"
 
-nfo1 "Attaching $dev to $dev_loop"
-losetup -v "$dev_loop" "$dev"
-if [ $? -ne 0 ]; then
+    nfo1 "Attaching $dev to $dev_loop"
+    losetup -v "$dev_loop" "$dev"
+    if [ $? -ne 0 ]; then
+        unset dev_loop
+        die
+    fi
+}
+
+cmd_loop_detach()
+{
+    nfo1 "Detaching $dev_loop"
+    sync && sync && sync && sync
+    blockdev --flushbufs "$dev_loop"
+    losetup -v -d "$dev_loop"
+    sync && sync && sync && sync
     unset dev_loop
-    die
-fi
+}
 
 nfo1 "Obliterating partition table"
+cmd_loop_attach "$dev"
 dd if=/dev/zero of="$dev_loop" bs=1 count=1M count=32 > /dev/null 2>&1 || die
+losetup -a
+cmd_loop_detach
+losetup -a
 
 nfo1 "Creating empty partition table"
-cmd_parted "$dev_loop" \
-    mklabel msdos \
-    || die
+cmd_loop_attach "$dev"
+cmd_parted "$dev_loop" mklabel msdos || die
+cmd_loop_detach
 
 part_nr=1
+xboot_system_id=0
 for ((i = 0; i < ${#cfg_partitions[@]}; i += 4)); do
+    cmd_loop_attach "$dev"
+
     part_type="${cfg_partitions[$i+0]}"
     part_label="${cfg_partitions[$i+1]}"
     part_start="${cfg_partitions[$i+2]}"
@@ -225,6 +304,11 @@ for ((i = 0; i < ${#cfg_partitions[@]}; i += 4)); do
     case $part_type in
         'x-boot')
             create_part_xboot
+            xboot_system_id=1
+            ;;
+        'rpi-boot')
+            create_part_rpiboot
+            xboot_system_id=1
             ;;
         'root')
             create_part_root
@@ -238,17 +322,23 @@ for ((i = 0; i < ${#cfg_partitions[@]}; i += 4)); do
             ;;
     esac
 
+    cmd_loop_detach
     let part_nr++
 done
 
 if [ -f "$cfg_sys_family/rootfs/boot/extlinux/mbr.bin" ]; then
     nfo1 "Installing bootloader in MBR..."
+    cmd_loop_attach "$dev"
     dd if="$cfg_sys_family/rootfs/boot/extlinux/mbr.bin" of="$dev_loop" > /dev/null 2>&1
+    cmd_loop_detach
 fi
 
 nfo1 "Synchronizing caches"
 sync && sync && sync && sync && sync && sync
-blockdev --flushbufs "$dev_loop" || die
 
-nfo1 "Detaching loop device $dev_loop"
-losetup -v -d "$dev_loop"
+# Make sure the partition has 0x0e type.
+if [ $xboot_system_id -eq 1 ]; then
+    cmd_loop_attach "$dev"
+    echo -en "t\n1\ne\nw\n" | $cmd_fdisk "$dev_loop" > /dev/null 2>&1
+    cmd_loop_detach
+fi

mkpackage.bash

@@ -31,11 +31,12 @@ download_tool()
         return 0
     fi
 
-    curl -C - "$1" -o "$2"
+    curl -f -C - "$1" -o "$2"
     if [ $? -eq 0 ]; then
         return 0
     fi
 
+    rm -f "$2"
     return 1
 }
 
@@ -56,6 +57,7 @@ md5sum_tool()
 download()
 {
     n=0; while [ -n "${url[$n]}" ]; do
+
         u="${url[$n]}"
         s="${md5[$n]}"
         file=$(basename "$u")
@@ -69,10 +71,16 @@ download()
             fi
         fi
 
-        download_tool "$u" "$cfg_dir_downloads/$file"
+        # First try OceanScan-MST mirror.
+        omst_url="http://www.omst.pt/glued/$(basename $u)"
+        download_tool "$omst_url" "$cfg_dir_downloads/$file"
         if [ $? -ne 0 ]; then
-            echo "ERROR: download failed"
-            exit 1
+            # On failure try upstream URL.
+            download_tool "$u" "$cfg_dir_downloads/$file"
+            if [ $? -ne 0 ]; then
+                echo "ERROR: download failed"
+                exit 1
+            fi
         fi
 
         md5="$(md5sum_tool "$cfg_dir_downloads/$file")"

pkrootfs.bash

@@ -58,6 +58,11 @@ for d in dev boot etc; do
     $fakeroot -- chmod -vR 0644 "$cfg_dir_rootfs"/$d/*
 done
 
+# Copy DTB.
+if [ -n "$cfg_target_linux_dtb" ]; then
+    cp -v "$cfg_dir_rootfs/boot/$(basename $cfg_target_linux_dtb)" "$cfg_dir_rootfs/boot/board.dtb"
+fi
+
 # Write config vars.
 set | sort | grep ^cfg_ | egrep -v '^cfg_dir|^cfg_target|^cfg_host_|^cfg_toolchain|^cfg_rootfs_tar|^cfg_partitions' > "$cfg_dir_rootfs/etc/config"
 

pktoolchain.bash

@@ -40,10 +40,13 @@ fi
 
 source "$1"
 
+toolchain_prefix="glued-$cfg_glued_version-$cfg_sys_family-toolchain-$cfg_host_canonical-$cfg_target_canonical"
+
 tar \
     -v \
     -j \
     -c \
+    --transform="s,^\./,$toolchain_prefix/," \
     -C "$cfg_dir_toolchain" \
     -f "$cfg_toolchain_tar" \
     .

rules/apr-util/default.bash

@@ -1,16 +1,16 @@
 version=\
 (
-    '1.5.2'
+    '1.5.3'
 )
 
 url=\
 (
-    "http://www.eu.apache.org/dist/apr/apr-util-$version.tar.bz2"
+    "http://archive.apache.org/dist/apr/apr-util-$version.tar.bz2"
 )
 
 md5=\
 (
-    '89c1348aa79e898d7c34a6206311c9c2'
+    '6f3417691c7a27090f36e7cf4d94b36e'
 )
 
 maintainer=\

rules/apr-util/ros.bash

@@ -5,7 +5,7 @@ version=\
 
 url=\
 (
-    "http://www.eu.apache.org/dist/apr/apr-util-$version.tar.bz2"
+    "http://archive.apache.org/dist/apr/apr-util-$version.tar.bz2"
 )
 
 md5=\

rules/apr/default.bash

@@ -1,16 +1,16 @@
 version=\
 (
-    '1.4.6'
+    '1.5.1'
 )
 
 url=\
 (
-    "http://www.eu.apache.org/dist/apr/apr-$version.tar.bz2"
+    "http://archive.apache.org/dist/apr/apr-$version.tar.bz2"
 )
 
 md5=\
 (
-    'ffee70a111fd07372982b0550bbb14b7'
+    '5486180ec5a23efb5cae6d4292b300ab'
 )
 
 maintainer=\

rules/apr/ros.bash

@@ -5,7 +5,7 @@ version=\
 
 url=\
 (
-    "http://mirror.nohup.it/apache/apr/apr-$version.tar.bz2"
+    "http://archive.apache.org/dist/apr/apr-$version.tar.bz2"
 )
 
 md5=\
@@ -15,7 +15,6 @@ md5=\
 
 # @todo patch.
 
-
 configure()
 {
   cd apr-${version}

rules/base/cross.bash

@@ -4,6 +4,5 @@ requires=\
 (
     'base/host'
     'gcc/cross'
-    'eglibc/locales'
     'gdb/cross'
 )

rules/base/default.bash

@@ -4,5 +4,6 @@ requires=\
 (
     'base/host'
     'base/cross'
+    'iana-etc/default'
     'filesystem/target'
 )

rules/base/host.bash

@@ -25,4 +25,5 @@ requires=\
     'texinfo/host'
     'parted/host'
     'dosfstools/host'
+    'e2fsprogs/host'
 )

rules/bc/host.bash

@@ -0,0 +1,42 @@
+version=\
+(
+    '1.06'
+)
+
+url=\
+(
+    "http://ftp.gnu.org/gnu/bc/bc-$version.tar.gz"
+)
+
+md5=\
+(
+    'd44b5dddebd8a7a7309aea6c36fda117'
+)
+
+maintainer=\
+(
+    'Ricardo Martins <rasm@fe.up.pt>'
+)
+
+requires=\
+(
+    'flex/host'
+)
+
+configure()
+{
+    ./configure \
+        --prefix="$cfg_dir_toolchain" \
+        --disable-shared \
+        --enable-static
+}
+
+build()
+{
+    $cmd_make
+}
+
+host_install()
+{
+    $cmd_make install
+}

rules/binutils/cross.bash

@@ -1,6 +1,6 @@
 version=\
 (
-    "2.22"
+    '2.25.1'
 )
 
 url=\
@@ -10,30 +10,26 @@ url=\
 
 md5=\
 (
-    "ee0f10756c84979622b992a4a61ea3f5"
+    'ac493a78de4fee895961d025b7905be4'
 )
 
 maintainer=\
 (
-    "Ricardo Martins <rasm@fe.up.pt>"
+    'Ricardo Martins <rasm@fe.up.pt>'
 )
 
 build_dir=$pkg_var
 
 configure()
 {
-    ../binutils-$version/configure $extra_flags \
-        --prefix=$cfg_dir_toolchain \
-        --target=${cfg_target_canonical} \
-        --host=${cfg_host_canonical} \
-        --build=${cfg_host_canonical} \
-        --with-sysroot=$cfg_dir_toolchain_sysroot \
-        --with-mpfr=${cfg_dir_toolchain} \
-        --with-gmp=${cfg_dir_toolchain} \
-        --with-mpc=${cfg_dir_toolchain} \
-        --disable-nls \
-        --disable-werror \
-        --disable-multilib
+    "../binutils-$version/configure" \
+        --prefix="$cfg_dir_toolchain" \
+        --target="$cfg_target_canonical" \
+        --host="$cfg_host_canonical" \
+        --build="$cfg_host_canonical" \
+        --with-sysroot="$cfg_dir_toolchain_sysroot" \
+        --disable-multilib \
+        --disable-nls
 }
 
 build()
@@ -43,6 +39,5 @@ build()
 
 host_install()
 {
-    $cmd_make install
-    rm -rf $cfg_dir_toolchain/{info,man}
+    $cmd_make install-strip
 }

rules/boost/default.bash

@@ -1,6 +1,6 @@
 version=\
 (
-    "1.53.0"
+    "1.55.0"
 )
 
 vendor_version="$(echo $version | tr . _)"
@@ -17,7 +17,7 @@ maintainer=\
 
 md5=\
 (
-    "a00d22605d5dbcfb4c9936a9b35bc4c2"
+    "d6eef4b4cacb2183f2bf265a5a03a354"
 )
 
 requires=\

rules/boost/patches-1.47.0/00-issue-with-thread.patch

@@ -1,11 +0,0 @@
---- boost_1_47_0/boost/config/stdlib/libstdcpp3.hpp	2011-04-25 14:10:48.000000000 +0200
-+++ boost_1_47_0/boost/config/stdlib/libstdcpp3.hpp	2013-04-08 16:26:05.222543782 +0200
-@@ -33,7 +33,7 @@
- 
- #ifdef __GLIBCXX__ // gcc 3.4 and greater:
- #  if defined(_GLIBCXX_HAVE_GTHR_DEFAULT) \
--        || defined(_GLIBCXX__PTHREADS)
-+        || defined(_GLIBCXX__PTHREADS) || defined(_GLIBCXX_HAS_GTHREADS)
-       //
-       // If the std lib has thread support turned on, then turn it on in Boost
-       // as well.  We do this because some gcc-3.4 std lib headers define _REENTANT

rules/busybox/config

@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Busybox version: 1.20.2
-# Tue May 14 09:03:37 2013
+# Busybox version: 1.24.1
+# Tue Apr  5 18:00:54 2016
 #
 CONFIG_HAVE_DOT_CONFIG=y
 
@@ -36,12 +36,15 @@ CONFIG_LAST_SUPPORTED_WCHAR=767
 # CONFIG_UNICODE_BIDI_SUPPORT is not set
 # CONFIG_UNICODE_NEUTRAL_TABLE is not set
 # CONFIG_UNICODE_PRESERVE_BROKEN is not set
+# CONFIG_PAM is not set
+CONFIG_FEATURE_USE_SENDFILE=y
 CONFIG_LONG_OPTS=y
 CONFIG_FEATURE_DEVPTS=y
 # CONFIG_FEATURE_CLEAN_UP is not set
 # CONFIG_FEATURE_UTMP is not set
 # CONFIG_FEATURE_WTMP is not set
 # CONFIG_FEATURE_PIDFILE is not set
+CONFIG_PID_FILE_PATH=""
 CONFIG_FEATURE_SUID=y
 # CONFIG_FEATURE_SUID_CONFIG is not set
 # CONFIG_FEATURE_SUID_CONFIG_QUIET is not set
@@ -72,6 +75,7 @@ CONFIG_EXTRA_LDLIBS=""
 #
 # CONFIG_DEBUG is not set
 # CONFIG_DEBUG_PESSIMIZE is not set
+# CONFIG_UNIT_TEST is not set
 # CONFIG_WERROR is not set
 CONFIG_NO_DEBUG_LIB=y
 # CONFIG_DMALLOC is not set
@@ -96,6 +100,7 @@ CONFIG_PREFIX="./_install"
 CONFIG_FEATURE_RTMINMAX=y
 CONFIG_PASSWORD_MINLEN=6
 CONFIG_MD5_SMALL=1
+CONFIG_SHA3_SMALL=1
 CONFIG_FEATURE_FAST_TOP=y
 # CONFIG_FEATURE_ETC_NETWORKS is not set
 CONFIG_FEATURE_USE_TERMIOS=y
@@ -133,7 +138,14 @@ CONFIG_FEATURE_SEAMLESS_BZ2=y
 # CONFIG_AR is not set
 # CONFIG_FEATURE_AR_LONG_FILENAMES is not set
 # CONFIG_FEATURE_AR_CREATE is not set
+# CONFIG_UNCOMPRESS is not set
+CONFIG_GUNZIP=y
 CONFIG_BUNZIP2=y
+# CONFIG_UNLZMA is not set
+# CONFIG_FEATURE_LZMA_FAST is not set
+# CONFIG_LZMA is not set
+CONFIG_UNXZ=y
+CONFIG_XZ=y
 # CONFIG_BZIP2 is not set
 # CONFIG_CPIO is not set
 # CONFIG_FEATURE_CPIO_O is not set
@@ -141,10 +153,10 @@ CONFIG_BUNZIP2=y
 # CONFIG_DPKG is not set
 # CONFIG_DPKG_DEB is not set
 # CONFIG_FEATURE_DPKG_DEB_EXTRACT_ONLY is not set
-CONFIG_GUNZIP=y
 # CONFIG_GZIP is not set
 # CONFIG_FEATURE_GZIP_LONG_OPTIONS is not set
 CONFIG_GZIP_FAST=0
+# CONFIG_FEATURE_GZIP_LEVELS is not set
 # CONFIG_LZOP is not set
 # CONFIG_LZOP_COMPR_HIGH is not set
 # CONFIG_RPM2CPIO is not set
@@ -161,12 +173,6 @@ CONFIG_FEATURE_TAR_GNU_EXTENSIONS=y
 # CONFIG_FEATURE_TAR_UNAME_GNAME is not set
 # CONFIG_FEATURE_TAR_NOPRESERVE_TIME is not set
 # CONFIG_FEATURE_TAR_SELINUX is not set
-# CONFIG_UNCOMPRESS is not set
-# CONFIG_UNLZMA is not set
-# CONFIG_FEATURE_LZMA_FAST is not set
-# CONFIG_LZMA is not set
-CONFIG_UNXZ=y
-CONFIG_XZ=y
 # CONFIG_UNZIP is not set
 
 #
@@ -178,16 +184,27 @@ CONFIG_DATE=y
 CONFIG_FEATURE_DATE_ISOFMT=y
 # CONFIG_FEATURE_DATE_NANO is not set
 CONFIG_FEATURE_DATE_COMPAT=y
+CONFIG_DD=y
+CONFIG_FEATURE_DD_SIGNAL_HANDLING=y
+# CONFIG_FEATURE_DD_THIRD_STATUS_LINE is not set
+# CONFIG_FEATURE_DD_IBS_OBS is not set
+CONFIG_FEATURE_DD_STATUS=y
 # CONFIG_HOSTID is not set
 CONFIG_ID=y
 CONFIG_GROUPS=y
+CONFIG_SHUF=y
+CONFIG_SYNC=y
+CONFIG_FEATURE_SYNC_FANCY=y
 CONFIG_TEST=y
 # CONFIG_FEATURE_TEST_64 is not set
 CONFIG_TOUCH=y
+CONFIG_FEATURE_TOUCH_NODEREF=y
 CONFIG_FEATURE_TOUCH_SUSV3=y
 CONFIG_TR=y
 CONFIG_FEATURE_TR_CLASSES=y
 CONFIG_FEATURE_TR_EQUIV=y
+CONFIG_TRUNCATE=y
+CONFIG_UNLINK=y
 CONFIG_BASE64=y
 # CONFIG_WHO is not set
 # CONFIG_USERS is not set
@@ -203,10 +220,6 @@ CONFIG_CHROOT=y
 CONFIG_CP=y
 # CONFIG_FEATURE_CP_LONG_OPTIONS is not set
 CONFIG_CUT=y
-CONFIG_DD=y
-CONFIG_FEATURE_DD_SIGNAL_HANDLING=y
-# CONFIG_FEATURE_DD_THIRD_STATUS_LINE is not set
-# CONFIG_FEATURE_DD_IBS_OBS is not set
 CONFIG_DF=y
 # CONFIG_FEATURE_DF_FANCY is not set
 CONFIG_DIRNAME=y
@@ -263,6 +276,7 @@ CONFIG_SEQ=y
 # CONFIG_SHA1SUM is not set
 # CONFIG_SHA256SUM is not set
 # CONFIG_SHA512SUM is not set
+CONFIG_SHA3SUM=y
 CONFIG_SLEEP=y
 # CONFIG_FEATURE_FANCY_SLEEP is not set
 # CONFIG_FEATURE_FLOAT_SLEEP is not set
@@ -270,11 +284,10 @@ CONFIG_SORT=y
 # CONFIG_FEATURE_SORT_BIG is not set
 # CONFIG_SPLIT is not set
 # CONFIG_FEATURE_SPLIT_FANCY is not set
-# CONFIG_STAT is not set
-# CONFIG_FEATURE_STAT_FORMAT is not set
+CONFIG_STAT=y
+CONFIG_FEATURE_STAT_FORMAT=y
 CONFIG_STTY=y
 # CONFIG_SUM is not set
-CONFIG_SYNC=y
 # CONFIG_TAC is not set
 CONFIG_TAIL=y
 # CONFIG_FEATURE_FANCY_TAIL is not set
@@ -283,6 +296,7 @@ CONFIG_TEE=y
 CONFIG_TRUE=y
 CONFIG_TTY=y
 CONFIG_UNAME=y
+CONFIG_UNAME_OSNAME="GNU/Linux"
 # CONFIG_UNEXPAND is not set
 # CONFIG_FEATURE_UNEXPAND_LONG_OPTIONS is not set
 CONFIG_UNIQ=y
@@ -294,6 +308,11 @@ CONFIG_WC=y
 CONFIG_WHOAMI=y
 CONFIG_YES=y
 
+#
+# Common options
+#
+CONFIG_FEATURE_VERBOSE=y
+
 #
 # Common options for cp and mv
 #
@@ -310,7 +329,7 @@ CONFIG_FEATURE_AUTOWIDTH=y
 CONFIG_FEATURE_HUMAN_READABLE=y
 
 #
-# Common options for md5sum, sha1sum, sha256sum, sha512sum
+# Common options for md5sum, sha1sum, sha256sum, sha512sum, sha3sum
 #
 # CONFIG_FEATURE_MD5_SHA1_SUM_CHECK is not set
 
@@ -356,7 +375,16 @@ CONFIG_WHICH=y
 #
 # Editors
 #
+CONFIG_AWK=y
+# CONFIG_FEATURE_AWK_LIBM is not set
+CONFIG_FEATURE_AWK_GNU_EXTENSIONS=y
+CONFIG_CMP=y
+# CONFIG_DIFF is not set
+# CONFIG_FEATURE_DIFF_LONG_OPTIONS is not set
+# CONFIG_FEATURE_DIFF_DIR is not set
+# CONFIG_ED is not set
 # CONFIG_PATCH is not set
+CONFIG_SED=y
 CONFIG_VI=y
 CONFIG_FEATURE_VI_MAX_LEN=4096
 CONFIG_FEATURE_VI_8BIT=y
@@ -371,15 +399,9 @@ CONFIG_FEATURE_VI_USE_SIGNALS=y
 # CONFIG_FEATURE_VI_SET is not set
 CONFIG_FEATURE_VI_WIN_RESIZE=y
 CONFIG_FEATURE_VI_ASK_TERMINAL=y
-# CONFIG_FEATURE_VI_OPTIMIZE_CURSOR is not set
-CONFIG_AWK=y
-# CONFIG_FEATURE_AWK_LIBM is not set
-CONFIG_CMP=y
-# CONFIG_DIFF is not set
-# CONFIG_FEATURE_DIFF_LONG_OPTIONS is not set
-# CONFIG_FEATURE_DIFF_DIR is not set
-# CONFIG_ED is not set
-CONFIG_SED=y
+CONFIG_FEATURE_VI_UNDO=y
+CONFIG_FEATURE_VI_UNDO_QUEUE=y
+CONFIG_FEATURE_VI_UNDO_QUEUE_MAX=256
 CONFIG_FEATURE_ALLOW_EXEC=y
 
 #
@@ -396,6 +418,7 @@ CONFIG_FEATURE_FIND_MAXDEPTH=y
 # CONFIG_FEATURE_FIND_NEWER is not set
 # CONFIG_FEATURE_FIND_INUM is not set
 CONFIG_FEATURE_FIND_EXEC=y
+CONFIG_FEATURE_FIND_EXEC_PLUS=y
 CONFIG_FEATURE_FIND_USER=y
 CONFIG_FEATURE_FIND_GROUP=y
 CONFIG_FEATURE_FIND_NOT=y
@@ -417,6 +440,7 @@ CONFIG_XARGS=y
 CONFIG_FEATURE_XARGS_SUPPORT_QUOTES=y
 # CONFIG_FEATURE_XARGS_SUPPORT_TERMOPT is not set
 CONFIG_FEATURE_XARGS_SUPPORT_ZERO_TERM=y
+CONFIG_FEATURE_XARGS_SUPPORT_REPL_STR=y
 
 #
 # Init Utilities
@@ -453,6 +477,7 @@ CONFIG_USE_BB_CRYPT=y
 CONFIG_ADDUSER=y
 # CONFIG_FEATURE_ADDUSER_LONG_OPTIONS is not set
 # CONFIG_FEATURE_CHECK_NAMES is not set
+CONFIG_LAST_ID=60000
 CONFIG_FIRST_SYSTEM_ID=100
 CONFIG_LAST_SYSTEM_ID=999
 CONFIG_ADDGROUP=y
@@ -464,7 +489,6 @@ CONFIG_DELGROUP=y
 CONFIG_GETTY=y
 CONFIG_LOGIN=y
 # CONFIG_LOGIN_SESSION_AS_CHILD is not set
-# CONFIG_PAM is not set
 # CONFIG_LOGIN_SCRIPTS is not set
 CONFIG_FEATURE_NOLOGIN=y
 # CONFIG_FEATURE_SECURETTY is not set
@@ -522,13 +546,26 @@ CONFIG_DEFAULT_DEPMOD_FILE="modules.dep"
 # Linux System Utilities
 #
 CONFIG_BLOCKDEV=y
+CONFIG_FATATTR=y
+CONFIG_FSTRIM=y
 CONFIG_MDEV=y
 CONFIG_FEATURE_MDEV_CONF=y
 CONFIG_FEATURE_MDEV_RENAME=y
 CONFIG_FEATURE_MDEV_RENAME_REGEXP=y
 CONFIG_FEATURE_MDEV_EXEC=y
 CONFIG_FEATURE_MDEV_LOAD_FIRMWARE=y
+CONFIG_MOUNT=y
+# CONFIG_FEATURE_MOUNT_FAKE is not set
+# CONFIG_FEATURE_MOUNT_VERBOSE is not set
+# CONFIG_FEATURE_MOUNT_HELPERS is not set
+CONFIG_FEATURE_MOUNT_LABEL=y
+# CONFIG_FEATURE_MOUNT_NFS is not set
+# CONFIG_FEATURE_MOUNT_CIFS is not set
+CONFIG_FEATURE_MOUNT_FLAGS=y
+CONFIG_FEATURE_MOUNT_FSTAB=y
+CONFIG_FEATURE_MOUNT_OTHERTAB=y
 CONFIG_REV=y
+CONFIG_UEVENT=y
 # CONFIG_ACPID is not set
 # CONFIG_FEATURE_ACPID_COMPAT is not set
 CONFIG_BLKID=y
@@ -574,15 +611,6 @@ CONFIG_FEATURE_HWCLOCK_ADJTIME_FHS=y
 # CONFIG_MKSWAP is not set
 # CONFIG_FEATURE_MKSWAP_UUID is not set
 CONFIG_MORE=y
-CONFIG_MOUNT=y
-# CONFIG_FEATURE_MOUNT_FAKE is not set
-# CONFIG_FEATURE_MOUNT_VERBOSE is not set
-# CONFIG_FEATURE_MOUNT_HELPERS is not set
-CONFIG_FEATURE_MOUNT_LABEL=y
-# CONFIG_FEATURE_MOUNT_NFS is not set
-# CONFIG_FEATURE_MOUNT_CIFS is not set
-CONFIG_FEATURE_MOUNT_FLAGS=y
-CONFIG_FEATURE_MOUNT_FSTAB=y
 CONFIG_PIVOT_ROOT=y
 # CONFIG_RDATE is not set
 # CONFIG_RDEV is not set
@@ -592,8 +620,9 @@ CONFIG_PIVOT_ROOT=y
 # CONFIG_SCRIPTREPLAY is not set
 # CONFIG_SETARCH is not set
 # CONFIG_SWAPONOFF is not set
+# CONFIG_FEATURE_SWAPON_DISCARD is not set
 # CONFIG_FEATURE_SWAPON_PRI is not set
-# CONFIG_SWITCH_ROOT is not set
+CONFIG_SWITCH_ROOT=y
 CONFIG_UMOUNT=y
 CONFIG_FEATURE_UMOUNT_ALL=y
 
@@ -608,32 +637,45 @@ CONFIG_VOLUMEID=y
 #
 # Filesystem/Volume identification
 #
-CONFIG_FEATURE_VOLUMEID_EXT=y
 # CONFIG_FEATURE_VOLUMEID_BTRFS is not set
-# CONFIG_FEATURE_VOLUMEID_REISERFS is not set
+# CONFIG_FEATURE_VOLUMEID_CRAMFS is not set
+CONFIG_FEATURE_VOLUMEID_EXFAT=y
+CONFIG_FEATURE_VOLUMEID_EXT=y
+CONFIG_FEATURE_VOLUMEID_F2FS=y
 CONFIG_FEATURE_VOLUMEID_FAT=y
 # CONFIG_FEATURE_VOLUMEID_HFS is not set
-# CONFIG_FEATURE_VOLUMEID_JFS is not set
-# CONFIG_FEATURE_VOLUMEID_XFS is not set
-# CONFIG_FEATURE_VOLUMEID_NTFS is not set
 # CONFIG_FEATURE_VOLUMEID_ISO9660 is not set
-# CONFIG_FEATURE_VOLUMEID_UDF is not set
-# CONFIG_FEATURE_VOLUMEID_LUKS is not set
-# CONFIG_FEATURE_VOLUMEID_LINUXSWAP is not set
-# CONFIG_FEATURE_VOLUMEID_CRAMFS is not set
-# CONFIG_FEATURE_VOLUMEID_ROMFS is not set
-# CONFIG_FEATURE_VOLUMEID_SYSV is not set
-# CONFIG_FEATURE_VOLUMEID_OCFS2 is not set
+# CONFIG_FEATURE_VOLUMEID_JFS is not set
 # CONFIG_FEATURE_VOLUMEID_LINUXRAID is not set
+# CONFIG_FEATURE_VOLUMEID_LINUXSWAP is not set
+# CONFIG_FEATURE_VOLUMEID_LUKS is not set
+CONFIG_FEATURE_VOLUMEID_NILFS=y
+# CONFIG_FEATURE_VOLUMEID_NTFS is not set
+# CONFIG_FEATURE_VOLUMEID_OCFS2 is not set
+# CONFIG_FEATURE_VOLUMEID_REISERFS is not set
+# CONFIG_FEATURE_VOLUMEID_ROMFS is not set
+CONFIG_FEATURE_VOLUMEID_SQUASHFS=y
+# CONFIG_FEATURE_VOLUMEID_SYSV is not set
+# CONFIG_FEATURE_VOLUMEID_UDF is not set
+# CONFIG_FEATURE_VOLUMEID_XFS is not set
 
 #
 # Miscellaneous Utilities
 #
 # CONFIG_CONSPY is not set
+# CONFIG_CROND is not set
+# CONFIG_FEATURE_CROND_D is not set
+# CONFIG_FEATURE_CROND_CALL_SENDMAIL is not set
+CONFIG_FEATURE_CROND_DIR=""
+CONFIG_I2CGET=y
+CONFIG_I2CSET=y
+CONFIG_I2CDUMP=y
+CONFIG_I2CDETECT=y
 CONFIG_LESS=y
 CONFIG_FEATURE_LESS_MAXLINES=9999999
 CONFIG_FEATURE_LESS_BRACKETS=y
 CONFIG_FEATURE_LESS_FLAGS=y
+CONFIG_FEATURE_LESS_TRUNCATE=y
 # CONFIG_FEATURE_LESS_MARKS is not set
 # CONFIG_FEATURE_LESS_REGEXP is not set
 # CONFIG_FEATURE_LESS_WINCH is not set
@@ -642,13 +684,17 @@ CONFIG_FEATURE_LESS_FLAGS=y
 # CONFIG_FEATURE_LESS_LINENUMS is not set
 # CONFIG_NANDWRITE is not set
 # CONFIG_NANDDUMP is not set
+# CONFIG_RFKILL is not set
 CONFIG_SETSERIAL=y
+# CONFIG_TASKSET is not set
+# CONFIG_FEATURE_TASKSET_FANCY is not set
 # CONFIG_UBIATTACH is not set
 # CONFIG_UBIDETACH is not set
 CONFIG_UBIMKVOL=y
 CONFIG_UBIRMVOL=y
 CONFIG_UBIRSVOL=y
 CONFIG_UBIUPDATEVOL=y
+# CONFIG_WALL is not set
 # CONFIG_ADJTIMEX is not set
 # CONFIG_BBCONFIG is not set
 # CONFIG_FEATURE_COMPRESS_BBCONFIG is not set
@@ -664,10 +710,6 @@ CONFIG_FEATURE_BEEP_LENGTH_MS=0
 # CONFIG_FEATURE_CHAT_VAR_ABORT_LEN is not set
 # CONFIG_FEATURE_CHAT_CLR_ABORT is not set
 # CONFIG_CHRT is not set
-# CONFIG_CROND is not set
-# CONFIG_FEATURE_CROND_D is not set
-# CONFIG_FEATURE_CROND_CALL_SENDMAIL is not set
-CONFIG_FEATURE_CROND_DIR=""
 # CONFIG_CRONTAB is not set
 # CONFIG_DC is not set
 # CONFIG_FEATURE_DC_LIBM is not set
@@ -683,7 +725,7 @@ CONFIG_FEATURE_CROND_DIR=""
 CONFIG_FLASHCP=y
 CONFIG_FLASH_LOCK=y
 CONFIG_FLASH_UNLOCK=y
-# CONFIG_FLASH_ERASEALL is not set
+CONFIG_FLASH_ERASEALL=y
 # CONFIG_IONICE is not set
 # CONFIG_INOTIFYD is not set
 # CONFIG_LAST is not set
@@ -705,18 +747,14 @@ CONFIG_MOUNTPOINT=y
 # CONFIG_MT is not set
 # CONFIG_RAIDAUTORUN is not set
 # CONFIG_READAHEAD is not set
-# CONFIG_RFKILL is not set
 # CONFIG_RUNLEVEL is not set
 # CONFIG_RX is not set
 # CONFIG_SETSID is not set
 # CONFIG_STRINGS is not set
-# CONFIG_TASKSET is not set
-# CONFIG_FEATURE_TASKSET_FANCY is not set
 CONFIG_TIME=y
 # CONFIG_TIMEOUT is not set
 # CONFIG_TTYSIZE is not set
 # CONFIG_VOLNAME is not set
-# CONFIG_WALL is not set
 CONFIG_WATCHDOG=y
 
 #
@@ -732,6 +770,13 @@ CONFIG_NC_EXTRA=y
 CONFIG_PING=y
 # CONFIG_PING6 is not set
 CONFIG_FEATURE_FANCY_PING=y
+CONFIG_WGET=y
+# CONFIG_FEATURE_WGET_STATUSBAR is not set
+CONFIG_FEATURE_WGET_AUTHENTICATION=y
+# CONFIG_FEATURE_WGET_LONG_OPTIONS is not set
+CONFIG_FEATURE_WGET_TIMEOUT=y
+CONFIG_FEATURE_WGET_OPENSSL=y
+CONFIG_FEATURE_WGET_SSL_HELPER=y
 CONFIG_WHOIS=y
 # CONFIG_FEATURE_IPV6 is not set
 # CONFIG_FEATURE_UNIX_LOCAL is not set
@@ -748,13 +793,13 @@ CONFIG_ETHER_WAKE=y
 CONFIG_FTPD=y
 CONFIG_FEATURE_FTP_WRITE=y
 CONFIG_FEATURE_FTPD_ACCEPT_BROKEN_LIST=y
+CONFIG_FEATURE_FTP_AUTHENTICATION=y
 # CONFIG_FTPGET is not set
 # CONFIG_FTPPUT is not set
 # CONFIG_FEATURE_FTPGETPUT_LONG_OPTIONS is not set
 CONFIG_HOSTNAME=y
 # CONFIG_HTTPD is not set
 # CONFIG_FEATURE_HTTPD_RANGES is not set
-# CONFIG_FEATURE_HTTPD_USE_SENDFILE is not set
 # CONFIG_FEATURE_HTTPD_SETUID is not set
 # CONFIG_FEATURE_HTTPD_BASIC_AUTH is not set
 # CONFIG_FEATURE_HTTPD_AUTH_MD5 is not set
@@ -793,6 +838,7 @@ CONFIG_IP=y
 CONFIG_FEATURE_IP_ADDRESS=y
 CONFIG_FEATURE_IP_LINK=y
 CONFIG_FEATURE_IP_ROUTE=y
+CONFIG_FEATURE_IP_ROUTE_DIR="/etc/iproute2"
 # CONFIG_FEATURE_IP_TUNNEL is not set
 # CONFIG_FEATURE_IP_RULE is not set
 # CONFIG_FEATURE_IP_SHORT_FORMS is not set
@@ -811,6 +857,7 @@ CONFIG_FEATURE_IP_ROUTE=y
 # CONFIG_NSLOOKUP is not set
 # CONFIG_NTPD is not set
 # CONFIG_FEATURE_NTPD_SERVER is not set
+# CONFIG_FEATURE_NTPD_CONF is not set
 # CONFIG_PSCAN is not set
 CONFIG_ROUTE=y
 # CONFIG_SLATTACH is not set
@@ -844,6 +891,7 @@ CONFIG_FEATURE_TELNET_AUTOLOGIN=y
 CONFIG_DHCPD_LEASES_FILE=""
 CONFIG_UDHCPC=y
 # CONFIG_FEATURE_UDHCPC_ARPING is not set
+CONFIG_FEATURE_UDHCPC_SANITIZEOPT=y
 # CONFIG_FEATURE_UDHCP_PORT is not set
 CONFIG_UDHCP_DEBUG=9
 CONFIG_FEATURE_UDHCP_RFC3397=y
@@ -853,11 +901,6 @@ CONFIG_UDHCPC_SLACK_FOR_BUGGY_SERVERS=80
 CONFIG_IFUPDOWN_UDHCPC_CMD_OPTIONS=""
 # CONFIG_UDPSVD is not set
 # CONFIG_VCONFIG is not set
-CONFIG_WGET=y
-# CONFIG_FEATURE_WGET_STATUSBAR is not set
-CONFIG_FEATURE_WGET_AUTHENTICATION=y
-# CONFIG_FEATURE_WGET_LONG_OPTIONS is not set
-CONFIG_FEATURE_WGET_TIMEOUT=y
 # CONFIG_ZCIP is not set
 
 #
@@ -890,6 +933,13 @@ CONFIG_POWERTOP=y
 CONFIG_PSTREE=y
 CONFIG_PWDX=y
 CONFIG_SMEMCAP=y
+CONFIG_TOP=y
+CONFIG_FEATURE_TOP_CPU_USAGE_PERCENTAGE=y
+CONFIG_FEATURE_TOP_CPU_GLOBAL_PERCENTS=y
+# CONFIG_FEATURE_TOP_SMP_CPU is not set
+# CONFIG_FEATURE_TOP_DECIMALS is not set
+# CONFIG_FEATURE_TOP_SMP_PROCESS is not set
+CONFIG_FEATURE_TOPMEM=y
 CONFIG_UPTIME=y
 # CONFIG_FEATURE_UPTIME_UTMP_SUPPORT is not set
 CONFIG_FREE=y
@@ -910,13 +960,6 @@ CONFIG_FEATURE_PS_LONG=y
 # CONFIG_FEATURE_PS_UNUSUAL_SYSTEMS is not set
 CONFIG_RENICE=y
 # CONFIG_BB_SYSCTL is not set
-CONFIG_TOP=y
-CONFIG_FEATURE_TOP_CPU_USAGE_PERCENTAGE=y
-CONFIG_FEATURE_TOP_CPU_GLOBAL_PERCENTS=y
-# CONFIG_FEATURE_TOP_SMP_CPU is not set
-# CONFIG_FEATURE_TOP_DECIMALS is not set
-# CONFIG_FEATURE_TOP_SMP_PROCESS is not set
-CONFIG_FEATURE_TOPMEM=y
 # CONFIG_FEATURE_SHOW_THREADS is not set
 # CONFIG_WATCH is not set
 
@@ -962,6 +1005,7 @@ CONFIG_ASH_GETOPTS=y
 # CONFIG_ASH_BUILTIN_ECHO is not set
 CONFIG_ASH_BUILTIN_PRINTF=y
 CONFIG_ASH_BUILTIN_TEST=y
+CONFIG_ASH_HELP=y
 # CONFIG_ASH_CMDCMD is not set
 # CONFIG_ASH_MAIL is not set
 CONFIG_ASH_OPTIMIZE_FOR_SIZE=y
@@ -1011,6 +1055,11 @@ CONFIG_FEATURE_IPC_SYSLOG=y
 CONFIG_FEATURE_IPC_SYSLOG_BUFFER_SIZE=16
 CONFIG_LOGREAD=y
 CONFIG_FEATURE_LOGREAD_REDUCED_LOCKING=y
+CONFIG_FEATURE_KMSG_SYSLOG=y
 CONFIG_KLOGD=y
+
+#
+# klogd should not be used together with syslog to kernel printk buffer
+#
 CONFIG_FEATURE_KLOGD_KLOGCTL=y
 CONFIG_LOGGER=y

rules/busybox/default.bash

@@ -1,6 +1,6 @@
 version=\
 (
-    '1.22.0'
+    '1.24.1'
 )
 
 url=\
@@ -10,7 +10,7 @@ url=\
 
 md5=\
 (
-    'ac1881d1cdeb0729b22c663feaf1c663'
+    'be98a40cadf84ce2d6b05fa41a275c6a'
 )
 
 post_unpack()

rules/cdk/default.bash

@@ -1,16 +1,16 @@
 version=\
 (
-  "5.0-20120323"
+    '5.0-20140118'
 )
 
 url=\
 (
-  "ftp://invisible-island.net/cdk/cdk.tar.gz"
+    "ftp://invisible-island.net/cdk/cdk-$version.tgz"
 )
 
 md5=\
 (
-  "929969d06ce034e862976bb7d1a36b25"
+    'd2687e5558b6d6be5fd39328e5c86033'
 )
 
 requires=\
@@ -20,34 +20,34 @@ requires=\
 
 configure()
 {
-#        --target="${cfg_target_canonical}" \
-  ./configure \
-    --prefix="$cfg_dir_toolchain_sysroot/usr" \
-    --host="${cfg_target_canonical}" \
-    --build="${cfg_host_canonical}" \
+    #        --target="${cfg_target_canonical}" \
+    ./configure \
+        --prefix="$cfg_dir_toolchain_sysroot/usr" \
+        --host="${cfg_target_canonical}" \
+        --build="${cfg_host_canonical}" \
         --target="${cfg_target_canonical}" \
-    --with-ncursesw \
-    --with-shared   \
+        --with-ncursesw \
+        --with-shared   \
 
 }
 
 build()
 {
-  $cmd_make
+    $cmd_make
 }
 
 host_install()
 {
-  $cmd_make install
+    $cmd_make install
 }
 
 target_install()
 {
-  for f in "$cfg_dir_toolchain_sysroot/usr/lib/libcdk"* ; do
-    if [ -L "$f" ]; then
-      cp -av "$f" "$cfg_dir_rootfs/usr/lib"
-    else
-      $cmd_target_strip -v "$f" -o "$cfg_dir_rootfs/usr/lib/$(basename "$f")"
-    fi
-  done
+    for f in "$cfg_dir_toolchain_sysroot/usr/lib/libcdk"* ; do
+        if [ -L "$f" ]; then
+            cp -av "$f" "$cfg_dir_rootfs/usr/lib"
+        else
+            $cmd_target_strip -v "$f" -o "$cfg_dir_rootfs/usr/lib/$(basename "$f")"
+        fi
+    done
 }

rules/cloog/host.bash

@@ -0,0 +1,37 @@
+version=\
+(
+    '0.18.1'
+)
+
+url=\
+(
+    "ftp://gcc.gnu.org/pub/gcc/infrastructure/cloog-$version.tar.gz"
+)
+
+md5=\
+(
+    'e34fca0540d840e5d0f6427e98c92252'
+)
+
+maintainer=\
+(
+    'Ricardo Martins <rasm@oceanscan-mst.com>'
+)
+
+configure()
+{
+    "../cloog-$version/configure" \
+        --prefix="$cfg_dir_toolchain" \
+        --disable-shared \
+        --enable-static
+}
+
+build()
+{
+    $cmd_make
+}
+
+host_install()
+{
+    $cmd_make install-strip
+}

rules/cmake/host.bash

@@ -1,6 +1,6 @@
 version=\
 (
-    "2.8.8"
+    "2.8.9"
 )
 
 version_major=\
@@ -15,7 +15,7 @@ url=\
 
 md5=\
 (
-    "ba74b22c788a0c8547976b880cd02b17"
+    "801f4c87f8b604f727df5bf1f05a59e7"
 )
 
 configure()
@@ -26,10 +26,12 @@ configure()
 
 build()
 {
+    # Remove the trailling 'ncurses' folder from the CURSES_INCLUDE_PATH
+    cat CMakeCache.txt | sed  '/^CURSES_INCLUDE_PATH/s/\/ncurses$/\//g' > CMakeCache.txt  &&
     $cmd_make
 }
 
 host_install()
 {
-    $cmd_make install
+    $cmd_make DESTDIR="$cfg_dir_toolchain" install
 }

rules/confuse/default.bash

@@ -0,0 +1,50 @@
+version=\
+(
+    '2.8'
+)
+
+url=\
+(
+    "https://github.com/martinh/libconfuse/releases/download/v$version/confuse-$version.tar.gz"
+)
+
+md5=\
+(
+    'e94ade0372a43e80b35031046bbc2a33'
+)
+
+maintainer=\
+(
+    'Ricardo Martins <rasm@oceanscan-mst.com>'
+)
+
+configure()
+{
+    export PKG_CONFIG="${cfg_dir_toolchain}/bin/pkg-config"
+    export PKG_CONFIG_PATH="$cfg_dir_toolchain_sysroot/usr/lib/pkgconfig"
+    "../confuse-$version/configure" \
+        --prefix="$cfg_dir_toolchain_sysroot/usr" \
+        --target="$cfg_target_canonical" \
+        --host="$cfg_target_canonical" \
+        --build="$cfg_host_canonical" \
+        --disable-static \
+        --enable-shared
+}
+
+build()
+{
+    $cmd_make
+}
+
+host_install()
+{
+    export PKG_CONFIG="${cfg_dir_toolchain}/bin/pkg-config"
+    export PKG_CONFIG_PATH="$cfg_dir_toolchain_sysroot/usr/lib/pkgconfig"
+    $cmd_make install
+}
+
+target_install()
+{
+    cp -a "$cfg_dir_toolchain_sysroot/usr/lib/libconfuse"*.so* "$cfg_dir_rootfs/lib" &&
+    $cmd_target_strip "$cfg_dir_rootfs/lib/libconfuse"*.so*
+}

rules/coreboot-lsts/default.bash

@@ -0,0 +1,26 @@
+version=\
+(
+    '1.1.0'
+)
+
+url=\
+(
+    "http://www.lsts.pt/glued/coreboot-lsts-$version.tar.gz"
+)
+
+md5=\
+(
+    'a7c77a981778bec54f28f598814f11c6'
+)
+
+maintainer=\
+(
+    'Ricardo Martins <rasm@fe.up.pt>'
+)
+
+target_install()
+{
+    dir="$cfg_dir_rootfs/usr/share/coreboot-lsts"
+    $cmd_mkdir "$dir" &&
+    $cmd_cp "coreboot-lsts-$version.rom" "$dir"
+}

rules/db/default.bash

@@ -1,16 +1,16 @@
 version=\
 (
-    "4.8.26"
+    '4.8.30'
 )
 
 url=\
 (
-    "ftp://mirror.ovh.net/gentoo-distfiles/distfiles/db-$version.tar.gz"
+    "http://download.oracle.com/berkeley-db/db-$version.tar.gz"
 )
 
 md5=\
 (
-    "3476bac9ec0f3c40729c8a404151d5e3"
+    'f80022099c5742cd179343556179aa8c'
 )
 
 configure()

rules/desert/default.bash

@@ -1,79 +0,0 @@
-version=\
-(
-    '1.0'
-)
-
-ns_version=\
-(
-    '2.34'
-)
-
-url=\
-(
-    "http://www.lsts.pt/glued/desert-$version.tar.gz"
-)
-
-md5=\
-(
-    '5b83d1d6e5390a44f1dc0c5a3794581c'
-)
-
-requires=\
-(
-    'ns-miracle/default'
-)
-
-post_unpack()
-{
-    patches=$(ls "$pkg_dir/patches/"*.patch)
-    if [ -n "$patches" ]; then
-        cat $patches | patch -p0
-    fi
-}
-
-configure()
-{
-    find . -name "*.o" -exec rm {} \;
-    /usr/bin/aclocal -I m4 --force && /usr/bin/libtoolize --force && /usr/bin/automake --foreign --add-missing && /usr/bin/autoconf
-
-    prefix="/DESERT_lib"
-
-    sed "s#@TCL2CPP@#qemu-arm -L ${cfg_dir_rootfs} ${cfg_dir_rootfs}/lib/ld-linux.so.3 ${cfg_dir_toolchain_sysroot}/usr/bin/tcl2c++#g" "./m4/Makefile.in" -i
-    sed "s#@TCL2CPP@#qemu-arm -L ${cfg_dir_rootfs} ${cfg_dir_rootfs}/lib/ld-linux.so.3 ${cfg_dir_toolchain_sysroot}/usr/bin/tcl2c++#g" "./Makefile.in" -i
-
-    "./configure" \
-                --target="$cfg_target_canonical"                    \
-                --host="$cfg_target_canonical"                      \
-                --build="$cfg_host_canonical"                       \
-                --with-ns-allinone=${cfg_dir_builds}/ns/            \
-                --with-nsmiracle=${cfg_dir_builds}/ns-miracle/ns-miracle-1.0/trunk/main/      \
-                --prefix="$prefix"
-
-}
-
-build()
-{
-    $cmd_make -j1 \
-       TCL2CPP="qemu-arm -L ${cfg_dir_rootfs} ${cfg_dir_rootfs}/lib/ld-linux.so.3 ${cfg_dir_toolchain_sysroot}/usr/bin/tcl2c++"
-}
-
-host_install()
-{
-    $cmd_mkdir \
-    "$cfg_dir_toolchain_sysroot/ns2/DESERT_lib/lib" &&
-
-    $cmd_make \
-        DESTDIR="$cfg_dir_toolchain_sysroot/ns2/" \
-        install
-
-}
-
-target_install()
-{
-    cp -r "${cfg_dir_toolchain_sysroot}/ns2/DESERT_lib/lib" "${cfg_dir_rootfs}/usr/ns2/DESERT/"
-
-    for f in "$cfg_dir_toolchain_sysroot/ns2/DESERT_lib/lib/"lib*.so.0.0.0; do
-        $cmd_target_strip "$f" -o ${cfg_dir_rootfs}/usr/ns2/DESERT/"$(basename "$f")"
-    done
-
-}

rules/desert/patches/000-lib.patch

@@ -1,19 +0,0 @@
---- ./m4/nsallinone.m4	2012-09-21 14:09:26.000000000 +0200
-+++ ./m4/nsallinone.m4	2012-09-21 17:08:21.807075643 +0200
-@@ -49,12 +49,10 @@
- 		NS_ALLINONE_PATH=$withval
- 
- 		NS_PATH=$NS_ALLINONE_PATH/`cd $NS_ALLINONE_PATH; ls -d ns-* | head -n 1`
--		TCL_PATH=$NS_ALLINONE_PATH/`cd $NS_ALLINONE_PATH; ls -d * | grep -e 'tcl[0-9].*' | head -n 1`
--		TCLCL_PATH=$NS_ALLINONE_PATH/`cd $NS_ALLINONE_PATH; ls -d tclcl-* | head -n 1`
--		OTCL_PATH=$NS_ALLINONE_PATH/`cd $NS_ALLINONE_PATH; ls -d otcl-* | head -n 1`
--
--		NS_CPPFLAGS="-I$NS_ALLINONE_PATH/include -I$NS_PATH -I$TCLCL_PATH -I$OTCL_PATH"
--
-+		TCL_PATH="${cfg_dir_builds}/tcl/"`cd "${cfg_dir_builds}/tcl/"; ls -d * | grep -e 'tcl[0-9].*' | head -n 1`
-+		TCLCL_PATH="${cfg_dir_builds}/tclcl/"`cd "${cfg_dir_builds}/tclcl"; ls -d tclcl-* | head -n 1`
-+		OTCL_PATH="${cfg_dir_builds}/otcl/"`cd "${cfg_dir_builds}/otcl/"; ls -d otcl-* | head -n 1`
-+		NS_CPPFLAGS="${cfg_dir_toolchain_sysroot}/usr/include -I$NS_PATH -I$TCLCL_PATH -I$OTCL_PATH"
- 
- 		NS_ALLINONE_DISTCHECK_CONFIGURE_FLAGS="--with-ns-allinone=$withval"
- 		AC_SUBST(NS_ALLINONE_DISTCHECK_CONFIGURE_FLAGS)

rules/desert/patches/001-lib.patch

@@ -1,11 +0,0 @@
---- configure.ac	2012-09-27 11:57:58.190424449 +0200
-+++ configure.ac	2012-09-27 12:03:02.599357310 +0200
-@@ -42,6 +42,8 @@
- DESERT_CPPFLAGS="$DESERT_CPPFLAGS "'-I$(top_srcdir)/mobility/uwdriftposition'
- DESERT_CPPFLAGS="$DESERT_CPPFLAGS "'-I$(top_srcdir)/mobility/uwgmposition'
- 
-+TCL2CPP="qemu-arm -L ${cfg_dir_rootfs} ${cfg_dir_rootfs}/lib/ld-linux.so.3 ${cfg_dir_toolchain_sysroot}/usr/bin/tcl2c++"
-+
- AC_SUBST(DESERT_CPPFLAGS) 
- 
- AC_SUBST(DESERT_LDFLAGS) 

rules/dnsmasq/default.bash

@@ -26,5 +26,6 @@ build()
 
 target_install()
 {
-    $cmd_target_strip src/dnsmasq -o "$cfg_dir_rootfs/usr/sbin/dnsmasq"
+    $cmd_target_strip src/dnsmasq -o "$cfg_dir_rootfs/usr/sbin/dnsmasq" &&
+    tar -C "$pkg_dir/fs" -c -f - . | tar -C "$cfg_dir_rootfs" -x -v -f -
 }

rules/dnsmasq/fs/etc/rc.d/dnsmasq

@@ -0,0 +1,10 @@
+start()
+{
+    mkdir -p /var/lib/misc
+    dnsmasq
+}
+
+stop()
+{
+    killall dnsmasq
+}

rules/dosfstools/common.bash

@@ -0,0 +1,24 @@
+version=\
+(
+    '3.0.28'
+)
+
+url=\
+(
+    "https://github.com/dosfstools/dosfstools/releases/download/v$version/dosfstools-$version.tar.xz"
+)
+
+md5=\
+(
+    '6a047a6c65186b9ebb1853709adb36db'
+)
+
+maintainer=\
+(
+    'Ricardo Martins <rasm@fe.up.pt>'
+)
+
+configure()
+{
+    $cmd_make distclean
+}

rules/dosfstools/default.bash

@@ -0,0 +1,17 @@
+source $pkg_common
+
+build()
+{
+    CC="$cmd_target_cc" \
+      $cmd_make \
+      PREFIX="$cfg_dir_toolchain_sysroot/usr"
+}
+
+target_install()
+{
+    $cmd_target_strip --strip-unneeded "../dosfstools-$version/mkfs.fat" -o "$cfg_dir_rootfs/sbin/mkfs.fat" &&
+    $cmd_target_strip --strip-unneeded "../dosfstools-$version/fsck.fat" -o "$cfg_dir_rootfs/sbin/fsck.fat" &&
+    $cmd_target_strip --strip-unneeded "../dosfstools-$version/fatlabel" -o "$cfg_dir_rootfs/sbin/fatlabel" &&
+    ln -fs mkfs.fat "$cfg_dir_rootfs/sbin/mkfs.vfat" &&
+    ln -fs fsck.fat "$cfg_dir_rootfs/sbin/fsck.vfat"
+}

rules/dosfstools/host.bash

@@ -1,22 +1,4 @@
-version=\
-(
-    '3.0.20'
-)
-
-url=\
-(
-    "http://daniel-baumann.ch/files/software/dosfstools/dosfstools-$version.tar.gz"
-)
-
-md5=\
-(
-    '7f1c1afd4ae4622e07b24ec0ddfc4184'
-)
-
-maintainer=\
-(
-    'Ricardo Martins <rasm@fe.up.pt>'
-)
+source $pkg_common
 
 build()
 {

rules/dropbear/default.bash

@@ -1,6 +1,6 @@
 version=\
 (
-    '2012.55'
+    '2015.67'
 )
 
 url=\
@@ -10,7 +10,7 @@ url=\
 
 md5=\
 (
-    '8c784baec3054cdb1bb4bfa792c87812'
+    'e967e320344cd4bfebe321e3ab8514d6'
 )
 
 maintainer=\
@@ -43,7 +43,7 @@ configure()
         --target="$cfg_target_canonical" \
         --host="$cfg_target_canonical" \
         --build="$cfg_host_canonical" \
-        --with-zlib="$cfg_dir_toolchain"
+        --with-zlib="$cfg_dir_toolchain_sysroot/usr"
 }
 
 build()

rules/dropbear/patches/000-cryptlib-link.patch

@@ -1,30 +0,0 @@
-diff --git a/Makefile.in b/Makefile.in
-index cec35f1..46a9365 100644
---- a/Makefile.in
-+++ b/Makefile.in
-@@ -56,7 +56,7 @@ HEADERS=options.h dbutil.h session.h packet.h algo.h ssh.h buffer.h kex.h \
- 		loginrec.h atomicio.h x11fwd.h agentfwd.h tcpfwd.h compat.h \
- 		listener.h fake-rfc2553.h
- 
--dropbearobjs=$(COMMONOBJS) $(CLISVROBJS) $(SVROBJS) @CRYPTLIB@ 
-+dropbearobjs=$(COMMONOBJS) $(CLISVROBJS) $(SVROBJS) 
- dbclientobjs=$(COMMONOBJS) $(CLISVROBJS) $(CLIOBJS)
- dropbearkeyobjs=$(COMMONOBJS) $(KEYOBJS)
- dropbearconvertobjs=$(COMMONOBJS) $(CONVERTOBJS)
-@@ -169,14 +169,14 @@ scp: $(SCPOBJS)  $(HEADERS) Makefile
- # multi-binary compilation.
- MULTIOBJS=
- ifeq ($(MULTI),1)
--	MULTIOBJS=dbmulti.o $(sort $(foreach prog, $(PROGRAMS), $($(prog)objs))) @CRYPTLIB@ 
-+	MULTIOBJS=dbmulti.o $(sort $(foreach prog, $(PROGRAMS), $($(prog)objs))) 
- 	CFLAGS+=$(addprefix -DDBMULTI_, $(PROGRAMS)) -DDROPBEAR_MULTI
- endif
- 
- dropbearmulti: multilink 
- 
- multibinary: $(HEADERS) $(MULTIOBJS) $(LIBTOM_DEPS) Makefile
--	$(CC) $(LDFLAGS) -o dropbearmulti$(EXEEXT) $(MULTIOBJS) $(LIBS)
-+	$(CC) $(LDFLAGS) -o dropbearmulti$(EXEEXT) $(MULTIOBJS) $(LIBS) @CRYPTLIB@
- 
- multilink: multibinary $(addprefix link, $(PROGRAMS))
- 

rules/dtn/default.bash

@@ -1,80 +0,0 @@
-version=\
-(
-    '2.9.0'
-)
-
-url=\
-(
-    "http://downloads.sourceforge.net/dtn/dtn-$version.tgz"
-)
-
-md5=\
-(
-    'adfc25b561c1eeda30d9b68a6b088bd8'
-)
-
-maintainer=\
-(
-    'Ricardo Martins <rasm@fe.up.pt>'
-)
-
-requires=\
-(
-    'db/default'
-    'tcl/default'
-    'xerces-c/default'
-    'oasys/default'
-)
-
-configure()
-{
-    "../dtn-$version/configure" \
-        --prefix="/usr" \
-        --sysconfdir="/etc/dtn" \
-        --target="$cfg_target_canonical" \
-        --host="$cfg_target_canonical" \
-        --build="$cfg_host_canonical" \
-        --with-oasys="$cfg_dir_toolchain_sysroot/usr" \
-        --enable-ecl \
-        --without-python \
-        --disable-python
-}
-
-build()
-{
-    $cmd_make -j1 -C servlib &&
-    $cmd_make -j1 -C applib libdtnapi.a &&
-    $cmd_make -j1 -C applib libdtnapi++.a &&
-    $cmd_make -j1 -C applib libdtnapisrv.a &&
-    $cmd_make -j1 -C daemon &&
-    $cmd_make -j1 -C apps
-}
-
-host_install()
-{
-    cp -a servlib/libdtnserv.a "$cfg_dir_toolchain_sysroot/usr/lib" &&
-    cp -a applib/libdtnapi++.a "$cfg_dir_toolchain_sysroot/usr/lib" &&
-    cp -a applib/libdtnapi++-$version.a "$cfg_dir_toolchain_sysroot/usr/lib" &&
-    cp -a applib/libdtnapi-$version.a "$cfg_dir_toolchain_sysroot/usr/lib" &&
-    cp -a applib/libdtnapi.a "$cfg_dir_toolchain_sysroot/usr/lib" &&
-    cp -a applib/libdtnapisrv.a "$cfg_dir_toolchain_sysroot/usr/lib" &&
-
-    mkdir -p "$cfg_dir_toolchain_sysroot/usr/include/dtn" &&
-    cp -a applib/dtn_ipc.h "$cfg_dir_toolchain_sysroot/usr/include/dtn" &&
-    cp -a applib/dtn_errno.h "$cfg_dir_toolchain_sysroot/usr/include/dtn" &&
-    cp -a applib/sdnv-c.h "$cfg_dir_toolchain_sysroot/usr/include/dtn" &&
-    cp -a applib/dtn_api.h "$cfg_dir_toolchain_sysroot/usr/include/dtn" &&
-    cp -a applib/dtn_types.h "$cfg_dir_toolchain_sysroot/usr/include/dtn"
-}
-
-target_install()
-{
-    $cmd_target_strip apps/dtnsend/dtnsend -o "$cfg_dir_rootfs/usr/bin/dtnsend" &&
-    $cmd_target_strip apps/dtnrecv/dtnrecv -o "$cfg_dir_rootfs/usr/bin/dtnrecv" &&
-    $cmd_target_strip apps/dtncp/dtncp -o "$cfg_dir_rootfs/usr/bin/dtncp" &&
-    $cmd_target_strip apps/dtnping/dtnping -o "$cfg_dir_rootfs/usr/bin/dtnping" &&
-    $cmd_target_strip daemon/dtnd -o "$cfg_dir_rootfs/usr/bin/dtnd" &&
-    $cmd_mkdir "$cfg_dir_rootfs/etc/dtn" "$cfg_dir_rootfs/usr/share/dtn" &&
-    cp servlib/conv_layers/clevent.xsd "$cfg_dir_rootfs/usr/share/dtn" &&
-    tar -C "$pkg_dir/fs" --exclude .svn -c -f - . | tar -C "$cfg_dir_rootfs" -x -v -f -
-}

rules/dtn/fs/etc/rc.d/dtnd

@@ -1,29 +0,0 @@
-# Configuration parameters
-# cfg_dtnd_config: DTN Daemon configuration file.
-# cfg_dtnd_name: DTN node name.
-
-start()
-{
-    export DTN_NODE="$cfg_dtnd_name"
-    db="/opt/lsts/dtn/var/$DTN_NODE/db"
-
-    if [ -f "$cfg_dtnd_config" ]; then
-        mkdir -p /opt/lsts/dtn
-
-        if ! [ -d "$db" ]; then
-            mkdir -p "$db"
-            /usr/bin/dtnd \
-                -c "$cfg_dtnd_config" \
-                --init-db
-        fi
-
-        /usr/bin/dtnd -d \
-            -c "$cfg_dtnd_config" \
-            -o /opt/lsts/dtn/log.txt
-    fi
-}
-
-stop()
-{
-    killall dtnd > /dev/null 2>&1
-}

rules/e2fsprogs/common.bash

@@ -0,0 +1,14 @@
+version=\
+(
+    '1.42.13'
+)
+
+url=\
+(
+    "http://downloads.sourceforge.net/e2fsprogs/e2fsprogs-$version.tar.gz"
+)
+
+md5=\
+(
+    'bc759fc62666786f5436e2075beb3265'
+)

rules/e2fsprogs/default.bash

@@ -1,20 +1,9 @@
-version=\
-(
-    '1.41.9'
-)
-
-url=\
-(
-    "http://downloads.sourceforge.net/e2fsprogs/e2fsprogs-$version.tar.gz"
-)
-
-md5=\
-(
-    '52f60a9e19a02f142f5546f1b5681927'
-)
+source "$pkg_common"
 
 configure()
 {
+    $cmd_make distclean
+
     export CC=$cmd_target_cc
     export CROSS_COMPILE=$cfg_target_canonical
     "../e2fsprogs-$version/configure" \
@@ -31,7 +20,13 @@ build()
 
 target_install()
 {
-    $cmd_target_strip --strip-unneeded ../e2fsprogs-$version/e2fsck/e2fsck -o $cfg_dir_rootfs/sbin/e2fsck &&
-    $cmd_target_strip --strip-unneeded ../e2fsprogs-$version/misc/mke2fs -o $cfg_dir_rootfs/sbin/mke2fs &&
-    $cmd_target_strip --strip-unneeded ../e2fsprogs-$version/misc/tune2fs -o $cfg_dir_rootfs/sbin/tune2fs
+    $cmd_target_strip --strip-unneeded ../e2fsprogs-$version/e2fsck/e2fsck -o "$cfg_dir_rootfs/sbin/e2fsck" &&
+    $cmd_target_strip --strip-unneeded ../e2fsprogs-$version/misc/mke2fs -o "$cfg_dir_rootfs/sbin/mke2fs" &&
+    $cmd_target_strip --strip-unneeded ../e2fsprogs-$version/misc/tune2fs -o "$cfg_dir_rootfs/sbin/tune2fs" &&
+    ln -fs e2fsck "$cfg_dir_rootfs/sbin/fsck.ext2" &&
+    ln -fs e2fsck "$cfg_dir_rootfs/sbin/fsck.ext3" &&
+    ln -fs e2fsck "$cfg_dir_rootfs/sbin/fsck.ext4" &&
+    ln -fs mke2fs "$cfg_dir_rootfs/sbin/mkfs.ext2" &&
+    ln -fs mke2fs "$cfg_dir_rootfs/sbin/mkfs.ext3" &&
+    ln -fs mke2fs "$cfg_dir_rootfs/sbin/mkfs.ext4"
 }

rules/e2fsprogs/host.bash

@@ -0,0 +1,22 @@
+source "$pkg_common"
+
+configure()
+{
+    $cmd_make distclean
+
+    "../e2fsprogs-$version/configure" \
+        --prefix="$cfg_dir_toolchain" \
+        --disable-shared \
+        --enable-static \
+        --disable-nls
+}
+
+build()
+{
+    $cmd_make
+}
+
+host_install()
+{
+    $cmd_make install
+}

rules/eglibc/files/timepps.h

@@ -1,199 +0,0 @@
-/*
- * timepps.h -- PPS API main header
- *
- * Copyright (C) 2005-2007   Rodolfo Giometti <giometti@linux.it>
- *
- *   This program is free software; you can redistribute it and/or modify
- *   it under the terms of the GNU General Public License as published by
- *   the Free Software Foundation; either version 2 of the License, or
- *   (at your option) any later version.
- *
- *   This program is distributed in the hope that it will be useful,
- *   but WITHOUT ANY WARRANTY; without even the implied warranty of
- *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *   GNU General Public License for more details.
- *
- *   You should have received a copy of the GNU General Public License
- *   along with this program; if not, write to the Free Software
- *   Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#ifndef _SYS_TIMEPPS_H_
-#define _SYS_TIMEPPS_H_
-
-#include <unistd.h>
-#include <errno.h>
-#include <sys/time.h>
-#include <sys/ioctl.h>
-#include <linux/types.h>
-#include <linux/pps.h>
-
-#define LINUXPPS	1		/* signal we are using LinuxPPS */
-
-/*
- * New data structures
- */
-
-struct ntp_fp {
-	unsigned int integral;
-	unsigned int fractional;
-};
-
-union pps_timeu {
-	struct timespec tspec;
-	struct ntp_fp ntpfp;
-	unsigned long longpad[3];
-};
-
-struct pps_info {
-	unsigned long assert_sequence;	/* seq. num. of assert event */
-	unsigned long clear_sequence;	/* seq. num. of clear event */
-	union pps_timeu assert_tu;	/* time of assert event */
-	union pps_timeu clear_tu;	/* time of clear event */
-	int current_mode;		/* current mode bits */
-};
-
-struct pps_params {
-	int api_version;		/* API version # */
-	int mode;			/* mode bits */
-	union pps_timeu assert_off_tu;	/* offset compensation for assert */
-	union pps_timeu clear_off_tu;	/* offset compensation for clear */
-};
-
-typedef int pps_handle_t;		/* represents a PPS source */
-typedef unsigned long pps_seq_t;	/* sequence number */
-typedef struct ntp_fp ntp_fp_t;		/* NTP-compatible time stamp */
-typedef union pps_timeu pps_timeu_t;	/* generic data type for time stamps */
-typedef struct pps_info pps_info_t;
-typedef struct pps_params pps_params_t;
-
-#define assert_timestamp        assert_tu.tspec
-#define clear_timestamp         clear_tu.tspec
-
-#define assert_timestamp_ntpfp  assert_tu.ntpfp
-#define clear_timestamp_ntpfp   clear_tu.ntpfp
-
-#define assert_offset		assert_off_tu.tspec
-#define clear_offset		clear_off_tu.tspec
-
-#define assert_offset_ntpfp     assert_off_tu.ntpfp
-#define clear_offset_ntpfp      clear_off_tu.ntpfp
-
-/*
- * The PPS API
- */
-
-static __inline int time_pps_create(int source, pps_handle_t *handle)
-{
-	int ret;
-	struct pps_kparams dummy;
-
-	if (!handle) {
-		errno = EINVAL;
-		return -1;
-	}
-
-	/* First we check if current device is a valid PPS one by
-	 * doing a dummy PPS_GETPARAMS...
-	 */
-	ret = ioctl(source, PPS_GETPARAMS, &dummy);
-	if (ret) {
-		errno = EOPNOTSUPP;
-		return -1;
-	}
-
-	/* ... then since in LinuxPPS there are no differences between a
-	 * "PPS source" and a "PPS handle", we simply return the same value.
-	 */
-	*handle = source;
-
-	return 0;
-}
-
-static __inline int time_pps_destroy(pps_handle_t handle)
-{
-	return close(handle);
-}
-
-static __inline int time_pps_getparams(pps_handle_t handle,
-					pps_params_t *ppsparams)
-{
-	int ret;
-	struct pps_kparams __ppsparams;
-
-	ret = ioctl(handle, PPS_GETPARAMS, &__ppsparams);
-
-	ppsparams->api_version = __ppsparams.api_version;
-	ppsparams->mode = __ppsparams.mode;
-	ppsparams->assert_off_tu.tspec.tv_sec = __ppsparams.assert_off_tu.sec;
-	ppsparams->assert_off_tu.tspec.tv_nsec = __ppsparams.assert_off_tu.nsec;
-	ppsparams->clear_off_tu.tspec.tv_sec = __ppsparams.clear_off_tu.sec;
-	ppsparams->clear_off_tu.tspec.tv_nsec = __ppsparams.clear_off_tu.nsec;
-
-	return ret;
-}
-
-static __inline int time_pps_setparams(pps_handle_t handle,
-					const pps_params_t *ppsparams)
-{
-	struct pps_kparams __ppsparams;
-
-	__ppsparams.api_version = ppsparams->api_version;
-	__ppsparams.mode = ppsparams->mode;
-	__ppsparams.assert_off_tu.sec = ppsparams->assert_off_tu.tspec.tv_sec;
-	__ppsparams.assert_off_tu.nsec = ppsparams->assert_off_tu.tspec.tv_nsec;
-	__ppsparams.clear_off_tu.sec = ppsparams->clear_off_tu.tspec.tv_sec;
-	__ppsparams.clear_off_tu.nsec = ppsparams->clear_off_tu.tspec.tv_nsec;
-
-	return ioctl(handle, PPS_SETPARAMS, &__ppsparams);
-}
-
-/* Get capabilities for handle */
-static __inline int time_pps_getcap(pps_handle_t handle, int *mode)
-{
-	return ioctl(handle, PPS_GETCAP, mode);
-}
-
-static __inline int time_pps_fetch(pps_handle_t handle, const int tsformat,
-					pps_info_t *ppsinfobuf,
-					const struct timespec *timeout)
-{
-	struct pps_fdata __fdata;
-	int ret;
-
-	/* Sanity checks */
-	if (tsformat != PPS_TSFMT_TSPEC) {
-		errno = EINVAL;
-		return -1;
-	}
-
-	if (timeout) {
-		__fdata.timeout.sec = timeout->tv_sec;
-		__fdata.timeout.nsec = timeout->tv_nsec;
-		__fdata.timeout.flags = ~PPS_TIME_INVALID;
-	} else
-		__fdata.timeout.flags = PPS_TIME_INVALID;
-
-	ret = ioctl(handle, PPS_FETCH, &__fdata);
-
-	ppsinfobuf->assert_sequence = __fdata.info.assert_sequence;
-	ppsinfobuf->clear_sequence = __fdata.info.clear_sequence;
-	ppsinfobuf->assert_tu.tspec.tv_sec = __fdata.info.assert_tu.sec;
-	ppsinfobuf->assert_tu.tspec.tv_nsec = __fdata.info.assert_tu.nsec;
-	ppsinfobuf->clear_tu.tspec.tv_sec = __fdata.info.clear_tu.sec;
-	ppsinfobuf->clear_tu.tspec.tv_nsec = __fdata.info.clear_tu.nsec;
-	ppsinfobuf->current_mode = __fdata.info.current_mode;
-
-	return ret;
-}
-
-static __inline int time_pps_kcbind(pps_handle_t handle,
-					const int kernel_consumer,
-					const int edge, const int tsformat)
-{
-	/* LinuxPPS doesn't implement kernel consumer feature */
-	errno = EOPNOTSUPP;
-	return -1;
-}
-
-#endif				/* _SYS_TIMEPPS_H_ */

rules/eglibc/locales.bash

@@ -1,39 +0,0 @@
-source $pkg_common
-
-requires=\
-(
-    'eglibc/cross'
-)
-
-configure()
-{
-    "../eglibc-$version/localedef/configure" \
-        --prefix="$cfg_dir_toolchain_sysroot/usr" \
-        --with-glibc=."./eglibc-$version/libc"
-}
-
-build()
-{
-    $cmd_make
-}
-
-host_install()
-{
-    $cmd_mkdir "$cfg_dir_toolchain_sysroot/usr/lib/locale" &&
-    if [ -f "$cfg_dir_toolchain_sysroot/usr/share/i18n/charmaps/UTF-8.gz" ]; then
-        gunzip -f "$cfg_dir_toolchain_sysroot/usr/share/i18n/charmaps/UTF-8.gz"
-    fi &&
-    if [ -f "$cfg_dir_toolchain_sysroot/usr/share/i18n/charmaps/ISO-8859-1.gz" ]; then
-        gunzip -f "$cfg_dir_toolchain_sysroot/usr/share/i18n/charmaps/ISO-8859-1.gz"
-    fi &&
-
-    ./localedef -v -c -i pt_PT -f UTF-8 pt_PT
-    ./localedef -v -c -i ru_RU -f UTF-8 ru_RU
-    true
-}
-
-target_install()
-{
-    $cmd_mkdir "$cfg_dir_rootfs/usr/lib/locale" &&
-    cp -v "$cfg_dir_toolchain_sysroot/usr/lib/locale/locale-archive" "$cfg_dir_rootfs/usr/lib/locale"
-}

rules/eglibc/patches/000-reexport-rpc-interface.patch

@@ -1,24 +0,0 @@
-diff -Nru eglibc-2.15-16611/libc/include/libc-symbols.h eglibc-2.15-16611-rasm/libc/include/libc-symbols.h
---- eglibc-2.15-16611/libc/include/libc-symbols.h	2012-01-09 21:16:30.000000000 +0000
-+++ eglibc-2.15-16611-rasm/libc/include/libc-symbols.h	2012-01-10 23:37:36.863616530 +0000
-@@ -647,7 +647,7 @@
- # define libc_hidden_proto(name, attrs...) hidden_proto (name, ##attrs)
- # define libc_hidden_def(name) hidden_def (name)
- # define libc_hidden_weak(name) hidden_weak (name)
--# define libc_hidden_nolink(name, version) hidden_nolink (name, libc, version)
-+# define libc_hidden_nolink(name, version) hidden_def (name)
- # define libc_hidden_ver(local, name) hidden_ver (local, name)
- # define libc_hidden_data_def(name) hidden_data_def (name)
- # define libc_hidden_data_weak(name) hidden_data_weak (name)
-diff -Nru eglibc-2.15-16611/libc/sunrpc/Makefile eglibc-2.15-16611-rasm/libc/sunrpc/Makefile
---- eglibc-2.15-16611/libc/sunrpc/Makefile	2012-01-09 21:16:30.000000000 +0000
-+++ eglibc-2.15-16611-rasm/libc/sunrpc/Makefile	2012-01-10 23:38:14.574076188 +0000
-@@ -55,7 +55,7 @@
- 				    des_crypt.h)
- headers-not-in-tirpc = $(addprefix rpc/,key_prot.h rpc_des.h) \
- 		       $(rpcsvc:%=rpcsvc/%) rpcsvc/bootparam.h
--headers = rpc/netdb.h
-+headers = rpc/netdb.h $(headers-in-tirpc) $(headers-not-in-tirpc)
- generated = $(rpcsvc:%.x=rpcsvc/%.h) $(rpcsvc:%.x=x%.c) $(rpcsvc:%.x=x%.stmp) \
- 	    $(rpcsvc:%.x=rpcsvc/%.stmp) rpcgen
- generated-dirs := rpcsvc

rules/eglibc/patches/001-reinstall-nis-rpc-headers.patch

@@ -1,15 +0,0 @@
-diff -Nru eglibc-2.15-16611/libc/nis/Makefile eglibc-2.15-16611-rasm/libc/nis/Makefile
---- eglibc-2.15-16611/libc/nis/Makefile	2012-01-09 21:16:30.000000000 +0000
-+++ eglibc-2.15-16611-rasm/libc/nis/Makefile	2012-01-10 23:40:26.409018009 +0000
-@@ -25,9 +25,9 @@
- 
- aux			:= nis_hash
- 
-+headers			:= $(wildcard rpcsvc/*.[hx])
- distribute		:= nss-nis.h nss-nisplus.h nis_intern.h Banner \
--			   nisplus-parser.h nis_xdr.h nss \
--			   $(wildcard rpcsvc/*.[hx])
-+			   nisplus-parser.h nis_xdr.h nss 
- 
- # These are the databases available for the nis (and perhaps later nisplus)
- # service.  This must be a superset of the services in nss.

rules/eglibc/patches/002-dl-close-fix.patch

@@ -1,107 +0,0 @@
-diff -Nru eglibc-2.15.17955/libc/elf/dl-close.c eglibc-2.15.17955.rasm/libc/elf/dl-close.c
---- eglibc-2.15.17955/libc/elf/dl-close.c	2012-04-07 20:58:55.000000000 +0100
-+++ eglibc-2.15.17955.rasm/libc/elf/dl-close.c	2012-10-23 22:33:33.351846745 +0100
-@@ -119,17 +119,8 @@
-   if (map->l_direct_opencount > 0 || map->l_type != lt_loaded
-       || dl_close_state != not_pending)
-     {
--      if (map->l_direct_opencount == 0)
--	{
--	  if (map->l_type == lt_loaded)
--	    dl_close_state = rerun;
--	  else if (map->l_type == lt_library)
--	    {
--	      struct link_map **oldp = map->l_initfini;
--	      map->l_initfini = map->l_orig_initfini;
--	      _dl_scope_free (oldp);
--	    }
--	}
-+      if (map->l_direct_opencount == 0 && map->l_type == lt_loaded)
-+        dl_close_state = rerun;
- 
-       /* There are still references to this object.  Do nothing more.  */
-       if (__builtin_expect (GLRO_dl_debug_mask & DL_DEBUG_FILES, 0))
-diff -Nru eglibc-2.15.17955/libc/elf/dl-deps.c eglibc-2.15.17955.rasm/libc/elf/dl-deps.c
---- eglibc-2.15.17955/libc/elf/dl-deps.c	2012-04-07 20:58:55.000000000 +0100
-+++ eglibc-2.15.17955.rasm/libc/elf/dl-deps.c	2012-10-23 22:38:17.124208092 +0100
-@@ -689,6 +689,7 @@
-   l_initfini[nlist] = NULL;
-   atomic_write_barrier ();
-   map->l_initfini = l_initfini;
-+  map->l_free_initfini = 1;
-   if (l_reldeps != NULL)
-     {
-       atomic_write_barrier ();
-@@ -697,7 +698,7 @@
-       _dl_scope_free (old_l_reldeps);
-     }
-   if (old_l_initfini != NULL)
--      map->l_orig_initfini = old_l_initfini;
-+    _dl_scope_free (old_l_initfini);
- 
-   if (errno_reason)
-     _dl_signal_error (errno_reason == -1 ? 0 : errno_reason, objname,
-diff -Nru eglibc-2.15.17955/libc/elf/dl-libc.c eglibc-2.15.17955.rasm/libc/elf/dl-libc.c
---- eglibc-2.15.17955/libc/elf/dl-libc.c	2012-04-07 20:58:55.000000000 +0100
-+++ eglibc-2.15.17955.rasm/libc/elf/dl-libc.c	2012-10-23 22:39:02.388449874 +0100
-@@ -270,13 +270,13 @@
- 
-   for (Lmid_t ns = 0; ns < GL(dl_nns); ++ns)
-     {
--      /* Remove all additional names added to the objects.  */
-       for (l = GL(dl_ns)[ns]._ns_loaded; l != NULL; l = l->l_next)
- 	{
- 	  struct libname_list *lnp = l->l_libname->next;
- 
- 	  l->l_libname->next = NULL;
- 
-+          /* Remove all additional names added to the objects.  */
- 	  while (lnp != NULL)
- 	    {
- 	      struct libname_list *old = lnp;
-@@ -284,6 +284,10 @@
- 	      if (! old->dont_free)
- 		free (old);
- 	    }
-+
-+          /* Free the initfini dependency list.  */
-+          if (l->l_free_initfini)
-+            free (l->l_initfini);
- 	}
- 
-       if (__builtin_expect (GL(dl_ns)[ns]._ns_global_scope_alloc, 0) != 0
-diff -Nru eglibc-2.15.17955/libc/elf/rtld.c eglibc-2.15.17955.rasm/libc/elf/rtld.c
---- eglibc-2.15.17955/libc/elf/rtld.c	2012-04-07 20:58:55.000000000 +0100
-+++ eglibc-2.15.17955.rasm/libc/elf/rtld.c	2012-10-23 22:39:30.692348894 +0100
-@@ -2277,6 +2277,8 @@
- 	      lnp->dont_free = 1;
- 	      lnp = lnp->next;
- 	    }
-+          /* Also allocated with the fake malloc().  */
-+          l->l_free_initfini = 0;
- 
- 	  if (l != &GL(dl_rtld_map))
- 	    _dl_relocate_object (l, l->l_scope, GLRO(dl_lazy) ? RTLD_LAZY : 0,
-diff -Nru eglibc-2.15.17955/libc/include/link.h eglibc-2.15.17955.rasm/libc/include/link.h
---- eglibc-2.15.17955/libc/include/link.h	2012-04-07 20:58:55.000000000 +0100
-+++ eglibc-2.15.17955.rasm/libc/include/link.h	2012-10-23 22:40:31.526900046 +0100
-@@ -192,6 +192,9 @@
- 						 during LD_TRACE_PRELINKING=1
- 						 contains any DT_SYMBOLIC
- 						 libraries.  */
-+    unsigned int l_free_initfini:1; /* Nonzero if l_initfini can be
-+                                       freed, ie. not allocated with
-+                                       the dummy malloc in ld.so.  */
- 
-     /* Collected information about own RPATH directories.  */
-     struct r_search_path_struct l_rpath_dirs;
-@@ -240,9 +243,6 @@
- 
-     /* List of object in order of the init and fini calls.  */
-     struct link_map **l_initfini;
--    /* The init and fini list generated at startup, saved when the
--       object is also loaded dynamically.  */
--    struct link_map **l_orig_initfini;
- 
-     /* List of the dependencies introduced through symbol binding.  */
-     struct link_map_reldeps

rules/eglibc/patches/003-make382-install_root.patch

@@ -1,12 +0,0 @@
-diff -Naur eglibc-2.15-16526.orig/config.make.in eglibc-2.15-16526/config.make.in
---- eglibc-2.15-16526.orig/libc/config.make.in	2012-07-24 17:49:58.000000000 -0400
-+++ eglibc-2.15-16526/libc/config.make.in	2012-07-24 17:51:01.000000000 -0400
-@@ -5,7 +5,7 @@
- release = @RELEASE@
-
- # Installation prefixes.
--install_root = $(DESTDIR)
-+install_root ?= $(DESTDIR)
- prefix = @prefix@
- exec_prefix = @exec_prefix@
- datadir = @datadir@

rules/ejre_armhf/default.bash

@@ -0,0 +1,21 @@
+version=\
+(
+    '1.8.0_51'
+)
+
+url=\
+(
+    "https://github.com/zepinto/glued_pkg/raw/master/ejre_armhf_$version.tar.bz2"
+)
+
+md5=\
+(
+    'c1619ad3fe3c069cbb09064711f4f9e4'
+)
+
+target_install()
+{
+    $cmd_mkdir "$cfg_dir_rootfs/usr/share/java" &&
+    $cmd_cp "../ejre$version/"* "$cfg_dir_rootfs/usr/share/java" &&
+    ln -rs "$cfg_dir_rootfs/usr/share/java/bin/java" "$cfg_dir_rootfs/usr/bin/java"
+}

rules/emm-8p-xt-eeprom/default.bash

@@ -0,0 +1,30 @@
+version=\
+(
+    '1.0.0'
+)
+
+url=\
+(
+    "http://www.lsts.pt/glued/emm-8p-xt-eeprom-$version.tar.gz"
+)
+
+md5=\
+(
+    '6a71321ad9ea385c9a7c9b53d930d09d'
+)
+
+if [ -d "$cfg_dir_builds/linux/linux-"* ]; then
+    kernel="$(echo $cfg_dir_builds/linux/linux-*)"
+fi
+
+build()
+{
+    $cmd_make CC=$cmd_target_cc
+}
+
+target_install()
+{
+    for f in emm-8p-xt-eeprom-lauv; do
+        $cmd_target_strip "$f" -o "$cfg_dir_rootfs/usr/bin/$f"
+    done
+}

rules/escc/default.bash

@@ -1,6 +1,6 @@
 version=\
 (
-    '1.0.4'
+    '1.0.6'
 )
 
 url=\
@@ -10,7 +10,7 @@ url=\
 
 md5=\
 (
-    'b9ee6a3d921643535c336b7c740b2c60'
+    '07783e66e27601ab0a8250c328b3d6bf'
 )
 
 if [ -d "$cfg_dir_builds/linux/linux-"* ]; then
@@ -25,7 +25,7 @@ build()
         M=`pwd` \
         -C "$kernel" &&
 
-    for util in setescc esccclock esccsettings; do
+    for util in setescc esccclock esccsettings esccfs6131; do
         make CC="$cmd_target_cc" -C "utils/$util"
     done
 }
@@ -40,7 +40,7 @@ target_install()
         -C "$kernel" \
         modules_install &&
 
-    for util in setescc esccclock esccsettings; do
+    for util in setescc esccclock esccsettings esccfs6131; do
         $cmd_target_strip "utils/$util/$util" -o "$cfg_dir_rootfs/usr/bin/$util"
     done &&
 

rules/escc/fs/etc/escc/hg1700-psimar.sh

@@ -1,9 +1,15 @@
-# IMU
-/usr/bin/setescc 0 0x200 5 0 0 0
-/usr/bin/esccclock 0 0x5d1460 23
-/usr/bin/esccsettings 0 /etc/escc/hg1700.cfg
+# Channels:
+# * 0: Honeywell HG1700
+# * 1: LSTS PSIMAR
 
-# PSIMAR
+# Create channels.
+/usr/bin/setescc 0 0x200 5 0 0 0
 /usr/bin/setescc 1 0x200 5 0 0 1
+
+# Set clocks (Hz).
+"$cmd_escc_set_clock" 0 1000000
+"$cmd_escc_set_clock" 1 25804800
+
+# Set registers.
+/usr/bin/esccsettings 0 /etc/escc/hg1700.cfg
 /usr/bin/esccsettings 1 /etc/escc/psimar.cfg
-/usr/bin/esccclock 1 0xc8920 22

rules/escc/fs/etc/escc/hg1700.sh

@@ -1,3 +1,11 @@
+# Channels:
+# * 0: Honeywell HG1700
+
+# Create channels.
 /usr/bin/setescc 0 0x200 5 0 0 0
-/usr/bin/esccclock 0 0x5d1460 23
+
+# Set clocks (Hz).
+"$cmd_escc_set_clock" 0 1000000
+
+# Set registers.
 /usr/bin/esccsettings 0 /etc/escc/hg1700.cfg

rules/escc/fs/etc/escc/ifog-imu-1-a.sh

@@ -1,8 +1,14 @@
-# IMU
-/usr/bin/setescc 0 0x200 5 0 0 0
-/usr/bin/esccsettings 0 /etc/escc/ifog-imu-1-a.cfg
+# Channels:
+# * 0: iMAR iFOG-IMU-1-A
+# * 1: LSTS PSIMAR
 
-# PSIMAR
+# Create channels.
+/usr/bin/setescc 0 0x200 5 0 0 0
 /usr/bin/setescc 1 0x200 5 0 0 1
+
+# Set clock.
+"$cmd_escc_set_clock" 1 25804800
+
+# Set registers.
+/usr/bin/esccsettings 0 /etc/escc/ifog-imu-1-a.cfg
 /usr/bin/esccsettings 1 /etc/escc/psimar.cfg
-/usr/bin/esccclock 1 0xc8920 22

rules/escc/fs/etc/rc.d/escc

@@ -5,6 +5,14 @@ start()
     mknod /dev/escc0 c 261 0 &&
     rm -f /dev/escc1 &&
     mknod /dev/escc1 c 261 1 &&
+
+    # Clock command.
+    if [ -z "$cfg_escc_et" ]; then
+        cmd_escc_set_clock='/usr/bin/esccclock'
+    else
+        cmd_escc_set_clock='/usr/bin/esccfs6131'
+    fi &&
+
     if [ -f "$cfg_escc_script" ]; then
         source "$cfg_escc_script"
     fi

rules/ethtool/default.bash

@@ -0,0 +1,45 @@
+version=\
+(
+    "4.2"
+)
+
+url=\
+(
+    "https://www.kernel.org/pub/software/network/ethtool/ethtool-${version}.tar.gz"
+)
+
+md5=\
+(
+    "5b55f7cd76e901dfc2738ac22cab96ca"
+)
+maintainer=\
+(
+    'Kristian Klausen <kristian.klausen@itk.ntnu.no>'
+)
+
+configure()
+{
+    ../ethtool-${version}/configure \
+        --prefix="${cfg_dir_toolchain_sysroot}/usr" \
+        --target=$cfg_target_canonical \
+        --host=$cfg_target_canonical \
+        --config-cache
+}
+
+build()
+{
+    $cmd_make
+}
+
+host_install()
+{
+    $cmd_make install
+}
+
+target_install()
+{
+    cp -a "${cfg_dir_toolchain_sysroot}/usr/sbin/ethtool" "${cfg_dir_rootfs}/usr/sbin/" &&
+    $cmd_target_strip "${cfg_dir_rootfs}/usr/sbin/ethtool" 
+}
+
+

rules/fconfig/default.bash

@@ -1,30 +0,0 @@
-version=\
-(
-    "20080329"
-)
-
-url=\
-(
-    "http://andrzejekiert.ovh.org/software/fconfig/fconfig-$version.tar.gz"
-)
-
-md5=\
-(
-    "dac355e9f2a0f48c414c52e2034b6346"
-)
-
-post_unpack()
-{
-    patch -d ../fconfig -p1 < "$pkg_dir"/patches/limits.patch
-}
-
-build()
-{
-    $cmd_make -C ../fconfig CC=$cmd_target_cc
-}
-
-target_install()
-{
-    cp -a ../fconfig/fconfig $cfg_dir_rootfs/usr/sbin
-    $cmd_target_strip $cfg_dir_rootfs/usr/sbin/fconfig
-}

rules/fconfig/patches/limits.patch

@@ -1,24 +0,0 @@
-diff -uNr fconfig/fconfig.c fconfig.mod/fconfig.c
---- fconfig/fconfig.c	2010-02-05 05:01:14.000000000 +0000
-+++ fconfig.mod/fconfig.c	2010-02-05 05:02:37.000000000 +0000
-@@ -103,7 +103,7 @@
- struct config_data *get_fconfig_handle(struct config_data *data, 
- 	uint8_t *dev, int offset, mode_t mode)
- {
--	uint16_t count;
-+	uint32_t count;
- 
- 	if ((data->fd = open(dev, mode)) < 0) {
- 		MESSAGE(VERB_LOW, "Failed to open device or file %s!\n", dev);
-diff -uNr fconfig/ftypes.h fconfig.mod/ftypes.h
---- fconfig/ftypes.h	2010-02-05 05:01:14.000000000 +0000
-+++ fconfig.mod/ftypes.h	2010-02-05 05:02:11.000000000 +0000
-@@ -32,7 +32,7 @@
- #define MAX_STRING_LENGTH 128
- 
- //CYGNUM_REDBOOT_FLASH_CONFIG_SIZE
--#define MAX_CONFIG_DATA 4096
-+#define MAX_CONFIG_DATA 0x20000
- 
- /*
-  * RedBoot flash configuration type description. 

rules/ffmpeg/default.bash

@@ -1,6 +1,6 @@
 version=\
 (
-    "1.0"
+    "2.6"
 )
 
 url=\
@@ -10,7 +10,7 @@ url=\
 
 md5=\
 (
-    3ed526cea20c1bffb5a37f7730f710bd
+    '5bf6097833a3fea6a9e51b0a456c6922'
 )
 
 configure()
@@ -18,10 +18,13 @@ configure()
     ./configure \
         --sysroot="$cfg_dir_toolchain_sysroot" \
         --prefix="$cfg_dir_rootfs/usr" \
+        --incdir="$cfg_dir_toolchain_sysroot/usr/include" \
+        --enable-cross-compile \
         --cross-prefix="$cfg_target_canonical-" \
         --target-os="linux" \
-        --enable-memalign-hack \
         --enable-shared \
+        --disable-static \
+        --enable-pic \
         --enable-gpl \
         --arch=$cfg_architecture
 }
@@ -31,8 +34,15 @@ build()
     $cmd_make
 }
 
+host_install()
+{
+    $cmd_make \
+	LIBDIR="$cfg_dir_toolchain_sysroot/usr/lib" \
+        install-headers
+}
+
 target_install()
 {
     $cmd_make \
-        install
+        install-libs
 }

rules/filesystem/fs/etc/rc.d/mobile-internet

@@ -1,192 +0,0 @@
-#! /bin/sh
-#############################################################################
-# Copyright (C) 2012 Laboratório de Sistemas e Tecnologia Subaquática       #
-# Departamento de Engenharia Electrotécnica e de Computadores               #
-# Rua Dr. Roberto Frias, 4200-465 Porto, Portugal                           #
-#############################################################################
-# Author: Ricardo Martins                                                   #
-#############################################################################
-
-GSM_USER='vodafone'
-GSM_PASS='vodafone'
-GSM_APN='internet.vodafone.pt'
-GSM_MODE='AT\^SYSCFG=2,2,3fffffff,0,1'
-GSM_PIN='AT'
-
-FWL_EXT_ITF='ppp0'
-FWL_INT_ITF='eth0'
-
-CHAT_SCRIPT=$(cat <<EOF
-ABORT 'BUSY' \
-ABORT 'NO CARRIER' \
-ABORT 'VOICE' \
-ABORT 'NO DIALTONE' \
-ABORT 'NO DIAL TONE' \
-ABORT 'NO ANSWER' \
-ABORT 'DELAYED' \
-REPORT CONNECT \
-TIMEOUT 6 \
-'' 'ATQ0' \
-'OK-AT-OK' 'ATZ' \
-TIMEOUT 3 \
-'OK' '$GSM_PIN' \
-'OK-AT-OK' 'ATI' \
-'OK' 'ATZ' \
-'OK' 'ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0' \
-'OK' '$GSM_MODE' \
-'OK-AT-OK' 'AT+CGDCONT=1,\"IP\",\"$GSM_APN\"' \
-'OK' 'ATDT*99***1#' \
-TIMEOUT 30 \
-CONNECT ''
-EOF
-)
-
-modem_probe()
-{
-    nr="$(cat /proc/tty/driver/usbserial | grep GSM | head -n 1 | cut -f1 -d:)"
-    if [ -z "$nr" ]; then
-        echo ""
-    else
-        echo "/dev/ttyUSB$nr"
-    fi
-}
-
-ppp_start()
-{
-    modem="$(modem_probe)"
-
-    if [ -z "$modem" ]; then
-        echo -e "\nERROR: failed to find GSM modem.\n"
-        exit 1
-    fi
-
-    auth=''
-    if [ -n "$GSM_USER" ] && [ -n "$GSM_PASS" ]; then
-        auth="user \"$GSM_USER\" password \"$GSM_PASS\""
-    fi
-
-    echo -e "\n* Removing default route"
-
-    /sbin/route del default dev eth0 > /dev/null 2>&1
-
-    echo -e "\n* Starting PPP"
-
-    /usr/sbin/pppd \
-        "$modem" \
-        921600 \
-        $auth \
-        lock \
-        crtscts \
-        modem \
-        passive \
-        novj \
-        defaultroute \
-        noipdefault \
-        usepeerdns \
-        noauth \
-        hide-password \
-        persist \
-        holdoff 10 \
-        maxfail 2 \
-        updetach \
-        connect "/usr/sbin/chat -E -v -t15 $CHAT_SCRIPT" > /var/run/ppp.log 2>&1
-
-    if [ $? -ne 0 ]; then
-        echo -e "\nERROR: PPP failed to establish a connection.\n"
-        exit 1
-    fi
-
-    ip=$(ifconfig ppp0 | grep inet | cut -f2 -d: | cut -f1 -d' ')
-    echo "  - External IP is $ip"
-}
-
-ppp_stop()
-{
-    pid="$(cat /var/run/ppp0.pid 2> /dev/null)"
-
-    echo -e "\n* Stopping PPP"
-
-    if [ -z "$pid" ]; then
-        echo "  - Daemon is not running"
-        return 0
-    fi
-
-    for n in 1 2 3 4 5; do
-        if ! [ -d "/proc/$pid" ]; then
-            echo "  - Daemon stopped"
-            return 0
-        fi
-
-        echo "  - Sending SIGTERM to '$pid' (try $n)"
-        kill "$pid" > /dev/null 2>&1
-        sleep 2
-    done
-
-    kill -9 "$pid" > /dev/null 2>&1
-    echo "  - Daemon terminated"
-    return 0
-}
-
-nat_start()
-{
-    echo -e "\n* Enabling NAT"
-
-    echo "  - Enabling IP forwarding"
-    echo '1' > /proc/sys/net/ipv4/ip_forward
-    echo '1' > /proc/sys/net/ipv4/ip_dynaddr
-
-    echo "  - Flushing rules"
-    iptables -P INPUT ACCEPT
-    iptables -F INPUT
-    iptables -P OUTPUT ACCEPT
-    iptables -F OUTPUT
-    iptables -P FORWARD DROP
-    iptables -F FORWARD
-    iptables -t nat -F
-
-    echo "  - Installing rules"
-    iptables -A FORWARD -i "$FWL_EXT_ITF" -o "$FWL_INT_ITF" -m state --state ESTABLISHED,RELATED -j ACCEPT
-    iptables -A FORWARD -i "$FWL_EXT_ITF" -o "$FWL_EXT_ITF" -j ACCEPT
-    iptables -A FORWARD -i "$FWL_EXT_ITF" -o "$FWL_INT_ITF" -j ACCEPT
-    iptables -A FORWARD -i "$FWL_INT_ITF" -o "$FWL_EXT_ITF" -j ACCEPT
-    iptables -A FORWARD -j LOG
-    iptables -t nat -A POSTROUTING -o "$FWL_EXT_ITF" -j MASQUERADE
-}
-
-nat_stop()
-{
-    echo -e "\n* Disabling NAT"
-
-    echo "  - Disabling IP forwarding"
-    echo '0' > /proc/sys/net/ipv4/ip_forward
-    echo '0' > /proc/sys/net/ipv4/ip_dynaddr
-
-    echo "  - Flushing NAT rules"
-    iptables -P INPUT ACCEPT
-    iptables -F INPUT
-    iptables -P OUTPUT ACCEPT
-    iptables -F OUTPUT
-    iptables -P FORWARD DROP
-    iptables -F FORWARD
-    iptables -t nat -F
-}
-
-start()
-{
-    ppp_start && nat_start
-    if [ $? -eq 0 ]; then
-        echo -e "\n* Connection Established\n"
-    else
-        echo -e "\nERROR: failed to establish a connection\n"
-    fi
-}
-
-stop()
-{
-    nat_stop && ppp_stop
-    if [ $? -eq 0 ]; then
-        echo -e "\n* Service stopped\n"
-    else
-        echo -e "\nERROR: failed to stop service.\n"
-    fi
-}

rules/filesystem/fs/etc/rc.d/network

@@ -1,5 +1,14 @@
 start()
 {
+    if [ -n "$cfg_eth_ext_ip$cfg_eth_prv_ip" ]; then
+        while [ 1 ]; do
+            echo "* Waiting for eth0 device..."
+            ifconfig eth0 > /dev/null 2>&1
+            [ $? -eq 0 ] && break
+            usleep 250000
+        done
+    fi
+
     if [ -n "$cfg_bridge0_ip" ]; then
         for itf in $cfg_bridge0_itfs; do
             ifconfig $itf 0.0.0.0

rules/filesystem/fs/etc/rc.d/upgrade

@@ -60,24 +60,17 @@ new_unpack()
     return 1
 }
 
-kernel_dst()
+kernel_mtd_part()
 {
-    echo -n "* Detecting kernel destination... "
+    echo -n "* Detecting kernel MTD partition... "
 
-    # Kernel resides in the root filesystem.
     if [ -d /boot/extlinux ]; then
-        echo "filesystem"
+        echo "not present"
         return 0
     fi
 
     if ! [ -f /proc/mtd ]; then
-        echo "filesystem"
-        return 0
-    fi
-
-    grep 'uboot=ext2' /proc/cmdline > /dev/null 2>&1
-    if [ $? -eq 0 ]; then
-        echo "filesystem"
+        echo "not present"
         return 0
     fi
 
@@ -85,21 +78,65 @@ kernel_dst()
     if [ -z "$fw_kernel_mtd" ]; then
         export fw_kernel_mtd="$(grep \"Kernel\" /proc/mtd | cut -f1 -d':')"
         if [ -z "$fw_kernel_mtd" ]; then
-            echo "failed to detect kernel's MTD partition"
+            echo "not present"
             return 1
         fi
     fi
 
-    echo "mtd"
+    echo "$fw_kernel_mtd"
     return 0
 }
 
-kernel_upgrade()
+uboot_mtd_part()
+{
+    echo -n "* Detecting u-boot MTD partition... "
+    if ! [ -f /proc/mtd ]; then
+        echo "filesystem"
+        return 0
+    fi
+
+    export fw_uboot_mtd="$(grep \"uboot\" /proc/mtd | cut -f1 -d':')"
+    if [ -z "$fw_uboot_mtd" ]; then
+        export fw_uboot_mtd="$(grep \"u-boot\" /proc/mtd | cut -f1 -d':')"
+        if [ -z "$fw_uboot_mtd" ]; then
+            echo "not present"
+            return 1
+        fi
+    fi
+
+    echo "$fw_uboot_mtd"
+    return 0
+}
+
+uboot_mtd_upgrade()
+{
+    bin="$base/.glued-new/boot/u-boot.bin"
+
+    if ! [ -f "$bin" ]; then
+        return 0
+    fi
+
+    if [ -z "$fw_uboot_mtd" ]; then
+        return 0
+    fi
+
+    echo -n "* Upgrading u-boot MTD partition... "
+    "$flashcp" -v "$bin" /dev/"$fw_uboot_mtd"
+    if [ $? -ne 0 ]; then
+        echo "failed"
+        return 1
+    fi
+
+    echo "done"
+    return 0
+}
+
+kernel_mtd_upgrade()
 {
     # Upgrade MTD
     if [ -n "$fw_kernel_mtd" ]; then
         echo -n "* Upgrading kernel... "
-        "$flashcp" -v "$base/.glued-new/boot/kernel" /dev/"$fw_kernel_mtd" > /dev/null 2>&1
+        "$flashcp" -v "$base/.glued-new/boot/kernel" /dev/"$fw_kernel_mtd"
         if [ $? -ne 0 ]; then
             echo "failed"
             return 1
@@ -109,24 +146,19 @@ kernel_upgrade()
     fi
 }
 
-bbb_boot_upgrade()
+uboot_part_upgrade()
 {
-    # Check if board is a BeagleBone black.
-    dmesg | grep -i 'machine model' | grep -i beaglebone
-    if [ $? -ne 0 ]; then
-        return 0
-    fi
+    label="$1"
+    dev="$2"
 
-    dev='/dev/mmcblk1p1'
-
-    echo -en '* BeagleBone Black: checking eMMC device... '
+    echo -en "* $label: probing bootloader partition... "
     if ! [ -b "$dev" ]; then
         echo 'not present'
         return 0
     fi
     echo 'present'
 
-    echo -en "* BeagleBone Black: mounting bootloader partition... "
+    echo -en "* $label: mounting bootloader partition... "
     mount -t vfat "$dev" /mnt > /dev/null 2>&1
     if [ $? -ne 0 ]; then
         echo "failed"
@@ -135,14 +167,14 @@ bbb_boot_upgrade()
     echo 'done'
 
     for f in MLO u-boot.img; do
-        if [ -f /mnt/MLO ]; then
-            echo -en "* BeagleBone Black: Replacing $f... "
+        if [ -f "/mnt/$f" ]; then
+            echo -en "* $label: Replacing $f... "
             cp "$base/.glued-new/boot/$f" /mnt
             echo 'done'
         fi
     done
 
-    echo -en "* BeagleBone Black: unmounting bootloader partition... "
+    echo -en "* $label: unmounting bootloader partition... "
     umount /mnt > /dev/null 2>&1
     if [ $? -ne 0 ]; then
         echo 'failed'
@@ -154,6 +186,105 @@ bbb_boot_upgrade()
     return 0
 }
 
+uboot_part_upgrade_check()
+{
+    # Check if board is a BeagleBone black.
+    dmesg | grep -i 'machine model' | grep -i beaglebone > /dev/null 2>&1
+    if [ $? -eq 0 ]; then
+        dev="$(ls /sys/class/mmc_host/mmc?/mmc?:0001/block)"
+        uboot_part_upgrade 'BeagleBone Black' "/dev/${dev}p1"
+        return 0
+    fi
+
+    # Check if board is a IGEPv2.
+    dmesg | grep -i 'machine model' | grep -i igepv2 > /dev/null 2>&1
+    if [ $? -eq 0 ]; then
+        uboot_part_upgrade 'IGEPv2' '/dev/mmcblk0p1'
+        return 0
+    fi
+    dmesg | grep Machine | grep 'IGEP v2' > /dev/null 2>&1
+    if [ $? -eq 0 ]; then
+        uboot_part_upgrade 'IGEPv2' '/dev/mmcblk0p1'
+        return 0
+    fi
+
+    return 0
+}
+
+rpi2_boot_part_upgrade()
+{
+    label="$1"
+    dev="$2"
+
+    echo -en "* $label: probing bootloader partition... "
+    if ! [ -b "$dev" ]; then
+        echo 'not present'
+        return 0
+    fi
+    echo 'present'
+
+    echo -en "* $label: mounting bootloader partition... "
+    mount -t vfat "$dev" /mnt > /dev/null 2>&1
+    if [ $? -ne 0 ]; then
+        echo "failed"
+        return 0
+    fi
+    echo 'done'
+
+    for f in bootcode.bin cmdline.txt config.txt fixup.dat start.elf; do
+        if [ -f "/mnt/$f" ]; then
+            echo -en "* $label: Replacing $f... "
+            cp "$base/.glued-new/boot/$f" /mnt
+            echo 'done'
+        fi
+    done
+
+    for f in overlays; do
+        if [ -d "/mnt/$f" ]; then
+            echo -en "* $label: Replacing $f... "
+	    rm -rf "/mnt/$f" && cp -r "$base/.glued-new/boot/$f" /mnt
+            echo 'done'
+        fi
+    done
+
+    for dtb in "$base/.glued-new/boot/"*.dtb; do
+        echo -en "* $label: Replacing $dtb... "
+        cp "$dtb" "/mnt"
+        echo 'done'
+    done
+
+    kernel='kernel7.img'
+    if [ -f "/mnt/$kernel" ]; then
+        echo -en "* $label: Replacing $kernel... "
+        cp "$base/.glued-new/boot/kernel" "/mnt/$kernel"
+        echo 'done'
+    fi
+
+    echo -en "* $label: unmounting bootloader partition... "
+    umount /mnt > /dev/null 2>&1
+    if [ $? -ne 0 ]; then
+        echo 'failed'
+        return  1
+    fi
+
+    sync && sync && sync && sync
+    echo 'done'
+    return 0
+}
+
+# Check if board is a Raspberry Pi 2/3.
+rpi2_boot_part_upgrade_check()
+{
+    for machine in 'bcm2709' 'raspberry pi'; do
+        dmesg | grep Machine | grep -i "$machine" > /dev/null 2>&1
+        if [ $? -eq 0 ]; then
+            echo "* rpi2: machine detected"
+            rpi2_boot_part_upgrade "rpi2" "/dev/mmcblk0p1"
+            return 0
+        fi
+    done
+}
+
 old_move()
 {
     echo "* Mounting rootfs read-write..."
@@ -199,10 +330,13 @@ start()
 {
     clean
     version || return 1
-    kernel_dst || return 1
+    kernel_mtd_part || return 1
+    uboot_mtd_part || return 1
     new_unpack || return 1
-    bbb_boot_upgrade || return 1
-    kernel_upgrade || return 1
+    uboot_part_upgrade_check || return 1
+    rpi2_boot_part_upgrade_check || return 1
+    kernel_mtd_upgrade || return 1
+    uboot_mtd_upgrade || return 1
     old_move || return 1
 }
 

rules/filesystem/fs/etc/services

@@ -1,4 +0,0 @@
-ssh             22/tcp                          # The Secure Shell (SSH) Protocol
-ssh             22/udp                          # The Secure Shell (SSH) Protocol
-ntp             123/tcp                         # Network Time Protocol
-ntp             123/udp                         # Network Time Protocol

rules/filesystem/fs/sbin/mdev-ttyusb

@@ -0,0 +1,43 @@
+#! /bin/sh
+
+[ "$SUBSYSTEM" -ne "tty" ] && exit 0
+if [ -z "$MAJOR" ] || [ -z "$MINOR" ]; then
+    exit 0
+fi
+
+MAJOR_HEX=$(echo $(printf %2x "$MAJOR"))
+MINOR_HEX=$(echo $(printf %2x "$MINOR"))
+
+# env | while read line; do
+#           logger -t "$0" "$line"
+#       done
+
+case "$ACTION" in
+    add)
+        dev_root="/sys/$DEVPATH/../../../../"
+        itf_root="/sys/$DEVPATH/../../../"
+        vid="$(cat $dev_root/idVendor 2> /dev/null)"
+        pid="$(cat $dev_root/idProduct 2> /dev/null)"
+        serial="$(cat $dev_root/serial 2> /dev/null)"
+        [ -z "$serial" ] && serial='0'
+        itf="$(cat $itf_root/bInterfaceNumber 2> /dev/null)"
+        dev_name="${vid}_${pid}_${serial}_${itf}"
+        dev_file="/dev/uart/$dev_name"
+        logger -t "$0" "creating device: $dev_file"
+        mknod "$dev_file" c "$MAJOR" "$MINOR"
+        ;;
+
+    remove)
+        removed_major_minor="$MAJOR_HEX:$MINOR_HEX"
+
+        for f in /dev/uart/*; do
+            file_major_minor="$(stat -c %t:%T "$f")"
+            #logger -t "$0" "$f | $removed_major_minor | $file_major_minor"
+
+            if [ "$file_major_minor" = "$removed_major_minor" ]; then
+                logger -t "$0" "removing device: $f"
+                rm -f "$f"
+            fi
+        done
+        ;;
+esac

rules/filesystem/fs/sbin/services

@@ -14,6 +14,12 @@ fi
 
 sysinit()
 {
+    echo ""
+
+    if ! [ -c /dev/null ]; then
+        mount -t devtmpfs devtmpfs /dev
+    fi
+
     if [ -f /.reboot ]; then
         mount -t proc proc /proc
         mount -o remount,rw /
@@ -23,44 +29,45 @@ sysinit()
         return 0
     fi
 
-# Mount pseudo-filesystems.
+    # Mount pseudo-filesystems.
     mount -t sysfs sysfs /sys &&
     mount -t proc proc /proc &&
-    mkdir /dev/shm /dev/pts &&
+    mkdir -p /dev/shm /dev/pts &&
     mount -t tmpfs -o size="$cfg_tmpfs_size" tmpfs /dev/shm &&
     mount -t devpts devpts /dev/pts &&
 
-# Register mdev as hotplug event handler.
+    # Register mdev as hotplug event handler.
     echo >/dev/mdev.seq &&
     echo /sbin/mdev > /proc/sys/kernel/hotplug &&
 
-# Update ld cache, populate /dev.
-#    mount -o remount,rw / &&
+    # Update ld cache, populate /dev.
     /sbin/mdev -s &&
-#    /sbin/ldconfig &&
-#    mount -o remount,ro / &&
 
-# Set minimum free kbytes.
+    # Set minimum free kbytes.
     echo "$cfg_min_free_kbytes" > /proc/sys/vm/min_free_kbytes &&
 
-# Set hostname.
+    # Set hostname.
     hostname "$cfg_hostname" &&
 
-# Loopback device.
+    # Loopback device.
     ifconfig lo 127.0.0.1 netmask 255.0.0.0 up &&
 
-# Load modules.
+    # Load modules.
     modprobe -a $cfg_modules $cfg_modules1
 
-# Start services.
+    # Start services.
     for service in $cfg_services0 $cfg_services1 $cfg_services2; do
         . /etc/rc.d/$service
         start
     done
+
+    echo ""
 }
 
 syshalt()
 {
+    echo ""
+
     if [ -f /.reboot ]; then
         return 0
     fi
@@ -76,7 +83,9 @@ syshalt()
         stop
     done
 
-    umount -r /dev/pts /dev/shm /sys / /proc
+    umount -r /dev/pts /dev/shm /sys / /proc > /dev/null 2>&1
+
+    echo ""
 }
 
 service()

rules/filesystem/fs/sbin/version

@@ -4,7 +4,7 @@ config='/etc/config'
 
 if [ -f "$config" ]; then
     source "$config"
-    echo "$cfg_glued_version"
+    echo "$cfg_glued_version ($cfg_glued_git_version)"
     exit 0
 fi
 

rules/filesystem/target.bash

@@ -11,7 +11,7 @@ maintainer=\
 target_install()
 {
     $cmd_mkdir \
-        "$cfg_dir_rootfs"/{dev,boot,proc,sys,mnt,etc,bin,sbin,opt,var,root} \
+        "$cfg_dir_rootfs"/{dev,boot,proc,sys,etc,bin,sbin,opt,var,mnt,root} \
         "$cfg_dir_rootfs"/usr/{bin,sbin,lib,lib/firmware} \
         "$cfg_dir_rootfs"/opt \
         "$cfg_dir_rootfs"/dev/{shm,pts} \
@@ -23,6 +23,7 @@ target_install()
     ln -fs ../tmp "$cfg_dir_rootfs"/var/run &&
     ln -fs ../tmp "$cfg_dir_rootfs"/var/log &&
     ln -fs ../tmp "$cfg_dir_rootfs"/var/lock &&
+    ln -fs ../tmp "$cfg_dir_rootfs"/var/lib &&
     ln -fs /sbin/init "$cfg_dir_rootfs"/init &&
     ln -fs /tmp/resolv.conf "$cfg_dir_rootfs"/etc/resolv.conf &&
     ln -fs /proc/self/mounts "$cfg_dir_rootfs"/etc/mtab &&

rules/gcc/common.bash

@@ -1,6 +1,6 @@
 version=\
 (
-    '4.8.2'
+    '4.9.3'
 )
 
 url=\
@@ -10,7 +10,7 @@ url=\
 
 md5=\
 (
-    'a3d7d63b9cb6b6ea049469a0c4a43c9d'
+    '6f831b4d251872736e8e9cc09746f327'
 )
 
 build_dir=$pkg_var

rules/gcc/cross.bash

@@ -2,7 +2,7 @@ source $pkg_common
 
 requires=\
 (
-    'eglibc/cross'
+    'glibc/cross'
 )
 
 configure()
@@ -11,6 +11,7 @@ configure()
     "../gcc-$version/configure" $cfg_target_gcc_configure_flags \
         --target="$cfg_target_canonical" \
         --prefix="$cfg_dir_toolchain" \
+        --with-build-sysroot="$cfg_dir_toolchain_sysroot" \
         --with-sysroot="$cfg_dir_toolchain_sysroot" \
         --with-mpfr="$cfg_dir_toolchain" \
         --with-gmp="$cfg_dir_toolchain" \
@@ -31,14 +32,19 @@ build()
 
 host_install()
 {
+    libdir=lib
+    if [ -d "$cfg_dir_toolchain/$cfg_target_canonical/lib64" ]; then
+        libdir=lib64
+    fi
+
     $cmd_make install &&
 
     cp -d \
-        "$cfg_dir_toolchain/$cfg_target_canonical/lib/"libgcc_s.so* \
-        "$cfg_dir_toolchain_sysroot/lib" &&
+       "$cfg_dir_toolchain/$cfg_target_canonical/$libdir"/libgcc_s.so* \
+       "$cfg_dir_toolchain_sysroot/lib" &&
     cp -d \
-        "$cfg_dir_toolchain/$cfg_target_canonical/lib/"libstdc++.so* \
-        "$cfg_dir_toolchain_sysroot/usr/lib"
+       "$cfg_dir_toolchain/$cfg_target_canonical/$libdir"/libstdc++.so* \
+       "$cfg_dir_toolchain_sysroot/usr/lib"
 }
 
 target_install()

rules/gcc/cross_stage2.bash

@@ -2,7 +2,7 @@ source $pkg_common
 
 requires=\
 (
-    'eglibc/headers'
+    'glibc/headers'
 )
 
 configure()
@@ -10,6 +10,7 @@ configure()
     MAKEINFO='/bin/true' \
     "../gcc-$version/configure" $cfg_target_gcc_configure_flags \
         --prefix="$cfg_dir_toolchain" \
+        --with-build-sysroot="$cfg_dir_toolchain_sysroot" \
         --with-sysroot="$cfg_dir_toolchain_sysroot" \
         --target="$cfg_target_canonical" \
         --host="$cfg_host_canonical" \

rules/gcc/patches-4.6.3/00-libjava-i786.patch

@@ -1,11 +0,0 @@
---- gcc-4.6.3/libjava/configure.host	2010-12-06 00:50:04.000000000 +0000
-+++ gcc-4.6.3.rasm/libjava/configure.host	2012-10-30 20:29:06.192935517 +0000
-@@ -115,7 +115,7 @@
-   mips*-*)
- 	libgcj_interpreter=yes
- 	;;
--  i686-*|i586-*|i486-*|i386-*)
-+  i786-*|i686-*|i586-*|i486-*|i386-*)
- 	sysdeps_dir=i386
- 	# With -fomit-frame-pointer -maccumulate-outgoing-args (implied),
- 	# the .text section of libgcj.so is 30k larger, and the .eh_frame

rules/gcc/patches-4.6.3/01-lib64-to-lib.patch

@@ -1,14 +0,0 @@
-diff -Nru gcc-4.6.3/gcc/config/i386/t-linux64 gcc-4.6.3.rasm/gcc/config/i386/t-linux64
---- gcc-4.6.3/gcc/config/i386/t-linux64	2009-04-21 20:03:23.000000000 +0100
-+++ gcc-4.6.3.rasm/gcc/config/i386/t-linux64	2012-12-11 19:01:42.549964639 +0000
-@@ -24,8 +24,8 @@
- # MULTILIB_OSDIRNAMES according to what is found on the target.
- 
- MULTILIB_OPTIONS = m64/m32
--MULTILIB_DIRNAMES = 64 32 
--MULTILIB_OSDIRNAMES = ../lib64 $(if $(wildcard $(shell echo $(SYSTEM_HEADER_DIR))/../../usr/lib32),../lib32,../lib)
-+MULTILIB_DIRNAMES = 64 32
-+MULTILIB_OSDIRNAMES = ../lib $(if $(wildcard $(shell echo $(SYSTEM_HEADER_DIR))/../../usr/lib32),../lib32,../lib)
- 
- LIBGCC = stmp-multilib
- INSTALL_LIBGCC = install-multilib

rules/gdb/common.bash

@@ -1,14 +1,14 @@
 version=\
 (
-    '7.7.1'
+    '7.8.2'
 )
 
 url=\
 (
-    "http://ftp.gnu.org/gnu/gdb/gdb-$version.tar.bz2"
+    "http://ftp.gnu.org/gnu/gdb/gdb-$version.tar.xz"
 )
 
 md5=\
 (
-    '77b20b515e7c25f032cb9732a66620fe'
+    'a80cf252ed2e775d4e4533341bbf2459'
 )

rules/gdb/cross.bash

@@ -8,13 +8,14 @@ requires=\
 configure()
 {
     cd "$pkg_build_dir" &&
-    CFLAGS=-I"$cfg_dir_toolchain/include" \
-	LDFLAGS=-L"$cfg_dir_toolchain/lib" \
-	"../gdb-$version/configure" \
+        LDFLAGS="-static -L$cfg_dir_toolchain/lib" \
+        CFLAGS="-I$cfg_dir_toolchain/include" \
+       "../gdb-$version/configure" \
         --prefix="$cfg_dir_toolchain" \
         --target="$cfg_target_canonical" \
         --host="$cfg_host_canonical" \
         --build="$cfg_host_canonical" \
+        --with-build-sysroot="$cfg_dir_toolchain_sysroot" \
         --with-sysroot="$cfg_dir_toolchain_sysroot" \
         --disable-nls \
         --disable-tui
@@ -28,5 +29,4 @@ build()
 host_install()
 {
     $cmd_make -C "$pkg_build_dir" install
-    rm -rf "$cfg_dir_toolchain"/{info,man}
 }

rules/glibc/common.bash

@@ -1,16 +1,16 @@
 version=\
 (
-    '2.15.17955'
+    '2.22'
 )
 
 url=\
 (
-    "http://www.lsts.pt/glued/eglibc-$version.tar.bz2"
+    "http://ftp.gnu.org/pub/gnu/glibc/glibc-$version.tar.xz"
 )
 
 md5=\
 (
-    '0694f304863e3c97562857388137a83e'
+    'e51e02bf552a0a1fbbdc948fb2f5e83c'
 )
 
 maintainer=\
@@ -22,11 +22,9 @@ build_dir=$pkg_var
 
 post_unpack()
 {
-    ln -fs ../ports ../eglibc-$version/libc/ports
-
     patches=$(ls "$pkg_dir"/patches/*.patch)
 
-    cd ../eglibc-$version
+    cd ../glibc-$version
     if [ -n "$patches" ]; then
         cat $patches | patch -p1
     fi
@@ -41,17 +39,24 @@ configure()
         CC="$cfg_dir_toolchain/bin/$cfg_target_canonical-gcc" \
         CXX="$cfg_dir_toolchain/bin/$cfg_target_canonical-g++" \
         CFLAGS=$cfg_target_gcc_flags \
-        "../eglibc-$version/libc/configure" \
-        $cfg_target_eglibc_configure_flags \
+        "../glibc-$version/configure" \
+        $cfg_target_glibc_configure_flags \
         --prefix=/usr \
         --with-headers="$cfg_dir_toolchain_sysroot/usr/include" \
+        --with-build-sysroot="$cfg_dir_toolchain_sysroot" \
+        --with-sysroot="$cfg_dir_toolchain_sysroot" \
         --build="$cfg_host_canonical" \
         --host="$cfg_target_canonical" \
+        --disable-multilib \
         --disable-profile \
         --without-gd \
         --without-cvs \
         --enable-add-ons \
         --with-tls \
         --enable-kernel=2.6.32 \
-        --disable-nls
+        --disable-nls \
+        --enable-static-nss \
+        --disable-werror \
+        --enable-obsolete-rpc \
+        --enable-bind-now
 }

rules/glibc/cross.bash

@@ -7,13 +7,12 @@ requires=\
 
 build()
 {
-    $cmd_make -j1
+    $cmd_make
 }
 
 host_install()
 {
-    $cmd_make install_root="$cfg_dir_toolchain_sysroot" -j1 install &&
-    cp "$pkg_dir"/files/timepps.h "$cfg_dir_toolchain_sysroot/usr/include"
+    $cmd_make install_root="$cfg_dir_toolchain_sysroot" install
 }
 
 target_install()

rules/glibc/headers.bash

@@ -21,4 +21,6 @@ EOF
     $cmd_make csu/subdir_lib &&
     cp csu/crt1.o csu/crti.o csu/crtn.o "$cfg_dir_toolchain_sysroot/usr/lib" &&
     $cmd_target_cc -nostdlib -nostartfiles -shared -x c /dev/null -o "$cfg_dir_toolchain_sysroot/usr/lib/libc.so"
+    $cmd_mkdir "$cfg_dir_toolchain_sysroot/usr/include/gnu" &&
+    touch "$cfg_dir_toolchain_sysroot/usr/include/gnu/stubs.h"
 }

rules/gmp/host.bash

@@ -1,27 +1,27 @@
 version=\
 (
-    "5.0.4"
+    '5.0.4'
 )
 
 url=\
 (
-    "ftp://ftp.gmplib.org/pub/gmp-$version/gmp-$version.tar.bz2"
+    "http://ftp.gnu.org/pub/gnu/gmp/gmp-$version.tar.bz2"
 )
 
 md5=\
 (
-    "50c3edcb7c9438e04377ee9a1a061b79"
+    '50c3edcb7c9438e04377ee9a1a061b79'
 )
 
 maintainer=\
 (
-    "Ricardo Martins <rasm@fe.up.pt>"
+    'Ricardo Martins <rasm@oceanscan-mst.com>'
 )
 
 configure()
 {
     ./configure \
-        --prefix="${cfg_dir_toolchain}" \
+        --prefix="$cfg_dir_toolchain" \
         --disable-shared \
         --enable-static
 }

rules/gnuplot/default.bash

@@ -1,41 +1,41 @@
 version=\
 (
-  "4.6.1"
+    '4.6.5'
 )
 
 url=\
 (
-  "ftp://ftp.dante.de/pub/tex/graphics/gnuplot/${version}/gnuplot-${version}.tar.gz"
+    "http://downloads.sourceforge.net/gnuplot/gnuplot/$version/gnuplot-$version.tar.gz"
 )
 
 md5=\
 (
-  "4c9a06461f402482c30cf94e267eb877"
+    '9a476b21f74bd99c876f1509d731a0f9'
 )
 
 configure()
 {
-  ./configure \
-   --prefix="${cfg_dir_toolchain_sysroot}/usr" \
-   --target="$cfg_target_canonical" \
-   --host="$cfg_target_canonical" \
-   --build="$cfg_host_canonical" \
-   --disable-history-file \
-   --without-x \
-   --disable-raise-console \
-   --disable-mouse \
-   --without-tutorial \
-   --without-demo \
-   --disable-demo \
-   --without-row-help \
-   --disable-history-file \
-   --without-lisp-files \
-   --disable-wxwidgets \
-   --without-lua \
-   --without-latex \
-   --without-cairo
+    ./configure \
+        --prefix="${cfg_dir_toolchain_sysroot}/usr" \
+        --target="$cfg_target_canonical" \
+        --host="$cfg_target_canonical" \
+        --build="$cfg_host_canonical" \
+        --disable-history-file \
+        --without-x \
+        --disable-raise-console \
+        --disable-mouse \
+        --without-tutorial \
+        --without-demo \
+        --disable-demo \
+        --without-row-help \
+        --disable-history-file \
+        --without-lisp-files \
+        --disable-wxwidgets \
+        --without-lua \
+        --without-latex \
+        --without-cairo
 
-  sed -i "s#demo ##g" Makefile
+    sed -i "s#demo ##g" Makefile
 }
 
 build()
@@ -50,8 +50,6 @@ host_install()
 
 target_install()
 {
-  $cmd_target_strip -v "$cfg_dir_toolchain_sysroot/usr/bin/gnuplot" -o 	"$cfg_dir_rootfs/usr/bin/gnuplot"
-  $cmd_cp "$cfg_dir_toolchain_sysroot/usr/share/gnuplot" 		"$cfg_dir_rootfs/usr/share"
+    $cmd_target_strip -v "$cfg_dir_toolchain_sysroot/usr/bin/gnuplot" -o 	"$cfg_dir_rootfs/usr/bin/gnuplot"
+    $cmd_cp "$cfg_dir_toolchain_sysroot/usr/share/gnuplot" 		"$cfg_dir_rootfs/usr/share"
 }
-
-

rules/gperf/host.bash

@@ -0,0 +1,34 @@
+version=\
+(
+    '3.0.4'
+)
+url=\
+(
+    "http://ftp.gnu.org/pub/gnu/gperf/gperf-$version.tar.gz"
+)
+
+md5=\
+(
+    'c1f1db32fb6598d6a93e6e88796a8632'
+)
+
+maintainer=\
+(
+    'Ricardo Martins <rasm@oceanscan-mst.com>'
+)
+
+configure()
+{
+    "../gperf-$version/configure" \
+        --prefix="$cfg_dir_toolchain"
+}
+
+build()
+{
+    $cmd_make
+}
+
+host_install()
+{
+    $cmd_make install
+}

rules/gpsd/default.bash

@@ -1,45 +0,0 @@
-version=\
-(
-    "2.95"
-)
-
-url=\
-(
-    "http://download.berlios.de/gpsd/gpsd-$version.tar.gz"
-)
-
-md5=\
-(
-    "12535a9ed9fecf9ea2c5bdc9840da5ae"
-)
-
-maintainer=\
-(
-    "Ricardo Martins <rasm@fe.up.pt>"
-)
-
-configure()
-{
-    ../gpsd-$version/configure \
-        --prefix="$cfg_dir_rootfs/usr" \
-        --target=$cfg_target_canonical \
-        --host=$cfg_target_canonical \
-        --build=$cfg_host_canonical \
-        --disable-dbus \
-        --disable-libQgpsmm
-}
-
-build()
-{
-    $cmd_make
-}
-
-target_install()
-{
-    $cmd_target_strip .libs/gpsd -o $cfg_dir_rootfs/usr/bin/gpsd &&
-    for l in .libs/libgps*so*; do
-        $cmd_target_strip "$l" -o $cfg_dir_rootfs/usr/lib/"$(basename $l)"
-    done
-
-    cp "$pkg_dir"/services/gpsd "$cfg_dir_rootfs/etc/rc.d"
-}

rules/gpsd/services/gpsd

@@ -1,14 +0,0 @@
-# Configuration Parameters
-# cfg_gpsd_dev: serial port device.
-# cfg_gpsd_baud: serial port baud rate.
-
-start()
-{
-    stty -F "$cfg_gpsd_dev" "$cfg_gpsd_baud"
-    gpsd -n "$cfg_gpsd_dev"
-}
-
-stop()
-{
-    killall gpsd
-}

rules/hidapi/default.bash

@@ -0,0 +1,66 @@
+version=\
+(
+    '0.8.0-rc1'
+)
+
+url=\
+(
+    "https://github.com/signal11/hidapi/archive/hidapi-$version.tar.gz"
+)
+
+md5=\
+(
+    '069f9dd746edc37b6b6d0e3656f47199'
+)
+
+maintainer=\
+(
+    'Ricardo Martins <rasm@oceanscan-mst.com>'
+)
+
+requires=\
+(
+    'libtool/host'
+    'libusb/default'
+    'systemd/default'
+)
+
+post_unpack()
+{
+    patches=$(ls "$pkg_dir/patches/"*.patch)
+    if [ -n "$patches" ]; then
+        cat $patches | patch -p1
+    fi
+}
+
+configure()
+{
+    cd "../hidapi-hidapi-$version" &&
+        ./bootstrap
+
+    ./configure \
+        --prefix="$cfg_dir_toolchain_sysroot/usr" \
+        --target="$cfg_target_canonical" \
+        --host="$cfg_target_canonical" \
+        --build="$cfg_host_canonical"
+}
+
+build()
+{
+    $cmd_make -C "../hidapi-hidapi-$version"
+}
+
+host_install()
+{
+    $cmd_make -C "../hidapi-hidapi-$version" install
+}
+
+target_install()
+{
+    $cmd_cp \
+        "$cfg_dir_toolchain_sysroot/usr/lib/libhidapi"*.so* \
+        "$cfg_dir_rootfs/lib" &&
+
+    $cmd_target_strip \
+            "$cfg_dir_rootfs/lib/libhidapi"*.so*
+}

rules/i2c-tools/default.bash

@@ -1,16 +1,18 @@
 version=\
 (
-    '3.0.2'
+    '3.1.0'
 )
 
+git_tag="$(echo $version | sed 's/\./-/g')"
+
 url=\
 (
-    "http://dl.lm-sensors.org/i2c-tools/releases/i2c-tools-$version.tar.bz2"
+    "https://github.com/groeck/i2c-tools/archive/V$git_tag.tar.gz"
 )
 
 md5=\
 (
-    'b546345ac19db56719dea6b8199f11e0'
+    '7ed75853fe3c3dfd2d0d70d5831abfef'
 )
 
 maintainer=\
@@ -20,12 +22,12 @@ maintainer=\
 
 build()
 {
-    $cmd_make CC="$cmd_target_cc"
+    $cmd_make -C "../i2c-tools-$git_tag" CC="$cmd_target_cc"
 }
 
 target_install()
 {
-    $cmd_target_strip tools/i2cdetect -o "$cfg_dir_rootfs/usr/bin/i2cdetect" &&
-    $cmd_target_strip tools/i2cget -o "$cfg_dir_rootfs/usr/bin/i2cget" &&
-    $cmd_target_strip tools/i2cset -o "$cfg_dir_rootfs/usr/bin/i2cset"
+    for t in i2cdetect i2cget i2cset; do
+        $cmd_target_strip "../i2c-tools-$git_tag/tools/$t" -o "$cfg_dir_rootfs/usr/bin/$t"
+    done
 }

rules/iana-etc/default.bash

@@ -0,0 +1,29 @@
+version=\
+(
+    '2.30'
+)
+
+url=\
+(
+    "http://sethwklein.net/iana-etc-$version.tar.bz2"
+)
+
+md5=\
+(
+    '3ba3afb1d1b261383d247f46cb135ee8'
+)
+
+maintainer=\
+(
+    'Ricardo Martins <rasm@fe.up.pt>'
+)
+
+build()
+{
+    $cmd_make STRIP=yes
+}
+
+target_install()
+{
+    $cmd_make DESTDIR="$cfg_dir_rootfs" install
+}

rules/isl/host.bash

@@ -0,0 +1,37 @@
+version=\
+(
+    '0.12.2'
+)
+
+url=\
+(
+    "ftp://gcc.gnu.org/pub/gcc/infrastructure/isl-$version.tar.bz2"
+)
+
+md5=\
+(
+    'e039bfcfb6c2ab039b8ee69bf883e824'
+)
+
+maintainer=\
+(
+    'Ricardo Martins <rasm@oceanscan-mst.com>'
+)
+
+configure()
+{
+    "../isl-$version/configure" \
+        --prefix="$cfg_dir_toolchain" \
+        --disable-shared \
+        --enable-static
+}
+
+build()
+{
+    $cmd_make
+}
+
+host_install()
+{
+    $cmd_make install-strip
+}

rules/kmod/common.bash

@@ -0,0 +1,19 @@
+version=\
+(
+    '21'
+)
+
+url=\
+(
+    "http://ftp.kernel.org/pub/linux/utils/kernel/kmod/kmod-$version.tar.xz"
+)
+
+md5=\
+(
+    'ee246fab2e1cba9fbdcad6a86ec31531'
+)
+
+maintainer=\
+(
+    'Ricardo Martins <rasm@oceanscan-mst.com>'
+)

rules/kmod/default.bash

@@ -0,0 +1,30 @@
+. "$pkg_common"
+
+configure()
+{
+    make distclean
+
+    ./configure \
+        --prefix="$cfg_dir_toolchain_sysroot/usr" \
+        --target="$cfg_target_canonical" \
+        --host="$cfg_target_canonical" \
+        --build="$cfg_host_canonical" \
+        --disable-static \
+        --enable-shared
+}
+
+build()
+{
+    $cmd_make
+}
+
+host_install()
+{
+    $cmd_make install
+}
+
+target_install()
+{
+    cp -a "$cfg_dir_toolchain_sysroot/usr/lib/libkmod"*.so* "$cfg_dir_rootfs/lib" &&
+        $cmd_target_strip "$cfg_dir_rootfs/lib/libkmod"*.so*
+}