systems/lauv-atom/patches/linux: change version for 4.9.

.gitignore

@@ -11,3 +11,4 @@
 /ntnu-b2xx
 /stamp9g20
 /lctr-rpi
+/lauv-atom

architectures/arm-1176.cfg

@@ -2,5 +2,5 @@ cfg_target_canonical="armv11-$cfg_glued_vendor-linux-gnueabi"
 cfg_target_linux='arm'
 cfg_target_uboot_arch='arm'
 cfg_target_gcc_flags='-O2 -pipe -funit-at-a-time -mcpu=arm1176jzf-s -mtune=arm1176jzf-s -mfloat-abi=softfp -mfpu=vfpv3'
-cfg_target_gcc_configure_flags='--with-arch=armv7-a --with-cpu=arm1176jzf-s --with-tune=arm1176jzf-s --with-fpu=vfpv3 --with-float=softfp'
+cfg_target_gcc_configure_flags='--with-arch=armv7-a --with-mcpu=arm1176jzf-s --with-mtune=arm1176jzf-s --with-fpu=vfpv3 --with-float=softfp'
 cfg_target_ar_flags='elf32-littlearm'

architectures/arm926ej-s.cfg

@@ -1,4 +1,4 @@
 cfg_target_canonical="armv5te-$cfg_glued_vendor-linux-gnueabi"
 cfg_target_linux='arm'
 cfg_target_gcc_flags='-O2 -pipe -funit-at-a-time -mtune=arm926ej-s -mfloat-abi=soft'
-cfg_target_gcc_configure_flags='--with-arch=armv5te --with-tune=arm926ej-s --with-float=soft'
+cfg_target_gcc_configure_flags='--with-arch=armv5te --with-mtune=arm926ej-s --with-float=soft'

architectures/atom.cfg

@@ -1,4 +1,4 @@
 cfg_target_canonical="atom-$cfg_glued_vendor-linux-gnu"
 cfg_target_linux='x86'
 cfg_target_linux_kernel='arch/x86/boot/bzImage'
-cfg_target_gcc_configure_flags='--with-arch=atom --with-cpu=atom --with-tune=atom'
+cfg_target_gcc_configure_flags='--with-arch=atom --with-mcpu=atom --with-mtune=atom'

architectures/atom64.cfg

@@ -1,6 +1,6 @@
 cfg_target_canonical="atom64-$cfg_glued_vendor-linux-gnu"
 cfg_target_linux='x86'
 cfg_target_gcc_flags='-O2 -pipe -march=atom -funit-at-a-time'
-cfg_target_gcc_configure_flags='--with-cpu=x86-64 --with-tune=atom'
+cfg_target_gcc_configure_flags='--with-mcpu=x86-64 --with-mtune=atom'
 cfg_target_linux_kernel='arch/x86/boot/bzImage'
 cfg_target_lib64='yes'

architectures/cortex-a8-hardfp.cfg

@@ -2,5 +2,5 @@ cfg_target_canonical="armv7-$cfg_glued_vendor-linux-gnueabihf"
 cfg_target_linux='arm'
 cfg_target_uboot_arch='arm'
 cfg_target_gcc_flags='-O2 -pipe -funit-at-a-time -mcpu=cortex-a8 -mtune=cortex-a8 -mfloat-abi=hard -mfpu=vfpv3'
-cfg_target_gcc_configure_flags='--with-arch=armv7-a --with-cpu=cortex-a8 --with-tune=cortex-a8 --with-fpu=vfpv3 --with-float=hard'
+cfg_target_gcc_configure_flags='--with-arch=armv7-a --with-mcpu=cortex-a8 --with-mtune=cortex-a8 --with-fpu=vfpv3 --with-float=hard'
 cfg_target_ar_flags='elf32-littlearm'

architectures/cortex-a8.cfg

@@ -2,5 +2,5 @@ cfg_target_canonical="armv7-$cfg_glued_vendor-linux-gnueabi"
 cfg_target_linux='arm'
 cfg_target_uboot_arch='arm'
 cfg_target_gcc_flags='-O2 -pipe -funit-at-a-time -mcpu=cortex-a8 -mtune=cortex-a8 -mfloat-abi=softfp -mfpu=vfpv3'
-cfg_target_gcc_configure_flags='--with-arch=armv7-a --with-cpu=cortex-a8 --with-tune=cortex-a8 --with-fpu=vfpv3 --with-float=softfp'
+cfg_target_gcc_configure_flags='--with-arch=armv7-a --with-mcpu=cortex-a8 --with-mtune=cortex-a8 --with-fpu=vfpv3 --with-float=softfp'
 cfg_target_ar_flags='elf32-littlearm'

architectures/cortex-a9-hardfp.cfg

@@ -2,5 +2,5 @@ cfg_target_canonical="armv7-$cfg_glued_vendor-linux-gnueabihf"
 cfg_target_linux='arm'
 cfg_target_uboot_arch='arm'
 cfg_target_gcc_flags='-O2 -pipe -funit-at-a-time -mcpu=cortex-a9 -mtune=cortex-a9 -mfloat-abi=hard -mfpu=vfpv3'
-cfg_target_gcc_configure_flags='--with-arch=armv7-a --with-cpu=cortex-a9 --with-tune=cortex-a9 --with-fpu=vfpv3 --with-float=hard'
+cfg_target_gcc_configure_flags='--with-arch=armv7-a --with-mcpu=cortex-a9 --with-mtune=cortex-a9 --with-fpu=vfpv3 --with-float=hard'
 cfg_target_ar_flags='elf32-littlearm'

architectures/geode.cfg

@@ -1,3 +1,3 @@
 cfg_target_canonical="geode-$cfg_glued_vendor-linux-gnu"
 cfg_target_linux='x86'
-cfg_target_gcc_configure_flags='--with-arch=geode --with-cpu=geode --with-tune=geode'
+cfg_target_gcc_configure_flags='--with-arch=geode --with-mcpu=geode --with-mtune=geode'

architectures/i586.cfg

@@ -1,5 +1,5 @@
 cfg_target_canonical="i586-$cfg_glued_vendor-linux-gnu"
 cfg_target_linux='x86'
-cfg_target_gcc_configure_flags='--with-arch=i586 --with-cpu=i586 --with-tune=i586'
+cfg_target_gcc_configure_flags='--with-arch=i586 --with-mcpu=i586 --with-mtune=i586'
 cfg_target_gcc_flags='-O2 -pipe -march=i586 -funit-at-a-time'
 cfg_target_glibc_configure_flags='--with-cpu=i586'

architectures/i686.cfg

@@ -1,6 +1,6 @@
 cfg_target_canonical="i686-$cfg_glued_vendor-linux-gnu"
 cfg_target_linux='x86'
 cfg_target_gcc_flags='-O2 -pipe -march=i686 -funit-at-a-time'
-cfg_target_gcc_configure_flags='--with-cpu=i686'
+cfg_target_gcc_configure_flags='--mwith-cpu=i686'
-cfg_target_glibc_configure_flags='--with-cpu=i686'
+cfg_target_glibc_configure_flags='--with-mcpu=i686'
 cfg_target_linux_kernel='arch/x86/boot/bzImage'

architectures/mips32r2.cfg

@@ -1,5 +1,5 @@
 cfg_target_canonical="mipsisa32r2-$cfg_glued_vendor-linux-gnu"
 cfg_target_linux='mips'
 cfg_target_gcc_flags='-O2 -pipe -funit-at-a-time -mabi=32 -mips32r2 -mtune=mips32r2 -msoft-float'
-cfg_target_gcc_configure_flags='--with-abi=32 --with-tune=mips32r2 --with-float=soft'
+cfg_target_gcc_configure_flags='--with-abi=32 --with-mtune=mips32r2 --with-float=soft'
 cfg_target_glibc_configure_flags='--without-fp'

architectures/xscale-iwmmxt.cfg

@@ -1,4 +1,4 @@
 cfg_target_canonical="armv5-$cfg_glued_vendor-linux-gnueabi"
 cfg_target_linux='arm'
 cfg_target_gcc_flags='-O2 -pipe -funit-at-a-time -mcpu=iwmmxt -mtune=iwmmxt -mfloat-abi=soft'
-cfg_target_gcc_configure_flags='--with-arch=iwmmxt --with-cpu=iwmmxt --with-tune=iwmmxt --with-float=soft'
+cfg_target_gcc_configure_flags='--with-arch=iwmmxt --with-mcpu=iwmmxt --with-mtune=iwmmxt --with-float=soft'

architectures/xscale.cfg

@@ -1,4 +1,4 @@
 cfg_target_canonical="armv5-$cfg_glued_vendor-linux-gnueabi"
 cfg_target_linux='arm'
 cfg_target_gcc_flags='-O2 -pipe -funit-at-a-time -mtune=xscale -mfloat-abi=soft'
-cfg_target_gcc_configure_flags='--with-arch=armv5te --with-tune=xscale --with-float=soft'
+cfg_target_gcc_configure_flags='--with-arch=armv5te --with-mtune=xscale --with-float=soft'

docker/Dockerfile

@@ -20,19 +20,31 @@
 # Author: Ricardo Martins                                                 #
 ###########################################################################
 
-FROM debian:8
+FROM debian:9
 
 MAINTAINER Ricardo Martins <rasm@oceanscan-mst.com>
+MAINTAINER Pedro Gonçalves <pedro@lsts.pt>
 
 ENV DEBIAN_FRONTEND noninteractive
 
 # Update distro.
+RUN echo "deb http://ftp.us.debian.org/debian testing non-free contrib" >> /etc/apt/sources.list
+RUN apt-get update
+RUN apt-get install -y gnupg2
+RUN apt-key adv --recv-keys --keyserver keyserver.ubuntu.com 40976EAF437D05B5
+RUN apt-get install -y apt-utils
+RUN apt-get install -y gpgv
 RUN apt-get update -y
+RUN apt-get install -y apt-utils
 RUN apt-get dist-upgrade -y
+RUN apt-get install -y bash-completion
 RUN apt-get install -y wget
 RUN apt-get install -y bzip2
 RUN apt-get install -y git
 RUN apt-get install -y g++-multilib
-RUN apt-get install -y cmake
 RUN apt-get install -y file
 RUN apt-get install -y kmod
+RUN apt-get install -y vim
+RUN apt-get install -y nasm
+RUN apt-get install -y build-essential
+RUN apt-get install -y make

docker/Makefile

@@ -21,11 +21,24 @@
 ###########################################################################
 
 TAG     := glued
-VERSION := 2016.05.0
+VERSION := 2020.07.24
 VOLUME  := $(CURDIR)/..
+DNS     := 8.8.8.8
 
 all:
 	docker build -t $(TAG):$(VERSION) .
 
 shell:
-	docker run -w $(VOLUME) -i -a stdin -a stdout -v $(VOLUME):$(VOLUME) -t $(TAG):$(VERSION)
+	docker run -w $(VOLUME) --dns=$(DNS) -i -a stdin -a stdout -v $(VOLUME):$(VOLUME) -t $(TAG):$(VERSION)
+
+clean:
+	@echo "* Stopping docker service..."
+	@sudo systemctl stop docker
+	@echo "* Cleaning docker service..."
+	@sudo rm -rf /var/lib/docker
+	@echo "* Starting docker service..."
+	@sudo systemctl start docker
+	@echo "* Done."
+
+delete_img:
+	@sudo docker system prune -a

mkconfig.bash

@@ -23,7 +23,7 @@
 ###########################################################################
 
 # Config: GLUED version.
-cfg_glued_version='2017.11'
+cfg_glued_version='2020.07'
 # Config: GLUED vendor.
 cfg_glued_vendor='lsts'
 

mkpackage.bash

@@ -71,22 +71,22 @@ download()
             fi
         fi
 
-	# First try LSTS mirror.
+       # First try LSTS mirror.
-	lsts_url="https://lsts.pt/glued/$(basename $u)"
+	      lsts_url="https://www.lsts.pt/glued/validPackages/$(basename $u)"
-        download_tool "$lsts_url" "$cfg_dir_downloads/$file"
+              download_tool "$lsts_url" "$cfg_dir_downloads/$file"
-        if [ $? -ne 0 ]; then
+              if [ $? -ne 0 ]; then
-	    # Then try OceanScan-MST mirror.
+	          # Then try OceanScan-MST mirror.
-            omst_url="http://www.omst.pt/glued/$(basename $u)"
+                  omst_url="http://www.omst.pt/glued/$(basename $u)"
-            download_tool "$omst_url" "$cfg_dir_downloads/$file"
+                  download_tool "$omst_url" "$cfg_dir_downloads/$file"
-            if [ $? -ne 0 ]; then
+                  if [ $? -ne 0 ]; then
-		# On failure try upstream URL.
+		      # On failure try upstream URL.
-		download_tool "$u" "$cfg_dir_downloads/$file"
+		      download_tool "$u" "$cfg_dir_downloads/$file"
-		if [ $? -ne 0 ]; then
+		      if [ $? -ne 0 ]; then
-                    echo "ERROR: download failed"
+                          echo "ERROR: download failed"
-                    exit 1
+                          exit 1
-		fi
+		      fi
-            fi
+                  fi
-	fi
+	      fi
 
         md5="$(md5sum_tool "$cfg_dir_downloads/$file")"
         if [ "$s" != "$md5" ]; then

rules/binutils/cross.bash

@@ -1,6 +1,6 @@
 version=\
 (
-    '2.25.1'
+    '2.25'
 )
 
 url=\
@@ -10,7 +10,7 @@ url=\
 
 md5=\
 (
-    'ac493a78de4fee895961d025b7905be4'
+    'd9f3303f802a5b6b0bb73a335ab89d66'
 )
 
 maintainer=\

rules/bzip2/common.bash

@@ -5,7 +5,7 @@ version=\
 
 url=\
 (
-    "http://bzip.org/1.0.6/bzip2-$version.tar.gz"
+    "https://sourceforge.net/projects/bzip2/files/bzip2-$version.tar.gz"
 )
 
 md5=\

rules/elfutils/default.bash

@@ -0,0 +1,42 @@
+version=\
+(
+    '0.180'
+)
+
+url=\
+(
+    "ftp://sourceware.org/pub/elfutils/$version/elfutils-$version.tar.bz2"
+)
+
+md5=\
+(
+    '23feddb1b3859b03ffdbaf53ba6bd09b'
+)
+
+requires=\
+(
+    'zlib/host'
+    'zlib/default'
+)
+
+configure()
+{
+    MAKEINFO='/bin/true' \
+    "./configure" --disable-debuginfod \
+        --build="$cfg_host_canonical" \
+        --target="$cmd_target_prefix" \
+        --host="$cfg_host_canonical" \
+        --prefix="$cfg_dir_toolchain" \
+        CC="$cmd_target_cc" \
+        CXX="$cmd_target_cxx"
+}
+
+build()
+{
+    $cmd_make
+}
+
+host_install()
+{
+    $cmd_make install
+}

rules/gcc/common.bash

@@ -1,16 +1,16 @@
 version=\
 (
-    '4.9.3'
+    '9.3.0'
 )
 
 url=\
 (
-    "http://mirrors.kernel.org/gnu/gcc/gcc-$version/gcc-$version.tar.bz2"
+    "http://mirrors.kernel.org/gnu/gcc/gcc-$version/gcc-$version.tar.gz"
 )
 
 md5=\
 (
-    '6f831b4d251872736e8e9cc09746f327'
+    '9b7e8f6cfad96114e726c752935af58a'
 )
 
 build_dir=$pkg_var

rules/glibc/common.bash

@@ -1,6 +1,6 @@
 version=\
 (
-    '2.22'
+    '2.26'
 )
 
 url=\
@@ -10,7 +10,7 @@ url=\
 
 md5=\
 (
-    'e51e02bf552a0a1fbbdc948fb2f5e83c'
+    '102f637c3812f81111f48f2427611be1'
 )
 
 maintainer=\

rules/gmp/host.bash

@@ -1,6 +1,6 @@
 version=\
 (
-    '5.0.4'
+    '6.1.2'
 )
 
 url=\
@@ -10,7 +10,7 @@ url=\
 
 md5=\
 (
-    '50c3edcb7c9438e04377ee9a1a061b79'
+    '8ddbb26dc3bd4e2302984debba1406a5'
 )
 
 maintainer=\

rules/htop/default.bash

@@ -1,6 +1,6 @@
 version=\
 (
-    '2.0.2'
+    '2.2.0'
 )
 
 url=\
@@ -10,7 +10,7 @@ url=\
 
 md5=\
 (
-    '7d354d904bad591a931ad57e99fea84a'
+    '0d816b6beed31edc75babcfbf863ffa8'
 )
 
 maintainer=\
@@ -18,6 +18,11 @@ maintainer=\
     'Jose Pinto <zepinto@lsts.pt>'
 )
 
+requires=\
+(
+    'ncurses/default'
+)
+
 build()
 {
     $cmd_make
@@ -26,7 +31,15 @@ build()
 configure()
 {
     cd "../htop-$version"
-    ./configure --disable-unicode --prefix="${cfg_dir_rootfs}"
+    ./configure --disable-unicode \
+    --disable-dependency-tracking \
+    --build="$cfg_host_canonical" \
+    --host="$cfg_host_canonical" \
+    --prefix="$cfg_dir_rootfs" \
+    HTOP_NCURSESW_CONFIG_SCRIPT="$cfg_dir_toolchain_sysroot/usr/bin/ncursesw6-config" \
+    HTOP_NCURSES_CONFIG_SCRIPT="$cfg_dir_toolchain_sysroot/usr/bin/ncurses6-config" \
+    CC="$cmd_target_cc" \
+    CXX="$cmd_target_cxx"
 }
 
 target_install()

rules/libdc1394/default.bash

@@ -19,6 +19,7 @@ configure()
         --prefix="$cfg_dir_toolchain_sysroot/usr" \
         --target="$cfg_target_canonical" \
         --host="$cfg_target_canonical" \
+        --disable-examples \
         --build="$cfg_host_canonical"
 }
 

rules/linux-headers/cross.bash

@@ -1,6 +1,6 @@
 version=\
 (
-    '4.4.66'
+    '4.9.99'
 )
 
 url=\
@@ -10,7 +10,7 @@ url=\
 
 md5=\
 (
-    '5353de56bf4621a35afc4384c7e51f30'
+    'aecc1118040df0c18dbca9f1f163ef84'
 )
 
 maintainer=\

rules/linux/default.bash

@@ -1,6 +1,6 @@
 version=\
 (
-    '4.4.66'
+    '4.9.99'
 )
 
 url=\
@@ -10,7 +10,7 @@ url=\
 
 md5=\
 (
-    '5353de56bf4621a35afc4384c7e51f30'
+    'aecc1118040df0c18dbca9f1f163ef84'
 )
 
 maintainer=\
@@ -23,6 +23,7 @@ requires=\
     'bc/host'
     'kmod/host'
     'lz4/host'
+#    'elfutils/default'
 )
 
 # This variable is updated by find_patches().

rules/mpc/host.bash

@@ -1,16 +1,16 @@
 version=\
 (
-    "0.9"
+    "1.0.2"
 )
 
 url=\
 (
-    "http://www.multiprecision.org/mpc/download/mpc-$version.tar.gz"
+    "https://ftp.gnu.org/gnu/mpc/mpc-$version.tar.gz"
 )
 
 md5=\
 (
-    "0d6acab8d214bd7d1fbbc593e83dd00d"
+    "68fadff3358fb3e7976c7a398a0af4c3"
 )
 
 maintainer=\

rules/mpfr/host.bash

@@ -1,6 +1,6 @@
 version=\
 (
-    '3.1.3'
+    '3.1.5'
 )
 
 url=\
@@ -10,7 +10,7 @@ url=\
 
 md5=\
 (
-    '5fdfa3cfa5c86514ee4a241a1affa138'
+    'b1d23a55588e3b2a13e3be66bc69fd8d'
 )
 
 maintainer=\

rules/ncurses/common.bash

@@ -1,6 +1,6 @@
 version=\
 (
-    "5.9"
+    "6.2"
 )
 
 url=\
@@ -10,7 +10,7 @@ url=\
 
 md5=\
 (
-    "8cb9c412e5f2d96bc6f459aa8c6282a1"
+    "e812da327b1c2214ac1aed440ea3ae8d"
 )
 
 maintainer=\

rules/ncurses/default.bash

@@ -10,7 +10,10 @@ configure_common()
         --target="$cfg_target_canonical" \
         --host="$cfg_target_canonical" \
         --build="$cfg_host_canonical" \
+        --with-build-cc="$cmd_target_cc" \
+        --with-build-cpp="$cmd_target_cpp" \
 	--with-shared \
+  --enable-ext-colors \
 	--enable-pc-files \
 	--without-progs \
 	--without-tests \

rules/ntp/default.bash

@@ -5,7 +5,7 @@ version=\
 
 url=\
 (
-    "ftp://gentoo.mirrors.ovh.net/gentoo-distfiles/distfiles/ntp-$version.tar.gz"
+    "ftp://mirror.ovh.net/gentoo-distfiles/distfiles/ntp-$version.tar.gz"
 )
 
 md5=\

rules/pciutils/default.bash

@@ -5,7 +5,7 @@ version=\
 
 url=\
 (
-    "ftp://atrey.karlin.mff.cuni.cz/pub/linux/pci/pciutils-$version.tar.gz"
+    "http://ftp.riken.jp/Linux/kernel.org/software/utils/pciutils/pciutils-$version.tar.gz"
 )
 
 md5=\

rules/rsync/default.bash

@@ -5,12 +5,12 @@ version=\
 
 url=\
 (
-    "http://www.samba.org/ftp/rsync/rsync-$version.tar.gz"
+    "https://github.com/WayneD/rsync/archive/v$version.tar.gz"
 )
 
 md5=\
 (
-    '43bd6676f0b404326eee2d63be3cdcfe'
+    'e559dd27216db757f4b34d64b8bf789e'
 )
 
 maintainer=\

rules/syslinux/common.bash

@@ -1,16 +1,16 @@
 version=\
 (
-    '3.82'
+    '6.04'
 )
 
 url=\
 (
-    "https://www.kernel.org/pub/linux/utils/boot/syslinux/3.xx/syslinux-$version.tar.bz2"
+    "https://mirrors.edge.kernel.org/pub/linux/utils/boot/syslinux/Testing/$version/syslinux-$version-pre1.tar.gz"
 )
 
 md5=\
 (
-    'c9f4e73e385c86b3a8faf9b615a04836'
+    'fefbc39becb619339fc22c91ec7112ab'
 )
 
 maintainer=\
@@ -22,4 +22,11 @@ requires=\
 (
     'nasm/host'
     'python_host/host'
+    'uuid/default'
 )
+
+post_unpack()
+{
+  cd ..
+  $cmd_cp syslinux-$version-pre1/* syslinux-$version/
+}

rules/syslinux/default.bash

@@ -2,9 +2,9 @@ source $pkg_common
 
 host_install()
 {
-    $cmd_make clean &&
+    $cmd_make_single clean &&
-    $cmd_make &&
+    $cmd_make_single CC="$cmd_target_cc" &&
-    cp -d extlinux/extlinux ${cfg_dir_toolchain}/bin/extlinux
+    cp -d bios/extlinux/extlinux ${cfg_dir_toolchain}/bin/extlinux
 }
 
 target_install()
@@ -19,11 +19,11 @@ target_install()
         export cfg_kernel_boot_dev='/dev/sda1'
     fi
 
-    $cmd_make clean &&
+    $cmd_make_single clean &&
-    $cmd_make CC="$cmd_target_cc" &&
+    $cmd_make_single CC="$cmd_target_cc" &&
-    $cmd_target_strip extlinux/extlinux -o $cfg_dir_rootfs/usr/sbin/extlinux &&
+    $cmd_target_strip bios/extlinux/extlinux -o $cfg_dir_rootfs/usr/sbin/extlinux &&
     $cmd_mkdir $cfg_dir_rootfs/boot/extlinux &&
-    cp -d mbr/mbr.bin $cfg_dir_rootfs/boot/extlinux &&
+    cp -d bios/mbr/mbr.bin $cfg_dir_rootfs/boot/extlinux &&
     (echo $console ; cat "$pkg_dir"/extlinux.conf) \
          | sed "s%\$cfg_kernel_extra_args%$cfg_kernel_extra_args%g" \
          | sed "s%\$cfg_kernel_boot_dev%$cfg_kernel_boot_dev%g" \

rules/syslinux/host.bash

@@ -2,9 +2,9 @@ source $pkg_common
 
 host_install()
 {
-    $cmd_make clean &&
+    $cmd_make_single clean &&
-    $cmd_make &&
+    $cmd_make_single CC="$cmd_target_cc" &&
-    cp -d extlinux/extlinux ${cfg_dir_toolchain}/bin &&
+    cp -d bios/extlinux/extlinux ${cfg_dir_toolchain}/bin &&
     mkdir -p ${cfg_dir_toolchain}/boot &&
-    cp -d mbr/mbr.bin ${cfg_dir_toolchain}/boot/mbr.bin
+    cp -d bios/mbr/mbr.bin ${cfg_dir_toolchain}/boot/mbr.bin
 }

rules/uuid/default.bash

@@ -0,0 +1,10 @@
+maintainer=\
+(
+    'Pedro Gonçalves <pedro@lsts.pt>'
+)
+
+host_install()
+{
+  cp -rv $cfg_dir_toolchain/include/uuid $cfg_dir_toolchain_sysroot/usr/include/
+  $cmd_cp $cfg_dir_toolchain/lib/libuuid* $cfg_dir_toolchain_sysroot/usr/lib/
+}

systems/lauv-atom/aries-atom-testbed.cfg

@@ -0,0 +1,2 @@
+cfg_hostname='aries-atom-testbed'
+cfg_eth_ext_ip='10.0.200.66'

systems/lauv-atom/lauv-atom-testbed.cfg

@@ -1,2 +0,0 @@
-cfg_hostname='lauv-atom-testbed'
-cfg_eth_ext_ip='10.0.200.92'

systems/lauv-atom/patches/linux/4.9/00-aim104-com8.patch

@@ -0,0 +1,85 @@
+diff -Nru a/drivers/tty/serial/8250/8250_aim104_com8.c b/drivers/tty/serial/8250/8250_aim104_com8.c
+--- a/drivers/tty/serial/8250/8250_aim104_com8.c	1970-01-01 01:00:00.000000000 +0100
++++ b/drivers/tty/serial/8250/8250_aim104_com8.c	2012-05-31 13:13:13.794585528 +0100
+@@ -0,0 +1,51 @@
++#include <linux/module.h>
++#include <linux/init.h>
++#include <linux/serial_8250.h>
++
++#define PORT(_base,_irq)				\
++	{						\
++		.iobase		= _base,		\
++		.irq		= _irq,			\
++		.uartclk	= 1843200,		\
++		.iotype		= UPIO_PORT,		\
++		.flags		= UPF_BOOT_AUTOCONF | UPF_BUGGY_UART,	\
++	}
++
++static struct plat_serial8250_port aim104_data[] = {
++	PORT(0x100, 10),
++	PORT(0x108, 10),
++	PORT(0x110, 10),
++	PORT(0x118, 10),
++	PORT(0x120, 10),
++	PORT(0x128, 10),
++	PORT(0x130, 10),
++	PORT(0x138, 10),
++	PORT(0x300, 6),
++	PORT(0x308, 6),
++	PORT(0x310, 6),
++	PORT(0x318, 6),
++	PORT(0x320, 6),
++	PORT(0x328, 6),
++	PORT(0x330, 6),
++	PORT(0x338, 6),
++	{ },
++};
++
++static struct platform_device exar_device = {
++	.name			= "serial8250",
++	.id			= PLAT8250_DEV_PLATFORM,
++	.dev			= {
++		.platform_data	= aim104_data,
++	},
++};
++
++static int __init exar_init(void)
++{
++	return platform_device_register(&exar_device);
++}
++
++module_init(exar_init);
++
++MODULE_AUTHOR("Ricardo Martins");
++MODULE_DESCRIPTION("8250 serial probe module for Eurotech AIM104-COM8");
++MODULE_LICENSE("GPL");
+diff -Nru a/drivers/tty/serial/8250/Kconfig b/drivers/tty/serial/8250/Kconfig
+--- a/drivers/tty/serial/8250/Kconfig	2012-05-21 19:42:51.000000000 +0100
++++ b/drivers/tty/serial/8250/Kconfig	2012-05-31 13:14:45.942587436 +0100
+@@ -202,6 +202,15 @@
+ 	  To compile this driver as a module, choose M here: the module
+ 	  will be called 8250_exar_st16c554.
+
++config SERIAL_8250_AIM104_COM8
++	tristate "Support Eurotech AIM104-COM8 Dual Quad UART"
++	depends on SERIAL_8250 != n && ISA && SERIAL_8250_MANY_PORTS
++	help
++	  Eurotech AIM104-COM8 Dual Quad UART.
++
++	  To compile this driver as a module, choose M here: the module
++	  will be called 8250_aim104_com8.
++
+ config SERIAL_8250_HUB6
+ 	tristate "Support Hub6 cards"
+ 	depends on SERIAL_8250 != n && ISA && SERIAL_8250_MANY_PORTS
+diff -Nru a/drivers/tty/serial/8250/Makefile b/drivers/tty/serial/8250/Makefile
+--- a/drivers/tty/serial/8250/Makefile	2012-05-21 19:42:51.000000000 +0100
++++ b/drivers/tty/serial/8250/Makefile	2012-05-31 13:15:15.366347016 +0100
+@@ -14,6 +14,7 @@
+ obj-$(CONFIG_SERIAL_8250_ACCENT)	+= 8250_accent.o
+ obj-$(CONFIG_SERIAL_8250_BOCA)		+= 8250_boca.o
+ obj-$(CONFIG_SERIAL_8250_EXAR_ST16C554)	+= 8250_exar_st16c554.o
++obj-$(CONFIG_SERIAL_8250_AIM104_COM8)	+= 8250_aim104_com8.o
+ obj-$(CONFIG_SERIAL_8250_HUB6)		+= 8250_hub6.o
+ obj-$(CONFIG_SERIAL_8250_MCA)		+= 8250_mca.o
+ obj-$(CONFIG_SERIAL_8250_FSL)		+= 8250_fsl.o